Author Topic: [WTS] nubbinator's wood key cap pullers & sleeved cables [WTTF] White/Pink MX CC  (Read 51052 times)

0 Members and 1 Guest are viewing this topic.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
All my cables use high quality MDPC, Bitspower, or Kobra HD sleeving unless you specify you want paracord and, aside from paracord cables, all use 24/28 AWG wires giving you a nice, higher gauge wire for power delivery.  I refuse to use low cost, low quality alternatives like PET sleeving since I want you to have a high quality cable that lasts.

If you got a Hardcore White MX CC Skull in the latest Clack sale you're willing to part for at cost or near cost or have one you're willing to trade, let me know.  I have tons of goodies to trade for them and more being made.

I've been experimenting with making my own key cap pullers for a little while now.  I've wanted a wood puller for a while, but was never happy with the ones I saw being sold.  As such, I've turned a few for myself and a some to sell off to help me continue my experiments with keyboards and key cap making and the like. 

 So without further ado:

For Sale or Trade

Key Cap Pullers/

These are handmade and tested to make sure they'll hold up.  The wire is springy and flexible like any other wire key cap puller.  Just slide the wires over the cap, twist it to the side to catch the corners of the cap, and rock it back and forth to carefully pull the cap off like you would with any other wire key cap puller. 

  • Bloodwood key cap pullers (more info on Bloodwood).  Bloodwood is a resilient, dense, and very hard wood.  Asking $28 + shipping since Bloodwood is an expensive and a very hard to work with wood.




More


  • Verawood/Argentine Lignum Vitae key cap puller (more info on Verawood).  Verawood is a resilient, dense, and very hard wood.  Asking $27 + shipping since Verawood is a moderately expensive wood.  There's a slight color shift in the picture due to the evening sun and it's a little greener in color in person.



  • Black Palm key cap puller (more info on Black Palm).  Black Palm is an interesting wood since, technically, it's a monocot, making it more in line with reeds and grasses, bamboo, banana, corn, etc.  Asking $27 + shipping since Black Palm is a moderately priced wood and it's very difficult to work with given the fact that it's a dual density wood.  There's a slight color shift in the picture due to the evening sun. There is also a small scratch on it from the lathe tools that I didn't get a chance to sand out.




I also have handles made in Birch and Maple and can make some up in Walnut and several others.  Let me know and I can get you some pics and make one up for you.  Key cap pullers should be paid with as a gift or buyer pays Paypal fees.


  • Custom sleeved 6' USB A to USB mini B cable.  Sleeved with Bitspower and paracord.  Asking $25 shipped CONUS.




  • Custom sleeved 4' 10" USB A to USB mini B cable.  Sleeved with ModDIY sleeving.   Asking $21 shipped CONUS.




  • Custom sleeved 4' USB A to USB mini B cable.  Sleeved with ModDIY sleeving.  Asking $20 shipped CONUS.



  • MDPC colors available for custom length cables.



Parts are also here for removable Filco cables.  Let me know if you'd like one.



I also have some ever changing colors for 2.5' cables.


I'll also have more key cap pullers added in the future and some sleeved USB cables for sale.

All prices aside from key cap pullers include Paypal or Amazon Payment fees.

Wanted (trades only)

  • MX skull CCs
  • CCnG base set and modifiers
  • Other interesting offers


Sold/Traded


Walnut keycap puller

More


~2 1/2" USB cables.

More







~3' USB cables

More









~4' USB cables

More










~5' USB Cables

More



6' cables

More












« Last Edit: Fri, 04 October 2013, 14:14:36 by nubbinator »

Offline codyeatworld

  • * Destiny Supporter
  • Trade Count: (0)
  • Posts: 944
  • Location: Bay Area, California
Re: [FS] nubbinator's hand made key cap pullers and various other things
« Reply #1 on: Thu, 30 May 2013, 19:59:06 »
That keypuller looks awesome! GLWS




Offline kelske

  • Trade Count: (0)
  • Posts: 311
  • Location: NZ
  • The North Borders
Re: [FS] nubbinator's hand made key cap pullers and various other things
« Reply #2 on: Thu, 30 May 2013, 20:00:23 »
It's beautiful! :'(

GLWS bro can't wait to pick one of these up once you've got some other design ideas flowing
HHKB Type-S 55g - FC660M - FC210TP

Offline winged mantis

  • Trade Count: (0)
  • Posts: 19
  • Location: United States
Re: [FS] nubbinator's hand made key cap pullers and various other things
« Reply #3 on: Thu, 30 May 2013, 21:51:02 »
What size are the radiator barbs?

