NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
I'm finally done sourcing components for this. I'm ready, xondat!Show Image
Quote from: Khers on Mon, 06 February 2017, 05:26:32I'm finally done sourcing components for this. I'm ready, xondat!Show ImageI've had my lubed 62g gateron blacks with zealio clear bottom, zeal60, and zeal transparent stabs ready for a while now too. Can someone explain what the AVR USBasp thing is?
Order #32 is up for sale. I'd highly recommend jumping on this as it's in the best configuration. HHKB in Dark Gray with an ANSI Red plate. Price is $350 + fees. Please PM with subject line "Order #32", please also include your PayPal email address so that I can invoice you. P.S. I should've noted this will turn into a standard, and not stay a Founders Edition.
selling 2 of my spots #38 Dark Grey HHKB, red plate#68 Silver HHKB, red ansi plate, 1 pcbFCFS, PM me your PayPal address and I'll forward it to xondat
Quote from: loud_asian on Tue, 07 February 2017, 15:14:28selling 2 of my spots #38 Dark Grey HHKB, red plate#68 Silver HHKB, red ansi plate, 1 pcbFCFS, PM me your PayPal address and I'll forward it to xondatPm'd about #38, but as i see in list, there is - asianboy2000
Quote from: Damonskv on Tue, 07 February 2017, 15:36:24Quote from: loud_asian on Tue, 07 February 2017, 15:14:28selling 2 of my spots #38 Dark Grey HHKB, red plate#68 Silver HHKB, red ansi plate, 1 pcbFCFS, PM me your PayPal address and I'll forward it to xondatPm'd about #38, but as i see in list, there is - asianboy2000List hasn't been updated, I bought that spot
I'll give it a few days, but if I do decide to have more plates made, I will open orders for additional plates up for a few days.
hey xondat I pm'd you about the whole refund reinvoice thing a week or two ago. ty!
Quote from: slickmamba on Fri, 10 February 2017, 23:07:43hey xondat I pm'd you about the whole refund reinvoice thing a week or two ago. ty!Can you pm me again please? Must've accidentally cleared it when sorting my messages.
I'll be sorting the reinvoicing in an hour or two.I'd also like people to contact me if they still have a deposit that hasn't been refunded yet and they didn't get into the group buy.
Quote from: xondat on Mon, 13 February 2017, 12:18:03I'll be sorting the reinvoicing in an hour or two.I'd also like people to contact me if they still have a deposit that hasn't been refunded yet and they didn't get into the group buy.I don't want to be re-invoiced so you can skip me if you were planning on doing everyone. Thanks
Quote from: pace8500 on Mon, 13 February 2017, 12:54:05Quote from: xondat on Mon, 13 February 2017, 12:18:03I'll be sorting the reinvoicing in an hour or two.I'd also like people to contact me if they still have a deposit that hasn't been refunded yet and they didn't get into the group buy.I don't want to be re-invoiced so you can skip me if you were planning on doing everyone. ThanksIt's only people that request it
Already paid the other invoices, can you let me know when you refund the original one? On a side note, got any neat pictures from that meetup?
Might extra plates (particularly those stainless steel ones) still be a thing?
Quote from: poolside on Mon, 13 February 2017, 17:16:38Might extra plates (particularly those stainless steel ones) still be a thing?Doubt it. Maybe with X75 production and with a MOQ of 25 or something like that but I'm not sure if that'd hit.
That's a bummer! Any chance you'd be willing to release the plate CAD files so we may get Stainless Steel plates made if we ever want them? I would've loved a Carbon plate too, but understand those were only for the founders, sadly. I heard Carbon fiber sounds and feels nice to type on.
Quote from: Unforgivable on Mon, 13 February 2017, 18:30:19That's a bummer! Any chance you'd be willing to release the plate CAD files so we may get Stainless Steel plates made if we ever want them? I would've loved a Carbon plate too, but understand those were only for the founders, sadly. I heard Carbon fiber sounds and feels nice to type on. Probably won't - I'll gauge interest for extra plates in a week or two and see where it goes. Only for Carbon Editions, not Founders. Future X models won't have the CE as I think it's really nice to type on - nicer than aluminum or stainless steel.
