HHKB, brass, AND QMK. Very excited about what's going on here.
Just a suggestion, you should probably put none or 0 on the extras cause some people might misclick or change their mind in the middle of the form. Might cut down on the forms being submitted
Glad to see this in motion!
I had a few questions:
-The standard PCB's can come with QMK too?
-Just to be sure, the HHKB top is for the 1/1.5/7/1.5/1 bottom row layout, correct? I'm just double checking because the render shows the 6u version of the top.
-Also, is the only difference between founders edition and normal edition a numbered weight? If you don't have a Founders Edition, your weight will be clean?
-Also, will all brass parts be coated to prevent tarnishing? There was no option for that, so fingers crossed.
I may have to message you later for some changes, as I'm sure I goofed a bit!
Edit: Are there any color samples? I was wondering what shade of Purple was going to be used.
In! Got any photos of the purple anodization?This is from their previous GB, E8-V1. I am assuming it's the same factory but Exclusive/Jhoang will have to confirm.
is split space bar an option with a steel plate?Yea.is support
is an arrow key cluster possible with a narrow right shift and a modified bottom row?
I will ensure it again.In! Got any photos of the purple anodization?This is from their previous GB, E8-V1. I am assuming it's the same factory but Exclusive/Jhoang will have to confirm.Show Image(http://i.imgur.com/70oiJZ8.jpg)
is split space bar an option with a steel plate?Split space bar? I think no.
is an arrow key cluster possible with a narrow right shift and a modified bottom row?
Submitted order :)
Same, filled out, hope I got founders.
edit: Decided to go with HHKB top, all the brass options, and where not available the new Microarc Oxidation technology you guys talked about. :)
Filled out, hope I got founders!
Sent from my iPhone using Tapatalk
Can we go back and change our options after we've submitted the form?
In for a founders edition HHKB layout with standard PCB. White microarc top and bottom, black middle, white microarc weight, black name plate, carbon fiber plate. Pretty excited.
FINALLY. Glad this is happening!
PM sent to see if I can add on a custom text additional name plate to my order
Is there a album or anything where I can see all the different colors for the aluminum case?
Wondering if it is possible to buy the founder edition from you on Taobao? I don't see an option there...
neither the standard PCB version
Submitted for founders and lots of brass options... Still on the fence if I really want it because lots of brass=more price haha
This buy should be amazing none the less :thumb:
HHKB, brass, AND QMK. Very excited about what's going on here.
Hope I got everything right, sped through that form haha
Order submitted ;D
What part of the case is numbers for founders edition?
Sent from my Pixel using Tapatalk
I notice a few gaps between the pieces on the prototype. Are those sorted out on the final version?
Yeah had to make sure I got in on this buy, but just went with regular layout because hhkb ****s with my problem of wanting things symmetrical.Ah. I will update the render photo for HHKB layout later. Actually it will be 7u spacebar.
Just a suggestion, you should probably put none or 0 on the extras cause some people might misclick or change their mind in the middle of the form. Might cut down on the forms being submitted
Just a suggestion, you should probably put none or 0 on the extras cause some people might misclick or change their mind in the middle of the form. Might cut down on the forms being submitted
I did this too and ended up reloading the form. I think it's silly how google doesn't let you un-click it.
Either way, adding an option for 0 should resolve this.
jhoang:
In the prototype photos, are those Hirose stems in Nixdorf switches? HOLY $|-|1t that is sexy!! I now regret selling off my "extras"...
nice:thumb:
Order submitted.Thanks! :thumb:
Hope to get Founders lel.
Extremely excited for this. How will we know if our custom logo will be accepted?
Also, how much bigger is the case with the standard PCB?
Ordered :thumb:
Will probobly want to add some name plates on soonish, still thinking about it
In! Got any photos of the purple anodization?
In! Got any photos of the purple anodization?This is from their previous GB, E8-V1. I am assuming it's the same factory but Exclusive/Jhoang will have to confirm.Show Image(http://i.imgur.com/70oiJZ8.jpg)
Does the hhkb top use a 6u spacebar? If so why? Every other hhkb custom uses 7u and looks better imo because symmetrical...
edit: and where am I supposed to find a 6u spacebar wire?
Glad to see this in motion!
I had a few questions:
-The standard PCB's can come with QMK too?
-Just to be sure, the HHKB top is for the 1/1.5/7/1.5/1 bottom row layout, correct? I'm just double checking because the render shows the 6u version of the top.
-Also, is the only difference between founders edition and normal edition a numbered weight? If you don't have a Founders Edition, your weight will be clean?
-Also, will all brass parts be coated to prevent tarnishing? There was no option for that, so fingers crossed.
I may have to message you later for some changes, as I'm sure I goofed a bit!
Edit: Are there any color samples? I was wondering what shade of Purple was going to be used.
In addition to the above questions, I noticed there are no indents for bump on feet at the bottom, is it too late to include that if people would like indents?
Also, any chance of grey being an anode color as well? :D
Want...so bad....You've got two kidneys.
Wallet...so weak....
Glad to see this in motion!
I had a few questions:
-The standard PCB's can come with QMK too?
-Just to be sure, the HHKB top is for the 1/1.5/7/1.5/1 bottom row layout, correct? I'm just double checking because the render shows the 6u version of the top.
-Also, is the only difference between founders edition and normal edition a numbered weight? If you don't have a Founders Edition, your weight will be clean?
-Also, will all brass parts be coated to prevent tarnishing? There was no option for that, so fingers crossed.
I may have to message you later for some changes, as I'm sure I goofed a bit!
Edit: Are there any color samples? I was wondering what shade of Purple was going to be used.
In addition to the above questions, I noticed there are no indents for bump on feet at the bottom, is it too late to include that if people would like indents?
Also, any chance of grey being an anode color as well? :D
-The standard PCB's can come with QMK too?
Yes
-Just to be sure, the HHKB top is for the 1/1.5/7/1.5/1 bottom row layout, correct? I'm just double checking because the render shows the 6u version of the top.
Yes! 7u spacebar confirmed!
-Also, is the only difference between founders edition and normal edition a numbered weight? If you don't have a Founders Edition, your weight will be clean?
Yea. That's it! FE edition will be included a BRASS Name Plate. :p
-Also, will all brass parts be coated to prevent tarnishing? There was no option for that, so fingers crossed.
We will polish the brass parts. And we maybe coat a nano surface on them.
-In addition to the above questions, I noticed there are no indents for bump on feet at the bottom, is it too late to include that if people would like indents?
Oh, we fixed it! ;) No worries.
-Also, any chance of grey being an anode color as well? :D
Actually there were too many colors. So grey will not be available this time. :p
Want...so bad....
Wallet...so weak....
any chance for brass plate?Seconded
any chance for brass plate?Seconded
Sent from my iPhone using Tapatalk
Gonna have to fourth that.any chance for brass plate?Seconded
Sent from my iPhone using Tapatalk
Thirded. Having a brass plate takes this from a keyboard I like to a keyboard I think is perfect.
Just a suggestion, you should probably put none or 0 on the extras cause some people might misclick or change their mind in the middle of the form. Might cut down on the forms being submitted
Gonna have to fourth that.any chance for brass plate?Seconded
Sent from my iPhone using Tapatalk
Thirded. Having a brass plate takes this from a keyboard I like to a keyboard I think is perfect.
Sent from my Pixel XL using Tapatalk
Which style is everyone getting? I keep going back and forth between the center and side ports. (I don't care about standard pcb compatibility) I just can't decide which I think would look better.In for centered USB, standard top, black bottom, silver middle, black top, red plate and name thing. I have personally had multiple mx boards in hhkb layout and always find that I would rather just use the HHKB, so going for standard this time.
I also keep going back and forth on the layout. I've been leaning towards HHKB, though I've never tried it. I just built my zeal60 with split right shift and I know I can adjust to that. I think I could get used to the rest of the changes and I know I never use the menu or right ctrl, so that's no big deal. My real concern is just how hard it will be to switch back and forth. Can those of you using hhkb still use ansi easily?
That said, I'm still thinking HHKB, because if nothing else I'm buying a white case with black accents for looks and hhkb will look better. Out of curiosity, could we purchase both tops/plates? (probably too expensive to be sensible, but you never know).
Which style is everyone getting? I keep going back and forth between the center and side ports. (I don't care about standard pcb compatibility) I just can't decide which I think would look better.Chose the best option which u can get used to it :thumb:
I also keep going back and forth on the layout. I've been leaning towards HHKB, though I've never tried it. I just built my zeal60 with split right shift and I know I can adjust to that. I think I could get used to the rest of the changes and I know I never use the menu or right ctrl, so that's no big deal. My real concern is just how hard it will be to switch back and forth. Can those of you using hhkb still use ansi easily?
That said, I'm still thinking HHKB, because if nothing else I'm buying a white case with black accents for looks and hhkb will look better. Out of curiosity, could we purchase both tops/plates? (probably too expensive to be sensible, but you never know).
Which style is everyone getting? I keep going back and forth between the center and side ports. (I don't care about standard pcb compatibility) I just can't decide which I think would look better.White apple anode and brass everything else with SS plate and hhkb top. I love the hhkb layout and I use multiple boards a week without it, my absolute favorite layout. Also centered usb because it was the original design and the case is more optimized space wise.
I also keep going back and forth on the layout. I've been leaning towards HHKB, though I've never tried it. I just built my zeal60 with split right shift and I know I can adjust to that. I think I could get used to the rest of the changes and I know I never use the menu or right ctrl, so that's no big deal. My real concern is just how hard it will be to switch back and forth. Can those of you using hhkb still use ansi easily?
That said, I'm still thinking HHKB, because if nothing else I'm buying a white case with black accents for looks and hhkb will look better. Out of curiosity, could we purchase both tops/plates? (probably too expensive to be sensible, but you never know).
Which style is everyone getting? I keep going back and forth between the center and side ports. (I don't care about standard pcb compatibility) I just can't decide which I think would look better.
I also keep going back and forth on the layout. I've been leaning towards HHKB, though I've never tried it. I just built my zeal60 with split right shift and I know I can adjust to that. I think I could get used to the rest of the changes and I know I never use the menu or right ctrl, so that's no big deal. My real concern is just how hard it will be to switch back and forth. Can those of you using hhkb still use ansi easily?
That said, I'm still thinking HHKB, because if nothing else I'm buying a white case with black accents for looks and hhkb will look better. Out of curiosity, could we purchase both tops/plates? (probably too expensive to be sensible, but you never know).
This is a gorgeous keyboard... I'm lusting. I'm drooling. I'm a little concerned.I 100% agree. I would also feel much more comfortable if the invoice due date was after people recieve their E8's, to confirm quality expectations.
I am in the E8-V1 buy and could not be more excited about getting that board. These guys have been really innovative and I love the finishes they have offered as well as the chance to personalize the board with lots of color combinations and custom engraving.
However...
1) we have not seen those E8s in the wild yet.... would have been really nice to have one data point on a successful board delivery before deciding to jump in round two or not. Such is life, I suppose… I can get over that and the production pictures look awesome. I personally do 100% believe in the E-Team to deliver high-quality boards.
2) communication has not been stellar. Through the (expected, obviously) delays, we've been a bit left for want of information. The assembly invoices were more than a bit confusing… I got one when not asking for assembly and it seems that some folks are still wondering about assembly details as boards are scheduled to start shipping in the next couple of weeks. There are a couple posts of frustration in that thread regarding open questions/unanswered messages while this thread was being posted.
You should know that I am a pathological optimist and it is usually my challenge to temper that. I very much love this design and the board and as I said, I'm lusting. I suppose I just want some assurance from jhoang, etc that the buy will be run with just a bit more attention than the E8.
I submitted a form last night but haven't gotten my invoice yet. Is this atypical? Not trying to miss out on this GB.
I submitted a form last night but haven't gotten my invoice yet. Is this atypical? Not trying to miss out on this GB.Invoices go out after the buy closes :)
ignore mehehe
ignore mehehe
Sent from my iPhone using Tapatalk
ignore me
I submitted a form last night but haven't gotten my invoice yet. Is this atypical? Not trying to miss out on this GB.Invoices go out after the buy closes :)
what is up dudeignore mehehe
Sent from my iPhone using Tapatalk
this is like the 3rd time this has happened
i just wanna be helpful pls
what is up dudeignore mehehe
Sent from my iPhone using Tapatalk
this is like the 3rd time this has happened
i just wanna be helpful pls
:thumb:what is up dudeignore mehehe
Sent from my iPhone using Tapatalk
this is like the 3rd time this has happened
i just wanna be helpful pls
nothing is up just keep runnin your gb my dude
very good keyboard i might order one
This is a gorgeous keyboard... I'm lusting. I'm drooling. I'm a little concerned.Very sorry to heard what u said/
I am in the E8-V1 buy and could not be more excited about getting that board. These guys have been really innovative and I love the finishes they have offered as well as the chance to personalize the board with lots of color combinations and custom engraving.
However...
1) we have not seen those E8s in the wild yet.... would have been really nice to have one data point on a successful board delivery before deciding to jump in round two or not. Such is life, I suppose… I can get over that and the production pictures look awesome. I personally do 100% believe in the E-Team to deliver high-quality boards.
2) communication has not been stellar. Through the (expected, obviously) delays, we've been a bit left for want of information. The assembly invoices were more than a bit confusing… I got one when not asking for assembly and it seems that some folks are still wondering about assembly details as boards are scheduled to start shipping in the next couple of weeks. There are a couple posts of frustration in that thread regarding open questions/unanswered messages while this thread was being posted.
You should know that I am a pathological optimist and it is usually my challenge to temper that. I very much love this design and the board and as I said, I'm lusting. I suppose I just want some assurance from jhoang, etc that the buy will be run with just a bit more attention than the E8.
Will be getting a spreadsheet with all the orders before the buy closes? Just want to make sure my changes were read, thanks!Yes,b4 sent invoice it will have a table to check out .
Are there any pictures of the standard and center USB layout back to back? The height difference has got me thinking I might go for the center option.Is only have center USB for prototype
Also, what is the E-Team website?
Are there any pictures of the standard and center USB layout back to back? The height difference has got me thinking I might go for the center option.
Also, what is the E-Team website?
Welp, I did it. Count me in for the premium board and the wallet suffering. :thumb:Well,just let the wallet suffering :)) :))
Welp, I did it. Count me in for the premium board and the wallet suffering. :thumb:Well,just let the wallet suffering :)) :))
It would be great if you could post the list of orders so everyone can check if their order is correct before invoices go out.It will , after close orders no worries.
Also, did the Founders transfer I asked for in the form, which was confirmed by the person who it should have been tramsfered from, work out?
It would be great if you could post the list of orders so everyone can check if their order is correct before invoices go out.It will , after close orders no worries.
Also, did the Founders transfer I asked for in the form, which was confirmed by the person who it should have been tramsfered from, work out?
This is a gorgeous keyboard... I'm lusting. I'm drooling. I'm a little concerned.Very sorry to heard what u said/
I am in the E8-V1 buy and could not be more excited about getting that board. These guys have been really innovative and I love the finishes they have offered as well as the chance to personalize the board with lots of color combinations and custom engraving.
However...
1) we have not seen those E8s in the wild yet.... would have been really nice to have one data point on a successful board delivery before deciding to jump in round two or not. Such is life, I suppose… I can get over that and the production pictures look awesome. I personally do 100% believe in the E-Team to deliver high-quality boards.
2) communication has not been stellar. Through the (expected, obviously) delays, we've been a bit left for want of information. The assembly invoices were more than a bit confusing… I got one when not asking for assembly and it seems that some folks are still wondering about assembly details as boards are scheduled to start shipping in the next couple of weeks. There are a couple posts of frustration in that thread regarding open questions/unanswered messages while this thread was being posted.
You should know that I am a pathological optimist and it is usually my challenge to temper that. I very much love this design and the board and as I said, I'm lusting. I suppose I just want some assurance from jhoang, etc that the buy will be run with just a bit more attention than the E8.
Can someone confirm that this image is the white anodization?Show Image(http://i.imgur.com/TizBu1G.jpg)
Can someone confirm that this image is the white anodization?Show Image(http://i.imgur.com/TizBu1G.jpg)Show Image(https://lh6.googleusercontent.com/x4iLMUPdKxiZ6wpI1IfwPuxfmj7tnX5RZLZX5beVADL0GbM7UU99lDGqnJA2bJqkBb6dqAnFFQ=w3936)
Can someone confirm that this image is the white anodization?Show Image(http://i.imgur.com/TizBu1G.jpg)Show Image(https://lh6.googleusercontent.com/x4iLMUPdKxiZ6wpI1IfwPuxfmj7tnX5RZLZX5beVADL0GbM7UU99lDGqnJA2bJqkBb6dqAnFFQ=w3936)
oh **** duh.. I saw that today and missed it this evening.. Dope. Thanks :) I think I will go with that option over the MOA.
Can someone confirm that this image is the white anodization?Show Image(http://i.imgur.com/TizBu1G.jpg)Show Image(https://lh6.googleusercontent.com/x4iLMUPdKxiZ6wpI1IfwPuxfmj7tnX5RZLZX5beVADL0GbM7UU99lDGqnJA2bJqkBb6dqAnFFQ=w3936)
oh **** duh.. I saw that today and missed it this evening.. Dope. Thanks :) I think I will go with that option over the MOA.
No problem. I'm still debating whether or not I should stick to silver or change my order to white.
Can someone confirm that this image is the white anodization?Show Image(http://i.imgur.com/TizBu1G.jpg)Show Image(https://lh6.googleusercontent.com/x4iLMUPdKxiZ6wpI1IfwPuxfmj7tnX5RZLZX5beVADL0GbM7UU99lDGqnJA2bJqkBb6dqAnFFQ=w3936)
oh **** duh.. I saw that today and missed it this evening.. Dope. Thanks :) I think I will go with that option over the MOA.
No problem. I'm still debating whether or not I should stick to silver or change my order to white.
Same here--The apple silver just looks so goooood
Hi everyone. I will give some small information base as a member of E-Team.
1- What different between two versions of E6-V2: one is the original design, and the other is Poker-compatible. The original design just optimize the Poker version, so it will be little smaller (but will look more sexy, believe me!!). We try to make it look classic, but with some RGB LED under. If you are using your old PCB, RGB may not work functionlly. Both version have same high and angle. Here is my quick renderShow Image(http://i.imgur.com/Vrh82ia.png)Show Image(http://i.imgur.com/Vxj1VnD.png)
Both version will be made in same factory, so quality is the same. We will sell PCB (for backup) on our website (under contruction now), after GB end. Part of E8-V1 will be there too.
2: Why is E6-V2? We already designed E6-V1 with same design as E8-V1, but as schedule, we want to make E6-V2 first, due to her sexy body :D
3: How about E8-V1: all plate was fix by CNC factory, but we have to queue at anode factory. It only take about 30mins - 1 hour for anode, but 1-2 weeks for queue. Very sorry about that. We already finish checking the case, PCB, weight, nametag by ourself to make everything perfect. Now only waiting for the plate. All assem order will be more delayed.
4: Color of E6-V2: not so much color for E6-V2, but with 4 parts, you can mix to your demand. It's fun, and you can change your order as much as possible beforce GB end.
We are very sorry about keep communicate with you. We are trying to do it better, day by day.
Thank you so much.
Hi everyone. I will give some small information base as a member of E-Team.
1- What different between two versions of E6-V2: one is the original design, and the other is Poker-compatible. The original design just optimize the Poker version, so it will be little smaller (but will look more sexy, believe me!!). We try to make it look classic, but with some RGB LED under. If you are using your old PCB, RGB may not work functionlly. Both version have same high and angle. Here is my quick renderShow Image(http://i.imgur.com/Vrh82ia.png)
Yep,the brass going to be polished and shiny.Show Image(http://i.imgur.com/Vxj1VnD.png)
Both version will be made in same factory, so quality is the same. We will sell PCB (for backup) on our website (under contruction now), after GB end. Part of E8-V1 will be there too.
2: Why is E6-V2? We already designed E6-V1 with same design as E8-V1, but as schedule, we want to make E6-V2 first, due to her sexy body :D
3: How about E8-V1: all plate was fix by CNC factory, but we have to queue at anode factory. It only take about 30mins - 1 hour for anode, but 1-2 weeks for queue. Very sorry about that. We already finish checking the case, PCB, weight, nametag by ourself to make everything perfect. Now only waiting for the plate. All assem order will be more delayed.
4: Color of E6-V2: not so much color for E6-V2, but with 4 parts, you can mix to your demand. It's fun, and you can change your order as much as possible beforce GB end.
We are very sorry about keep communicate with you. We are trying to do it better, day by day.
Thank you so much.
Thank you for update! This sounds good.
One question...
Is the brass going to be polished and shiny?
EDIT: I see you answered already above. Polished and maybe nano-coating. Excellent!
I am just submitting a change to my original order :)
It's fun, and you can change your order as much as possible beforce GB end.
i missed where and what the "counter weight" is?(http://i.imgur.com/djB9V7L.jpg?1)
Can someone confirm that this image is the white anodization?Show Image(http://i.imgur.com/TizBu1G.jpg)Show Image(https://lh6.googleusercontent.com/x4iLMUPdKxiZ6wpI1IfwPuxfmj7tnX5RZLZX5beVADL0GbM7UU99lDGqnJA2bJqkBb6dqAnFFQ=w3936)
oh **** duh.. I saw that today and missed it this evening.. Dope. Thanks :) I think I will go with that option over the MOA.
No problem. I'm still debating whether or not I should stick to silver or change my order to white.
Same here--The apple silver just looks so goooood
Yea... Am either doing MOA white with the apple white mid, or going apple white, with a brass or purple mid..
i missed where and what the "counter weight" is?Show Image(http://i.imgur.com/djB9V7L.jpg?1)
See that thicc slab of brass? That's the (counter-)weight
Can someone confirm that this image is the white anodization?Show Image(http://i.imgur.com/TizBu1G.jpg)Show Image(https://lh6.googleusercontent.com/x4iLMUPdKxiZ6wpI1IfwPuxfmj7tnX5RZLZX5beVADL0GbM7UU99lDGqnJA2bJqkBb6dqAnFFQ=w3936)
oh **** duh.. I saw that today and missed it this evening.. Dope. Thanks :) I think I will go with that option over the MOA.
No problem. I'm still debating whether or not I should stick to silver or change my order to white.
Same here--The apple silver just looks so goooood
Yea... Am either doing MOA white with the apple white mid, or going apple white, with a brass or purple mid..
