Tigersharkdude's Wooden Wrist Rests
OPEN FOR BUSINESS
What is for sale? Made to order wooden wrist rests in a few different models, in your choice of material and finish (pending that I have it or can find it locally).
Finish
Stains that I currently have (list will be updated as new stains arrive)
· Rustoleum Ebony
· Rustoleum Weathered Grey
· Minwax English Chestnut
· Minwax Ipswich Pine
· Custom Green Mix from Porter Paint
· If you would like something that I do not have, please PM me or ask here prior to ordering and I will see if I can find it locally
All wrist rests will be coated with numerous coats (3+) of Rustoleum Gloss Polyurethane, if you would like matte urethane please PM or ask here and I will source that locally. If you do not tell me which poly finish you want, it will be done in GLOSS.
All GLOSS wrist rests will be wetsanded, polished and buffed to a glossy shine before being sent out. If you order a matte wrist rest I will or will not (your choice) wetsand your piece.
Models
I currently offer 3 models of wrist rests
· Option 1: 3/4" Solid pine or whitewood keyboard plate (bottom plate) and 3/4" solid pine or whitewood wrist wrest (top plate) - Price: $50 + shipping
· Option 2: 1/2" pressed birch keyboard plate (bottom plate) and 3/4" solid pine or whitewood wrist wrest (top plate - Price $40 + shipping
· Option 3: No keyboard plate (bottom plate) and only the 3/4" top plate. Available in; pine, whitewood, or cedar(+$5) wrist wrest - Price: $20 + shipping
· Update 8/5/15 - I have found cedar locally, but can only make Option 3 pieces because the boards are narrow (only up to 4" wide).
· If you would like something that is not listed here please PM me or ask here prior to ordering and I'll try to source what you are looking for locally
Payment
All payments must be by paypal, I will also entertain trades, PM me offers.
All orders must be paid in full upon order placement.
General Information
All wrist rests will be gone over thoroughly and will not leave my shop if they do not pass my standards. Do note that this is small handcrafted wood product and may have minimal defects that are beyond my control.
I will keep all buyers up to date with pictures of the "build" via email or text message.
All items sold as is. Lost or stolen packages are buyers responsibility.
How to order?
To place an order you will need to show interest in this thread and then PM me and we will work out the details
Shipping
CONUS - Price depends on Option # and overall size (should be no more than $15 (<<think Option 1 and full size keyboard)
International – If international please send me a PM prior to ordering with informatin as to which model wrist rest you would like and your address and I will get a shipping quote.
All items will be carefully packed to insure no damage occurs during shipping
Giveaway
After every 10 orders from Geekhackers I will giveaway a free simple wooden wrist rest (option 3).
WINNERS
Pics of work already completed
· Solid pine (option 1) - Quickfire Rapid - English Chestnut
ALBUM - http://imgur.com/a/lrxia
(http://i.imgur.com/uL5XAue.jpg)
· Pressed Pine base, solid pine top (option 2) - Quickfire Storm TK - Custom Green
ALBUM - http://imgur.com/a/fR2cJ
(http://i.imgur.com/IviIbUc.jpg)
· Solid Pine (option 1) - Quickfire Rapid - Weathered Grey
ALBUM - http://imgur.com/a/0TfGj
(http://i.imgur.com/81WnL3t.jpg)
Soild Whitewood (option 1) - Duckyshine 3 - Ebony stain
Album - http://imgur.com/a/rxh5n
(http://i.imgur.com/6VByqt7.jpg)
· Pressed Pine base, solid pine top (option 2) - PokerII - English Chestnut
ALBUM - http://imgur.com/a/e5nnJ
(http://i.imgur.com/tbxLDkS.jpg)
· Pressed Pine base, solid whitewood top (option 2) - Leopold 660C - Ebony
ALBUM - http://imgur.com/a/T8R0e
