Post by: RevoTeam on Fri, 26 August 2016, 07:25:33
After the long wait, we can finally start this GB. I am so exciting. I think we have a great IC(https://geekhack.org/index.php?topic=83590.0 )and we will have a great GB too.
Here are the final design:
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
[attachimg=6]
[attachimg=7]
Features:
Aluminum 6063t
CNC made cases
Anode
7 degree slope
Fully programmable
Full LED backlighting
NO ISO in the final design.
The kit will include:
Top case(wk or wkl)
Middle case
Bottom case
Plate(full or partial)
PCB
Logo D(made of alu and anode)
Cable (Can be upgraded)
Screws and rubber mat
Color option: black,silver,red,blue,gray,pink(for all the layer,plate,logo D)
[attachimg=8]
NOTES:
The cable will be fixed on PCB with xh2.54(no need of soldering,just plug-in like usb).The kit will include one cable.
Anyone want to upgrade the cable with YABRO PS2 is extra $10.
Payment method:
Paypal I will send invoice ASAP
GB will be end at 12th September.
Price:
The kit is $260
extra PC plate(moq is 10): $15
extra plate:$15
extra PCB:$25
Yarbo ps2 cable:$10
Your total price will be:kit+extra(if there any)+shipping+paypal fee
Shipping cost:
$35 each kit with tracking
the shipping cost may be higher if you order more extra stuff($5 every 500g)
lead time:
With in 90 days after GB
If you want join this GB,write the form below.Thanks
https://goo.gl/forms/AXCOtJOfho6S4yn52
Post by: RevoTeam on Fri, 26 August 2016, 07:26:07
Sorry to tell everyone that we have some delay in this GB.Due to the serious environmental problem here,all the anode factory have been shut down.
We have finished all the CNC progress,and all the keyboards are waiting for anodizing.
The good news is we are expecting to start anodizing within this week,that means i'll try my best to start shipping it before lunar new year(in this year it's 27 Jan).
However i can't make any promise right now, i apologize for any inconvenience because of this delay.Ill keep you guys updated.
[attachimg=5]
Post by: HTN47 on Sat, 27 August 2016, 19:21:31
Post by: smittysteve on Sat, 27 August 2016, 19:39:01
Post by: filphil on Sat, 27 August 2016, 19:47:58
(http://speedhunters-wp-production.s3.amazonaws.com/wp-content/uploads/2013/10/04080045/Minitokyo.Initial.D.270302.jpg)
Which only makes me want to buy it more... dammit!
Edit:
Saw the IC thread and there were others who thought the same. =D
Post by: Pemdas on Sat, 27 August 2016, 20:27:14
Post by: kokokoy on Sat, 27 August 2016, 20:32:34
Looks like an interesting board! Thinking about joining but was a little confused. On the form you have the color selection there but there are no options just a blank space. Are you doing any custom colors or is there a list of colors we can choose from somewhere?
Yeah that is missing. But on the IC colors were silver, black, red, blue, grey, pink and i believe thats available for the layers and logo.
Post by: nicx on Sat, 27 August 2016, 21:21:36
Post by: RevoTeam on Sat, 27 August 2016, 22:07:28
Looks like an interesting board! Thinking about joining but was a little confused. On the form you have the color selection there but there are no options just a blank space. Are you doing any custom colors or is there a list of colors we can choose from somewhere?
Sorry, i forget about color. i have put them in the thread. Thanks,man.
Post by: RevoTeam on Sat, 27 August 2016, 22:11:30
yep, you are so smart :thumb: :thumb: :thumb:Looks like an interesting board! Thinking about joining but was a little confused. On the form you have the color selection there but there are no options just a blank space. Are you doing any custom colors or is there a list of colors we can choose from somewhere?
Yeah that is missing. But on the IC colors were silver, black, red, blue, grey, pink and i believe thats available for the layers and logo.
Post by: kokokoy on Sat, 27 August 2016, 23:38:34
yep, you are so smart :thumb: :thumb: :thumb:Looks like an interesting board! Thinking about joining but was a little confused. On the form you have the color selection there but there are no options just a blank space. Are you doing any custom colors or is there a list of colors we can choose from somewhere?
Yeah that is missing. But on the IC colors were silver, black, red, blue, grey, pink and i believe thats available for the layers and logo.
That's not what my wife gonna say if she finds out I'm in. :)
Another thing though, you might want to add [GB] at the start of subject as this type of things get easily missed.
Post by: RevoTeam on Sun, 28 August 2016, 00:32:39
done. thank you for your supportyep, you are so smart :thumb: :thumb: :thumb:Looks like an interesting board! Thinking about joining but was a little confused. On the form you have the color selection there but there are no options just a blank space. Are you doing any custom colors or is there a list of colors we can choose from somewhere?
Yeah that is missing. But on the IC colors were silver, black, red, blue, grey, pink and i believe thats available for the layers and logo.
That's not what my wife gonna say if she finds out I'm in. :)
Another thing though, you might want to add [GB] at the start of subject as this type of things get easily missed.
Post by: wodan on Sun, 28 August 2016, 00:52:50
Post by: RevoTeam on Sun, 28 August 2016, 01:18:01
Phew no ISO! I can safely pass on this one ;)PCB no longer fit ISO, maybe next time!
Post by: T0mb3ry on Sun, 28 August 2016, 02:39:24
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
Post by: Pemdas on Sun, 28 August 2016, 03:02:17
Post by: RevoTeam on Sun, 28 August 2016, 03:24:54
Can we get extra middle parts and Ds in different colors?Yes,you can. I just need to figure out how much it would take. Let me get back to you. Thanks. :thumb:
Post by: RevoTeam on Sun, 28 August 2016, 03:53:17
I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
Post by: T0mb3ry on Sun, 28 August 2016, 03:59:34
I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.
Thanks for taking it into consideration. :thumb:
Post by: Photekq on Sun, 28 August 2016, 06:27:04
Do you have any photos of a winkey version? I'd just like to see how winkey sets look on this design, and I'm struggling to visualise it.
Does the PCB/plate support original Cherry 6.25 spacebars? The ones with off center stems.
Can you (on request) mark the value of the package as a lower amount on the customs form for international buyers?
Post by: RevoTeam on Sun, 28 August 2016, 06:38:07
Love the keyboard. I will most likely be ordering. I have a few questions :1, I don't have any pictures of winkey version at the moment. It's like g80-3000 winkey version and winkeyless version. I'll ask Dr.D to do a render if you still sturggling to visualise it.
Do you have any photos of a winkey version? I'd just like to see how winkey sets look on this design, and I'm struggling to visualise it.
Does the PCB/plate support original Cherry 6.25 spacebars? The ones with off center stems.
Can you (on request) mark the value of the package as a lower amount on the customs form for international buyers?
2,I think it support OG Cherry 6.25. The PCB is same with A87 so it should support that.
3,yes. i can claim whatever price you want.
Post by: joey on Sun, 28 August 2016, 06:58:09
Post by: RevoTeam on Sun, 28 August 2016, 07:02:58
Hope I can get the details sorted out on my PCB for this. Really want one!I'd love to sort that out. :thumb: :thumb: :thumb:
Post by: HTN47 on Sun, 28 August 2016, 14:24:20
Post by: RevoTeam on Sun, 28 August 2016, 19:07:16
Quick question about the PCB, does it come with resistors and diodes pre soldered?yes they're pre soldered
从我的 iPhone 发送，使用 Tapatalk
Post by: itzmeluigi on Sun, 28 August 2016, 19:31:40
Post by: RevoTeam on Sun, 28 August 2016, 19:34:20
Is it possible to order one without the D logo?yep,it is possible.you can chose no logo in the form. ;D
Post by: Data on Mon, 29 August 2016, 06:52:17
@Revo - It's probably too late but you might want to break up your address block in the Google form so you can collect city, state/province, postal code, and country separately from the street address. There's also no place for a name -- some areas won't deliver without a name in the destination address block. Just a heads up!
Post by: mathilda on Mon, 29 August 2016, 07:23:06
Post by: RevoTeam on Mon, 29 August 2016, 11:22:47
Ordered!Good call. I think i'll collect them later.ill need vaild phone number as well. Thank you for the advice.
@Revo - It's probably too late but you might want to break up your address block in the Google form so you can collect city, state/province, postal code, and country separately from the street address. There's also no place for a name -- some areas won't deliver without a name in the destination address block. Just a heads up!
Post by: RevoTeam on Mon, 29 August 2016, 11:59:46
What does the bottom case look like?I think i got i got a picture in the IC thread. ;D
Post by: T0mb3ry on Mon, 29 August 2016, 12:14:05
What does the bottom case look like?clean ;)
(https://geekhack.org/index.php?action=dlattach;topic=83590.0;attach=145135;image)
Post by: JDragon on Tue, 30 August 2016, 00:20:23
Post by: RevoTeam on Tue, 30 August 2016, 03:50:34
Definitely in on this, just can't decide on color. All of them look so good... maybe black outer, blue inner for GMK Hydro? Hoping for the possibility of adding in extra middle plates so I can swap out based on keyset.Extra middle case is definitely possible. But i am still waiting for factory to give me a price.You can order now,my guess is it'll be somewhere around $50. ;D
Post by: joey on Tue, 30 August 2016, 03:56:47
Extra middle case is definitely possible. But i am still waiting for factory to give me a price.You can order now,my guess is it'll be somewhere around $50. ;DGood and bad news :p
Post by: swimmingbird on Tue, 30 August 2016, 07:05:01
Any chance of a gold mid plate?
Post by: gandroider on Tue, 30 August 2016, 09:00:12
Post by: RevoTeam on Tue, 30 August 2016, 09:23:01
Looks fantasticWe never do the color of gold before. We got no sample of it. It may come out terrible.Maybe we'll add more color. But the colors we have at the moment are really great.
Any chance of a gold mid plate?
So,please consider the colors we have right now.If that doesn't please you,PM me. Maybe we can work something out. After all it's custom keyboard,it should go with the way you like ;D
Post by: RevoTeam on Tue, 30 August 2016, 09:27:10
I wish there will be a custom fullsized board like this.... :thumb: :thumb:Hope we can do full-size custom one day... :D
Post by: Manchias on Tue, 30 August 2016, 09:31:19
Post by: RevoTeam on Tue, 30 August 2016, 10:00:55
I would love to know more about the pcb before place my order. The pcb was designed and will be produced by you ? In case after along time using, your pcb have problem, can I just simply get a A87 replace for it ?Yep, you can simply replace it with a A87 pcb. PCB will be produced by me but it's not designed by our team. And i can say the PCB have good quality,and will be tested before shipping. It won't easily broken.
Post by: DALExSNAIL on Tue, 30 August 2016, 10:04:11
Post by: RevoTeam on Tue, 30 August 2016, 10:06:33
So if ordering now, I'd get invoiced on the 12th?I am working on that. I can send on 12th if you like ;D
Post by: DALExSNAIL on Tue, 30 August 2016, 10:08:10
So if ordering now, I'd get invoiced on the 12th?I am working on that. I can send on 12th if you like ;D
Well I was asking because I get paid on the 15th, so if invoices are going out a little after the 12th it'd be even better
Post by: RevoTeam on Tue, 30 August 2016, 10:23:47
Then pay on 15th. It's no problem at all. Or you can put down a deposit and pay the rest later. I am new here,just keep your promise and pay on time,otherwise i'll have to pay it for myself.So if ordering now, I'd get invoiced on the 12th?I am working on that. I can send on 12th if you like ;D
Well I was asking because I get paid on the 15th, so if invoices are going out a little after the 12th it'd be even better
Post by: DALExSNAIL on Tue, 30 August 2016, 10:28:35
Then pay on 15th. It's no problem at all. Or you can put down a deposit and pay the rest later. I am new here,just keep your promise and pay on time,otherwise i'll have to pay it for myself.So if ordering now, I'd get invoiced on the 12th?I am working on that. I can send on 12th if you like ;D
Well I was asking because I get paid on the 15th, so if invoices are going out a little after the 12th it'd be even better
Ok cool, when i have decided on colors and stuff i will PM you and we can straighten out the details.
Post by: JDragon on Tue, 30 August 2016, 12:02:56
I would be interested in a gold mid case also. If it's possible, I would like to order a case using the regular colors and then add on a gold mid case? That way if it comes out terrible at least I will have a regular one to work with. Gold is the color I want the most though. :DLooks fantasticWe never do the color of gold before. We got no sample of it. It may come out terrible.Maybe we'll add more color. But the colors we have at the moment are really great.
Any chance of a gold mid plate?
So,please consider the colors we have right now.If that doesn't please you,PM me. Maybe we can work something out. After all it's custom keyboard,it should go with the way you like ;D
Post by: mathilda on Wed, 31 August 2016, 09:01:19
What does the bottom case look like?clean ;)Show Image(https://geekhack.org/index.php?action=dlattach;topic=83590.0;attach=145135;image)
Thanks bro
Post by: stbasterd on Thu, 01 September 2016, 07:46:52
I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.
Thanks for taking it into consideration. :thumb:
Any ideas on how this special plate will be distributed to the buyers? Through another group buy sometime after this buy perhaps?
Would be really good addition to this board if there are any solid information on the switch-top opening plate! :thumb:
Post by: RevoTeam on Thu, 01 September 2016, 10:21:37
Post by: joey on Thu, 01 September 2016, 10:24:30
update here,we are adding two colors now. Orange and deep blue for T0mb3ry's Yuri IC.Have you got any colour samples?
I wish there was a full board sample of the dark grey. Deciding on colours is hard!
Post by: T0mb3ry on Thu, 01 September 2016, 10:29:05
update here,we are adding two colors now. Orange and deep blue for T0mb3ry's Yuri IC.
Yey! :)
I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.
Thanks for taking it into consideration. :thumb:
Any ideas on how this special plate will be distributed to the buyers? Through another group buy sometime after this buy perhaps?
Would be really good addition to this board if there are any solid information on the switch-top opening plate! :thumb:
Pm RevoTeam about it. They do offer carbon fiber plates :)
Post by: kokokoy on Thu, 01 September 2016, 11:25:18
Either I'm adding a middle layer or switching to those new ones. Is the additional mid layer still approx $50?
Post by: JDragon on Thu, 01 September 2016, 12:38:18
update here,we are adding two colors now. Orange and deep blue for T0mb3ry's Yuri IC.
Oooooh... even more things to add to my indecision. Hoping for color samples. :)
Post by: RevoTeam on Thu, 01 September 2016, 21:08:56
Agree sample on the new colors would be nice.
Either I'm adding a middle layer or switching to those new ones. Is the additional mid layer still approx $50?
Yep，it about ￥50. i am still trying to make a render for the new color. But you can see them from Yuri.
Post by: joey on Fri, 02 September 2016, 08:28:00
I hope you really meant 50 chinese yuan :PAgree sample on the new colors would be nice.
Either I'm adding a middle layer or switching to those new ones. Is the additional mid layer still approx $50?
Yep，it about ￥50. i am still trying to make a render for the new color. But you can see them from Yuri.
Post by: RevoTeam on Fri, 02 September 2016, 09:34:23
sorry its USD . my bad.I hope you really meant 50 chinese yuan :PAgree sample on the new colors would be nice.
Either I'm adding a middle layer or switching to those new ones. Is the additional mid layer still approx $50?
Yep，it about ￥50. i am still trying to make a render for the new color. But you can see them from Yuri.
从我的 iPhone 发送，使用 Tapatalk
Post by: joey on Mon, 05 September 2016, 17:59:24
Post by: RevoTeam on Tue, 06 September 2016, 20:34:10
Finally submitted :thumb: Gotta start on the PCB soon!:thumb: :thumb: :thumb:
Post by: JDragon on Wed, 07 September 2016, 00:54:53
Hype hype hype :thumb:
Post by: romevi on Wed, 07 September 2016, 01:06:21
Post by: RevoTeam on Wed, 07 September 2016, 13:16:58
Any way to get Yarbo cable only?!No,sorry.
Post by: eksuen on Wed, 07 September 2016, 13:44:51
Post by: joey on Thu, 08 September 2016, 05:09:17
Stabilizers are not included, right?No.
Post by: CMYK on Sat, 10 September 2016, 18:56:39
Post by: fublamchu on Sat, 10 September 2016, 20:50:51
Hi, new member here looking to build a custom board. This might be cutting it a little close to the deadline, but I had a bunch of questions regarding this group guy.
Why would someone pick a partial plate over a full plate?
What advantage is there to getting the Yarbo cable?
Is the D logo permanently attached to the plate?
Partial plates can allow you to have the feeling of PCB mounted switches on your board (which some people think is a better typing experience over plate mounting) while also having the stabilizers secured by plate.
I'm pretty sure the Yarbo cable is simply aesthetic choice, no performance advantages afaik
The D logo doesn't have to be included on the plate (it's an option on the gb form)
Post by: KatzenKinder on Sat, 10 September 2016, 21:22:46
Post by: CMYK on Sat, 10 September 2016, 21:58:49
Post by: fublamchu on Sat, 10 September 2016, 22:20:55
Thanks for the reply. For some reason I thought the D logo was something that would be glued to the keyboard if you wanted it.
Do people buy extra plates, and pcbs for extra switch choices and color choices?
PCBs maybe (just to keep extras...?), but plates are a bit harder to mess around with since they're kept in place with the soldered switches so I would think extra plates are a bit uncommon
Post by: kokokoy on Sat, 10 September 2016, 22:50:26
Post by: garoti on Sun, 11 September 2016, 07:23:01
(https://geekhack.org/index.php?action=dlattach;topic=83590.0;attach=145133;image)
(https://geekhack.org/index.php?action=dlattach;topic=83590.0;attach=145135;image)
Post by: joey on Sun, 11 September 2016, 07:31:26
Which is this colour in image? Pink or Red?That's the pink. I hope!Show Image(https://geekhack.org/index.php?action=dlattach;topic=83590.0;attach=145133;image)Show Image(https://geekhack.org/index.php?action=dlattach;topic=83590.0;attach=145135;image)
Post by: RevoTeam on Sun, 11 September 2016, 12:04:43
Btw @RevoTeam how do we add additional parts to an existing order? Submit a new one?You can pm me.... I've been really busy with my factory these days.