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [FS] nubbinator's hand made key cap pullers and various other things
« Reply #4 on: Thu, 30 May 2013, 21:58:07 »
What size are the radiator barbs?

1/2"

Offline Paranoid

  • Trade Count: (0)
  • Posts: 279
  • Location: Belgium
Re: [FS] nubbinator's hand made key cap pullers and various other things
« Reply #5 on: Fri, 31 May 2013, 01:54:13 »
Nice work man! GLWS :)

Offline BlueMica

  • Trade Count: (0)
  • Posts: 25
  • Location: San Francisco, California
  • 1994 RX-7 R2 GT35R 500+AWHP 2004 Subaru STI GT45R
Re: [FS] nubbinator's hand made key cap pullers and various other things
« Reply #6 on: Fri, 31 May 2013, 02:07:33 »
Is the Liang DDC the 3.1v or the 3.2v version?
« Last Edit: Fri, 31 May 2013, 02:10:01 by BlueMica »
Noppoo Choc Mini Black POM Cherry MX Red | Filco MJ1 Cherry MX Blue | Realforce 87U "EK-Edition" |1989 IBM SSK | Filco Ninja Cherry MX Brown | Filco Zero TKL

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [FS] nubbinator's hand made key cap pullers and various other things
« Reply #7 on: Fri, 31 May 2013, 02:22:23 »
Is the Liang DDC the 3.1v or the 3.2v version?

The PCB states it as DDC v5.4

Offline Dubsgalore

  • Banned
  • Trade Count: (0)
  • Posts: 2849
  • Location: 75% You have received a warning for attempting to circumvent the classifieds rules
    • Dubs - Sneakers, Keyboards, and Life
Re: [FS] nubbinator's hand made key cap pullers and various other things
« Reply #8 on: Fri, 31 May 2013, 11:58:10 »
Nubb that walnut keycap puller..it's beautiful :')

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Price amended to include shipping.  I can also do custom sleeved USB cables like some of the ones I'm making seen here.  Shipping will be included if bought with a keycap puller.

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Posts: 6562
  • (ツ)@@@. crankypants
nice lathe work!

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Keycap puller is being traded to zoolzoo.  More to come.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Sold the radiator and G5 DDC pump to winged mantis.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Added new cables.

Offline The_Beast

  • * Maker
  • Trade Count: (0)
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Damn, I wish I needed a cable. That purple would have been mine!
Vendor Status: Sadly, not taking any orders/pre-orders at this time

Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Damn, I wish I needed a cable. That purple would have been mine!

And I would have gladly traded it for your switch top tool.  If you decide you need one or want any other colors, I'm sure we could work something out.  I'll also be adding a 6' green, yellow, and carbon fiber one shortly.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #18 on: Sun, 09 June 2013, 17:31:49 »
USB A finally came in from Bhiner, so the cables for sale are either done or in the process of being finished.

Offline VesperSAINT

  • vpsert
  • Trade Count: (0)
  • Posts: 5588
  • Location: Tampa, Flouda
  • #CustomKorean
    • My Youtube channel with some keyboard videos
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #19 on: Sun, 09 June 2013, 18:34:05 »



These 2 are my favorite but I especially love the purple one! Sooo tempted!

Offline Jocelyn

  • Trade Count: (0)
  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #20 on: Sun, 09 June 2013, 18:57:55 »
These 2 are my favorite but I especially love the purple one! Sooo tempted!

