Author Topic: [GB] J-01 Rev 1 - Group Buy Complete - Extras Early November  (Read 35630 times)

0 Members and 1 Guest are viewing this topic.

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #50 on: Thu, 03 September 2020, 23:29:24 »
Hey Jae. Thanks for providing your time and effort into make this great looking keyboard. I hope im one of the lucky few to get one.

Thanks for the support, it really means the world - best of luck on Sat!

I love the classic design with the macro pads, I hope I can get one. Thanks for your work Jae!

I hope everyone who buys is someone who really wants one  :thumb:

Don't worry about all the people salty that you aren't doing more. They're not the ones that have to do hours of qc, design, planning, logistics, etc. This is a beautiful board and I hope I'm lucky enough to get one!

Sent from my Pixel 4 XL using Tapatalk



I know there will always be people unhappy with any decision, but that doesnt mean I should stop striving to please as many as possible within the boundaries I'm comfortable with. Best of luck on Saturday!!

Offline Spicemaster

  • Posts: 14
  • Location: NJ USA
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #51 on: Fri, 04 September 2020, 10:13:44 »
Is there a set distribution for each color to be sold? Like 70/80 of the three colors? Or is it based off of demand from those first ~200 that are purchased to figure out how many of each color there is?

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #52 on: Fri, 04 September 2020, 10:20:45 »
Is there a set distribution for each color to be sold? Like 70/80 of the three colors? Or is it based off of demand from those first ~200 that are purchased to figure out how many of each color there is?


No set distribution needed


Sent from my iPhone using Tapatalk Pro

Offline dmatx1

  • Posts: 145
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #53 on: Fri, 04 September 2020, 10:24:25 »
I was slow.

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #54 on: Fri, 04 September 2020, 13:34:42 »
Oops.   I just noticed that the time conversion in your OG post says 11:00 pm CST.  That should be 10:00am CST.   Central time REPRESENT.  We got this, boys.  Time to win one for the middle of the US

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #55 on: Fri, 04 September 2020, 13:38:42 »
Oops.   I just noticed that the time conversion in your OG post says 11:00 pm CST.  That should be 10:00am CST.   Central time REPRESENT.  We got this, boys.  Time to win one for the middle of the US

The 11pm CST was Chinese Standard Time (Beijing). The first two listed were US times but you are correct on it being 10am Central US time :)

I’ve updated the OP to be clear


Sent from my iPhone using Tapatalk Pro

Offline Kings

  • Posts: 44
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #56 on: Fri, 04 September 2020, 16:19:51 »
Let's say we are lucky enough to purchase a board and want to purchase extras afterwards. Will there be a small window to do so or will it be cancelled since the board is not in the same cart?

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #57 on: Fri, 04 September 2020, 16:21:51 »
Let's say we are lucky enough to purchase a board and want to purchase extras afterwards. Will there be a small window to do so or will it be cancelled since the board is not in the same cart?

If buying extras after the board, add the order number from your board purchase to the comments box on checkout or Email me to add extras directly. Extras will likely be listed until 24 hours after the boards sell


Sent from my iPhone using Tapatalk Pro

Offline dRpkebs

  • Posts: 22
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #58 on: Fri, 04 September 2020, 17:51:16 »
If I'm lucky enough to add one to the cart on Saturday, will having it in the cart pretty much guarantee that I'll get one after I checkout and pay? Or does adding it to the cart mean nothing until you actually pay and get a confirmation email?

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #59 on: Fri, 04 September 2020, 17:52:41 »
If I'm lucky enough to add one to the cart on Saturday, will having it in the cart pretty much guarantee that I'll get one after I checkout and pay? Or does adding it to the cart mean nothing until you actually pay and get a confirmation email?


Having it in cart does not reserve it. It has to be checked out.


Sent from my iPhone using Tapatalk Pro

Offline alleneentrekin

  • Posts: 22
  • Location: US
    • j
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #60 on: Fri, 04 September 2020, 17:52:54 »
If I'm lucky enough to add one to the cart on Saturday, will having it in the cart pretty much guarantee that I'll get one after I checkout and pay? Or does adding it to the cart mean nothing until you actually pay and get a confirmation email?
I would assume that you are guaranteed to get one once you check out. It wouldn't make much sense to reserve a board for someone if all they do is add it to the cart.

