Krog
Have you considered flocking a case?
Krog
Have you considered flocking a case?
Absolutely. I'm going to see how these work out, and then I have a slightly cracked model m case to experiment on. Some of the model m cases have intricate channels that may not receive flock very well. But there are modern cases that are smooth and regular enough. Maybe I could attempt to flock just the bottom of the case first and if that works do the whole thing.
Masking areas off could produce some interesting results too.
I flocked a single clear DCS cap from SP Friday afternoon. I'll be at work tomorrow anyway so it should be dry enough for me to remove the excess flock. Also, because it is clear I plan on illuminating it from below to check my coverage.
Maybe Binge could use this process on his new caps? Mohawk.... Sideburns... Stubble... AFRO CAP!
Is this the same stuff that's used to make grass for tabletop game scenery? Because if so I'd love to have a set of caps(and a case) with this stuff on it, although wouldn't it wear off fast and end up making a mess of both your board and the area surrounding it?
Mohawk.... Sideburns... Stubble... AFRO CAP!
Is this the same stuff that's used to make grass for tabletop game scenery? Because if so I'd love to have a set of caps(and a case) with this stuff on it, although wouldn't it wear off fast and end up making a mess of both your board and the area surrounding it?
Same technique but the flock used in those cases are usually longer. Between 2 and 6 mm. They also mix up the fiber lengths to get a more rough, natural look. My hope is for a microfiber-like finish. It may end up with more of a 'pile' than I expect, but maybe I'll like it? Also, a grass like surface might be cool. Who knows? That's why I'm doing this. But you're absolutely right about durability ... None of this matters if it doesn't adhere well or hold up to constant finger presses.
Is this the same stuff that's used to make grass for tabletop game scenery? Because if so I'd love to have a set of caps(and a case) with this stuff on it, although wouldn't it wear off fast and end up making a mess of both your board and the area surrounding it?
Same technique but the flock used in those cases are usually longer. Between 2 and 6 mm. They also mix up the fiber lengths to get a more rough, natural look. My hope is for a microfiber-like finish. It may end up with more of a 'pile' than I expect, but maybe I'll like it? Also, a grass like surface might be cool. Who knows? That's why I'm doing this. But you're absolutely right about durability ... None of this matters if it doesn't adhere well or hold up to constant finger presses.
Could still be used on a case, though, but it'd probably be a good idea to leave some areas bare. Although going with the wargames terrain train of thought you could make a rocky surface on the areas that would see heavy skin traffic. Would be a badass looking board, with black flock and black rocky terrain, paint the plate orange and use black caps.
I think this is a great idea, hope it works out well. It did remind me of this, the suede/velvet covered Ferrari:
(Attachment Link)
I can also envisage a purple set with Zap Brannigan saying 'mmm, velour'
I think this is a great idea, hope it works out well. It did remind me of this, the suede/velvet covered Ferrari:
(Attachment Link)
I can also envisage a purple set with Zap Brannigan saying 'mmm, velour'
That car is sexy, but can you imagine how much of a pain it would be to clean? It'd get so dirty, so fast!
Also, I really like the idea, but considering how much paints that are specifically intended to defeat our ever persistent fingertips, I'm not confident how well these will hold up under the same circumstances.
Would it be possible to use a dyed epoxy in place of paint, to attempt to overcome the wear issue?The flocking 'paint' that I used is made specifically for flocking, so it's got properties that are similar to a glue. My research has shown that people use everything from white Elmer's glue, to Rustoleum (for duck decoy flocking) to more specialized coatings. Again, I won't know how long the flocking will hold up until I give it time to fully cure, and then start banging away on the keycaps.
Also, Flocked wrist rests?Yeah, I think Beast could make good use of this process. Coat the bottom of a wooden wrist rest with the adhesive, and then flock it for a nice, soft finish. Or maybe even on the top side, as a single stripe -- just mask the areas you don't want flocked. The flocking I used didn't seem to be fazed by the contours of the caps at all, so flocking the bottom of a rest should be even easier.
Maybe what I'll do is make some spacebars and then ship 'em out to people to test, and see how well it works.
Oh, and can I just say how much I appreciate your avatar? He is, to this day, one of my favorite characters from anything. Every word out of his mouth was unadultered brilliant writing.
The Bath mat analogy made me giggle, very interesting project, my only flaw is I really dont like the feel of the texture, but good loom to you!
