Author Topic: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed  (Read 1174001 times)

0 Members and 1 Guest are viewing this topic.

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [GB] TGR-Jane v2 CE
« Reply #900 on: Wed, 03 July 2019, 10:03:40 »
TGR is besTGR.

Offline Oblotzky

  • Posts: 2049
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [GB] TGR-Jane v2 CE
« Reply #901 on: Wed, 03 July 2019, 10:39:19 »
TGR is besTGR.

You can't write AltGr without TGR

Offline pr0ximity

  • Posts: 2705
  • Location: Maine
Re: [GB] TGR-Jane v2 CE
« Reply #902 on: Wed, 03 July 2019, 13:46:02 »
100-160 days after group buy ends = between August 5, 2019 and October 4, 2019

Can't wait till we get some progress photos!  :thumb:

yuktsi posted a photo on Instagram of the cases being machined. I didn't save it but I'm sure someone did.
| Flickr | KMAC 1.2 | Koala | GSKT-00-Z | GSKT-00-AEK | GON NerD60 | Jane V2 CE | Whale | J80S | Ibis | Pro2 | Pro1 | 356mini | 356CL DGE | G80-5000 HAMDE | IBM 1390120 | IBM F AT | IBM F122 | IBM 3101 | Zenith Z-150

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 719
  • Location: US
Re: [GB] TGR-Jane v2 CE
« Reply #903 on: Wed, 03 July 2019, 13:49:46 »
100-160 days after group buy ends = between August 5, 2019 and October 4, 2019

Can't wait till we get some progress photos!  :thumb:

yuktsi posted a photo on Instagram of the cases being machined. I didn't save it but I'm sure someone did.

previous page i posted it :v
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline pr0ximity

  • Posts: 2705
  • Location: Maine
Re: [GB] TGR-Jane v2 CE
« Reply #904 on: Wed, 03 July 2019, 15:12:37 »
100-160 days after group buy ends = between August 5, 2019 and October 4, 2019

Can't wait till we get some progress photos!  :thumb:

yuktsi posted a photo on Instagram of the cases being machined. I didn't save it but I'm sure someone did.

previous page i posted it :v
Ah, well done
| Flickr | KMAC 1.2 | Koala | GSKT-00-Z | GSKT-00-AEK | GON NerD60 | Jane V2 CE | Whale | J80S | Ibis | Pro2 | Pro1 | 356mini | 356CL DGE | G80-5000 HAMDE | IBM 1390120 | IBM F AT | IBM F122 | IBM 3101 | Zenith Z-150

Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1176
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB] TGR-Jane v2 CE
« Reply #905 on: Thu, 11 July 2019, 01:37:11 »
Hi guys, here are the PCB layout and plate files for the v2 CE.





email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline gabetjh

  • Posts: 55
  • Location: Singapore
Re: [GB] TGR-Jane v2 CE
« Reply #906 on: Thu, 11 July 2019, 01:39:55 »
Hi guys, here are the PCB layout and plate files for the v2 CE.
wew


Sent from my iPhone using Tapatalk

Offline jariss

  • Posts: 30
Re: [GB] TGR-Jane v2 CE
« Reply #907 on: Thu, 11 July 2019, 01:40:41 »
Hi guys, here are the PCB layout and plate files for the v2 CE.

Thank you!

Offline Zacharius

  • Posts: 168
  • Location: ATX
Re: [GB] TGR-Jane v2 CE
« Reply #908 on: Thu, 11 July 2019, 10:25:31 »
Hi guys, here are the PCB layout and plate files for the v2 CE.


Absolute legend. Thanks!





Offline hineybush

  • * Maker
  • Posts: 1648
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] TGR-Jane v2 CE
« Reply #909 on: Thu, 11 July 2019, 10:45:35 »
Hi guys, here are the PCB layout and plate files for the v2 CE.


Offline bengine

  • Posts: 87
Re: [GB] TGR-Jane v2 CE
« Reply #910 on: Thu, 11 July 2019, 18:45:55 »
Hi guys, here are the PCB layout and plate files for the v2 CE.

Show Image


When?


Offline hineybush

  • * Maker
  • Posts: 1648
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] TGR-Jane v2 CE
« Reply #911 on: Thu, 11 July 2019, 19:04:44 »
Hi guys, here are the PCB layout and plate files for the v2 CE.

Show Image


When?

Show Image


gimme a few weeks to organize


Sent from my iPhone using Tapatalk

Offline sarsaparillagorilla

  • Posts: 12
  • Location: Brighton
Re: [GB] TGR-Jane v2 CE
« Reply #912 on: Fri, 12 July 2019, 07:16:13 »
Hey I was wondering if this GB is still open for purchase?