Sent from my Pixel 4 XL using Tapatalk


Offline dRpkebs

  • Posts: 22
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #61 on: Fri, 04 September 2020, 17:54:12 »
If I'm lucky enough to add one to the cart on Saturday, will having it in the cart pretty much guarantee that I'll get one after I checkout and pay? Or does adding it to the cart mean nothing until you actually pay and get a confirmation email?


Having it in cart does not reserve it. It has to be checked out.


Sent from my iPhone using Tapatalk Pro


Okay thanks!

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #62 on: Sat, 05 September 2020, 09:00:34 »
PLEASE READ CAREFULLY:

The extras for the J-01 Standard Edition are now live (plates/PCBs/Pen Rails) here:
https://prototypist.net/collections/j-01-standard-edition/products/group-buy-j-01-rev-1-standard-edition-extras

You can add these to cart ready to add your board in one hour when the board goes on sale at 4pm UK time.

Please do not checkout with just these items - any order doing so prior to the board going live will be cancelled and refunded.

-------------------------

For the main GB for the Standard Edition in 1 hour - remember

- you are limited to one board per order;
- you can add extras later via a secondary order and adding your board order number to the comments or by emailing jae@prototypist.net
- transactions will be cancelled if its an obvious bot transaction - this will be at my sole discretion...

Offline Starius

  • Posts: 602
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #63 on: Sat, 05 September 2020, 10:02:48 »
Damn, sold out already!   :'(

Offline Kings

  • Posts: 44
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #64 on: Sat, 05 September 2020, 10:06:37 »
PLEASE READ CAREFULLY:

The extras for the J-01 Standard Edition are now live (plates/PCBs/Pen Rails) here:
https://prototypist.net/collections/j-01-standard-edition/products/group-buy-j-01-rev-1-standard-edition-extras

You can add these to cart ready to add your board in one hour when the board goes on sale at 4pm UK time.

Please do not checkout with just these items - any order doing so prior to the board going live will be cancelled and refunded.

-------------------------

For the main GB for the Standard Edition in 1 hour - remember

- you are limited to one board per order;
- you can add extras later via a secondary order and adding your board order number to the comments or by emailing jae@prototypist.net
- transactions will be cancelled if its an obvious bot transaction - this will be at my sole discretion...

Extras seem to have disappeared. Will they come back up?

EDIT: Nevermind, they came back. Thanks!
« Last Edit: Sat, 05 September 2020, 10:08:29 by Kings »

Offline Jyobah

  • Posts: 42
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #65 on: Sat, 05 September 2020, 10:08:24 »
I ..was..to..slow 😢

Offline Starius

  • Posts: 602
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #66 on: Sat, 05 September 2020, 10:09:31 »
I ..was..to..slow 😢

I blame typing in my credit card number..... wish Paypal had been an option!

Offline MajorZoT

  • Posts: 12
  • Location: Germany
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #67 on: Sat, 05 September 2020, 10:15:05 »
I ..was..to..slow 😢

I blame typing in my credit card number..... wish Paypal had been an option!

By the time i got to the checkout 4 minutes after the launch it was already too late  :))

Offline jimboytacos

  • Posts: 235
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #68 on: Sat, 05 September 2020, 10:22:52 »
I must an idiot, but where was the link to the standard edition?

I didn't even see it here:
https://prototypist.net/collections/j-01-standard-edition


Was it a form link?


So bummed. I even woke up at 6am for this too ..

Offline Starius

  • Posts: 602
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #69 on: Sat, 05 September 2020, 10:29:24 »
I must an idiot, but where was the link to the standard edition?

I didn't even see it here:
https://prototypist.net/collections/j-01-standard-edition


Was it a form link?


So bummed. I even woke up at 6am for this too ..

That was the correct link, but it was quickly deactivated after everything sold out. (Which it did in under 2 minutes by my estimation.)

