Price Check- What's it Worth?

[klennkellon]

I paid $60 (free shipping) for a dusty but intact grey logo Model M, was it a good deal?

I scoured the dozens of thrift shops in my cities but only found rubber domes (and some electric typewriters!)

[riotonthebay]

I paid $60 (free shipping) for a dusty but intact grey logo Model M, was it a good deal?

I scoured the dozens of thrift shops in my cities but only found rubber domes (and some electric typewriters!)

If it's only dusty but otherwise in very good condition, that's a fine price. Is it the square logo or the oval logo? If square, it's an even better deal.

[klennkellon]

I paid $60 (free shipping) for a dusty but intact grey logo Model M, was it a good deal?

I scoured the dozens of thrift shops in my cities but only found rubber domes (and some electric typewriters!)

If it's only dusty but otherwise in very good condition, that's a fine price. Is it the square logo or the oval logo? If square, it's an even better deal.

oval logo, made September 17th 1987.

[bocahgundul]

Digilog case?

[alexjd99]

Orange topre brototype zombro?

[fohat.digs]

oval logo, made September 17th 1987.

Crack it open and give it a good cleaning. At that date, there is still a good chance that it has the heavy plate.

$60 shipped was a very good price.

[klennkellon]

oval logo, made September 17th 1987.

Crack it open and give it a good cleaning. At that date, there is still a good chance that it has the heavy plate.

$60 shipped was a very good price.

I have to order the nut driver for it, but yeah I'll do that.

I'm pretty sure it needs a bolt mod, the -key on the numpad only works if I hammer it down. All of the other keys on the board work just fine, though.

In a few months, I may send it to Phosphor, I don't do DIY cause it always goes badly.

[itzmeluigi]

How much do 100 vintage MX blacks go for?

[bocahgundul]

How much do 100 vintage MX blacks go for?

35$

[LiquidEvilGaming]

So while i usually do not sell online anymore i'd venture to trust this forum more than i would selling on certain other wesbites, so as soon as my google payment account is fully setup i have a few boards i'll likely be offloading and curious as to peoples thoughts on value.  Bearing in mind just the items value and not taking shipping into account (though when/if i do list them it will be US only)

Forgive the little piece of paper with dates in each photo as i had thought about putting them on Cl but lately my luck there has been ****.

Keyboard #1

 kul.jpg (1432.1 kB. 3264x2448 - viewed 142 times.)

KUL 87 es TKL w/ Mx browns,orig box,ducky bi color blue/grey dyesub pbt keycaps and blue top case replacement (coiled cable not included)

Keyboard #2

 ganss 2.jpg (599.28 kB. 3264x2448 - viewed 93 times.)

Ganss G.S 87 TKL w/ mx browns,orig box,non removable cable, midnight doubleshot dcs keycaps from signature plastics

Keyboard #3

 ganss.jpg (1200.3 kB. 3264x2448 - viewed 93 times.)

Ganss G.S 87 TKL w/ mx reds,orig box,non removable cable, originative ABS doubleshot carbon black keycaps

Keyboard #4

 tesoro.jpg (1152.3 kB. 3264x2448 - viewed 96 times.)

Tesoro tizona Elite TKL full color backlit keyboard w/ kailh browns,orig box,geekkeys side printed grey PBT keycaps


Curious the community thoughts on value on each before i decide to sell one/all of them in the near future.


Cheers!

[cmd]

Hi everyone, would anyone happen to know how to price the leopold's fc660c stoke keycaps? I have someone interested in buying them and I have no idea what to sell them for?

[alexjd99]

Hi everyone, would anyone happen to know how to price the leopold's fc660c stoke keycaps? I have someone interested in buying them and I have no idea what to sell them for?

HHKB keycaps go for around $65-70 IIRC, so I'd say Leopold would be around there, maybe a bit cheaper

[LiquidEvilGaming]

Hi everyone, would anyone happen to know how to price the leopold's fc660c stoke keycaps? I have someone interested in buying them and I have no idea what to sell them for?

HHKB keycaps go for around $65-70 IIRC, so I'd say Leopold would be around there, maybe a bit cheaper

Isn't there both a dyesub and lasered version of the fc660c keycaps?  I'd guess the lasered ones are not worth nearly as much if it happens to be those.

[cmd]

Hi everyone, would anyone happen to know how to price the leopold's fc660c stoke keycaps? I have someone interested in buying them and I have no idea what to sell them for?

