Author Topic: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed  (Read 1096210 times)

0 Members and 1 Guest are viewing this topic.

Offline nostr

  • Posts: 45
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2550 on: Mon, 15 August 2022, 06:36:34 »
Anyone know where I can get a via enabled hex file for the pcb

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12227
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2551 on: Mon, 15 August 2022, 08:24:20 »
Anyone know where I can get a via enabled hex file for the pcb

you might be better off just buying an h88
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | little z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geonworks Frog | Hiney TKL One



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline koenoe

  • Posts: 120
    • My YouTube channel
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2552 on: Mon, 15 August 2022, 09:27:53 »
Anyone know where I can get a via enabled hex file for the pcb

I've flashed mine with V2 via hex and everything works fine except F13.

Offline luumii

  • Posts: 56
  • A day in life without Keyboard SA
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2553 on: Thu, 08 September 2022, 10:16:38 »
Hi all,

Has everyone already recieved their board? Or is there a true last batch last batch gang?

Offline SeedyOne

  • Posts: 474
  • Location: Los Angeles
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2554 on: Thu, 08 September 2022, 11:11:38 »
Hi all,

Has everyone already recieved their board? Or is there a true last batch last batch gang?

Good question, if they are all truly out we can finally update the title. I suspect, however, without an update from the man himself that at least a few are still likely out.

Offline Chodaniel

  • Posts: 6
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2555 on: Thu, 08 September 2022, 21:03:39 »
Ive been looking through this thread living vicariously through those who were in on the board... T_T

Offline Rumblehotep

  • Posts: 470
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2556 on: Fri, 09 September 2022, 00:01:09 »
Hi all,

Has everyone already recieved their board? Or is there a true last batch last batch gang?
No

Offline luumii

  • Posts: 56
  • A day in life without Keyboard SA
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2557 on: Sat, 10 September 2022, 07:39:47 »
Hi all,

Has everyone already recieved their board? Or is there a true last batch last batch gang?
No

Still waiting on yours as well? Mine too!

Offline ic33hot

  • Posts: 7
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2558 on: Wed, 21 September 2022, 11:43:39 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))

Offline clik_clak

  • Posts: 419
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2559 on: Wed, 21 September 2022, 11:57:19 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))

The best thing about it is the new boards are in stock. So they decided to produce some in stock units for a vendor when there's people that haven't even gotten their GB from 3 years ago.

Amazing move!

Offline Rumblehotep

  • Posts: 470
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2560 on: Tue, 27 September 2022, 22:38:05 »
Just arrived today.
Now to methodically second guess all the build plans and ideas I ruminated over for the last few years.
Gotta do this right.

Thank you Yuktsi!  :)

Offline CHAOSERA

  • Posts: 38
    • official website of chaosera
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2561 on: Tue, 27 September 2022, 23:44:38 »
This is really cool!

Offline shansoft

  • Posts: 111
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2562 on: Fri, 18 November 2022, 21:35:56 »
Does the toblerone weight suppose to fit and cover up the screw holes?

My toblerone weight have the side fitting properly, but towards middle starting to have gap no matter what I do. The middle part is somehow shorter as well when I measure it, which ends up showing one of the screw hole after it's all done.
Collections: Mysterium TKL / leaf80 Blue Alps / Tiamo V2 / Tiamo V3 / Drop CTRL Canvas / KBD19x / Equalz Zer0.9 PC / Percent Volt80 / Satisfaction 75 / Kira 80 / Rama U80 / Keycult No1Rev1 / Keycult No2Rev1 / E8.5 / Mode 80 FE / J02 LE / Equalz Zer0.9 EE / Kepler TKL / Gemini TKL / Time80Re / Jane V2 / Jane V2 CE / Mr Suit / KFE CE

Offline jimboytacos

  • Posts: 232
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2563 on: Tue, 22 November 2022, 00:31:59 »
Why does your weight look more recessed into the body? looks baa.d

Offline -_-

  • Posts: 8
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2564 on: Thu, 24 November 2022, 19:19:38 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))
ME fake jane ;D
TGR Jane v2 CE | Dolphin v3 | Bias R2 | KFE | HHKB Pro 1

Offline lys.nordique

  • Formerly 'scatology'
  • Posts: 103
  • Location: Québec
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2565 on: Fri, 25 November 2022, 04:20:48 »
TGR-BENT

Offline NightFox99

  • Posts: 93
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2566 on: Fri, 25 November 2022, 07:09:16 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))
ME fake jane ;D

Oh really ? Waiting for some arguments here :D

Offline shansoft

  • Posts: 111
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2567 on: Sat, 26 November 2022, 02:34:37 »
Why does your weight look more recessed into the body? looks baa.d

Not sure...I have the same question as well......  :(
Collections: Mysterium TKL / leaf80 Blue Alps / Tiamo V2 / Tiamo V3 / Drop CTRL Canvas / KBD19x / Equalz Zer0.9 PC / Percent Volt80 / Satisfaction 75 / Kira 80 / Rama U80 / Keycult No1Rev1 / Keycult No2Rev1 / E8.5 / Mode 80 FE / J02 LE / Equalz Zer0.9 EE / Kepler TKL / Gemini TKL / Time80Re / Jane V2 / Jane V2 CE / Mr Suit / KFE CE

Offline mr_foggy

  • Posts: 380
  • Location: union of the worst vendors
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2568 on: Sun, 27 November 2022, 16:13:03 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))
ME fake jane ;D

Oh really ? Waiting for some arguments here :D

no internal weight, plastic plate, hotswap pcb... some of the points I've seen come up during arguments. not picking sides.

