Author Topic: [GB]TGR Tris/Tris CE numpad 65% Shipped (Read 67204 times)

LDobler · « **Reply #50 on:** Tue, 13 December 2016, 14:32:10 »

Pm'd about color change.

yuktsi · « **Reply #51 on:** Wed, 21 December 2016, 09:35:53 »

The order list has been updated to the second post of the thread. Material been purchased for 40 units. All PMs have been replied, invoices were all out.

Sorry for the lack of updates. Been caught with the progress of 910, TX and all the end of the year matters. Cheers.

ctrlX · « **Reply #52 on:** Wed, 04 January 2017, 07:13:08 »

Need to let go of my spot on this one. Willing to take a small loss if the transaction is quick.

Black case (top and bottom). Grey plate.

Cheers!

Panzerhawx · « **Reply #53 on:** Thu, 26 January 2017, 11:27:15 »

Quote from: ctrlX on Wed, 04 January 2017, 07:13:08

Need to let go of my spot on this one. Willing to take a small loss if the transaction is quick.

Black case (top and bottom). Grey plate.

Cheers!

Willing to take your spot...if yutski is still taking colour changes?

ctrlX · « **Reply #54 on:** Thu, 26 January 2017, 13:10:03 »

You will have to ask him. Maybe you will have more luck. My PM to him has not yet been answered.

yuktsi · « **Reply #55 on:** Thu, 26 January 2017, 21:47:30 »

Quote from: Panzerhawx on Thu, 26 January 2017, 11:27:15

Quote from: ctrlX on Wed, 04 January 2017, 07:13:08
Need to let go of my spot on this one. Willing to take a small loss if the transaction is quick.

Black case (top and bottom). Grey plate.

Cheers!

Willing to take your spot...if yutski is still taking colour changes?

yes. Color change is still possible

ctrlX · « **Reply #56 on:** Fri, 27 January 2017, 01:06:30 »

Quote from: yuktsi on Thu, 26 January 2017, 21:47:30

Quote from: Panzerhawx on Thu, 26 January 2017, 11:27:15
Quote from: ctrlX on Wed, 04 January 2017, 07:13:08
Need to let go of my spot on this one. Willing to take a small loss if the transaction is quick.

Black case (top and bottom). Grey plate.

Cheers!

Willing to take your spot...if yutski is still taking colour changes?
yes. Color change is still possible

Thanks yuktsi!

Might as well ask if shipping cost was included in the invoice that was sent out? Just wondering as it wasn't specified.

yuktsi · « **Reply #57 on:** Fri, 27 January 2017, 03:57:28 »

I haven't invoiced the shipping yet.

ctrlX · « **Reply #58 on:** Mon, 13 February 2017, 12:17:55 »

Quote from: yuktsi on Fri, 27 January 2017, 03:57:28

I haven't invoiced the shipping yet.

FYI. Sent you a PM some time ago.

Sent from my Nexus 5X using Tapatalk

LDobler · « **Reply #59 on:** Sat, 04 March 2017, 08:07:21 »

Any updates?

laughatpain · « **Reply #60 on:** Thu, 09 March 2017, 18:36:53 »

Is the expected timeline the same as the expected timeline for the 910 after the anodizing delays?

iArson · « **Reply #61 on:** Thu, 16 March 2017, 10:53:37 »

Are there any updates on this? I believe the estimated timeframe was the middle of last month.

yuktsi · « **Reply #62 on:** Thu, 16 March 2017, 13:23:03 »

Hello guys, so sorry for the long delays and lack of updates. I just dropped off the 910 for anodising yesterday. Machining for TRIS is still in progress, do expect another 4 weeks before delivery. I will have some photos shared here once the machining is almost done.

sairex · « **Reply #63 on:** Thu, 16 March 2017, 13:39:28 »

Thanks for the update, yuktsi!

Slash Emperor · « **Reply #64 on:** Thu, 16 March 2017, 13:41:59 »

Quote from: yuktsi on Thu, 16 March 2017, 13:23:03

Hello guys, so sorry for the long delays and lack of updates. I just dropped off the 910 for anodising yesterday. Machining for TRIS is still in progress, do expect another 4 weeks before delivery. I will have some photos shared here once the machining is almost done.