Offline Oblotzky

  • Posts: 2049
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [GB] TGR-Jane v2 CE
« Reply #913 on: Fri, 12 July 2019, 07:38:55 »
Hey I was wondering if this GB is still open for purchase?

It's closed

Offline msvming

  • Posts: 17
Re: [GB] TGR-Jane v2 CE
« Reply #914 on: Sun, 14 July 2019, 10:56:35 »
Hey I was wondering if this GB is still open for purchase?

It's closed

In 2 Second

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Jane v2 CE
« Reply #915 on: Sun, 14 July 2019, 11:44:28 »
Hey I was wondering if this GB is still open for purchase?

lol
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline EMC Labs

  • Posts: 447
Re: [GB] TGR-Jane v2 CE
« Reply #916 on: Sun, 14 July 2019, 22:24:51 »
Hey I was wondering if this GB is still open for purchase?

feels bad

Offline TastyChance

  • Posts: 40
  • Location: AZ
Re: [GB] TGR-Jane v2 CE
« Reply #917 on: Sun, 14 July 2019, 22:45:49 »
He's confused because this old GB is still getting bumped multiple times a day by quality posts such as "lol".

Offline Midori

  • Formerly loktrevor
  • Posts: 98
  • Location: Los Angeles, CA
  • c:
Re: [GB] TGR-Jane v2 CE
« Reply #918 on: Mon, 15 July 2019, 03:21:17 »
He's confused because this old GB is still getting bumped multiple times a day by quality posts such as "lol".
nice
      

TGR Jane v2 | Vulcan Pro | Matrix 8X v2.0 | Bean | hbcp | froge | hype hen

Offline fuzzybaffy

  • Posts: 553
Re: [GB] TGR-Jane v2 CE
« Reply #919 on: Mon, 15 July 2019, 03:52:06 »
Sorry for the noob question, but for basically all these custom keyboard GBs, they're DIY, right?

Offline rainb1ood

  • Posts: 560
  • so pretty so plastic
Re: [GB] TGR-Jane v2 CE
« Reply #920 on: Mon, 15 July 2019, 04:02:59 »
Sorry for the noob question, but for basically all these custom keyboard GBs, they're DIY, right?

Yes you'll have to source your own switches and build them yourself or have someone build/assemble it

Offline Acereconkeys

  • Posts: 498
  • Location: West Coast US of A
  • Happiness = life - expectations
Re: [GB] TGR-Jane v2 CE
« Reply #921 on: Mon, 15 July 2019, 11:36:43 »
He's confused because this old GB is still getting bumped multiple times a day by quality posts such as "lol".

Gottem
TMO50 | Jane V2 CE Incoming | Realforce 87u 55g | Aergo

Aergo design and build log: https://geekhack.org/index.php?topic=103681.msg2840918#msg2840918

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [GB] TGR-Jane v2 CE
« Reply #922 on: Mon, 15 July 2019, 12:22:01 »
He's confused because this old GB is still getting bumped multiple times a day by quality posts such as "lol".


lol

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Jane v2 CE
« Reply #923 on: Mon, 15 July 2019, 23:02:01 »
Sorry for the noob question, but for basically all these custom keyboard GBs, they're DIY, right?

your account is from 2009

but also this **** didn't exist then really so valid
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline gMit

  • Posts: 58
Re: [GB] TGR-Jane v2 CE
« Reply #924 on: Tue, 30 July 2019, 22:18:07 »
Has there been any updates?

Offline gabetjh

  • Posts: 55
  • Location: Singapore
Re: [GB] TGR-Jane v2 CE
« Reply #925 on: Tue, 30 July 2019, 22:26:36 »
Has there been any updates?

read post by OP, lead time 100-160 days


Sent from my iPhone using Tapatalk

Offline packman86

  • Posts: 448
  • Morning Coffee
Re: [GB] TGR-Jane v2 CE
« Reply #926 on: Tue, 30 July 2019, 22:46:07 »
Has there been any updates?

read post by OP, lead time 100-160 days


Sent from my iPhone using Tapatalk

Keyboard Collection:

More

TGR Jane V2 | TGR Jane V2 CE | TGR Alice | TGR Dolice | TGR 910 | TGR x Singa UNIKORN 60 | Matrix 8XV 2.0 Korea Version | Matrix 8XV 2.0add | LZ CLS s h x | Duck Jetfire | TX-CP | QXP | Noxary X65 | RAMA M60-A | Model F62 "Kishsaver"