Looks like I also have to change my order from White micro-arc oxidation to White anodized. The anodised one looks "whiter" then the MOA and I want to pair it with a brass middle piece for nice contrast. Thinking about pairing it with the zeal60 pcb and a brass hhkb plate I have from mekanisk. There are so many options :-\
Looks like I also have to change my order from White micro-arc oxidation to White anodized. The anodised one looks "whiter" then the MOA and I want to pair it with a brass middle piece for nice contrast. Thinking about pairing it with the zeal60 pcb and a brass hhkb plate I have from mekanisk. There are so many options :-\
Am doing this exactly. Except didn’t know mekanisk had brass hhkb plates. Thanks for the tip :)
Hi everyone. I will give some small information base as a member of E-Team.
1- What different between two versions of E6-V2: one is the original design, and the other is Poker-compatible. The original design just optimize the Poker version, so it will be little smaller (but will look more sexy, believe me!!). We try to make it look classic, but with some RGB LED under. If you are using your old PCB, RGB may not work functionlly. Both version have same high and angle. Here is my quick renderShow Image(http://i.imgur.com/Vrh82ia.png)Show Image(http://i.imgur.com/Vxj1VnD.png)
Both version will be made in same factory, so quality is the same. We will sell PCB (for backup) on our website (under contruction now), after GB end. Part of E8-V1 will be there too.
2: Why is E6-V2? We already designed E6-V1 with same design as E8-V1, but as schedule, we want to make E6-V2 first, due to her sexy body :D
3: How about E8-V1: all plate was fix by CNC factory, but we have to queue at anode factory. It only take about 30mins - 1 hour for anode, but 1-2 weeks for queue. Very sorry about that. We already finish checking the case, PCB, weight, nametag by ourself to make everything perfect. Now only waiting for the plate. All assem order will be more delayed.
4: Color of E6-V2: not so much color for E6-V2, but with 4 parts, you can mix to your demand. It's fun, and you can change your order as much as possible beforce GB end.
We are very sorry about keep communicate with you. We are trying to do it better, day by day.
Thank you so much.
Hi everyone. I will give some small information base as a member of E-Team.
1- What different between two versions of E6-V2: one is the original design, and the other is Poker-compatible. The original design just optimize the Poker version, so it will be little smaller (but will look more sexy, believe me!!). We try to make it look classic, but with some RGB LED under. If you are using your old PCB, RGB may not work functionlly. Both version have same high and angle. Here is my quick renderShow Image(http://i.imgur.com/Vrh82ia.png)Show Image(http://i.imgur.com/Vxj1VnD.png)
Both version will be made in same factory, so quality is the same. We will sell PCB (for backup) on our website (under contruction now), after GB end. Part of E8-V1 will be there too.
2: Why is E6-V2? We already designed E6-V1 with same design as E8-V1, but as schedule, we want to make E6-V2 first, due to her sexy body :D
3: How about E8-V1: all plate was fix by CNC factory, but we have to queue at anode factory. It only take about 30mins - 1 hour for anode, but 1-2 weeks for queue. Very sorry about that. We already finish checking the case, PCB, weight, nametag by ourself to make everything perfect. Now only waiting for the plate. All assem order will be more delayed.
4: Color of E6-V2: not so much color for E6-V2, but with 4 parts, you can mix to your demand. It's fun, and you can change your order as much as possible beforce GB end.
We are very sorry about keep communicate with you. We are trying to do it better, day by day.
Thank you so much.
Just to clarify, because I think the wording is causing confusion.
The standard version that can use any normal (left side usb) PCB, will still be TOP MOUNT, correct?
Calling it Pok3r compatible will make people think it's tray mount. :(
Also, is the nano coating on brass guaranteed? I would love confirmation on this.
Also, color grey anode please!
Edit: Will you guys be able to offer brass switch plates please? <3
Will we be able to modify our orders after 8/4? I'd would like to resubbmit form, but not sure if we got founders' spot or not.We will check it
I will updata the purple color sampleHi everyone. I will give some small information base as a member of E-Team.
1- What different between two versions of E6-V2: one is the original design, and the other is Poker-compatible. The original design just optimize the Poker version, so it will be little smaller (but will look more sexy, believe me!!). We try to make it look classic, but with some RGB LED under. If you are using your old PCB, RGB may not work functionlly. Both version have same high and angle. Here is my quick renderShow Image(http://i.imgur.com/Vrh82ia.png)Show Image(http://i.imgur.com/Vxj1VnD.png)
Both version will be made in same factory, so quality is the same. We will sell PCB (for backup) on our website (under contruction now), after GB end. Part of E8-V1 will be there too.
2: Why is E6-V2? We already designed E6-V1 with same design as E8-V1, but as schedule, we want to make E6-V2 first, due to her sexy body :D
3: How about E8-V1: all plate was fix by CNC factory, but we have to queue at anode factory. It only take about 30mins - 1 hour for anode, but 1-2 weeks for queue. Very sorry about that. We already finish checking the case, PCB, weight, nametag by ourself to make everything perfect. Now only waiting for the plate. All assem order will be more delayed.
4: Color of E6-V2: not so much color for E6-V2, but with 4 parts, you can mix to your demand. It's fun, and you can change your order as much as possible beforce GB end.
We are very sorry about keep communicate with you. We are trying to do it better, day by day.
Thank you so much.
Just to clarify, because I think the wording is causing confusion.
The standard version that can use any normal (left side usb) PCB, will still be TOP MOUNT, correct?
Calling it Pok3r compatible will make people think it's tray mount. :(
Also, is the nano coating on brass guaranteed? I would love confirmation on this.
Also, color grey anode please!
Edit: Will you guys be able to offer brass switch plates please? <3
Would like to add to this:
So, the original has the curve on the bottom where LED glow will shine through.
Does the Standard (poker style case) have the curved bottoms as well or is it flat? If not, is it not possible to have the curved bottom edge on both it is much nicer?
Just added a second purple middle.. Hoping it's a nice deep/dark purple :D Can you confirm with a sample image what shade of purple?
UPDATA THE FOUNDERS EDITION
sorry for that ,i am not the poster couldnt get the existing table.
i am trying all get the old table ,hope it help
if u guys want change pls declare is final sumbbit .let me know is ur resumbbit
You might want to delete that list with everyone's personal name, and reupload with their Username (Account ID) instead of their Real Name. :eek: :eek:yep i know it but the table what i get is not have user name
Congrats to everyone on the Founders list.
Is there an example of what the founders weight looks like?
Also resubmitted, hope that slot transfer works (you got a few PMs from the person transfering his slot to me). He entered for me because I was asleep when it was approvedYea i get it
However, u guys can wait jhoang post the updating tableYou might want to delete that list with everyone's personal name, and reupload with their Username (Account ID) instead of their Real Name. :eek: :eek:yep i know it but the table what i get is not have user name
Congrats to everyone on the Founders list.
Is there an example of what the founders weight looks like?
Where is the link to the table? Was it removed?
Will we still have some time to choose top plate style>? i keep going back and forth between hhkb and standard, and im not sure i can decide quite yet lol.It have much time
Hi everyone. I will give some small information base as a member of E-Team.
1- What different between two versions of E6-V2: one is the original design, and the other is Poker-compatible. The original design just optimize the Poker version, so it will be little smaller (but will look more sexy, believe me!!). We try to make it look classic, but with some RGB LED under. If you are using your old PCB, RGB may not work functionlly. Both version have same high and angle. Here is my quick renderShow Image(http://i.imgur.com/Vrh82ia.png)Show Image(http://i.imgur.com/Vxj1VnD.png)
Both version will be made in same factory, so quality is the same. We will sell PCB (for backup) on our website (under contruction now), after GB end. Part of E8-V1 will be there too.
2: Why is E6-V2? We already designed E6-V1 with same design as E8-V1, but as schedule, we want to make E6-V2 first, due to her sexy body :D
3: How about E8-V1: all plate was fix by CNC factory, but we have to queue at anode factory. It only take about 30mins - 1 hour for anode, but 1-2 weeks for queue. Very sorry about that. We already finish checking the case, PCB, weight, nametag by ourself to make everything perfect. Now only waiting for the plate. All assem order will be more delayed.
4: Color of E6-V2: not so much color for E6-V2, but with 4 parts, you can mix to your demand. It's fun, and you can change your order as much as possible beforce GB end.
We are very sorry about keep communicate with you. We are trying to do it better, day by day.
Thank you so much.
Just to clarify, because I think the wording is causing confusion.
The standard version that can use any normal (left side usb) PCB, will still be TOP MOUNT, correct?
Calling it Pok3r compatible will make people think it's tray mount. :(
Also, is the nano coating on brass guaranteed? I would love confirmation on this.
Also, color grey anode please!
Edit: Will you guys be able to offer brass switch plates please? <3
Grey actually is diffcult color may not availableHi everyone. I will give some small information base as a member of E-Team.
1- What different between two versions of E6-V2: one is the original design, and the other is Poker-compatible. The original design just optimize the Poker version, so it will be little smaller (but will look more sexy, believe me!!). We try to make it look classic, but with some RGB LED under. If you are using your old PCB, RGB may not work functionlly. Both version have same high and angle. Here is my quick renderShow Image(http://i.imgur.com/Vrh82ia.png)Show Image(http://i.imgur.com/Vxj1VnD.png)
Both version will be made in same factory, so quality is the same. We will sell PCB (for backup) on our website (under contruction now), after GB end. Part of E8-V1 will be there too.
2: Why is E6-V2? We already designed E6-V1 with same design as E8-V1, but as schedule, we want to make E6-V2 first, due to her sexy body :D
3: How about E8-V1: all plate was fix by CNC factory, but we have to queue at anode factory. It only take about 30mins - 1 hour for anode, but 1-2 weeks for queue. Very sorry about that. We already finish checking the case, PCB, weight, nametag by ourself to make everything perfect. Now only waiting for the plate. All assem order will be more delayed.
4: Color of E6-V2: not so much color for E6-V2, but with 4 parts, you can mix to your demand. It's fun, and you can change your order as much as possible beforce GB end.
We are very sorry about keep communicate with you. We are trying to do it better, day by day.
Thank you so much.
Just to clarify, because I think the wording is causing confusion.
The standard version that can use any normal (left side usb) PCB, will still be TOP MOUNT, correct?
Calling it Pok3r compatible will make people think it's tray mount. :(
Also, is the nano coating on brass guaranteed? I would love confirmation on this.
Also, color grey anode please!
Edit: Will you guys be able to offer brass switch plates please? <3
If you'd offer grey anode and brass plate, I switched in an instant! Also nanocaoting, PLEASE!
U guys pm to jhoang i cant answer it
it only to wait him reply
so is brass plate out of the question?
so is brass plate out of the question?
+1 for this... would be really nice since everything else is going to be brass-ified on this bad boy. Would also be interested in a polycarbonate option if that could be added.
so is brass plate out of the question?
+1 for this... would be really nice since everything else is going to be brass-ified on this bad boy. Would also be interested in a polycarbonate option if that could be added.
Polycarb plate is already an option though
Bumpso is brass plate out of the question?
+1 for this... would be really nice since everything else is going to be brass-ified on this bad boy. Would also be interested in a polycarbonate option if that could be added.
Bumpso is brass plate out of the question?
+1 for this... would be really nice since everything else is going to be brass-ified on this bad boy. Would also be interested in a polycarbonate option if that could be added.
Is it one plate for both standard and hhkb or is there an hhkb plate with blockers?(if so will it still support ansi backspace? I'm still not sold on moving it down a row. )
Sent from my iPad using Tapatalk
Do you have a picture of the purple? I ordered a purple middle just want to make sure it’s darker than the e8 purple that was offered. Thank you. Grey looks nice. Too bad!The color for sample will update later .
the grey color for sample
not available.
the grey color for sample
not available.
That looks so good! I don't know what to make of that post though. You have one already made in grey? And you do not make it available because of costs or logistics or exclusiveness?
Yep just got a top for greythe grey color for sample
not available.
That looks so good! I don't know what to make of that post though. You have one already made in grey? And you do not make it available because of costs or logistics or exclusiveness?
Jhoang has not been on Geekhack since August 3rd. Is he busy with e8-v1 or something else??
Sent from my Pixel using Tapatalk
Ya a little nervous that's allJhoang has not been on Geekhack since August 3rd. Is he busy with e8-v1 or something else??
Sent from my Pixel using Tapatalk
That’s a whole 24 and some lol. You make it sound like hes disappeared for months. Just be patient.... he will respond.
Ya a little nervous that's allJhoang has not been on Geekhack since August 3rd. Is he busy with e8-v1 or something else??
Sent from my Pixel using Tapatalk
That’s a whole 24 and some lol. You make it sound like hes disappeared for months. Just be patient.... he will respond.
Sent from my Pixel using Tapatalk
Jhoang has not been on Geekhack since August 3rd. Is he busy with e8-v1 or something else??I dont know it at all
Sent from my Pixel using Tapatalk
HEY GUYS!!!
I was so busy last 2 weeks.
Today, I want to inform everyone that E8 will be delivered to my house tomorrow!
I will reply to your PMs soon.
So sorry for the delay!
Name plate:Show Image(http://i.imgur.com/dvY2ukP.jpg)
Packages from Exclusive in China:Show Image(http://i.imgur.com/zLJ9kyk.jpg)
Is the sameHEY GUYS!!!
I was so busy last 2 weeks.
Today, I want to inform everyone that E8 will be delivered to my house tomorrow!
I will reply to your PMs soon.
So sorry for the delay!
Name plate:Show Image(http://i.imgur.com/dvY2ukP.jpg)
Packages from Exclusive in China:Show Image(http://i.imgur.com/zLJ9kyk.jpg)
Is this what the writing on the E6-v2 plates will look like too? I like this alot more than the blocky print i saw in one of the albums.
I have to say that excluisve is trying so hard to make E8-V1 and E6-V2 to come as soon as possible.Thanks all and the ppl who support me honestly
a little gift to youShow Image(http://i.imgur.com/GB405Gw.jpg)
Order submitted ;DGreat job :thumb:
I got a little bit confused, is the group buy still running and I can still submit an order, or it is already finished?Still available
Never I did figured it out in the interest check, still mulling over a color: white or silver. This is looking great!white i think is great for u
Sorry that it's super late, but I resubmitted for a change!Never mind
Sorry that it's super late, but I resubmitted for a change!Never mind
Is there an estimated time we can expect to be invoiced?Almost 15/08
Is there an estimated time we can expect to be invoiced?Almost 15/08
Yep it will post sheet later wait jhoangIs there an estimated time we can expect to be invoiced?Almost 15/08
Cool. can we edit our order form before that date?
Is there an estimated time we can expect to be invoiced?Almost 15/08
Expected timeline:
- Group Buy opens: July 28, 2017
- Group Buy closes: August 03, 2017
- Deadline for payments: August 15, 2017
- Keyboards will be shipped out: Early October, 2017
You are right invoice will sent later daysIs there an estimated time we can expect to be invoiced?Almost 15/08
15th August is the deadline for the invoice, and 3rd August is supposed to be the deadline for the groupbuy:Expected timeline:
- Group Buy opens: July 28, 2017
- Group Buy closes: August 03, 2017
- Deadline for payments: August 15, 2017
- Keyboards will be shipped out: Early October, 2017
Shouldn't the groupbuy be ended and we should have received the invoice by now? Or am I being silly here :p
Hello ,guys i need tell somethings later :thumb:
Hey guys,
Thank you for your participation!
I'm sorting the table.
I will send the invoices today.
Hey guys,
Thank you for your participation!
I'm sorting the table.
I will send the invoices today.
Hey guys,
Thank you for your participation!
I'm sorting the table.
I will send the invoices today.
Hi jhoang!
This is good news. However, is there any way we can have a few hours with the spreadsheet up before you go to invoicing? There are lots of options and I know I was unsure on a couple and forgot what I've picked on others. It would lead to fewer invoice changes/ updates if we could kindly have a look at the order sheet.
jhoang, i am wondering if you will fulfill your E8-V1 orders before you collect money from people on this group buy. i understand there may be some issues...
Hey guys,
Thank you for your participation!
I'm sorting the table.
I will send the invoices today.
Hi jhoang!
This is good news. However, is there any way we can have a few hours with the spreadsheet up before you go to invoicing? There are lots of options and I know I was unsure on a couple and forgot what I've picked on others. It would lead to fewer invoice changes/ updates if we could kindly have a look at the order sheet.
Please check it!jhoang, i am wondering if you will fulfill your E8-V1 orders before you collect money from people on this group buy. i understand there may be some issues...
Yea. I will update on current status of E8-V1 in E8 thread. But it's all about the plates issue. I fixed the plates and shipped to China for anodizing. But shipping service is being delayed due to some problems with logistics. :(
Holy crap, why is shipping to germany so much more expensive than you mentioned in the opening post? That's even more than I paid for a 4.5kg package from Korea.
Hey guys,
I have just finished sorting your orders.
Please check it here: https://goo.gl/ECrWvU
I'm gonna check your comments and PMs now.
Then I will send the invoices soon.
Please check your orders again and let me know if there is any problems
Kafka and I would like to switch our numbers if possible, so that he has 13 and I have 26.Yep yep, please make sure this happens before invoicing
Can we get a sample of the purple?
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
Holy crap, why is shipping to germany so much more expensive than you mentioned in the opening post? That's even more than I paid for a 4.5kg package from Korea.
And $60 shipping to the US is kinda crazy too...
Edit: Revo RJ shipping was $40
I agree with Kafka, is there a reason why the shipping is $60+? Revo and ALF both charged $40 or so to ship boards from China to the States..
Can we get a sample of the purple?The purple sample i will update tomorrow .
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
Also what's happening with the brass stuff? Polished, Nano Coated, Raw..?Coated and polished is okay we will choose one in the end
Sent from my iPhone using Tapatalk
Thanks .my friend great job :thumb:Holy crap, why is shipping to germany so much more expensive than you mentioned in the opening post? That's even more than I paid for a 4.5kg package from Korea.
And $60 shipping to the US is kinda crazy too...
Edit: Revo RJ shipping was $40
I agree with Kafka, is there a reason why the shipping is $60+? Revo and ALF both charged $40 or so to ship boards from China to the States..
Pretty sure this ships from Veitnam. Vietnam's shipping prices are REALLY high, especially outside of SEA. Here's the DHL Table in VND. Other shipping companies might be cheaper, but I suspect not by much. For reference, 1m VND is ~44 USD.Show Image(http://i.imgur.com/WgATc87.png)
Notable countries include USA & Canada (Zone 7), Germany (Zone 8 ), and Brazil (Zone 10).
THIS IS ONLY AN EXAMPLE, don't take these numbers as gospel, thanks.
could you extend payment date, so that us that are on the e8 gb can receive their boards first?It should be
Thanks .my friend great job :thumb:Holy crap, why is shipping to germany so much more expensive than you mentioned in the opening post? That's even more than I paid for a 4.5kg package from Korea.
And $60 shipping to the US is kinda crazy too...
Edit: Revo RJ shipping was $40
I agree with Kafka, is there a reason why the shipping is $60+? Revo and ALF both charged $40 or so to ship boards from China to the States..
Pretty sure this ships from Veitnam. Vietnam's shipping prices are REALLY high, especially outside of SEA. Here's the DHL Table in VND. Other shipping companies might be cheaper, but I suspect not by much. For reference, 1m VND is ~44 USD.Show Image(http://i.imgur.com/WgATc87.png)
Notable countries include USA & Canada (Zone 7), Germany (Zone 8 ), and Brazil (Zone 10).
THIS IS ONLY AN EXAMPLE, don't take these numbers as gospel, thanks.
I think the shipping costs are fine. People for some reason really don't understand just how expensive international postage can be.
I have not expected shipping to germany to be that expensive! I might think about having it shipped to family in china instead. But waiting another six months to save 80$? No chance. :p
Would it be cheaper to send all german packages to one guy for him to distribute them further?
I have not expected shipping to germany to be that expensive! I might think about having it shipped to family in china instead. But waiting another six months to save 80$? No chance. :p
Would it be cheaper to send all german packages to one guy for him to distribute them further?
I have not expected shipping to germany to be that expensive! I might think about having it shipped to family in china instead. But waiting another six months to save 80$? No chance. :p
Would it be cheaper to send all german packages to one guy for him to distribute them further?
Probably, according to this list I found for ems pricing from Vietnam:Show Image(https://puu.sh/x59To/2a3278152b.png)
it probably would be $170-180 so $45 per person. Adding 5€ for DHL Paket National we'd still be way below $80-90...
The real pain would be customs though.
I have not expected shipping to germany to be that expensive! I might think about having it shipped to family in china instead. But waiting another six months to save 80$? No chance. :p
Would it be cheaper to send all german packages to one guy for him to distribute them further?
Probably, according to this list I found for ems pricing from Vietnam:Show Image(https://puu.sh/x59To/2a3278152b.png)
it probably would be $170-180 so $45 per person. Adding 5€ for DHL Paket National we'd still be way below $80-90...
The real pain would be customs though.
Since there are no import fees for keyboards, we only have to pay 19% VAT. So the one picking up the 4 boards at customs had to pay about 400$ VAT.
jhoang, i am wondering if you will fulfill your E8-V1 orders before you collect money from people on this group buy. i understand there may be some issues...
Yea. I will update on current status of E8-V1 in E8 thread. But it's all about the plates issue. I fixed the plates and shipped to China for anodizing. But shipping service is being delayed due to some problems with logistics. :(
Wait for himjhoang, i am wondering if you will fulfill your E8-V1 orders before you collect money from people on this group buy. i understand there may be some issues...
Yea. I will update on current status of E8-V1 in E8 thread. But it's all about the plates issue. I fixed the plates and shipped to China for anodizing. But shipping service is being delayed due to some problems with logistics. :(
still have not seen and update from jhoang in the E8 thread.
Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?
My pleasure.Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?
YES! Thank you. So nice :) :eek: :D
My pleasure.Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?
YES! Thank you. So nice :) :eek: :D
Yep almost like thisMy pleasure.Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?
YES! Thank you. So nice :) :eek: :D
The saturation seems a little heavy in those pictures. Would you say in a darker setting it might look more like this?
http://www.philwood.com/products/hubspgs/colors/purp.jpg (http://www.philwood.com/products/hubspgs/colors/purp.jpg)
Yep almost like thisMy pleasure.Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?