Offline wazzuppi

  • Posts: 2
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #70 on: Sat, 05 September 2020, 10:36:40 »
Seriously bummed missing out on this one

I ordered about 1 minute after the release time and 1 extra had shown sold out and once it refreshed again everything was sold out. Insane

Obviously just too much interest and not enough sold :(
« Last Edit: Sat, 05 September 2020, 10:40:31 by wazzuppi »

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #71 on: Sat, 05 September 2020, 10:37:38 »
And we are done...

So the API to limit the boards to 200 failed - and we ended up north of that...I'm not sure where yet but we hit 250 at 36 seconds... I'll provide more details later and the Raffle will go live on the hour for the 50 additional boards - raffle open 24 hours. Link here soon

For clarity I will only be cancelling Botted orders not people who got in on the GB - had so many DMs on this so apologies if I dont reply to them all

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #72 on: Sat, 05 September 2020, 11:08:39 »
Raffle form is here:

https://docs.google.com/forms/d/14ZzJ6lCCPFyujERWiHS8gUHf89-FAS5ghV30iaVZsgs

Anyone with an order already will be removed from the list, and any cancelled order from bots will be banned


Form Open 24 hours - winners drawn and notified as per details on the form

Offline neutralstate

  • Posts: 152
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #73 on: Sat, 05 September 2020, 11:17:36 »
really happy to have managed to grab one.

in the rush to purchase the board i realized there wasn't an option to pick ANSI or ISO plate, will there be an email or form opening later to select this?

Edit: saw this in the item listing: Plates - after the GB closes all successful buyers will receive a form via email to select their Plate material (FR4 or CF) and layout (Fixed ISO or Fixed ANSI). 

Don't see the in the form in my email yet though, hope it's not something wrong on my end!
« Last Edit: Sat, 05 September 2020, 11:49:34 by neutralstate »

Offline Jyobah

  • Posts: 42
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #74 on: Sat, 05 September 2020, 11:25:54 »
In for the raffle. 🙏🏻

Offline art3mis

  • Posts: 10
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #75 on: Sat, 05 September 2020, 11:31:35 »
Hopefully more luck with the raffle  :D

Offline dmatx1

  • Posts: 145
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #76 on: Sat, 05 September 2020, 12:55:22 »
in the rush to purchase the board i realized there wasn't an option to pick ANSI or ISO plate, will there be an email or form opening later to select this?
Check your inbox, Jae has sent out emails for FCFS buyers an hour ago.

Offline Curin Derwin

  • Posts: 142
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #77 on: Sat, 05 September 2020, 19:29:46 »
Is there still time for a chance at this?

Offline neutralstate

  • Posts: 152
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #78 on: Sat, 05 September 2020, 19:55:22 »
in the rush to purchase the board i realized there wasn't an option to pick ANSI or ISO plate, will there be an email or form opening later to select this?
Check your inbox, Jae has sent out emails for FCFS buyers an hour ago.

saw it, thanks all!

Offline Curin Derwin

  • Posts: 142
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #79 on: Sat, 05 September 2020, 20:00:33 »
10 or 8 key. Hm...

Offline Blastoise

  • Posts: 57
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #80 on: Sat, 05 September 2020, 20:50:04 »
Good luck everyone! Hopefully, you got the 10. That’s the way to go  :) :)

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #81 on: Sun, 06 September 2020, 00:59:37 »
Good luck everyone! Hopefully, you got the 10. That’s the way to go  :) :)
I’ll have some better numbers later but it def seems 8 key was most popular rn



Just about to start on the support emails following the GB - please be patient as there are quite a few. If you need to add anything to your order, or merge a board order and some extras please drop me an email through the contact us form on the site before 8am UK time on Monday. That’s the cut off for changes.

Raffle will still be drawn today after it closes and winners will be notified via email; with invoices sent on Monday


Sent from my iPhone using Tapatalk Pro

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #82 on: Sun, 06 September 2020, 12:20:04 »
Quick update

Raffle has closed and been drawn

Winners have been notified by email and will be invoiced within 48 hours. Once they receive the invoice they will have 24 hours to pay.

Once all raffle winners are squared away I'll release some overall stats for the GB - in approx a week.


For FCFS Winners, you have about 12 hours remaining to order extras via an email to jae@prototypist.net

Offline Starius

  • Posts: 602
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #83 on: Sun, 06 September 2020, 14:00:39 »
Quick update

Raffle has closed and been drawn

Winners have been notified by email and will be invoiced within 48 hours. Once they receive the invoice they will have 24 hours to pay.

