Post by: MaiTheSan on Wed, 22 April 2020, 08:15:23
What do you think about this?
Case: 5 Degree
(https://cdn.discordapp.com/attachments/696620647891337269/704698800165355922/Keycap.png)
(https://cdn.discordapp.com/attachments/696620647891337269/704698802636062740/hmmmmx2.png)
(https://cdn.discordapp.com/attachments/696620647891337269/704698810005192814/Keycap_v2.png)
(https://cdn.discordapp.com/attachments/696620647891337269/704698823011860541/loz_noyakek.png)
(https://cdn.discordapp.com/attachments/696620647891337269/704699611742208040/Rende_bot.png)
(https://cdn.discordapp.com/attachments/696620647891337269/704699640565727260/rendI_2.png)
(https://cdn.discordapp.com/attachments/696620647891337269/704699621808799744/RendI_3.png)
Layout
(https://cdn.discordapp.com/attachments/696620647891337269/702328460772769832/layout.png)
Thank you~
Maybe i'll add nametag in prototype :3 hope you enjoy it.
(https://cdn.discordapp.com/attachments/696620647891337269/704711165028335816/95106772_853488071822874_4545966426023788544_n.png)
#update
And that all the part my keyboard :3
(https://media.discordapp.net/attachments/696620647891337269/703035265077477506/unknown.png)
##Update
Added WKL layout
(https://media.discordapp.net/attachments/696620647891337269/704168232353005568/unknown.png?width=1026&height=368)
Preview~
(https://media.discordapp.net/attachments/696620647891337269/704168558124597308/unknown.png)
[Prototype soon]
[6.5 degree preview]
(https://cdn.discordapp.com/attachments/696620647891337269/706219369478357063/unknown.png)
If you like it, support me by putting this in your forum signature! ♥
(https://sanpj.tonikaku.photos/i/kqct.png) (https://geekhack.org/index.php?topic=105898.0)
Code: [Select]
[url=https://geekhack.org/index.php?topic=105898.0][img]https://sanpj.tonikaku.photos/i/kqct.png[/img][/url]
Post by: eniigma on Wed, 22 April 2020, 08:28:12
Post by: CrazyAssMonkey on Wed, 22 April 2020, 09:21:43
Post by: Ultimatum on Wed, 22 April 2020, 09:23:44
Post by: Lil on Wed, 22 April 2020, 10:13:22
I like the design quite a bit as well, but like was mentioned the bumpon cutouts are pretty close to the accents. I like the engraving and its positioning, where is it not centered? Maybe I just am not seeing it. Also how would the plate be mounted? :thumb:
Enligma means it is not vertically centred if the bottom of the board was completely facing the viewer
Post by: CrazyAssMonkey on Wed, 22 April 2020, 10:51:58
I like the design quite a bit as well, but like was mentioned the bumpon cutouts are pretty close to the accents. I like the engraving and its positioning, where is it not centered? Maybe I just am not seeing it. Also how would the plate be mounted? :thumb:
Enligma means it is not vertically centred if the bottom of the board was completely facing the viewer
Ahhhhh, I was thinking it might have been that but I do like that positioning. I was thinking he had seen some sort of sideways offset that I couldn't see.
Post by: IOVERCALLHISTIOCYTES on Wed, 22 April 2020, 11:34:28
I like the board
Post by: MaiTheSan on Thu, 23 April 2020, 04:29:56
https://media.discordapp.net/attachments/696620647891337269/702813083050967062/unknown.png
And that all the part my keyboard :3
https://media.discordapp.net/attachments/696620647891337269/702812591948300288/unknown.png
Post by: tofulo on Thu, 23 April 2020, 13:10:46
Post by: lz2019 on Thu, 23 April 2020, 21:02:42
Yes, please.
Post by: MaiTheSan on Thu, 23 April 2020, 21:16:01
Simply beautiful! I like it not feeling too simple or too bulky while not having that many decorations at the same time.
Yes, please.