Offline bengine

  • Posts: 87
Re: [GB] TGR-Jane v2 CE
« Reply #927 on: Tue, 30 July 2019, 23:15:57 »
Has there been any updates?

read post by OP, lead time 100-160 days


Sent from my iPhone using Tapatalk

Show Image


Basically between Aug 9 and Oct 8

Offline hineybush

  • * Maker
  • Posts: 1648
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] TGR-Jane v2 CE
« Reply #928 on: Tue, 30 July 2019, 23:55:59 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

Offline gMit

  • Posts: 58
Re: [GB] TGR-Jane v2 CE
« Reply #929 on: Wed, 31 July 2019, 00:06:25 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

Thx Hiney.

To everyone else, yes I can read the lead time. That wasn't my question however, I wanted to know of any project updates.

Offline gabetjh

  • Posts: 55
  • Location: Singapore
Re: [GB] TGR-Jane v2 CE
« Reply #930 on: Wed, 31 July 2019, 00:06:35 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

wew i’m in


Sent from my iPhone using Tapatalk

Offline gabetjh

  • Posts: 55
  • Location: Singapore
[GB] TGR-Jane v2 CE
« Reply #931 on: Wed, 31 July 2019, 00:08:32 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

Thx Hiney.

To everyone else, yes I can read the lead time. That wasn't my question however, I wanted to know of any project updates.

i guess yuktsi will update accordingly


Sent from my iPhone using Tapatalk

Offline hineybush

  • * Maker
  • Posts: 1648
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] TGR-Jane v2 CE
« Reply #932 on: Wed, 31 July 2019, 00:11:00 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

Thx Hiney.

To everyone else, yes I can read the lead time. That wasn't my question however, I wanted to know of any project updates.


in production dont worry

Offline bengine

  • Posts: 87
[GB] TGR-Jane v2 CE
« Reply #933 on: Wed, 31 July 2019, 00:37:37 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

Thx Hiney.

To everyone else, yes I can read the lead time. That wasn't my question however, I wanted to know of any project updates.

WK version is done with the machining about 3 weeks ago. Should be undergoing ano at the moment.

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: [GB] TGR-Jane v2 CE
« Reply #934 on: Wed, 31 July 2019, 00:47:58 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

Thx Hiney.

To everyone else, yes I can read the lead time. That wasn't my question however, I wanted to know of any project updates.

WK version is done with the machining about 3 weeks ago. Should be undergoing ano at the moment.

what monster ruined their jane by cutting off the blockers?

Offline JerkChicken456

  • Posts: 33
  • Location: New York City
Re: [GB] TGR-Jane v2 CE
« Reply #935 on: Wed, 31 July 2019, 03:44:56 »
New to this hobby.. saw an image on Flickr of a purple jane and fell in love instantly.  Anyone want to give me their GB spot for a fellow newcomer ;)

Offline nguyenhimself

  • Posts: 672
[GB] TGR-Jane v2 CE
« Reply #936 on: Wed, 31 July 2019, 04:35:41 »
New to this hobby.. saw an image on Flickr of a purple jane and fell in love instantly.  Anyone want to give me their GB spot for a fellow newcomer ;)
I guess you don’t know that once these limited babies are shipped, they can be flipped on the aftermarket for like 3x the original price, huh?

Offline tentboy

  • Posts: 173
  • Location: Maryland
Re: [GB] TGR-Jane v2 CE
« Reply #937 on: Wed, 31 July 2019, 06:35:24 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes
How different would you say FR4 feels from CF.  I wanna try new stuff but not don't wanna spend a fortune on different pcb and plate combos

Offline Emir

  • icon mods
  • * Exquisite Elder
  • Posts: 1129
  • Location: Linköping, Sweden
  • Bandit
    • Discord
Re: [GB] TGR-Jane v2 CE
« Reply #938 on: Wed, 31 July 2019, 06:37:11 »
New to this hobby.. saw an image on Flickr of a purple jane and fell in love instantly.  Anyone want to give me their GB spot for a fellow newcomer ;)
I guess you don’t know that once these limited babies are shipped, they can be flipped on the aftermarket for like 3x the original price, huh?