Get it!! I have the same purple and it's a very nice color:)

Offline VesperSAINT

  • vpsert
  • Trade Count: (0)
  • Posts: 5588
  • Location: Tampa, Flouda
  • #CustomKorean
    • My Youtube channel with some keyboard videos
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #21 on: Sun, 09 June 2013, 19:01:33 »
These 2 are my favorite but I especially love the purple one! Sooo tempted!

Get it!! I have the same purple and it's a very nice color:)

Oh you temptress, you ~ How long are these cables btw???

Offline Jocelyn

  • Trade Count: (0)
  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #22 on: Sun, 09 June 2013, 19:09:19 »
The first set of three are 3' and the second set of three are 4'

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #23 on: Sun, 09 June 2013, 19:22:46 »
Oh you temptress, you ~ How long are these cables btw???

Like Jocelyn said, the white, purple, and red/blue are 3', the multicolor, red/black, and red/silver/black are 4'.  I'll also be adding a green, yellow, and carbon fiber cable at 6'.  I can also make some custom length or colors.

Offline VesperSAINT

  • vpsert
  • Trade Count: (0)
  • Posts: 5588
  • Location: Tampa, Flouda
  • #CustomKorean
    • My Youtube channel with some keyboard videos
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #24 on: Sun, 09 June 2013, 19:25:48 »
Oh you temptress, you ~ How long are these cables btw???

Like Jocelyn said, the white, purple, and red/blue are 3', the multicolor, red/black, and red/silver/black are 4'.  I'll also be adding a green, yellow, and carbon fiber cable at 6'.  I can also make some custom length or colors.

oooooo~ I have my tower sitting on the floor so I'll probably need longer cables ~ If you later make a purple one in 6' or so, I'll be sure to grab that one ~

Offline Jocelyn

  • Trade Count: (0)
  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #25 on: Sun, 09 June 2013, 19:40:29 »
Oh you temptress, you ~ How long are these cables btw???

Like Jocelyn said, the white, purple, and red/blue are 3', the multicolor, red/black, and red/silver/black are 4'.  I'll also be adding a green, yellow, and carbon fiber cable at 6'.  I can also make some custom length or colors.

oooooo~ I have my tower sitting on the floor so I'll probably need longer cables ~ If you later make a purple one in 6' or so, I'll be sure to grab that one ~

Oh the irony :)

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #26 on: Sun, 09 June 2013, 19:42:34 »
oooooo~ I have my tower sitting on the floor so I'll probably need longer cables ~ If you later make a purple one in 6' or so, I'll be sure to grab that one ~

I should be able to get one done in purple for you this week.  I actually have enough of the purple on hand to do a couple cables.

Offline VesperSAINT

  • vpsert
  • Trade Count: (0)
  • Posts: 5588
  • Location: Tampa, Flouda
  • #CustomKorean
    • My Youtube channel with some keyboard videos
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #27 on: Sun, 09 June 2013, 20:00:40 »
Oh the irony :)

Huhuhu ~

oooooo~ I have my tower sitting on the floor so I'll probably need longer cables ~ If you later make a purple one in 6' or so, I'll be sure to grab that one ~

I should be able to get one done in purple for you this week.  I actually have enough of the purple on hand to do a couple cables.

That'd be awesome too :) BUTTTTTT Don't do it yet (at least for mine) because I'm going to have to do a detachable cable mod for my Filco first!

Man, I want to get my Filco a pretty cable but I don't know if I can do this detachable cable mod... but that's another discussion :)) Do you by any chance have the parts to make a cable for a Filco???
« Last Edit: Sun, 09 June 2013, 20:25:54 by VesperSAINT »

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #28 on: Mon, 10 June 2013, 11:36:56 »
That'd be awesome too :) BUTTTTTT Don't do it yet (at least for mine) because I'm going to have to do a detachable cable mod for my Filco first!

Man, I want to get my Filco a pretty cable but I don't know if I can do this detachable cable mod... but that's another discussion :)) Do you by any chance have the parts to make a cable for a Filco???

I don't right now.  I only have USB Mini B and USB A housings right now.