How is the durability? Does it scratch off?
Does it flatten after some use? Or stay furry?
Interesting results. What was the source of the flock? Also, do you think that overtime, some of the flock fibers would break-off from the keycaps and accumulation of these could be an issue, much like pet hair?
Krogenar, this looks really interesting--I never would have thought of this. I'm sure that some additional prep will help the paint adhesion, but depending it sounds like you may not need it. I imagine different caps may be coated with something like a mold release agent or something that should be removed.
What did you use for paint? I once used Krylon Fusion to paint a monitor frame, and although it took a VERY long time to cure fully, it adhered incredibly well. After about two weeks, I couldn't damage the paint without damaging the plastic underneath.
So how long till we can buy some afro caps or garden caps.
I was kind of just keeping tabs on this thread, but those last pics sold me.
I want some flock up in here! Really curious what a spacebar would feel like.
Must resist urge to make football turf keycaps to go with this:Show Image(http://www.japantrendshop.com//img/filco/midori-turf-keyboard-grass-1.jpg)
I REALLY want to feel this caps. Can i get any? :)
I have no intentions of removing the flock with my fingernails to be honest, so i will be honored if you can toss any keys my way. ^^I REALLY want to feel this caps. Can i get any? :)
I could send you some, but I'm not as proud of them as I would like to be. I'm going to send out a BS spacebar and a few of the better BS keycaps that I flocked to Ray, and I'm going to send Boiler the fully flocked keycap for now, no charge because I don't think they're as good as they could be just yet. I could send you some BS keycaps, but like I said, they're not great. If you try to rip off the undercoating that holds the flocking, say, with a fingernail, you can.
Here's one of the BS keycaps that I was able to strip of it's flocking:
(Attachment Link)
This section of flocking I removed from the keycap with my fingernail. The BS keycaps I have are unprimed, and that was a mistake. But they do feel pretty good. Also, check out the bottom edge of the same keycap, from a different angle:
(Attachment Link)
Ragged edge looks crappy. Had these keycaps been primed, the edges would have been better. I was so excited, you see, to flock that I went nuts, and didn't prepare properly. If all this is acceptable to you, then yeah, I can send you some. But you've been warned.
How does the flocked translucent cap look with a LED underneath?
A photo of my two new flocking fiber colors:
(Attachment Link)
how suede-like are these SpAmRaY?
If flock could be combined with the hair/beard etc on binge caps there would be so much awesome I think it might create a black hole ??? (specifically in my wallet)
How does the flocked translucent cap look with a LED underneath?
Are there more translucent flocking fibers available? Something like small strands of nylon fibers or such?
Do you think it would make a difference if you lightly sanded the surface of the key cap before priming? (Or maybe you already did that, I don't always read everything)
When I flocked these keys, my electrostatic tool was working perfectly. In fact, I felt the static electricity on my forearms, my face, everywhere -- and by the time it was over I was covered in flocking fibers.
When I flocked these keys, my electrostatic tool was working perfectly. In fact, I felt the static electricity on my forearms, my face, everywhere -- and by the time it was over I was covered in flocking fibers.
just think of the halloween costumes you could pull off hahaha
When I flocked these keys, my electrostatic tool was working perfectly. In fact, I felt the static electricity on my forearms, my face, everywhere -- and by the time it was over I was covered in flocking fibers.
just think of the halloween costumes you could pull off hahaha
If I can get longer flock, with brown and black coloring -- The Wookie Keycap
If I can get longer flock, with brown and black coloring -- The Wookie Keycap
:eek: don't tease like that bro.....that would be an awesome keychain cap
Looking really good!
I keep forgetting and rediscovering this thread.
And I keep getting desperate for a batch. I think these would look VERY good in DSA profile.
Also, I'd love to see transparent keycap, white adhesive, LED under it (for a more evenly diffused light, shouldn't show off the edges as much)
If I sent you some DSA caps, would you sand 'em and flock em up? See how the come out in spherical?
I keep forgetting and rediscovering this thread.
And I keep getting desperate for a batch. I think these would look VERY good in DSA profile.
Also, I'd love to see transparent keycap, white adhesive, LED under it (for a more evenly diffused light, shouldn't show off the edges as much)
If I sent you some DSA caps, would you sand 'em and flock em up? See how the come out in spherical?
I can send him some, I've got a pile of red and blue DSA caps from my crap bag that aren't going to be good for anything else!