YES! Thank you. So nice :) :eek: :D
The saturation seems a little heavy in those pictures. Would you say in a darker setting it might look more like this?
http://www.philwood.com/products/hubspgs/colors/purp.jpg (http://www.philwood.com/products/hubspgs/colors/purp.jpg)
Ah, it is😶Yep almost like thisMy pleasure.Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?
YES! Thank you. So nice :) :eek: :D
The saturation seems a little heavy in those pictures. Would you say in a darker setting it might look more like this?
http://www.philwood.com/products/hubspgs/colors/purp.jpg (http://www.philwood.com/products/hubspgs/colors/purp.jpg)
Okay, thanks. Just want to make sure it is more purple, instead of purple-pink :)
Ah, it is😶Yep almost like thisMy pleasure.Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?
YES! Thank you. So nice :) :eek: :D
The saturation seems a little heavy in those pictures. Would you say in a darker setting it might look more like this?
http://www.philwood.com/products/hubspgs/colors/purp.jpg (http://www.philwood.com/products/hubspgs/colors/purp.jpg)
Okay, thanks. Just want to make sure it is more purple, instead of purple-pink :)
Is it too late to join the GB?
August 17, 2017, DEADLINE FOR PAYMENTS (You guys can place orders or change your options until this day, but your new orders or your changes need to be paid before end of this day. ORDER HERE: https://goo.gl/Gz6AAt)The way I interpret this it's not too late to join.
August 18, 2017 - We will sort the orders again and work with the factory
Is it too late to join the GB?August 17, 2017, DEADLINE FOR PAYMENTS (You guys can place orders or change your options until this day, but your new orders or your changes need to be paid before end of this day. ORDER HERE: https://goo.gl/Gz6AAt)The way I interpret this it's not too late to join.
August 18, 2017 - We will sort the orders again and work with the factory
Is it too late to join the GB?August 17, 2017, DEADLINE FOR PAYMENTS (You guys can place orders or change your options until this day, but your new orders or your changes need to be paid before end of this day. ORDER HERE: https://goo.gl/Gz6AAt)The way I interpret this it's not too late to join.
August 18, 2017 - We will sort the orders again and work with the factory
Thanks. Where do I find shipping prices for a set to Denmark?
Is it too late to join the GB?August 17, 2017, DEADLINE FOR PAYMENTS (You guys can place orders or change your options until this day, but your new orders or your changes need to be paid before end of this day. ORDER HERE: https://goo.gl/Gz6AAt)The way I interpret this it's not too late to join.
August 18, 2017 - We will sort the orders again and work with the factory
Thanks. Where do I find shipping prices for a set to Denmark?
$66 if your order stays below 2kg (brass weight but no brass middle piece for example) $75 if it goes above that but under 2.5kg. Looking at the other two users from Denmark that are in the sheet already.
Is it too late to join the GB?August 17, 2017, DEADLINE FOR PAYMENTS (You guys can place orders or change your options until this day, but your new orders or your changes need to be paid before end of this day. ORDER HERE: https://goo.gl/Gz6AAt)The way I interpret this it's not too late to join.
August 18, 2017 - We will sort the orders again and work with the factory
I didn't.Is it too late to join the GB?August 17, 2017, DEADLINE FOR PAYMENTS (You guys can place orders or change your options until this day, but your new orders or your changes need to be paid before end of this day. ORDER HERE: https://goo.gl/Gz6AAt)The way I interpret this it's not too late to join.
August 18, 2017 - We will sort the orders again and work with the factory
Has anyone already got an invoice?
I didn't.Is it too late to join the GB?August 17, 2017, DEADLINE FOR PAYMENTS (You guys can place orders or change your options until this day, but your new orders or your changes need to be paid before end of this day. ORDER HERE: https://goo.gl/Gz6AAt)The way I interpret this it's not too late to join.
August 18, 2017 - We will sort the orders again and work with the factory
Has anyone already got an invoice?
What are we doing about the combined shipping now? I'd be interested.
Yep almost like thisMy pleasure.Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?
YES! Thank you. So nice :) :eek: :D
The saturation seems a little heavy in those pictures. Would you say in a darker setting it might look more like this?
http://www.philwood.com/products/hubspgs/colors/purp.jpg (http://www.philwood.com/products/hubspgs/colors/purp.jpg)
Yep almost like thisMy pleasure.Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?
YES! Thank you. So nice :) :eek: :D
The saturation seems a little heavy in those pictures. Would you say in a darker setting it might look more like this?
http://www.philwood.com/products/hubspgs/colors/purp.jpg (http://www.philwood.com/products/hubspgs/colors/purp.jpg)
So dark purple, right? If so, that's good news!
Someone finally got the invoice? The situation worries me, soon there will be a deadline, even on the revised dates
I am concerned about the lack of proper communication at such an early stage, even @exclusive - the manufacturer of these keyboards, is in the indeterminate stateSomeone finally got the invoice? The situation worries me, soon there will be a deadline, even on the revised dates
I believe he's waiting to get the E8-V1 orders further along to avoid drama. I'm not sure what you are worried about though. Worst case it's just a delay.
I am concerned about the lack of proper communication at such an early stage, even @exclusive - the manufacturer of these keyboards, is in the indeterminate stateSomeone finally got the invoice? The situation worries me, soon there will be a deadline, even on the revised dates
I believe he's waiting to get the E8-V1 orders further along to avoid drama. I'm not sure what you are worried about though. Worst case it's just a delay.
I still haven't gotten an invoice has everyone else gotten theirs?
For shipping price,
I had a mistake on calculating E8 shipping fee. (http://i.imgur.com/A5EJF9E.png)
I did not count extra fees...
I would have to pay for my mistake.
Shipping fees from Vietnam is really expensive.
For Europe people, the fee is higher than US and UK really much.
EVERYONE, most likely he is suspending the invoice date till the E8 is dealt with. Just ignore the projected timeline for the E6 and stop spamming the thread.In honest, I would like to know that E6 is delay because E8 group buy is not end. Everyone is looking forward E8 and consider to join E6 GB.
Sent from my iPhone using Tapatalk
For shipping price,
I had a mistake on calculating E8 shipping fee. (http://i.imgur.com/A5EJF9E.png)
I did not count extra fees...
I would have to pay for my mistake.
I PM'd you about grouping two orders together shipping to Canada. Hopefully you see that for invoicing :)
For shipping price,
I had a mistake on calculating E8 shipping fee. (http://i.imgur.com/A5EJF9E.png)
I did not count extra fees...
I would have to pay for my mistake.
I read your update in the E8 thread. If you haven't already, please update my shipping price to reflect the actual price. I don't want you paying for what I ordered.I PM'd you about grouping two orders together shipping to Canada. Hopefully you see that for invoicing :)
If this is about grouping orders, can I get in on this, too? :P
For shipping price,
I had a mistake on calculating E8 shipping fee. (http://i.imgur.com/A5EJF9E.png)
I did not count extra fees...
I would have to pay for my mistake.
I read your update in the E8 thread. If you haven't already, please update my shipping price to reflect the actual price. I don't want you paying for what I ordered.I PM'd you about grouping two orders together shipping to Canada. Hopefully you see that for invoicing :)
If this is about grouping orders, can I get in on this, too? :P
We live across the country from ya :( Doing same-city grouping here.
Would like to add to take your time with getting this sorted. I understand you have a lot happening with the e8. I would hate for you to run into a miscalculation down the line here, and get screwed for money again. I do not mind waiting another few weeks - this is just me, but maybe some share the same sentiment. I would be happy to see things wrap up with the e8 before diving into the e6 and taking payments. I just want things to run smoothly and without any hiccups for you and for us! Either way, looking forward to this kit.
For shipping price,
I had a mistake on calculating E8 shipping fee. (http://i.imgur.com/A5EJF9E.png)
I did not count extra fees...
I would have to pay for my mistake.
I read your update in the E8 thread. If you haven't already, please update my shipping price to reflect the actual price. I don't want you paying for what I ordered.I PM'd you about grouping two orders together shipping to Canada. Hopefully you see that for invoicing :)
If this is about grouping orders, can I get in on this, too? :P
We live across the country from ya :( Doing same-city grouping here.
Would like to add to take your time with getting this sorted. I understand you have a lot happening with the e8. I would hate for you to run into a miscalculation down the line here, and get screwed for money again. I do not mind waiting another few weeks - this is just me, but maybe some share the same sentiment. I would be happy to see things wrap up with the e8 before diving into the e6 and taking payments. I just want things to run smoothly and without any hiccups for you and for us! Either way, looking forward to this kit.
If I could upvote this I would
For shipping price,
I had a mistake on calculating E8 shipping fee. (http://i.imgur.com/A5EJF9E.png)
I did not count extra fees...
I would have to pay for my mistake.
I read your update in the E8 thread. If you haven't already, please update my shipping price to reflect the actual price. I don't want you paying for what I ordered.I PM'd you about grouping two orders together shipping to Canada. Hopefully you see that for invoicing :)
If this is about grouping orders, can I get in on this, too? :P
We live across the country from ya :( Doing same-city grouping here.
Would like to add to take your time with getting this sorted. I understand you have a lot happening with the e8. I would hate for you to run into a miscalculation down the line here, and get screwed for money again. I do not mind waiting another few weeks - this is just me, but maybe some share the same sentiment. I would be happy to see things wrap up with the e8 before diving into the e6 and taking payments. I just want things to run smoothly and without any hiccups for you and for us! Either way, looking forward to this kit.
I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?Show Image(https://geekhack.org/index.php?action=dlattach;topic=90787.0;attach=175491;image)
I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)
I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)
Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?Show Image(https://geekhack.org/index.php?action=dlattach;topic=90787.0;attach=175491;image)I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)
See above for the response in regards to purple.
I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?Show Image(https://geekhack.org/index.php?action=dlattach;topic=90787.0;attach=175491;image)I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)
See above for the response in regards to purple.
Actually, E6 material is different a little bit to E8. Surface treatment is different also.
But basically, the purple color will be like that. Not the same 100%.
I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?Show Image(https://geekhack.org/index.php?action=dlattach;topic=90787.0;attach=175491;image)I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)
See above for the response in regards to purple.
Actually, E6 material is different a little bit to E8. Surface treatment is different also.
But basically, the purple color will be like that. Not the same 100%.
Real quick, what finish will the steel plates have and will the screws for the name plate be visible?
I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?Show Image(https://geekhack.org/index.php?action=dlattach;topic=90787.0;attach=175491;image)I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)
See above for the response in regards to purple.
Actually, E6 material is different a little bit to E8. Surface treatment is different also.
But basically, the purple color will be like that. Not the same 100%.
So no dark purple? Only E8 pink-purple?
I'm so confused now. :(
I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)Can we get a sample of the purple?I said i will post it
Also sent a message since I had a second order I didn't see on here, unfortunately. :( - Can you please fix it, Jhoang?
u want the purple lile this ?Show Image(https://geekhack.org/index.php?action=dlattach;topic=90787.0;attach=175491;image)I have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)
See above for the response in regards to purple.
Actually, E6 material is different a little bit to E8. Surface treatment is different also.
But basically, the purple color will be like that. Not the same 100%.
So no dark purple? Only E8 pink-purple?
I'm so confused now. :(
Is the brass going to be finished/coated similarly to the m65-a?It can be like that or coated
Sent from my iPhone using Tapatalk
Is the brass going to be finished/coated similarly to the m65-a?It can be like that or coated
Sent from my iPhone using Tapatalk
Pvd?i think is hard work .but i have another way deal it .it will updata when producingIs the brass going to be finished/coated similarly to the m65-a?It can be like that or coated
Sent from my iPhone using Tapatalk
Can you do PVD coating to all the brass? (Middle brass and the weight)
I would prefer coating too. No way I disassemble and polish brass parts every other month.Is fine i will deal it.
Gesendet von iPhone mit Tapatalk
Submitted an order. When can I expect an invoiceIs soon if not get invoice
Paid and can't wait! Kinda wishing I had purple too... but red just looks too good.You can order a red ^-^
The brass can do like this maskant
Textured and u dont need worry about tarnishing. u can touch it like anoding caseThe brass can do like this maskant
What type of finish is that? Is it smooth or textured to the touch? Is it sealed like PVD to prevent tarnishing? That's the main reason people want PVD, because you don't have to worry about tarnishing.
Also the purple color .the pic take by my friendI have sent out all the invoices.
Please check it and let me know if there is any problems.
Thanks!
Thanks for the updates jhoang. Greatly appreciated.
So are the E6 colors the same as E8 colors? I'm interested in the purple color:Show Image(http://i.imgur.com/70oiJZ8.jpg)
The brass can do like this maskant
Pvd i have check it.The brass can do like this maskant
The Purple sample is perfect, that dark purple is beautiful!! Amazing job, Exclusive! :thumb: I think all the Purple choosers made the right choice!
But no textured brass please. Smooth aluminum + textured brass is messy.
I'm not sure how difficult PVD coating would be, but I think that would be preferred. Maybe two options, one for those who want PVD coated brass, and an option for those who want raw brass?
I'm not to familiar with other possible long lasting coatings, but in the end I personally wouldn't want textures brass like the sample you showed. :(
Edit: Are there any other long lasting options to prevent brass from tarnishing?
Get the sample like this ??The brass can do like this maskant
The Purple sample is perfect, that dark purple is beautiful!! Amazing job, Exclusive! :thumb: I think all the Purple choosers made the right choice!
But no textured brass please. Smooth aluminum + textured brass is messy.
I'm not sure how difficult PVD coating would be, but I think that would be preferred. Maybe two options, one for those who want PVD coated brass, and an option for those who want raw brass?
I'm not to familiar with other possible long lasting coatings, but in the end I personally wouldn't want textures brass like the sample you showed. :(
Edit: Are there any other long lasting options to prevent brass from tarnishing?
Count me in for this beaut! This is a great looking board, I think you guys did an amazing job on this. Thanks for making it happen.
very smexy
Sent from my SM-G900V using Tapatalk
Get the sample like this ??The brass can do like this maskant
The Purple sample is perfect, that dark purple is beautiful!! Amazing job, Exclusive! :thumb: I think all the Purple choosers made the right choice!
But no textured brass please. Smooth aluminum + textured brass is messy.
I'm not sure how difficult PVD coating would be, but I think that would be preferred. Maybe two options, one for those who want PVD coated brass, and an option for those who want raw brass?
I'm not to familiar with other possible long lasting coatings, but in the end I personally wouldn't want textures brass like the sample you showed. :(
Edit: Are there any other long lasting options to prevent brass from tarnishing?
Yep it is pvd, i have find it for a whole morning.Get the sample like this ??The brass can do like this maskant
The Purple sample is perfect, that dark purple is beautiful!! Amazing job, Exclusive! :thumb: I think all the Purple choosers made the right choice!
But no textured brass please. Smooth aluminum + textured brass is messy.
I'm not sure how difficult PVD coating would be, but I think that would be preferred. Maybe two options, one for those who want PVD coated brass, and an option for those who want raw brass?
I'm not to familiar with other possible long lasting coatings, but in the end I personally wouldn't want textures brass like the sample you showed. :(
Edit: Are there any other long lasting options to prevent brass from tarnishing?
Yes! Just like that! Is that with PVD Coating? It looks beautiful! The great part is, it won't tarnish and will stay shiny forever! :thumb:
Yep it is pvd, i have find it for a whole morning.Get the sample like this ??The brass can do like this maskant
The Purple sample is perfect, that dark purple is beautiful!! Amazing job, Exclusive! :thumb: I think all the Purple choosers made the right choice!
But no textured brass please. Smooth aluminum + textured brass is messy.
I'm not sure how difficult PVD coating would be, but I think that would be preferred. Maybe two options, one for those who want PVD coated brass, and an option for those who want raw brass?
I'm not to familiar with other possible long lasting coatings, but in the end I personally wouldn't want textures brass like the sample you showed. :(
Edit: Are there any other long lasting options to prevent brass from tarnishing?
Yes! Just like that! Is that with PVD Coating? It looks beautiful! The great part is, it won't tarnish and will stay shiny forever! :thumb:
i may give u guys two options for brass
coating or pvd
Thx is my responsibility .Yep it is pvd, i have find it for a whole morning.Get the sample like this ??The brass can do like this maskant
The Purple sample is perfect, that dark purple is beautiful!! Amazing job, Exclusive! :thumb: I think all the Purple choosers made the right choice!
But no textured brass please. Smooth aluminum + textured brass is messy.
I'm not sure how difficult PVD coating would be, but I think that would be preferred. Maybe two options, one for those who want PVD coated brass, and an option for those who want raw brass?
I'm not to familiar with other possible long lasting coatings, but in the end I personally wouldn't want textures brass like the sample you showed. :(
Edit: Are there any other long lasting options to prevent brass from tarnishing?
Yes! Just like that! Is that with PVD Coating? It looks beautiful! The great part is, it won't tarnish and will stay shiny forever! :thumb:
i may give u guys two options for brass
coating or pvd
You are AMAZING! Thank you so much, Exclusive!!! :)
I'll personally be going for that beautiful PVD! I'm so excited!
Awaiting for a pm response regarding adding an additional middle case and my founders edition. Still waiting for responseYou should ask jhoang .
Awaiting for a pm response regarding adding an additional middle case and my founders edition. Still waiting for responseYou should ask jhoang .
sry cant help
Awaiting for a pm response regarding adding an additional middle case and my founders edition. Still waiting for responseYou should ask jhoang .
sry cant help
He will respond. He was really god answering my questions. Just give him some time.
The pm went to jioang already. Just awaiting for his response.
:thumb:Awaiting for a pm response regarding adding an additional middle case and my founders edition. Still waiting for responseYou should ask jhoang .
sry cant help
He will respond. He was really god answering my questions. Just give him some time.
The pm went to jioang already. Just awaiting for his response.
anyone want to swap numbers with me, looking for #8 or #24; have #21
Only really wanted those two numbers, maybe can set up 3 way with someone with 8 or 24anyone want to swap numbers with me, looking for #8 or #24; have #21
I would love to take #21 but I don't have #8 or #24... Would you still be interested in swapping? Mine's #16
For it to have the underglow led do I need to buy the pcb option that I get or any pcb?From the specs, both the custom PCB and standard PCB options have RGB underglow. If you buy a 3rd party PCB, you'll need to make sure it has RGB underglow.
anyone want to swap numbers with me, looking for #8 or #24; have #21
Exclusive, Jhoang, anyone!Im almost certain the deadline will be extended quite a bit.
I submitted an order change via PM, but Jhoang hasn't been around lately to adjust my order and send a new invoice.
Can the payment deadline be extended? :(
Exclusive, Jhoang, anyone!Im almost certain the deadline will be extended quite a bit.
I submitted an order change via PM, but Jhoang hasn't been around lately to adjust my order and send a new invoice.
Can the payment deadline be extended? :(
Sent from my iPhone using Tapatalk
No worry i have pm to uExclusive, Jhoang, anyone!Im almost certain the deadline will be extended quite a bit.
I submitted an order change via PM, but Jhoang hasn't been around lately to adjust my order and send a new invoice.
Can the payment deadline be extended? :(
Sent from my iPhone using Tapatalk
I hope so. This is a buy I don't wanna miss! :)
Excluisve, I really appreciate you being so active in this thread. Keep up the good work! :thumb:Thanks man
Excluisve, I really appreciate you being so active in this thread. Keep up the good work! :thumb:Thanks man
I will
awesome! that switch would be perfect. I think maybe we should hold off on switching until Jhoang clears some things up with e8, since I probably wont join this if the end isn't in sight for e8.anyone want to swap numbers with me, looking for #8 or #24; have #21
I'm more of a Shaq guy myself, but I feel that #24 would be better with you than with me. I would be ok with the number swap. Just send a message to Jhoang and we should be able to get it done. Also invoice just paid fyi.
anyone want to swap numbers with me, looking for #8 or #24; have #21
I'm more of a Shaq guy myself, but I feel that #24 would be better with you than with me. I would be ok with the number swap. Just send a message to Jhoang and we should be able to get it done. Also invoice just paid fyi.
I think kobe may prefer to 8&24 🤔anyone want to swap numbers with me, looking for #8 or #24; have #21
I'm more of a Shaq guy myself, but I feel that #24 would be better with you than with me. I would be ok with the number swap. Just send a message to Jhoang and we should be able to get it done. Also invoice just paid fyi.
Would you be interested in swapping your new number#21 with my #16?
If u guys have any question
plz contact me
www.531229973@qq.com
Or
exclusive19933@gmail.com
i prefer to the first email .
Gmail not available in my country need vpn
SryIf u guys have any question
plz contact me
www.531229973@qq.com
Or
exclusive19933@gmail.com
i prefer to the first email .
Gmail not available in my country need vpn
Are you able to change orders? I messaged jhoang a few times but heard nothing back. Is it too late to add another case lol
If u guys have any question
plz contact me
www.531229973@qq.com
Or
exclusive19933@gmail.com
i prefer to the first email .
Gmail not available in my country need vpn
Hey exclusive, any word from Jhoang at all? Has the order for production been placed?He was not reply me a week ago
Hey exclusive, any word from Jhoang at all? Has the order for production been placed?He was not reply me a week ago
i dont get any word .
I hope soHey exclusive, any word from Jhoang at all? Has the order for production been placed?He was not reply me a week ago
i dont get any word .
Dang :( hope all is ok on his end. You reply so fast! It is truly great. Thanks :)
What's happening with the order right now?
Oh boy... where to start. I do have some updates and information from both Jhoang and Exclusive, though I'm a bit unsure if proper to broadcast. However, I feel like we are all in this together, so I think it's best to share. There is no doubt that it's is a complicated situation at this point and I'm still sorting out what I think of it all. I'll try to lay out what I know and we can discuss. My utmost hope is that Jhoang joins us in the discussion because as I've encouraged him directly, short of him being involved with us in public on GH, all we can do is speculate and wonder and trade shards of information.Jhoang save this group buy! Tell us anything! Even if it's really bad news. We can take any type of update, what we can't take is silence. It takes 2 min to share with us via your phone. Do the needful.
I exchanged some messages with Jhoang yesterday on Facebook. I've tried via Geekhack and email a few times with no success, so decided to try Facebook. I did have a nice series of responses from him there. I learned that E8-V1 should start shipping next week as he has plates and badges back from Exclusive. That's excellent news- I can't wait to see that board! Just a note here- when I have had responses from Jhoang, they have been pleasant and in my opinion, he means well. I do not believe Jhoang is scamming us. That is just my personal feeling (maybe mixed in with my pathological optimism and trust for other humans), but I think he wants to make keyboards, not run off with our money.