I think I forgot to ask this earlier, but if we're in for both, can we have them shipped together?

yuktsi · « **Reply #65 on:** Thu, 16 March 2017, 21:40:24 »

Quote from: Slash Emperor on Thu, 16 March 2017, 13:41:59

Quote from: yuktsi on Thu, 16 March 2017, 13:23:03
Hello guys, so sorry for the long delays and lack of updates. I just dropped off the 910 for anodising yesterday. Machining for TRIS is still in progress, do expect another 4 weeks before delivery. I will have some photos shared here once the machining is almost done.

I think I forgot to ask this earlier, but if we're in for both, can we have them shipped together?

I am afraid I can't accommodate both in the box that I've prepared. Because the foams are rather thick.
Will see what I can do when the 910 are ready.

Thank you.

romevi · « **Reply #66 on:** Thu, 16 March 2017, 21:56:54 »

Quote from: yuktsi on Thu, 16 March 2017, 21:40:24

Quote from: Slash Emperor on Thu, 16 March 2017, 13:41:59
Quote from: yuktsi on Thu, 16 March 2017, 13:23:03
Hello guys, so sorry for the long delays and lack of updates. I just dropped off the 910 for anodising yesterday. Machining for TRIS is still in progress, do expect another 4 weeks before delivery. I will have some photos shared here once the machining is almost done.

I think I forgot to ask this earlier, but if we're in for both, can we have them shipped together?
I am afraid I can't accommodate both in the box that I've prepared. Because the foams are rather thick.
Will see what I can do when the 910 are ready.

Thank you.

Slash Emperor · « **Reply #67 on:** Fri, 17 March 2017, 05:18:47 »

Quote from: yuktsi on Thu, 16 March 2017, 21:40:24

Quote from: Slash Emperor on Thu, 16 March 2017, 13:41:59
Quote from: yuktsi on Thu, 16 March 2017, 13:23:03
Hello guys, so sorry for the long delays and lack of updates. I just dropped off the 910 for anodising yesterday. Machining for TRIS is still in progress, do expect another 4 weeks before delivery. I will have some photos shared here once the machining is almost done.

I think I forgot to ask this earlier, but if we're in for both, can we have them shipped together?
I am afraid I can't accommodate both in the box that I've prepared. Because the foams are rather thick.
Will see what I can do when the 910 are ready.

Thank you.

Sounds good. I was just wondering, so I could try to cut down on shipping costs. If I can't have them shipped together, that's okay, just means that the 910 will be in before the Tris.

iArson · « **Reply #68 on:** Fri, 14 April 2017, 10:36:54 »

Hey are there any update?

Sent from my iPhone using Tapatalk

yuktsi · « **Reply #69 on:** Sat, 15 April 2017, 00:15:43 »

Quote from: iArson on Fri, 14 April 2017, 10:36:54

Hey are there any update?

Sent from my iPhone using Tapatalk

The machining of Tris is done. I should be able to snap some photos on the coming Tuesday before sending them for anodizing. Cheers.

iArson · « **Reply #70 on:** Mon, 17 April 2017, 17:03:58 »

Quote from: yuktsi on Sat, 15 April 2017, 00:15:43

Quote from: iArson on Fri, 14 April 2017, 10:36:54
Hey are there any update?

Sent from my iPhone using Tapatalk
The machining of Tris is done. I should be able to snap some photos on the coming Tuesday before sending them for anodizing. Cheers.

Thank you for the update! Can't wait

LDobler · « **Reply #71 on:** Mon, 17 April 2017, 17:07:07 »

Quote from: yuktsi on Sat, 15 April 2017, 00:15:43

Quote from: iArson on Fri, 14 April 2017, 10:36:54
Hey are there any update?

Sent from my iPhone using Tapatalk
The machining of Tris is done. I should be able to snap some photos on the coming Tuesday before sending them for anodizing. Cheers.

Thanks for the update!

By the way... What is the TGR Alice? :O

iArson · « **Reply #72 on:** Mon, 17 April 2017, 17:07:40 »

Quote from: LDobler on Mon, 17 April 2017, 17:07:07

Quote from: yuktsi on Sat, 15 April 2017, 00:15:43
Quote from: iArson on Fri, 14 April 2017, 10:36:54
Hey are there any update?

Sent from my iPhone using Tapatalk
The machining of Tris is done. I should be able to snap some photos on the coming Tuesday before sending them for anodizing. Cheers.