Thank you~~
Post by: CrazyAssMonkey on Thu, 23 April 2020, 21:54:46
Post by: yuuS0cut3 on Thu, 23 April 2020, 22:03:12
I like the design quite a bit as well, but like was mentioned the bumpon cutouts are pretty close to the accents. I like the engraving and its positioning, where is it not centered? Maybe I just am not seeing it. Also how would the plate be mounted? :thumb:I assume this is sandwich mount.
Post by: yuuS0cut3 on Thu, 23 April 2020, 22:07:56
Post by: CrazyAssMonkey on Thu, 23 April 2020, 22:18:35
I like the design quite a bit as well, but like was mentioned the bumpon cutouts are pretty close to the accents. I like the engraving and its positioning, where is it not centered? Maybe I just am not seeing it. Also how would the plate be mounted? :thumb:I assume this is sandwich mount.
It looks that way true, I'm not really picky on mounting system. It is all about the noise and aesthetic for me. :thumb:
Edit: Tbh just aesthetic lol. I always wear headphones.
Post by: MaiTheSan on Thu, 23 April 2020, 23:44:02
Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?I will update after i have prototype :V, can you suggest some color?? :3
Post by: MaiTheSan on Thu, 23 April 2020, 23:47:38
Pm me if you need support. I can help you with posting since we are compatriot :))Of Course =)))
Post by: fabijolo on Fri, 24 April 2020, 00:22:40
Post by: Rejeckted on Fri, 24 April 2020, 00:43:30
Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?I will update after i have prototype :V, can you suggest some color?? :3
I know it's played out but that dark purple render makes me want an EVA-01 scheme
Post by: MaiTheSan on Fri, 24 April 2020, 01:57:39
(https://media.discordapp.net/attachments/696620647891337269/703137106851266560/unknown.png)Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?I will update after i have prototype :V, can you suggest some color?? :3
I know it's played out but that dark purple render makes me want an EVA-01 scheme
like this??? :V
Post by: CrazyAssMonkey on Fri, 24 April 2020, 08:04:43
Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?I will update after i have prototype :V, can you suggest some color?? :3
I know it's played out but that dark purple render makes me want an EVA-01 schemeShow Image(https://media.discordapp.net/attachments/696620647891337269/703137106851266560/unknown.png)
like this??? :V
Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.
Post by: MaiTheSan on Fri, 24 April 2020, 08:57:04
Hmmm, i'll try :v, that's amazing :3Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?I will update after i have prototype :V, can you suggest some color?? :3
I know it's played out but that dark purple render makes me want an EVA-01 schemeShow Image(https://media.discordapp.net/attachments/696620647891337269/703137106851266560/unknown.png)
like this??? :V
Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.
Post by: CrazyAssMonkey on Fri, 24 April 2020, 08:59:02
Hmmm, i'll try :v, that's amazing :3Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?I will update after i have prototype :V, can you suggest some color?? :3
I know it's played out but that dark purple render makes me want an EVA-01 schemeShow Image(https://media.discordapp.net/attachments/696620647891337269/703137106851266560/unknown.png)
like this??? :V
Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.
I'm definitely interested if you are trying those out, I don't think i have seen a color scheme like that yet, especially if you do either white with blue weights or blue with white weights, either of those two would be awesome. :thumb:
Post by: MaiTheSan on Sat, 25 April 2020, 01:03:17
Blue, Dark Blue or Cyan?? :3Hmmm, i'll try :v, that's amazing :3Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?I will update after i have prototype :V, can you suggest some color?? :3
I know it's played out but that dark purple render makes me want an EVA-01 schemeShow Image(https://media.discordapp.net/attachments/696620647891337269/703137106851266560/unknown.png)
like this??? :V
Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.
