[GB] Noxary X60 V1

[Butter]

Paid

[alveeno]

I'd be interested in an acrylic diffuser layer. Is there anyway to obtain one for this case?

[xondat]

Just hit 50 original editions so I've closed the form. Going to see how many don't pay the deposit and go from there.

[Malenky]

Paid!

[xvetter]

sent a message

[Proyoyo]

Paid! I might PM you later to change the color selection.

[CommonCurt]

Paid 

[xondat]

Extra plates are now available. See notes in the OP for more information.

[joey]

Anyone else interested in some ANSI only plates? (I really dislike the ISO cluster on universal plates). Hoping I can get some interest and get a few made as well. (if xondat is up for that)

[Malenky]

PM Xondat and a few minutes later my extra plate is already on the spreadsheet. Fantastic job on this whole thing so far.

[CommonCurt]

Extra plates are now available. See notes in the OP for more information.

I was actually considering asking if we could get extra plates  )

Anyone else interested in some ANSI only plates? (I really dislike the ISO cluster on universal plates). Hoping I can get some interest and get a few made as well. (if xondat is up for that)

If ANSI only plates were a option I'd definitely be interested.

[joey]

If ANSI only plates were a option I'd definitely be interested.

They'd be more expensive than the extras xondat is offering (since we'd have less). Would you still be interested if they were 30-40$? xondat said we'd need to get around 10+ to make it worthwhile.

[CommonCurt]

If ANSI only plates were a option I'd definitely be interested.

They'd be more expensive than the extras xondat is offering (since we'd have less). Would you still be interested if they were 30-40$? xondat said we'd need to get around 10+ to make it worthwhile.

Yeah. I'd  get one.

[Khers]

I'd also be interested in an ANSI only plate

[jorgenslee]

Also  interested on ANSI only plate. It would be better if we narrow down the option to stainless steel.

[logomachy]

Paid. Really cool to see how quickly this project has been actualized. Keep it up.
...

I too would join for an ANSI only plate.

[Malenky]

I won't be using ISO enter, so I'd be OK with the original editions being ANSI.

I WOULD still need to be universal for other layouts though, obviously with HHKB style, many people will be using HHKB style split backspace and split right shift for function. So I'm not sure what exactly every means by ANSI plate, specifically.

[joey]

I won't be using ISO enter, so I'd be OK with the original editions being ANSI.

I WOULD still need to be universal for other layouts though, obviously with HHKB style, many people will be using HHKB style split backspace and split right shift for function. So I'm not sure what exactly every means by ANSI plate, specifically.

My idea is to have a universal plate, but ANSI only universal. That ISO enter/ANSI enter cut out is horrendous.

Please PM me with the details of what ANSI only plate you'd want. Then I can talk to xondat once I've got a better idea of numbers!

[Malenky]

I won't be using ISO enter, so I'd be OK with the original editions being ANSI.

I WOULD still need to be universal for other layouts though, obviously with HHKB style, many people will be using HHKB style split backspace and split right shift for function. So I'm not sure what exactly every means by ANSI plate, specifically.

My idea is to have a universal plate, but ANSI only universal. That ISO enter/ANSI enter cut out is horrendous.

Please PM me with the details of what ANSI only plate you'd want. Then I can talk to xondat once I've got a better idea of numbers!

What would you do about the left shift? Iso left shift is used by some people to get a Fn key on your little finger.

[joey]

I won't be using ISO enter, so I'd be OK with the original editions being ANSI.

I WOULD still need to be universal for other layouts though, obviously with HHKB style, many people will be using HHKB style split backspace and split right shift for function. So I'm not sure what exactly every means by ANSI plate, specifically.

My idea is to have a universal plate, but ANSI only universal. That ISO enter/ANSI enter cut out is horrendous.

Please PM me with the details of what ANSI only plate you'd want. Then I can talk to xondat once I've got a better idea of numbers!

What would you do about the left shift? Iso left shift is used by some people to get a Fn key on your little finger.

That's why I want people to PM me what they want so I can get a feel for what people want. But split left shift doesn't make things uncomfortably ugly, so could be added.

[Malenky]

And are you planning to propose additional plates me made, or just modify the existing ones? I'm already in for one of the spare plates, so 3 plates would be really excessive, but if it's an option to change the existing plates, I'd be interested. I'd PM you but for the sake of clarity for other people, I think having the discussion in the thread is more wise.