The less good news is that his PayPal is very frozen, as you might expect with the amount of contested charges on the E8-V1. (FWIW, I don't fault anyone for contesting that either- we have been left in the dark with no or wrong information again and again.) Due to that, Exclusive has yet to be paid for the E6-V2 project. Here, I am really confused. Exclusive has shared that he's making the E6 for Chinese GB anyway, so he can make the E6 for us too. I have paid for my E6-V2 and to be honest, I don't want or care about any drama or who does what, I just want the frigging board- it's stunning. So, I am considering contesting that payment and re-paying Exclusive directly for the board. However, Jhoang has said that he is the designer of the boards and Exclusive is the manufacturer. I hesitate to share this, because it's all really unclear to me. I've asked some additional questions around this... In some ways, it would make sense to reorganize the buy with Exclusive based on the communication history of Jhoang vs. Exclusive. But if Jhoang is the designer, then we need him, I think??
I for one am still very willing to trust Jhoang on both buys. Call me crazy, but I am. He has not run the buys well, again, just my opinion, but when you look at Revo, Kin, Yuktsi, LZ, Duck (via Elton)- other boards at similar price points, I also expect some professionalism from the runners (though no one is immune to GB bumps). It would be hard to argue that we have seen a steady hand in leading the buy to date from Jhoang, but heck, I want to see him get there and do better and I'm willing to leave my money in his hands as a sign of faith I trust him to improve those aspects of keyboard making/ selling. Everyone should make their own call regarding that decision and my personal caveat there is that I need to hear from Jhoang in public channels to hold on to any of my faith and keep my money. Without his re-reappearance, I'm afraid I'm out too and will either look to work with Exclusive directly or move on to the next board.
Sorry if I've shared too much opinion or rambled, but I hope it helps everyone understand where I believe these buys are currently at.
Your turn, Jhoang. :)
I agree, though I believe in the success of this gb, I think that there are people who may be scared and start to exit.Oh boy... where to start. I do have some updates and information from both Jhoang and Exclusive, though I'm a bit unsure if proper to broadcast. However, I feel like we are all in this together, so I think it's best to share. There is no doubt that it's is a complicated situation at this point and I'm still sorting out what I think of it all. I'll try to lay out what I know and we can discuss. My utmost hope is that Jhoang joins us in the discussion because as I've encouraged him directly, short of him being involved with us in public on GH, all we can do is speculate and wonder and trade shards of information.Jhoang save this group buy! Tell us anything! Even if it's really bad news. We can take any type of update, what we can't take is silence. It takes 2 min to share with us via your phone. Do the needful.
I exchanged some messages with Jhoang yesterday on Facebook. I've tried via Geekhack and email a few times with no success, so decided to try Facebook. I did have a nice series of responses from him there. I learned that E8-V1 should start shipping next week as he has plates and badges back from Exclusive. That's excellent news- I can't wait to see that board! Just a note here- when I have had responses from Jhoang, they have been pleasant and in my opinion, he means well. I do not believe Jhoang is scamming us. That is just my personal feeling (maybe mixed in with my pathological optimism and trust for other humans), but I think he wants to make keyboards, not run off with our money.
The less good news is that his PayPal is very frozen, as you might expect with the amount of contested charges on the E8-V1. (FWIW, I don't fault anyone for contesting that either- we have been left in the dark with no or wrong information again and again.) Due to that, Exclusive has yet to be paid for the E6-V2 project. Here, I am really confused. Exclusive has shared that he's making the E6 for Chinese GB anyway, so he can make the E6 for us too. I have paid for my E6-V2 and to be honest, I don't want or care about any drama or who does what, I just want the frigging board- it's stunning. So, I am considering contesting that payment and re-paying Exclusive directly for the board. However, Jhoang has said that he is the designer of the boards and Exclusive is the manufacturer. I hesitate to share this, because it's all really unclear to me. I've asked some additional questions around this... In some ways, it would make sense to reorganize the buy with Exclusive based on the communication history of Jhoang vs. Exclusive. But if Jhoang is the designer, then we need him, I think??
I for one am still very willing to trust Jhoang on both buys. Call me crazy, but I am. He has not run the buys well, again, just my opinion, but when you look at Revo, Kin, Yuktsi, LZ, Duck (via Elton)- other boards at similar price points, I also expect some professionalism from the runners (though no one is immune to GB bumps). It would be hard to argue that we have seen a steady hand in leading the buy to date from Jhoang, but heck, I want to see him get there and do better and I'm willing to leave my money in his hands as a sign of faith I trust him to improve those aspects of keyboard making/ selling. Everyone should make their own call regarding that decision and my personal caveat there is that I need to hear from Jhoang in public channels to hold on to any of my faith and keep my money. Without his re-reappearance, I'm afraid I'm out too and will either look to work with Exclusive directly or move on to the next board.
Sorry if I've shared too much opinion or rambled, but I hope it helps everyone understand where I believe these buys are currently at.
Your turn, Jhoang. :)
Sent from my iPhone using Tapatalk
Tell us anything! Even if it's really bad news. We can take any type of update, what we can't take is silence. It takes 2 min to share with us via your phone.
Are we going to be getting our keyboards? If not I'm just going to dip out of the group buy. I can't wait any longer without a response from johang.
We shouldn't really have to resort to contacting him on Facebook though. It has been nearly a month since Jhoang has even logged on here, which as someone leading group buys worth tens of thousands of dollars he really shouldn't be doing that.
I'm not that nervous really since we still have a large window for Paypal protection, but if this ends up like the E8 buy is right now I'll be ready to file a dispute.
If another 60% group buy happens to come a long in the next 2 weeks and johang hasn't come thru I'll just dip out.
How do we dip out? I guess only way is through paypal's "Report a problem"? And that could take months.If another 60% group buy happens to come a long in the next 2 weeks and johang hasn't come thru I'll just dip out.
Hello guys
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .
Hello guysIf we already paid jhoang what should we do? I still want this keyboard, but don't really want to pay for it twice.
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .
QuoteHello guysIf we already paid jhoang what should we do? I still want this keyboard, but don't really want to pay for it twice.
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .
QuoteHello guysIf we already paid jhoang what should we do? I still want this keyboard, but don't really want to pay for it twice.
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .
QuoteHello guysIf we already paid jhoang what should we do? I still want this keyboard, but don't really want to pay for it twice.
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .
Yeah I actually can't afford to pay for this again, so what should I do since this isn't really an option for me.
QuoteHello guysIf we already paid jhoang what should we do? I still want this keyboard, but don't really want to pay for it twice.
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .QuoteHello guysIf we already paid jhoang what should we do? I still want this keyboard, but don't really want to pay for it twice.
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .
Yeah I actually can't afford to pay for this again, so what should I do since this isn't really an option for me.
He can confirm this, but I believe Exclusive is planning to continue the group buy with all of the same options (other than QMK, left port USB and -$30). Sounds like he wants to finish up production on the Chinese group buy and wants to make some boards for the GH GB as well.
Since it sounds like Jhoang isn't responding to Exclusive either and apparently hasn't passed along any E6 money, we are all in a pickle.
In my opinion, everyone will now have to decide whether to contest the original E6-V2 PayPal charge with Jhoang and pay Exclusive directly for the board or not. I'm not sure what will happen if we hang in there with Jhoang- he's not telling us anything on E8 or E6. Presumably, Exclusive could run another batch when Jhoang delivers the money... maybe? However, I personally believe in Exclusive directly far more than I can believe in Jhoang at the moment. And like so many here, I just love this board- fell in love with the look and the options and now - brass plate... Dang.
For what it's worth- I am still pulling for Jhoang. I believe he has had some tough things going on in life and I hope nothing but the best for him. I really hope to see the E8s ship soon and I would likely still back him in another buy downstream. I know- I'm a softie, but I would, I've needed many second chances in life and I still don't think Jhoang was purely just out to rip us off here...
QuoteHello guysIf we already paid jhoang what should we do? I still want this keyboard, but don't really want to pay for it twice.
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .QuoteHello guysIf we already paid jhoang what should we do? I still want this keyboard, but don't really want to pay for it twice.
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .
Yeah I actually can't afford to pay for this again, so what should I do since this isn't really an option for me.
He can confirm this, but I believe Exclusive is planning to continue the group buy with all of the same options (other than QMK, left port USB and -$30). Sounds like he wants to finish up production on the Chinese group buy and wants to make some boards for the GH GB as well.
Since it sounds like Jhoang isn't responding to Exclusive either and apparently hasn't passed along any E6 money, we are all in a pickle.
In my opinion, everyone will now have to decide whether to contest the original E6-V2 PayPal charge with Jhoang and pay Exclusive directly for the board or not. I'm not sure what will happen if we hang in there with Jhoang- he's not telling us anything on E8 or E6. Presumably, Exclusive could run another batch when Jhoang delivers the money... maybe? However, I personally believe in Exclusive directly far more than I can believe in Jhoang at the moment. And like so many here, I just love this board- fell in love with the look and the options and now - brass plate... Dang.
For what it's worth- I am still pulling for Jhoang. I believe he has had some tough things going on in life and I hope nothing but the best for him. I really hope to see the E8s ship soon and I would likely still back him in another buy downstream. I know- I'm a softie, but I would, I've needed many second chances in life and I still don't think Jhoang was purely just out to rip us off here...
With you on that, although things are looking pretty grim, I don't see any logic in him retaining that many keyboards. Also, speaking with him on several occasions, he is a really cool guy. I'm just hoping that what he's doing is somewhere along the lines of keeping his head down and getting everything sorted out. I just wish he would respond to me on fb haha.
Sigh, if this doesnt work out though, I'm actually out a lot of money. GG
Hello guysThanks Exclusive for keeping the GB alive! I've filled out the form, let me know if you have any questions about what I submitted!
As we know e6 was handled
I don't want this gb cancel so I decided to start manufacture e6 next few days
Btw I don't get money from jhoang thus I hope u guys can join me .
The edition will be reserved but qmk pcb and left port case was removed sry for that.
The brass plate will be available also I will
reduce 30$ each order for thanks ppl who trust me from now and on
I just want the gb smooth and successful
Fill the table if u want join me
https://docs.google.com/forms/d/1__iRjPe3-TtdLdgPeo5OUUhc8ZPMsXIDKLxfiejp8iU/edit
Thanks .
How long do PayPal disputes take usually? Assuming he won't respond to those very fast either, it could take weeks?Fill the form plz I will wait u guys for a week
I'm not putting up the money twice, will it be possible to reserve our spots in this and pay when we have our money back?
Am I right in assuming that even if jhoang returns his buy will be dead? If so that's rather sad as I am not even slightly interested in this if there's no option for the QMK PCB.I am sorry for that
hi exclusive. if you don't mind me asking, did a rift between you and jhoang occur during the process of running the E8-V1 buy? it seems very odd that communication between two group buy runners would break down in this manner
I will be disputing my charge for this board now. Jhoang has clearly abandoned this. I trust exclusive more since he is the one actually here answering questions, but unfortunately without QMK and left side USB I'm out on this one. Good luck every one.Thanks my friend
Great to hear something is happening on this GB, however I don't have the money to float on both the Jhoang invoice and then another one, and given the time he has to do something once you file a dispute i have no chance of getting the money back in time, so sadly I can't join along.I am sry to let u guys make a decision
Great to hear something is happening on this GB, however I don't have the money to float on both the Jhoang invoice and then another one, and given the time he has to do something once you file a dispute i have no chance of getting the money back in time, so sadly I can't join along.I am sry to let u guys make a decision
But we need move on .
Anyway I have receive many pms for asking qmk .
Fine qmk reserved also left port
It means will spent more time
Many option if u guys agree
All things reserved
Good day .
从我的 iPhone 发送,使用 Tapatalk
Great to hear something is happening on this GB, however I don't have the money to float on both the Jhoang invoice and then another one, and given the time he has to do something once you file a dispute i have no chance of getting the money back in time, so sadly I can't join along.I am sry to let u guys make a decision
But we need move on .
For what it's worth, I have one experience with PayPal dispute and it was very efficient.
-You open dispute which includes a message to the seller.
-After some time (I waited a week), you go view dispute and escalate to PayPal claim.
-After I clicked that, I had money back in account in 5 minutes.
Great to hear something is happening on this GB, however I don't have the money to float on both the Jhoang invoice and then another one, and given the time he has to do something once you file a dispute i have no chance of getting the money back in time, so sadly I can't join along.I am sry to let u guys make a decision
But we need move on .
For what it's worth, I have one experience with PayPal dispute and it was very efficient.
-You open dispute which includes a message to the seller.
-After some time (I waited a week), you go view dispute and escalate to PayPal claim.
-After I clicked that, I had money back in account in 5 minutes.
Is there a qmk middle port version? Or just bootmapper middle portIt all reserved.
Sent from my iPhone using Tapatalk
Anyway I have receive many pms for asking qmk .
Fine qmk reserved also left port
It means will spent more time
Many option if u guys agree
All things reserved
Good day .
从我的 iPhone 发送,使用 Tapatalk
Why do people like left port more than center or right?
Why do people like left port more than center or right?
[/quote
The $120 pcb i bought is left port. So i wait for a left port keyboard
Why do people like left port more than center or right?
Left is GH60 compatible, so you can get another PCB if you need.
When would the payment deadline be?
When would the payment deadline be?
9/23
SureWhen would the payment deadline be?
9/23
Will you post a table with the updated orders so we can ensure everything is correct?
Wow I hadn't been on GH the past few weeks, and it's pretty disappointing to see how this has been going. That being said, if there's still a chance that I can get what I want from Exclusive, I may do that. Just a lot of money to have out all at once. I guess it's time for a Paypal dispute....Yep it still have a chance
Filled out the form, let's hope I can get the money back in time :thumb: .I have post it before
Do you know how expensive shipping will be?
Do you have an estimate for when they will ship?
Alright, that's not bad. Thanks!Pleasure
When would the payment deadline be?
9/23
When can we expect an invoice? I just emailed Jhoang and requested a refund. I hope he does respond but if he does not I will have to dispute the charge.
Just got a respond from Paypal and I got the refund from them.yep .is possible
So left USB and QMK support is now possible?
Just got a respond from Paypal and I got the refund from them.yep .is possible
So left USB and QMK support is now possible?
Just got a respond from Paypal and I got the refund from them.yep .is possible
So left USB and QMK support is now possible?
Hey Exclusive, one question.. What kind of QC will you be performing on the keyboards - will it be yourself after they come from factory? And will you be doing the packing?No worry
After the issue with the e8 nameplates, I just want to be assured that the packing will be done in a way that stuff should not get damaged in transit! Packaging of the 2nd shipment of e8 nameplates looked really good, just want to make sure that QC/packing will be good here!
Thanks :)
When can we expect an invoice? I just emailed Jhoang and requested a refund. I hope he does respond but if he does not I will have to dispute the charge.After .9/23
Hey Exclusive, one question.. What kind of QC will you be performing on the keyboards - will it be yourself after they come from factory? And will you be doing the packing?I am thinking buy the nelon box almost like that
After the issue with the e8 nameplates, I just want to be assured that the packing will be done in a way that stuff should not get damaged in transit! Packaging of the 2nd shipment of e8 nameplates looked really good, just want to make sure that QC/packing will be good here!
Thanks :)
All invoice sent
I have arrangement the material
Checked it at once u have any question
Pm me .
Btw i will need at least 30 orders
When hit the quantity ,it will be close .
Thanks
Filled out the form. Thank you so much for your dedication exclusive :thumb:Thanks
Will another spreadsheet be posted after the invoices are complete?Yep it will
Got the money back from the original Invoice and paid the new :)
Got the money back from the original Invoice and paid the new :)
How long did you have to wait after you maid the claim?
Got the money back from the original Invoice and paid the new :)
How long did you have to wait after you maid the claim?
once i escalated and filled in information i got it straight away. Just make sure you have given iinformation everytime they ask for some.
Got the money back from the original Invoice and paid the new :)
How long did you have to wait after you maid the claim?
once i escalated and filled in information i got it straight away. Just make sure you have given iinformation everytime they ask for some.
Weird, I escalated and then filled out the reason (item not received) and now it is waiting on a response from him.
I took the same path, but I'm still waiting on my money back as it's being checked by PayPal right now.Got the money back from the original Invoice and paid the new :)
How long did you have to wait after you maid the claim?
once i escalated and filled in information i got it straight away. Just make sure you have given iinformation everytime they ask for some.
Weird, I escalated and then filled out the reason (item not received) and now it is waiting on a response from him.
Wierd indeed, i had a very clear action i could take on the page which then led to a further question and then my money were returned.
Last two days ./
I'm still waiting on my paypal refund from the jhoang incident. I literally cannot afford to buy this twice. Is there anyway to get in once I do get a refund or am I screwed, Exclusive?No worry dude filled the form
I'm still waiting on my paypal refund from the jhoang incident. I literally cannot afford to buy this twice. Is there anyway to get in once I do get a refund or am I screwed, Exclusive?I don't want u guys suffer in this
I'm still waiting on my paypal refund from the jhoang incident. I literally cannot afford to buy this twice. Is there anyway to get in once I do get a refund or am I screwed, Exclusive?I don't want u guys suffer in this
U can filled the form first
I will take u order pay me later is ok
But I am ready to production
Is the same to other ppl who wants the board
Thanks .
Okay.get yaI'm still waiting on my paypal refund from the jhoang incident. I literally cannot afford to buy this twice. Is there anyway to get in once I do get a refund or am I screwed, Exclusive?I don't want u guys suffer in this
U can filled the form first
I will take u order pay me later is ok
But I am ready to production
Is the same to other ppl who wants the board
Thanks .
Thank you so much! Just filled out the form. Will pay as soon as I get previous refund. Also, in the form, you might want to change the address line to paragraph answer, not short answer. That way addresses and phone numbers can be formatted correctly instead of all on one line. :)
Thanks,i have modify it .I'm still waiting on my paypal refund from the jhoang incident. I literally cannot afford to buy this twice. Is there anyway to get in once I do get a refund or am I screwed, Exclusive?I don't want u guys suffer in this
U can filled the form first
I will take u order pay me later is ok
But I am ready to production
Is the same to other ppl who wants the board
Thanks .
Thank you so much! Just filled out the form. Will pay as soon as I get previous refund. Also, in the form, you might want to change the address line to paragraph answer, not short answer. That way addresses and phone numbers can be formatted correctly instead of all on one line. :)
Hello Exclusive,HI manofinterests
I didn't join the group buy since I was a bit worried about the status on the e8 (I still am worried :( ).
I was wondering if I could still join the E6-V2 now that I know that you are running it
Okay.get yaI'm still waiting on my paypal refund from the jhoang incident. I literally cannot afford to buy this twice. Is there anyway to get in once I do get a refund or am I screwed, Exclusive?I don't want u guys suffer in this
U can filled the form first
I will take u order pay me later is ok
But I am ready to production
Is the same to other ppl who wants the board
Thanks .
Thank you so much! Just filled out the form. Will pay as soon as I get previous refund. Also, in the form, you might want to change the address line to paragraph answer, not short answer. That way addresses and phone numbers can be formatted correctly instead of all on one line. :)
Re filled it thanks .Okay.get yaI'm still waiting on my paypal refund from the jhoang incident. I literally cannot afford to buy this twice. Is there anyway to get in once I do get a refund or am I screwed, Exclusive?I don't want u guys suffer in this
U can filled the form first
I will take u order pay me later is ok
But I am ready to production
Is the same to other ppl who wants the board
Thanks .
Thank you so much! Just filled out the form. Will pay as soon as I get previous refund. Also, in the form, you might want to change the address line to paragraph answer, not short answer. That way addresses and phone numbers can be formatted correctly instead of all on one line. :)
Thanks! Should I fill it out again or just keep the first one?
Re filled it thanks .Okay.get yaI'm still waiting on my paypal refund from the jhoang incident. I literally cannot afford to buy this twice. Is there anyway to get in once I do get a refund or am I screwed, Exclusive?I don't want u guys suffer in this
U can filled the form first
I will take u order pay me later is ok
But I am ready to production
Is the same to other ppl who wants the board
Thanks .
Thank you so much! Just filled out the form. Will pay as soon as I get previous refund. Also, in the form, you might want to change the address line to paragraph answer, not short answer. That way addresses and phone numbers can be formatted correctly instead of all on one line. :)
Thanks! Should I fill it out again or just keep the first one?
@Exclusive: Where is your form?In pages eight
@Exclusive: Where is your form?In pages eight
u can choose ur option.@Exclusive: Where is your form?In pages eight
I am new, have not joined before :(
Is there a qmk middle port version? Or just bootmapper middle portit have qmk middle port version
Sent from my iPhone using Tapatalk
Hi exclusive.i have checked it
I filled out the form. I am Invoice ID E6-41 and order #46. I would like to order through you, but the form was confusing. Did I do it correctly?
i have not join beforeHi I have sent u the message plz check it thanks
i dont know my option or how i want to change it
i fill the form
can u cross that out and how can i choose my option?
Just paid!I will sent to u guys one buy one
When you have it can you share order spreadsheet so we can check to make sure it is all good? Thank you! Cannot wait :) I have all my other parts ready.
Unsure about getting back in this /:I know u Kafka
Sent from my iPhone using Tapatalk
Unsure about getting back in this /:
Sent from my iPhone using Tapatalk
Unsure about getting back in this /:
Sent from my iPhone using Tapatalk
DO IT
Perhaps,Unsure about getting back in this /:
Sent from my iPhone using Tapatalk
DO IT
+1!
I feel like Exclusive wants to make this board for us and is going to deliver some beauties!!Show Image(https://i.imgur.com/FZO9LuO.png)
DO IT
+1!
I feel like Exclusive wants to make this board for us and is going to deliver some beauties!!Show Image(https://i.imgur.com/FZO9LuO.png)
Okay I'm in :D
DO ITReally appreciate it .+1!
I feel like Exclusive wants to make this board for us and is going to deliver some beauties!!Show Image(https://i.imgur.com/FZO9LuO.png)
Okay I'm in :D
(https://www.staples-3p.com/s7/is/image/Staples/s0105150_sc7?$splssku$)DO IT+1!
I feel like Exclusive wants to make this board for us and is going to deliver some beauties!!Show Image(https://i.imgur.com/FZO9LuO.png)
Okay I'm in :D
Hype. One more day to pay folks!
