Author Topic: [GB] Noxary X60 V1 (Read 458209 times)

xondat · « **Reply #750 on:** Thu, 06 October 2016, 11:04:30 »

Quote from: PollandAkuma on Thu, 06 October 2016, 10:54:24

xondat, after you assemble it could you do a typing video? Thanks!

Sure - it will be 67g Zealios in the aluminium plate and Gateron Blacks in the stainless steel plate.

Quote from: aaron6301 on Thu, 06 October 2016, 10:41:34

Looking great, Xondat. November can't come fast enough! As my first child is expected in the same month, this is going to be an amazing November

Congratulations! On the baby, of course.

loud_asian · « **Reply #751 on:** Thu, 06 October 2016, 11:35:44 »

Hey xondat, could take a picture comparing the sizes of the bottom bezels of the X60 and HHKB?

RocketGruntJake · « **Reply #752 on:** Thu, 06 October 2016, 11:54:42 »

Best show and tell ever

xondat · « **Reply #753 on:** Thu, 06 October 2016, 11:55:20 »

Quote from: loud_asian on Thu, 06 October 2016, 11:35:44

Hey xondat, could take a picture comparing the sizes of the bottom bezels of the X60 and HHKB?

I'm making pasta now but yeah I can later.

Malenky · « **Reply #754 on:** Thu, 06 October 2016, 12:32:37 »

Paid! Nice TA pics

Fictiouz · « **Reply #755 on:** Thu, 06 October 2016, 12:51:15 »

Quote from: PollandAkuma on Thu, 06 October 2016, 10:54:24

Fictiouz, looking at your signature, you're gonna be so broke

xondat, after you assemble it could you do a typing video? Thanks!

As soon as I get the X60 built I'm selling my B.face and I currently have another B.face I'm selling to keep the funds at an ok level.

JulienC · « **Reply #756 on:** Thu, 06 October 2016, 12:59:42 »

Paid !

pexon · « **Reply #757 on:** Thu, 06 October 2016, 13:25:32 »

Posting cus I bought but didn't respond so I can see it in new replies

xondat · « **Reply #758 on:** Thu, 06 October 2016, 18:00:47 »

Quote from: loud_asian on Thu, 06 October 2016, 11:35:44

Hey xondat, could take a picture comparing the sizes of the bottom bezels of the X60 and HHKB?

Fictiouz · « **Reply #759 on:** Thu, 06 October 2016, 23:38:16 »

All paid. My body is now ready.

fendent · « **Reply #760 on:** Fri, 07 October 2016, 07:17:17 »

November is going to be a good month.

xondat · « **Reply #761 on:** Fri, 07 October 2016, 08:21:22 »

Most likely going to be extras up for grabs tonight, there are 9 unpaid invoices with 3 people that haven't contacted me so I imagine they're dropping out. Going to make it FCFS as this benefits the people that have been following the thread. I'll be cancelling all unpaid invoices from people that haven't contacted me at 23:59:59 UTC tonight.

Oh, bunnylake posted the things I need to build it today so they will be here tomorrow.

wodan · « **Reply #762 on:** Fri, 07 October 2016, 09:30:40 »

Meow.

What do we need to do? Throw money at you till it sticks?

Jumie · « **Reply #763 on:** Fri, 07 October 2016, 09:53:02 »

any WKL to grab?

finalarcadia · « **Reply #764 on:** Fri, 07 October 2016, 10:12:29 »

Sign me up for an extra!

aaron6301 · « **Reply #765 on:** Fri, 07 October 2016, 10:15:03 »

Quote from: wodan on Fri, 07 October 2016, 09:30:40

Meow.

What do we need to do? Throw money at you till it sticks?

GL Wodan! Cheering for you since you brought us the HAD kits

SJHL · « **Reply #766 on:** Fri, 07 October 2016, 10:29:08 »

WKL looks great. I regret not joining.

duhhey · « **Reply #767 on:** Fri, 07 October 2016, 12:17:28 »

Paid!

xondat · « **Reply #768 on:** Fri, 07 October 2016, 17:59:45 »

Payment is due in 1 hour from now. I will be cancelling invoices on people that haven't contacted me and making some slots free, I will post a FCFS form here.

pace8500 · « **Reply #769 on:** Fri, 07 October 2016, 18:00:59 »

Quote from: xondat on Fri, 07 October 2016, 17:59:45

Payment is due in 1 hour from now. I will be cancelling invoices on people that haven't contacted me and making some slots free, I will post a FCFS form here.

Definitely interested in one if there are any available.

xondat · « **Reply #770 on:** Fri, 07 October 2016, 19:11:16 »

There will be 2 Standard spots available. Places will be given on FCFS, and you must be able to pay the invoice within 24 hours.

Form here.

wodan · « **Reply #771 on:** Fri, 07 October 2016, 19:13:12 »

Invoice me already!