Offline CaesarAZealad

  • Posts: 210
  • Location: Boston, MA
  • Racc
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2569 on: Sun, 27 November 2022, 16:36:06 »
Why do these boards cost more than the life of a minimum wage worker again? I don't see what's special about them, I'd love an explanation.
One, Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten, Eleven, Twelve, Thirteen, Fourteen, Fifteen, Sixteen, Seventeen, Eighteen, Nineteen... Yeah that seems about right.

Offline Fraaaan

  • Posts: 322
  • Location: cucked (EU)
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2570 on: Mon, 28 November 2022, 13:01:56 »
Why do these boards cost more than the life of a minimum wage worker again? I don't see what's special about them, I'd love an explanation.

The board was $550 in GB. Lots of boards nowadays are way more than that.

Offline NightFox99

  • Posts: 93
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2571 on: Tue, 29 November 2022, 07:14:51 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))
ME fake jane ;D

Oh really ? Waiting for some arguments here :D

no internal weight, plastic plate, hotswap pcb... some of the points I've seen come up during arguments. not picking sides.

Actually, it's the contrary. For example, some design upgrades make it even better - like alignement holes and USB-C for example. About backplate : in terms of weight it's the same as CE because Carbon fiber backplate on CE is a joke compensated only with internal weight. Also the QC is excellent, anodisation is perfect. Finally, I have one, so I can tell it's really good, it sounds and looks like a "OG" Jane. The only problem for me is the magnets but strange thing : there are holes for screws on the back side of the bottom part o the case, as if Monokei new magnets were ****, so they made holes just in case. So maybe we'll see an additional screwed plate soon...

Offline vtachkov

  • Posts: 204
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2572 on: Wed, 04 January 2023, 20:39:41 »
Did anyone ever make any brass plates for the V2 CE, or are there any F13 brass plates that are compatible?

Offline shansoft

  • Posts: 111
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 99% completed
« Reply #2573 on: Thu, 05 January 2023, 04:17:55 »
Did anyone ever make any brass plates for the V2 CE, or are there any F13 brass plates that are compatible?

KFE CE brass plate will fit
Collections: Mysterium TKL / leaf80 Blue Alps / Tiamo V2 / Tiamo V3 / Drop CTRL Canvas / KBD19x / Equalz Zer0.9 PC / Percent Volt80 / Satisfaction 75 / Kira 80 / Rama U80 / Keycult No1Rev1 / Keycult No2Rev1 / E8.5 / Mode 80 FE / J02 LE / Equalz Zer0.9 EE / Kepler TKL / Gemini TKL / Time80Re / Jane V2 / Jane V2 CE / Mr Suit / KFE CE

Offline kronograf

  • Posts: 62
  • Location: [SG]
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2574 on: Mon, 09 January 2023, 10:15:04 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))
ME fake jane ;D

Cope from people who want to preserve the secondary value of their boards lel. I've had multiple V2s and V2CEs and the ME is as good as their predecessors quality-wise as far as I'm concerned. Folks are just salty it's mass production now.
 
Might as well say the V2 CE is a fake V2 for not having the external two-piece weight.
alice | jane me

Offline NightFox99

  • Posts: 93
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2575 on: Mon, 09 January 2023, 14:32:47 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))
ME fake jane ;D

Cope from people who want to preserve the secondary value of their boards lel. I've had multiple V2s and V2CEs and the ME is as good as their predecessors quality-wise as far as I'm concerned. Folks are just salty it's mass production now.
 
Might as well say the V2 CE is a fake V2 for not having the external two-piece weight.

Based opinion. Thank you.

Offline loopaddiction

  • Posts: 52
  • Location: Los Angeles
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2576 on: Mon, 09 January 2023, 16:59:12 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))
ME fake jane ;D

Cope from people who want to preserve the secondary value of their boards lel. I've had multiple V2s and V2CEs and the ME is as good as their predecessors quality-wise as far as I'm concerned. Folks are just salty it's mass production now.
 
Might as well say the V2 CE is a fake V2 for not having the external two-piece weight.

100%. Plus, a ton of the V2 CE's out there (and V2's for that matter) are actual fake Kalam Janes. Just browsing YT, Discord, IG...how TF do so many people have one when they were so scarcely limited in production? Oh right...

But this is the type of virgin-energy copium and gate-keeping that's in every "enthusiast" hobby.
« Last Edit: Mon, 09 January 2023, 17:02:48 by loopaddiction »

Offline mr_foggy

  • Posts: 380
  • Location: union of the worst vendors
Re: [GB] TGR-Jane v2 CE (QC, Shipping) 50% completed
« Reply #2577 on: Tue, 10 January 2023, 09:28:49 »
Imagine waiting 3 years for this GB just for the new ME to get announced. Can't be me  :))
ME fake jane ;D

Oh really ? Waiting for some arguments here :D

no internal weight, plastic plate, hotswap pcb... some of the points I've seen come up during arguments. not picking sides.

Actually, it's the contrary. For example, some design upgrades make it even better - like alignement holes and USB-C for example. About backplate : in terms of weight it's the same as CE because Carbon fiber backplate on CE is a joke compensated only with internal weight. Also the QC is excellent, anodisation is perfect. Finally, I have one, so I can tell it's really good, it sounds and looks like a "OG" Jane. The only problem for me is the magnets but strange thing : there are holes for screws on the back side of the bottom part o the case, as if Monokei new magnets were ****, so they made holes just in case. So maybe we'll see an additional screwed plate soon...

I don't care. I repeat they're not my opinions, I was just answering a question. personally I think all the ME hate is gatekeeper copium