Author Topic: RGB PAD  (Read 8609 times)

0 Members and 1 Guest are viewing this topic.

Offline FavOriteX

  • Thread Starter
  • Posts: 16
RGB PAD
« on: Thu, 07 July 2016, 03:50:22 »
I'm FavOriteX from china. This is my RGB keyboard project,For now pad is ready.
I have custom RGB backlight with PC driver.
I have some RGB backlight effect.




Offline Data

  • Posts: 2608
  • Location: Orlando, FL
Re: RGB PAD
« Reply #1 on: Thu, 07 July 2016, 06:55:33 »
Very nice.  That looks like the "top" of the PCB.  Is there anything on the bottom?

How are you controlling the LED color/brightness?

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #2 on: Thu, 07 July 2016, 20:36:36 »
Very nice.  That looks like the "top" of the PCB.  Is there anything on the bottom?

How are you controlling the LED color/brightness?

Yes, LED is top of the pcb.For now not have led on the bottom yet.
Controlling the LED color use PC software,The fourth photos.
« Last Edit: Thu, 07 July 2016, 20:43:36 by FavOriteX »

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #3 on: Thu, 07 July 2016, 20:47:29 »

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #4 on: Thu, 07 July 2016, 20:55:01 »

Offline Data

  • Posts: 2608
  • Location: Orlando, FL
Re: RGB PAD
« Reply #5 on: Thu, 07 July 2016, 21:02:54 »
Well I don't speak Chinese(?) but I enjoyed your videos.  Nice job on the PCB.

Offline stoic-lemon

  • Posts: 970
  • Location: Saitama, Japan
Re: RGB PAD
« Reply #6 on: Thu, 07 July 2016, 21:32:01 »
Cool project. It came out really nice. Did you make the case too? The software for programming is made by you too?

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #7 on: Thu, 07 July 2016, 21:38:28 »
Well I don't speak Chinese(?) but I enjoyed your videos.  Nice job on the PCB.

Thx,My English is not good.but I will try to create a english version videos.

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #8 on: Thu, 07 July 2016, 22:03:19 »
Cool project. It came out really nice. Did you make the case too? The software for programming is made by you too?

Yes, All thing is just by my self.Team spirit is not good in china...
« Last Edit: Thu, 07 July 2016, 22:35:41 by FavOriteX »

Offline HPE1000

  • Keycap Paparazzo
  • Posts: 2943
  • Location: Carolina Beach, NC
Re: RGB PAD
« Reply #9 on: Thu, 07 July 2016, 22:14:17 »
Really cool  :)

Is the case aluminum with a carbon fiber plate?

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #10 on: Thu, 07 July 2016, 22:33:38 »
Really cool  :)

Is the case aluminum with a carbon fiber plate?

Yes.

Offline stoic-lemon

  • Posts: 970
  • Location: Saitama, Japan
Re: RGB PAD
« Reply #11 on: Fri, 08 July 2016, 02:49:30 »
Cool project. It came out really nice. Did you make the case too? The software for programming is made by you too?

Yes, All thing is just by my self.Team spirit is not good in china...

Even more impressive. Hope we can see more projects from you in the future.

Offline kolec94

  • Posts: 111
Re: RGB PAD
« Reply #12 on: Fri, 08 July 2016, 07:42:07 »
what led controller are you using to run the led's?

kbparadise v60 blues

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #13 on: Sun, 10 July 2016, 22:09:12 »
what led controller are you using to run the led's?

using stm32 now

Offline kolec94

  • Posts: 111
Re: RGB PAD
« Reply #14 on: Tue, 12 July 2016, 09:21:41 »
what led controller are you using to run the led's?

using stm32 now
so a stm32 and ws2812 leds?

kbparadise v60 blues

Offline jchan94

  • Keyclack Inc
  • * Vendor
  • Posts: 1566
  • Location: Los Angeles
  • Please email jchan@keyclack.com. PMs are disabled
    • KeyClack
Re: RGB PAD
« Reply #15 on: Wed, 13 July 2016, 03:36:33 »
wow!

This looks amazing! I'd love to see more full cnc enclosures for this, or full PCB utilizing this.
Support Email: support@keyclack.com

Did you miss something from us?
- Sign up for our Mailing List: https://eepurl.com/coAJ5r

Offline xtrafrood

  • formerly csmertx
  • * Elevated Elder
  • Posts: 2715
  • Location: Gainesville, FL
  • wildling
Re: RGB PAD
« Reply #16 on: Wed, 13 July 2016, 11:34:01 »
Seems like a post that would do well in the Geekhack Media subsection of the forum. I'm a bit confused as to why it's posted in Making Stuff Together..

Nice pad regardless :)

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #17 on: Wed, 13 July 2016, 22:47:44 »
what led controller are you using to run the led's?

using stm32 now
so a stm32 and ws2812 leds?

No, Useing stm32 pwm control led. led is normal common anode RGB led.

Offline kolec94

  • Posts: 111
Re: RGB PAD
« Reply #18 on: Thu, 14 July 2016, 07:28:58 »
what led controller are you using to run the led's?

using stm32 now
so a stm32 and ws2812 leds?