Offline VesperSAINT

  • vpsert
  • Trade Count: (0)
  • Posts: 5588
  • Location: Tampa, Flouda
  • #CustomKorean
    • My Youtube channel with some keyboard videos
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #29 on: Mon, 10 June 2013, 16:19:31 »
That'd be awesome too :) BUTTTTTT Don't do it yet (at least for mine) because I'm going to have to do a detachable cable mod for my Filco first!

Man, I want to get my Filco a pretty cable but I don't know if I can do this detachable cable mod... but that's another discussion :)) Do you by any chance have the parts to make a cable for a Filco???

I don't right now.  I only have USB Mini B and USB A housings right now.

Ah I see I see ~ Not a problem. If you ever do though, that'd be great, otherwise I'll let you know as soon as I'm done with my mod or just decide to go with it anyway :)

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #30 on: Tue, 11 June 2013, 17:01:48 »
I now have a scale, so I can tell you what the cheapest shipping method will be.  The cables themselves range in the 1-1.2oz range for the 3-4' cables.

Offline Jocelyn

  • Trade Count: (0)
  • Posts: 1608
  • Location: Orlando, FL
  • 조셀린
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #31 on: Wed, 12 June 2013, 18:28:37 »
Buy these cables!! They are beautiful :)

Offline kenmai9

  • Unicornforce
  • * Exquisite Elder
  • Trade Count: (0)
  • Posts: 2156
  • Location: Orange County, CA
  • Skrrr
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #32 on: Wed, 12 June 2013, 18:33:05 »
PMed!
« Last Edit: Wed, 12 June 2013, 18:35:45 by kenmai9 »

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #33 on: Wed, 12 June 2013, 20:31:17 »
PMed!

Responded.  Two cables pending and figuring something out with you.

Offline manirelli

  • Trade Count: (0)
  • Posts: 7
  • Location: United States
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #34 on: Fri, 14 June 2013, 19:45:16 »
These cables are absolutely fantastic.  Make sure you get the heatshrinked connectors.  They look far better than stock.

Thanks Nubbi!

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #35 on: Fri, 14 June 2013, 19:53:40 »
These cables are absolutely fantastic.  Make sure you get the heatshrinked connectors.  They look far better than stock.

Thanks Nubbi!

Thanks.  And since they're not in the OP, here are the cables I made for manirelli.

Blue 6' cable:




White 6' cable:


Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #36 on: Mon, 17 June 2013, 16:56:25 »
Shipped the rainbow today and the purple is pending as is a 6' yellow cable.

Offline Input Nirvana

  • Master of the Calculated Risk
  • Trade Count: (0)
  • Posts: 2316
  • Location: Somewhere in the San Francisco Bay area/Best Coast
  • If I tell ya, I'll hafta kill ya
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #37 on: Mon, 17 June 2013, 23:56:13 »
Do you have a cable that is black with a little red for accent, like about 5% red? My Kinesis is black with 4 (I need 4 more red home row keys) It's bold. A black cable with red accents might just be perfect. Or a red with black (60% red 40% black)?


Kinesis Advantage cut into 2 halves | RollerMouse Free 2 | Apple Magic Trackpad | Colemak
Evil Screaming Flying Door Monkeys From Hell                     Proudly GeekWhacking since 2009
Things change, things stay the same                                        Thanks much, Smallfry  
I AM THE REAPER . . . BECAUSE I KILL IT
~retired from forum activities 2015~

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #38 on: Tue, 18 June 2013, 00:50:58 »
Do you have a cable that is black with a little red for accent, like about 5% red? My Kinesis is black with 4 (I need 4 more red home row keys) It's bold. A black cable with red accents might just be perfect. Or a red with black (60% red 40% black)?


(Attachment Link)

I don't have any, but I have been looking at some sleeving off of Taobao that matches what you want.  I'd have to charge a little more for it due to agent fees and shipping and the lead time will be a couple of weeks, but the quality should be pretty decent to good.

Here's the sleeving I'm referencing:



I could also get some paracord that matches, but I do run the risk of the paracord being too small.  Paracord seems to be rather fickle in sizing. 

If either of those sounds good to you, let me know and I'll get something going.