HHKB keycaps go for around $65-70 IIRC, so I'd say Leopold would be around there, maybe a bit cheaper

Isn't there both a dyesub and lasered version of the fc660c keycaps?  I'd guess the lasered ones are not worth nearly as much if it happens to be those.

They are dyesub! Yeah I actually just thought about that after posting on there. I had though PFU sold keysets. Awesome stuff guys I appreciate it.

[Bromono]

Will possibly need to liquidate some stuff to fund a trip and want to get some prices.

What are fair prices for these.

I don't believe in hyper inflated clack prices but do realize they are worth more then $50

F2 Blue Topre
Nebulit 420
Weedioactive 420
Replica Hammer 60% case (Silver)
HHKB with silenced MX stems (Holes had to be drilled for stabalizers)

[Signature]

Will possibly need to liquidate some stuff to fund a trip and want to get some prices.

What are fair prices for these.

I don't believe in hyper inflated clack prices but do realize they are worth more then $50

F2 Blue Topre
Nebulit 420
Weedioactive 420
Replica Hammer 60% case (Silver)
HHKB with silenced MX stems (Holes had to be drilled for stabalizers)

retail.

f2 is probably 125 ish both 420's around 150 I'd believe Replica hammer 10 under retail, hhkb 50 over retail?

[rddm]

I'm selling some of my stuff.
How much worth for:
- g81-30XX SAD
- wyse terminal (vintage mx blacks)
- OG cherry abs doubleshots classic beige ISO-DE
- facew with acrylic plate and stickered lubed cherry mx clear with 62g 24k gold springs from Sprit, gold wires in the stabs and sip sockets?

[alienman82]

removed.

[klennkellon]

Is Phosphor Glow legit?

I have a slightly beat up model m missing a lot rivets, really do not want to do the job myself.

[bocahgundul]

Is Phosphor Glow legit?

I have a slightly beat up model m missing a lot rivets, really do not want to do the job myself.

Yep phosphor glow is 100% legit

I'm selling some of my stuff.
How much worth for:
- g81-30XX SAD
- wyse terminal (vintage mx blacks)
- OG cherry abs doubleshots classic beige ISO-DE
- facew with acrylic plate and stickered lubed cherry mx clear with 62g 24k gold springs from Sprit, gold wires in the stabs and sip sockets?

bocahgundal is looking for vintage blacks

Yea I'm searching for vintage mx blacks

[alh84001]

I paid $60 (free shipping) for a dusty but intact grey logo Model M, was it a good deal?

I scoured the dozens of thrift shops in my cities but only found rubber domes (and some electric typewriters!)

I paid the same some half a year ago. I didn't even know it was from 1987, since the sticker was missing, but when I opened it up, I saw on the controller that it is from June 1987 (if 2387 means 23rd week of 1987). Does your's have stabiliser wires on plus and endter keys on numpad?

[fohat.digs]

Is Phosphor Glow legit?

Phosphorglow is widely regarded as the premier Model M refurbisher.

[Jixr]

lipless silver 60% tex case, in like new condition.


retail is $120, I was thinking around $80-90 shipped?

[user 18]

lipless silver 60% tex case, in like new condition.


retail is $120, I was thinking around $80-90 shipped?

I'd say that's more than fair

[jerue]

lipless silver 60% tex case, in like new condition.


retail is $120, I was thinking around $80-90 shipped?

good price, I'd try to get 90 if possible.

[klennkellon]

I paid $60 (free shipping) for a dusty but intact grey logo Model M, was it a good deal?

I scoured the dozens of thrift shops in my cities but only found rubber domes (and some electric typewriters!)

I paid the same some half a year ago. I didn't even know it was from 1987, since the sticker was missing, but when I opened it up, I saw on the controller that it is from June 1987 (if 2387 means 23rd week of 1987). Does your's have stabiliser wires on plus and endter keys on numpad?

The spacebar, Numpad +, and Numpad Enter, all use wire stabs.

The backspace, shift keys, and enter key, all use the "barrel" type.

[Venatorious]

How much for an AEK with orange alps and yellowing?

How much for an Acer 6011 with blue alps?

[eurekastreet]

Filco Majestouch 2 OEM keycaps, qwerty ISO layout (see attached picture for the precise layout)

Since I'm an azerty user, I replaced those keycaps two days ago, now I'm thinking of selling them, as I'm probably never gonna use them anyway. Is it worth it trying to sell them, and at what price ?