I keep forgetting and rediscovering this thread.
And I keep getting desperate for a batch. I think these would look VERY good in DSA profile.
Also, I'd love to see transparent keycap, white adhesive, LED under it (for a more evenly diffused light, shouldn't show off the edges as much)
If I sent you some DSA caps, would you sand 'em and flock em up? See how the come out in spherical?
I can send him some, I've got a pile of red and blue DSA caps from my crap bag that aren't going to be good for anything else!
Oh, I totally meant SA profile. FML.
Somebody (I, unfortunately, do not remember who to thank for this) hooked me up with about 15 SA profile caps from their crap bag.
Maybe it was you, Ray.
I'm definitely keeping a select few, but the rest are no use for me to keep, so I'd happily send out 10 or so.
I keep forgetting and rediscovering this thread.
And I keep getting desperate for a batch. I think these would look VERY good in DSA profile.
Also, I'd love to see transparent keycap, white adhesive, LED under it (for a more evenly diffused light, shouldn't show off the edges as much)
If I sent you some DSA caps, would you sand 'em and flock em up? See how the come out in spherical?
I can send him some, I've got a pile of red and blue DSA caps from my crap bag that aren't going to be good for anything else!
I keep forgetting and rediscovering this thread.
And I keep getting desperate for a batch. I think these would look VERY good in DSA profile.
Also, I'd love to see transparent keycap, white adhesive, LED under it (for a more evenly diffused light, shouldn't show off the edges as much)
If I sent you some DSA caps, would you sand 'em and flock em up? See how the come out in spherical?
I have to say, I have been loving my flocked key...it is holding up well and feels oh so nice to press!
Ok, presenting Batch 5:
Ok, presenting Batch 5:
Badwrench, very clever -- I like the idea of the screws holding the keys in place.
Here are some pictures of Batch 5 (typing on them now) in place on my Model M silver label. My wife thinks they look "weird".
... until I stroke the spacebar, ever so gently.
Badwrench, very clever -- I like the idea of the screws holding the keys in place.
Here are some pictures of Batch 5 (typing on them now) in place on my Model M silver label. My wife thinks they look "weird".
I think they look awesome! I love the purple. Does the flocking interfere with key operation though?
... until I stroke the spacebar, ever so gently.
this is the first speech bubble sticker page i'm going to print, just fyi
I've sent out a batch of these guys to Boiler, and we'll see if we can sell them or not. I'm thinking of calling them....
PLuSHcaps and PLuSHbars.
:blank:
Every PLUSHbar and PLUSHcap comes complete with a smoking jacket and a brandy snifter. (brandy not included)
I've sent out a batch of these guys to Boiler, and we'll see if we can sell them or not. I'm thinking of calling them....
PLuSHcaps and PLuSHbars.
:blank:
Every PLUSHbar and PLUSHcap comes complete with a smoking jacket and a brandy snifter. (brandy not included)
:eek:
sMoOtH Operators
I've sent out a batch of these guys to Boiler, and we'll see if we can sell them or not. I'm thinking of calling them....
PLuSHcaps and PLuSHbars.
:blank:
Every PLUSHbar and PLUSHcap comes complete with a smoking jacket and a brandy snifter. (brandy not included)
:o
sMoOtH Operators
(Krog stops idly spinning his brandy snifter, and let's his monocle drop.)
... I like it! This entitles you to a color customized spacebar (right is transferable).
I've sent out a batch of these guys to Boiler, and we'll see if we can sell them or not. I'm thinking of calling them....
PLuSHcaps and PLuSHbars.
:blank:
Every PLUSHbar and PLUSHcap comes complete with a smoking jacket and a brandy snifter. (brandy not included)
:o
sMoOtH Operators
(Krog stops idly spinning his brandy snifter, and let's his monocle drop.)
... I like it! This entitles you to a color customized spacebar (right is transferable).
:thumb:
black 7x cherry profile if you've got it ;)
I've sent out a batch of these guys to Boiler, and we'll see if we can sell them or not. I'm thinking of calling them....
PLuSHcaps and PLuSHbars.
:blank:
Every PLUSHbar and PLUSHcap comes complete with a smoking jacket and a brandy snifter. (brandy not included)
:o
sMoOtH Operators
(Krog stops idly spinning his brandy snifter, and let's his monocle drop.)