Offline Input Nirvana

  • Master of the Calculated Risk
  • Trade Count: (0)
  • Posts: 2316
  • Location: Somewhere in the San Francisco Bay area/Best Coast
  • If I tell ya, I'll hafta kill ya
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #39 on: Tue, 18 June 2013, 01:07:18 »
Looks almost exactly like what I was envisioning. Now that I know you can get it, I can breathe easy as I know you'll make my dreams come true.

I'll be in touch you cable-maniac.
Kinesis Advantage cut into 2 halves | RollerMouse Free 2 | Apple Magic Trackpad | Colemak
Evil Screaming Flying Door Monkeys From Hell                     Proudly GeekWhacking since 2009
Things change, things stay the same                                        Thanks much, Smallfry  
I AM THE REAPER . . . BECAUSE I KILL IT
~retired from forum activities 2015~

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: [WTS/WTT] nubbinator's sleeved USB cables & water cooling reservoir
« Reply #40 on: Tue, 18 June 2013, 18:33:27 »
Looks almost exactly like what I was envisioning. Now that I know you can get it, I can breathe easy as I know you'll make my dreams come true.

I'll be in touch you cable-maniac.

Looking forward to it.  In the meantime, it looks like I should start trying to find another Taobao agent and should search the depths of Taobao for anything else I might need.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Added some DIY USB cable kits that BadWrench and I had been talking about.

Offline kenmai9

  • Unicornforce
  • * Exquisite Elder
  • Trade Count: (0)
  • Posts: 2156
  • Location: Orange County, CA
  • Skrrr
hey I got my cable! Its so nice. The quality is awesome! Don't let worries of quality get in the way of buying them.

Here it is attached to my board:
25875-0
« Last Edit: Wed, 19 June 2013, 20:26:29 by kenmai9 »

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
hey I got my cable! Its so nice. The quality is awesome! Don't let worries of quality get in the way of buying them.

Here it is attached to my board:
(Attachment Link)

Glad it made it to you quickly and even happier that you love the quality of it.  I do try to make them look nice and be durable.  I refuse to sell anything I myself wouldn't use or be happy with.

Offline thrashwolf

  • Trade Count: (0)
  • Posts: 20
  • Location: Melbourne
  • Freelance Illustrator / Designer
    • My Work
hrmm, are you willing to do a trade of services? :P i'm an illustrator / designer. would be able to do whatever, portrait, birthday gift for a friend. etc etc.
i'd just be looking for one or two cables ;)

L
Novatouch TKL /w MT3 /DEV/TTY keycaps
Filco & Ducky TKL with browns

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
hrmm, are you willing to do a trade of services? :P i'm an illustrator / designer. would be able to do whatever, portrait, birthday gift for a friend. etc etc.
i'd just be looking for one or two cables ;)

L

I don't really have any need for any illustration services.

Offline thrashwolf

  • Trade Count: (0)
  • Posts: 20
  • Location: Melbourne
  • Freelance Illustrator / Designer
    • My Work
guess ill just have to throw some cash your way to get it done then!

will enquire once i can get said cash together

thanks anyways
L
Novatouch TKL /w MT3 /DEV/TTY keycaps
Filco & Ducky TKL with browns

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Trade Count: (0)
  • Thread Starter
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
guess ill just have to throw some cash your way to get it done then!

will enquire once i can get said cash together

thanks anyways
L

Sorry, I really wish there was something I needed right now, but there isn't.  I might hit you up down the road if I want some artwork for laser engraving or custom printed key caps, but right now the only thing artistic I really need is someone who can carve wax well so I can get some more interesting molds made up for my attempts at home made key caps.

Offline thrashwolf

  • Trade Count: (0)
  • Posts: 20
  • Location: Melbourne
  • Freelance Illustrator / Designer
    • My Work
would definately be excited to work with you on future stuff. custom keycaps excite me. haha!

Novatouch TKL /w MT3 /DEV/TTY keycaps
Filco & Ducky TKL with browns

Offline tgujay

  • Trade Count: (0)
  • Posts: 316
  • Location: Kalamazoo
What exactly is a red with clear springs?  Or do they just have the springs as you swapped for your ergo clears?
Gotta collect them all