Author Topic: Wanting some feedback on my project  (Read 1535 times)

0 Members and 2 Guests are viewing this topic.

Offline Spectre72

  • Thread Starter
  • Posts: 3
Wanting some feedback on my project
« on: Thu, 06 February 2025, 15:36:57 »
Hi, I suppose to preface this I'm very new to the world of keyboards, pretty much only got into them  (Actually I still haven't even bought a proper enthusiast board yet)

I'm currently in the process of designing a simple but hopefully good looking keyboard,
Keybard Layout is F12 TKL
Typing angle is 7.5 degrees with a front height of 18.5mm
Plate is Tadpole mount, planning on it to be PP, no flex cuts [Mostly cause I don't quite know how to do that properly yet]
Top and bottom are held together with magnets, as well as the weight currently though I might change that to being screw in
Haven't decided on if I should do silicone dots as feet or full length bars

it's not designed to take a daughter board however that may change, I'm fairly happy with the USB-C placement but I don't know if daughterboard + center USB placement would be better

I'd love to get some input from some other people on things I could try, add or adjust.

[ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ]

Offline Spectre72

  • Thread Starter
  • Posts: 3
Re: Wanting some feedback on my project
« Reply #1 on: Fri, 07 February 2025, 23:25:11 »
Update : Board model is fairly close to completion due to help from some more experienced individuals

Major changes :
Weight is now affixed with screws
There are now 2 designs, one that takes Hiney PCBs and one that will take the Geon Daughterboard
Certain Geometries are now simplified for ease of manufacturability

If anyone has any feedback, comments or concerns, do let me know. so far people have been very helpful in my learning process

312189-0
312191-1
312193-2
312195-3
312197-4

Offline Rob27shred

  • Posts: 1636
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: Wanting some feedback on my project
« Reply #2 on: Sun, 09 February 2025, 09:46:06 »
Looks good OP! Nice & simple TKL, I can definitely get behind that!

Offline Spectre72

  • Thread Starter
  • Posts: 3
Re: Wanting some feedback on my project
« Reply #3 on: Tue, 18 February 2025, 00:08:35 »
Went through 2 more redesigns as I wasn't entirely happy with how it looked, Figured if I'm gonna spend 350-400 bucks or so on a custom potentially one off board might as well make it something I love.
Weight is still plain without any engraving, still not sure if I want one or how one should look so for now it's blank.

312386-0
312388-1
312390-2
312392-3

Offline Leslieann

  • * Elevated Elder
  • Posts: 4553
Re: Wanting some feedback on my project
« Reply #4 on: Tue, 18 February 2025, 04:57:52 »
Looks good and not be a downer...

Are you making this yourself at work or having a friend do it?
I ask because your expectation of $350-400 is extremely low. If you're in the US and paying a shop this is probably closer to 3x that (or more), and you probably will not get it right the first, or possibly even the second time. And then you still need finish. The reason group buys get this price is because they already went through prototyping (you hope) and they're ordering in bulk, one-offs always cost a whole lot more.
Novelkeys NK65AE w/62g Zilents/39g springs
More
62g Zilents/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 magnetic cable, pic
| Filco MJ2 L.E. Vortex Case, Jailhouse Blues, heavily customized
More
Vortex case squared up/blasted finish removed/custom feet/paint/winkey blockoff plate, HID Liberator, stainless steel universal plate, 3d printed adapters, Type C, Netdot Gen10 magnetic cable, foam sound dampened, HK Gaming Thick PBT caps (o-ringed), Cherry Jailhouse Blues w/lubed/clipped Cherry light springs, 40g actuation
| GMMK TKL
More
w/ Kailh Purple Pros/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 Magnetic cable
| PF65 3d printed 65% w/LCD and hot swap
More
Box Jades, Interchangeable trim, mini lcd, QMK, underglow, HK Gaming Thick PBT caps, O-rings, Netdot Gen10 magnetic cable, in progress link
| Magicforce 68
More
MF68 pcb, Outemu Blues, in progress
| YMDK75 Jail Housed Gateron Blues
More
J-spacers, YMDK Thick PBT, O-rings, SIP sockets
| KBT Race S L.E.
More
Ergo Clears, custom WASD caps
| Das Pro
More
Costar model with browns
| GH60
More
Cherry Blacks, custom 3d printed case
| Logitech Illumininated | IBM Model M (x2)
Definitive Omron Guide. | 3d printed Keyboard FAQ/Discussion