[user 18]

Filco Majestouch 2 OEM keycaps, qwerty ISO layout (see attached picture for the precise layout)

Since I'm an azerty user, I replaced those keycaps two days ago, now I'm thinking of selling them, as I'm probably never gonna use them anyway. Is it worth it trying to sell them, and at what price ?

That's ANSI, not ISO.

Probably not worth trying to sell them, stock caps sell for maybe $5. My personal preference is to always hold onto stock caps, in case I ever want to sell the board.

[Venatorious]

How much for an AEK with with oranges?

Has all its keys a little yellowing

[khronokrator]

Anyone know about how much a Corsair K70 RGB with MX Blue switches would go for these days? I bought it a year ago before they went out of production, but have never really cared for MX Blues. It's spent the vast majority of its life in its box.

[klennkellon]

How much do I expect to spend to buy a 122 key Model F, not including the converter.

Condition won't matter much, as long as it works.

[appleonama]

ansi g80-5000? 7/10 condition?

[bocahgundul]

ansi g80-5000? 7/10 condition?

no box right? I would pay max 400 for used ANSI g80-5000

[appleonama]

ansi g80-5000? 7/10 condition?

no box right? I would pay max 400 for used ANSI g80-5000

well looks like I am going to purchase a 5k

[bocahgundul]

ansi g80-5000? 7/10 condition?

no box right? I would pay max 400 for used ANSI g80-5000

well looks like I am going to purchase a 5k

danq son congrats if you actually find the 5k

So hard to get 5k

[appleonama]

ansi g80-5000? 7/10 condition?

no box right? I would pay max 400 for used ANSI g80-5000

well looks like I am going to purchase a 5k

danq son congrats if you actually find the 5k

So hard to get 5k

I already have one on hold for me just confirming what a decent price I was thinking 350-450

[eurekastreet]

Sorry for the mistake. That will teach me to always put a picture of the product I'm selling and drink more coffee before I post anything online ;d And I guess I'll just stick to them then, thanks for the reply.

Filco Majestouch 2 OEM keycaps, qwerty ISO layout (see attached picture for the precise layout)

Since I'm an azerty user, I replaced those keycaps two days ago, now I'm thinking of selling them, as I'm probably never gonna use them anyway. Is it worth it trying to sell them, and at what price ?

That's ANSI, not ISO.

Probably not worth trying to sell them, stock caps sell for maybe $5. My personal preference is to always hold onto stock caps, in case I ever want to sell the board.

[bocahgundul]

ansi g80-5000? 7/10 condition?

no box right? I would pay max 400 for used ANSI g80-5000

well looks like I am going to purchase a 5k

danq son congrats if you actually find the 5k

So hard to get 5k

I already have one on hold for me just confirming what a decent price I was thinking 350-450

CONGRATS BRO! can you say the seller to take a pic of the serial? pretty please?

[TalkingTree]

How much for a Cherry G80-3000HFMDE NIB?

[Photekq]

How much for a Cherry G80-3000HFMDE NIB?

Show Image

Show Image

Show Image

Show Image

Probably 125-150EUR+. Really nice keyboard.

[TalkingTree]

How much for a Cherry G80-3000HFMDE NIB?

Show Image

Show Image

Show Image

Show Image

Probably 125-150EUR+. Really nice keyboard.

That much? Interesting.
Thanks sir.

[Photekq]

That much? Interesting.
Thanks sir.

Yes, as the winkeys are very rare and it's NIB. Also, the blues may be worth something to some.

[itzmeluigi]

Around how much is a Industrial Model M round label valued at in pretty much mint condition?

[radio_killah]

An assembled duck viper with clears and some leds.

[quochung1989]

An assembled duck viper with clears and some leds.

400$

[zulios]

Hi everyone,

I have these StarCraft keycaps and I wonder what they are worth. They  are ABS doubleshots made by SP ; from what I've understood they refuse to produce them anymore due to potential copyright issues, so there has only been one run.

http://imgur.com/a/8C9sb

[WNovizar]

JTK Stormtrooper and JTK WoB

[bocahgundul]

JTK Stormtrooper and JTK WoB

GB price

[jerue]

Some cherry stuff I am not sure what is worth:

NIB G80-3314 HAU

like new G80-3234 HQU - caps w/no shine, perfect case, box + manual.