Author Topic: Keycaps made with Pottery Clay  (Read 1272 times)

0 Members and 1 Guest are viewing this topic.

Online ju6ju8Oo

  • Thread Starter
  • Posts: 56
  • Location: Kyoto, Japan
Keycaps made with Pottery Clay
« on: Sun, 18 March 2018, 10:15:00 »
Keycaps made with Pottery Clay, anyone tried?

Offline jmg123

  • Posts: 5
  • Location: UK
Re: Keycaps made with Pottery Clay
« Reply #1 on: Mon, 19 March 2018, 13:52:58 »
No, but i do make quite a bit with clay. The problem i forsee is the uneven 5 to to 10% shrinkage you get when firing. It would probably be best to make a large enough hole on the underside of the ceramic key to be able to take a stem cut off a plastic key. That way you could glue the plastic stem into the ceramic key and make sure you get a good fit to the switch.

Online ju6ju8Oo

  • Thread Starter
  • Posts: 56
  • Location: Kyoto, Japan
Re: Keycaps made with Pottery Clay
« Reply #2 on: Tue, 20 March 2018, 21:06:12 »
a plastic stem sounds like a good plan!

Offline keylabskeycaps

  • Posts: 25
  • Location: Middle Earth
  • KeyLabs Artisans
    • keyLabsKeycaps
Re: Keycaps made with Pottery Clay
« Reply #3 on: Sun, 08 April 2018, 18:15:00 »
I haven't personally tried that, I use super sculpy medium for all the stuff I work on. I think pottery clay would run into a bunch of issues with detailing and drying out and everything. It might be worth a try, but it could end up just being a pain.
Code WASD v2 / Cherry MX
K Type / Cherry MX

Offline Thereminz

  • Posts: 11
Re: Keycaps made with Pottery Clay
« Reply #4 on: Sun, 15 April 2018, 11:20:51 »
No, but i do make quite a bit with clay. The problem i forsee is the uneven 5 to to 10% shrinkage you get when firing. It would probably be best to make a large enough hole on the underside of the ceramic key to be able to take a stem cut off a plastic key. That way you could glue the plastic stem into the ceramic key and make sure you get a good fit to the switch.

Wouldn't the plastic melt in the kiln

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 20564
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Keycaps made with Pottery Clay
« Reply #5 on: Mon, 16 April 2018, 21:44:41 »
No, but i do make quite a bit with clay. The problem i forsee is the uneven 5 to to 10% shrinkage you get when firing. It would probably be best to make a large enough hole on the underside of the ceramic key to be able to take a stem cut off a plastic key. That way you could glue the plastic stem into the ceramic key and make sure you get a good fit to the switch.

Wouldn't the plastic melt in the kiln

I suspect the idea is to fire the keycap first, and glue the stem in when it has cooled.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But thatís incorrect. Itís in HHKBís slogan, but when Americaís cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Online HPE1000

  • Keycap Paparazzo
  • Posts: 2678
  • Location: Carolina Beach, NC
Re: Keycaps made with Pottery Clay
« Reply #6 on: Mon, 16 April 2018, 22:26:54 »
I seem to remember a thread a few years ago where someone said they attempted it and their keycap exploded in the kiln and destroyed a bunch of peoples stuff so they gave up.

Online Blaise170

  • * Esteemed Elder
  • Posts: 1054
  • Location: Boston, MA
  • ALPS キーボード
    • XYZ
Re: Keycaps made with Pottery Clay
« Reply #7 on: Tue, 17 April 2018, 09:00:14 »
I seem to remember a thread a few years ago where someone said they attempted it and their keycap exploded in the kiln and destroyed a bunch of peoples stuff so they gave up.

lmao
I proxy anything, including keyboards (キーボード / 鍵盤), from both Japan (日本) and China (中國)!

View my current and past keyboards here: https://deskthority.net/wiki/User:Blaise170