Still waiting on my original refund, hope it comes through soon :|
Can anyone explain the Pros/Cons between Bootmapper and QMK? I really don't using either but bootmapper has a nice UI. If anyone could shed some light on this matter that would be greatly appreciated.
Sent from my SM-G935F using Tapatalk
I think I know what you mean by more powerful.. I just don't think I needed all those power might get myself burn or worse bricking the PCB... Thanks for the explanation I will stay with nice and easyCan anyone explain the Pros/Cons between Bootmapper and QMK? I really don't using either but bootmapper has a nice UI. If anyone could shed some light on this matter that would be greatly appreciated.
Sent from my SM-G935F using Tapatalk
From my experience. Bootmapper is nice and easy. QMK is a little more complex to program but is more powerful. If you don't know what the 'more powerful' entails, you probably don't need it. I got QMK on my last board, wish I got bootmapper.. now that I know how to program QMK, doesn't really matter but it was frustrating and I could have done all the same things in bootmapper. That being said, endgame keyboard, get endgame pcb. There may be a time when you realize the limitations and wish you had gone QMK. I am not at that stage yet.
Worth nothing is the fact that the bootmapper client PCB uses the 32a controller, which lacks native USB support.Ohhh going to do some research on this for keyboard science. Thanks for pointing it out!
This results in slightly longer response times than you would get on a PCB using a controller like the 32u4, which QMK runs on.
For this reason alone I'd never pick the bootmapper version of the PCB, no matter if I would actually notice the delay or not.
Worth nothing is the fact that the bootmapper client PCB uses the 32a controller, which lacks native USB support.
This results in slightly longer response times than you would get on a PCB using a controller like the 32u4, which QMK runs on.
For this reason alone I'd never pick the bootmapper version of the PCB, no matter if I would actually notice the delay or not.
Edit:
Also worth noting is that while the 32a does lack native USB support, I'm not sure how valid my claims above about response times actually are. This is something I've heard from other people, but when I tried researching it now I came up blank!
So if anyone else can share anything on this I'd very much appreciate it :)
From my understanding there's two things at play:
1) The V-USB that the 32a controller runs does introduce some theoretical lag relative to the native USB controller on the 32u4. It's probably on the order of sub-1ms. Reason being is that instead of there being an actual USB controller, the 32a is faking it by bitbanging two GPIO pins. Upside is this method allows for support of PS/2 as well - that's why you see BootMapper Client PCBs support PS/2 while TMK/QMK generally does not.
2) There appears to be much longer periods of lag when using a 32a controller on a 3rd party USB controller, especially if it's a Chinese clone of one. I suspect what is at play here is actually the controller rebooting, but in a short enough time period that Windows is just holding the packets instead of playing the USB disconnect/reconnect sound. My setup doesn't exhibit this issue, so I can't oscilloscope it to figure out what's going on.
Boards running QMK/TMK are at the forefront of development. The source is open, so you can tinker to your hearts content. The community has greatly expanded what is possible on a keyboard in those source trees (double shot, tap dance, split keyboards using a serial communication for cross-half communication, RGB underglow, I2C screens to indicate layer status etc). Downside is that it's harder to program than Bootmapper Client or JigOn. If your board is supported well by one of the web configurators, then it's just slightly more difficult. If it's not, or you need to add support yourself then you'll need some basic C++ knowledge. It's far from rocket science, but the knowledge floor for being able to work in the QMK source tree is far from 0.
Boards running Bootmapper Client are generally easier to program but they're missing some of the advanced features that QMK offers. Worth noting if you're into RGB, both Bootmapper Client and JigOn have better RGB underglow support than QMK does. QMK has a number of RGB modes, but it's lacking per LED RGB control which both JigOn and Bootmapper Client offers. Someone with the right skills could add it to QMK, but so far no one has stepped up.* JigOn and Bootmapper Client both use an outboard RGB LED controller on all of their designs, so the effects are a little more advanced plus they don't slow down the controller like RGB on QMK does. Someone on reddit measured controller response using the various RGB effects and the impact was all sub-1ms but it was measurable. Unfortunately, they deleted their account and I can't seem to find the post.
*Yes, the Zeal60 has per-RGB control but it's using an outboard RGB LED controller so that's really no help to the other 99% of QMK boards.
The part about underglow piqued my interest. Does the E6-V2 PCB have a separate RGB controller for both designs?
Not speaking authoritatively or on behalf of Exclusive, but I would assume that the QMK board does not use a separate controller as it's not needed and implementing the software side of it in QMK is non-trivial.
Is okay man .what is you said is correct. :thumb: QMK is seems not separate controller i have used it before .The part about underglow piqued my interest. Does the E6-V2 PCB have a separate RGB controller for both designs?
Not speaking authoritatively or on behalf of Exclusive, but I would assume that the QMK board does not use a separate controller as it's not needed and implementing the software side of it in QMK is non-trivial.
Yep it is .feel free terry.Is okay man .what is you said is correct. :thumb: QMK is seems not separate controller i have used it before .The part about underglow piqued my interest. Does the E6-V2 PCB have a separate RGB controller for both designs?
Not speaking authoritatively or on behalf of Exclusive, but I would assume that the QMK board does not use a separate controller as it's not needed and implementing the software side of it in QMK is non-trivial.
2) There appears to be much longer periods of lag when using a 32a controller on a 3rd party USB controller, especially if it's a Chinese clone of one. I suspect what is at play here is actually the controller rebooting, but in a short enough time period that Windows is just holding the packets instead of playing the USB disconnect/reconnect sound. My setup doesn't exhibit this issue, so I can't oscilloscope it to figure out what's going on.
Not speaking authoritatively or on behalf of Exclusive, but I would assume that the QMK board does not use a separate controller as it's not needed and implementing the software side of it in QMK is non-trivial.
Sounds reasonable.
So we could conclude that the little delay the V-USB is imposing on the bootmapper client boards will probably be matched by the extra time spent controlling the LEDs on the QMK boards. Unless the board runs a faulty USB controller as well?
Kind of wish there was support for a separate RGB-controller in QMK, though. Not really though.
Edit:
Although this is probably pretty negligible for RGB underglow. Especially when it's just side-glow, as it is for this board.
On another note I should just not post things when I'm tired. Per key RGB != RGB underglow. Time for coffee...
Is the brass pvd coated or something different?
Sent from my iPhone using Tapatalk
Is the brass pvd coated or something different?I will update the different pvd and coated
Sent from my iPhone using Tapatalk
Last two hours .if u guys really wants
Fill the form I will take u order in queue
It may last production
从我的 iPhone 发送,使用 Tapatalk
Will the PCB with the centered USB still be for sale after the GB?Yep as u said is have
Does the PCB have any other LEDs besides underglow?
Oh nice, thanks. That first picture slipped by meLast two hours .if u guys really wants
Fill the form I will take u order in queue
It may last production
从我的 iPhone 发送,使用 Tapatalk
Woohoo! Can't wait to see production photos :)
Kafka, these are the photos he gave for brass and purple...Show Image(https://geekhack.org/index.php?action=dlattach;topic=90787.0;attach=176467)Show Image(https://geekhack.org/index.php?action=dlattach;topic=90787.0;attach=176420)
Yeah if anyone who was in the GB before isn't back in they should definitely rejoin. Exclusive is a wonderful person and this board is going to be amazing. Thanks again for all the dedication and help exclusive you are the dude.Thanks man .
We are in national day ,during 1rd-8rd all industries.Noted, but did you have an updated spreadsheet for all the orders paid?
Yep I have it I will sent to u guys tomorrow or later day . In vacation traffic jamWe are in national day ,during 1rd-8rd all industries.Noted, but did you have an updated spreadsheet for all the orders paid?
Sent from my SM-G935F using Tapatalk
Vacation traffic jam sounds horrible hope you get home on time. Have a good holiday.Yep I have it I will sent to u guys tomorrow or later day . In vacation traffic jamWe are in national day ,during 1rd-8rd all industries.Noted, but did you have an updated spreadsheet for all the orders paid?
Sent from my SM-G935F using Tapatalk
Sorry
i have sent a email to the orders /
plz check it
i have sort it whole day if not correct plz tell me
our country still in national day .
if is incorrect i will update it few days later
thanks .appreciate it . :)
i have sent a email to the orders /
plz check it
i have sort it whole day if not correct plz tell me
our country still in national day .
if is incorrect i will update it few days later
thanks .appreciate it . :)
Thanks Exclusive! You are the bomb!
Plz check the email i have sent the order information
the deadline is 8/10
thanks .
Exclusive will we see updated Order List this weekend? Also ETA on brass finish option? Many thanks!I have sent the email to u
Exclusive will we see updated Order List this weekend? Also ETA on brass finish option? Many thanks!I have sent the email to u
All orders brass option after brass done
I know itExclusive will we see updated Order List this weekend? Also ETA on brass finish option? Many thanks!I have sent the email to u
All orders brass option after brass done
What I mean is do you have something like this from Page 1?
CHECK YOUR ORDERS HERE: https://goo.gl/ECrWvU
just wondering if there is an updated one we can see. ;D
Understood and thanksI know itExclusive will we see updated Order List this weekend? Also ETA on brass finish option? Many thanks!I have sent the email to u
All orders brass option after brass done
What I mean is do you have something like this from Page 1?
CHECK YOUR ORDERS HERE: https://goo.gl/ECrWvU
just wondering if there is an updated one we can see. ;D
Need time to sorting it one by one
But I have sent u guys personal informations to check
I will do it after ensure is all right
Sorry for the delay
I am come back ,my vacation is end
I have take order to factory it may working now
And I will ensure it .
Thanks guys
Have a good day
Sorry for the delay
I am come back ,my vacation is end
I have take order to factory it may working now
And I will ensure it .
Thanks guys
Have a good day
Exclusive, just letting you know Oscar2177 bought my spot. =) He'll message you the new shipping details.I got it
Exclusive, just letting you know Oscar2177 bought my spot. =) He'll message you the new shipping details.I got it
;)
just update: more prototype coming next week by me and excluisve. At end of 2017, I will have a very special E6-V2 edition, which support ALPS, limit to 10pcs, and ready to sell, not GroupBuy.
just update: more prototype coming next week by me and excluisve. At end of 2017, I will have a very special E6-V2 edition, which support ALPS, limit to 10pcs, and ready to sell, not GroupBuy.
Hi Exclusive,I have take u order in queue said it before:)
Is it too late to pay ?
Hey exclusive; hope everything is going well. How is production moving along? Any tease pics to share with us?Yep i will post later
Gib me endgameHey exclusive; hope everything is going well. How is production moving along? Any tease pics to share with us?Yep i will post later
Gib me endgameHey exclusive; hope everything is going well. How is production moving along? Any tease pics to share with us?Yep i will post later
I PM'd you ExclusiveLet me check sry
Thanks for being so active in the thread, Exclusive! Hope all is well. :)We hope so
Hi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Hi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Nope.someone who got edition have not order from me .also u havent got edition in the old listHi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Did all the founders edition people actually order? My invoice was e33 if I remember right but I don’t believe I originally got founders edition.
Nope.someone who got edition have not order from me .also u havent got edition in the old listHi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Did all the founders edition people actually order? My invoice was e33 if I remember right but I don’t believe I originally got founders edition.
Yep,is 12Nope.someone who got edition have not order from me .also u havent got edition in the old listHi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Did all the founders edition people actually order? My invoice was e33 if I remember right but I don’t believe I originally got founders edition.
That looks nice, I don't even know if the spot I got was a founders. Do you happen to know exclusive?
Yep,is 12Nope.someone who got edition have not order from me .also u havent got edition in the old listHi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
So the spot I bought was a founders? Sorry just a little confused.
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Did all the founders edition people actually order? My invoice was e33 if I remember right but I don’t believe I originally got founders edition.
That looks nice, I don't even know if the spot I got was a founders. Do you happen to know exclusive?
i will post list before shipping.
Nope.someone who got edition have not order from me .also u havent got edition in the old listHi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Did all the founders edition people actually order? My invoice was e33 if I remember right but I don’t believe I originally got founders edition.
I will post the number who was got and the rest of number ,also the order list ,next few days .coz i am busy with my job and personal things .thanks allNope.someone who got edition have not order from me .also u havent got edition in the old listHi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Did all the founders edition people actually order? My invoice was e33 if I remember right but I don’t believe I originally got founders edition.
Does that mean it’s possible to upgrade? I’d love numbered ones if possible, I originally tried to get one but was barely too late lol. but totally understand if you arent doing that. Figure it doesn’t hurt to ask :D
If it’s possible just shoot me an invoice for whatever the difference is. If not, no worries.
I will post the number who was got and the rest of number ,also the order list ,next few days .coz i am busy with my job and personal things .thanks allNope.someone who got edition have not order from me .also u havent got edition in the old listHi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Did all the founders edition people actually order? My invoice was e33 if I remember right but I don’t believe I originally got founders edition.
Does that mean it’s possible to upgrade? I’d love numbered ones if possible, I originally tried to get one but was barely too late lol. but totally understand if you arent doing that. Figure it doesn’t hurt to ask :D
If it’s possible just shoot me an invoice for whatever the difference is. If not, no worries.
Thursday,i will go to factory and share the pic .i am outside :)I will post the number who was got and the rest of number ,also the order list ,next few days .coz i am busy with my job and personal things .thanks allNope.someone who got edition have not order from me .also u havent got edition in the old listHi guys
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Did all the founders edition people actually order? My invoice was e33 if I remember right but I don’t believe I originally got founders edition.
Does that mean it’s possible to upgrade? I’d love numbered ones if possible, I originally tried to get one but was barely too late lol. but totally understand if you arent doing that. Figure it doesn’t hurt to ask :D
If it’s possible just shoot me an invoice for whatever the difference is. If not, no worries.
Thanks :) Looking forward to it. Hope production is going well :)
Thursday,i will go to factory and share the pic .i am outside :)
Hi guysThe numbering being *slanted* is kinda strange since the E6_V2 part is not. Anyways I'm super excited for my founders edition :D
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
Yep is not the same fontHi guysThe numbering being *slanted* is kinda strange since the E6_V2 part is not. Anyways I'm super excited for my founders edition :D
i have finish the weight letter .
it designed by damonskv `s wife thanks
here the picShow Image(https://i.imgur.com/o3ROSxE.png)
I have visit factory yesterday
Here is some pics
I have visit factory yesterday
Here is some pics
I think it would be better if you just change your name insteadI have visit factory yesterday
Here is some pics
That looks great, I had a question Exclusive. The person I bought the spot from had previously decided what he wanted engraved in his nameplate and had let you know. By any chance is it possible for me to change what gets engraved in the plate?
emm.plz pm me the details and u changeI have visit factory yesterday
Here is some pics
That looks great, I had a question Exclusive. The person I bought the spot from had previously decided what he wanted engraved in his nameplate and had let you know. By any chance is it possible for me to change what gets engraved in the plate?
I have visit factory yesterday
Here is some pics
Sure, if all things on track it may be ship out in the end of NovI have visit factory yesterday
Here is some pics
Awesome!! Is it on schedule to ship before end of year?
Updated guys
Is ready done here is the pictures
Is coming soon !
Yep .chang it ,is make more convenienceUpdated guys
Is ready done here is the pictures
Is coming soon !
Is that plate incomplete? Or did the design change? The original plate / case looked top mounted:Show Image(https://i.imgur.com/cfq8wcV.jpg)
The one you posted looks like it would be gasket/clamp mounted (which doesn't necessarily bother me), just curious.
Yep .chang it ,is make more convenienceUpdated guys
Is ready done here is the pictures
Is coming soon !
Is that plate incomplete? Or did the design change? The original plate / case looked top mounted:Show Image(https://i.imgur.com/cfq8wcV.jpg)
The one you posted looks like it would be gasket/clamp mounted (which doesn't necessarily bother me), just curious.
No worry is tight enough .just tight tolerancesYep .chang it ,is make more convenienceUpdated guys
Is ready done here is the pictures
Is coming soon !
Is that plate incomplete? Or did the design change? The original plate / case looked top mounted:Show Image(https://i.imgur.com/cfq8wcV.jpg)
The one you posted looks like it would be gasket/clamp mounted (which doesn't necessarily bother me), just curious.
As long as it's machined well and it clamps tight and doesn't woble and doesn't leave a gap I'm perfectly fine with it. I think the main reason people do top mount is it's hard to to a clamp mount that is tight with no gap. Is it using a gasket? Or just tight tolerances?
No worry is tight enough .just tight tolerancesYep .chang it ,is make more convenienceUpdated guys
Is ready done here is the pictures
Is coming soon !
Is that plate incomplete? Or did the design change? The original plate / case looked top mounted:Show Image(https://i.imgur.com/cfq8wcV.jpg)
The one you posted looks like it would be gasket/clamp mounted (which doesn't necessarily bother me), just curious.
As long as it's machined well and it clamps tight and doesn't woble and doesn't leave a gap I'm perfectly fine with it. I think the main reason people do top mount is it's hard to to a clamp mount that is tight with no gap. Is it using a gasket? Or just tight tolerances?
Updated guys
Is ready done here is the pictures
Is coming soon !
ThanksUpdated guys
Is ready done here is the pictures
Is coming soon !
That looks soo nice, It's the same colors as the one I got. Can't wait for everything to finish. Hope everything turns out well exclusive.
ThanksUpdated guys
Is ready done here is the pictures
Is coming soon !
That looks soo nice, It's the same colors as the one I got. Can't wait for everything to finish. Hope everything turns out well exclusive.
I have saw u pm but today I am in factory ,tomorrow I will check it again
I have make a new sheet ,which all information is hereGreat work, man. Looking forward to the end of November ;)
if have any mistake plz pm me here on gh not email
thanks all.
https://docs.google.com/spreadsheets/d/1UrUP8ufV3lFuJtnk6Bw2b3kcig6vGFWc6EE35jTFAQo/edit?usp=sharing
I see I‘m still on there. What does the blue color mean?Is means is making but order not paid :)
Gesendet von iPhone mit Tapatalk
So can I pay and get the board?^^ Haven‘t had my money back when you invoiced.Yep is belong to u
Gesendet von iPhone mit Tapatalk
I have make a new sheet ,which all information is here
if have any mistake plz pm me here on gh not email
thanks all.
https://docs.google.com/spreadsheets/d/1UrUP8ufV3lFuJtnk6Bw2b3kcig6vGFWc6EE35jTFAQo/edit?usp=sharing
How will the founders numbers work? Since there are not the same amount of total founders
How will the founders numbers work? Since there are not the same amount of total founders
If there's extra one's, I am in :)
Man those pics of the cases look sweet. Makes all wait and the confusion fly out the window! Sad to see the plate get changed, but this is probably for the best. So glad I stayed in the GB.
Man those pics of the cases look sweet. Makes all wait and the confusion fly out the window! Sad to see the plate get changed, but this is probably for the best. So glad I stayed in the GB.
So is there only 2 pieces to the keyboard instead of 3 or how is it. I got a little confused when I read that.
Man those pics of the cases look sweet. Makes all wait and the confusion fly out the window! Sad to see the plate get changed, but this is probably for the best. So glad I stayed in the GB.No worry plate change just make it swap convenience
Is 5 pieces . Top plate middle bottom weightMan those pics of the cases look sweet. Makes all wait and the confusion fly out the window! Sad to see the plate get changed, but this is probably for the best. So glad I stayed in the GB.
So is there only 2 pieces to the keyboard instead of 3 or how is it. I got a little confused when I read that.
To be clear. As long as the machining tolerance is tight, this design should be MORE stable, not less. The plate should be supported on the entirety of every edge by the case. As long as the cutout is the same depth as the plate, which should be extremely consistent since they just cut them from prefabbed sheets, there is no issue. The risks come from the gap being to small which would leave a gap between the top case and the mid case, or too big, in which case the plate could move up and down. As long as the size is right though, it’s better. Plus it makes it much much easier to swap plates.Yep ,top and mid have a gap is 1.5mm depth so plate place on there .
I’m actually kinda excited it’s gasket mount, it’s way less common.
Exclusive says there is no wobble, and I have no reason to not believe him, so in my book this is a good thing.
yea a lot of people prefer gasket mount over top mount too. The gaskets allow a more soft? typing experiences since its not fixed top plate. 356 minis were gasket mounted
yea a lot of people prefer gasket mount over top mount too. The gaskets allow a more soft? typing experiences since its not fixed top plate. 356 minis were gasket mounted
Technically I think this is considered a sandwich mount. Gasket would have something soft to hold the plate tight. Like a rubber ring around the edge of the plate. If you put the gasket under the plate you get a softer feel, if the gasket is above the plate it just holds it tight.
In theory Exclusive could make a gasket mount mod for this since it would just involve making a top or mid case with a deeper cut. The harder part would just be getting a decent gasket.
yea a lot of people prefer gasket mount over top mount too. The gaskets allow a more soft? typing experiences since its not fixed top plate. 356 minis were gasket mounted
Technically I think this is considered a sandwich mount. Gasket would have something soft to hold the plate tight. Like a rubber ring around the edge of the plate. If you put the gasket under the plate you get a softer feel, if the gasket is above the plate it just holds it tight.
In theory Exclusive could make a gasket mount mod for this since it would just involve making a top or mid case with a deeper cut. The harder part would just be getting a decent gasket.
I'd def pay to get a gasket option.
Case were ready done , it wont have gasket option guys
Yea,i know it may support in next 60% project.Case were ready done , it wont have gasket option guys
I mean like an add on. Not a change to existing orders.
It would 100% be possible to make a midcase that was a little deeper and had room for an oring like a 356:Show Image(http://i.imgur.com/3GIR9QJ.jpg)
And I just mean it's possible. I have no clue if there would be enough interest to justify it. But I could totally see ordering another midcase/plate just for gasket, even if I had to wait another few months to get the new parts. The point is you already have the CNC design done, adding an oring would just be cutting more out of your existing design. Now if it's worth it? Who knows.
Either way, I AM NOT suggesting that you delay this gb for gasket mount. My point is you could sell it as an add on kit to people who already got E6-V2.
i havent get 356mini so i dont know about gasket what actually is ? sry.
Oh, and to be clear, that isn't to scale or anything. Just meant to convey the concept.Got it thanks .have a lesson to me . :thumb:
Theres lots of ways you can mount the oring, to the plate, to the case, you could just use rubber strips on top and bottom. You could make the rubber stay in place better make making it inset into the midcase.
Gasket style cases are super uncommon though, so I do think there would be good interest in general for a nice one.