Post by: RevoTeam on Sun, 11 September 2016, 12:05:32
Which is this colour in image? Pink or Red?Pink. my friend...Show Image(https://geekhack.org/index.php?action=dlattach;topic=83590.0;attach=145133;image)Show Image(https://geekhack.org/index.php?action=dlattach;topic=83590.0;attach=145135;image)
Post by: RevoTeam on Sun, 11 September 2016, 12:09:46
Post by: JDragon on Mon, 12 September 2016, 13:31:45
Post by: romevi on Mon, 12 September 2016, 13:33:23
What's the difference between the Yarbo cable and the normal cable? Is it just PS/2 support?
Yarbo is PS/2 only and has a much more refined connection.
In other words, snake oil. :))
Post by: redbanshee on Mon, 12 September 2016, 13:49:27
What's the difference between the Yarbo cable and the normal cable? Is it just PS/2 support?
Yarbo is PS/2 only and has a much more refined connection.
In other words, snake oil. :))
USB has to send an IN token before it can ACK the host to execute a keycommand and is therefore fundamentally slower than a PS/2 that is directly addressed. USB runs in polling mode vs PS2 being "constantly connected".
Post by: jerue on Mon, 12 September 2016, 13:56:34
What's the difference between the Yarbo cable and the normal cable? Is it just PS/2 support?
has a much more refined connection.
In other words, snake oil. :))
...what?
Post by: romevi on Mon, 12 September 2016, 14:03:48
What's the difference between the Yarbo cable and the normal cable? Is it just PS/2 support?
has a much more refined connection.
In other words, snake oil. :))
...what?
Yarbo is PS/2 only and has a much more refined connection.
In other words, snake oil. :))
Post by: RevoTeam on Tue, 13 September 2016, 07:03:15
Post by: Moistgun on Tue, 13 September 2016, 10:54:38
What's the difference between the Yarbo cable and the normal cable? Is it just PS/2 support?
has a much more refined connection.
In other words, snake oil. :))
...what?
Yarbo is PS/2 only and has a much more refined connection.
In other words, snake oil. :))
Thanks for clarifying!
Post by: T0mb3ry on Tue, 13 September 2016, 11:54:16
Post by: Data on Tue, 13 September 2016, 19:44:27
Post by: Moistgun on Tue, 13 September 2016, 19:50:11
Post by: MMKB on Tue, 13 September 2016, 20:07:19
Post by: RevoTeam on Tue, 13 September 2016, 20:41:10
Paid. Hope the production goes smoothly.The production will go very smoothly. I have so many experiences. The hard part for me is collecting payment. Using Paypal is very new to me.
Anyway, i am hoping to ship it out between late November and early December,so it could your Christmas present. :cool:
Post by: smittysteve on Tue, 13 September 2016, 21:07:04
Thanks Revo for a super smooth GB so far.
Post by: Moistgun on Tue, 13 September 2016, 21:16:11
:p :p :p :thumb: :p :p :p
Post by: kokokoy on Tue, 13 September 2016, 21:19:10
Post by: JDragon on Tue, 13 September 2016, 21:52:19
Post by: joey on Wed, 14 September 2016, 15:21:13
Just want to confirm:
Winkeyless layout(black case,pink case,black plate)
On my invoice meant black top/bottom and pink middle piece?
Post by: JDragon on Wed, 14 September 2016, 16:46:09
Paid.
Just want to confirm:
Winkeyless layout(black case,pink case,black plate)
On my invoice meant black top/bottom and pink middle piece?
Would like confirmation of this as well.
Winkey layout(black case,yuri blue case,black plate) = black/blue/black layering? With black plate?
Thanks :D
Post by: poolside on Wed, 14 September 2016, 18:00:55
Post by: JDragon on Wed, 14 September 2016, 19:17:33
I also asked Raymond about this. He confirmed that the first color listed is that of the bottom and top parts of the case (if of the same color, of course).
Great to hear! I'm so hyped about this board; want everything to be perfect. :D
Post by: RevoTeam on Wed, 14 September 2016, 23:07:12
Paid.Yep, i left middle in the second case.
Just want to confirm:
Winkeyless layout(black case,pink case,black plate)
On my invoice meant black top/bottom and pink middle piece?
My bad. It means black case,pink middle case, black full plate.
Everybody chose a full plate. :D :D :D
Post by: Moistgun on Fri, 16 September 2016, 14:55:40
I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.
Thanks for taking it into consideration. :thumb:
T0m, It would be really great if you shared your outcome with the rest of us.
Would love a plate with switch top opening
Post by: T0mb3ry on Fri, 16 September 2016, 15:10:05
I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.
Thanks for taking it into consideration. :thumb:
T0m, It would be really great if you shared your outcome with the rest of us.
Would love a plate with switch top opening
Yeah Revo offered me carbon fiber plate for 30$, and i took it beacuse it is really good offer. :)
So if someone want an carbon fiber plate, i think you can still pm Revo for it. Maybe you can get it as extra.
Post by: JDragon on Fri, 16 September 2016, 20:33:38
I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.
Thanks for taking it into consideration. :thumb:
T0m, It would be really great if you shared your outcome with the rest of us.
Would love a plate with switch top opening
Yeah Revo offered me carbon fiber plate for 30$, and i took it beacuse it is really good offer. :)
So if someone want an carbon fiber plate, i think you can still pm Revo for it. Maybe you can get it as extra.
:O
Does it allow for switch top opening?
Post by: poolside on Sun, 18 September 2016, 06:14:57
Post by: Moistgun on Sun, 18 September 2016, 07:13:31
It looks like it does, would like a confirmation if possibleI am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.
Thanks for taking it into consideration. :thumb:
T0m, It would be really great if you shared your outcome with the rest of us.
Would love a plate with switch top opening
Yeah Revo offered me carbon fiber plate for 30$, and i took it beacuse it is really good offer. :)
So if someone want an carbon fiber plate, i think you can still pm Revo for it. Maybe you can get it as extra.
:O
Does it allow for switch top opening?
Post by: RevoTeam on Sun, 18 September 2016, 21:55:24
Well, that's all depend on the buyer, if they tell me they want it,i'll do it. But the alu and pc plate won't support switch opening.I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.
I'd like to make a custom plate from materials i want and with switch top removal cutouts.
That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.
Thanks for taking it into consideration. :thumb:
T0m, It would be really great if you shared your outcome with the rest of us.
Would love a plate with switch top opening
Yeah Revo offered me carbon fiber plate for 30$, and i took it beacuse it is really good offer. :)
So if someone want an carbon fiber plate, i think you can still pm Revo for it. Maybe you can get it as extra.
:O
Does it allow for switch top opening?
Post by: swimmingbird on Wed, 21 September 2016, 18:39:54
Post by: joey on Wed, 21 September 2016, 18:40:58
Can I confirm that there is a colour choice for all components and not just the middle layer? e.g. silver top and bottom with pink middle?Yes. Each piece (top, middle, bottom) can be a different colour.
Post by: swimmingbird on Wed, 21 September 2016, 22:21:41
Can I confirm that there is a colour choice for all components and not just the middle layer? e.g. silver top and bottom with pink middle?Yes. Each piece (top, middle, bottom) can be a different colour.
oh lawd
Post by: Moistgun on Fri, 23 September 2016, 14:49:39
I got a
Silver case with the blue middle, with a silver AND extra blue plate
hoping to match that with hydro early next year!
Post by: joey on Fri, 23 September 2016, 15:10:15
Just wondering what everyone else ended up getting
I got a
Silver case with the blue middle, with a silver AND extra blue plate
hoping to match that with hydro early next year!
black pink black.
Post by: Moistgun on Fri, 23 September 2016, 15:31:18
Just wondering what everyone else ended up getting
I got a
Silver case with the blue middle, with a silver AND extra blue plate
hoping to match that with hydro early next year!
black pink black.
Nice one Joey.
there is a killer pic of that combo in the IC thread.
Looks really nice.
Post by: Data on Fri, 23 September 2016, 19:15:37
I'll most likely put Skeletor on this board. The splash of blue made the most sense.
Post by: kokokoy on Fri, 23 September 2016, 21:50:34
Not sure what I'll put on these but I have an OG dyesub that I've been itching to use.
Post by: Prelim on Sat, 24 September 2016, 03:49:54
Can you explain why the pcb doesn't support ISO? Because it's a very easy thing to implement
Post by: JDragon on Sat, 24 September 2016, 05:28:31
Post by: joey on Wed, 28 September 2016, 11:18:01
Post by: Moistgun on Thu, 29 September 2016, 16:00:24
Post by: RevoTeam on Sat, 01 October 2016, 10:00:37
Any news RevoTeam?It's national holiday in China now,so i will update after holiday.
Post by: joey on Sat, 01 October 2016, 10:08:59
Enjoy!Any news RevoTeam?It's national holiday in China now,so i will update after holiday.
Post by: KHAANNN on Fri, 07 October 2016, 08:44:05
Would love to get a set if you ever turn the operation into something like winkeyless.kr (with direct credit card payments)
I'm kind of glad I missed it too, I would probably have a stroke trying to decide between the colors, the pink one is so alluring
Post by: Moistgun on Tue, 11 October 2016, 10:07:04
Any news RevoTeam?It's national holiday in China now,so i will update after holiday.
Is it still holiday?
Post by: MMKB on Tue, 11 October 2016, 13:59:47
Any news RevoTeam?It's national holiday in China now,so i will update after holiday.
Is it still holiday?
Nope
Post by: S0L on Sat, 15 October 2016, 10:50:28
Post by: RevoTeam on Sat, 15 October 2016, 21:31:26
Post by: garoti on Mon, 17 October 2016, 03:42:41
Post by: Moistgun on Fri, 21 October 2016, 12:03:19
I got some updates,people. Sorry for the long wait,but we are still in schedule.
What do you mean by "I got some updates"
Post by: MMKB on Fri, 21 October 2016, 12:57:35
Post by: Moistgun on Fri, 21 October 2016, 14:09:11
I got the Revo numpad after a month of delay. Issues and delays in engineering is pretty understandable but still timely communication is much appreciated.
How do you like the revo numpad? quality and design wise?
anyone know if this is the same manufacturer?
Post by: henz on Sat, 22 October 2016, 04:05:44
Post by: RevoTeam on Sat, 22 October 2016, 22:09:28
Yes, I run that pad on MD. Same qualityI got the Revo numpad after a month of delay. Issues and delays in engineering is pretty understandable but still timely communication is much appreciated.
How do you like the revo numpad? quality and design wise?
anyone know if this is the same manufacturer?
Post by: poolside on Sun, 23 October 2016, 12:35:01
Updates here:
We are currently CNCing the alu. I got some picture from the factory.After finish CNC,we will send them to the anode factory.I'll update when that happens.
Thanks,
(Attachment Link)
(Attachment Link)
Thanks for the update. I had not noticed there was a reserved post on the first page. :)
Post by: Data on Mon, 24 October 2016, 13:27:40
I got the Revo numpad after a month of delay. Issues and delays in engineering is pretty understandable but still timely communication is much appreciated.
How do you like the revo numpad? quality and design wise?
anyone know if this is the same manufacturer?
I have it. Same Revo.
(http://i.imgur.com/UgZVLCL.jpg)
(http://i.imgur.com/i9NCVaI.jpg)
(http://i.imgur.com/dxSBINZ.jpg)
The quality is up there with Oddforge (VE.A) or any of the recent Korean customs. They're legit.
Post by: Moistgun on Mon, 24 October 2016, 13:43:47
Thanks for the update. I had not noticed there was a reserved post on the first page. :)
Thanks for catching this man, I hadn't noticed it either.
I have it. Same Revo.Show Image(http://i.imgur.com/UgZVLCL.jpg)Show Image(http://i.imgur.com/i9NCVaI.jpg)Show Image(http://i.imgur.com/dxSBINZ.jpg)
The quality is up there with Oddforge (VE.A) or any of the recent Korean customs. They're legit.
Great to hear man, thanks for sharing. very exciting :D
Post by: romevi on Mon, 24 October 2016, 13:46:44
Post by: Moistgun on Mon, 24 October 2016, 14:44:01
Dang. Should've just gotten the Revo num pad!
I hate you so much
Post by: poolside on Mon, 24 October 2016, 18:05:11
Post by: Moistgun on Mon, 24 October 2016, 22:04:19
Post by: RevoTeam on Tue, 25 October 2016, 01:48:35
May we expect a matching Dr.D numpad someday, with the middle plate and the slant on the backside?You can! i'll talk to Dr.D see if he is interested ;D
Post by: RevoTeam on Tue, 25 October 2016, 01:50:42
If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know. :)There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol
Post by: RevoTeam on Tue, 25 October 2016, 01:58:26
Dang. Should've just gotten the Revo num pad!Actually, MD have talked to me about open the keypad again.But my factory are too busy,i don't want people to wait.There will be a third run,just not right now. :thumb:
Post by: Moistgun on Tue, 25 October 2016, 07:24:40
Haha, well thanks for the info!If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know. :)There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol
Post by: joey on Tue, 25 October 2016, 07:38:09
Hmmm. Now I can sell my one-off half plate for like $1000!!!Haha, well thanks for the info!If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know. :)There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol
Post by: Fictiouz on Tue, 25 October 2016, 07:42:33
Hmmm. Now I can sell my one-off half plate for like $1000!!!Haha, well thanks for the info!If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know. :)There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol
:dolphin:
Post by: Moistgun on Tue, 25 October 2016, 07:50:46
Joey plsHmmm. Now I can sell my one-off half plate for like $1000!!!Haha, well thanks for the info!If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know. :)There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol
Post by: RevoTeam on Tue, 25 October 2016, 09:31:45
Good choice,my friend! i never saw this coming.Hmmm. Now I can sell my one-off half plate for like $1000!!!Haha, well thanks for the info!If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know. :)There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol
Post by: RevoTeam on Tue, 25 October 2016, 09:43:10
[attachimg=1]
Post by: effectiveduck on Mon, 31 October 2016, 04:44:24
Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs
Cheers.
Post by: catweewee on Mon, 31 October 2016, 08:28:18
Can't afford this so if anyone wants to take over my order let me know.
Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs
Cheers.
If the Revo Team is okay with it,
I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass :(
Post by: Moistgun on Mon, 31 October 2016, 08:59:39
They have already been paid for and cut I believe, I assume they will at least need someone to buy the second plate.Can't afford this so if anyone wants to take over my order let me know.
Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs
Cheers.
If the Revo Team is okay with it,
I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass :(
Post by: catweewee on Mon, 31 October 2016, 09:38:22
They have already been paid for and cut I believe, I assume they will at least need someone to buy the second plate.Can't afford this so if anyone wants to take over my order let me know.
Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs
Cheers.
If the Revo Team is okay with it,
I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass :(
Spoke to Revo team, said that they have some extras that they will be selling on their taobao store and here in December. I wonder if the SS plate and extra pcb can be placed in the after gb sale instead.
Post by: RevoTeam on Mon, 31 October 2016, 10:18:52
I'll let you take it minus the silver plate and extra PCB. I can't say for sure there will be leftovers. I always make one or two more for the GB in case there is any damage. If there are all good,then i will have some leftovers. :pThey have already been paid for and cut I believe, I assume they will at least need someone to buy the second plate.Can't afford this so if anyone wants to take over my order let me know.
Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs
Cheers.
If the Revo Team is okay with it,
I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass :(
Spoke to Revo team, said that they have some extras that they will be selling on their taobao store and here in December. I wonder if the SS plate and extra pcb can be placed in the after gb sale instead.
Post by: catweewee on Mon, 31 October 2016, 14:51:23
Sounds great, Ive emailed you.I'll let you take it minus the silver plate and extra PCB. I can't say for sure there will be leftovers. I always make one or two more for the GB in case there is any damage. If there are all good,then i will have some leftovers. :pThey have already been paid for and cut I believe, I assume they will at least need someone to buy the second plate.Can't afford this so if anyone wants to take over my order let me know.
Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs
Cheers.
If the Revo Team is okay with it,
I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass :(
Spoke to Revo team, said that they have some extras that they will be selling on their taobao store and here in December. I wonder if the SS plate and extra pcb can be placed in the after gb sale instead.
Sent from my iPhone using Tapatalk
Post by: catweewee on Sat, 05 November 2016, 16:16:16
Post by: LEEHYOBIN on Sun, 06 November 2016, 08:34:07
Is there a way to get the cable provided?
Post by: RevoTeam on Sun, 06 November 2016, 09:30:06
Good design keyboard :)Many people asked about this cable. But this is all handmade cables, so it will take time. I am not sure when i can provide them.Maybe later ;D
Is there a way to get the cable provided?
Post by: Moistgun on Sun, 06 November 2016, 16:34:46
Hi, everyone
Any updates??
Post by: RevoTeam on Mon, 07 November 2016, 03:09:31
No, still CNCing... I will update in the reserved spot. ;DHi, everyone
Any updates??
