[GB] TGR-Alice - 100% Completed

[aeryxz]

Getting some wood looking at wood
Here some progress

Sent from my Pixel 2 using Tapatalk

[I_need_a_bath]

Anyone with red/red interested in swapping for silver/silver?

that’s a hard swap my dude

Silver usually ends up being an underrated/under-ordered colorway, and this silver is gonna be very nice

[Remsky]

Anyone with red/red interested in swapping for silver/silver?

that’s a hard swap my dude

Silver usually ends up being an underrated/under-ordered colorway, and this silver is gonna be very nice

I see people order silver a lot of the time in GB's.

[SixtyLife]

Anyone with red/red interested in swapping for silver/silver?

that’s a hard swap my dude

Silver usually ends up being an underrated/under-ordered colorway, and this silver is gonna be very nice

I see people order silver a lot of the time in GB's.

can't go wrong with silver. og beige + silver = best combo

[AstralBandit]

I absolutely need those extras!!!!


Sent from my iPhone using Tapatalk

[Puddsy]

Anyone with red/red interested in swapping for silver/silver?

that’s a hard swap my dude

Silver usually ends up being an underrated/under-ordered colorway, and this silver is gonna be very nice

I see people order silver a lot of the time in GB's.

can't go wrong with silver. og beige + silver = best combo

or soware

[clasicks]

removed

[Lndefinite]

Dang, I wish I was fast enough to get in on this one

[slk]

could be wrong place..but any chance of a r2 tgr 910?

[Brannan]

Correct me if I'm wrong, but the Alice needs 5 x 2u stabs right?

[Hongook]

Just getting into mechanical keyboards and this is such a unique layout. Hopefully there will be a R2 in the future.

[watchy0ubac]

Big regret not getting in on this in time. Would love to see an R2, however unlikely it may be!

[kmba]

Yes, 5x2u stabs for the layout shown in the original prototype. You can split backspace or iso left shift tho and reduce to 4 or even 3.

All this talk about r2.. you people missed where he said there are going to be extras or every color??

[Puddsy]

Yes, 5x2u stabs for the layout shown in the original prototype. You can split backspace or iso left shift tho and reduce to 4 or even 3.

All this talk about r2.. you people missed where he said there are going to be extras or every color??

ETF said people need 20 posts to enter his sale so they're all taking after me and posting without reading the rest of the thread

[darkslay3r]

i think this round will be fine, like no delay at all 

[Kafka]

Yes, 5x2u stabs for the layout shown in the original prototype. You can split backspace or iso left shift tho and reduce to 4 or even 3.

All this talk about r2.. you people missed where he said there are going to be extras or every color??

ETF said people need 20 posts to enter his sale so they're all taking after me and posting without reading the rest of the thread

nice

[Puddsy]

Yes, 5x2u stabs for the layout shown in the original prototype. You can split backspace or iso left shift tho and reduce to 4 or even 3.

All this talk about r2.. you people missed where he said there are going to be extras or every color??

ETF said people need 20 posts to enter his sale so they're all taking after me and posting without reading the rest of the thread

nice

yes exactly

[superdoedoe]

Yes, 5x2u stabs for the layout shown in the original prototype. You can split backspace or iso left shift tho and reduce to 4 or even 3.

All this talk about r2.. you people missed where he said there are going to be extras or every color??

ETF said people need 20 posts to enter his sale so they're all taking after me and posting without reading the rest of the thread

nice

yes exactly

nice

[xondat]

Yes, 5x2u stabs for the layout shown in the original prototype. You can split backspace or iso left shift tho and reduce to 4 or even 3.

All this talk about r2.. you people missed where he said there are going to be extras or every color??

ETF said people need 20 posts to enter his sale so they're all taking after me and posting without reading the rest of the thread

nice

yes exactly

I'd disagree and say it's bloody annoying.

P.S. Holy hell that production time... Jealous.

[Puddsy]

Yes, 5x2u stabs for the layout shown in the original prototype. You can split backspace or iso left shift tho and reduce to 4 or even 3.

All this talk about r2.. you people missed where he said there are going to be extras or every color??

ETF said people need 20 posts to enter his sale so they're all taking after me and posting without reading the rest of the thread

nice

yes exactly

I'd disagree and say it's bloody annoying.

that's the joke

P.S. Holy hell that production time... Jealous.

https://geekhack.org/index.php?topic=94154.msg2606082#msg2606082

[xondat]

I'd disagree and say it's bloody annoying.

that's the joke

P.S. Holy hell that production time... Jealous.

https://geekhack.org/index.php?topic=94154.msg2606082#msg2606082

Ahhh I'm too asleep.

Yup. No delays yet!

[aeryxz]

Getting some wood looking at wood
Here some progress

Show Image

Sent from my Pixel 2 using Tapatalk

One more week to order your wooden wrist rest. I can take custom orders for extras too when they get announced, just pm me.

The one with engrave is wenge wood.

