[SPRiT] R1 R2 (Shipping 92% Completed)

[bianco]

I am going to ship to Sweden, UK, USA  tomorrow !

Thanks for Your Patience!!!

what about singapore?

[distel]

And germany?

[keymaster]

USA! USA! USA!

My body is ready.

[bakteria]

Are there any instructions to soldering? Since its a universal pcb it would be nice. Don't want to screw it up.

[swill]

Are there any instructions to soldering? Since its a universal pcb it would be nice. Don't want to screw it up.

Here are some soldering instructions (or as good as your going to get anyway). 

http://geekhack.org/index.php?topic=58969.msg1349714#msg1349714

[bdtbinh]

i sent an email to ur gmail acc about adding more item, pls check, thank Sprit.

[bdtbinh]

i sent an email to ur gmail acc about adding more item, pls check, thank Sprit.

[Biased opinion]

No news on Australia shipping. Come on SPRITE my mind is ready.

[sprit]

The R1  shipping Schedule   =  by 11th August. 

http://geekhack.org/index.php?topic=50580.msg1406921#msg1406921

I will do that, AT ALL  !!    

[bakteria]

Are there any led indicators? Lets say for caps lock. (60 %)
I want all white leds but multicolored for indicators (if there are any)

[sprit]

Are there any led indicators? Lets say for caps lock.
I want all white leds but multicolored for indicators (if there are any)

Are You doing Soldering LEDs for You 87% W ? 
LED  Indicators :  Caps Lock,  Scroll Lock,  Num Lock (= Pause for 87%)   

[bakteria]

Are there any led indicators? Lets say for caps lock.
I want all white leds but multicolored for indicators (if there are any)

Are You doing Soldering LEDs for You 87% W ? 
LED  Indicators :  Caps Lock,  Scroll Lock,  Num Lock (= Pause for 87%)   

Sorry just added that its a 60% board.

[sprit]

Are there any led indicators? Lets say for caps lock.
I want all white leds but multicolored for indicators (if there are any)

Are You doing Soldering LEDs for You 87% W ? 
LED  Indicators :  Caps Lock,  Scroll Lock,  Num Lock (= Pause for 87%)   

Sorry just added that its a 60% board.

60%  =  Caps Lock , ESC  need  Indicators   

[bakteria]

Are there any led indicators? Lets say for caps lock.
I want all white leds but multicolored for indicators (if there are any)

Are You doing Soldering LEDs for You 87% W ? 
LED  Indicators :  Caps Lock,  Scroll Lock,  Num Lock (= Pause for 87%)   

Sorry just added that its a 60% board.

60%  =  Caps Lock , ESC  need  Indicators   

Where exactly are the holes for the leds? Or do they go through the switch like the others?

[infiniti]

Are there any led indicators? Lets say for caps lock.
I want all white leds but multicolored for indicators (if there are any)

Are You doing Soldering LEDs for You 87% W ? 
LED  Indicators :  Caps Lock,  Scroll Lock,  Num Lock (= Pause for 87%)   

Sorry just added that its a 60% board.

60%  =  Caps Lock , ESC  need  Indicators   

Where exactly are the holes for the leds? Or do they go through the switch like the others?

The Caps Lock indicator LED is in-switch.  Mine is red in the picture below:

[bakteria]

Are there any led indicators? Lets say for caps lock.
I want all white leds but multicolored for indicators (if there are any)

Are You doing Soldering LEDs for You 87% W ? 
LED  Indicators :  Caps Lock,  Scroll Lock,  Num Lock (= Pause for 87%)   

Sorry just added that its a 60% board.

60%  =  Caps Lock , ESC  need  Indicators   

Where exactly are the holes for the leds? Or do they go through the switch like the others?

The Caps Lock indicator LED is in-switch.  Mine is red in the picture below:

Show Image

Thank you sir :)

[swill]

On my 60% I think I only have two indicator. Capslock and numlock. N/L is on the backspace switch. If there are other indicators, I have not found them yet.

[sprit]

On my 60% I think I only have two indicator. Capslock and numlock. N/L is on the backspace switch. If there are other indicators, I have not found them yet.

I just Recommend Multi Color LEDs  for Caps, and Esc  for 60%, 
I sent some pcs of MultiColor  for MR. Bakteria.
Yes!  Num Lock is at Backspace Position,  SIR!   

[dragonken]

order placed.

[dragonken]

paid! Thanks Sprit.

[sprit]

paid! Thanks Sprit.

Cheers   

[sprit]

 
 
Assembled  60% W   ::   by  Pichu23


http://geekhack.org/index.php?topic=35864.msg1414830#msg1414830       
http://www.youtube.com/watch?v=nxphnlAZk2Y     
http://imgur.com/a/b9CAu 


                   
Thanks  Pichu23 ! 


   

[sprit]

 
Assembled  60% W   ::   by  Nubbinator  



   http://geekhack.org/index.php?topic=33130.msg1415024#msg1415024

 
        
Thanks nubbinator! 