I'm definitely interested if you are trying those out, I don't think i have seen a color scheme like that yet, especially if you do either white with blue weights or blue with white weights, either of those two would be awesome. :thumb:
Post by: CrazyAssMonkey on Sat, 25 April 2020, 01:09:27
Well I was thinking something that might match GMK Classic blue or Masterpiece. But it hit me what would you think about a dark green like PBT GRÆN with brass?Blue, Dark Blue or Cyan?? :3Hmmm, i'll try :v, that's amazing :3Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?I will update after i have prototype :V, can you suggest some color?? :3
I know it's played out but that dark purple render makes me want an EVA-01 schemeShow Image(https://media.discordapp.net/attachments/696620647891337269/703137106851266560/unknown.png)
like this??? :V
Jajajajaja, that render is awesome, those two weights allow for a decent amount of interesting color play. I am starting to wonder how it would look with racing stripes. Maybe a red or blue main color with white weights or even racing green with white weights.
I'm definitely interested if you are trying those out, I don't think i have seen a color scheme like that yet, especially if you do either white with blue weights or blue with white weights, either of those two would be awesome. :thumb:
Sent from my iPhone using Tapatalk
Post by: Romutulus on Sat, 25 April 2020, 22:19:14
Post by: MaiTheSan on Sat, 25 April 2020, 22:41:36
A fan of this design. White with gold/black weights would look pretty classy just saying. That said if I personally would like to see an orange and white combination.hmmm, i think i'll try orange if i can anode this color :3
Post by: jjoejimmy on Fri, 01 May 2020, 13:47:04
Post by: CrazyAssMonkey on Fri, 01 May 2020, 14:00:00
Sent from my iPhone using Tapatalk
Post by: Romutulus on Fri, 01 May 2020, 16:45:43
Post by: RedBeardDog on Fri, 01 May 2020, 21:45:28
But 5 degrees... :-(
Post by: lys.nordique on Fri, 01 May 2020, 22:20:39
Post by: Vaudevi77ain on Fri, 01 May 2020, 23:37:09
Count me in if it's hotswap that also comes in rose gold
Post by: RedBeardDog on Sat, 02 May 2020, 01:02:54
Interested. Any estimate on a price?
Count me in if it's hotswap that also comes in rose gold
Yea. Hotswap would be nice
Post by: xEP on Sat, 02 May 2020, 02:11:52
Post by: MaiTheSan on Sat, 02 May 2020, 02:14:03
Looks awesome.but why??
But 5 degrees... :-(
Post by: MaiTheSan on Sat, 02 May 2020, 02:35:16
Interested. Any estimate on a price?hmmm
Count me in if it's hotswap that also comes in rose gold
but I don't know how to draw hotswap
Post by: RedBeardDog on Sat, 02 May 2020, 03:43:16
Too flat. But it’s just my opinion.Interested. Any estimate on a price?hmmm
Count me in if it's hotswap that also comes in rose gold
but I don't know how to draw hotswap
Post by: Vireca on Sat, 02 May 2020, 03:54:17
I like the design, maybe 6° will atract more people. Also, idk what to think about the little brass weight on the bottom, that just increase the price and I dont think it make much difference. Whats the mount system?
Post by: MaiTheSan on Sat, 02 May 2020, 14:07:23
I dont know why but I feel the name remind me other keyboardi think it top mount <(")
I like the design, maybe 6° will atract more people. Also, idk what to think about the little brass weight on the bottom, that just increase the price and I dont think it make much difference. Whats the mount system?
Post by: SoraNoTenshi on Sun, 03 May 2020, 08:40:07
One thing: I personally prefer the USB being in the middle, I don't know if you like it that way too, so you have to decide it.
But it does look very nice, looking forward to see the protos of it in the future!
Post by: MadeByMuscles on Mon, 04 May 2020, 08:06:19
Post by: MaiTheSan on Tue, 05 May 2020, 09:03:45
Interesting! Looks good to me :)It so hard because I draw my pcb from Voyager65 by AI03 :>
One thing: I personally prefer the USB being in the middle, I don't know if you like it that way too, so you have to decide it.
But it does look very nice, looking forward to see the protos of it in the future!