Post by: ticktwo on Mon, 07 November 2016, 05:17:54
Post by: catweewee on Sun, 13 November 2016, 07:19:09
Post by: mll8394 on Sun, 13 November 2016, 09:08:46
Post by: RevoTeam on Sun, 13 November 2016, 10:04:05
How I wish all keyboards were designed like this :))Well,I am flattered.THX ;D
Post by: RevoTeam on Sun, 13 November 2016, 10:05:39
Still CNCING?Yep, the lead time is 90 days after payment.Please be patient. ;D
Post by: catweewee on Sun, 13 November 2016, 20:25:37
Is that 90 days after each invoice?Still CNCING?Yep, the lead time is 90 days after payment.Please be patient. ;D
Sent from my iPhone using Tapatalk
Post by: Moistgun on Mon, 14 November 2016, 07:04:03
Is that 90 days after each invoice?Still CNCING?Yep, the lead time is 90 days after payment.Please be patient. ;D
Sent from my iPhone using Tapatalk
He pays the cnc factory. Gets cut parts within 90 days of paying
Post by: JDragon on Wed, 23 November 2016, 01:52:46
Post by: RevoTeam on Thu, 01 December 2016, 22:24:20
Post by: kokokoy on Thu, 01 December 2016, 22:28:54
Post by: Moistgun on Thu, 01 December 2016, 22:30:53
A little update here,we are finishing CNC, and waiting for anode.How many boards were purchased?
Post by: catweewee on Thu, 01 December 2016, 22:33:02
A little update here,we are finishing CNC, and waiting for anode.
Good to know!
Post by: smittysteve on Thu, 01 December 2016, 22:34:55
Post by: quochung1989 on Fri, 02 December 2016, 03:48:12
Post by: neon_tom on Fri, 02 December 2016, 12:36:16
Post by: garoti on Mon, 05 December 2016, 05:27:43
(http://imgur.com/LR8XOba)
(http://imgur.com/PwmgwUL)
(http://imgur.com/4Q8BrIp)
Post by: joey on Mon, 05 December 2016, 05:28:57
Anything change with original design?Hmm :SShow Image(http://imgur.com/LR8XOba)Show Image(http://imgur.com/PwmgwUL)Show Image(http://imgur.com/4Q8BrIp)
Post by: garoti on Mon, 05 December 2016, 05:32:06
(http://i.imgur.com/PwmgwUL.jpg)
(http://i.imgur.com/4Q8BrIp.jpg)
Post by: redbanshee on Mon, 05 December 2016, 10:45:15
Show Image(http://i.imgur.com/LR8XOba.jpg)Show Image(http://i.imgur.com/PwmgwUL.jpg)Show Image(http://i.imgur.com/4Q8BrIp.jpg)
???? Looks like they arent done yet or something. The recesses for the feet are in the right spot on the back.? Revo team?
Post by: joey on Mon, 05 December 2016, 10:50:05
Post by: poolside on Mon, 05 December 2016, 16:25:09
Post by: pomk on Mon, 05 December 2016, 16:29:06
Post by: Data on Tue, 06 December 2016, 14:54:43
Show Image(http://i.imgur.com/LR8XOba.jpg)Show Image(http://i.imgur.com/PwmgwUL.jpg)Show Image(http://i.imgur.com/4Q8BrIp.jpg)
???? Looks like they arent done yet or something. The recesses for the feet are in the right spot on the back.? Revo team?
This assessment is accurate. The partial side cuts are probably the most complex and hence the final step in the machining process. None of this really conflicts with Revo's statements and we're still on track.
Post by: Permeability on Tue, 06 December 2016, 20:28:45
If anyone is interested in picking my order please PM me.
The order is as follows:
Winkey Keyboard w/ Black case and Red middle. Red plate and extra Polycarbonate plate.
Gone
Thanks.
Post by: renzpwns on Wed, 07 December 2016, 06:18:43
Hi,Damn, that whole kit was exactly what I was looking for in this GB, shame I spent most of my money on the Viper.
If anyone is interested in picking my order please PM me.
The order is as follows:
Winkey Keyboard w/ Black case and Red middle. Red plate and extra Polycarbonate plate.
Thanks.
Post by: Moistgun on Wed, 07 December 2016, 12:31:43
Post by: RevoTeam on Wed, 07 December 2016, 20:50:49
He did say 'finishing'.. not 'finished', so lets hope it's that!Very clever man, there is nothing changed from the OG design.
Post by: RevoTeam on Wed, 07 December 2016, 20:51:44
They are not done,there will be a final cut. Nothing changed. ;DShow Image(http://i.imgur.com/LR8XOba.jpg)Show Image(http://i.imgur.com/PwmgwUL.jpg)Show Image(http://i.imgur.com/4Q8BrIp.jpg)
???? Looks like they arent done yet or something. The recesses for the feet are in the right spot on the back.? Revo team?
Post by: RevoTeam on Wed, 07 December 2016, 20:53:04
Yep,nothing changed,we are still on track.Show Image(http://i.imgur.com/LR8XOba.jpg)Show Image(http://i.imgur.com/PwmgwUL.jpg)Show Image(http://i.imgur.com/4Q8BrIp.jpg)
???? Looks like they arent done yet or something. The recesses for the feet are in the right spot on the back.? Revo team?
This assessment is accurate. The partial side cuts are probably the most complex and hence the final step in the machining process. None of this really conflicts with Revo's statements and we're still on track.
Post by: RevoTeam on Wed, 07 December 2016, 20:56:06
28 on GH. I think it's pretty good for the first time. ;DA little update here,we are finishing CNC, and waiting for anode.How many boards were purchased?
Post by: fublamchu on Wed, 07 December 2016, 23:48:12
Post by: RevoTeam on Thu, 08 December 2016, 04:46:53
Any chance for a round 2?I am not sure. I have some plans.And there will be some change in round 2 if there will be a round 2.I won't do the exact same thing. :p
Post by: Prelim on Thu, 08 December 2016, 08:01:38
Post by: joey on Thu, 08 December 2016, 08:34:07
I really should start on my PCB :confused:
Post by: Moistgun on Thu, 08 December 2016, 08:41:07
Can't wait for this!
I really should start on my PCB :confused:
I think thats a good idea joey. :)) :)) need a nice tkl for all those clacks
Post by: poolside on Fri, 09 December 2016, 15:53:49
May we expect a matching Dr.D numpad someday, with the middle plate and the slant on the backside?You can! i'll talk to Dr.D see if he is interested ;D
Great! What did he say?
Post by: Data on Wed, 14 December 2016, 16:42:37
GIVE ME THE D! :cool:
Post by: Permeability on Thu, 15 December 2016, 17:23:45
Hi,
If anyone is interested in picking my order please PM me.
The order is as follows:
Winkey Keyboard w/ Black case and Red middle. Red plate and extra Polycarbonate plate.
Thanks.
Gone
Post by: Moistgun on Thu, 15 December 2016, 17:43:08
Post by: Moistgun on Fri, 30 December 2016, 12:16:20
Feed me more updates.
:D
Post by: Data on Fri, 30 December 2016, 15:31:25
Post by: smittysteve on Fri, 30 December 2016, 15:37:54
Hoping these ship before the Chinese new year or we're in for a long delay. :-[
Agreed. My Jones is strong for this board!
With the Revo HHKB IC looking solid, I'm sure the Revo folks will be pushing these out ASAP. Our soldering guns are ready, Revo Team! :)
Post by: Data on Tue, 03 January 2017, 11:37:57
Post by: JDragon on Fri, 06 January 2017, 02:25:27
Post by: Moistgun on Fri, 06 January 2017, 18:18:25
(https://media3.giphy.com/media/4a1kDsX4xO34Y/200w.gif#73)
Post by: romevi on Fri, 06 January 2017, 23:00:07
Post by: smittysteve on Fri, 06 January 2017, 23:29:13
Surely there should be some updates by now, no?
Yeah, getting a little quiet... almost a month since our last stoke from Raymond. Know they have the MD deal going too- but we're easy. One blurry pic of a slab of anodized Alu goes a long way.
Blow on our embers here (don't make that dirty, degenerates), Revo Team!!
Post by: RevoTeam on Sun, 08 January 2017, 09:42:54
Sorry to tell everyone that we have some delay in this GB.Due to the serious environmental problem here,all the anode factory have been shut down.
We have finished all the CNC progress,and all the keyboards are waiting for anodizing.
The good news is we are expecting to start anodizing within this week,that means i'll try my best to start shipping it before lunar new year(in this year it's 27 Jan).
However i can't make any promise right now, i apologize for any inconvenience because of this delay.Ill keep you guys updated.
Post by: joey on Sun, 08 January 2017, 09:46:31
Have you had experience with this other anodization place?
Post by: Moistgun on Sun, 08 January 2017, 09:52:50
Damn.
Have you had experience with this other anodization place?
Something like 15000 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
Post by: RevoTeam on Sun, 08 January 2017, 09:58:28
Yep,they shut down almost every factories. Anyway,all the anode factories here.There is nothing i can do expect waiting.Damn.
Have you had experience with this other anodization place?
Something like 1500 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
Post by: MMKB on Sun, 08 January 2017, 12:04:05
Yep,they shut down almost every factories. Anyway,all the anode factories here.There is nothing i can do expect waiting.Damn.
Have you had experience with this other anodization place?
Something like 1500 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
I know the smog situation back home. Something like the great smog of LA/Pittsburgh/London. Well although the shutdown sucks for me. I hope the Revo team stay safe and protect yourselves well.
Post by: RevoTeam on Sun, 08 January 2017, 20:03:22
Yep,the situation is really bad here,so many factories have been shut down.All we can do is to wait it out.Dr.D will start anodizing around this weekend.I really want to start shipping this before Chinese New Year.Yep,they shut down almost every factories. Anyway,all the anode factories here.There is nothing i can do expect waiting.Damn.
Have you had experience with this other anodization place?
Something like 1500 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
I know the smog situation back home. Something like the great smog of LA/Pittsburgh/London. Well although the shutdown sucks for me. I hope the Revo team stay safe and protect yourselves well.
Post by: smittysteve on Sun, 08 January 2017, 20:17:34
Post by: Data on Sun, 08 January 2017, 22:54:23
Damn.
Have you had experience with this other anodization place?
Something like 1500 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
Wow, that's crazy.
Post by: kokokoy on Mon, 09 January 2017, 01:50:06
Post by: RevoTeam on Mon, 09 January 2017, 09:46:01
It's more like 15000 factories.They shut down around 2500 factories in Beijing area last year. Think how many they will shut down if the problem become national. It's pretty serious.Damn.
Have you had experience with this other anodization place?
Something like 1500 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
Wow, that's crazy.
Post by: RevoTeam on Mon, 09 January 2017, 09:46:42
Still thanks for the update Revo. Again forgot to look at page 1 this morning. ;Dno bother. just feel bad for the delay.
Post by: RevoTeam on Mon, 09 January 2017, 09:48:38
Thanks for the update, Revo. Didn't know the air sitch was that bad right now. Stay healthy- beautiful ano'd boards can wait... keep the lungs free of any space grey coatings. :)Thanks for your support man. It means a lot. I always feel so warm seeing your reply,always make me so happy. Thanks,steve
Post by: joey on Mon, 09 January 2017, 10:11:23
Completely out of your control.Still thanks for the update Revo. Again forgot to look at page 1 this morning. ;Dno bother. just feel bad for the delay.
We're all just excited to get our boards!
Post by: Moistgun on Mon, 09 January 2017, 10:19:16
Whoops! EditedIt's more like 15000 factories.They shut down around 2500 factories in Beijing area last year. Think how many they will shut down if the problem become national. It's pretty serious.Damn.
Have you had experience with this other anodization place?
Something like 1500 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
Wow, that's crazy.
Post by: RevoTeam on Mon, 09 January 2017, 10:26:08
i am excited as well,Dr.D should be awesome. i am just want to make sure i am here and i will deliver what you guys paid for.Won't be like that ivan guy.So,here ill leave my skype here(ID :raymondwyy) and everyone can find me if i am not on GH. I am quite busy recently. ;DCompletely out of your control.Still thanks for the update Revo. Again forgot to look at page 1 this morning. ;Dno bother. just feel bad for the delay.
We're all just excited to get our boards!
Post by: smittysteve on Mon, 09 January 2017, 10:32:01
Thanks for the update, Revo. Didn't know the air sitch was that bad right now. Stay healthy- beautiful ano'd boards can wait... keep the lungs free of any space grey coatings. :)Thanks for your support man. It means a lot. I always feel so warm seeing your reply,always make me so happy. Thanks,steve
Awww, shucks. :-* Thanks for your support and ninja-like GB running skills. We have total trust in you and your team to deliver awesome boards as soon as possible. We're just all obsessive-compulsive keyboard nerds- when we know there is another board to build (and then fondle) on the horizon, we start losing sleep dreaming about it... hahaha
Take care, Raymond!
Post by: RevoTeam on Mon, 09 January 2017, 10:34:20
i dont know how many they shut down. I just take a wild guess.cause this time the smog hit almost every city in the country. It's really a hard time for my son. it's almost like the end of world,man.there is no word for this. It's too much a price for being the world factory.Whoops! EditedIt's more like 15000 factories.They shut down around 2500 factories in Beijing area last year. Think how many they will shut down if the problem become national. It's pretty serious.Damn.
Have you had experience with this other anodization place?
Something like 1500 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
Wow, that's crazy.
Anyway,life goes on. we'll keep making boards. ;D
Post by: Moistgun on Mon, 09 January 2017, 10:42:37
To be honest, as an American, I have practically zero awareness of this issue or that it was even that bad. I'm sorry it's so troublesome for your family and I hope it clears up soon.i dont know how many they shut down. I just take a wild guess.cause this time the smog hit almost every city in the country. It's really a hard time for my son. it's almost like the end of world,man.there is no word for this. It's too much a price for being the world factory.Whoops! EditedIt's more like 15000 factories.They shut down around 2500 factories in Beijing area last year. Think how many they will shut down if the problem become national. It's pretty serious.Damn.
Have you had experience with this other anodization place?
Something like 1500 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
Wow, that's crazy.
Anyway,life goes on. we'll keep making boards. ;D
Until now I just thought it was only somewhat unhealthy, and a obstruction to visibility
Post by: RevoTeam on Mon, 09 January 2017, 10:44:30
Quote
Awww, shucks. :-* Thanks for your support and ninja-like GB running skills. We have total trust in you and your team to deliver awesome boards as soon as possible. We're just all obsessive-compulsive keyboard nerds- when we know there is another board to build (and then fondle) on the horizon, we start losing sleep dreaming about it... hahaha
Take care, Raymond!
I just try my best making things happen. Tbh, i am a little bit obsessive-compulsive myself. I can understand the feeling, i used to think about what i bought every night.Now when i am running GB all i want to do is make it more smooth and deliver it on time.that's why i feel bad about the delay. still i haven't been able to update it cause i am crazy busy with my day job this month. However the worst time have pasted and ill try ship it before CNY. I maybe ship some order before CNY and ship the rest after CNY.
Post by: redbanshee on Mon, 09 January 2017, 10:51:32
i dont know how many they shut down. I just take a wild guess.cause this time the smog hit almost every city in the country. It's really a hard time for my son. it's almost like the end of world,man.there is no word for this. It's too much a price for being the world factory.Whoops! EditedIt's more like 15000 factories.They shut down around 2500 factories in Beijing area last year. Think how many they will shut down if the problem become national. It's pretty serious.Damn.
Have you had experience with this other anodization place?
Something like 1500 factories in China have shut down due to restrictions by the government from excessive smog. I don't think this has to do with the factory, but I may be wrong
Wow, that's crazy.
Anyway,life goes on. we'll keep making boards. ;D
Well Im glad the the Chinese government is actually trying to help with the smog problem. If it was the USA, Trump would just blame the smog on the "liberals" and build more coal factories.
Post by: RevoTeam on Mon, 09 January 2017, 10:54:14
Quote
To be honest, as an American, I have practically zero awareness of this issue or that it was even that bad. I'm sorry it's so troublesome for your family and I hope it clears up soon.It's not your bad. I mean we Chinese have already get used to this. And the government won't allow the press to talk about this. From me personally i 'd like to see them shutting down heavy pollute factory. However the anode factory's pollution is not mainly to the air.So we can be back to work soon. :D
Until now I just thought it was only somewhat unhealthy, and a obstruction to visibility
Post by: RevoTeam on Mon, 09 January 2017, 11:00:32
Quote
Well Im glad the the Chinese government is actually trying to help with the smog problem. If it was the USA, Trump would just blame the smog on the "liberals" and build more coal factories.
Well, from our point of view,your government is much much better than ours. I don't really into politics,but Trump seems he really dont know what's he is doing. I just heard he want to build a well between your country and Mexico.Too crazy.
Post by: DALExSNAIL on Mon, 09 January 2017, 11:52:48
Post by: Moistgun on Mon, 09 January 2017, 12:00:39
Wish there were extras :(
I got an extra plate and pcb if you can manage the case.
Post by: DALExSNAIL on Mon, 09 January 2017, 12:50:44
Wish there were extras :(
I got an extra plate and pcb if you can manage the case.
Moist pls
Post by: T0mb3ry on Mon, 09 January 2017, 12:57:56
I just heard he want to build a well between your country and Mexico.Too crazy.
A well? Coca Cola or Fanta well? Maybe unicorn tears well? I hope so... Anyway cant wait for my revo d ! ;)
Post by: RevoTeam on Mon, 09 January 2017, 13:17:51
pls have some mercy. I mean a wall. And i am looking forward with yuri set. LolI just heard he want to build a well between your country and Mexico.Too crazy.
A well? Coca Cola or Fanta well? Maybe unicorn tears well? I hope so... Anyway cant wait for my revo d ! ;)
Post by: RevoTeam on Mon, 09 January 2017, 13:20:28
Wish there were extras :(
Wish there were extras :(i do have extra. You can pm me. No rush. let me ship out GB first
Post by: swimmingbird on Mon, 16 January 2017, 23:41:43
Post by: Data on Tue, 17 January 2017, 07:18:45
Post by: RevoTeam on Tue, 17 January 2017, 07:43:38
any update on the anode?It's already in the anode factory now. Waiting for anodizing.