[sprit]

Model 1,2,3  Plate   ::   for  60% 

   

[sprit]

Assemble  60% W   ::   by  SPRIT


   

[sprit]

Stabilizers  are getting ready for R2    ::   incl.  Metal Wires      https://www.youtube.com/watch?v=KtqV27vtTAM 
   
                       

[infiniti]

Stabilizers  are getting ready for R2    ::   incl.  Metal Wires      https://www.youtube.com/watch?v=KtqV27vtTAM 
   
                        (Attachment Link)

OMG the background music and camera movement in that video...MUST WATCH!!!

P.S. That's a lot of stabs...

[Heliosphere]

Hi! I have a few questions:

1. Is the smokey gray-blue color an option for the acrylic? I see a sample picture on page 1, but it's not an option on the order form.
2. Does the 75% require special keycaps? It seems that it uses the large Iso enter key and other non-ANSI sized keys.
3. Do I need to use PCB mount switches? I have a set of plate-mount clear switches waiting to be used, so it would be nice if I could use plate mounting.
4. Do I choose three layer of acrylic case colors for model 3?
5. Where do I specify if I want model 1, 2, or 3?

Thank you, and I hope I'm not too late to order!

[Zeal]

Hi! I have a few questions:

1. Is the smokey gray-blue color an option for the acrylic? I see a sample picture on page 1, but it's not an option on the order form.
Yes, it's available. Mention "Charcoal Gray" in the textbox.
2. Does the 75% require special keycaps? It seems that it uses the large Iso enter key and other non-ANSI sized keys.
Nope. Sprit's 75% board supports both ANSI & ISO. That's why the plate has both the cut outs. . You'll just need to source a couple extra 1u keys to fill the right side. (Some people use numpad keys).
3. Do I need to use PCB mount switches? I have a set of plate-mount clear switches waiting to be used, so it would be nice if I could use plate mounting.
PCB and Plate mounted switches both work on Sprit's Face W PCB! Just be sure to have a plate of some sort if you use plate mounted switches! Stabs are PCB mount by default.
4. Do I choose three layer of acrylic case colors for model 3?
Model 3 is a two layered case.
5. Where do I specify if I want model 1, 2, or 3?
http://puu.sh/avzvi/e4779f5342.png

Thank you, and I hope I'm not too late to order!

Answered in bold. Feel free to ask any other questions if you're confused with anything else!

[Heliosphere]

Thank you, Zeal! Will each order include those wire stabilizers?

[Zeal]

Thank you, Zeal! Will each order include those wire stabilizers?

Stab orders ($8 USD) come with the necessary wires & plastic inserts. Each set contains 4x 2unit stabs (enter, shifts, backspace) and 1x 6.25unit spacebar stab. If you want a 7unit stab wire, it'll be $1 extra.

[Heliosphere]

Would you recommend getting extra sets? It seems like some people broke theirs in the process of assembly.

Do we also get SIP and stickers with this buy, or is that from different group buys?

[Zeal]

Would you recommend getting extra sets? It seems like some people broke theirs in the process of assembly.

Do we also get SIP and stickers with this buy, or is that from different group buys?

It's not necessary as long as you know which way the wire goes. If you'd like some extra just for re-assurance, then I don't see why not.

I'll actually be providing SIP sockets soon^TM, and stickers can be arranged with Sprit, depending on demand.

[Heliosphere]

Thanks again, Zeal. I've put in my order and noted the extra stuff just in case. Feel free to contact me if you guys need to discuss the order.

[pichu23]

Would you recommend getting extra sets? It seems like some people broke theirs in the process of assembly.

Do we also get SIP and stickers with this buy, or is that from different group buys?

umm, there's a video by bluebear that shows how to clip the stabs.
he also shows how to insert the stab wires. I've clipped my stabs and so far they're holding up pretty well.
Just be careful. 

[BlueBär]

umm, there's a video by bluebear that shows how to clip the stabs.
he also shows how to insert the stab wires. I've clipped my stabs and so far they're holding up pretty well.
Just be careful. 

[Lubed Up Slug]

Since this multiple question thing seems to work, I'll give it a go.

1. Can I just procure a plate of my own or make one that will fit on this 60% pcb? Are there any special requirements for size or thickness?  I'm guessing just 1.6mm?
2.  So if I use a plate with this I should get cherry plate mounted stabs from that Ivan group buy, not the costar ones from WASD? And those come with the springs and everything I don't need anything else?

[BlueBär]

Since this multiple question thing seems to work, I'll give it a go.

1. Can I just procure a plate of my own or make one that will fit on this 60% pcb? Are there any special requirements for size or thickness?  I'm guessing just 1.6mm?
2.  So if I use a plate with this I should get cherry plate mounted stabs from that Ivan group buy, not the costar ones from WASD? And those come with the springs and everything I don't need anything else?