(http://i.imgur.com/KJGXYMo.jpg)
· Simple whitewood (option 3) - TKL - Ebony
ALBUM - http://imgur.com/a/8AxBb
(http://i.imgur.com/YQOJPMp.jpg)
Simple whitewood (option 3) - TKL - No Stain
ALBUM - http://imgur.com/a/jR7t6
(http://i.imgur.com/XKDXzh2.jpg)
Pressed Birch base, solid whitewood top (option 2) - Rosewill RK9000 TK
ALBUM -
(http://i.imgur.com/l2taQh4.jpg)
Solid whitewood, English Chestnut stain with an Aged/Worn finish (option 3) - Tenkey/Fullsize (Sample pic with MY keyboard of incorrect size)
ALBUM - http://imgur.com/a/LaYs0
(http://i.imgur.com/OGn37Cc.jpg)
Solid Whitewood, no stain (option 1) - HHKB Pro2
ALBUM - http://imgur.com/a/0g5BZ
(http://i.imgur.com/mb13N9M.jpg)
Solid Whitewood, Ipswich Pine Stain (Option 3) - Quickfire Rapid
ALBUM - http://imgur.com/a/uxqBF
(http://i.imgur.com/zFRDTA5.jpg)
TKL - Cedar - No stain/poly
ALBUM - http://imgur.com/a/pPxFM
(http://i.imgur.com/T0xzOB0.jpg)
Planck - Pine - Weathered Grey & Ipswich Pine
ALBUM - http://imgur.com/a/9t65z
(http://i.imgur.com/2H1g3sT.jpg)
QFR - Custom painted - Option 1 style
ALBUM - http://imgur.com/a/WyKSt
(http://i.imgur.com/4GVoalG.jpg)
Monitor Stand V1
ALBUM - http://imgur.com/a/sN4nI
(http://i.imgur.com/xjz0ZZK.jpg)
Monitor Stand V2
ALBUM - http://imgur.com/a/AoWhu
vvv UNPAINTED vvv
(http://i.imgur.com/pApAzvN.jpg)
Can you dye and fade it? I have always liked the finish on Gibson guitars:
Example A (http://www2.gibson.com/Images/Products/Electric-Guitars/Les-Paul/Gibson-USA/2012-Les-Paul-Standard/LPNSTDPDBCH1-Finish-Shot-jpg.aspx?KeepThis=true&TB_iframe=true&height=410&width=1000)
Example B (http://www2.gibson.com/Images/Products/Electric-Guitars/Les-Paul/Gibson-USA/2012-Les-Paul-Standard/LPNSTDPHSCH1-Finish-Shot-jpg.aspx?KeepThis=true&TB_iframe=true&height=410&width=1000)
Example C (http://www2.gibson.com/Images/Products/Electric-Guitars/Les-Paul/Gibson-USA/2012-Les-Paul-Standard/LPNSTDPFBCH1-Finish-Shot-jpg.aspx?KeepThis=true&TB_iframe=true&height=410&width=1000)
I would like a wrist rest which fades to black at the edge closest to the keyboard, which in my case are usually black. Below are some images from when I played around with the idea a few months back.
Show Image
(http://i.imgur.com/jri6yn1.png)
Show Image
(http://i.imgur.com/EUU2fXa.jpg)
Show Image
(http://i.imgur.com/mYlL5nu.png)
Show Image
(http://i.imgur.com/bI602OA.png)
Ive never done a stain job like that before. Let me see if I can figure out how to do it online
Update on the orders for Photoelectric and Stiggeh
Photoelectric's simple TKL wrist rest with no stain is finished. This one was quite the undertaking, we tried numerous different methods of application for the weathered grey stain and it was always too dark for her, she ended up deciding on a bare wood finish with only poly on top. So I sanded all of the grey off and applied 10+ coats of polyurethane and wetsanded / polished .... its as slick as a freshly waxed car now ..... LOL
(http://i.imgur.com/59y5YmG.jpg)
(http://i.imgur.com/5Onwk9D.jpg)
(http://i.imgur.com/oyppd54.jpg)
(http://i.imgur.com/XKDXzh2.jpg)
(http://i.imgur.com/LPqamBC.jpg)
(http://i.imgur.com/3aAz4e7.jpg)
Here is the (option 2) DuckyShineIII - ebony stained - wrist/keyboard rest for Stiggeh .... still a work in progress
(http://i.imgur.com/lc0hhpl.jpg)
(http://i.imgur.com/1P703RT.jpg)
(http://i.imgur.com/PvtGYiE.jpg)
(http://i.imgur.com/KPQb5h8.jpg)
Show Image
(http://i.imgur.com/59y5YmG.jpg)
Show Image
(http://i.imgur.com/5Onwk9D.jpg)
Show Image
(http://i.imgur.com/oyppd54.jpg)
Show Image
(http://i.imgur.com/XKDXzh2.jpg)
Show Image
(http://i.imgur.com/LPqamBC.jpg)
Show Image
(http://i.imgur.com/3aAz4e7.jpg)
Looks great--thank you! Will match well with my desk and an oiled birch monitor shelf I made for it. Will post photos when it arrives!