Finally I got brass weight
But I have a question what is kind of treatment it should be
Keep it real or sanding blasting ,
pvd I think not better it will make weight thicken that may can't put in bottom
what is u guys opinion there only choose one road
Finally I got brass weight
But I have a question what is kind of treatment it should be
Keep it real or sanding blasting ,
pvd I think not better it will make weight thicken that may can't put in bottom
what is u guys opinion there only choose one road
I agree, I just saw someone post a picture of the brass weight on the m65 and it looks nice.
Shiny is best option, if possible...
Finally I got brass weight
But I have a question what is kind of treatment it should be
Keep it real or sanding blasting ,
pvd I think not better it will make weight thicken that may can't put in bottom
what is u guys opinion there only choose one road
Shiny is best option, if possible...
Finally I got brass weightWould prefer shiny.
But I have a question what is kind of treatment it should be
Keep it real or sanding blasting ,
pvd I think not better it will make weight thicken that may can't put in bottom
what is u guys opinion there only choose one road
Finally I got brass weight
But I have a question what is kind of treatment it should be
Keep it real or sanding blasting ,
pvd I think not better it will make weight thicken that may can't put in bottom
what is u guys opinion there only choose one road
Shiny is best option, if possible...
Finally I got brass weightWould prefer shiny.
But I have a question what is kind of treatment it should be
Keep it real or sanding blasting ,
pvd I think not better it will make weight thicken that may can't put in bottom
what is u guys opinion there only choose one road
Sent from my SM-G935F using Tapatalk
Is the last picture sandblasted as well? It looks niceyea,but cant touch by u hand need glove maybe ..... :-X :-X :-X
Here is the pictures is real
sanding blasting is like prototype .
sanding blasting is have a shortcoming when u touch it ,will leave u fingerprint :-\ but it can antirust
finger prints cant be removed i will post a pictureHere is the pictures is real
sanding blasting is like prototype .
sanding blasting is have a shortcoming when u touch it ,will leave u fingerprint :-\ but it can antirust
I'm definitely in the sandblasted group then. Cleaning finger prints is way easier than rust. Plus it looks great!
So. plz choose it keep it- raw or sanding blasting
let me know thanks
finger prints cant be removed i will post a pictureHere is the pictures is real
sanding blasting is like prototype .
sanding blasting is have a shortcoming when u touch it ,will leave u fingerprint :-\ but it can antirust
I'm definitely in the sandblasted group then. Cleaning finger prints is way easier than rust. Plus it looks great!
I will make a sure then let u guys know it
Wait it .
I will make a sure then let u guys know it
Wait it .
Is just the weight that you cannot do PVD?
If mid & plate is not PVD, I don’t want the brass :(
I will make a sure then let u guys know it
Wait it .
Is just the weight that you cannot do PVD?
If mid & plate is not PVD, I don’t want the brass :(
Have you ever had brass with PVD? I have and it scratches and attracts a lot of grime... at least shiny pvd does. I would much rather have it raw/sandblasted
Depends on the board, Kafka. Some are brushed.
Depends on the board, Kafka. Some are brushed.
Where were you when I asked in Discord bruv. Also I think one of the otd weights I linked is brushed aswell, so yea depends.
It would be really great if there was some kind of protective coating on the plate to prevent tarnishing, it's really hard to clean the plate when the board is assembled.
As long as the weight is lightly sandblasted it's fine for me, if the front face was polished it would probably be even easier to clean off tarnish, but I can live with a light sandblast.
the whole reason brass parts are so popular in the first place is tarnishing
you can buy a can of brass lacquer if you don't want that to happen
you can buy a can of brass lacquer if you don't want that to happen
today I and exclusive have a lessonShow Image(https://i.imgur.com/kA9RSKM.jpg)
today I and exclusive have a lessonShow Image(https://i.imgur.com/kA9RSKM.jpg)
today I and exclusive have a lessonShow Image(https://i.imgur.com/kA9RSKM.jpg)
All parts done ,but left port plate have some problem
So I am fix it and re make it
Here is the pic also wait to anodizing
About brass i am testing .will find a best way to deal it .
All parts done ,but left port plate have some problem
So I am fix it and re make it
Here is the pic also wait to anodizing
All parts done ,but left port plate have some problem
So I am fix it and re make it
Here is the pic also wait to anodizing
All parts done ,but left port plate have some problem
So I am fix it and re make it
Here is the pic also wait to anodizing
I read on the E8-V1 group buy chat that SA profile was an issue due to the small gap or something. Will we have an issue with that, I joined a sa group buy in august just for this board.
Pcb backlight testing
Pcb backlight testing
Pcb backlight testing
Any new updates until now Exclusive? :D :DNot yet .still waiting it :-[
Personal advise sanding is okay just keep u hands clean
no sweat /no grease
i like this it would be oxidized
https://imgur.com/a/pEJ6B
Personal advise sanding is okay just keep u hands cleanLooks great
no sweat /no grease
i like this it wont be oxidized
https://imgur.com/a/pEJ6B
Personal advise sanding is okay just keep u hands clean
no sweat /no grease
i like this it wont be oxidized
https://imgur.com/a/pEJ6B
Very yes vote from me too, Exclusive... this looks delicious!! Seems very similar to the X60 finish (correct Xondat?) and that has held up really well for me.
Personal advise sanding is okay just keep u hands clean
no sweat /no grease
i like this it wont be oxidized
https://imgur.com/a/pEJ6B
Personal advise sanding is okay just keep u hands clean
no sweat /no grease
i like this it wont be oxidized
https://imgur.com/a/pEJ6B
No words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
No words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
No words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
And now I regret not getting MAO :(
And now I regret not getting MAO :(
I originally ordered it and changed it at the end. I kinda regret it too now cause that looks super nice.
I realized that while I really like the idea of a white case, I wouldn’t like how it looks with a lot of caps. It would look fantastic with a few of course.
The white with those clean round edges look fantastic tho. Choices are hard.
No words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
No words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
No words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
looks great, however I have a question about the pcb, my concern is that the switches upside down, I hope this is only a test pcb
Well, there is almost no difference, but with cherry profile keycaps, you may find that r3 may touch the switch housingNo words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
looks great, however I have a question about the pcb, my concern is that the switches upside down, I hope this is only a test pcb
Correct me if I'm wrong, but that shouldn't matter.
Well, there is almost no difference, but with cherry profile keycaps, you may find that r3 may touch the switch housingNo words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
looks great, however I have a question about the pcb, my concern is that the switches upside down, I hope this is only a test pcb
Correct me if I'm wrong, but that shouldn't matter.
Well, there is almost no difference, but with cherry profile keycaps, you may find that r3 may touch the switch housingNo words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
looks great, however I have a question about the pcb, my concern is that the switches upside down, I hope this is only a test pcb
Correct me if I'm wrong, but that shouldn't matter.
I didn’t think it mattered. I’ve had both and never had issues with GMK
Well, there is almost no difference, but with cherry profile keycaps, you may find that r3 may touch the switch housingNo words,just some picture take by my poor smartphone.
btw,the founders edition the numbers 1-33
(1 5 12 9 20 13 24 2 29) those are not available ,so it have the rest number .Show Image(https://i.imgur.com/uP73iKe.jpg)
https://imgur.com/a/gJ4qZ
looks great, however I have a question about the pcb, my concern is that the switches upside down, I hope this is only a test pcb
Correct me if I'm wrong, but that shouldn't matter.
I didn’t think it mattered. I’ve had both and never had issues with GMK
I've only had issues with Cherry profile if you used north facing leds.
(i prefer south facing for no issues)
If someone want get founder edition
plz post here let me know 7th is the endline
(1 5 12 9 20 13 24 2 29) those are not available
If someone want get founder edition
plz post here let me know 7th is the endline
(1 5 12 9 20 13 24 2 29) those are not available
If someone want get founder edition
plz post here let me know 7th is the endline
(1 5 12 9 20 13 24 2 29) those are not available
Edit: Just saw your email. I would like # 11 and 19
If someone want get founder edition
plz post here let me know 7th is the endline
(1 5 12 9 20 13 24 2 29) those are not available
If someone want get founder edition
plz post here let me know 7th is the endline
(1 5 12 9 20 13 24 2 29) those are not available
Emmm I forget it someone have take 23 I not to write done itIf someone want get founder edition
plz post here let me know 7th is the endline
(1 5 12 9 20 13 24 2 29) those are not available
I'll take #23
Ill take number 4 if it is still availible :)Emmm I forget it someone have take 23 I not to write done itIf someone want get founder edition
plz post here let me know 7th is the endline
(1 5 12 9 20 13 24 2 29) those are not available
I'll take #23
So 1 15 12 9 20 13 24 2 29 23 not available
I‘d pay for #2!Wait you had to pay to use the restroom
Gesendet von iPhone mit Tapatalk
I‘d pay for #2!Wait you had to pay to use the restroom
Gesendet von iPhone mit Tapatalk
Sent from my SM-G935F using Tapatalk
Sorry ****ty Dad joke... #2... You know..I‘d pay for #2!Wait you had to pay to use the restroom
Gesendet von iPhone mit Tapatalk
Sent from my SM-G935F using Tapatalk
If that is a joke I sadly do not get it :-[
All colors was done
I will show the pictures later
Now I am sorting the founders number and ready to engraving (and name plate )
Also I have to customize box
All colors was done
I will show the pictures later
Now I am sorting the founders number and ready to engraving (and name plate )
Also I have to customize box
Founders number I will pm you to confirm
All colors was done
I will show the pictures later
Now I am sorting the founders number and ready to engraving (and name plate )
Also I have to customize box
All colors was done
I will show the pictures later
Now I am sorting the founders number and ready to engraving (and name plate )
Also I have to customize box
I'm very excited. I also have to say, at least so far you have done an amazing job with this GB. You have some of the best and most consistent communication of any GB I've ever dealt with :D. Thanks for making this happen.
All colors was done
I will show the pictures later
Now I am sorting the founders number and ready to engraving (and name plate )
Also I have to customize box
I'd like to second how well this group buy has been run after you took full control. And am really excited to see my board!
All colors was done
I will show the pictures later
Now I am sorting the founders number and ready to engraving (and name plate )
Also I have to customize box
I'm very excited. I also have to say, at least so far you have done an amazing job with this GB. You have some of the best and most consistent communication of any GB I've ever dealt with :D. Thanks for making this happen.All colors was done
I will show the pictures later
Now I am sorting the founders number and ready to engraving (and name plate )
Also I have to customize box
I'd like to second how well this group buy has been run after you took full control. And am really excited to see my board!
don't count your chickens before they hatch
wait for the boards to show up, i'd like to reinforce exclusive has not shown exceptional skill in shipping
Founders number I will pm you to confirm
I got u message
Founders number I will pm you to confirm
Has anyone gotten their pm yet?
Here is the pictures
i am wait box arrival
i will ship it out before 20th. :thumb:
https://imgur.com/a/JqIMI
Here is the pictures
i am wait box arrival
i will ship it out before 20th. :thumb:
https://imgur.com/a/JqIMI
What?? This is insanely awesome. You’re the man, Exclusive!!
Any pics of those delicious brass middles...?
Purple looks awesome. So does pink though. Can’t wait.
Purple looks awesome. So does pink though. Can’t wait.
I can only see the one of the purple or pink in the photos. Which color are you talking about?
Purple looks awesome. So does pink though. Can’t wait.
I can only see the one of the purple or pink in the photos. Which color are you talking about?
Derp. My ipad switched to Night Shift and i didnt realize it, so made blue look purple lol. I'm happy either way tho lol. both look good to me.
Here is the pictures
i am wait box arrival
i will ship it out before 20th. :thumb:
https://imgur.com/a/JqIMI
Which one of these is MAO and other is apple silver? Is the TOP MAO?Show Image(https://i.imgur.com/C7tDuKv.jpg)
Which one of these is MAO and other is apple silver? Is the TOP MAO?Show Image(https://i.imgur.com/C7tDuKv.jpg)
bottom is MAO, top is silver
Here is the pictures
i am wait box arrival
i will ship it out before 20th. :thumb:
https://imgur.com/a/JqIMI
Case was done
i will sent it avoid holidays it seems that express was mess
btw ,someone ask for the edition number i have make it .
someone have buy extra plate but it seems dont buy the extra pcb .plz check it .Show Image(https://i.imgur.com/FlW8ZWT.jpg)Show Image(https://i.imgur.com/uBbyeJ0.jpg)Show Image(https://i.imgur.com/bAnY3tu.jpg)
Case was done
i will sent it avoid holidays it seems that express was mess
btw ,someone ask for the edition number i have make it .
someone have buy extra plate but it seems dont buy the extra pcb .plz check it .Show Image(https://i.imgur.com/FlW8ZWT.jpg)Show Image(https://i.imgur.com/uBbyeJ0.jpg)Show Image(https://i.imgur.com/bAnY3tu.jpg)
Case was done
i will sent it avoid holidays it seems that express was mess
btw ,someone ask for the edition number i have make it .
someone have buy extra plate but it seems dont buy the extra pcb .plz check it .Show Image(https://i.imgur.com/FlW8ZWT.jpg)Show Image(https://i.imgur.com/uBbyeJ0.jpg)Show Image(https://i.imgur.com/bAnY3tu.jpg)
DHL i will use .Case was done
i will sent it avoid holidays it seems that express was mess
btw ,someone ask for the edition number i have make it .
someone have buy extra plate but it seems dont buy the extra pcb .plz check it .Show Image(https://i.imgur.com/FlW8ZWT.jpg)Show Image(https://i.imgur.com/uBbyeJ0.jpg)Show Image(https://i.imgur.com/bAnY3tu.jpg)
What will be your shipping date, shipping speed, and the company you will use to ship. Just curious.
DHL i will use .Case was done
i will sent it avoid holidays it seems that express was mess
btw ,someone ask for the edition number i have make it .
someone have buy extra plate but it seems dont buy the extra pcb .plz check it .Show Image(https://i.imgur.com/FlW8ZWT.jpg)Show Image(https://i.imgur.com/uBbyeJ0.jpg)Show Image(https://i.imgur.com/bAnY3tu.jpg)
What will be your shipping date, shipping speed, and the company you will use to ship. Just curious.
plz check u guys order again.
https://docs.google.com/spreadsheets/d/1UrUP8ufV3lFuJtnk6Bw2b3kcig6vGFWc6EE35jTFAQo/edit#gid=2052738676DHL i will use .Case was done
i will sent it avoid holidays it seems that express was mess
btw ,someone ask for the edition number i have make it .
someone have buy extra plate but it seems dont buy the extra pcb .plz check it .Show Image(https://i.imgur.com/FlW8ZWT.jpg)Show Image(https://i.imgur.com/uBbyeJ0.jpg)Show Image(https://i.imgur.com/bAnY3tu.jpg)
What will be your shipping date, shipping speed, and the company you will use to ship. Just curious.
plz check u guys order again.
Check where?
It looks like my order is different this time from when I last checked. The last time I checked I had ordered an extra carbon plate but no extra PCB. While this was intentional when I ordered (because I simply did not have the money for the extra PCB) I'd like to add an extra QMK PCB to my order. Also please make sure that the extra Carbon plate is added as well, because I already paid for that.have u tell me change cf plate to brass?
I told you to change Steel to Brass.It looks like my order is different this time from when I last checked. The last time I checked I had ordered an extra carbon plate but no extra PCB. While this was intentional when I ordered (because I simply did not have the money for the extra PCB) I'd like to add an extra QMK PCB to my order. Also please make sure that the extra Carbon plate is added as well, because I already paid for that.have u tell me change cf plate to brass?
PM UI told you to change Steel to Brass.It looks like my order is different this time from when I last checked. The last time I checked I had ordered an extra carbon plate but no extra PCB. While this was intentional when I ordered (because I simply did not have the money for the extra PCB) I'd like to add an extra QMK PCB to my order. Also please make sure that the extra Carbon plate is added as well, because I already paid for that.have u tell me change cf plate to brass?
Would be nice if I could get a weight number. Never mind if that’s not possible.U ask 2 is belong to Kafka :(
3? 4? 5?
3? 4? 5?
I have 3. CHeck the spreadsheet above to see what’s taken, and pick something not on that list!
Today I have talked to dhl agencry which nearby me
However ,he said if sent package u guys may get it spend ten days .
Coz Christmas coming soon ,and they are arrange storage we need queue
It will be mess also easy to lost .his advise was sent it after Christmas it may be fast just need 3-4days
What is u guys thinking that .
Today I have talked to dhl agencry which nearby me
However ,he said if sent package u guys may get it spend ten days .
Coz Christmas coming soon ,and they are arrange storage we need queue
It will be mess also easy to lost .his advise was sent it after Christmas it may be fast just need 3-4days
What is u guys thinking that .
After Christmas is fine with me. I'm not in any rush and I'd rather get my stuff later rather than never.
After Christmas sounds good :thumb: . (but send more teaser pics pls :)) )
After Christmas sounds good :thumb: . (but send more teaser pics pls :)) )I will
Today I have talked to dhl agencry which nearby meAfter Xmas works for me :)
However ,he said if sent package u guys may get it spend ten days .
Coz Christmas coming soon ,and they are arrange storage we need queue
It will be mess also easy to lost .his advise was sent it after Christmas it may be fast just need 3-4days
What is u guys thinking that .
Thanks Exclusive for the fast shipping! :thumb: :thumb: :thumb:
I received mine today: MAO with everything else brassed.
(Attachment Link)
(Attachment Link)
I ordered an Founder Edition, however, Exclusive told me after MAO the weight cannot be put inside. So I have to change into the normal weight. (no idea why their sizes are different)
(Attachment Link)
(Attachment Link)
Scratches :-\ :-\ :-\
Thanks Exclusive for the fast shipping! :thumb: :thumb: :thumb:
I received mine today: MAO with everything else brassed.
(Attachment Link)
(Attachment Link)
I ordered an Founder Edition, however, Exclusive told me after MAO the weight cannot be put inside. So I have to change into the normal weight. (no idea why their sizes are different)
(Attachment Link)
(Attachment Link)
Scratches :-\ :-\ :-\
Wonder how that happened. Looks nice otherwise. Looking at the other photo, I'm wondering if the screws/stabs or w/e were what did it. If thats the case though should only take a bit of foam to cover it.
How's the overall fit/finish aside from the 1 scratch?
Yea .only the number 25 brasse can't be fit in
Because Mao increase thickness so just this one brass can't fit in
In pictures we can see it ,brass fit in
No worry that it can fit or not.
About scratch I have exchange for him
Thanks all
Yea .only the number 25 brasse can't be fit in
Because Mao increase thickness so just this one brass can't fit in
In pictures we can see it ,brass fit in
No worry that it can fit or not.
About scratch I have exchange for him
Thanks all
Do you know when you will ship others mine is order 12.
Today I have talked to dhl agencry which nearby me
However ,he said if sent package u guys may get it spend ten days .
Coz Christmas coming soon ,and they are arrange storage we need queue
It will be mess also easy to lost .his advise was sent it after Christmas it may be fast just need 3-4days
What is u guys thinking that .
Yea .only the number 25 brasse can't be fit in
Because Mao increase thickness so just this one brass can't fit in
In pictures we can see it ,brass fit in
No worry that it can fit or not.
About scratch I have exchange for him
Thanks all
Do you know when you will ship others mine is order 12.Today I have talked to dhl agencry which nearby me
However ,he said if sent package u guys may get it spend ten days .
Coz Christmas coming soon ,and they are arrange storage we need queue
It will be mess also easy to lost .his advise was sent it after Christmas it may be fast just need 3-4days
What is u guys thinking that .
Sounds like next week unless I'm missing something.
This one was just unique because it didn't have to go international so the odds of it being lost were negligible.
Thanks Exclusive for the fast shipping! :thumb: :thumb: :thumb:
I received mine today: MAO with everything else brassed.
(Attachment Link)
(Attachment Link)
I ordered an Founder Edition, however, Exclusive told me after MAO the weight cannot be put inside. So I have to change into the normal weight. (no idea why their sizes are different)
(Attachment Link)
(Attachment Link)
Scratches :-\ :-\ :-\
Wonder how that happened. Looks nice otherwise. Looking at the other photo, I'm wondering if the screws/stabs or w/e were what did it. If thats the case though should only take a bit of foam to cover it.
How's the overall fit/finish aside from the 1 scratch?
The box is reliable, there is enough foam to protect the board. The scratch is not caused by the shipping I think, I'm reaching Exclusive for help.
I believe the packets shipping to you guys will be much safer and heavier. Exclusive and I live in the same city so the shipping box does not need too much attention.
The keyboard is overall really nice!
I love the design and the touch feeling of MAO.
Also the PCB looks more valuable than its price.
let me share more pics:
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Thanks Exclusive for the fast shipping! :thumb: :thumb: :thumb:
I received mine today: MAO with everything else brassed.
(Attachment Link)
(Attachment Link)
I ordered an Founder Edition, however, Exclusive told me after MAO the weight cannot be put inside. So I have to change into the normal weight. (no idea why their sizes are different)
(Attachment Link)
(Attachment Link)
Scratches :-\ :-\ :-\
Wonder how that happened. Looks nice otherwise. Looking at the other photo, I'm wondering if the screws/stabs or w/e were what did it. If thats the case though should only take a bit of foam to cover it.
How's the overall fit/finish aside from the 1 scratch?
The box is reliable, there is enough foam to protect the board. The scratch is not caused by the shipping I think, I'm reaching Exclusive for help.
I believe the packets shipping to you guys will be much safer and heavier. Exclusive and I live in the same city so the shipping box does not need too much attention.
The keyboard is overall really nice!
I love the design and the touch feeling of MAO.
Also the PCB looks more valuable than its price.
let me share more pics:
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Has shipping started or not yet?
Has shipping started or not yet?
Hey guysHealth first, hope you have a speedy recovery!
It will ship tomorrow
I was sick those days stay in hospital
Hey guys
It will ship tomorrow
I was sick those days stay in hospital
Hey guys
It will ship tomorrow
I was sick those days stay in hospital
Oooo
Wonder if it will make it in time for the Seattle meet up.
Either way, many excite.
What type of screw driver will I need, the screws look a little different. Want to get everything ready.
Hey guys
It will ship tomorrow
I was sick those days stay in hospital
I got a DHL shipment confirmation today. Not sure if it is this board or not but I am not expecting anything else from China! Feel better man <3
I got a DHL shipment confirmation today. Not sure if it is this board or not but I am not expecting anything else from China! Feel better man <3
I got a DHL shipment confirmation today. Not sure if it is this board or not but I am not expecting anything else from China! Feel better man <3
I also got one today, so I think they are starting to ship out! Feel better exclusive!