Post by: CrazyAssMonkey on Tue, 05 May 2020, 11:20:35
Post by: MaiTheSan on Tue, 05 May 2020, 11:59:47
Is that top right blocker in the wkl version a possible addition? I like the way it looks.Hmmm, i like WKL so i'll add it :>
(https://cdn.discordapp.com/attachments/694368970303864844/707275190958030938/unknown.png)
Post by: CrazyAssMonkey on Tue, 05 May 2020, 12:00:50
Awesome but also what about that top right blocker that removes that key?Is that top right blocker in the wkl version a possible addition? I like the way it looks.Hmmm, i like WKL so i'll add it :>Show Image(https://cdn.discordapp.com/attachments/694368970303864844/707275190958030938/unknown.png)
Sent from my iPhone using Tapatalk
Post by: MaiTheSan on Tue, 05 May 2020, 12:52:34
maybe... no? XDAwesome but also what about that top right blocker that removes that key?Is that top right blocker in the wkl version a possible addition? I like the way it looks.Hmmm, i like WKL so i'll add it :>Show Image(https://cdn.discordapp.com/attachments/694368970303864844/707275190958030938/unknown.png)
Sent from my iPhone using Tapatalk
Post by: CrazyAssMonkey on Tue, 05 May 2020, 13:00:38
maybe... no? XDAwesome but also what about that top right blocker that removes that key?Is that top right blocker in the wkl version a possible addition? I like the way it looks.Hmmm, i like WKL so i'll add it :>Show Image(https://cdn.discordapp.com/attachments/694368970303864844/707275190958030938/unknown.png)
Sent from my iPhone using Tapatalk
Jajajajaja alright.
I like the board regardless and I am definitely excited to see what the prototype looks like. :thumb:
Post by: reaLFX on Fri, 22 May 2020, 23:42:08
Post by: MaiTheSan on Wed, 27 May 2020, 03:57:32
Not bad at all! hot swap option? InterestedMaybe~~
Post by: Oddstag on Wed, 27 May 2020, 06:13:48
Post by: ufomer on Wed, 27 May 2020, 07:34:49
Sent from my SM-G950F using Tapatalk
Post by: MaiTheSan on Fri, 29 May 2020, 08:00:49
Rounded corners instead of chamfered and a gasket mount would lock this in as a must-buy for me, but those are obviously major design changes and you've got a vision I'm sure. Great looking in any case.This is my first time i design keyboard so i'm worry about gasket mount because i don't have any exp for this. Maybe in next project, i'll make gasket mount ;D :3
Thank you~~
Post by: Antvn84 on Fri, 29 May 2020, 08:42:04
Post by: maharuto on Thu, 13 August 2020, 12:24:39
looking forward to the proto update!
Post by: ligongduck on Thu, 13 August 2020, 15:23:15
Post by: darkspada on Thu, 13 August 2020, 16:12:49
Post by: idolindisguise on Thu, 13 August 2020, 17:19:31
Post by: CustomerSupport on Thu, 13 August 2020, 18:37:16
Post by: Zealzy on Thu, 13 August 2020, 19:41:13
Post by: JoltFX on Thu, 13 August 2020, 19:42:54
(https://sanpj.tonikaku.photos/i/kqct.png) (https://geekhack.org/index.php?topic=105898.0)
Post by: husnulhamidiah on Thu, 13 August 2020, 23:29:18
Post by: ever9415 on Fri, 14 August 2020, 00:31:28
If GB starts, I want to participate.
Post by: Healspam on Fri, 14 August 2020, 05:21:18
Would love to see this come to life and make it's way to my desk!
Post by: Araset on Fri, 14 August 2020, 11:19:27
Post by: EMC Labs on Mon, 17 August 2020, 06:06:44
Post by: monophonik on Tue, 18 August 2020, 22:21:31
Post by: bvd86 on Thu, 03 September 2020, 16:34:38
Post by: ever9415 on Fri, 04 September 2020, 03:45:12
I'm waiting.