Jumie · « **Reply #772 on:** Fri, 07 October 2016, 19:14:52 »

me too

xondat · « **Reply #773 on:** Sat, 08 October 2016, 08:36:20 »

Fell asleep last night... I'll sort invoices out later today. I'll ask be building the boards today as I believe the PCBs arrived!

jeffbolton · « **Reply #774 on:** Sat, 08 October 2016, 13:53:32 »

man looks like i missed out. I just saw this on Slack this morning, hopefully I can get an extra spot.

pr0ximity · « **Reply #775 on:** Sat, 08 October 2016, 15:48:23 »

God that thing is so pretty. The envy is real.

Tobi45 · « **Reply #776 on:** Sat, 08 October 2016, 17:12:03 »

This board is looking so good. I'd get one in a heartbeat, if I had the money right now. I guess I could sell some stuff to get the required money, but once it's gone, the GB will probably be over anyway

Anyway, best of luck filling these spots, your work looks great!

xondat · « **Reply #777 on:** Sat, 08 October 2016, 19:33:57 »

Invoices are out to 2 people! 24 hours to pay, no extensions, and it will be cancelled if it goes unpaid.

oatmicro · « **Reply #778 on:** Sat, 08 October 2016, 20:13:56 »

Congrats to the people who got invoices,

I'm not fast enough

, just hoping for round 2 not even know it will happen or not.

jeffbolton · « **Reply #779 on:** Sat, 08 October 2016, 20:20:54 »

Quote from: oatmicro on Sat, 08 October 2016, 20:13:56

Congrats to the people who got invoices,

I'm not fast enough , just hoping for round 2 not even know it will happen or not.

https://geekhack.org/index.php?topic=85106.0

oatmicro · « **Reply #780 on:** Sat, 08 October 2016, 21:06:18 »

Quote from: jeffbolton on Sat, 08 October 2016, 20:20:54

Quote from: oatmicro on Sat, 08 October 2016, 20:13:56
Congrats to the people who got invoices,

I'm not fast enough , just hoping for round 2 not even know it will happen or not.

https://geekhack.org/index.php?topic=85106.0

Thank you for the info

originally, I love that they have HHKB style in the option and case design is perfect to me.

it really look like TGR keyboard in 60% size with the HHKB style and dark grey color as well.

one of my most wanted keyboard but I have to move on from this.

seem like I have to get 75% size instead(if it actually happen) but that is fine, I love that design no matter size it is.

good bye HHKB

wodan · « **Reply #781 on:** Sun, 09 October 2016, 01:20:47 »

Quote from: aaron6301 on Fri, 07 October 2016, 10:15:03

GL Wodan! Cheering for you since you brought us the HAD kits

Thanks so much for the support! Had to sell my kidney way below market value in a rush but ... paid.

wodan · « **Reply #782 on:** Sun, 09 October 2016, 01:31:29 »

Quote from: oatmicro on Sat, 08 October 2016, 21:06:18

good bye HHKB

If you are looking for the HHKB layout, stay tuned for the next round of Viper/Ealge from Duck. Have a look at the last GB thread, this might be a great alternative for you. I was super desperate for the X60 for it's WKL layout support. Not too common in chunky aluminium 60% ...

oatmicro · « **Reply #783 on:** Sun, 09 October 2016, 01:49:35 »

Quote from: wodan on Sun, 09 October 2016, 01:31:29

Quote from: oatmicro on Sat, 08 October 2016, 21:06:18

good bye HHKB

If you are looking for the HHKB layout, stay tuned for the next round of Viper/Ealge from Duck. Have a look at the last GB thread, this might be a great alternative for you. I was super desperate for the X60 for it's WKL layout support. Not too common in chunky aluminium 60% ...

Thank you buddy, I will not miss again

Moistgun · « **Reply #784 on:** Sun, 09 October 2016, 06:59:01 »

Quote from: oatmicro on Sat, 08 October 2016, 20:13:56

Congrats to the people who got invoices,

I'm not fast enough , just hoping for round 2 not even know it will happen or not.

Xondat said before that there won't be a round 2 but a v2
And I mean v2 x60

xondat · « **Reply #785 on:** Sun, 09 October 2016, 07:00:32 »

Quote from: Moistgun on Sun, 09 October 2016, 06:59:01

Xondat said before that there won't be a round 2 but a v2

Was literally about to say this.

There are a few things I am already working on implementing into V2, there isn't a timeline but it 99% will happen...

)

Moistgun · « **Reply #786 on:** Sun, 09 October 2016, 07:02:35 »

Quote from: xondat on Sun, 09 October 2016, 07:00:32

Quote from: Moistgun on Sun, 09 October 2016, 06:59:01
Xondat said before that there won't be a round 2 but a v2
Was literally about to say this.