It was sent to my phone by a text.
I got my notice too. Should be here tomorrow :D
I got my notice too. Should be here tomorrow :D
Are you inside the US?
Show Image(https://uploads.tapatalk-cdn.com/20180105/c2b6eea24dec7c09c615051c29114559.jpg)
Aww yis
Show Image(https://uploads.tapatalk-cdn.com/20180105/c2b6eea24dec7c09c615051c29114559.jpg)
Aww yis
Show Image(https://uploads.tapatalk-cdn.com/20180105/72e15033c10906d364fc295b8887377b.jpg)
I got 2 full cases and then extra of midcase/plate.
Everything seems pretty much flawless though.
One thing I noticed is there was some sort of oil or something around the weight screw holes. I’m assuming there was some sort of lube on the screws that leaked out a bit. But it rubbed off with ISO, so who cares :D.
The finish is amazing tho. It’s sooooooo smooth.
I can’t wait to get one assembled. Fortunately my giant order of 67g zeals came today too. (The new ones are amaze, at least from the few minute I played with them).
Now to figure out how to flash the QMK pcbs.
This should be fun.
Sent from my iPhone using Tapatalk
Now to figure out how to flash the QMK pcbs.
This should be fun.
Sent from my iPhone using Tapatalk
Let me know what you do. I'm going to need to figure that out on Monday xD
Show Image(https://uploads.tapatalk-cdn.com/20180105/72e15033c10906d364fc295b8887377b.jpg)
I got 2 full cases and then extra of midcase/plate.
Everything seems pretty much flawless though.
One thing I noticed is there was some sort of oil or something around the weight screw holes. I’m assuming there was some sort of lube on the screws that leaked out a bit. But it rubbed off with ISO, so who cares :D.
The finish is amazing tho. It’s sooooooo smooth.
I can’t wait to get one assembled. Fortunately my giant order of 67g zeals came today too. (The new ones are amaze, at least from the few minute I played with them).
Now to figure out how to flash the QMK pcbs.
This should be fun.
Sent from my iPhone using Tapatalk
Let me know what you do. I'm going to need to figure that out on Monday xD
I'm TRYING to figure out the matrix, but is less than ideal since the entire pcb is matte black and you can hardly see traces. plus nothing is labeled.
The leds still come on when it plugs in tho, so it may already have something flashed, not sure how that works by default.
Now to figure out how to flash the QMK pcbs.
This should be fun.
Sent from my iPhone using Tapatalk
Let me know what you do. I'm going to need to figure that out on Monday xD
I'm TRYING to figure out the matrix, but is less than ideal since the entire pcb is matte black and you can hardly see traces. plus nothing is labeled.
The leds still come on when it plugs in tho, so it may already have something flashed, not sure how that works by default.
Can you share the file/pathway when you've got it sorted if you get it figured out first? :) have fun with the builds!
Oh, also, for those who care, pcbs seem to fit holtites perfectly. was actually hard to pop em back out lol.
I'm not using them for this specific build since i just expect to change it, but figured might as well check for other interested parties.
Oh, also, for those who care, pcbs seem to fit holtites perfectly. was actually hard to pop em back out lol.
I'm not using them for this specific build since i just expect to change it, but figured might as well check for other interested parties.
Do you just press them in or solder them?
Wow the boards are looking as good as I thought they were going to. I gotta say though, this has been one hell of a GB for most of us that stuck around from the start. Should we wait for everyone to get their boards first or should we start planning Exclusive's victory parade now?
why is there a weird switch cutout for ?/ ? (it's wider than the keycap to the right, so for some reason between ? and shift you see the pcb, not the plate. it doesn't hurt anything, I just couldn't figure out what it could possibly be for lol)
why is there a weird switch cutout for ?/ ? (it's wider than the keycap to the right, so for some reason between ? and shift you see the pcb, not the plate. it doesn't hurt anything, I just couldn't figure out what it could possibly be for lol)
So you can move ?/ over for arrow keys:Show Image(https://i.imgur.com/prcWZ91.png)
These turned out great Exclusive, congrats & thank you for your hard work.
Finaly got mine a couple minutes agoShow Image(https://uploads.tapatalk-cdn.com/20180106/bb4e7e416660da86b4779c3f47c508dd.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180106/874b989a82f2ded541f586995a348a96.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180106/2efd321a34110999d2c107a62e1f2bbf.jpg)
Looks stunning, and absolutely flawless
Edit: with optionsShow Image(https://uploads.tapatalk-cdn.com/20180106/10a614abc29f70cbdc0d182598eb6a2e.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180106/215b351b7a3b1e8ab49fdb024907e0f3.jpg)
DHL tracking number :https://i.imgur.com/eNr9Ecc.png
QMK pcb left shift led need welding a line to fix like amnesia said . FN+q /w/e/r is rgb led model .e and r was changing color
FN+c/v/b/n was led .press fn+n five times led will off.
here is qmk pcb jason file :https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0 (https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0)
Finished building mine. I'll take a better picture later but I had to post this since I think it looks amazing.
Anyone have any ideas how abouts to remove a stripped case screw..
Anyone have any ideas how abouts to remove a stripped case screw..
Which screw?
Anyone have any ideas how abouts to remove a stripped case screw..
Which screw?
Black hex case screws, one got stuck and stripped ):
DHL tracking number :https://i.imgur.com/eNr9Ecc.png
QMK pcb left shift led need welding a line to fix like amnesia said . FN+q /w/e/r is rgb led model .e and r was changing color
FN+c/v/b/n was led .press fn+n five times led will off.
here is qmk pcb jason file :https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0 (https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0)
First, in case anyone was currious, the brass midcase/plate adds ~10oz (~280g)Wow the boards are looking as good as I thought they were going to. I gotta say though, this has been one hell of a GB for most of us that stuck around from the start. Should we wait for everyone to get their boards first or should we start planning Exclusive's victory parade now?
It really is crazy how far this GB has come from the train wreck that it started with.
Exclusive has been great throughout, and I wouldn't hesitate to buy from him again, just gotta wait for the next board he makes that I want :P
- why is there 1 random silver Phillips screw for one of the mounts? (yes, i know it doesn't actually matter at all, im more curious for this one)
On the topic of screws: you included one too few in my order!
soket head cap screw M2.5 x 15 mm.On the topic of screws: you included one too few in my order!
I need a screw too. Is this a size I can get at like a hardware store like Lowes?
Anyone else have an issue when using this json layout. Im using split backspace true hhkb layout, and the top right key worked before flashing this keymap, not after - maybe the matrix is not as defined within the keymap for some reason?
https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0
Anyone else have an issue when using this json layout. Im using split backspace true hhkb layout, and the top right key worked before flashing this keymap, not after - maybe the matrix is not as defined within the keymap for some reason?
https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0
I used the set up Amnesia created. I made exactly your set up and go it to work perfectly. I could send you my keymaps file if you wanted? It is of course in c but it pretty straightforward in what it does.
Anyone else have an issue when using this json layout. Im using split backspace true hhkb layout, and the top right key worked before flashing this keymap, not after - maybe the matrix is not as defined within the keymap for some reason?
https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0
I used the set up Amnesia created. I made exactly your set up and go it to work perfectly. I could send you my keymaps file if you wanted? It is of course in c but it pretty straightforward in what it does.
Im a scrub and use the online qmk editor to add all my FN layers (basically just cloning hhkb functions), could you share a hex or something so I can give it a try and see if its a keymap issue?
Anyone else have an issue when using this json layout. Im using split backspace true hhkb layout, and the top right key worked before flashing this keymap, not after - maybe the matrix is not as defined within the keymap for some reason?
https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0
I used the set up Amnesia created. I made exactly your set up and go it to work perfectly. I could send you my keymaps file if you wanted? It is of course in c but it pretty straightforward in what it does.
Im a scrub and use the online qmk editor to add all my FN layers (basically just cloning hhkb functions), could you share a hex or something so I can give it a try and see if its a keymap issue?
Alright here is the hex I used to flash my keyboard.
Anyone else have an issue when using this json layout. Im using split backspace true hhkb layout, and the top right key worked before flashing this keymap, not after - maybe the matrix is not as defined within the keymap for some reason?
https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0
I used the set up Amnesia created. I made exactly your set up and go it to work perfectly. I could send you my keymaps file if you wanted? It is of course in c but it pretty straightforward in what it does.
Im a scrub and use the online qmk editor to add all my FN layers (basically just cloning hhkb functions), could you share a hex or something so I can give it a try and see if its a keymap issue?
Anyone else have an issue when using this json layout. Im using split backspace true hhkb layout, and the top right key worked before flashing this keymap, not after - maybe the matrix is not as defined within the keymap for some reason?
https://www.dropbox.com/s/uugwoaqwylr0e9d/jia60.json?dl=0
I used the set up Amnesia created. I made exactly your set up and go it to work perfectly. I could send you my keymaps file if you wanted? It is of course in c but it pretty straightforward in what it does.
Im a scrub and use the online qmk editor to add all my FN layers (basically just cloning hhkb functions), could you share a hex or something so I can give it a try and see if its a keymap issue?
It's totally a mistake on my part, I actually already changed it on my local copy, but i haven't updated the repo yet. The last key on the split backspace is on it's own row, and I don't use one so I never tested the row. When he posted the json the other day I saw I was off by one.
In the qmk_firmware\keyboards\e6v2\config.h file just change:
#define MATRIX_COL_PINS { C7, C6, B5, B4, D7, D6, D4, F6, F7, F5, F4, F1, F0, B0, B1 }
to
#define MATRIX_COL_PINS { C7, C6, B5, B4, D7, D6, D4, F6, F7, F5, F4, F1, F0, B0, B2 }
I believe that's the only thing that's wrong. I also only tested the HHKB layout, so if you are using the non-hhkb one, lemme know if you have any issues with the extra keys.
If there are any weird layouts that have problems I can fix them. I wanna test a few more things before i try and merge it into the main repo, but I do plan to do it at some point with everything fixed.
Looks like no one saw my post.
Amnesias pinout was right, the one in the json was wrong.
Looks like no one saw my post.
Amnesias pinout was right, the one in the json was wrong.
Oh really? then i dunno why the last key wouldnt work, i guess id have to see the keymap. i know all the other rows work fine cause ive been using my board since i got it working :P.
Looks like no one saw my post.
Amnesias pinout was right, the one in the json was wrong.
Oh really? then i dunno why the last key wouldnt work, i guess id have to see the keymap. i know all the other rows work fine cause ive been using my board since i got it working :P.
Simon was using the online configurator with the incorrect pinout, that's why it didn't work.
Looks like no one saw my post.
Amnesias pinout was right, the one in the json was wrong.
Oh really? then i dunno why the last key wouldnt work, i guess id have to see the keymap. i know all the other rows work fine cause ive been using my board since i got it working :P.
Simon was using the online configurator with the incorrect pinout, that's why it didn't work.
Ohhh, derp i read it backwards. oooops
Woop! Mine arrived yesterday, picked it up today :) Thanks Exclusive. Packaging is ON POINT, box is sexy! Well done, very well done... Looks great. Can't wait to build it, zero cosmetic blemishes! Pics to follow.. This is worth the wait all! And even at that, hardly a wait compared to every other keyboard GB I have been a part of. You rock Exclusive!Show Image(https://scontent.fyyc4-1.fna.fbcdn.net/v/t35.0-12/26732987_10159935368415473_257822819_o.jpg?oh=8d298bcd3d852d74b3443129fba7fa19&oe=5A57B04A)
Woop! Mine arrived yesterday, picked it up today :) Thanks Exclusive. Packaging is ON POINT, box is sexy! Well done, very well done... Looks great. Can't wait to build it, zero cosmetic blemishes! Pics to follow.. This is worth the wait all! And even at that, hardly a wait compared to every other keyboard GB I have been a part of. You rock Exclusive!Show Image(https://scontent.fyyc4-1.fna.fbcdn.net/v/t35.0-12/26732987_10159935368415473_257822819_o.jpg?oh=8d298bcd3d852d74b3443129fba7fa19&oe=5A57B04A)
where did you get the plate?
Woop! Mine arrived yesterday, picked it up today :) Thanks Exclusive. Packaging is ON POINT, box is sexy! Well done, very well done... Looks great. Can't wait to build it, zero cosmetic blemishes! Pics to follow.. This is worth the wait all! And even at that, hardly a wait compared to every other keyboard GB I have been a part of. You rock Exclusive!Show Image(https://scontent.fyyc4-1.fna.fbcdn.net/v/t35.0-12/26732987_10159935368415473_257822819_o.jpg?oh=8d298bcd3d852d74b3443129fba7fa19&oe=5A57B04A)
where did you get the plate?
It was part of the GB, you must have just missed it. The choices were Aluminum in every color offered, Carbon Fiber, Poly Carbonate and Brass if I remember right. I got a few Aluminum ones and a brass one myself.
Available colors: Red, Black, Silver, Blue, Purple. Special color: White anodized and White micro-arc oxidation (These two colors are more expensive a little bit)
BRASS Middle case: +$35
BRASS Counterweight: +$25
BRASS Name Plate: +$5
CARBON FIBER Switches Plate: +$10
Woop! Mine arrived yesterday, picked it up today :) Thanks Exclusive. Packaging is ON POINT, box is sexy! Well done, very well done... Looks great. Can't wait to build it, zero cosmetic blemishes! Pics to follow.. This is worth the wait all! And even at that, hardly a wait compared to every other keyboard GB I have been a part of. You rock Exclusive!Show Image(https://scontent.fyyc4-1.fna.fbcdn.net/v/t35.0-12/26732987_10159935368415473_257822819_o.jpg?oh=8d298bcd3d852d74b3443129fba7fa19&oe=5A57B04A)
where did you get the plate?
It was part of the GB, you must have just missed it. The choices were Aluminum in every color offered, Carbon Fiber, Poly Carbonate and Brass if I remember right. I got a few Aluminum ones and a brass one myself.
No I dont
It saysQuoteAvailable colors: Red, Black, Silver, Blue, Purple. Special color: White anodized and White micro-arc oxidation (These two colors are more expensive a little bit)
no goldenQuoteBRASS Middle case: +$35
BRASS Counterweight: +$25
BRASS Name Plate: +$5
CARBON FIBER Switches Plate: +$10
no brass switch plate
I ordered mine with BRASS middle case together with BRASS name plate.
but received a red plate!
Woop! Mine arrived yesterday, picked it up today :) Thanks Exclusive. Packaging is ON POINT, box is sexy! Well done, very well done... Looks great. Can't wait to build it, zero cosmetic blemishes! Pics to follow.. This is worth the wait all! And even at that, hardly a wait compared to every other keyboard GB I have been a part of. You rock Exclusive!Show Image(https://scontent.fyyc4-1.fna.fbcdn.net/v/t35.0-12/26732987_10159935368415473_257822819_o.jpg?oh=8d298bcd3d852d74b3443129fba7fa19&oe=5A57B04A)
where did you get the plate?
It was part of the GB, you must have just missed it. The choices were Aluminum in every color offered, Carbon Fiber, Poly Carbonate and Brass if I remember right. I got a few Aluminum ones and a brass one myself.
No I dont
It saysQuoteAvailable colors: Red, Black, Silver, Blue, Purple. Special color: White anodized and White micro-arc oxidation (These two colors are more expensive a little bit)
no goldenQuoteBRASS Middle case: +$35
BRASS Counterweight: +$25
BRASS Name Plate: +$5
CARBON FIBER Switches Plate: +$10
no brass switch plate
I ordered mine with BRASS middle case together with BRASS name plate.
but received a red plate!
It originally wasn't an option. When exclusive reopened the group buy he added the brass option.
Woop! Mine arrived yesterday, picked it up today :) Thanks Exclusive. Packaging is ON POINT, box is sexy! Well done, very well done... Looks great. Can't wait to build it, zero cosmetic blemishes! Pics to follow.. This is worth the wait all! And even at that, hardly a wait compared to every other keyboard GB I have been a part of. You rock Exclusive!Show Image(https://scontent.fyyc4-1.fna.fbcdn.net/v/t35.0-12/26732987_10159935368415473_257822819_o.jpg?oh=8d298bcd3d852d74b3443129fba7fa19&oe=5A57B04A)
where did you get the plate?
It was part of the GB, you must have just missed it. The choices were Aluminum in every color offered, Carbon Fiber, Poly Carbonate and Brass if I remember right. I got a few Aluminum ones and a brass one myself.
No I dont
It saysQuoteAvailable colors: Red, Black, Silver, Blue, Purple. Special color: White anodized and White micro-arc oxidation (These two colors are more expensive a little bit)
no goldenQuoteBRASS Middle case: +$35
BRASS Counterweight: +$25
BRASS Name Plate: +$5
CARBON FIBER Switches Plate: +$10
no brass switch plate
I ordered mine with BRASS middle case together with BRASS name plate.
but received a red plate!
It originally wasn't an option. When exclusive reopened the group buy he added the brass option.
It isn't in the original list since exclusive didn't have permission to edit it.
Here is the new one
https://docs.google.com/spreadsheets/d/1UrUP8ufV3lFuJtnk6Bw2b3kcig6vGFWc6EE35jTFAQo/edit#gid=2052738676
hi guys
who has qmk pcb plz wait towelding
yeshi guys
who has qmk pcb plz wait towelding
Is there something wrong with it? I've already soldered mine together
hi guys
sorry for those .QMK pcb have many issue .it made by my friend who was first time do the qmk pcb
i am pretty feel sorry for that
we can see from this pic :https://i.imgur.com/Izeupy9.png (https://i.imgur.com/Izeupy9.png) switch line link to led so Q & A will trigger at same time .
that we need remove A`s resistance like that .https://i.imgur.com/uzUMtnE.png
btw,if u dont need led anything is okay .those guys who buy the qmk pcb ,next board pcb for free
if someone cant accept qmk pcb this issue plz let me know .i will give u bootmapper or remake qmk pcb .(it may cost my shipping fee and pcb costing :( )
i am really sorry .
Plz give me u json and hexhi guys
sorry for those .QMK pcb have many issue .it made by my friend who was first time do the qmk pcb
i am pretty feel sorry for that
we can see from this pic :https://i.imgur.com/Izeupy9.png (https://i.imgur.com/Izeupy9.png) switch line link to led so Q & A will trigger at same time .
that we need remove A`s resistance like that .https://i.imgur.com/uzUMtnE.png
btw,if u dont need led anything is okay .those guys who buy the qmk pcb ,next board pcb for free
if someone cant accept qmk pcb this issue plz let me know .i will give u bootmapper or remake qmk pcb .(it may cost my shipping fee and pcb costing :( )
i am really sorry .
What do you mean Q&A trigger together? I'm typing on my soldered board right now, and that doesn't happen to me. I do see the led trace issue, I never woulda noticed that through the mask lol, im guessing that's why the LEDs wont turn off? Cause it's the matrix scans are lighting them up?
Anyway, I can't speak for everyone, but I would love to get at least 2 of my pcbs replaced just so I could have 2 perfect ones at some point. I don't mind waiting until the next time you run PCBs or anything like that tho, and would probably even pay a bit for them. Given I got 4 pcbs so I'd have one for each plate, I don't think that's THAT unreasonable. But I also totally understand if you decide not to do it.
I just know I really like these boards, and would love for them to be "perfect".
Plz give me u json and hexhi guys
sorry for those .QMK pcb have many issue .it made by my friend who was first time do the qmk pcb
i am pretty feel sorry for that
we can see from this pic :https://i.imgur.com/Izeupy9.png (https://i.imgur.com/Izeupy9.png) switch line link to led so Q & A will trigger at same time .
that we need remove A`s resistance like that .https://i.imgur.com/uzUMtnE.png
btw,if u dont need led anything is okay .those guys who buy the qmk pcb ,next board pcb for free
if someone cant accept qmk pcb this issue plz let me know .i will give u bootmapper or remake qmk pcb .(it may cost my shipping fee and pcb costing :( )
i am really sorry .
What do you mean Q&A trigger together? I'm typing on my soldered board right now, and that doesn't happen to me. I do see the led trace issue, I never woulda noticed that through the mask lol, im guessing that's why the LEDs wont turn off? Cause it's the matrix scans are lighting them up?
Anyway, I can't speak for everyone, but I would love to get at least 2 of my pcbs replaced just so I could have 2 perfect ones at some point. I don't mind waiting until the next time you run PCBs or anything like that tho, and would probably even pay a bit for them. Given I got 4 pcbs so I'd have one for each plate, I don't think that's THAT unreasonable. But I also totally understand if you decide not to do it.
I just know I really like these boards, and would love for them to be "perfect".
new json https://www.dropbox.com/s/jvis70gfdp7z8or/e6v2.json?dl=0
standard hex https://www.dropbox.com/s/cu3mdkz3x44b7u7/stanard.hex?dl=0
new json https://www.dropbox.com/s/jvis70gfdp7z8or/e6v2.json?dl=0
standard hex https://www.dropbox.com/s/cu3mdkz3x44b7u7/stanard.hex?dl=0
I think that hex is still backwards. From what I've been told, the row from here is valid:
https://github.com/amnesia0287/qmk_firmware/blob/amnesia0287/keyboards/e6v2/config.h
#define MATRIX_COL_PINS { C7, C6, B5, B4, D7, D6, D4, F6, F7, F5, F4, F1, F0, B0, B1 }
Your json has: ["C7", "C6", "B5", "B4", "D7", "D6", "D4", "F6", "F7", "F5", "F4", "F1", "F0", "B0", "B2"],
I could be wrong since I don't use a split backspace, so I haven't tested it myself, but the people who used my repo to start with said it did.
also @exclusive, if you have any standard layouts you want me to put into github before i try and merge it into the official repo, just let me know. I'll happily add any layouts or keymaps you want. Eventually they will show up here: http://config.qmk.fm (this site IS NOT live yet, but the link WOULD be config.qmk.fm/#/e6v2/KEYMAP, it's just not there yet)Thanks for do those .actually i am not be familiar with pcb job :( if someone have some question plz assist them .thanks :thumb:
I setup 4 keymaps so far: https://github.com/amnesia0287/qmk_firmware/blob/amnesia0287/keyboards/e6v2/e6v2.h
the default which just maps all the keys,
an ansi one,
and then hhkb
and split bs hhkb layouts.