Quote from: xondat on Mon, 13 February 2017, 18:52:42Quote from: Unforgivable on Mon, 13 February 2017, 18:30:19That's a bummer! Any chance you'd be willing to release the plate CAD files so we may get Stainless Steel plates made if we ever want them? I would've loved a Carbon plate too, but understand those were only for the founders, sadly. I heard Carbon fiber sounds and feels nice to type on. Probably won't - I'll gauge interest for extra plates in a week or two and see where it goes. Only for Carbon Editions, not Founders. Future X models won't have the CE as I think it's really nice to type on - nicer than aluminum or stainless steel.Sorry, not following Xondat... you think carbon fiber plates are the nicest feel for typing but won't be offering them on X75, etc downstream...?
Quote from: smittysteve on Mon, 13 February 2017, 19:06:35Quote from: xondat on Mon, 13 February 2017, 18:52:42Quote from: Unforgivable on Mon, 13 February 2017, 18:30:19That's a bummer! Any chance you'd be willing to release the plate CAD files so we may get Stainless Steel plates made if we ever want them? I would've loved a Carbon plate too, but understand those were only for the founders, sadly. I heard Carbon fiber sounds and feels nice to type on. Probably won't - I'll gauge interest for extra plates in a week or two and see where it goes. Only for Carbon Editions, not Founders. Future X models won't have the CE as I think it's really nice to type on - nicer than aluminum or stainless steel.Sorry, not following Xondat... you think carbon fiber plates are the nicest feel for typing but won't be offering them on X75, etc downstream...?I won't offer Carbon Editions as I want more than 10 people to have Carbon Fiber.
I have to say it at some point - there was a miscommunication between me and the factory. We're looking at this timeline now as of today: 20 days for the prototype weightusually 4 days for delivery30 days for the production weightsusually 4 days for all parts deliveryshipping invoices, sorting and shippingUnless there is a major problem with the engraving then this should be something to stick to as it's the word from the factory, but knowing how group buys in general and their luck, I'd be surprised if this happens. It's a big disappointment announcing more delays, but hopefully you can believe I'm trying to get this done ASAP.
Quote from: xondat on Tue, 14 February 2017, 18:41:41I have to say it at some point - there was a miscommunication between me and the factory. We're looking at this timeline now as of today: 20 days for the prototype weightusually 4 days for delivery30 days for the production weightsusually 4 days for all parts deliveryshipping invoices, sorting and shippingUnless there is a major problem with the engraving then this should be something to stick to as it's the word from the factory, but knowing how group buys in general and their luck, I'd be surprised if this happens. It's a big disappointment announcing more delays, but hopefully you can believe I'm trying to get this done ASAP.Thanks for the update, Xondat.From what I gather, we're currently IN the 20 days allocated for prototype weight production rather than starting the 20 day period, correct?
Okay so we're talking about a delay of more than two months and a delivery in early May ?Just trying to manage my expectations here...
No hiccups is 13th of April.
Quote from: xondat on Wed, 15 February 2017, 15:09:17No hiccups is 13th of April.Does this mean T60 is pushed back as well?
Quote from: exanile_tabasco on Wed, 15 February 2017, 20:41:53Quote from: xondat on Wed, 15 February 2017, 15:09:17No hiccups is 13th of April.Does this mean T60 is pushed back as well?Everything is as the prototypes for T60, X65, and X75 are being delivered with the production weights and cases
What is a T60? Don't think I remember hearing about that one.
What layout are the orders 68 and 69?
Quote from: Kellybear on Sun, 19 February 2017, 09:47:15What layout are the orders 68 and 69?You can check them here: https://docs.google.com/spreadsheets/d/1ZQQ6ngMRqjPdd95xnJi76wJYL8wnBK_aOvUXHPMvHcY/edit#gid=0
Anyone interested in buying #68 or #69, please fill this form in.Quote from: CommonCurt on Sun, 19 February 2017, 00:46:11What is a T60? Don't think I remember hearing about that one.Tray mount 60% case.
Quote from: xondat on Sun, 19 February 2017, 03:49:02Anyone interested in buying #68 or #69, please fill this form in.Quote from: CommonCurt on Sun, 19 February 2017, 00:46:11What is a T60? Don't think I remember hearing about that one.Tray mount 60% case.Oh cool. Is there a thread with any renders yet?