There are a few things I am already working on implementing into V2, there isn't a timeline but it 99% will happen... )

Maybe I will wait for this instead of x75 :thinking:
So many choices

oatmicro · « **Reply #787 on:** Sun, 09 October 2016, 07:47:16 »

Quote from: Moistgun on Sun, 09 October 2016, 07:02:35

Quote from: xondat on Sun, 09 October 2016, 07:00:32
Quote from: Moistgun on Sun, 09 October 2016, 06:59:01
Xondat said before that there won't be a round 2 but a v2
Was literally about to say this.

There are a few things I am already working on implementing into V2, there isn't a timeline but it 99% will happen... )
Maybe I will wait for this instead of x75 :thinking:
So many choices

They probably launch in the different timeline.

R4WBIT · « **Reply #788 on:** Sun, 09 October 2016, 13:48:11 »

Sunday now and still no build pics

xondat · « **Reply #789 on:** Sun, 09 October 2016, 15:39:22 »

I've been going out a lot more than usual, however I have built it.

Two issues:

The button on the bottom of the PCB is pressed when the top half is fully screwed in, but taking the housing of the button means it isn't pressed. This will have to be fixed by an indent in the weight.
The USB hole is barely functional at the minute, I had to take the shrink off my cable by pexon for it to fit, and use a bit of force to get it plugged in. The hole will be made slightly bigger in order to accommodate for as many cables as realistic.

Otherwise, it's super good. I have no other concerns do to with the case, and it feels amazing and super solid. Currently using the winkeyless top with linears in the stainless steel weight, and everything feels great and super good. I'll take some pictures and a typing video tomorrow when I have more light.

Malenky · « **Reply #790 on:** Sun, 09 October 2016, 23:41:26 »

Will there be enough clearance for other PCBs? I plan on using the Zeal60!

loud_asian · « **Reply #791 on:** Mon, 10 October 2016, 01:07:06 »

Quote from: Malenky on Sun, 09 October 2016, 23:41:26

Will there be enough clearance for other PCBs? I plan on using the Zeal60!

Looks like the button on the zeal60 is about 2cm away from the the "standard"

CommonCurt · « **Reply #792 on:** Mon, 10 October 2016, 01:11:06 »

Quote from: Malenky on Sun, 09 October 2016, 23:41:26

Will there be enough clearance for other PCBs? I plan on using the Zeal60!

I'm wondering about the NerD60 pcb?

loud_asian · « **Reply #793 on:** Mon, 10 October 2016, 01:24:02 »

Quote from: CommonCurt on Mon, 10 October 2016, 01:11:06

Quote from: Malenky on Sun, 09 October 2016, 23:41:26
Will there be enough clearance for other PCBs? I plan on using the Zeal60!

I'm wondering about the NerD60 pcb?

Should be okay. IIRC the NerD60 doesn't have a button to reprogram but makes you hold down a key instead. You might run into troubles if you plan on using bluetooth though

CommonCurt · « **Reply #794 on:** Mon, 10 October 2016, 01:37:17 »

Quote from: loud_asian on Mon, 10 October 2016, 01:24:02

Quote from: CommonCurt on Mon, 10 October 2016, 01:11:06
Quote from: Malenky on Sun, 09 October 2016, 23:41:26
Will there be enough clearance for other PCBs? I plan on using the Zeal60!

I'm wondering about the NerD60 pcb?

Should be okay. IIRC the NerD60 doesn't have a button to reprogram but makes you hold down a key instead. You might run into troubles if you plan on using bluetooth though

Okay, thanks

xondat · « **Reply #795 on:** Mon, 10 October 2016, 06:13:40 »

ZEAL WHY

I'm about to take pictures of the finished build, but just dropping in to say that the cut off for color/case changes is 48 hours from this post. No further changes can be made afterwards.

jorgenslee · « **Reply #796 on:** Mon, 10 October 2016, 06:23:25 »

Quote from: xondat on Mon, 10 October 2016, 06:13:40

ZEAL WHY

I'm about to take pictures of the finished build, but just dropping in to say that the cut off for color/case changes is 48 hours from this post. No further changes can be made afterwards.

Did you receive the confirmation if what case color should be hard anodized? I remember it was mentioned earlier to be dark gray.

xondat · « **Reply #797 on:** Mon, 10 October 2016, 11:49:00 »

aaron6301 · « **Reply #798 on:** Mon, 10 October 2016, 11:52:05 »

Quote from: xondat on Mon, 10 October 2016, 11:49:00

Show Image

Show Image

Show Image

Show Image

Show Image

Hnggg, that looks and sounds great!

loud_asian · « **Reply #799 on:** Mon, 10 October 2016, 11:52:19 »

Quote from: xondat on Mon, 10 October 2016, 11:49:00

Show Image

Show Image

Show Image

Show Image

Show Image

Beautiful

News:

Author Topic: [GB] Noxary X60 V1 (Read 458209 times)