Author Topic: [IC] Eri F12 TKL (Read 34070 times)

halocantkb · « **on:** Wed, 06 October 2021, 19:03:42 »

It’s a basic tkl with a big weight and a bottom gasket design.

geekhack sucks at showing youtube videos so click the link to hear the soundtest if it's broken

Geekark Dolch - set by Kumori, render by eg0t1st1k4l

GMK 1520 - set & render by hark

Technical Specs:
18.5mm front height from front bezel, 19.65mm from the inside edge of the bezel
7deg angle
~3kg (6.6 pounds) unbuilt, 3.6kg (7 pounds) built w/ a brass weight
SKUF
Ai03 UDB
Seperate ISO/ANSI Plates
PCB by Lfgberg (QMK/VIA compat)
Screwless, Seamless
Forced WKL

Vendors:
Keyspresso, rest tbd

Special thanks to:
Hugo - vendor
Lfgberg - pcb design
eg0t1st1k4l - renders
hark - renders
Siege - general advice and checking manufacturability
mangeHD - internal help

finally, shoutout to zdc for all their support <3

eg0t1st1k4l · « **Reply #1 on:** Wed, 06 October 2021, 19:04:13 »

reserved

halocantkb · « **Reply #2 on:** Wed, 06 October 2021, 19:05:18 »

FAQ
Mounting Style
Eri uses a bottom gasket mounting style, with the screw going straight through the gasket. The intent of the bottom gasket is to not mute the sound as much as a full isolation mount gasket, as the vibrations are not dampened on both the top and bottom of the plate.

Units?
This IC helps determine the amount of units that will be included in the gb. As such, there's no gb unit amount currently decided.

Pricing
I can't give an estimate on pricing as I don't want to set up any false expectations but I'll try to keep it at a reasonable level, especially for the brass weight.

Simulation

hark · « **Reply #3 on:** Wed, 06 October 2021, 19:06:11 »

Wow that black set looks really good

Sandy · « **Reply #4 on:** Wed, 06 October 2021, 19:06:29 »

looks good 🅱ro! glwic

soloplayer · « **Reply #5 on:** Wed, 06 October 2021, 19:09:47 »

look so good!! i'm very interested

kumori · « **Reply #6 on:** Wed, 06 October 2021, 19:17:24 »

eri so nice
glwic friend

Hugs94 · « **Reply #7 on:** Wed, 06 October 2021, 19:18:10 »

Wow very pog.

Kinesiologist · « **Reply #8 on:** Wed, 06 October 2021, 19:21:18 »

I like TKLs

Baka Bot · « **Reply #9 on:** Wed, 06 October 2021, 19:22:11 »

looks promising. any target price available?

hali · « **Reply #10 on:** Wed, 06 October 2021, 19:23:37 »

great rectangle

scrps · « **Reply #11 on:** Wed, 06 October 2021, 19:25:43 »

nice hands bro

Alejo1707 · « **Reply #12 on:** Wed, 06 October 2021, 19:37:01 »

autobot · « **Reply #13 on:** Wed, 06 October 2021, 19:40:47 »

Very nice, I’m watching this!

SDKCAMPING · « **Reply #14 on:** Wed, 06 October 2021, 19:42:45 »

GLWIC, all board the janecult no.2 train

frostykoala · « **Reply #15 on:** Wed, 06 October 2021, 19:52:10 »

naisu

Lfgberg · « **Reply #16 on:** Wed, 06 October 2021, 21:04:23 »

hypehypehypehype glad to see this coming to fruition

chat and team · « **Reply #17 on:** Wed, 06 October 2021, 23:53:01 »

estamos

darthcapn · « **Reply #18 on:** Thu, 07 October 2021, 00:07:02 »

Glwic! Looks rad!

Sent from my SM-G988U using Tapatalk

vi0till · « **Reply #19 on:** Thu, 07 October 2021, 05:58:18 »

How limited this will be? I am interested.

halocantkb · « **Reply #20 on:** Thu, 07 October 2021, 06:40:39 »

Quote from: Kinesiologist on Wed, 06 October 2021, 19:21:18

I like TKLs

me too

Quote from: Baka Bot on Wed, 06 October 2021, 19:22:11

looks promising. any target price available?

not atm but hoping to keep it at a reasonable level, especially with the brass weight

Quote from: vi0till on Thu, 07 October 2021, 05:58:18

How limited this will be? I am interested.

no amount decided, just gauging interest before we decide on an amount

halocantkb · « **Reply #21 on:** Thu, 07 October 2021, 11:06:56 »

quick update - faq added

sup3r170va · « **Reply #22 on:** Thu, 07 October 2021, 13:02:41 »

Very nice looking and sounding board. Looking forward.

cyyz · « **Reply #23 on:** Thu, 07 October 2021, 13:46:38 »

Looks great, interested.