Once all raffle winners are squared away I'll release some overall stats for the GB - in approx a week.


For FCFS Winners, you have about 12 hours remaining to order extras via an email to jae@prototypist.net

I know it is FAR too early to even think about such things now, but I'm pretty sure you are going to get Round 2 questions in the future. ;)

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #84 on: Mon, 07 September 2020, 04:32:25 »
ok the window for J-01 FCFS buyers to submit changes/add extras is closed as of now - Any requests I have I'll honour, where possible, but any requests received from now will be declined.

This does not apply to Raffle winners awaiting invoices.

It's going to take me a number of days to get through all the requests - please be patient, I'll confirm via email once your request has been completed

Offline yhs

  • Posts: 103
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #85 on: Mon, 07 September 2020, 04:45:56 »
Very excited for this one!

Offline dRpkebs

  • Posts: 22
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #86 on: Mon, 07 September 2020, 09:59:25 »
I should've ordered an extra pcb.

Sent from my SM-G975U using Tapatalk


Offline Jyobah

  • Posts: 42
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #87 on: Mon, 07 September 2020, 12:28:52 »
Assuming im taking an L on the raffle  :'(

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #88 on: Mon, 07 September 2020, 12:29:34 »
Assuming im taking an L on the raffle  :'(
All the raffle winners got notified - but some did say the mail went to Spam. Always best to check


Sent from my iPhone using Tapatalk Pro

Offline Jyobah

  • Posts: 42
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #89 on: Mon, 07 September 2020, 13:04:51 »
Just double checked but took the L.  There is always next time. Till we meet again  :)

Offline R_Endymion

  • Posts: 6
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #90 on: Mon, 07 September 2020, 14:20:03 »
Assuming im taking an L on the raffle  :'(
All the raffle winners got notified - but some did say the mail went to Spam. Always best to check


Sent from my iPhone using Tapatalk Pro

Glad I saw this comment, I thought I lost and just checked my spam folder and low-and-behold, a winner!

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #91 on: Tue, 08 September 2020, 16:24:08 »
All J-01 support emails have been cleared

All J-01 Invoices have been sent (or you have an email providing next steps needed within the next 24 hours)

If you think I've missed something - please let me know ASAP by emailing jae@prototypist.net.

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #92 on: Tue, 08 December 2020, 05:22:10 »
Production is well underway - just wanted to share some pics I posted in discord for users who are only on GH



Offline hottrout

  • Posts: 1487
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #93 on: Thu, 10 December 2020, 05:08:07 »
:)
Current Daily Driver : Virgo - Ultramarine - Standard Lube  |  WTB : Topre Realforce Hi-Pro, please PM me if you have one for sale.

Systems -
More
Work |i9-7940x@4.8ghz|32GB(3600)|STRIX-RTX3090Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-13900ks|32GB(7300)|Rog RTX 4090|Asus Z790 Rog Maximus Hero|Torrent Air|2TB 990 Pro|2TB 990 Pro|Dell AW3423DW QOLED|NEC MultiSync|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 40 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, keyboards, games and manuals. 100's of systems including every Amiga model made
  Keyboards -
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Apple (all of them) | Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Moon | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Hyper 7 | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold | OwLab Voice65 Grey | BOX 75 Black Stainless Steel | Onyx E-White | Ikki68 BT Charcoal | Smith & Rune Iron 165 Graphite & Stainless Steel | Epoch 80% Black | RAMA Thermal SEQ2 Kuro | Paper Crane Gerald65 SE PC & CF | CB1800 ZANBATO | GLiTCH | Eclipse Grey & SS | TGR Tomo Silver | Mountain Ergo Black | Keebwerk NASU Black/Red | Phase One 65 Grey | Command TKL Fire | Chalice Frosted | VIENDI 8L Shadow | | Vulcan Maja PC | Glove 80 | Matrix 8XV 3.0 Starry Night | Sagittarius Grey Lilac | AKB OGR & Numpad Dolch | Type K Black

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #94 on: Mon, 22 February 2021, 13:24:46 »
Just to provide a quick update - everything is still on track. All parts are ordered / are in production and expected to deliver on time for customer shipping to start in June