Post by: JDragon on Mon, 23 January 2017, 19:34:02
any update on the anode?It's already in the anode factory now. Waiting for anodizing.
Do you think it will be ready soon after the New Year shutdown?
Post by: RevoTeam on Mon, 23 January 2017, 19:52:29
any update on the anode?It's already in the anode factory now. Waiting for anodizing.
Do you think it will be ready soon after the New Year shutdown?
Yep, we have already anode some part of the GB. It will ready soon after people come back to work.
Post by: JDragon on Mon, 23 January 2017, 19:55:16
any update on the anode?It's already in the anode factory now. Waiting for anodizing.
Do you think it will be ready soon after the New Year shutdown?
Yep, we have already anode some part of the GB. It will ready soon after people come back to work.
Thanks for the update! Will eagerly await good news in a few weeks. Hope you and your family have a wonderful New Year. :)
Post by: catweewee on Thu, 26 January 2017, 03:38:54
I have a Pink Board with Grey Middle.
No D
Paid 308 including shipping and pp fees, looking to get the same back.
Pm me for more details
Post by: JDragon on Thu, 26 January 2017, 12:05:06
Post by: Moistgun on Fri, 27 January 2017, 15:24:02
Post by: joey on Fri, 27 January 2017, 15:31:26
How's it going with the factoryIt's still CNY.
Post by: poolside on Sun, 05 February 2017, 11:54:49
Post by: RevoTeam on Tue, 07 February 2017, 00:36:31
Revo, is there any way to get one of these coiled Yarbo cables added to an order? I realize now I should have ordered one earlier.sure thing.PM me pls.
Post by: RevoTeam on Tue, 07 February 2017, 00:38:34
How's it going with the factoryFactory will start to work on 12th. so i am hoping to start shipping this in the middle of Feb.
Post by: swimmingbird on Tue, 07 February 2017, 17:51:26
How's it going with the factoryFactory will start to work on 12th. so i am hoping to start shipping this in the middle of Feb.
Any idea how long the anode will take once they start the work?
Post by: Moistgun on Tue, 07 February 2017, 19:07:52
Post by: JDragon on Tue, 07 February 2017, 19:16:38
Post by: RevoTeam on Wed, 08 February 2017, 05:21:42
Since Feb has 28 days, I would guess one day for anode, one day for shipping prepOpps,my bad. Anode will take 2 or 3days. I am going to order some boxes and stuff tomorrow. I am going back to work. Holidays over...so sad...
Post by: RevoTeam on Wed, 08 February 2017, 05:36:51
Quote
Any idea how long the anode will take once they start the work?
Really quick...like 2 or 3days...we have finished some parts anode before new year.
Post by: joey on Wed, 08 February 2017, 05:38:14
Post by: catweewee on Fri, 10 February 2017, 04:54:45
a Pink board with grey middle, WKL
No D
If I cant get any takers on this by the time raymond is ready to ship, I'll build it :)
Post by: Kafka on Mon, 13 February 2017, 09:49:53
Post by: Moistgun on Mon, 13 February 2017, 09:51:39
How long till the gb is completely done? I ask because I wanna buy some headphones but still want to have enough for when the Revo HHKB starts :p
This buy is poised to ship in around a week apparently.
This doesn't have to do with the hhkb buy tho, just as a fyi
Post by: Kafka on Mon, 13 February 2017, 10:28:31
Revo said he would begin the hhkb buy shortly after he finished Dr. D, that why I ask.How long till the gb is completely done? I ask because I wanna buy some headphones but still want to have enough for when the Revo HHKB starts :p
This buy is poised to ship in around a week apparently.
This doesn't have to do with the hhkb buy tho, just as a fyi
Sent from my iPhone using Tapatalk
Post by: S0L on Thu, 16 February 2017, 02:51:54
(http://3.bp.blogspot.com/-7G90m56jgYk/VXhmwNqK9HI/AAAAAAAAAEU/EHhkXP8ZpnE/s1600/images.jpg)
Post by: RevoTeam on Thu, 16 February 2017, 09:52:55
Any updates? :rolleyes:Yes, The factory will ship the package to me today. I catch a cold and been in and out of hospital.Now i am a little better and this is shipping to me.I will ship this out ASAP.Show Image(http://3.bp.blogspot.com/-7G90m56jgYk/VXhmwNqK9HI/AAAAAAAAAEU/EHhkXP8ZpnE/s1600/images.jpg)
Post by: joey on Thu, 16 February 2017, 10:05:16
Sorry to hear that. Hope you feel better and can ship them without too much stress.Any updates? :rolleyes:Yes, The factory will ship the package to me today. I catch a cold and been in and out of hospital.Now i am a little better and this is shipping to me.I will ship this out ASAP.Show Image(http://3.bp.blogspot.com/-7G90m56jgYk/VXhmwNqK9HI/AAAAAAAAAEU/EHhkXP8ZpnE/s1600/images.jpg)
Post by: Moistgun on Thu, 16 February 2017, 10:18:19
Post by: smittysteve on Thu, 16 February 2017, 10:20:00
Post by: quochung1989 on Thu, 16 February 2017, 17:51:36
Post by: Data on Thu, 16 February 2017, 19:35:04
Any updates? :rolleyes:Yes, The factory will ship the package to me today. I catch a cold and been in and out of hospital.Now i am a little better and this is shipping to me.I will ship this out ASAP.Show Image(http://3.bp.blogspot.com/-7G90m56jgYk/VXhmwNqK9HI/AAAAAAAAAEU/EHhkXP8ZpnE/s1600/images.jpg)
(http://i.imgur.com/7tYwbta.gif)
Post by: Moistgun on Sun, 19 February 2017, 23:06:37
Only wish I got one of the kishsaver 60% limited revo cases :(
Post by: JDragon on Thu, 23 February 2017, 12:22:42
(Also, if anyone wants to trade their pink middle for a dark blue middle, let me know!)
Post by: swimmingbird on Thu, 23 February 2017, 20:48:53
Post by: RevoTeam on Thu, 23 February 2017, 23:43:20
Btw,there is also serval delay on all my orders include the keypad for massdrop. But Dr.D is my priority number one. This will be the first to ship out.
Post by: redbanshee on Fri, 24 February 2017, 00:21:56
I am sorry this is running late again. I received the package and the anode is not good enough,so i refuse the package and it send back to anode factory to redo it. I am sorry this is keep running late. But i do want to finish this one first and go on with my next project.Many of you may know i have postponed my HHKB project so i have time to do this one right. This is my first time running on GH and i want to do it right. Just want you guys to know i am doing my best to give you guys the good stuff. I am sorry it's running late but i am not going anywhere.
Btw,there is also serval delay on all my orders include the keypad for massdrop. But Dr.D is my priority number one. This will be the first to ship out.
Have you been in touch with the factory? Are the boards scheduled to be re-anodized immediately, or will it be a wait before they are re-done? A lot of us would like a realistic schedule and not a vauge non-estimate. The papal cutoff is actually an extremely big deal. Did you take pics of the boards you refused? Are there any pics at all of the cases? I would love to see any pics at all of the cases. Just please give us (me) any reason or prof the cases actually exist, i dont want to file a paypal dispute but i will with no evidence or realistic schedule.
Edit: sorry to be so up front about this, but i personally have been scammed a few times with GB's here on GH and will not be in that position again.
Post by: JDragon on Fri, 24 February 2017, 01:03:39
Also, if they're re-anodizing... is it possible to change the color of my middle section? Or too late for that.
Post by: Moistgun on Fri, 24 February 2017, 01:05:00
Post by: quochung1989 on Fri, 24 February 2017, 01:50:38
Plus one for refund/repurchase
Yes. Please
Post by: henz on Fri, 24 February 2017, 04:15:54
Plus one for refund/repurchase
Yes. Please
yes and yes.
Post by: RevoTeam on Fri, 24 February 2017, 05:18:01
I am sorry this is running late again. I received the package and the anode is not good enough,so i refuse the package and it send back to anode factory to redo it. I am sorry this is keep running late. But i do want to finish this one first and go on with my next project.Many of you may know i have postponed my HHKB project so i have time to do this one right. This is my first time running on GH and i want to do it right. Just want you guys to know i am doing my best to give you guys the good stuff. I am sorry it's running late but i am not going anywhere.
Btw,there is also serval delay on all my orders include the keypad for massdrop. But Dr.D is my priority number one. This will be the first to ship out.
Have you been in touch with the factory? Are the boards scheduled to be re-anodized immediately, or will it be a wait before they are re-done? A lot of us would like a realistic schedule and not a vauge non-estimate. The papal cutoff is actually an extremely big deal. Did you take pics of the boards you refused? Are there any pics at all of the cases? I would love to see any pics at all of the cases. Just please give us (me) any reason or prof the cases actually exist, i dont want to file a paypal dispute but i will with no evidence or realistic schedule.
Edit: sorry to be so up front about this, but i personally have been scammed a few times with GB's here on GH and will not be in that position again.
I have take a picture of the broken case before i refuse it,i can ask factory to take some photo of more cases.
there is no need to file the paypal dispute right now. i can give any prof you request.
Also, i dont know how to refund/repurchase but i'd like to do a repurchase to all of you. I have to find out how to do it or you guy can teach me.Sorry to put all of you in this position,and i really perfer you don't refund it cause i have already pay the factory.
[attachimg=1]
[attachimg=2]
Post by: RevoTeam on Fri, 24 February 2017, 05:21:09
I would appreciate a refund/repurchase option to extend buyer protection if possible. I still want the board, I'm just very hesitant to sit in GBs beyond the PayPal dispute date.how do i extend buyer protection? i'd love to do that.
Also, if they're re-anodizing... is it possible to change the color of my middle section? Or too late for that.
you can change your color now. I'd like to deliver the board.
thanks
Post by: RevoTeam on Fri, 24 February 2017, 05:31:24
I am not going to bail on this while i have so many promising boards coming.
I'd like to ask everyone to wait a couple of days to let me handle this.
thanks.
Post by: Data on Fri, 24 February 2017, 07:03:04
https://www.massdrop.com/buy/17232?mode=guest_open
I got in on the first round of this. It was delayed too, but not by more than a couple weeks. Otherwise it went well and the results are impressive. I'm sure we're all used to manufacturing delays by now. They suck ass but they're part of short-run custom products, especially considering the high quality bar we're shooting for.
Post by: redbanshee on Fri, 24 February 2017, 09:37:24
I would appreciate a refund/repurchase option to extend buyer protection if possible. I still want the board, I'm just very hesitant to sit in GBs beyond the PayPal dispute date.how do i extend buyer protection? i'd love to do that.
Also, if they're re-anodizing... is it possible to change the color of my middle section? Or too late for that.
you can change your color now. I'd like to deliver the board.
thanks
I am sorry this is running late again. I received the package and the anode is not good enough,so i refuse the package and it send back to anode factory to redo it. I am sorry this is keep running late. But i do want to finish this one first and go on with my next project.Many of you may know i have postponed my HHKB project so i have time to do this one right. This is my first time running on GH and i want to do it right. Just want you guys to know i am doing my best to give you guys the good stuff. I am sorry it's running late but i am not going anywhere.
Btw,there is also serval delay on all my orders include the keypad for massdrop. But Dr.D is my priority number one. This will be the first to ship out.
Have you been in touch with the factory? Are the boards scheduled to be re-anodized immediately, or will it be a wait before they are re-done? A lot of us would like a realistic schedule and not a vauge non-estimate. The papal cutoff is actually an extremely big deal. Did you take pics of the boards you refused? Are there any pics at all of the cases? I would love to see any pics at all of the cases. Just please give us (me) any reason or prof the cases actually exist, i dont want to file a paypal dispute but i will with no evidence or realistic schedule.
Edit: sorry to be so up front about this, but i personally have been scammed a few times with GB's here on GH and will not be in that position again.
I have take a picture of the broken case before i refuse it,i can ask factory to take some photo of more cases.
there is no need to file the paypal dispute right now. i can give any prof you request.
Also, i dont know how to refund/repurchase but i'd like to do a repurchase to all of you. I have to find out how to do it or you guy can teach me.Sorry to put all of you in this position,and i really perfer you don't refund it cause i have already pay the factory.
(Attachment Link)
(Attachment Link)
Thanks for those pics! That gives me (us) confidence that the cases actually exist! Sorry to get all up in arms, but you can relate to our concern on a $325+ keyboard, as GH GB's arent exactly known for reliability.
The refund repurchase thing goes like this: You refund the invoice amount to the buyer then you make a new invoice and the buyer repays the new invoice, effectively extending our protection another 6 months.
Post by: JDragon on Fri, 24 February 2017, 12:16:24
Post by: Unforgivable on Fri, 24 February 2017, 12:57:41
I would appreciate a refund/repurchase option to extend buyer protection if possible. I still want the board, I'm just very hesitant to sit in GBs beyond the PayPal dispute date.how do i extend buyer protection? i'd love to do that.
Also, if they're re-anodizing... is it possible to change the color of my middle section? Or too late for that.
you can change your color now. I'd like to deliver the board.
thanksI am sorry this is running late again. I received the package and the anode is not good enough,so i refuse the package and it send back to anode factory to redo it. I am sorry this is keep running late. But i do want to finish this one first and go on with my next project.Many of you may know i have postponed my HHKB project so i have time to do this one right. This is my first time running on GH and i want to do it right. Just want you guys to know i am doing my best to give you guys the good stuff. I am sorry it's running late but i am not going anywhere.
Btw,there is also serval delay on all my orders include the keypad for massdrop. But Dr.D is my priority number one. This will be the first to ship out.
Have you been in touch with the factory? Are the boards scheduled to be re-anodized immediately, or will it be a wait before they are re-done? A lot of us would like a realistic schedule and not a vauge non-estimate. The papal cutoff is actually an extremely big deal. Did you take pics of the boards you refused? Are there any pics at all of the cases? I would love to see any pics at all of the cases. Just please give us (me) any reason or prof the cases actually exist, i dont want to file a paypal dispute but i will with no evidence or realistic schedule.
Edit: sorry to be so up front about this, but i personally have been scammed a few times with GB's here on GH and will not be in that position again.
I have take a picture of the broken case before i refuse it,i can ask factory to take some photo of more cases.
there is no need to file the paypal dispute right now. i can give any prof you request.
Also, i dont know how to refund/repurchase but i'd like to do a repurchase to all of you. I have to find out how to do it or you guy can teach me.Sorry to put all of you in this position,and i really perfer you don't refund it cause i have already pay the factory.
[attachimg=1]
[attachimg=2]
Thanks for those pics! That gives me (us) confidence that the cases actually exist! Sorry to get all up in arms, but you can relate to our concern on a $325+ keyboard, as GH GB's arent exactly known for reliability.
The refund repurchase thing goes like this: You refund the invoice amount to the buyer then you make a new invoice and the buyer repays the new invoice, effectively extending our protection another 6 months.
Actually, the correct way would be for Revo to send a new invoice, allow people to pay, then refund the old original invoice. Not refunding first, then sending a new invoice.
If he refunded you first, then there's no stopping people from keeping their money for something else.
Post by: swimmingbird on Fri, 24 February 2017, 18:29:57
Actually, the correct way would be for Revo to send a new invoice, allow people to pay, then refund the old original invoice. Not refunding first, then sending a new invoice.
If he refunded you first, then there's no stopping people from keeping their money for something else.
This is all that needs to be done
After losing over $500 on the Ivan GB this is a bit of a deal breaker for me
Post by: RevoTeam on Fri, 24 February 2017, 22:08:41
I'd like to remind everyone that, while this is Revo's first GeekHack GB, it's not his first GB.
https://www.massdrop.com/buy/17232?mode=guest_open
I got in on the first round of this. It was delayed too, but not by more than a couple weeks. Otherwise it went well and the results are impressive. I'm sure we're all used to manufacturing delays by now. They suck ass but they're part of short-run custom products, especially considering the high quality bar we're shooting for.
Thanks for your understanding,Data. I have run that keypad three times and it all has a little delay cause MD is not giving me enough lead time.
This time it's mainly because workers are not wake up from holiday. The scratches are because they are careless when moving it around and putting it in the boxes.
Post by: RevoTeam on Fri, 24 February 2017, 22:20:24
Actually, the correct way would be for Revo to send a new invoice, allow people to pay, then refund the old original invoice. Not refunding first, then sending a new invoice.
If he refunded you first, then there's no stopping people from keeping their money for something else.
This is all that needs to be done
After losing over $500 on the Ivan GB this is a bit of a deal breaker for me
Anyone who want to do a repurchase can give me a pm,otherwise i am gone dealing with the anode first.I ask the factory to take a picture today. And they are redoing it as we speak.
I can show more picture when i get it. And they can start shipping it next week. I am hoping to start shipping these to you guys by next weekend.
here's some picture of redoing anode:
[attachimg=1]
[attachimg=2]
dont mind the quality of the pics,the worker only have some lame phone.
Post by: joey on Wed, 01 March 2017, 06:34:57
Post by: Data on Wed, 01 March 2017, 07:15:40
Post by: poolside on Wed, 01 March 2017, 13:34:59
Hoping for a productive week and a swift turnaround at the anodizer this week.
I am hoping for a slicky smooth finish. :cool:
Post by: JDragon on Wed, 01 March 2017, 19:53:15
Post by: Unforgivable on Wed, 01 March 2017, 21:12:04
Actually, the correct way would be for Revo to send a new invoice, allow people to pay, then refund the old original invoice. Not refunding first, then sending a new invoice.
If he refunded you first, then there's no stopping people from keeping their money for something else.