I use the hhkb one myself just so I don't have to fill out the blanks, my layout is here https://github.com/amnesia0287/qmk_firmware/blob/amnesia0287/keyboards/e6v2/keymaps/amnesia0287/keymap.c and looks like this:
[_BL] = KEYMAP_HHKB(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_HLb,
KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, FN_HLa
),
But like if you have a specific standard layout or w/e I can add them all.
I set the default to be a standard ansi layout, and then just setup some random stuff.
Also, if you do make another pcb and want it tested, let me know and I'll be glad to assist :D
Yep.next project will have block.and special middle. :thumb:
Any update on next project? E6-V1? :D
Yep.next project will have block.and special middle. :thumb:
Any update on next project? E6-V1? :D
Yep.next project will have block.and special middle. :thumb:
Any update on next project? E6-V1? :D
Special middle? Are you gonna try a gasket :O
All done :)pretty cool :thumb:Show Image(https://i.imgur.com/BpeSPJ9.jpg)
Next time
Special color
Next time
Special color
Next time
Special color
Next time
Special color
Got u.i will think thatNext time
Special color
Next time E2-V1 pls
Forget this colorNext time
Special color
WAIT WHATTTTTT
WAI YOU DO DIS!!!
Forget this colorNext time
Special color
WAIT WHATTTTTT
WAI YOU DO DIS!!!
Those special color will available in next gbForget this colorNext time
Special color
WAIT WHATTTTTT
WAI YOU DO DIS!!!
Thats a very nice looking green. Will there be a E8 r2 as well with some of these colors?
Forget this colorNext time
Special color
WAIT WHATTTTTT
WAI YOU DO DIS!!!
Guys when u solder board already
Plz post pic here I need you guys feedback
Appreciate it
Guys when u solder board already
Plz post pic here I need you guys feedback
Appreciate it ;)
I got it and will think twice ,thanks .Guys when u solder board already
Plz post pic here I need you guys feedback
Appreciate it ;)
First of all thank you Exclusive for coming through with overall smooth development and timely updates. Below are a few things I noticed which could be improved.
Quality is great. Feels very solid. My favorite HHKB so far! 8.5/10
That said IMHO there are a few things I like to point out maybe worth considering for better or worse:
(there are in no particular order, I'm just naming them as I go)
- The screw holes in the front bottom part could countersunk another 1-2mm so the entire screw would sit nice and flush when fully tight down
- Brass screws would have been better choice that goes better with the weight.
- I understand the screw under the name tag is different due to length but maybe it's something that could be avoid with minor redesign?
- The height of LED arcs on left and right side could raise another 5-6mm at least IMO because when I try to pick up the keyboard I would try to hold it on the sides and right now it's impossible
- Switch Plate having screw underside mount to the Top Plate before Top Plate having underside mount to the Bottom Plate would have been a better construction.
biggest hope is for higher LED arcs on the side that would be great.
my 2 cents :)
Guys when u solder board already
Plz post pic here I need you guys feedback
Appreciate it ;)
Thanks gaiden :thumb:
https://imgur.com/a/jJHmz#o6JYlf9
Thanks gaiden :thumb:
https://imgur.com/a/jJHmz#o6JYlf9
Hey, how'd he get his nameplate all nice and carved like that? My brass ones are like printed or something ;P
Standard E6v2 were engravingThanks gaiden :thumb:
https://imgur.com/a/jJHmz#o6JYlf9
Hey, how'd he get his nameplate all nice and carved like that? My brass ones are like printed or something ;P
My E6-V2 nameplates are all engraved, my custom tags are printed tho
Standard E6v2 were engravingThanks gaiden :thumb:
https://imgur.com/a/jJHmz#o6JYlf9
Hey, how'd he get his nameplate all nice and carved like that? My brass ones are like printed or something ;P
My E6-V2 nameplates are all engraved, my custom tags are printed tho
Customized were print coz so much customized
Yep ,next time I will all using printed it seems better than engraving.Standard E6v2 were engravingThanks gaiden :thumb:
https://imgur.com/a/jJHmz#o6JYlf9
Hey, how'd he get his nameplate all nice and carved like that? My brass ones are like printed or something ;P
My E6-V2 nameplates are all engraved, my custom tags are printed tho
Customized were print coz so much customized
I totally woulda ordered one if i had known that. I thought that one and the E-Team E6-V2 were standard. I totally woulda gotten 1-2 of those had I known they would look SOO much nicer. You should make stuff like that way more clear.
Yep ,next time I will all using printed it seems better than engraving.Standard E6v2 were engravingThanks gaiden :thumb:
https://imgur.com/a/jJHmz#o6JYlf9
Hey, how'd he get his nameplate all nice and carved like that? My brass ones are like printed or something ;P
My E6-V2 nameplates are all engraved, my custom tags are printed tho
Customized were print coz so much customized
I totally woulda ordered one if i had known that. I thought that one and the E-Team E6-V2 were standard. I totally woulda gotten 1-2 of those had I known they would look SOO much nicer. You should make stuff like that way more clear.
White letter looks really good
Yea ,standard was engraving it more easy .Yep ,next time I will all using printed it seems better than engraving.Standard E6v2 were engravingThanks gaiden :thumb:
https://imgur.com/a/jJHmz#o6JYlf9
Hey, how'd he get his nameplate all nice and carved like that? My brass ones are like printed or something ;P
My E6-V2 nameplates are all engraved, my custom tags are printed tho
Customized were print coz so much customized
I totally woulda ordered one if i had known that. I thought that one and the E-Team E6-V2 were standard. I totally woulda gotten 1-2 of those had I known they would look SOO much nicer. You should make stuff like that way more clear.
White letter looks really good
Ehh, I kinda hate the printing. I woulda pay extra to get nice engraved brass ones with custom stuff. Printing on brass just looks cheap to me. Carved or smooth is fine, like, i would love to carve brass and then fill with enamel or something. But I HATE that I can feel the printing on the brass ones. Enough I'm not sure I'll ever use them. That's why I wish I had ordered the carved brass one like in that photo. It looks much more high end than any of the others.
Yea ,standard was engraving it more easy .Yep ,next time I will all using printed it seems better than engraving.Standard E6v2 were engravingThanks gaiden :thumb:
https://imgur.com/a/jJHmz#o6JYlf9
Hey, how'd he get his nameplate all nice and carved like that? My brass ones are like printed or something ;P
My E6-V2 nameplates are all engraved, my custom tags are printed tho
Customized were print coz so much customized
I totally woulda ordered one if i had known that. I thought that one and the E-Team E6-V2 were standard. I totally woulda gotten 1-2 of those had I known they would look SOO much nicer. You should make stuff like that way more clear.
White letter looks really good
Ehh, I kinda hate the printing. I woulda pay extra to get nice engraved brass ones with custom stuff. Printing on brass just looks cheap to me. Carved or smooth is fine, like, i would love to carve brass and then fill with enamel or something. But I HATE that I can feel the printing on the brass ones. Enough I'm not sure I'll ever use them. That's why I wish I had ordered the carved brass one like in that photo. It looks much more high end than any of the others.
Customized was too much it impossible to engraving one by one .not because the money ,for factory is not necessarily
Next run is the standard engravingAdd option for "blanks" too if you can.
Customized was laser .
Yea ,standard was engraving it more easy .Yep ,next time I will all using printed it seems better than engraving.Standard E6v2 were engravingThanks gaiden :thumb:
https://imgur.com/a/jJHmz#o6JYlf9
Hey, how'd he get his nameplate all nice and carved like that? My brass ones are like printed or something ;P
My E6-V2 nameplates are all engraved, my custom tags are printed tho
Customized were print coz so much customized
I totally woulda ordered one if i had known that. I thought that one and the E-Team E6-V2 were standard. I totally woulda gotten 1-2 of those had I known they would look SOO much nicer. You should make stuff like that way more clear.
White letter looks really good
Ehh, I kinda hate the printing. I woulda pay extra to get nice engraved brass ones with custom stuff. Printing on brass just looks cheap to me. Carved or smooth is fine, like, i would love to carve brass and then fill with enamel or something. But I HATE that I can feel the printing on the brass ones. Enough I'm not sure I'll ever use them. That's why I wish I had ordered the carved brass one like in that photo. It looks much more high end than any of the others.
Customized was too much it impossible to engraving one by one .not because the money ,for factory is not necessarily
Fine ,about nameplate letter this things done .it will have a way solve next run
Just finished my build, I think it turned out well. Only two real things I would change next time; Brass weight screws and the nameplate mounting.
Also, that green is looking good exclusive!
https://imgur.com/a/dpDsm (https://imgur.com/a/dpDsm)
Next run is the standard engraving
Customized was laser .
Fine ,about nameplate letter this things done .it will have a way solve next run
Does that mean there will be a R2? :eek: :eek:
What about the E8-V1 TKL? I missed the GB :'( :'(
Next run is the standard engraving
Customized was laser .
E2-V1 plz Exclusive
(https://farm5.staticflickr.com/4759/39012327614_7950dff4bf_h.jpg) (https://flic.kr/p/22ronQb)Pretty nice. :thumb:
Very happy with the final product, as the the board is pretty much flawless.
Thank you exclusive!
Album: https://flic.kr/s/aHskrzu9E2
Take some pictures.
https://imgur.com/a/lf2xC
Take some pictures.
https://imgur.com/a/lf2xC
that dark blue is really nice
Take some pictures.
https://imgur.com/a/lf2xC
that dark blue is really nice
You may get one puddsy :)
Take some pictures.
https://imgur.com/a/lf2xC
that dark blue is really nice
You may get one puddsy :)
Take some pictures.dang, that looks insane. already thinking of next colors :thumb:
https://imgur.com/a/lf2xC
You may need rocket combo :DTake some pictures.dang, that looks insane. already thinking of next colors :thumb:
https://imgur.com/a/lf2xC
I see the google form for this is still open. Can these still be purchased?sry,it cant
Any idea of when next round will start?It may next month or early .
I'd love to see WKL option for the top plate next round.
Love your manufacturing quality exclusive. Any chance for slight design changes round 2? Would like a slightly more refined design. Perhaps get rid of middle piece and make weight go through bottom piece, like the X60. Or a weight in the back, like the evil80.Thank so you advise
Sent from my SM-G950U using Tapatalk
Love your manufacturing quality exclusive. Any chance for slight design changes round 2? Would like a slightly more refined design. Perhaps get rid of middle piece and make weight go through bottom piece, like the X60. Or a weight in the back, like the evil80.I don't think taking out the middle piece to make it look more like the other keyboards would be a good idea. Sure there are plenty of room for improvement but in small amount. We can't have every keyboard looking like x60 or evil80 there needs to be some separation in design otherwise why even bother making it? Unless its a faulty design, making dramatic changes would do more harm than good IMO.
Sent from my SM-G950U using Tapatalk
Love your manufacturing quality exclusive. Any chance for slight design changes round 2? Would like a slightly more refined design. Perhaps get rid of middle piece and make weight go through bottom piece, like the X60. Or a weight in the back, like the evil80.I don't think taking out the middle piece to make it look more like the other keyboards would be a good idea. Sure there are plenty of room for improvement but in small amount. We can't have every keyboard looking like x60 or evil80 there needs to be some separation in design otherwise why even bother making it? Unless its a faulty design, making dramatic changes would do more harm than good IMO.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G935F using Tapatalk
I'd love to see WKL option for the top plate next round.
When is the next round happening?Next month or later
When is the next round happening?Next month or later
Pink options for Round 2 would make this an instabuy for me
Pink options for Round 2 would make this an instabuy for meYep
It almost may same price ,a little change no worryWhen is the next round happening?Next month or later
Will the pricing be changing at all or should we be looking at about the same price for most options?
Ok, time to share :)Thanks you like this BoardShow Image(https://i.imgur.com/mXOeeZu.jpg)
Silver top & bottom, brass mid & plate, box dark yellows & 9009 with a brass Donut cable (& a brass Conklin Nighthawk on the way :p). I also swapped out the bumpons for some SJ5302 so it sits closer to the desk to show of the sexy curve better.Show Image(https://i.imgur.com/gu36ZiV.jpg)
I love this keyboard, it feels and sounds so solid. Amazing work Exclusive! I'm definitely on board with future projects :thumb:
There are some scuffs on the weight and a pretty good nick on the right side LED cutout but its pretty much flawless everywhere that's visible when sitting on my desk.Show Image(https://i.imgur.com/nbb6KNY.jpg)
Thank you Exclusive for running such a good buy! Finally finished my build, you can see the build log here: https://www.reddit.com/r/MechanicalKeyboards/comments/7sfyz8/lakers_e6v2/Thank my friend
my daily driveFor sureShow Image(https://i.imgur.com/796TG16.jpg)Show Image(https://i.imgur.com/UW6WMWh.jpg)
Chinese New Year is coming!
E-Team will try to have some new prototype before New Year and some GB next month :-)
I have a purple middle section (purple wasn't as dark as I hoped. Thankfully, I had bought another white one.Yea the purple is shiny not enough dark
So, I have a purple middle section if someone is looking to trade let me know :thumb:
orders picture :
https://imgur.com/a/hRNrU
This color is hard to take.
Mine:Show Image(https://i.imgur.com/0Mnpj73.jpg?1)Show Image(https://i.imgur.com/7wvvC0m.jpg)Show Image(https://i.imgur.com/vx1reN8.jpg)
Yes or noShow Image(https://i.imgur.com/iv7Jbfq.jpg)Show Image(https://i.imgur.com/HhpOBFr.jpg)
Some dirt on the brass plate and brass middle case and they can't be cleaned. But otherwise board is flawless. Thanks Exclusive!
Exclusive run out of middle case, so I got 2x everything except 1x middle case. So if anyone is willing to sell his to me not expecting to make big money out of it I'd be very appreciated
Mine:Show Image(https://i.imgur.com/0Mnpj73.jpg?1)Show Image(https://i.imgur.com/7wvvC0m.jpg)Show Image(https://i.imgur.com/vx1reN8.jpg)
Yes or noShow Image(https://i.imgur.com/iv7Jbfq.jpg)Show Image(https://i.imgur.com/HhpOBFr.jpg)
Some dirt on the brass plate and brass middle case and they can't be cleaned. But otherwise board is flawless. Thanks Exclusive!
Exclusive run out of middle case, so I got 2x everything except 1x middle case. So if anyone is willing to sell his to me not expecting to make big money out of it I'd be very appreciated
I might consider one of my extra midcase/plate sets. I'll have to think about it and I'll let you know.
Mine:Show Image(https://i.imgur.com/0Mnpj73.jpg?1)Show Image(https://i.imgur.com/7wvvC0m.jpg)Show Image(https://i.imgur.com/vx1reN8.jpg)
Yes or noShow Image(https://i.imgur.com/iv7Jbfq.jpg)Show Image(https://i.imgur.com/HhpOBFr.jpg)
Some dirt on the brass plate and brass middle case and they can't be cleaned. But otherwise board is flawless. Thanks Exclusive!
Exclusive run out of middle case, so I got 2x everything except 1x middle case. So if anyone is willing to sell his to me not expecting to make big money out of it I'd be very appreciated
Mine:Show Image(https://i.imgur.com/0Mnpj73.jpg?1)Show Image(https://i.imgur.com/7wvvC0m.jpg)Show Image(https://i.imgur.com/vx1reN8.jpg)
Yes or noShow Image(https://i.imgur.com/iv7Jbfq.jpg)Show Image(https://i.imgur.com/HhpOBFr.jpg)
Some dirt on the brass plate and brass middle case and they can't be cleaned. But otherwise board is flawless. Thanks Exclusive!
Exclusive run out of middle case, so I got 2x everything except 1x middle case. So if anyone is willing to sell his to me not expecting to make big money out of it I'd be very appreciated
Mine:Show Image(https://i.imgur.com/0Mnpj73.jpg?1)Show Image(https://i.imgur.com/7wvvC0m.jpg)Show Image(https://i.imgur.com/vx1reN8.jpg)
Yes or noShow Image(https://i.imgur.com/iv7Jbfq.jpg)Show Image(https://i.imgur.com/HhpOBFr.jpg)
Some dirt on the brass plate and brass middle case and they can't be cleaned. But otherwise board is flawless. Thanks Exclusive!
Exclusive run out of middle case, so I got 2x everything except 1x middle case. So if anyone is willing to sell his to me not expecting to make big money out of it I'd be very appreciated
Thanks for the offers guys but mine are left usb port. I guess most of you have the mid usb option. Sign....This is gonna be difficult
Mine:Show Image(https://i.imgur.com/0Mnpj73.jpg?1)Show Image(https://i.imgur.com/7wvvC0m.jpg)Show Image(https://i.imgur.com/vx1reN8.jpg)
Yes or noShow Image(https://i.imgur.com/iv7Jbfq.jpg)Show Image(https://i.imgur.com/HhpOBFr.jpg)
Some dirt on the brass plate and brass middle case and they can't be cleaned. But otherwise board is flawless. Thanks Exclusive!
Exclusive run out of middle case, so I got 2x everything except 1x middle case. So if anyone is willing to sell his to me not expecting to make big money out of it I'd be very appreciated
Thanks for the offers guys but mine are left usb port. I guess most of you have the mid usb option. Sign....This is gonna be difficult
Based on the spreadsheet, there are 4 extra left port midcases out there. Unforgivable has 2, Asbestosflaygon (reddit) has 1, pon10 has one. Gonna be tough.
Show Image(https://i.imgur.com/vijPHsy.jpg)
Big boss 👍
https://imgur.com/a/kw6ts
Show Image(https://i.imgur.com/vijPHsy.jpg)
Big boss 👍
https://imgur.com/a/kw6ts
I stated previously in this thread that I sold my spot to Oscar2177. He paid me through PayPal and sent the updated shipping information to Exclusive. Exclusive sent him the keyboard and DHL allegedly lost it upon its arrival to the place of delivery.
I found out that last part after attempting to buy a 10 dollar accent kit through PayPal and being notified that someone had made a refund claim for 500USD for "package not received". I asked Exclusive about it and he told me that Oscar had talked to DHL and that they could not find his package. I have received a tracking number proving its arrival.
Oscar knowingly purchased a *virtual group buy spot* and is trying to make me pay for *the physical product shipped from Exclusive to Oscar, and lost by DHL*.
I have filed a PayPal dispute with a full explanation and image proof, but I warn you to not get involved in trades with him in the future.
hi guys
R2 is coming
many people like this board i am very appreciate it . :thumb:
https://geekhack.org/index.php?topic=94054.0#top
thanks all
hi guys
R2 is coming
many people like this board i am very appreciate it . :thumb:
https://geekhack.org/index.php?topic=94054.0#top
thanks all
Man.. if I didn't get so screwed by jhoang, I'd go for R2 :'(
hi guys
R2 is coming
many people like this board i am very appreciate it . :thumb:
https://geekhack.org/index.php?topic=94054.0#top
thanks all
Man.. if I didn't get so screwed by jhoang, I'd go for R2 :'(
You didn't get your money back?
Doesn't PayPal have 6 months of protection?hi guys
R2 is coming
many people like this board i am very appreciate it . :thumb:
https://geekhack.org/index.php?topic=94054.0#top
thanks all
Man.. if I didn't get so screwed by jhoang, I'd go for R2 :'(
You didn't get your money back?
Long story lol, but kuang actually ended up helping me regarding the original E8-V1, but I had to do a chargeback on the E6. Then I also bought some extra stuff from jhoang (og gmk 9009, and some tuned switches), totaling several hundred $$. I never got any of it, and it is way past paypals 90-day policy. In total, I think I lost about $400 USD to jhoang.
Doesn't PayPal have 6 months of protection?hi guys
R2 is coming
many people like this board i am very appreciate it . :thumb:
https://geekhack.org/index.php?topic=94054.0#top
thanks all
Man.. if I didn't get so screwed by jhoang, I'd go for R2 :'(
You didn't get your money back?
Long story lol, but kuang actually ended up helping me regarding the original E8-V1, but I had to do a chargeback on the E6. Then I also bought some extra stuff from jhoang (og gmk 9009, and some tuned switches), totaling several hundred $$. I never got any of it, and it is way past paypals 90-day policy. In total, I think I lost about $400 USD to jhoang.
Edit: it's 180 days.
I am sorry for that also I can’t do anything of ithi guys
R2 is coming
many people like this board i am very appreciate it . :thumb:
https://geekhack.org/index.php?topic=94054.0#top
thanks all
Man.. if I didn't get so screwed by jhoang, I'd go for R2 :'(
I am sorry for that also I can’t do anything of ithi guys
R2 is coming
many people like this board i am very appreciate it . :thumb:
https://geekhack.org/index.php?topic=94054.0#top
thanks all
Man.. if I didn't get so screwed by jhoang, I'd go for R2 :'(
Never mind is okay ,you can buy it anytime you want :)
Looking for a brass mid if anyone has one for trade/sale.
I have an Apple White ( Silver ) and Purple both with matching name plates.
Managed to pick up one, on the aftermarkets. How do I put the board into DFU mode? CheersQMK pcb?
For some reason, the caps lock light won't turn off...any ideas? I have the QMK version A1(?)
For some reason, the caps lock light won't turn off...any ideas? I have the QMK version A1(?)
Is this the default layout? Have you flashed it yet?
Not the default layout, flashed a new layout on it on QMK Config with E6V2 LE. E6V2 and E6V2 OE wouldn't compile for some reason. On the default layout, I didn't have this issue, so it's definitely a FW issue.For some reason, the caps lock light won't turn off...any ideas? I have the QMK version A1(?)
Is this the default layout? Have you flashed it yet?
e6v2 on its own is a directory so that won't compile.
OE seems to work just fine compiling, perhaps you had a wrong keycode. Regardless, please do not flash OE firmware for the LE board.
Could you try flashing the default layout again and seeing if the issue persists.
Sent from my Pixel 2 XL using Tapatalk
Not the default layout, flashed a new layout on it on QMK Config with E6V2 LE. E6V2 and E6V2 OE wouldn't compile for some reason. On the default layout, I didn't have this issue, so it's definitely a FW issue.For some reason, the caps lock light won't turn off...any ideas? I have the QMK version A1(?)
Is this the default layout? Have you flashed it yet?
e6v2 on its own is a directory so that won't compile.
OE seems to work just fine compiling, perhaps you had a wrong keycode. Regardless, please do not flash OE firmware for the LE board.
Could you try flashing the default layout again and seeing if the issue persists.
Sent from my Pixel 2 XL using Tapatalk