Making Photoelectric a new piece, I cut it an inch too short by accident -____________-
Show Image
(http://i.imgur.com/RGOn9t7.jpg)
Well now you can try out the RIT and not feel so bad!
Making Photoelectric a new piece, I cut it an inch too short by accident -____________-
Show Image
(http://i.imgur.com/RGOn9t7.jpg)
I'm not sure this is the best picture to be talking about cutting it an inch too short.. LOL
I want to get one of your TKL wrist rests eventually.. you have a wait list?
Have you considered trying to make something like this?
Show Image
(http://www.woodworkman.com/data/geditor/1101/%ED%8C%9C%EB%A0%88%EC%8A%A4%ED%8A%B8%EC%9D%BC%EC%B2%B4%ED%98%95(%ED%95%B4%ED%94%BC%ED%95%B4%ED%82%B9)09.jpg)
Hory shet that is boss. I have never seen anything like it, however id give it a shot if someone were interested ; )
EDIT: Im totally going to attempt to make a monitor stand for my wrist rest now
I can vouch for him, lots of updates and photos via email / PM. He's very involved and a great communicator.
Here's two more snapshots I got of poly coating in progress.
Show Image
(http://imgur.com/kY2bHyR.jpg)
Show Image
(http://imgur.com/4qNZ2lX.jpg)
Thanks dude, this is probably my favorite piece to date .... its quite unique, which is something I love
Im doing it right meow .... lol
You are!?
Well you have a single monitor setup, I bet you could use it yourself.
I'm looking forward to seeing the process if you're doing it, good luck :thumb:
I am I am. Making it to see if I can do it, and for myself :p
This piece won't be perfect, first builds never are
Show Image
(http://i.imgur.com/2UVMq3A.jpg)
Damn you're fast, sweet jesus.
I can vouch for him, lots of updates and photos via email / PM. He's very involved and a great communicator.
Here's two more snapshots I got of poly coating in progress.
Show Image
(http://imgur.com/kY2bHyR.jpg)
Show Image
(http://imgur.com/4qNZ2lX.jpg)
Oh, I wasn't worried... I just lurk around the forums over 12 hrs most days and like having pretty pictures to look at ;)
Im doing it right meow .... lol
You are!?
Well you have a single monitor setup, I bet you could use it yourself.
I'm looking forward to seeing the process if you're doing it, good luck :thumb:
I am I am. Making it to see if I can do it, and for myself :p
This piece won't be perfect, first builds never are
Show Image
(http://i.imgur.com/2UVMq3A.jpg)
Since this piece is made of scrap wood, it's a little bit shorter than my QFR wrist rest, its perfect for a PokerII/60% setup ...... if anybody would be interested in it let me know. After it is complete I'll test it with my monitor for a few days to make sure it is stable
PizzaCola your piece is finished! (don't let the pics fool you, its GLOSSY)
Show Image
(http://i.imgur.com/hTSS8Ap.jpg)
Show Image
(http://i.imgur.com/tYj4dbq.jpg)
I can't say how impressed I am. Can't wait to get ahold of it.
this is the first monitor stand I made that was too short due to not having a long enough piece for the top plate
Show Image
(http://i.imgur.com/xjz0ZZK.jpg)
Looks great, now you just need a Happy Hacking to put under it ;)
New monitor stand is curing, ill let this sit in the clamps for 3-4 days before I start working on it (excuse the grain going in the wrong direction, this piece will be painted to match my wrist rest)
Show Image
(http://i.imgur.com/GERPDCe.jpg)
added another coat of stain for Cmadrid
Show Image
(http://i.imgur.com/vVYgiII.jpg)
Looks great!