Surefoot · « **Reply #24 on:** Thu, 07 October 2021, 15:12:54 »

Mounting system sounds really interesting for us who like firm mounts. Brass plate would be great.

actress · « **Reply #25 on:** Fri, 08 October 2021, 10:42:47 »

Looks very nice. Interested if there is an EU vendor.

baka jiken · « **Reply #26 on:** Sun, 10 October 2021, 04:29:41 »

Very nice looking board! Heafty

//gainsborough · « **Reply #27 on:** Sun, 10 October 2021, 15:57:49 »

Quote from: halocantkb on Thu, 07 October 2021, 06:40:39

no amount decided, just gauging interest before we decide on an amount

Is there a form we can fill out to show interest?

halocantkb · « **Reply #28 on:** Sun, 10 October 2021, 16:38:55 »

Quote from: //gainsborough on Sun, 10 October 2021, 15:57:49

Quote from: halocantkb on Thu, 07 October 2021, 06:40:39
no amount decided, just gauging interest before we decide on an amount

Is there a form we can fill out to show interest?

the big google forms button beside the discord icon

Zach · « **Reply #29 on:** Sun, 10 October 2021, 17:34:29 »

looks neat, interested

thejje · « **Reply #30 on:** Sun, 10 October 2021, 23:14:36 »

Whale_algorithm · « **Reply #31 on:** Sun, 10 October 2021, 23:21:24 »

Interested. Would you consider an offset USB port, or an F13 top row? (I know the title specifically says F12)

Onnimar · « **Reply #32 on:** Tue, 12 October 2021, 09:41:25 »

I'm game. I really like the design.

Quadrum · « **Reply #33 on:** Tue, 12 October 2021, 10:55:50 »

wish it was f13 but eri ftw

Vanquish · « **Reply #34 on:** Wed, 13 October 2021, 11:10:28 »

As the Eri is still in the interest check phase, are you considering adding WK optionality?

halocantkb · « **Reply #35 on:** Thu, 14 October 2021, 10:39:47 »

Quote from: Vanquish on Wed, 13 October 2021, 11:10:28

As the Eri is still in the interest check phase, are you considering adding WK optionality?

currently not considering wk, sorry

_rubik · « **Reply #36 on:** Thu, 14 October 2021, 11:48:24 »

This is nice. F12 > F13 IMO

mikestah · « **Reply #37 on:** Thu, 14 October 2021, 13:25:22 »

I have a burning passion for TKLs, will be watching this. GLWIC

whitewolf154 · « **Reply #38 on:** Sun, 17 October 2021, 21:35:48 »

Very interesting gasket implementation. I just hope there's some engraving on the top case so it makes the board unique

OscarPapa · « **Reply #39 on:** Wed, 20 October 2021, 04:43:52 »

This is pretty much standard wkl tkl. Nevertheless I like it a lot. Only thing I'm not sure about is the logo. I would be interested if the price is reasonable.

Neptune Keys · « **Reply #40 on:** Wed, 20 October 2021, 06:08:05 »

How different would a mount like this be against just a top mount?

Mandabanker007 · « **Reply #41 on:** Thu, 21 October 2021, 09:26:28 »

Great looking board glwic

Hiiro_XoXo · « **Reply #42 on:** Sat, 23 October 2021, 14:56:31 »

Yo this looks nice. Interested

cadrev · « **Reply #43 on:** Sun, 07 November 2021, 03:38:18 »

This looks really great! Looking forward to own one!!

hicals · « **Reply #44 on:** Mon, 15 November 2021, 18:16:59 »

Looks great, interested.

)

zozzled · « **Reply #45 on:** Tue, 16 November 2021, 15:28:46 »

The design looks really well thought out. Looking forward to this one for sure!

lunatictaco · « **Reply #46 on:** Sun, 28 November 2021, 11:23:56 »

bumped. very interested in how this turns out.

FlamedSiegmund · « **Reply #47 on:** Fri, 03 December 2021, 21:23:34 »

Keeping an eye out on this one

VXQN · « **Reply #48 on:** Mon, 06 December 2021, 09:16:39 »

Love everything about the board apart from the bottom engraving. Two capitals followed by a lower-case "i" looks a little off. Not enough to put me off purchase though!

vutid · « **Reply #49 on:** Fri, 17 December 2021, 22:18:12 »

this is too nice im creaming

News:

Author Topic: [IC] Eri F12 TKL (Read 34070 times)