This is all that needs to be done
After losing over $500 on the Ivan GB this is a bit of a deal breaker for me
Anyone who want to do a repurchase can give me a pm,otherwise i am gone dealing with the anode first.I ask the factory to take a picture today. And they are redoing it as we speak.
I can show more picture when i get it. And they can start shipping it next week. I am hoping to start shipping these to you guys by next weekend.
here's some picture of redoing anode:
(Attachment Link)
(Attachment Link)
dont mind the quality of the pics,the worker only have some lame phone.
Sheesh, that silver looks NICE! :thumb:
Post by: Data on Mon, 06 March 2017, 12:42:05
Post by: Moistgun on Mon, 06 March 2017, 15:07:20
:) ;) :D ;D :( :-[ :-X :-\ :-* :'( >:D ^-^ :)) :cool: :confused: :mad: :rolleyes: :eek:???😕???
Post by: kokokoy on Mon, 06 March 2017, 23:02:27
Post by: RevoTeam on Tue, 07 March 2017, 04:33:04
Just bought an iron and soder wires in banggood. Hoping to receive both this month. By both I mean, those two and the board. :DYou are lucky,bro. I've shipped your order today.
[attachimg=1]
[attachimg=2]
[attachimg=3]
Post by: joey on Tue, 07 March 2017, 04:35:01
Yeeeee!Just bought an iron and soder wires in banggood. Hoping to receive both this month. By both I mean, those two and the board. :DYou are lucky,bro. I've shipped your order today.
(Attachment Link)
(Attachment Link)
(Attachment Link)
What's that hole around the position of the 'i' key?
Post by: kokokoy on Tue, 07 March 2017, 04:49:22
Just bought an iron and soder wires in banggood. Hoping to receive both this month. By both I mean, those two and the board. :DYou are lucky,bro. I've shipped your order today.
Sweeeeeet!!!! Thanks Revo!
Post by: RevoTeam on Tue, 07 March 2017, 04:50:52
Yeeeee!Just bought an iron and soder wires in banggood. Hoping to receive both this month. By both I mean, those two and the board. :DYou are lucky,bro. I've shipped your order today.
(Attachment Link)
(Attachment Link)
(Attachment Link)
What's that hole around the position of the 'i' key?
i am gonna be honest and tell you that i have no idea what is it. if you really need to know,i can ask Dr.D about it.
Post by: joey on Tue, 07 March 2017, 04:53:36
It looks like it's for a weight or something.. but there doesn't seem to be a channel for it. No rush to ask, but it would be interesting to know!Yeeeee!Just bought an iron and soder wires in banggood. Hoping to receive both this month. By both I mean, those two and the board. :DYou are lucky,bro. I've shipped your order today.
(Attachment Link)
(Attachment Link)
(Attachment Link)
What's that hole around the position of the 'i' key?
i am gonna be honest and tell you that i have no idea what is it. if you really need to know,i can ask Dr.D about it.
Post by: RevoTeam on Tue, 07 March 2017, 05:04:06
Shipping company will be select between DHL,UPS,EMS,Fedex,sf-express. All with tracking so nobody need to worry about it. It usually declare 10-20 usd. Anyone need to declare more please PM me.
i am currently PMing everybody to confirm address and ask for phone number for the shipping. I'll pm another note once your board are being shipped and provide tracking after 2 or 3 days.Tracking number will be PMed and put in Paypal.
Thank you guys for your patience and this has been a nice run for me.
Post by: joey on Tue, 07 March 2017, 05:10:18
Guys, i am shipping this slowly. Factory send me a couple of boards everyday and i am using a shipping proxy to do the shipping.Yeaaah, great news. Thanks for your hard work!
Shipping company will be select between DHL,UPS,EMS,Fedex,sf-express. All with tracking so nobody need to worry about it. It usually declare 10-20 usd. Anyone need to declare more please PM me.
i am currently PMing everybody to confirm address and ask for phone number for the shipping. I'll pm another note once your board are being shipped and provide tracking after 2 or 3 days.Tracking number will be PMed and put in Paypal.
Thank you guys for your patience and this has been a nice run for me.
Post by: RevoTeam on Tue, 07 March 2017, 05:14:09
Quote
It looks like it's for a weight or something.. but there doesn't seem to be a channel for it. No rush to ask, but it would be interesting to know!It used for anode. How can i say this... something put in the hole then into the anode,so that anode won't leave any mark on the board. Can you understand..
Post by: joey on Tue, 07 March 2017, 05:18:40
QuoteIt looks like it's for a weight or something.. but there doesn't seem to be a channel for it. No rush to ask, but it would be interesting to know!It used for anode. How can i say this... something put in the hole then into the anode,so that anode won't leave any mark on the board. Can you understand..
Ah right, I get it. The anodization happens with the boards on some kinda 'hooks' or rig. There was a post about it in kin25's thread about the tx-75.
Post by: RevoTeam on Tue, 07 March 2017, 05:22:47
Yep that's the idea.joey u r so brilliant.QuoteIt looks like it's for a weight or something.. but there doesn't seem to be a channel for it. No rush to ask, but it would be interesting to know!It used for anode. How can i say this... something put in the hole then into the anode,so that anode won't leave any mark on the board. Can you understand..
Ah right, I get it. The anodization happens with the boards on some kinda 'hooks' or rig. There was a post about it in kin25's thread about the tx-75.
Post by: Moistgun on Tue, 07 March 2017, 06:42:11
Post by: quochung1989 on Tue, 07 March 2017, 06:51:14
Post by: o3okevin on Tue, 07 March 2017, 07:40:45
Post by: Prelim on Tue, 07 March 2017, 07:43:29
Post by: Data on Tue, 07 March 2017, 09:46:34
Just bought an iron and soder wires in banggood. Hoping to receive both this month. By both I mean, those two and the board. :DYou are lucky,bro. I've shipped your order today.
(Attachment Link)
(Attachment Link)
(Attachment Link)
This looks really amazing. So excited.
Post by: JDragon on Tue, 07 March 2017, 11:17:26
Post by: odd on Tue, 07 March 2017, 18:05:23
Post by: gnmar2723 on Tue, 07 March 2017, 18:16:20
Post by: henz on Thu, 09 March 2017, 00:25:40
I can't think of anything else.
Post by: quochung1989 on Thu, 09 March 2017, 03:02:19
I got a DHL notification, might it be this?Damn it...Why I still not have :(
I can't think of anything else.
Post by: Data on Thu, 09 March 2017, 06:45:32
I got a DHL notification, might it be this?
I can't think of anything else.
(http://i.imgur.com/704wBOQ.gif)
Post by: Moistgun on Sun, 12 March 2017, 10:20:28
Post by: Data on Mon, 13 March 2017, 14:50:18
NEED
THE
D
Post by: henz on Mon, 13 March 2017, 15:41:23
Post by: quochung1989 on Mon, 13 March 2017, 21:03:08
Post by: kokokoy on Wed, 15 March 2017, 12:34:01
Will try to post some pics tom.
Post by: henz on Wed, 15 March 2017, 13:16:24
Got mine today and looks awesome. This is my first custom so I have nothing to compare against but I'm very happy with it; that's all that matters. Thanks Revo.Sweet, mine was an order from winkeyless :(
Will try to post some pics tom.
Post by: JDragon on Wed, 15 March 2017, 20:31:45
Post by: kokokoy on Wed, 15 March 2017, 21:24:46
Post by: smittysteve on Wed, 15 March 2017, 21:27:47
Before going to work. Still haven't soldered it as I'm waiting for my iron.
Dang man... that is freaking gorgeous!! Can't wait to see mine. Thanks for the pic to keep the thirst at bay.
Post by: Moistgun on Wed, 15 March 2017, 21:37:53
Before going to work. Still haven't soldered it as I'm waiting for my iron.Shiiittttt
Post by: fublamchu on Wed, 15 March 2017, 21:38:52
Post by: Unforgivable on Wed, 15 March 2017, 21:41:28
Post by: henz on Thu, 16 March 2017, 16:23:07
Before going to work. Still haven't soldered it as I'm waiting for my iron.
Mother ****er, this looks good
Post by: poolside on Sat, 18 March 2017, 18:23:22
Is the cable attached to the PCB for all Dr D boards?
They look really nice!
Yes, the design was changed to fixed cable at some point.
Post by: Moistgun on Sat, 18 March 2017, 20:14:43
Post by: swimmingbird on Sun, 19 March 2017, 18:56:59
Post by: joey on Sun, 19 March 2017, 18:58:01
Post by: hwood34 on Sun, 19 March 2017, 22:30:48
Post by: Data on Mon, 20 March 2017, 07:59:45
Post by: Data on Wed, 22 March 2017, 11:40:50
Post by: Moistgun on Fri, 24 March 2017, 18:52:17
Post by: RevoTeam on Sat, 25 March 2017, 09:03:52
Why must you torture us Raymond?Yours is sent last weekend,along with MD's keypad order,just let me find your tracking. I was so busy and i had no help.Nobody in my team understand English.You should received it next week.
Post by: RevoTeam on Sat, 25 March 2017, 09:05:30
Any updates on the shipping front?I sent out yours today,shipping agent should give me tracking on Monday or Tuesday.I'll pm you
Post by: RevoTeam on Sat, 25 March 2017, 09:12:23
BTW,i upgrade everyone's cable for free.Just like you seen from kokokoy's pic.
Post by: smittysteve on Sat, 25 March 2017, 09:16:57
Post by: Moistgun on Sat, 25 March 2017, 09:19:28
Why must you torture us Raymond?Yours is sent last weekend,along with MD's keypad order,just let me find your tracking. I was so busy and i had no help.Nobody in my team understand English.You should received it next week.
You know Im only teasing!
Thanks Rayray
Post by: Moistgun on Sat, 25 March 2017, 09:21:01
Guys,i send out orders every weekend,it's slower than i expect it.But most of the orders will be sent out in this weekend,so i could have tracking next Tuesday or Wednesday.
BTW,i upgrade everyone's cable for free.Just like you seen from kokokoy's pic.
:eek: :eek: :eek:
Post by: romevi on Sat, 25 March 2017, 09:34:51
Post by: RevoTeam on Sat, 25 March 2017, 09:42:54
Does anyone have a gray Yarbo cable they wouldn't want?there is no mini usb on that end,man. Just for Dr.D use only..... :p
Post by: RevoTeam on Sat, 25 March 2017, 09:47:40
Does anyone have a gray Yarbo cable they wouldn't want?it's like this
[attachimg=1]
Post by: romevi on Sat, 25 March 2017, 09:53:23
Does anyone have a gray Yarbo cable they wouldn't want?it's like this
(Attachment Link)
Oh, I get it now!
I wonder if there's a way to mod another PCB to use that... 🤔
Post by: RevoTeam on Sat, 25 March 2017, 09:56:28
[attachimg=1]
You can put it into pcb after assembly and put the cases together the link the longer part of the cable.
[attachimg=2]
I am not good at explaining this kind of thing,but i think you guys can get the idea.
btw, pc plate is very soft,is that right?
[attachimg=3]
Post by: romevi on Sat, 25 March 2017, 09:58:40
That sexy Yarbo look...
Post by: RevoTeam on Sat, 25 March 2017, 10:02:19
no need my friend,i can make it to mini usb or mirco usb. Let me finish this GB first,i'll pm you after i have shipped everyone's order.Does anyone have a gray Yarbo cable they wouldn't want?it's like this
(Attachment Link)
Oh, I get it now!
I wonder if there's a way to mod another PCB to use that... 🤔
Post by: romevi on Sat, 25 March 2017, 10:40:48
no need my friend,i can make it to mini usb or mirco usb. Let me finish this GB first,i'll pm you after i have shipped everyone's order.Does anyone have a gray Yarbo cable they wouldn't want?it's like this
(Attachment Link)
Oh, I get it now!
I wonder if there's a way to mod another PCB to use that... 🤔
You make my life complete.
Post by: Data on Sat, 25 March 2017, 11:51:08
Guys,i send out orders every weekend,it's slower than i expect it.But most of the orders will be sent out in this weekend,so i could have tracking next Tuesday or Wednesday.
BTW,i upgrade everyone's cable for free.Just like you seen from kokokoy's pic.
:thumb: :thumb: :thumb:
Post by: JDragon on Sat, 25 March 2017, 14:57:40
Post by: Moistgun on Sat, 25 March 2017, 15:03:51
Mine is already in Customs in NY.
:cool:
Seems like revoteam is sending them first before messaging everyone
Im okay with that.
Post by: romevi on Sat, 25 March 2017, 15:08:24
My guess is that more of these are out in the mail than we think!
Mine is already in Customs in NY.
:cool:
Seems like revoteam is sending them first before messaging everyone
Im okay with that.
Can't wait to see it.
Post by: redbanshee on Sat, 25 March 2017, 15:39:41
Guys,i send out orders every weekend,it's slower than i expect it.But most of the orders will be sent out in this weekend,so i could have tracking next Tuesday or Wednesday.
BTW,i upgrade everyone's cable for free.Just like you seen from kokokoy's pic.
so, i paid extra for a yarbo cable :confused: :confused:
Post by: Moistgun on Sat, 25 March 2017, 15:40:46
Guys,i send out orders every weekend,it's slower than i expect it.But most of the orders will be sent out in this weekend,so i could have tracking next Tuesday or Wednesday.
BTW,i upgrade everyone's cable for free.Just like you seen from kokokoy's pic.
so, i paid extra for a yarbo cable :confused: :confused:
:))
Post by: swimmingbird on Sat, 25 March 2017, 18:11:38
Awesome thanks manAny updates on the shipping front?I sent out yours today,shipping agent should give me tracking on Monday or Tuesday.I'll pm you
Sent from my SM-G935F using Tapatalk
Post by: RevoTeam on Sat, 25 March 2017, 23:14:51
Guys,i send out orders every weekend,it's slower than i expect it.But most of the orders will be sent out in this weekend,so i could have tracking next Tuesday or Wednesday.
BTW,i upgrade everyone's cable for free.Just like you seen from kokokoy's pic.
so, i paid extra for a yarbo cable :confused: :confused:
You just got one upgrade instead of two. I think it's still fair. There are so many options in this GB, my bad. It's just need more time if i upgrade it separately. At this point of this GB,i prefer to ship it sooner than lose some money,so i upgraded everyone's cable.
Post by: MMKB on Sun, 26 March 2017, 01:19:20
Just want to say cable can be separated into 2 parts like this
(Attachment Link)
You can put it into pcb after assembly and put the cases together the link the longer part of the cable.
(Attachment Link)
I am not good at explaining this kind of thing,but i think you guys can get the idea.
btw, pc plate is very soft,is that right?
(Attachment Link)
Hi Revo, this tenkeyless in your photos has a case that doesn't look like Dr. D. Could you confirm either way? Thanks!
Post by: ihalatch on Sun, 26 March 2017, 01:52:49
Just want to say cable can be separated into 2 parts like this
(Attachment Link)
You can put it into pcb after assembly and put the cases together the link the longer part of the cable.
(Attachment Link)
I am not good at explaining this kind of thing,but i think you guys can get the idea.
btw, pc plate is very soft,is that right?
(Attachment Link)
Where can I buy a cable like this one?
Post by: RevoTeam on Sun, 26 March 2017, 01:53:10
Just want to say cable can be separated into 2 parts like this
(Attachment Link)
You can put it into pcb after assembly and put the cases together the link the longer part of the cable.
(Attachment Link)
I am not good at explaining this kind of thing,but i think you guys can get the idea.
btw, pc plate is very soft,is that right?
(Attachment Link)
Hi Revo, this tenkeyless in your photos has a case that doesn't look like Dr. D. Could you confirm either way? Thanks!
No,it's not. It's something else. A GB in China,i didn't bring everything to GH cause there are too many stuffs. I only bring the better ones imo.
Post by: Moistgun on Sun, 26 March 2017, 07:18:02
AyyyyeeeeJust want to say cable can be separated into 2 parts like this
(Attachment Link)
You can put it into pcb after assembly and put the cases together the link the longer part of the cable.
(Attachment Link)
I am not good at explaining this kind of thing,but i think you guys can get the idea.
btw, pc plate is very soft,is that right?
(Attachment Link)
Hi Revo, this tenkeyless in your photos has a case that doesn't look like Dr. D. Could you confirm either way? Thanks!
No,it's not. It's something else. A GB in China,i didn't bring everything to GH cause there are too many stuffs. I only bring the better ones imo.
Post by: Moistgun on Wed, 29 March 2017, 20:34:41
Computer is not recognizing the board at all.
And im not even getting started on programming it yet.
Post by: Moistgun on Wed, 29 March 2017, 21:13:52
(http://i.imgur.com/AUS98Lo.jpg)
Post by: RevoTeam on Wed, 29 March 2017, 21:25:52
HMU if anyone knows how to use this thing. ;Dwhat happens when you plug it in？nothing？is there any sound or anything？
Computer is not recognizing the board at all.
And im not even getting started on programming it yet.
从我的 iPhone 发送，使用 Tapatalk
Post by: RevoTeam on Wed, 29 March 2017, 21:35:47
从我的 iPhone 发送，使用 Tapatalk
Post by: smittysteve on Wed, 29 March 2017, 21:38:10
i flew 4 hours to anode factory yesterday and put a all nigter. I have tracking now for 90 percent of the order. Will pm tomorrow. Need to sleep for a bit. Everyone should pm ASAP if your stuff have any problem. So i can do a change or send miss part(if there is something missing ). Revo is known for aftersales service. Cheers.
从我的 iPhone 发送，使用 Tapatalk
You rock, Raymond!! Thanks for the great shepherding of this gb!
Post by: Moistgun on Wed, 29 March 2017, 21:43:30
HMU if anyone knows how to use this thing. ;Dwhat happens when you plug it in？nothing？is there any sound or anything？
Computer is not recognizing the board at all.