Sent from my Pixel 2 using Tapatalk

[LightningXI]

Getting some wood looking at wood
Here some progress

Show Image

Sent from my Pixel 2 using Tapatalk

One more week to order your wooden wrist rest. I can take custom orders for extras too when they get announced, just pm me.

The one with engrave is wenge wood.

Show Image

Show Image

Show Image

Show Image

Sent from my Pixel 2 using Tapatalk

Beautiful. Which of these would suit the vivid color of a Red Alice?

Sent from my mobile using Tapatalk

[eyedrop]

Show Image

Beautiful.  Can you tell us which type of wood are these in the picture?

[dimo]

Getting some wood looking at wood
Here some progress

Show Image

Sent from my Pixel 2 using Tapatalk

One more week to order your wooden wrist rest. I can take custom orders for extras too when they get announced, just pm me.

The one with engrave is wenge wood.

Show Image

Show Image

Show Image

Show Image

Sent from my Pixel 2 using Tapatalk

Why is there such a large difference in the pictures? The wenge looks nice and matte in the first few but in the last one looks shiney and pretty bad, did I miss something.

[dimo]

Is the polycarb rest still being made by the other person? Or did I miss the invoice

[Vigrith]

Why is there such a large difference in the pictures? The wenge looks nice and matte in the first few but in the last one looks shiney and pretty bad, did I miss something.

Pretty sure the last picture is varnished and the others aren't, or some sort of treatment like that.

[dimo]

Why is there such a large difference in the pictures? The wenge looks nice and matte in the first few but in the last one looks shiney and pretty bad, did I miss something.

Pretty sure the last picture is varnished and the others aren't, or some sort of treatment like that.

that makes sense :> i hope we can choose


Sent from my iPhone using Tapatalk

[aeryxz]

Show Image

Beautiful.  Can you tell us which type of wood are these in the picture?

Wenge, purple heart, merbau and karri

Sent from my Pixel 2 using Tapatalk

[aeryxz]

Why is there such a large difference in the pictures? The wenge looks nice and matte in the first few but in the last one looks shiney and pretty bad, did I miss something.

Pretty sure the last picture is varnished and the others aren't, or some sort of treatment like that.

that makes sense :> i hope we can choose


Sent from my iPhone using Tapatalk

Yes sir, that's correct. I can do a tung oil which is what I used on the pic with the 4 finished rests
or I have a polyurethane finish that comes up more glossy. I'll add that to the form

Sent from my Pixel 2 using Tapatalk

[Duckunderscore]

I can't even use an ergo and  I want one of those wrist rests just because of how nice they are lmao

[dimo]

I can't even use an ergo and  I want one of those wrist rests just because of how nice they are lmao

Thanks! That sounds great c:

[aeryxz]

I can't even use an ergo and  I want one of those wrist rests just because of how nice they are lmao

Do you use a 60%? the next design I'm planning to make is fit for 60% keyboards

Also tonight I will close the form and start sending emails and invoices. Thanks for the support for the joiners.

Sent from my Pixel 2 using Tapatalk

[aeryxz]

Getting some wood looking at wood
Here some progress

Show Image

Sent from my Pixel 2 using Tapatalk

One more week to order your wooden wrist rest. I can take custom orders for extras too when they get announced, just pm me.

The one with engrave is wenge wood.

Show Image

Show Image

Show Image

Show Image

Sent from my Pixel 2 using Tapatalk

Beautiful. Which of these would suit the vivid color of a Red Alice?

Sent from my mobile using Tapatalk

I asked my carpenter, he says that it's tricky since a lot of woods are reddish in nature. Darker woods will probably work.

Sent from my Pixel 2 using Tapatalk

[aeryxz]

Is the polycarb rest still being made by the other person? Or did I miss the invoice

I believe beamingrobot is doing the polycarb version.

Sent from my Pixel 2 using Tapatalk

[beamingrobot]

Poly wrist rest email has been sent out, I'll update via email instead of this thread from now on. If you still want in and you're not on the email list, here's a link:

https://monokei.us/products/alice-wrist-rest

[DormantLemon]

Poly wrist rest email has been sent out, I'll update via email instead of this thread from now on. If you still want in and you're not on the email list, here's a link:

https://monokei.us/products/alice-wrist-rest

It looks so beautiful. Wish I could grab one, but missed the GB and who knows of I'll manage to grab any leftover

Sent from my CLT-L09 using Tapatalk

[dimo]

Poly wrist rest email has been sent out, I'll update via email instead of this thread from now on. If you still want in and you're not on the email list, here's a link:

https://monokei.us/products/alice-wrist-rest

I'm innnnnnnnnnnnnn

[PandaRooooong]

Getting some wood looking at wood
Here some progress

Show Image

Sent from my Pixel 2 using Tapatalk

One more week to order your wooden wrist rest. I can take custom orders for extras too when they get announced, just pm me.

The one with engrave is wenge wood.