Or 5x the gb price for Jane v2 on mm 😇

Offline MMKB

  • Posts: 483
  • Location: norcal
Re: [GB] TGR-Jane v2 CE
« Reply #939 on: Wed, 31 July 2019, 13:02:31 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

My wallet can wait but you're the man
        

Offline ARSLOCK

  • Posts: 247
  • Location: SC
  • CarolinaMech.com
    • Carolina Mech
Re: [GB] TGR-Jane v2 CE
« Reply #940 on: Wed, 31 July 2019, 13:04:03 »
How different would you say FR4 feels from CF.  I wanna try new stuff but not don't wanna spend a fortune on different pcb and plate combos

fr4 is pcb material basically, i don't have a cf plate myself but i think it would be stiffer than fr4?
« Last Edit: Wed, 31 July 2019, 13:44:51 by ARSLOCK »

Offline rkarp

  • Posts: 125
  • Location: Minneapolis, MN
    • hypertext.dev
Re: [GB] TGR-Jane v2 CE
« Reply #941 on: Wed, 31 July 2019, 14:15:27 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

Thx Hiney.

To everyone else, yes I can read the lead time. That wasn't my question however, I wanted to know of any project updates.

WK version is done with the machining about 3 weeks ago. Should be undergoing ano at the moment.

what monster ruined their jane by cutting off the blockers?

I did.  I do like the symmetry of the blockers, but I find utility in the extra keys.  I’m going to do a split RSHIFT too.

Offline Oblotzky

  • Posts: 2049
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [GB] TGR-Jane v2 CE
« Reply #942 on: Wed, 31 July 2019, 14:25:42 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

Thx Hiney.

To everyone else, yes I can read the lead time. That wasn't my question however, I wanted to know of any project updates.

WK version is done with the machining about 3 weeks ago. Should be undergoing ano at the moment.

what monster ruined their jane by cutting off the blockers?

I did.  I do like the symmetry of the blockers, but I find utility in the extra keys.  I’m going to do a split RSHIFT too.





Winkey + Split Right Shift represent!

Offline rkarp

  • Posts: 125
  • Location: Minneapolis, MN
    • hypertext.dev
Re: [GB] TGR-Jane v2 CE
« Reply #943 on: Wed, 31 July 2019, 14:41:52 »
2-3 weeks i plan to run a thin h88ce PCB and FR4 full/half plates

will update here when the time comes

Thx Hiney.

To everyone else, yes I can read the lead time. That wasn't my question however, I wanted to know of any project updates.

WK version is done with the machining about 3 weeks ago. Should be undergoing ano at the moment.

what monster ruined their jane by cutting off the blockers?

I did.  I do like the symmetry of the blockers, but I find utility in the extra keys.  I’m going to do a split RSHIFT too.

Show Image


Show Image


Winkey + Split Right Shift represent!


Offline ramnes

  • Posts: 864
  • Location: France
  • T fou, mec?
Re: [GB] TGR-Jane v2 CE
« Reply #944 on: Wed, 31 July 2019, 17:02:29 »
pls no
23h18 - photekq: hhkb with silenced realforce sliders and lubricated well is
23h18 - photekq: the best switch i've used

Offline JerkChicken456

  • Posts: 33
  • Location: New York City
Re: [GB] TGR-Jane v2 CE
« Reply #945 on: Wed, 31 July 2019, 17:32:03 »
For those wkl boards.. what do you use as your hotkey for windows button?

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] TGR-Jane v2 CE
« Reply #946 on: Wed, 31 July 2019, 17:34:02 »
For those wkl boards.. what do you use as your hotkey for windows button?

Right Alt is popular

Offline clasicks

  • Formerly KeyboardUser4
  • Posts: 785
Re: [GB] TGR-Jane v2 CE
« Reply #947 on: Wed, 31 July 2019, 17:54:40 »
For those wkl boards.. what do you use as your hotkey for windows button?

Right Alt is popular

dis wat i do

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] TGR-Jane v2 CE
« Reply #948 on: Wed, 31 July 2019, 18:40:03 »
For those wkl boards.. what do you use as your hotkey for windows button?
Lower left key. Or left control


Offline pr0ximity

  • Posts: 2705
  • Location: Maine
Re: [GB] TGR-Jane v2 CE
« Reply #949 on: Wed, 31 July 2019, 19:35:37 »
For those wkl boards.. what do you use as your hotkey for windows button?

Move Ctrl to the Caps Lock spot then you can put Win/Alt on the keys next to the blockers.
| Flickr | KMAC 1.2 | Koala | GSKT-00-Z | GSKT-00-AEK | GON NerD60 | Jane V2 CE | Whale | J80S | Ibis | Pro2 | Pro1 | 356mini | 356CL DGE | G80-5000 HAMDE | IBM 1390120 | IBM F AT | IBM F122 | IBM 3101 | Zenith Z-150