And im not even getting started on programming it yet.
从我的 iPhone 发送，使用 Tapatalk
I get the windows sound when I plug it in.
Post by: Moistgun on Wed, 29 March 2017, 22:59:40
http://imgur.com/a/bWFVh
:thumb:
Post by: romevi on Wed, 29 March 2017, 23:06:50
I assume a few of you are interested in what shipping looks like.
http://imgur.com/a/bWFVh
:thumb:
Man, I want a Yarbo cable.
Also, I used to have a couch just like that.
Post by: kokokoy on Wed, 29 March 2017, 23:21:17
HMU if anyone knows how to use this thing. ;Dwhat happens when you plug it in？nothing？is there any sound or anything？
Computer is not recognizing the board at all.
And im not even getting started on programming it yet.
从我的 iPhone 发送，使用 Tapatalk
I get the windows sound when I plug it in.
Not sure if its the same thing I experienced but what i found out is the connector for the cable on the PCB (the soldered part) gets in contact with the case. It happened 3X, I disassemble it and it works then it dies down; thought it was the PCB but then placed a little tape on the square hole to avoid contact and so far never saw the issue again.
Post by: Moistgun on Thu, 30 March 2017, 00:27:48
HMU if anyone knows how to use this thing. ;Dwhat happens when you plug it in？nothing？is there any sound or anything？
Computer is not recognizing the board at all.
And im not even getting started on programming it yet.
从我的 iPhone 发送，使用 Tapatalk
I get the windows sound when I plug it in.
Not sure if its the same thing I experienced but what i found out is the connector for the cable on the PCB (the soldered part) gets in contact with the case. It happened 3X, I disassemble it and it works then it dies down; thought it was the PCB but then placed a little tape on the square hole to avoid contact and so far never saw the issue again.
Thanks for the heads up on that. I think mine had to do with ps2 drivers on my pc which fixed with a windows update!
typing on it now!
Post by: DALExSNAIL on Thu, 30 March 2017, 17:41:25
Looking to buy one of these if anyone is looking to sell. Hmu with a PM if you dont want yours :p
Post by: Moistgun on Thu, 30 March 2017, 18:25:47
Hate to be that guy.............but.............
Looking to buy one of these if anyone is looking to sell. Hmu with a PM if you dont want yours :p
Better than the guy who sells their spot months before GB is meant to ship :p
Post by: DALExSNAIL on Thu, 30 March 2017, 20:22:51
Hate to be that guy.............but.............
Looking to buy one of these if anyone is looking to sell. Hmu with a PM if you dont want yours :p
Better than the guy who sells their spot months before GB is meant to ship :p
At this point i wish I had bought from one of those guys
Post by: Moistgun on Thu, 30 March 2017, 20:25:17
(http://i.imgur.com/ajitCMS.jpg)
(http://i.imgur.com/vI5rAUo.jpg)
(http://i.imgur.com/c86fpyc.jpg)
(http://i.imgur.com/LcAIagZ.jpg)
(http://i.imgur.com/m4UERCI.jpg)
(http://i.imgur.com/2xggaK8.jpg)
(http://i.imgur.com/afnQfOs.jpg)
Post by: romevi on Thu, 30 March 2017, 21:41:04
Photography is bad, but heres a quick dump of some angle pics so you can see what the finished product looks like.Show Image(http://i.imgur.com/ajitCMS.jpg)Show Image(http://i.imgur.com/vI5rAUo.jpg)Show Image(http://i.imgur.com/c86fpyc.jpg)Show Image(http://i.imgur.com/LcAIagZ.jpg)Show Image(http://i.imgur.com/m4UERCI.jpg)Show Image(http://i.imgur.com/2xggaK8.jpg)Show Image(http://i.imgur.com/afnQfOs.jpg)
It's like staring into the face of God and living.
Post by: smittysteve on Thu, 30 March 2017, 22:00:00
Photography is bad, but heres a quick dump of some angle pics so you can see what the finished product looks like.Show Image(http://i.imgur.com/ajitCMS.jpg)Show Image(http://i.imgur.com/vI5rAUo.jpg)Show Image(http://i.imgur.com/c86fpyc.jpg)Show Image(http://i.imgur.com/LcAIagZ.jpg)Show Image(http://i.imgur.com/m4UERCI.jpg)Show Image(http://i.imgur.com/2xggaK8.jpg)Show Image(http://i.imgur.com/afnQfOs.jpg)
It's like staring into the face of God and living.
No kidding, this is a gorgeous board! Kudos Moistgun for setting the bar high on Dr. D builds!!
I need to start thinking about what to do with an orange middle in mine.
Post by: Moistgun on Thu, 30 March 2017, 22:28:05
It's like staring into the face of God and living.
No kidding, this is a gorgeous board! Kudos Moistgun for setting the bar high on Dr. D builds!!
I need to start thinking about what to do with an orange middle in mine.
Thanks Guys!
The hydro is the finality of this build so the Blue and silver is really the focus.
Thats only half the build tho for the revo.
I got a second PCB and a poly carb plate.
Gonna do lubed silent blacks on the polycarb with POM for a different feel.
The bottom row might be a little weird, but its gonna be worth it to have a really soft linear board.
^-^
Post by: Moistgun on Thu, 30 March 2017, 22:46:09
No kidding, this is a gorgeous board! Kudos Moistgun for setting the bar high on Dr. D builds!!
I need to start thinking about what to do with an orange middle in mine.
Oh. and still on the list is to figure out how to get the bootmapper client to recognize the keyboard... :))
Post by: RevoTeam on Fri, 31 March 2017, 08:51:40
Quote
Oh. and still on the list is to figure out how to get the bootmapper client to recognize the keyboard... :))
Try to link it with usb instead of ps2.And there are 2 mode. You should press u (don't let go) link your computer with usb port,or press p(don't let go) link your computer with ps2 port. When you using ps2,you should restart your computer. Try to programme it using usb mode. Let me know if it's still not working.
Post by: RevoTeam on Fri, 31 March 2017, 08:55:44
Quote
Not sure if its the same thing I experienced but what i found out is the connector for the cable on the PCB (the soldered part) gets in contact with the case. It happened 3X, I disassemble it and it works then it dies down; thought it was the PCB but then placed a little tape on the square hole to avoid contact and so far never saw the issue again.
Can you show me a photo of your taped bottom case. We use xh2.54 and it's all platisc. This never happen when i assemble mine. There shouldn't be any short. And anode alu is insulated. I am a little bit confused.
Post by: joey on Fri, 31 March 2017, 08:57:00
Is the end of the yarbo cable xh2.54? If so, I should make my PCB use that so I can use the nice cable!
Post by: Moistgun on Fri, 31 March 2017, 09:16:41
Quote
Oh. and still on the list is to figure out how to get the bootmapper client to recognize the keyboard... :))
Try to link it with usb instead of ps2.And there are 2 mode. You should press u (don't let go) link your computer with usb port,or press p(don't let go) link your computer with ps2 port. When you using ps2,you should restart your computer. Try to programme it using usb mode. Let me know if it's still not working.
Well I definitely cant recommend pressing U to any one having this issue because now my keyboard has no firmware on it.
So now, not only can I not program it, I cant type on it.
Post by: RevoTeam on Fri, 31 March 2017, 09:27:00
Quote
Well I definitely cant recommend pressing U to any one having this issue because now my keyboard has no firmware on it.
So now, not only can I not program it, I cant type on it.
Did you using the USB adaptor? If you are using it,press Q(don't let go) and then link your computer. You should be able to use bootmapper.At this point nothing can be more wrong. Or you can add my shype (raymondyy),let me see what i can do.
Post by: Moistgun on Fri, 31 March 2017, 09:28:30
Quote
Well I definitely cant recommend pressing U to any one having this issue because now my keyboard has no firmware on it.
So now, not only can I not program it, I cant type on it.
Did you using the USB adaptor? If you are using it,press Q(don't let go) and then link your computer. You should be able to use bootmapper.At this point nothing can be more wrong. Or you can add my shype (raymondyy),let me see what i can do.
Tried P using PS2 and tried U using an adapter
Ill try Q now.
Post by: Moistgun on Fri, 31 March 2017, 09:32:34
Quote
Well I definitely cant recommend pressing U to any one having this issue because now my keyboard has no firmware on it.
So now, not only can I not program it, I cant type on it.
Did you using the USB adaptor? If you are using it,press Q(don't let go) and then link your computer. You should be able to use bootmapper.At this point nothing can be more wrong. Or you can add my shype (raymondyy),let me see what i can do.
Q reset the keyboard so that is back up and running.
Post by: RevoTeam on Fri, 31 March 2017, 09:37:26
Quote
Q reset the keyboard so that is back up and running.
See if you can use bootmapper to programme it now. I don't really know about this if the problem is still there,i'll ask about it and get it back to you.
Post by: kokokoy on Fri, 31 March 2017, 09:40:24
And anode alu is insulated. I am a little bit confused.
Oh didn't know that. Then it might be another reason then. The thing is when it started not functioning back then all I need to is pull the plug disassemble plug it back without the case then it started working again. No PC restart or anything. So I thought it might be something to do with my noob soldering skills or something else.
Anyway I attached a pic of which I assume might be in contact (the 4 solder thingy), the tape would be on the case side. Can take a pic tom if you need one.
Post by: Moistgun on Fri, 31 March 2017, 09:49:52
Quote
Well I definitely cant recommend pressing U to any one having this issue because now my keyboard has no firmware on it.
So now, not only can I not program it, I cant type on it.
Did you using the USB adaptor? If you are using it,press Q(don't let go) and then link your computer. You should be able to use bootmapper.At this point nothing can be more wrong. Or you can add my shype (raymondyy),let me see what i can do.
Q reset the keyboard so that is back up and running.
holding down Tab seems to have put it into bootloader, as each keypress registers as follows
.3,1.
.3,2.
.3,3.
.3,4.
.4,1.
.4,2.
.4,3.
Thats me typing out asdfzxc
Pressing keys will now select different cells in Bootmapper
I still cannot use the download or upload buttons in Bootmapper, nor can I flash a hex file via "options"
(http://i.imgur.com/vMGf1Oz.png)
(http://i.imgur.com/vafqJ5M.png)
Post by: RevoTeam on Fri, 31 March 2017, 09:52:50
And anode alu is insulated. I am a little bit confused.
Oh didn't know that. Then it might be another reason then. The thing is when it started not functioning back then all I need to is pull the plug disassemble plug it back without the case then it started working again. No PC restart or anything. So I thought it might be something to do with my noob soldering skills or something else.
Anyway I attached a pic of which I assume might be in contact (the 4 solder thingy), the tape would be on the case side. Can take a pic tom if you need one.
Tape it should fine. Dr.D is at my side,we didn't see this coming.Sorry about this.
Post by: kokokoy on Fri, 31 March 2017, 10:00:36
And anode alu is insulated. I am a little bit confused.
Oh didn't know that. Then it might be another reason then. The thing is when it started not functioning back then all I need to is pull the plug disassemble plug it back without the case then it started working again. No PC restart or anything. So I thought it might be something to do with my noob soldering skills or something else.
Anyway I attached a pic of which I assume might be in contact (the 4 solder thingy), the tape would be on the case side. Can take a pic tom if you need one.
Tape it should fine. Dr.D is at my side,we didn't see this coming.Sorry about this.
It's totally alright man. Again love the board and waiting to see if I'll like it more with an orange mid. But looking at Moistgun pics, looks like I will. ;D
Post by: MMKB on Fri, 31 March 2017, 10:03:00
Post by: RevoTeam on Fri, 31 March 2017, 10:13:25
Hi Reymond, PM-ed you my concern about the DHL destination. It seems to be heading to my previous address which scared me a bit. Could you confirm it's heading my way? Thanks.
Just phone with shipping. will change the address tomorrow
Post by: RevoTeam on Fri, 31 March 2017, 10:24:39
Quote
holding down Tab seems to have put it into bootloader, as each keypress registers as follows
.3,1.
.3,2.
.3,3.
.3,4.
.4,1.
.4,2.
.4,3.
Thats me typing out asdfzxc
Pressing keys will now select different cells in Bootmapper
I still cannot use the download or upload buttons in Bootmapper, nor can I flash a hex file via "options"Show Image(http://i.imgur.com/vMGf1Oz.png)Show Image(http://i.imgur.com/vafqJ5M.png)
I will sort out your problem tomorrow. Dr.D and me think about everything we know and have no clue. I will ask who know tomorrow and give you the right answer :)
Post by: Moistgun on Fri, 31 March 2017, 10:26:30
No rush, as long as the board has some firmware I'm cool, just wanted to get it programmed is all. I'm happy to provide more info and screenshots if it helps troubleshooting.Quote
holding down Tab seems to have put it into bootloader, as each keypress registers as follows
.3,1.
.3,2.
.3,3.
.3,4.
.4,1.
.4,2.
.4,3.
Thats me typing out asdfzxc
Pressing keys will now select different cells in Bootmapper
I still cannot use the download or upload buttons in Bootmapper, nor can I flash a hex file via "options"Show Image(http://i.imgur.com/vMGf1Oz.png)Show Image(http://i.imgur.com/vafqJ5M.png)
I will sort out your problem tomorrow. Dr.D and me think about everything we know and have no clue. I will ask who know tomorrow and give you the right answer :)
Post by: romevi on Fri, 31 March 2017, 10:30:18
Post by: Moistgun on Fri, 31 March 2017, 14:57:19
Do you have the latest firmware?
How do you suggest that I confirm that
Post by: romevi on Fri, 31 March 2017, 15:37:41
Do you have the latest firmware?
How do you suggest that I confirm that
Download it from the WKL website. Whenever I've had a hiccup with my PCB a reflash with the newest firmware did the trick.
If you haven't found it by tonight I will look.
Post by: Moistgun on Fri, 31 March 2017, 18:01:23
Do you have the latest firmware?
How do you suggest that I confirm that
Download it from the WKL website. Whenever I've had a hiccup with my PCB a reflash with the newest firmware did the trick.
If you haven't found it by tonight I will look.
If you are referring to the latest version of Bootmapper I can check but Im almost certain I have it.
And I assume the firmware on the pcb is outdated in my situation since the bootloader button is tab as seen on past 32a bootmapper boards.
The problem with that is, whether or not the actual firmware is outdated, I still cant seem to reflash it with the newer one which has to be done in BTMppr.
Post by: Moistgun on Fri, 31 March 2017, 21:44:07
And anode alu is insulated. I am a little bit confused.
Oh didn't know that. Then it might be another reason then. The thing is when it started not functioning back then all I need to is pull the plug disassemble plug it back without the case then it started working again. No PC restart or anything. So I thought it might be something to do with my noob soldering skills or something else.
Anyway I attached a pic of which I assume might be in contact (the 4 solder thingy), the tape would be on the case side. Can take a pic tom if you need one.
Tape it should fine. Dr.D is at my side,we didn't see this coming.Sorry about this.
It's totally alright man. Again love the board and waiting to see if I'll like it more with an orange mid. But looking at Moistgun pics, looks like I will. ;D
Have you had any luck programming your keyboard?
Post by: kokokoy on Fri, 31 March 2017, 21:50:55
Have you had any luck programming your keyboard?
Mine was fine. Never had issue with the bootmapper.
Post by: Data on Fri, 31 March 2017, 23:08:07
Post by: Moistgun on Fri, 31 March 2017, 23:20:02
I know the info is out there, but I dont care.
Here you go.
From all the variations I tried, the only way I was able to program the board was using the ps2 to usb converter that revo provided.
With this adapter, I had to use a USB 2.0 port, as 3.0 wouldn't work.
When I did that, windows 10 decided to finally install Ps2avrGBU on my computer.
that is when I was able to use the bootmapper client from WKL.
http://blog.winkeyless.kr/155
When you open the client, you will click download, then change that layout as you desire, toggle bootmapper, then upload.
In that order with those specifics.
After doing this, the keyboard had my custom keymap when using the ps2 adapter to usb 2.0 and 3.0.
However, I was not able to then restart my computer with PS2 and use the keyboard.
Instead I needed to reboot holding tab, and then my keymap worked through ps2
Post by: RevoTeam on Sat, 01 April 2017, 00:02:14
从我的 iPhone 发送，使用 Tapatalk
Post by: gadzkun on Sat, 01 April 2017, 00:44:04
a little update here. My RGB 80 PCB is on the way to me now. It's a87 size so it can be use on Dr.D. Anyone in the Dr.D GB can get 10usd discount in the rgb pcb GB in the future.
从我的 iPhone 发送，使用 Tapatalk
so you will run Dr.D R2 GB with RGB PCB? :eek:
Post by: JDragon on Sat, 01 April 2017, 04:02:49
a little update here. My RGB 80 PCB is on the way to me now. It's a87 size so it can be use on Dr.D. Anyone in the Dr.D GB can get 10usd discount in the rgb pcb GB in the future.
从我的 iPhone 发送，使用 Tapatalk
I want one! Does it use SMD LEDs?
I guess I have to wait to build my board until the RGB PCB GB.
Post by: Moistgun on Sun, 02 April 2017, 10:59:00
Bonus HWS and KWK
(http://i.imgur.com/2hp7xQT.jpg)
(http://i.imgur.com/OyqZfB8.jpg)
(http://i.imgur.com/T9mFHyg.jpg)
Post by: Photoelectric on Sun, 02 April 2017, 11:20:24
Post by: romevi on Sun, 02 April 2017, 13:06:40
Finally, some nicer weather!
Bonus HWS and KWKShow Image(http://i.imgur.com/2hp7xQT.jpg)Show Image(http://i.imgur.com/OyqZfB8.jpg)Show Image(http://i.imgur.com/T9mFHyg.jpg)
I have become well moisturized.