Show Image

Show Image

Show Image

Show Image

Sent from my Pixel 2 using Tapatalk

What is different between Tung oil and polyurethane? :confused:
I prefer glossy but Tung oil is recommended :confused: :confused: :confused: :confused:

[aeryxz]

Getting some wood looking at wood
Here some progress

Show Image

Sent from my Pixel 2 using Tapatalk

One more week to order your wooden wrist rest. I can take custom orders for extras too when they get announced, just pm me.

The one with engrave is wenge wood.

Show Image

Show Image

Show Image

Show Image

Sent from my Pixel 2 using Tapatalk

What is different between Tung oil and polyurethane? :confused:
I prefer glossy but Tung oil is recommended :confused: :confused: :confused: :confused:

Both are finishes put onto the wood at the end. All the current ones are treated with the tung oil and provides a matte finish.

I can ask about the glossy finish if you wish

Sent from my Pixel 2 using Tapatalk

[zekkin]

Poly wrist rest email has been sent out, I'll update via email instead of this thread from now on. If you still want in and you're not on the email list, here's a link:

https://monokei.us/products/alice-wrist-rest

Any word on adjusting the wrist rest to have spots for bump-ons?

[p_blaze]

Poly wrist rest email has been sent out, I'll update via email instead of this thread from now on. If you still want in and you're not on the email list, here's a link:

https://monokei.us/products/alice-wrist-rest

Do you plan on extending this buy/making a second run for the extras?

[DormantLemon]

Poly wrist rest email has been sent out, I'll update via email instead of this thread from now on. If you still want in and you're not on the email list, here's a link:

https://monokei.us/products/alice-wrist-rest

Do you plan on extending this buy/making a second run for the extras?

I would like this. Would join in a heartbeat if I could secure a board

Sent from my CLT-L09 using Tapatalk

[aeryxz]

Hi, I just talked with my carpenter. He says he can probably offer a 10usd discount if that entices you to join. I've left the form up same link as before.

If you joined the wood buy I'll also give you the discount when I invoice you.


Sent from my Pixel 2 using Tapatalk

[PandaRooooong]

Getting some wood looking at wood
Here some progress

Show Image

Sent from my Pixel 2 using Tapatalk

One more week to order your wooden wrist rest. I can take custom orders for extras too when they get announced, just pm me.

The one with engrave is wenge wood.

Show Image

Show Image

Show Image

Show Image

Sent from my Pixel 2 using Tapatalk

What is different between Tung oil and polyurethane? :confused:
I prefer glossy but Tung oil is recommended :confused: :confused: :confused: :confused:

Both are finishes put onto the wood at the end. All the current ones are treated with the tung oil and provides a matte finish.

I can ask about the glossy finish if you wish

Sent from my Pixel 2 using Tapatalk

Do you have photo to compare two coating different? :confused:

[dimo]

Getting some wood looking at wood
Here some progress

Show Image

Sent from my Pixel 2 using Tapatalk

One more week to order your wooden wrist rest. I can take custom orders for extras too when they get announced, just pm me.

The one with engrave is wenge wood.

Show Image

Show Image

Show Image

Show Image

Sent from my Pixel 2 using Tapatalk

What is different between Tung oil and polyurethane? :confused:
I prefer glossy but Tung oil is recommended :confused: :confused: :confused: :confused:

Both are finishes put onto the wood at the end. All the current ones are treated with the tung oil and provides a matte finish.

I can ask about the glossy finish if you wish

Sent from my Pixel 2 using Tapatalk

Do you have photo to compare two coating different? :confused:

the last picture is “glossy” the rest are matte. Looks pretty clear to me

[aeryxz]

Getting some wood looking at wood
Here some progress

Show Image

Sent from my Pixel 2 using Tapatalk

One more week to order your wooden wrist rest. I can take custom orders for extras too when they get announced, just pm me.

The one with engrave is wenge wood.

Show Image

Show Image

Show Image

Show Image

Sent from my Pixel 2 using Tapatalk

What is different between Tung oil and polyurethane? :confused:
I prefer glossy but Tung oil is recommended :confused: :confused: :confused: :confused:

Both are finishes put onto the wood at the end. All the current ones are treated with the tung oil and provides a matte finish.

I can ask about the glossy finish if you wish

Sent from my Pixel 2 using Tapatalk

Do you have photo to compare two coating different? :confused:

the last picture is “glossy” the rest are matte. Looks pretty clear to me

Sorry I may have confused you all with no context in the pics.
The picture in which it was glossy was the finish being put on.

The image with the stack, the Tasmania oak has a glossy finish (the light coloured one at the back) but the lighting and picture doesn't show it off. I'll post up a side by side asap.


Sent from my Pixel 2 using Tapatalk

[Puddsy]

any updates?

[cumwagondeluxe]

fug i'm gonna be sad as h*ck if i don't manage to snag one of these bad boys when extras come up :"^)

is there a spreadsheet with current color choices from people who've already ordered? i wonder what the current favourite is

[nastrovje]

For anyone who hasn't seen yuktsi's IG story update