... I like it! This entitles you to a color customized spacebar (right is transferable).
:thumb:
black 7x cherry profile if you've got it ;)
... no? :(
Ok then let me think about it!
Or what do you have?
I could always send you a spacebar to flock for me right?
bingecaps is secretly in love with this thread and fuzzy keys.
Pink is not my kind of color, but pink flocking could make a pimp keyboard!The photos I posted have a purplish, sort of 'smoking jacket" color. I was going to call them 'plum', but figured 'merlot' would sound more sophisticated.[/quote]
How is the feel when yo type on it? Rough or soft?
Some logo ideas! Feedback would be appreciated.
(Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link)
Some logo ideas! Feedback would be appreciated.
(Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link)
I like the cursive smooth and the plush that looks like a hedge ;)
:eek: so much flock.....this will be awesome
:o so much flock.....this will be awesome
I'm crossing my fingers. I've got to coat it fast (pre-coated it this time, so the inner walls would match, but not be flocked) and then flock the heck out of it.
So do you just sprinkle the flocking fibers over things or use a sprayer or what?
I googled and found this
(Attachment Link)
^^ That is so cool!!
And just FYI fohat is now in possession of some flocked caps!
^^ That is so cool!!
Thanks, Ray! Yeah, I pulled off the masking tape, and the frame is still curing. But it looks like it came out pretty well. There are some minor issues, but I think I can fix them. I also do not own a QFR, so I can't test how well it connects with the lower half of the case. I'll post some photos tonight. Maybe I'll sell it; I don't think I should buy another keyboard right now, LOL!Quote from: SpamRayAnd just FYI fohat is now in possession of some flocked caps!
Thanks for sending those along to him -- I'd love to get some feedback from him. Hope they're working for him. How about Snoopy? Did he get the spacebar?
Ok, here are some pictures of the QFR case, showing where some excess flocking had to be trimmed.
(Attachment Link)
(Attachment Link)
Those little edges came off with a sharp scissor for most, and a craft knife for the rest. To be honest, I'm not really all that pleased with the case. During flocking some of the fibers hit the case not as individual particles, but as clumps, and that hurt the consistency of the coverage. Where that happened, the flocking is not soft, it's hard. So, not thrilled with this case. It still feels good for the most part, but I think the other QFR case will get a nice paint job, and then a flocking strip or band as an embellishment, but not a complete treatment.
Once you perfect the technique, you can open a Flocking Shoppe and do all sorts of flocking lengths! Fuzzed, brushed, or braided! I still think you need a long-haired flock with a mustache in the center :D
Once you perfect the technique, you can open a Flocking Shoppe and do all sorts of flocking lengths! Fuzzed, brushed, or braided! I still think you need a long-haired flock with a mustache in the center :D
I'm considering getting a longish brown and red flock, mixing them, and then having Doogan paint me some caps with bandoliers across them, and then making Wookie 'Caps.
Wookie Caps.
WOOKIE.
CAPS.
:-X
This project is looking great. I'm excited to see it all come together.
Kroegnar, if you're in the mood for a project, I've got a QFR plate on hand that was destined for the garbage. Pick up a phantom PCB for ~$25, and some switches. You're in business. Unless you want the QFR PCB I destroyed on my first desoldering attempt, but you'd be spending more than $25 of your time trying to get all the keys working again.
If nothing else, it could help you sell it. Just pop some switches into the plate and put it in the case for show when you go to sell it.
My wife is going to threatening to start buying purses again in protest. How will I maintain my position of "no new purses" if I buy another keyboard?
Walk away slowly and don't make eye contact.....that's about the only solution....;)
But really....what if you flocked a GH on a case.....what I had in mind was rough stencil a G and H on a larger part of a case then perhaps somehow magically sand only that area, apply glue/primer whatever it is you put on it to get the flocking to stick and the flock it....just a random early morning though that I will read later and wonder what the heck I was thinking...
Walk away slowly and don't make eye contact.....that's about the only solution.... ;)
Ray... there are purses inside of purses, which are inside other purses! And then there's the mind-numbing differences (Mrs. Krog: "That's not a purse -- it's called a 'clutch'.") and if I don't watch my keyboard purchases all of my financial/moral authority will be gone. GONE. And I will wake up one day inside a giant purse.Quote from: RayBut really....what if you flocked a GH on a case.....what I had in mind was rough stencil a G and H on a larger part of a case then perhaps somehow magically sand only that area, apply glue/primer whatever it is you put on it to get the flocking to stick and the flock it....just a random early morning though that I will read later and wonder what the heck I was thinking...