[joey]

I'm just trying not to abuse this thread too much.
You would still need to buy the one universal plate from xondat. If this went through, you could buy additional ANSIversal plates.

[WCO1]

deposit paid.

[aaron6301]

It was mentioned on page 3 that switch moddable plates were a definite but as the thread progressed, it seems as though that option was removed from the description. Is that still on the table or was that removed to minimize overall production costs?

Also, PM inbound about an additional plate/pcb.

[brighenne]

I would love an ansi universal carbon plate, but I suspect that would be difficult.

[xondat]

It was mentioned on page 3 that switch moddable plates were a definite but as the thread progressed, it seems as though that option was removed from the description. Is that still on the table or was that removed to minimize overall production costs?

All plates will allow switch modding.

[kenlee]

Quick question the bottom case will have notch to put non-slip pad?

[infiniti]

Moved to GB sub-forum. GLWGB!

[xondat]

Moved to GB sub-forum. GLWGB!

Thanks!

Quick question the bottom case will have notch to put non-slip pad?

I most likely will have the notches added yes.

[TieuNgu]

what are the numbers in the second column of the spreadsheet?

[romevi]

what are the numbers in the second column of the spreadsheet?

More

125
25
22
1348
118
982
123
10
19
364
218
14
52
83
1228
1383
52
14
1759
13
729
255
74
12
69
56
729
146
1759
1348
4085
16
43

159
146
207

816
42
1058
196
164
432
1
3388
376
1565
32
167
99
2456
winkeyless
27
13
163
163
67
1205
183

[JulienC]

what are the numbers in the second column of the spreadsheet?

It looks like post count on GH.

[Vaun]

Oh my god. I have been waiting for this for years. Had this been a week ago all priorities would have gone out thew window and I would´ve gotten two.

[duhhey]

Paid

[xondat]

There are a few spots available for original editions so I've opened the form up. I'm going to give it 48 hours and then randomly select who the spots go to.

Form

[WNovizar]

There are a few spots available for original editions so I've opened the form up. I'm going to give it 48 hours and then randomly select who the spots go to.

Form

Submitted. hopefully I can get the spots

[xondat]

There are a few spots available for original editions so I've opened the form up. I'm going to give it 48 hours and then randomly select who the spots go to.

Form

24 hour left.

[manofinterests]

Here's to hoping I get in for an HHKB Spot!

[brighenne]

Here's to hoping I get in for an HHKB Spot!

There are a handful of us in California already. We should start a club.

[loud_asian]

Here's to hoping I get in for an HHKB Spot!

There are a handful of us in California already. We should start a club.

count me in

[brighenne]

Here's to hoping I get in for an HHKB Spot!

There are a handful of us in California already. We should start a club.

count me in

Oh snap, LBC Carbon Edition Club. Maybe we should combine shipping for some tiny savings

[loud_asian]

Here's to hoping I get in for an HHKB Spot!

There are a handful of us in California already. We should start a club.

count me in

Oh snap, LBC Carbon Edition Club. Maybe we should combine shipping for some tiny savings

I got a buddy that actually got into this groupbuy as well, it'd be pretty neat to save save a couple of bucks

[CommonCurt]

So have we found out if there will be a ANSI only plate option for the extra plates?

I would like to know before I pick out what color I want for my extra plate .

[slickmamba]

Depending on how busy I am, I may be able to proxy if shipping ends up being crazy expensive. 

[SevenU]

Depending on how busy I am, I may be able to proxy if shipping ends up being crazy expensive.

This would be nice for people in US if it could cut shipping price by a bit.

Sent from my SCH-I545 using Tapatalk

[cmd]

Depending on how busy I am, I may be able to proxy if shipping ends up being crazy expensive.

I second this. I feel as if it would greatly cut down on shipping costs.

[WNovizar]

Just checked order lists, and my name is not there, despite already filled form 3 days ago :d

[loud_asian]

Just checked order lists, and my name is not there, despite already filled form 3 days ago :d

I think order forms were randomly selected

[WNovizar]

Just checked order lists, and my name is not there, despite already filled form 3 days ago :d

I think order forms were randomly selected

Random, really? I am sad panda :d

[brighenne]

Just checked order lists, and my name is not there, despite already filled form 3 days ago :d

I think order forms were randomly selected

Random, really? I am sad panda :d

You even quoted xondat's post where he said it would be random.