1. Yes, if you have some appropriate CAD files. Thickness should be 1.6mm, correct.
2. You can get PCB mounted Cherry stabs from this GB or Plate mounted Cherry stabs from Ivans GB, but Costars stabs only if you have a plate that can use Costar stabs. Stabs don't have springs, both GBs provide all parts need afaik.

[Lubed Up Slug]

Since this multiple question thing seems to work, I'll give it a go.

1. Can I just procure a plate of my own or make one that will fit on this 60% pcb? Are there any special requirements for size or thickness?  I'm guessing just 1.6mm?
2.  So if I use a plate with this I should get cherry plate mounted stabs from that Ivan group buy, not the costar ones from WASD? And those come with the springs and everything I don't need anything else?

1. Yes, if you have some appropriate CAD files. Thickness should be 1.6mm, correct.
2. You can get PCB mounted Cherry stabs from this GB or Plate mounted Cherry stabs from Ivans GB, but Costars stabs only if you have a plate that can use Costar stabs. Stabs don't have springs, both GBs provide all parts need afaik.

1.Sweet
2.Cool and yeah idk I feel like the keyboard world makes stuff up last minute just to make this stuff more difficult, and then I end up paranoid.

[bakteria]

Just one quick question before I fire this thing up. Does it matter which direction the diodes and resistors face?
I've checked the build logs of others and followed their lead. Just want to make sure.

Here's a picture

[swill]

Just one quick question before I fire this thing up. Does it matter which direction the diodes and resistors face?
I've checked the build logs of others and followed their lead. Just want to make sure.

Here's a picture

Show Image

Resistors.  No, they can go either way.

Diodes.  YES, you must put them on in the correct orientation.  It 'looks' like you have put them on correctly, but you should be following the silk screen on the PCB to be sure...

[bakteria]

I've put the arrow towards the black line on the diodes. They are tricky though because a few face a different direction.
Like these little buggers

[HPE1000]

I've put the arrow towards the black line on the diodes. They are tricky though because a few face a different direction.
Like these little buggers

Show Image

I believe all three of those you posted are upside down, flip them if you can.  :thumb:

[bakteria]

Yeah if you look they are already flipped. Just want to make sure. Don't want to break nothing 😜

[bakteria]

Just plugged it in to my laptop and I think the computer thinks it's a mouse because when it's plugged in the mouse is not working at all.

A button and space are unresponsive. The rest seen to work. Might be faulty switches?

[wackjobz]

Could someone kindly explain the MOQ on the order form. I want to purchase the items to make a complete 60% keyboard w/ case. Is that MOQ for the group buy or individual? Thank You

[BlueBär]

Just plugged it in to my laptop and I think the computer thinks it's a mouse because when it's plugged in the mouse is not working at all.

A button and space are unresponsive. The rest seen to work. Might be faulty switches?

Resolder the unresponsive switches - faulty switches are unlikely. Not sure why your mouse doesn't work, try a reboot?

Could someone kindly explain the MOQ on the order form. I want to purchase the items to make a complete 60% keyboard w/ case. Is that MOQ for the group buy or individual? Thank You

Clearly every person who wants to join the GB needs to purchase at least 100 PCBs
Edit: Since you're new here, sorry for joking. At least 100 overall orders for the PCBs for example are needed to get to the MOQ and for you to get a PCB.

[bakteria]

Just plugged it in to my laptop and I think the computer thinks it's a mouse because when it's plugged in the mouse is not working at all.

A button and space are unresponsive. The rest seen to work. Might be faulty switches?

Resolder the unresponsive switches - faulty switches are unlikely. Not sure why your mouse doesn't work, try a reboot?

Could someone kindly explain the MOQ on the order form. I want to purchase the items to make a complete 60% keyboard w/ case. Is that MOQ for the group buy or individual? Thank You

Clearly every person who wants to join the GB needs to purchase at least 100 PCBs
Edit: Since you're new here, sorry for joking. At least 100 overall orders for the PCBs for example are needed to get to the MOQ and for you to get a PCB.

Tried resoldering both switches. no go :/
Will try and change them out and see if that helps.
Mouse works at login screen but stops working once I login.

[wackjobz]

Just plugged it in to my laptop and I think the computer thinks it's a mouse because when it's plugged in the mouse is not working at all.

A button and space are unresponsive. The rest seen to work. Might be faulty switches?

Resolder the unresponsive switches - faulty switches are unlikely. Not sure why your mouse doesn't work, try a reboot?

Could someone kindly explain the MOQ on the order form. I want to purchase the items to make a complete 60% keyboard w/ case. Is that MOQ for the group buy or individual? Thank You

Clearly every person who wants to join the GB needs to purchase at least 100 PCBs
Edit: Since you're new here, sorry for joking. At least 100 overall orders for the PCBs for example are needed to get to the MOQ and for you to get a PCB.

I don't mind the joking, no harm done. Thank you for at least responding, even with the witty humour. 

[bakteria]

Diodes were upside down..
It's been a long couple of days..