No, that's a fantastic idea. I have access to a vinyl cutter, so I could cut out a decent GH stencil, apply it, and then flock it. I think the adhesive will hold well enough if it's given a nice long period to cure -- like a week. And if you don't attack the flocked design with knives, fingernails, etc. it will hold up nicely. The flocking has masked very well in the past, and flocking something flat is a lot easier.
Very, very doable.
I'm going to unmask my new spacebars towards the end of the day. They got about 2 hours under the curing lamp yesterday, and about 1.5 hours so far today, plus overnight curing. So by 11 am EST they should have about 7 hours under the heat -- plenty of time to shake off the excess flock.
Here they are:
And what were saying is we could make flocked decals/stickers right?
(Attachment Link)
so you could make me one of these ^^ with a flocked beard :o
And what were saying is we could make flocked decals/stickers right?
(Attachment Link)
so you could make me one of these ^^ with a flocked beard :o
Well, no, I was saying I could use a cut vinyl sticker as a mask. I could cut something like what you've got there, but I don't see where it would fit on a keyboard! Maybe a 'stache to the left, and then the text to the right? That could work. A flocked sticker should be possible, though. Just make a square and then silk-screen the adhesive down, then flock.
What size are these?
What size are these?
6.25 Universals -- they fit my Ducky perfectly.
What size are these?
6.25 Universals -- they fit my Ducky perfectly.
I've sent out a batch of these guys to Boiler, and we'll see if we can sell them or not. I'm thinking of calling them....
PLuSHcaps and PLuSHbars.
:blank:
Every PLUSHbar and PLUSHcap comes complete with a smoking jacket and a brandy snifter. (brandy not included)
:eek:
sMoOtH Operators
(Krog stops idly spinning his brandy snifter, and let's his monocle drop.)
... I like it! This entitles you to a color customized spacebar (right is transferable).
Quote from: Krog^^ Is that still good?? I'll take one :PsMoOtH Operators(Krog stops idly spinning his brandy snifter, and let's his monocle drop.)
... I like it! This entitles you to a color customized spacebar (right is transferable).
Quote from: RayQuote from: Krog^^ Is that still good?? I'll take one :psMoOtH Operators(Krog stops idly spinning his brandy snifter, and let's his monocle drop.)
... I like it! This entitles you to a color customized spacebar (right is transferable).
You got it. I'll put this one in the mail. :thumb:
Shipped it. I also tossed in a sage flocked Esc key.
Krog if these are yours (http://techkeys.us/collections/artisan/products/flocked-keycaps?utm_source=getresponse&utm_medium=email&utm_campaign=techkeys&utm_content=Bring+Romance+Back+to+the+Keyboard), congratulations are in order!
Just saw that e-mail and immediately thought of Krog! Congratulations :thumb: :thumb: :thumb:
Krog if these are yours (http://techkeys.us/collections/artisan/products/flocked-keycaps?utm_source=getresponse&utm_medium=email&utm_campaign=techkeys&utm_content=Bring+Romance+Back+to+the+Keyboard), congratulations are in order!
They are and CONGRATS!
Just saw that e-mail and immediately thought of Krog! Congratulations :thumb: :thumb: :thumb:
This is freaking awesome. These would look great on my Model F.
Just saw that e-mail and immediately thought of Krog! Congratulations :thumb: :thumb: :thumb:
Email! What I signed up for the mailing list but didn't see this.
Guess I need to check again.
Congrats krog!
PS: what happened to calling them smooth operators haha!
Also, a photo showing the Mint and Minty-Black BS spacebars (on sale now at techkeys) -- the Minty-Black was my favorite of the bunch.
(Attachment Link)
These look great. I want to rub my face and other body parts in them.
These look great. I want to rub my face and other body parts in them.
Also, a photo showing the Mint and Minty-Black BS spacebars (on sale now at techkeys) -- the Minty-Black was my favorite of the bunch.
(Attachment Link)
Patiently waiting for my orange :))
*twiddles thumb*
These are AMAZING. Now we just need flocked caps for BS.
These are AMAZING. Now we just need flocked caps for BS.