Thanks for the update!

By the way... What is the TGR Alice? :O

My wallet is ready.

Sent from my iPhone using Tapatalk

LDobler · « **Reply #73 on:** Mon, 17 April 2017, 17:10:01 »

Quote from: iArson on Mon, 17 April 2017, 17:07:40

Quote from: LDobler on Mon, 17 April 2017, 17:07:07
Quote from: yuktsi on Sat, 15 April 2017, 00:15:43
Quote from: iArson on Fri, 14 April 2017, 10:36:54
Hey are there any update?

Sent from my iPhone using Tapatalk
The machining of Tris is done. I should be able to snap some photos on the coming Tuesday before sending them for anodizing. Cheers.

Thanks for the update!

By the way... What is the TGR Alice? :O

My wallet is ready.

Sent from my iPhone using Tapatalk

I hope my wallet is ready when/if there is a GB for it

romevi · « **Reply #74 on:** Mon, 17 April 2017, 21:11:42 »

Quote from: LDobler on Mon, 17 April 2017, 17:07:07

By the way... What is the TGR Alice? :O

Good eye!

yuktsi · « **Reply #75 on:** Wed, 19 April 2017, 22:46:18 »

Quote from: LDobler on Mon, 17 April 2017, 17:07:07

Quote from: yuktsi on Sat, 15 April 2017, 00:15:43
Quote from: iArson on Fri, 14 April 2017, 10:36:54
Hey are there any update?

Sent from my iPhone using Tapatalk
The machining of Tris is done. I should be able to snap some photos on the coming Tuesday before sending them for anodizing. Cheers.

Thanks for the update!

By the way... What is the TGR Alice? :O

You mean this? Still long way to go, I need to deliver all the Tris and 910 first.
Maybe in late May or June after my exams. Still got the design the PCB myself, quadcube and leeku are kinda busy right now

romevi · « **Reply #76 on:** Wed, 19 April 2017, 22:59:36 »

So long as there's blue I'm in.

Jedi · « **Reply #77 on:** Thu, 20 April 2017, 08:15:19 »

Woah, 10 seconds. That's some fast reflexes.

chilldude_22 · « **Reply #78 on:** Thu, 27 April 2017, 15:44:21 »

Looking to offload my order. R1/ Silver top/silver bottom/red plate.

Minha · « **Reply #79 on:** Sun, 07 May 2017, 02:10:21 »

Quote from: chilldude_22 on Thu, 27 April 2017, 15:44:21

Looking to offload my order. R1/ Silver top/silver bottom/red plate.

Still available?

Dreamre · « **Reply #80 on:** Sun, 07 May 2017, 23:28:17 »

Any updates?

chilldude_22 · « **Reply #81 on:** Mon, 08 May 2017, 01:04:20 »

Quote from: Minha on Sun, 07 May 2017, 02:10:21

Quote from: chilldude_22 on Thu, 27 April 2017, 15:44:21
Looking to offload my order. R1/ Silver top/silver bottom/red plate.
Still available?

Yes, still available.

laughatpain · « **Reply #82 on:** Mon, 15 May 2017, 17:56:50 »

Is this on the same timeline as TGR-910? If its a bit delayed, I may need to revise my shipping address.

yuktsi · « **Reply #83 on:** Mon, 15 May 2017, 20:10:17 »

Quote from: laughatpain on Mon, 15 May 2017, 17:56:50

Is this on the same timeline as TGR-910? If its a bit delayed, I may need to revise my shipping address.

They are still in the process of anodizing. It will be a little later than the 910 (mid June probably).
You may pm me your shipping. Thank you.

chilldude_22 · « **Reply #84 on:** Tue, 30 May 2017, 09:40:13 »

Minha has paid for and agreed to take over my spot.

DanB · « **Reply #85 on:** Fri, 09 June 2017, 21:57:56 »

Depending on when this is done, I might need you to wait a week or two before shipping. Is that okay?

yuktsi · « **Reply #86 on:** Mon, 12 June 2017, 21:03:01 »

Quote from: DanB on Fri, 09 June 2017, 21:57:56

Depending on when this is done, I might need you to wait a week or two before shipping. Is that okay?

okay

m1kehonch0 · « **Reply #87 on:** Wed, 14 June 2017, 23:16:14 »

Hey Yuktsi, I know it's late to be asking but any chance to modify color selection or is it too late? PM me if you need to. Thanks!