Post by: T0mb3ry on Sun, 02 April 2017, 13:32:16
Post by: RevoTeam on Mon, 03 April 2017, 05:02:05
Finally, some nicer weather!wow this makes me wet. Great pictures man! :thumb: :thumb: :thumb:
Bonus HWS and KWKShow Image(http://i.imgur.com/2hp7xQT.jpg)Show Image(http://i.imgur.com/OyqZfB8.jpg)Show Image(http://i.imgur.com/T9mFHyg.jpg)
Post by: joey on Mon, 03 April 2017, 05:08:37
Post by: henz on Mon, 03 April 2017, 06:07:41
Post by: RevoTeam on Mon, 03 April 2017, 09:42:07
Post by: joey on Mon, 03 April 2017, 09:44:53
Everyone receiving your orders should check your board ASAP. If there are missing part or ding please PM ASAP. My package should be fine,but when it comes to international shipping nothing can be certain.I got 2 more waiting for shipping and 2 waiting for tracking numbers then this GB will be closed. Next step is after-sales service. After everyone received their and make sure everything is all right.Then i'll sell what's left of this GB. Dr.D R2 is something i am not sure,will depend on the demand.I think I might be missing a plate, unless there are two plates in the assembled board somehow..
Going to do a full check when I get home.
Happy this has finally come through, thanks a lot! :thumb:
Post by: RevoTeam on Mon, 03 April 2017, 10:07:00
Quote
I think I might be missing a plate, unless there are two plates in the assembled board somehow..Oh, your pink partial plate is missing. It's been remaking now,ill send that later. Did i not tell you that in your tracking number pm? No worries,just need a couple of days.
Going to do a full check when I get home.
Happy this has finally come through, thanks a lot! :thumb:
Post by: KatzenKinder on Mon, 03 April 2017, 11:37:38
(http://i.imgur.com/7APmPDN.jpg)
(http://i.imgur.com/E0d3AJi.jpg)
Post by: Moistgun on Mon, 03 April 2017, 11:38:52
Mine arrived! Packaging was 10/10, nice foam shell for the board to keep it secure.Nice Katz.Show Image(http://i.imgur.com/7APmPDN.jpg)Show Image(http://i.imgur.com/E0d3AJi.jpg)
What side color did you go with?
Post by: KatzenKinder on Mon, 03 April 2017, 11:40:07
Mine arrived! Packaging was 10/10, nice foam shell for the board to keep it secure.Nice Katz.Show Image(http://i.imgur.com/7APmPDN.jpg)Show Image(http://i.imgur.com/E0d3AJi.jpg)
What side color did you go with?
Same gray as outer, only wanted the red to show through under caps
Post by: Moistgun on Mon, 03 April 2017, 11:46:30
Mine arrived! Packaging was 10/10, nice foam shell for the board to keep it secure.Nice Katz.Show Image(http://i.imgur.com/7APmPDN.jpg)Show Image(http://i.imgur.com/E0d3AJi.jpg)
What side color did you go with?
Same gray as outer, only wanted the red to show through under caps
Sick
I'm excited to see some other colors out there!
Post by: Unforgivable on Mon, 03 April 2017, 12:24:29
Mine arrived! Packaging was 10/10, nice foam shell for the board to keep it secure.Show Image(http://i.imgur.com/7APmPDN.jpg)Show Image(http://i.imgur.com/E0d3AJi.jpg)
Geez, this looks awesome. I hope he has more full Greys!
Post by: RevoTeam on Mon, 03 April 2017, 12:34:39
Mine arrived! Packaging was 10/10, nice foam shell for the board to keep it secure.great pictures man! I am doing a better packing box now. This one is one time use only :thumb: :thumb: :thumb: Just happy to see you got it all safe and sound.Show Image(http://i.imgur.com/7APmPDN.jpg)Show Image(http://i.imgur.com/E0d3AJi.jpg)
Post by: MMKB on Mon, 03 April 2017, 13:39:04
Post by: joey on Mon, 03 April 2017, 13:40:52
Nope, but thanks for telling me now :thumb:QuoteI think I might be missing a plate, unless there are two plates in the assembled board somehow..Oh, your pink partial plate is missing. It's been remaking now,ill send that later. Did i not tell you that in your tracking number pm? No worries,just need a couple of days.
Going to do a full check when I get home.
Happy this has finally come through, thanks a lot! :thumb:
I have something odd with my plate, I'll try get some photos.
Can it wait until the weekend? Then I'll have more time to inspect properly.
Post by: Photoelectric on Mon, 03 April 2017, 13:40:56
Looking at the picture of the plate. Am I supposed to use plate mount stabilizers for Dr.D? About to get mine this Wednesday!! ;D ;D
PCB-mount ones should work: https://geekhack.org/index.php?topic=84328.msg2383279#msg2383279
Post by: smittysteve on Mon, 03 April 2017, 13:49:05
http://imgur.com/a/3l0da (http://imgur.com/a/3l0da)
That freaking D though. Holy smokes. No idea whether I'll roll with the orange D or grey D- both are pretty slick looking.
The anodization came out a little more red-orange than the Bronco orange I was hoping for, but it looks sick. Raymond, I know you mentioned this wasn't quite as you had hoped either, but I'm thrilled!! Raymond/ Revo/ Dr. D- thanks much to you all, this has been a great GB and Dr. D is definitely going to be a well-loved keyboard once it's all built up. My Siskel and Ebert rating: :thumb: :thumb: :thumb: :thumb: :thumb:
Post by: MMKB on Mon, 03 April 2017, 13:54:46
Looking at the picture of the plate. Am I supposed to use plate mount stabilizers for Dr.D? About to get mine this Wednesday!! ;D ;D
PCB-mount ones should work: https://geekhack.org/index.php?topic=84328.msg2383279#msg2383279
Thanks! So both PCB-mount and plate-mount should work?
Post by: Moistgun on Mon, 03 April 2017, 13:57:22
Looking at the picture of the plate. Am I supposed to use plate mount stabilizers for Dr.D? About to get mine this Wednesday!! ;D ;D
PCB-mount ones should work: https://geekhack.org/index.php?topic=84328.msg2383279#msg2383279
Thanks! So both PCB-mount and plate-mount should work?
I used PCB mount stabs
Post by: Moistgun on Mon, 03 April 2017, 13:58:05
Had a wonderful delivery today at the office. MAN, I already love this thing.
http://imgur.com/a/3l0da (http://imgur.com/a/3l0da)
That freaking D though. Holy smokes. No idea whether I'll roll with the orange D or grey D- both are pretty slick looking.
The anodization came out a little more red-orange than the Bronco orange I was hoping for, but it looks sick. Raymond, I know you mentioned this wasn't quite as you had hoped either, but I'm thrilled!! Raymond/ Revo/ Dr. D- thanks much to you all, this has been a great GB and Dr. D is definitely going to be a well-loved keyboard once it's all built up. My Siskel and Ebert rating: :thumb: :thumb: :thumb: :thumb: :thumb:
That looks great man!
Grats!
Post by: MMKB on Mon, 03 April 2017, 13:59:10
Had a wonderful delivery today at the office. MAN, I already love this thing.
http://imgur.com/a/3l0da (http://imgur.com/a/3l0da)
That freaking D though. Holy smokes. No idea whether I'll roll with the orange D or grey D- both are pretty slick looking.
The anodization came out a little more red-orange than the Bronco orange I was hoping for, but it looks sick. Raymond, I know you mentioned this wasn't quite as you had hoped either, but I'm thrilled!! Raymond/ Revo/ Dr. D- thanks much to you all, this has been a great GB and Dr. D is definitely going to be a well-loved keyboard once it's all built up. My Siskel and Ebert rating: :thumb: :thumb: :thumb: :thumb: :thumb:
Color combination done right. The plate and mid case look like they are of one solid piece. :eek: :eek: :eek:
Post by: poolside on Mon, 03 April 2017, 16:51:31
Finally, some nicer weather!This board looks hot! :thumb:
Bonus HWS and KWKShow Image(http://i.imgur.com/2hp7xQT.jpg)Show Image(http://i.imgur.com/OyqZfB8.jpg)Show Image(http://i.imgur.com/T9mFHyg.jpg)
Photography is bad, but heres a quick dump of some angle pics so you can see what the finished product looks like.(http://i.imgur.com/m4UERCIm.jpg)
This one is my favorite picture of that keyboard, featuring all of those nice inclined surfaces.
Had a wonderful delivery today at the office. MAN, I already love this thing.
http://imgur.com/a/3l0da (http://imgur.com/a/3l0da)
That freaking D though. Holy smokes. No idea whether I'll roll with the orange D or grey D- both are pretty slick looking.
The anodization came out a little more red-orange than the Bronco orange I was hoping for, but it looks sick. Raymond, I know you mentioned this wasn't quite as you had hoped either, but I'm thrilled!! Raymond/ Revo/ Dr. D- thanks much to you all, this has been a great GB and Dr. D is definitely going to be a well-loved keyboard once it's all built up. My Siskel and Ebert rating: :thumb: :thumb: :thumb: :thumb: :thumb:
In your pictures, the D logo looks like it sits in a similarly D-shaped cut so that it is flush with the case. Looking at the prototype pictures I thought it would just be sticked onto the top half of the case.
This is great, it looks more refined that way. :thumb:
Post by: Moistgun on Mon, 03 April 2017, 17:50:49
Finally, some nicer weather!This board looks hot! :thumb:
Bonus HWS and KWKShow Image(http://i.imgur.com/2hp7xQT.jpg)Show Image(http://i.imgur.com/OyqZfB8.jpg)Show Image(http://i.imgur.com/T9mFHyg.jpg)
Thank you :*Photography is bad, but heres a quick dump of some angle pics so you can see what the finished product looks like.Show Image(http://i.imgur.com/m4UERCIm.jpg)
This one is my favorite picture of that keyboard, featuring all of those nice inclined surfaces.
I Agree, I tried to get a few good angle pics so you can see what this board is made of.Had a wonderful delivery today at the office. MAN, I already love this thing.
http://imgur.com/a/3l0da (http://imgur.com/a/3l0da)
That freaking D though. Holy smokes. No idea whether I'll roll with the orange D or grey D- both are pretty slick looking.
The anodization came out a little more red-orange than the Bronco orange I was hoping for, but it looks sick. Raymond, I know you mentioned this wasn't quite as you had hoped either, but I'm thrilled!! Raymond/ Revo/ Dr. D- thanks much to you all, this has been a great GB and Dr. D is definitely going to be a well-loved keyboard once it's all built up. My Siskel and Ebert rating: :thumb: :thumb: :thumb: :thumb: :thumb:
In your pictures, the D logo looks like it sits in a similarly D-shaped cut so that it is flush with the case. Looking at the prototype pictures I thought it would just be sticked onto the top half of the case.
This is great, it looks more refined that way. :thumb:
I was surprised in the same way about the D.
I didn't know it was going to be flush!
Post by: Moistgun on Mon, 03 April 2017, 18:14:40
Post by: RevoTeam on Mon, 03 April 2017, 22:07:38
Looking at the picture of the plate. Am I supposed to use plate mount stabilizers for Dr.D? About to get mine this Wednesday!! ;D ;Dpcb mount stabs.my friend
从我的 iPhone 发送，使用 Tapatalk
Post by: RevoTeam on Mon, 03 April 2017, 22:08:43
sure just pm me pictures of problem onesNope, but thanks for telling me now :thumb:QuoteI think I might be missing a plate, unless there are two plates in the assembled board somehow..Oh, your pink partial plate is missing. It's been remaking now,ill send that later. Did i not tell you that in your tracking number pm? No worries,just need a couple of days.
Going to do a full check when I get home.
Happy this has finally come through, thanks a lot! :thumb:
I have something odd with my plate, I'll try get some photos.
Can it wait until the weekend? Then I'll have more time to inspect properly.
从我的 iPhone 发送，使用 Tapatalk
Post by: Data on Tue, 04 April 2017, 07:48:22
Snapped a couple quick photos before putting it away. I'll assemble it this weekend.
(http://i.imgur.com/h1KsbgR.jpg?1)
(http://i.imgur.com/Up69UyR.jpg?1)
I guess silver & blue was a popular option. :D
Post by: poolside on Tue, 04 April 2017, 16:09:11
I received my order yesterday and opened it briefly for inspection. It's absolutely flawless. Perfection. I was blown away by the feel of it.
Snapped a couple quick photos before putting it away. I'll assemble it this weekend.Show Image(http://i.imgur.com/h1KsbgR.jpg?1)Show Image(http://i.imgur.com/Up69UyR.jpg?1)
I guess silver & blue was a popular option. :D
Interesting, the D actually appears to be a screw-in part.
Post by: gadzkun on Tue, 04 April 2017, 18:47:00
nice looking board all :thumb:
Post by: RevoTeam on Wed, 05 April 2017, 01:18:41
Post by: MMKB on Wed, 05 April 2017, 01:34:19
Thank you Raymond and the Revo team! This GB is nothing but a huge success. Even though I have to change my address after shipping, Raymond and DHL were easy to work with and responding really quickly.
Post by: boo on Wed, 05 April 2017, 03:34:39
I have 2 WKL no logo boards now,someone haven't been able to pay for it.It haven't been anode yet. I am selling them now cause he can't pay for it and i have to cover some shipping cost. Anyone want them can PM me. I am selling it at $300+shipping+pp fee.
What do you mean no anode? so just bare metal?
Post by: joey on Wed, 05 April 2017, 03:44:44
Sounds like he's saying the person picking up the boards can choose the colour, because they're not anodized yet? Just a guess :blank:I have 2 WKL no logo boards now,someone haven't been able to pay for it.It haven't been anode yet. I am selling them now cause he can't pay for it and i have to cover some shipping cost. Anyone want them can PM me. I am selling it at $300+shipping+pp fee.
What do you mean no anode? so just bare metal?
Post by: kokokoy on Wed, 05 April 2017, 03:48:28
*edit: too slow, joey beat me to it.
Post by: RevoTeam on Wed, 05 April 2017, 04:07:15
从我的 iPhone 发送，使用 Tapatalk
Post by: gadzkun on Wed, 05 April 2017, 05:56:12
yes no anode means waiting for new buyer to choose color. Btw the price is 300 and shipping will be 50. Actually i lost a lot of money for shipping. It cost more than i expected.
从我的 iPhone 发送，使用 Tapatalk
PM.ed :thumb:
btw is it include YARBO cabble ? i want yarbooooo :p
Post by: RevoTeam on Wed, 05 April 2017, 06:33:34
Post by: RevoTeam on Wed, 05 April 2017, 06:34:31
yes no anode means waiting for new buyer to choose color. Btw the price is 300 and shipping will be 50. Actually i lost a lot of money for shipping. It cost more than i expected.
从我的 iPhone 发送，使用 Tapatalk
PM.ed :thumb:
btw is it include YARBO cabble ? i want yarbooooo :p
Yes,it include Yarbo cable.
Post by: DALExSNAIL on Wed, 05 April 2017, 07:19:42
I missed the boards selling
Kill me fam
I need one
Post by: RevoTeam on Wed, 05 April 2017, 09:26:44
Just got mine too. Grey case with black plate. The build quality and precision is insane!
Thank you Raymond and the Revo team! This GB is nothing but a huge success. Even though I have to change my address after shipping, Raymond and DHL were easy to work with and responding really quickly.
I just saw this. This is beautiful Khylnn. Did DHL charge you anything?If so you can forward it to me. Happy to see you got it in one piece.LOL
Post by: dgneo on Wed, 05 April 2017, 09:34:41
I have 2 WKL no logo boards now,someone haven't been able to pay for it.It haven't been anode yet. I am selling them now cause he can't pay for it and i have to cover some shipping cost. Anyone want them can PM me. I am selling it at $300+shipping+pp fee.
noooooooooooooooooooooooooooo can't believe i missed this :(
Post by: Moistgun on Wed, 05 April 2017, 12:16:18
Post by: T0mb3ry on Thu, 06 April 2017, 11:14:39
(http://i.imgur.com/vVElimC.jpg)
(http://i.imgur.com/kHD16GR.jpg)
(http://i.imgur.com/HfZ8A0r.jpg)
(http://i.imgur.com/ShiRRgb.jpg)
.
.
.
Roll the credits...
Post by: romevi on Thu, 06 April 2017, 12:35:03
Post by: RevoTeam on Thu, 06 April 2017, 22:29:11
beautiful！i love it！Show Image(http://i.imgur.com/aCB4Z4a.jpg)Show Image(http://i.imgur.com/vVElimC.jpg)Show Image(http://i.imgur.com/kHD16GR.jpg)Show Image(http://i.imgur.com/HfZ8A0r.jpg)Show Image(http://i.imgur.com/ShiRRgb.jpg)
.
.
.
Roll the credits...
从我的 iPhone 发送，使用 Tapatalk
Post by: quochung1989 on Thu, 06 April 2017, 23:16:26
Show Image(http://i.imgur.com/aCB4Z4a.jpg)Show Image(http://i.imgur.com/vVElimC.jpg)Show Image(http://i.imgur.com/kHD16GR.jpg)Show Image(http://i.imgur.com/HfZ8A0r.jpg)Show Image(http://i.imgur.com/ShiRRgb.jpg)
.
.
.
Roll the credits...
It's blue or gray?
Post by: RevoTeam on Thu, 06 April 2017, 23:38:44
Quote
It's blue or gray?
I think it's all blue
Post by: MMKB on Thu, 06 April 2017, 23:42:24
Show Image(http://i.imgur.com/aCB4Z4a.jpg)Show Image(http://i.imgur.com/vVElimC.jpg)Show Image(http://i.imgur.com/kHD16GR.jpg)Show Image(http://i.imgur.com/HfZ8A0r.jpg)Show Image(http://i.imgur.com/ShiRRgb.jpg)
.