These are AMAZING. Now we just need flocked caps for BS.These are AMAZING. Now we just need flocked caps for BS.
http://techkeys.us/collections/artisan/products/flocked-keycaps (http://techkeys.us/collections/artisan/products/flocked-keycaps)
Most of them are :p
These are AMAZING. Now we just need flocked caps for BS.These are AMAZING. Now we just need flocked caps for BS.
http://techkeys.us/collections/artisan/products/flocked-keycaps (http://techkeys.us/collections/artisan/products/flocked-keycaps)
Most of them are :p
Yeah, the majority are BS. (Wait, that came out wrong.)
Ray, your spacebar and singleton should arrive today. Feedback, please!
I'm really liking having a flocked spacebar!!
I think I'd use an entire keyboard full of flocked keys actually :eek:
But I do think the stabilizers on this ducky are little off kilter because not all spacebars that should fit do fit. This one barely did!
I'm really liking having a flocked spacebar!!
I think I'd use an entire keyboard full of flocked keys actually :eek:
But I do think the stabilizers on this ducky are little off kilter because not all spacebars that should fit do fit. This one barely did!
Glad you're enjoying it! :thumb: Any issues with the mods to the left or right of the spacebar?
This is freaking awesome. These would look great on my Model F.
So have I mentioned how much I like this flocked space bar.
I'm really wondering what the deal is because I swear it's even quieter to.
Maybe it's all a placebo.
So have I mentioned how much I like this flocked space bar.
I'm really wondering what the deal is because I swear it's even quieter to.
Maybe it's all a placebo.
You do touch the flocked spacebar once in a while, don't you? I don't mean actuate it (pressing it down), I mean touch it.
I'm making you uncomfortable, aren't I? :thumb:
Up next -- MX spacebars, orange flocking on white.
Up next -- MX spacebars, orange flocking on white.
WHOOOOOOPIE!
But no BS? :(
Hey, Ray, how's that spacebar holding up? My MX is showing some wear on the leading edge. The top is still fluffy, but it seems that on the leading edge there is some loss (or flattening) of the flock. You experiencing anything similar? I will post a photo soon.
I know it sounds gross, but to me it's cool, I like to think of the green as mold haha :P
I know it sounds gross, but to me it's cool, I like to think of the green as mold haha :P
The spacebar is very comfy, it's weird and I like it!
Oddly enough I still think it is quieter, perhaps it just the type of space bar or the fit, I dunno.
Meh.
(Attachment Link) (Attachment Link)
Flocked some spacebars (one aluminum) and one is a white Universal. Coverage was not great. I'm going to wait for Friday, when the weather will not be so bone-numbingly cold. The metal spacebar actually was flocked twice. The first time I got clumped flock on it (invented some new obscenities in the process) and the whole thing had to be dropped into some solvent to clear it off and try again.
What do you mean meh? That looks awesome! :thumb:
Here's one of the orange rayon flocked spacebars on my Ducky:
(Attachment Link) (Attachment Link)
And this morning I flocked white nylon (slightly longer fibers) to see if there's a better "pile" on them.
(Attachment Link) (Attachment Link)
Have I mentioned how insanely cool I think flocked key caps are!
Have I mentioned how insanely cool I think flocked key caps are!
Thank you, sir.
How's the ganja cap? :p
(Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link)
That cap reminds me of Christmas time.
OMG these caps look sooooo awesome! Great job!
Yeah i saw them since day one on the website and i follow this thread since day one too. Sadly the total cost of the caps (+shipping) is way out of my range but i support you and i wish you good luck with this!OMG these caps look sooooo awesome! Great job!
Thanks! There are a limited number of BS spacebars available on techkeys.us -- also some MX stuff, single unit keys. I'm really, really liking the nylon. I'm doing a big run of these on Friday (warmest day this week remaining in NYC) and letting them cure over the weekend. :thumb:
(Attachment Link) (Attachment Link)
That cap reminds me of Christmas time.
Thanks! I'm not sure how it looks on your monitor, but it's not as brilliant a white as seen in the photos. It's got a creamier sort of color.
Krog any thoughts on flocking fibers getting into switches?
Krog...I...errr...misplaced that key I was going to send you to flock for me...when I find it I'll let you know.
Good to know! I've been using mine for a few months now and there is a little dirt accumulation on the left side where my left thumb hits it...I was actually kinda liking the discoloration, but I might try this out.
I can't say enough how much I love a fuzzy spacebar under my thumb!