Post by: 3yatt on Mon, 07 September 2020, 19:42:01
I also agree with making the weight cutout centered
Post by: One4All on Wed, 09 September 2020, 17:45:09
Post by: chowder101 on Wed, 09 September 2020, 19:01:21
Post by: CaoCao on Thu, 10 September 2020, 02:07:25
Post by: MaiTheSan on Sat, 12 September 2020, 18:46:04
how thick is the plate?1.5mm :3
Post by: MaiTheSan on Sat, 12 September 2020, 18:49:34
Could we get more information on the board? Materials for the chassis, weight and plate?aluminium 6061 or 6063, plate and weight aluminium or brass
anode, e-coating and cerakote :V
Post by: FootFingers on Sat, 12 September 2020, 18:56:45
Is there a Discord channel or anything we can use for updates? Very interested in this design
Post by: DuellM on Sat, 12 September 2020, 19:26:33
Sent from my iPhone using Tapatalk
Post by: MaiTheSan on Sat, 12 September 2020, 19:28:51
@MaiTheSansoon :3 when prototype done :V
Is there a Discord channel or anything we can use for updates? Very interested in this design
(https://sanprojects.tonikaku.photos/i/onmw.png)
Post by: MaiTheSan on Sat, 12 September 2020, 19:29:18
I really like this keyboard hopefully I can participate in the gbThanks~
Sent from my iPhone using Tapatalk
Post by: Curin Derwin on Mon, 14 September 2020, 22:31:00
Post by: MaiTheSan on Tue, 15 September 2020, 20:24:21
ALPS Support?"maybe" yes :V
Post by: SherlockBunny on Wed, 30 September 2020, 08:05:07
Not bad at all! hot swap option? Interested
YES please add a hot-swap option. I love the design btw, especially the back. Would definitely buy with hot-swap PCB.
Post by: El_Jackador on Wed, 30 September 2020, 08:22:40
Post by: grabmienutz on Wed, 30 September 2020, 11:01:18
Post by: Voidec on Wed, 30 September 2020, 15:13:54
Post by: SherlockBunny on Thu, 08 October 2020, 18:58:51
Post by: ibabo on Fri, 09 October 2020, 00:06:43
I would like to buy one.
But my concern. Can I have machined in Orthographic prospective?
Thank you
;D
Post by: DoubtsBox on Sat, 10 October 2020, 03:10:12
Post by: Willtato on Sat, 10 October 2020, 06:40:29
Sent from my HD1913 using Tapatalk
Post by: MaiTheSan on Fri, 23 October 2020, 10:38:00
Really quite interested in this. Is that a thick plate?nope, only 1.5mm :>
Sent from my HD1913 using Tapatalk
Post by: mikeyboyy on Tue, 10 November 2020, 02:04:18
Post by: Guvnor on Tue, 10 November 2020, 02:18:44
Post by: TheSeaRabbit on Wed, 11 November 2020, 22:36:58
Post by: bt2108 on Mon, 23 November 2020, 04:17:09
can't wait for your board
Post by: SherlockBunny on Sat, 28 November 2020, 17:59:07
Post by: JoltFX on Sat, 28 November 2020, 18:01:08
“𝙁𝙖𝙞𝙩𝙝 𝙞𝙨 𝙩𝙝𝙚 𝙗𝙞𝙧𝙙 𝙩𝙝𝙖𝙩 𝙛𝙚𝙚𝙡𝙨 𝙩𝙝𝙚 𝙡𝙞𝙜𝙝𝙩 𝙬𝙝𝙚𝙣 𝙩𝙝𝙚 𝙨𝙠𝙮 𝙞𝙨 𝙨𝙩𝙞𝙡𝙡 𝙙𝙞𝙢.”
Post by: luke2fr on Tue, 01 December 2020, 10:18:39
Post by: Julia on Tue, 01 December 2020, 10:34:46
Post by: bagelbyte on Wed, 23 December 2020, 17:35:26
Post by: rooney on Wed, 23 December 2020, 20:54:43
Post by: valen_c13 on Wed, 30 December 2020, 19:39:00
Отправлено с моего HD1913 через Tapatalk
Post by: treeleaf64 on Wed, 30 December 2020, 19:49:49
Post by: Emasterbro on Thu, 31 December 2020, 06:11:37
Post by: FlaminFingers on Thu, 31 December 2020, 15:42:22
Gasket mount would also be really awesome, if possible. I would love it even more if this had a higher typing angle though, since 5 degrees seems really flat imo.