Sent from my iPhone using Tapatalk

NoChance · « **Reply #88 on:** Wed, 28 June 2017, 23:37:17 »

I can feel we're getting close!

yuktsi · « **Reply #89 on:** Thu, 29 June 2017, 11:24:24 »

Quote from: m1kehonch0 on Wed, 14 June 2017, 23:16:14

Hey Yuktsi, I know it's late to be asking but any chance to modify color selection or is it too late? PM me if you need to. Thanks!

Sent from my iPhone using Tapatalk

Sorry bro, I am afraid color change is no longer possible. The parts are already with the anodizing place.

m1kehonch0 · « **Reply #90 on:** Thu, 29 June 2017, 11:27:48 »

Quote from: yuktsi on Thu, 29 June 2017, 11:24:24

Quote from: m1kehonch0 on Wed, 14 June 2017, 23:16:14
Hey Yuktsi, I know it's late to be asking but any chance to modify color selection or is it too late? PM me if you need to. Thanks!

Sent from my iPhone using Tapatalk
Sorry bro, I am afraid color change is no longer possible. The parts are already with the anodizing place.

No problem, I probably should have messaged you on Slack instead of Geekhack... Cant wait to get it! Thanks

laughatpain · « **Reply #91 on:** Sun, 09 July 2017, 14:13:34 »

~~No longer have my Jane CE, if anyone is interested in my order feel free to PM me. You can find the exact details on the order sheet.~~

Transfered

romevi · « **Reply #92 on:** Mon, 10 July 2017, 10:15:54 »

Quote from: laughatpain on Sun, 09 July 2017, 14:13:34

No longer have my Jane CE

laughatpain · « **Reply #93 on:** Mon, 10 July 2017, 11:39:16 »

Quote from: romevi on Mon, 10 July 2017, 10:15:54

Quote from: laughatpain on Sun, 09 July 2017, 14:13:34
No longer have my Jane CE

Tis a sad day indeed, hopefully i move on to different things :thinking:

sairex · « **Reply #94 on:** Tue, 11 July 2017, 15:26:41 »

Are there any updates? Maybe a photo or two now that 910 is shipping out? TIA!

sairex · « **Reply #95 on:** Tue, 18 July 2017, 13:06:04 »

No updates?

yuktsi · « **Reply #96 on:** Wed, 19 July 2017, 11:03:07 »

Quote from: sairex on Tue, 11 July 2017, 15:26:41

Are there any updates? Maybe a photo or two now that 910 is shipping out? TIA!

Sorry for the long delay. Unfortunately, the aluminum housing is still stuck at the anodizing factory. The quantity for the color housing (sky blue, purple and pink) is too little they are not willing to stop their existing production to setup for such low quantity. I am urging them to finish the black/gray/silver parts asap so that I can start shipping. I realized I didn't have any photos snapped for the un-anodized housing, but here's some for the PCB and the brass.

romevi · « **Reply #97 on:** Wed, 19 July 2017, 11:05:23 »

Quote from: yuktsi on Wed, 19 July 2017, 11:03:07

Quote from: sairex on Tue, 11 July 2017, 15:26:41
Are there any updates? Maybe a photo or two now that 910 is shipping out? TIA!
Sorry for the long delay. Unfortunately, the aluminum housing is still stuck at the anodizing factory. The quantity for the color housing (sky blue, purple and pink) is too little they are not willing to stop their existing production to setup for such low quantity. I am urging them to finish the black/gray/silver parts asap so that I can start shipping. I realized I didn't have any photos snapped for the un-anodized housing, but here's some for the PCB and the brass.

Show Image

Show Image

Show Image

That weight looks awesome!

le_wraith · « **Reply #98 on:** Wed, 19 July 2017, 12:31:09 »

Looking to offload my black top/pink bottom because it looks like there won't be another run of TGR 910 (yuktsi, unless I am missing something?) and so I won't have anything to match it. PM me if interested.

DanB · « **Reply #99 on:** Wed, 19 July 2017, 12:32:33 »

Unfortunately, I am thinking of selling tris (black black) with a matching black tgr jane to fund a different board.

PM if interested

News:

Author Topic: [GB]TGR Tris/Tris CE numpad 65% Shipped (Read 67204 times)