It's alive!
Show Image
(http://i.imgur.com/wFLPi1E.jpg)
Show Image
(http://i.imgur.com/EmHJOCg.jpg)
Show Image
(http://i.imgur.com/wHdEBpr.jpg)
(http://geekhack.org/Smileys/solosmileys/shocked.gif) that look's really neat, great job mate
Stain is on Bueller's piece
Show Image
(http://i.imgur.com/r5Fe8CB.jpg)
Nice choice, I'm sure he'll be happy about receiving this.
Painted the monitor stand black yesterday, it's going to be a few weeks before we go to see my uncle :(
Show Image
(http://i.imgur.com/J8gztfX.jpg)
That stand is just getting sexier and sexier.
Show Image
(http://i.imgur.com/O2dVeJo.jpg)
Just came in!
If the weather stops being terrible I can finish painting my replacement top case for my QFR >_>
WOOT WOOT!
Getting Started on the NEW piece for Bueller
(http://i.imgur.com/lFidSUC.jpg)
sanded and ready for stain
(http://i.imgur.com/jA4lkIW.jpg)
Painted the monitor stand black yesterday, it's going to be a few weeks before we go to see my uncle :(
Show Image
(http://i.imgur.com/J8gztfX.jpg)
Hi tigersharkdude,
Will you start selling those monitor stands? and if so, will you make so full sized keyboard will fit?
Recently I made a wrist rest for JDCarpe (seen below) and I surprised him by making a monitor stand as well and sending him a combo set (pics below), sadly USPS damaged the box and broke one "leg" off of the monitor stand (JDCarpe is currently trying to fix it). Here are some of MY pics before I sent it out
Wrist Rest gloss
Show Image
(http://i.imgur.com/XnNVOIn.jpg)
Monitor Stand gloss
Show Image
(http://i.imgur.com/WkuQj0W.jpg)
Together
Show Image
(http://i.imgur.com/3EDPIP1.jpg)
Show Image
(http://i.imgur.com/GQmmc9P.jpg)
As mentioned in previous messages, I am currently experimenting with wooden dowels to see if that will make the piece even sturdier (I had NO issues with just glue, but evidently USPS likes to play football with packages)
I really think those Combo sets looks stunning! Perfect for me who using my desk a lot and want to have more space when not using the keyboard! :)
Made it to my uncles today.
And heres a teaser of our shenanigans
Show Image
(http://i.imgur.com/o0dcRVe.jpg)
wow, just wow! That's impressive!
Somewhat of an update, I have my saw working again so Im going to attempt to make myself something to make sure all is good before I OPEN this thread back up for orders
I'll post these pics, see if you can figure out what Im making without looking at the EXIF data
Show Image
(http://i.imgur.com/W2cyoNG.jpg)
Show Image
(http://i.imgur.com/uTm2XU7.jpg)
Easy. It's a cap box. Either of the shadow variety or other. I've been looking at making one for myself, but with a slightly different take on it.
Update to the current work log
Plank pieces
Finished sanding earlier and applied stain
Show Image
(http://i.imgur.com/2H1g3sT.jpg)
Hwood's raw cedar piece
Overall sanding is finished, I still have some light sanding to do before sending it out
Show Image
(http://i.imgur.com/T0xzOB0.jpg)
Yay! I can't wait for my order. Looking great.
Update on Cebu's piece. It's for a Varmillo TKL, the stain is a mixture of English Chestnut and Ebony.
Do note that it's not finished, I still need to wetsand it smooth (the new poly is like water -___- and it runs like crazy ... I am not a fan of it at all)
Show Image
(http://i.imgur.com/vvJyOfL.jpg)
ye old wrist rest is finished
(http://i.imgur.com/nIYWvgd.jpg)