.
.
Roll the credits...
Can I call that Yuri-themed?
Post by: RevoTeam on Thu, 06 April 2017, 23:44:51
Quote
Can I call that Yuri-themed?
Eh.. since no one oreder a deep blue for Yuri make this a truth Yuri-theme. I think
Post by: kokokoy on Fri, 07 April 2017, 01:31:40
Roll the credits...
I'm not a fan of blue but man that looks absolutely gorgeous!
Post by: T0mb3ry on Fri, 07 April 2017, 11:54:30
Roll the credits...
I'm not a fan of blue but man that looks absolutely gorgeous!
Thanks! :) Though i dont know which switches. :rolleyes: I think vintage black but i need to try new ones. Though they might be as good as vintage ones but with greater ressources.
Post by: Moistgun on Fri, 07 April 2017, 12:38:43
Second Revo.
The Polycarb is sick.
When you have caps on the board, and look down at the board, you can see your reflection.
Post by: joey on Fri, 07 April 2017, 12:42:24
Show Image(http://i.imgur.com/oWbTlTS.jpg)
Second Revo.
The Polycarb is sick.
When you have caps on the board, and look down at the board, you can see your reflection.
How is the polycarb feel wise?
Post by: Photoelectric on Fri, 07 April 2017, 12:44:01
Post by: Moistgun on Fri, 07 April 2017, 13:45:41
Show Image(http://i.imgur.com/oWbTlTS.jpg)
Second Revo.
The Polycarb is sick.
When you have caps on the board, and look down at the board, you can see your reflection.
How is the polycarb feel wise?
Its really nice.
Im using blacks obviously, but its really soft.
gonna put some dyesubs on it for better soft feels
Post by: odd on Fri, 07 April 2017, 14:57:47
;)
Post by: Moistgun on Fri, 07 April 2017, 15:01:47
This is killing me. This is my first custom TKL, I keep checking my inbox for shipping info but nothing yet argggg!!!
;)
Its coming bro just a lil longer
Post by: RevoTeam on Fri, 07 April 2017, 17:27:56
This is killing me. This is my first custom TKL, I keep checking my inbox for shipping info but nothing yet argggg!!!Yours in on the way to Shipping,it's coming. Don't worries
;)
Post by: RevoTeam on Fri, 07 April 2017, 17:28:55
Show Image(http://i.imgur.com/oWbTlTS.jpg)
Second Revo.
The Polycarb is sick.
When you have caps on the board, and look down at the board, you can see your reflection.
Those are fantastic pictures M !really great!
Post by: quochung1989 on Fri, 07 April 2017, 18:13:19
Show Image(http://i.imgur.com/oWbTlTS.jpg)
Second Revo.
The Polycarb is sick.
When you have caps on the board, and look down at the board, you can see your reflection.
Nice shot! Why do you need MX Lock for Scroll Lock key?
Post by: Moistgun on Fri, 07 April 2017, 18:26:32
Show Image(http://i.imgur.com/oWbTlTS.jpg)
Second Revo.
The Polycarb is sick.
When you have caps on the board, and look down at the board, you can see your reflection.
Nice shot! Why do you need MX Lock for Scroll Lock key?
I dont use scroll lock in my keyboards.
So with the lock switch Its in a place that is out of the way, so I can leave it depressed and out of the way.
I use it currently to make a NULL layer.
As in, if the key is pressed down, it will not output any keycodes.
Makes it sort of like a physical lock so that people cant use my keyboard at work.
Another option is to set it to be colemak swap layer.
Post by: Moistgun on Fri, 07 April 2017, 18:28:34
Show Image(http://i.imgur.com/oWbTlTS.jpg)
Second Revo.
The Polycarb is sick.
When you have caps on the board, and look down at the board, you can see your reflection.
Those are fantastic pictures M !really great!
Thank you Revoteam :D
Post by: quochung1989 on Fri, 07 April 2017, 18:34:37
Show Image(http://i.imgur.com/oWbTlTS.jpg)
Second Revo.
The Polycarb is sick.
When you have caps on the board, and look down at the board, you can see your reflection.
Nice shot! Why do you need MX Lock for Scroll Lock key?
I dont use scroll lock in my keyboards.
So with the lock switch Its in a place that is out of the way, so I can leave it depressed and out of the way.
I use it currently to make a NULL layer.
As in, if the key is pressed down, it will not output any keycodes.
Makes it sort of like a physical lock so that people cant use my keyboard at work.
Another option is to set it to be colemak swap layer.
Ah ha. I see. Thanks for explaining.
Post by: Draic on Sun, 09 April 2017, 10:31:33
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
Post by: Moistgun on Sun, 09 April 2017, 10:35:48
I joinged the drop of the Revo Keypad recently (https://www.massdrop.com/buy/revo-design-custom-cnc-aluminum-keypad/).This gb is already over and no issues have been shown by any recipients.
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
Post by: RevoTeam on Sun, 09 April 2017, 11:10:51
I joinged the drop of the Revo Keypad recently (https://www.massdrop.com/buy/revo-design-custom-cnc-aluminum-keypad/).
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
First, i do have a warranty and this can be replaced.
I have to tell you this. I will never send out this kind of product. This one is too obvious to ignore it. It won't pass the factory's QC let alone mine. It seems it meet strong base or something. It could be something happened by shipping.
And i am just wondering why you have to go out like this, why don't you just contact me first and sort this out. I am replacing bad parts for this GB as well. You can ask around and people can tell you that i am easy to work with. Show me what's bad and i will replace it. I am not someone you can't reason with.
Post by: Data on Sun, 09 April 2017, 21:03:17
Post by: MMKB on Mon, 10 April 2017, 00:04:45
Post by: Moistgun on Mon, 10 April 2017, 00:06:45
Built it last night and couldn't be happier with the result. MacBook-level anodization and construction.Beautiful!!!
Is that silver?
Post by: MMKB on Mon, 10 April 2017, 00:23:56
Built it last night and couldn't be happier with the result. MacBook-level anodization and construction.Beautiful!!!
Is that silver?
It's grey. But I get that my other silver Revo numpad does look grey under certain lighting.
This one looks like the dark grey MacBook Pro of last year.
Post by: JDragon on Mon, 10 April 2017, 02:37:17
Maybe I'll join the HHKB buy to distract myself. :D
Post by: Data on Mon, 10 April 2017, 11:06:02
(http://i.imgur.com/dszJlFE.jpg?1)
(http://i.imgur.com/a0h8cyF.jpg?2)
67g Zealios
Clear "Zealstabs"
GMK Skeletor
It's an absolute joy to type on.
Post by: Kafka on Mon, 10 April 2017, 11:09:41
Looks amazing, did you lube the stabs btw?Show Image(http://i.imgur.com/SaW1JIi.jpg?1)Show Image(http://i.imgur.com/dszJlFE.jpg?1)Show Image(http://i.imgur.com/a0h8cyF.jpg?2)
67g Zealios
Clear "Zealstabs"
GMK Skeletor
It's an absolute joy to type on.
Sent from my iPhone using Tapatalk
Post by: Data on Mon, 10 April 2017, 11:11:44
Looks amazing, did you lube the stabs btw?Show Image(http://i.imgur.com/SaW1JIi.jpg?1)Show Image(http://i.imgur.com/dszJlFE.jpg?1)Show Image(http://i.imgur.com/a0h8cyF.jpg?2)
67g Zealios
Clear "Zealstabs"
GMK Skeletor
It's an absolute joy to type on.
Sent from my iPhone using Tapatalk
Thanks, it is.
I never lube my stabs but I honestly don't think it'd even be necessary with these. They're like butter.
Post by: Delirious on Mon, 10 April 2017, 11:20:29
Show Image(http://i.imgur.com/SaW1JIi.jpg?1)Show Image(http://i.imgur.com/dszJlFE.jpg?1)Show Image(http://i.imgur.com/a0h8cyF.jpg?2)
67g Zealios
Clear "Zealstabs"
GMK Skeletor
It's an absolute joy to type on.
With so many of us in Orlando, planning a mini meetup would be cool. I would love to try out the Revo
Post by: xondat on Mon, 10 April 2017, 11:26:06
Show Image(http://i.imgur.com/SaW1JIi.jpg?1)Show Image(http://i.imgur.com/dszJlFE.jpg?1)Show Image(http://i.imgur.com/a0h8cyF.jpg?2)
67g Zealios
Clear "Zealstabs"
GMK Skeletor
It's an absolute joy to type on.
Pretty board. Makes the caps look good too, as I'm not keen on those.
Post by: Data on Mon, 10 April 2017, 11:56:19
Show Image(http://i.imgur.com/SaW1JIi.jpg?1)Show Image(http://i.imgur.com/dszJlFE.jpg?1)Show Image(http://i.imgur.com/a0h8cyF.jpg?2)
67g Zealios
Clear "Zealstabs"
GMK Skeletor
It's an absolute joy to type on.
Pretty board. Makes the caps look good too, as I'm not keen on those.
Skeletor goes pretty well with silver but I'm thinking the blue trim clashes with it a little. I kinda regret getting the blue now. Grey would have been the safer choice. Oh well, live & learn.
Post by: odd on Mon, 10 April 2017, 18:31:14
Everyone receiving your orders should check your board ASAP. If there are missing part or ding please PM ASAP. My package should be fine,but when it comes to international shipping nothing can be certain.I got 2 more waiting for shipping and 2 waiting for tracking numbers then this GB will be closed. Next step is after-sales service. After everyone received their and make sure everything is all right.Then i'll sell what's left of this GB. Dr.D R2 is something i am not sure,will depend on the demand.
I hope im one of those 4 as i have yet to get any tracking or shipping info from you except for the tease pm you sent me a few weeks ago :(
Post by: Rodgaroon on Thu, 13 April 2017, 20:09:37
Post by: romevi on Mon, 17 April 2017, 21:16:30
Show Image(http://i.imgur.com/SaW1JIi.jpg?1)Show Image(http://i.imgur.com/dszJlFE.jpg?1)Show Image(http://i.imgur.com/a0h8cyF.jpg?2)
67g Zealios
Clear "Zealstabs"
GMK Skeletor
It's an absolute joy to type on.
Mmm... I love the D.
Post by: Data on Tue, 18 April 2017, 06:30:04
Show Image(http://i.imgur.com/SaW1JIi.jpg?1)Show Image(http://i.imgur.com/dszJlFE.jpg?1)Show Image(http://i.imgur.com/a0h8cyF.jpg?2)
67g Zealios
Clear "Zealstabs"
GMK Skeletor
It's an absolute joy to type on.
Mmm... I love the D.
The D is glee.
Post by: JDragon on Sat, 22 April 2017, 21:07:06
(http://i.imgur.com/YBgPx04.jpg)
(http://i.imgur.com/rRTzZd4.jpg)
(http://i.imgur.com/fWMTaDl.jpg)
Lubed 65g Vintage Cherry MX Black Stems in Zealios Housings
Zeal Gold Stabilizers
JTK Sophomore Keycaps
Post by: Data on Sat, 22 April 2017, 23:28:35
Post by: catweewee on Wed, 26 April 2017, 09:38:49
(http://i.imgur.com/7afK3Qc.jpg)
Raymond, you did really good work. The revo TKL is beautiful. Good anodizing and a very very fair price. I'm glad I got in on this.
Post by: smittysteve on Wed, 26 April 2017, 09:43:15
My turn.Show Image(http://i.imgur.com/7afK3Qc.jpg)
Raymond, you did really good work. The revo TKL is beautiful. Good anodizing and a very very fair price. I'm glad I got in on this.
Great looking build!! The pink ano is just sexy- great call on this one.
Post by: odd on Sun, 30 April 2017, 07:12:07
(http://i.imgur.com/B3bnXz3.jpg)
Post by: Moistgun on Sun, 07 May 2017, 10:20:47
(The accent color portion)
:)
Post by: redbanshee on Fri, 26 May 2017, 10:55:45
(http://imgur.com/cEylLvz.jpg)
Post by: Moistgun on Fri, 26 May 2017, 12:28:20
http://imgur.com/a/JVmXL <----------massive build albumShow Image(http://imgur.com/cEylLvz.jpg)
Hot Dog
Post by: gnmar2723 on Fri, 26 May 2017, 19:59:53
http://imgur.com/a/JVmXL <----------massive build albumShow Image(http://imgur.com/cEylLvz.jpg)
Hot damn that is one stunning board. The Yarbo cable is the icing on top too.
Post by: quochung1989 on Thu, 13 July 2017, 22:50:01
If you interested it, please pm me. Thanks!
Post by: gr4v3m4n on Sun, 16 July 2017, 03:57:38
Post by: poolside on Sun, 16 July 2017, 04:34:49
is this gb still running?? coz the order form is still open.
This one had ended, but you can vote for round 2 here: https://geekhack.org/index.php?topic=90591
5, Dr.D R2
I dont have pictures for this one. We had a talk about it to make Dr.D R2. It will have a PC middle layer and a RGB pcb and some changes.
Well,please vote here: https://goo.gl/forms/Li4MdklzBlG1Kgjh2
Post by: RevoTeam on Mon, 31 July 2017, 00:07:54
1,Black-red-black winkeyless layout. Silver+red plate,pcb,yabro cable.
2,Silver-blue-silver winkey layout Silver+gery plate,pcb,yabro cable
price:
360usd include everything(shipping,paypal fees) Both of them are same price.
Post by: Prelim on Tue, 01 August 2017, 11:27:08
Post by: redbanshee on Tue, 01 August 2017, 11:29:08
ISO compatible?
Nope
Post by: Trente on Mon, 16 October 2017, 14:22:49
Post by: JDragon on Mon, 16 October 2017, 17:00:11
Just curious if any one has extra PCB want to sell to me or if any one know what other PCB is compatible for this case?
I have an extra PCB (and an extra plate/side piece if you need those), located in the US. PM me if interested.
Post by: Trente on Tue, 17 October 2017, 15:08:07
Just curious if any one has extra PCB want to sell to me or if any one know what other PCB is compatible for this case?
I have an extra PCB (and an extra plate/side piece if you need those), located in the US. PM me if interested.
Gotcha，PMed
Post by: T0mb3ry on Sat, 25 November 2017, 07:21:37
Its not a biggy if the ps/2 interface is just for aesthetics. Tho if there is a away to make Dr.D to work through ps/2 i would love to know how to make this happen.
My Dr.D works with USB adapter just fine but i would love to use it through ps/2 interface.
Post by: Puddsy on Sat, 25 November 2017, 10:35:30
Remember, PS/2 isn't hotswappable. You have to restart your PC first.
Post by: ya23za on Tue, 06 March 2018, 16:14:25
where to find this
https://imgur.com/a/3lTqu
Post by: Puddsy on Tue, 06 March 2018, 16:18:48
HI
where to find this
https://imgur.com/a/3lTqu
mechmarket or classifieds
Post by: ya23za on Wed, 07 March 2018, 04:05:22
Post by: gr4v3m4n on Wed, 07 March 2018, 04:34:45
sorry I'm a newbie here, what you mean? is it a site or a category in the forum?mechmarket is a subreddit and classified is a subforum here on geekhack
Sent from my iPhone using Tapatalk
Post by: xondat on Wed, 07 March 2018, 05:54:59
sorry I'm a newbie here, what you mean? is it a site or a category in the forum?
Classified is a subforum on this forum, you need 25 posts to make a buying thread for yourself, so for now you can just browse it and hope someone lists one.
https://geekhack.org/index.php?board=59.0
mechmarket is a subreddit on reddit, think there are some requirements there but I think it's a lower entry anyway.
https://www.reddit.com/r/mechmarket/
Post by: ya23za on Wed, 07 March 2018, 16:22:37
sorry I'm a newbie here, what you mean? is it a site or a category in the forum?mechmarket is a subreddit and classified is a subforum here on geekhack
Sent from my iPhone using Tapatalk
many thanks
Post by: ya23za on Wed, 07 March 2018, 16:23:33
sorry I'm a newbie here, what you mean? is it a site or a category in the forum?
Classified is a subforum on this forum, you need 25 posts to make a buying thread for yourself, so for now you can just browse it and hope someone lists one.
https://geekhack.org/index.php?board=59.0
mechmarket is a subreddit on reddit, think there are some requirements there but I think it's a lower entry anyway.
https://www.reddit.com/r/mechmarket/
THANKS DUDE
Post by: Prelim on Wed, 12 December 2018, 16:00:18
Post by: quochung1989 on Thu, 13 December 2018, 07:20:03
is there any pcb ISO compatible that can be used with this?
I tested B87 clone pcb, it's fully fit with Revo & Dr.D keyboard. But you can't use mini USB port with Revo, you need a modification.
I got pcb from local store. I think you can find it on taobao (Someone on mechmarket bought it on taobao).
Good luck!
Post by: C³—Ears on Thu, 13 December 2018, 08:27:03
Does the keyboard support ps/2 interface or is the ps/2 Yarbo cable just for the aesthetics? Just wanted to use Dr.D with ps/2 interface however its not recognized. My other ps/2 keyboards do work just fine.Try press P when you connect it to PS2. I heard it works that way.When you want to use usb port then press U when connect it. If it not working instantly,then try to restart your computer cause ps2 port usually needs restart to work.
Its not a biggy if the ps/2 interface is just for aesthetics. Tho if there is a away to make Dr.D to work through ps/2 i would love to know how to make this happen.
My Dr.D works with USB adapter just fine but i would love to use it through ps/2 interface.
Post by: harjoat on Tue, 06 July 2021, 21:03:05
Couldn't find reference to it anywhere but the PCB is reprogrammable using Bootmapper by Winkeyless (also seems to have the same physical dimensions as a B87 from WKL).
Downloadable here: https://blog.winkeyless.kr/183
Hope this helps someone in the future!