Other than that, the logo looks great and I can't really tell if it's off-center or not as another user mentioned -- looks fine to me.
Can't wait to see all the color options, too!
Great job!
Post by: eljudio42 on Thu, 07 January 2021, 21:15:05
Post by: Kingjunguhn on Fri, 08 January 2021, 05:41:40
Post by: iRetro on Tue, 12 January 2021, 13:38:40
Are you planning any other color options?
Very interested. Can't wait for GB date.
Post by: MaiTheSan on Thu, 14 January 2021, 23:46:58
but it have little bit diffrent from the design
(https://sanprojects.tonikaku.photos/i/2hwb.jpg)
(https://sanprojects.tonikaku.photos/i/zzux.jpg)
Post by: Sicowa on Fri, 15 January 2021, 23:36:11
Pretty cool to see it here. Definitely interested. Do you have a Discord server/ ID to msg for updates?
Would really like to see if there are any other planned colour options.
With the thickness of the plate on the edges I would also like to see a thicker plate option if possible.
GLWIC and I hope to see this in GB on day :thumb:
Post by: Zanhana on Fri, 15 January 2021, 23:45:36
prototype incoming
but it have little bit diffrent from the designShow Image(https://sanprojects.tonikaku.photos/i/2hwb.jpg)Show Image(https://sanprojects.tonikaku.photos/i/zzux.jpg)
so it's not a 65% any more I take it? looks like a 60 with a left macro column going by the plate cutouts.
also what on earth is going on with the right side blocker
Post by: MaiTheSan on Sat, 16 January 2021, 01:00:20
prototype incoming
but it have little bit diffrent from the designShow Image(https://sanprojects.tonikaku.photos/i/2hwb.jpg)Show Image(https://sanprojects.tonikaku.photos/i/zzux.jpg)
so it's not a 65% any more I take it? looks like a 60 with a left macro column going by the plate cutouts.
also what on earth is going on with the right side blocker
it 65%, in factory, they don't know how to assemb this. fix soon
Post by: Zanhana on Sat, 16 January 2021, 08:59:44
prototype incoming
but it have little bit diffrent from the designShow Image(https://sanprojects.tonikaku.photos/i/2hwb.jpg)Show Image(https://sanprojects.tonikaku.photos/i/zzux.jpg)
so it's not a 65% any more I take it? looks like a 60 with a left macro column going by the plate cutouts.
also what on earth is going on with the right side blocker
it 65%, in factory, they don't know how to assemb this. fix soon
I now see that the plate is installed upside down. That makes a lot more sense now that my brain has sorted out the image.
Post by: iRetro on Sat, 16 January 2021, 12:01:49
Post by: MephistoXD on Wed, 10 February 2021, 13:13:23
Post by: fredprinz21 on Sat, 13 February 2021, 16:07:41
charcoal black
teal
sunrise red
thank you and good luck with IC!
Woah! That purple with brass looks really nice, actually it looks gorgeous. Are you considering that a color for the board?I will update after i have prototype :V, can you suggest some color?? :3
Post by: Rx003 on Fri, 19 February 2021, 05:10:23
Post by: genevatypes on Fri, 26 February 2021, 20:38:14
Post by: shpshft on Wed, 17 March 2021, 17:29:48
Post by: nylon on Wed, 02 June 2021, 09:05:14
Post by: YeeticusTexacus1 on Thu, 10 June 2021, 12:28:54
Post by: Timception on Tue, 03 August 2021, 04:40:46
Post by: Tisoy on Mon, 08 November 2021, 17:51:38
Post by: malignant narcissism on Wed, 26 January 2022, 17:54:42