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Production Complete - now packing at manu
« Reply #95 on: Mon, 07 June 2021, 08:48:57 »
Manufacturing has completed and packing is now underway. Boards should ship to me this month and then to customers asap. Weekly updates posted on the Prototypist website

Offline hottrout

  • Posts: 1487
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: [GB] J-01 Rev 1 - Production Complete - now packing at manu
« Reply #96 on: Tue, 08 June 2021, 14:32:05 »
:) :)
Current Daily Driver : Virgo - Ultramarine - Standard Lube  |  WTB : Topre Realforce Hi-Pro, please PM me if you have one for sale.

Systems -
More
Work |i9-7940x@4.8ghz|32GB(3600)|STRIX-RTX3090Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-13900ks|32GB(7300)|Rog RTX 4090|Asus Z790 Rog Maximus Hero|Torrent Air|2TB 990 Pro|2TB 990 Pro|Dell AW3423DW QOLED|NEC MultiSync|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 40 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, keyboards, games and manuals. 100's of systems including every Amiga model made
  Keyboards -
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Apple (all of them) | Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Moon | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Hyper 7 | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold | OwLab Voice65 Grey | BOX 75 Black Stainless Steel | Onyx E-White | Ikki68 BT Charcoal | Smith & Rune Iron 165 Graphite & Stainless Steel | Epoch 80% Black | RAMA Thermal SEQ2 Kuro | Paper Crane Gerald65 SE PC & CF | CB1800 ZANBATO | GLiTCH | Eclipse Grey & SS | TGR Tomo Silver | Mountain Ergo Black | Keebwerk NASU Black/Red | Phase One 65 Grey | Command TKL Fire | Chalice Frosted | VIENDI 8L Shadow | | Vulcan Maja PC | Glove 80 | Matrix 8XV 3.0 Starry Night | Sagittarius Grey Lilac | AKB OGR & Numpad Dolch | Type K Black

Offline Jae-3soteric

  • Thread Starter
  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Shipping to customers in progress (95% shipped)
« Reply #97 on: Wed, 29 September 2021, 11:36:55 »
All boards apart from a handful of address issues and other small parts have been shipped - 95% of boards on the way to customers

Offline hottrout

  • Posts: 1487
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: [GB] J-01 Rev 1 - Shipping to customers in progress (95% shipped)
« Reply #98 on: Wed, 29 September 2021, 15:11:00 »
:) :) :)
Current Daily Driver : Virgo - Ultramarine - Standard Lube  |  WTB : Topre Realforce Hi-Pro, please PM me if you have one for sale.

Systems -
More
Work |i9-7940x@4.8ghz|32GB(3600)|STRIX-RTX3090Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-13900ks|32GB(7300)|Rog RTX 4090|Asus Z790 Rog Maximus Hero|Torrent Air|2TB 990 Pro|2TB 990 Pro|Dell AW3423DW QOLED|NEC MultiSync|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 40 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, keyboards, games and manuals. 100's of systems including every Amiga model made
  Keyboards -
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Apple (all of them) | Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Moon | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Hyper 7 | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold | OwLab Voice65 Grey | BOX 75 Black Stainless Steel | Onyx E-White | Ikki68 BT Charcoal | Smith & Rune Iron 165 Graphite & Stainless Steel | Epoch 80% Black | RAMA Thermal SEQ2 Kuro | Paper Crane Gerald65 SE PC & CF | CB1800 ZANBATO | GLiTCH | Eclipse Grey & SS | TGR Tomo Silver | Mountain Ergo Black | Keebwerk NASU Black/Red | Phase One 65 Grey | Command TKL Fire | Chalice Frosted | VIENDI 8L Shadow | | Vulcan Maja PC | Glove 80 | Matrix 8XV 3.0 Starry Night | Sagittarius Grey Lilac | AKB OGR & Numpad Dolch | Type K Black

Offline ShandonCodes

  • Posts: 35
Re: [GB] J-01 Rev 1 - Shipping to customers in progress (95% shipped)
« Reply #99 on: Thu, 30 September 2021, 12:42:14 »
Can't wait to start seeing builds with these.