No, Useing stm32 pwm control led. led is normal common anode RGB led.
o i need to look at how to do that

kbparadise v60 blues

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #19 on: Fri, 15 July 2016, 01:13:30 »
Now Left keyboard and Right keyboard is ready!!!



« Last Edit: Fri, 15 July 2016, 01:23:26 by FavOriteX »

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #20 on: Fri, 15 July 2016, 01:17:51 »
what led controller are you using to run the led's?

using stm32 now
so a stm32 and ws2812 leds?

No, Useing stm32 pwm control led. led is normal common anode RGB led.
o i need to look at how to do that

Speaking a bit complicated.Just use PWM,8050 and mos control led matrix.

Offline Data

  • Posts: 2608
  • Location: Orlando, FL
Re: RGB PAD
« Reply #21 on: Fri, 15 July 2016, 06:59:51 »
Now Left keyboard and Right keyboard is ready!!!
Show Image

Show Image

Show Image

Show Image


Awesome.  Reminds me of VE.A.   :thumb:

Offline ntw

  • Posts: 501
Re: RGB PAD
« Reply #22 on: Sat, 16 July 2016, 16:46:57 »
really awesome driver!! even comes with idle mode :thumb:
Wishlist: Hungrkey, Creamsicle Skullthulhu, MDMAver Skullthulhu, Goo, Taka

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #23 on: Sun, 17 July 2016, 10:05:09 »
Now Left keyboard and Right keyboard is ready!!!
Show Image

Show Image

Show Image

Show Image


Awesome.  Reminds me of VE.A.   :thumb:

Yes.I agree.Almost the same, except for RGB backlight

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #24 on: Mon, 18 July 2016, 03:09:26 »
https://drive.google.com/file/d/0B1g3FOgnaU1YQmRFOEQ0bi1FRTQ/view?usp=sharing
This is *.schdoc file edit with AD15,but I do not know whether it can be downloaded.Try it! and tell me. thx.

Offline xtrafrood

  • formerly csmertx
  • * Elevated Elder
  • Posts: 2715
  • Location: Gainesville, FL
  • wildling
Re: RGB PAD
« Reply #25 on: Mon, 18 July 2016, 07:03:25 »
https://drive.google.com/file/d/0B1g3FOgnaU1YQmRFOEQ0bi1FRTQ/view?usp=sharing
This is *.schdoc file edit with AD15,but I do not know whether it can be downloaded.Try it! and tell me. thx.

I obviously needed to convert the *.schdoc but I was able to download and load the schematic with Kicad without much fuss. My output is attached below, does it look ok? This is my first attempt at converting Altium files..

142702-0


Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #26 on: Tue, 19 July 2016, 23:01:05 »
https://drive.google.com/file/d/0B1g3FOgnaU1YQmRFOEQ0bi1FRTQ/view?usp=sharing
This is *.schdoc file edit with AD15,but I do not know whether it can be downloaded.Try it! and tell me. thx.

I obviously needed to convert the *.schdoc but I was able to download and load the schematic with Kicad without much fuss. My output is attached below, does it look ok? This is my first attempt at converting Altium files..

(Attachment Link)

Look right.but We recommend that you use AD

Offline xtrafrood

  • formerly csmertx
  • * Elevated Elder
  • Posts: 2715
  • Location: Gainesville, FL
  • wildling
Re: RGB PAD
« Reply #27 on: Wed, 20 July 2016, 06:38:29 »
https://drive.google.com/file/d/0B1g3FOgnaU1YQmRFOEQ0bi1FRTQ/view?usp=sharing
This is *.schdoc file edit with AD15,but I do not know whether it can be downloaded.Try it! and tell me. thx.

I obviously needed to convert the *.schdoc but I was able to download and load the schematic with Kicad without much fuss. My output is attached below, does it look ok? This is my first attempt at converting Altium files..

(Attachment Link)

Look right.but We recommend that you use AD

If I may ask, what is AD? (true newbie here :'()

Offline kolec94

  • Posts: 111
Re: RGB PAD
« Reply #28 on: Wed, 20 July 2016, 08:30:05 »
https://drive.google.com/file/d/0B1g3FOgnaU1YQmRFOEQ0bi1FRTQ/view?usp=sharing
This is *.schdoc file edit with AD15,but I do not know whether it can be downloaded.Try it! and tell me. thx.

I obviously needed to convert the *.schdoc but I was able to download and load the schematic with Kicad without much fuss. My output is attached below, does it look ok? This is my first attempt at converting Altium files..

(Attachment Link)

Look right.but We recommend that you use AD

If I may ask, what is AD? (true newbie here :'()
Altium Designer

kbparadise v60 blues

Offline xtrafrood

  • formerly csmertx
  • * Elevated Elder
  • Posts: 2715
  • Location: Gainesville, FL
  • wildling
Re: RGB PAD
« Reply #29 on: Wed, 20 July 2016, 09:31:53 »
https://drive.google.com/file/d/0B1g3FOgnaU1YQmRFOEQ0bi1FRTQ/view?usp=sharing
This is *.schdoc file edit with AD15,but I do not know whether it can be downloaded.Try it! and tell me. thx.

I obviously needed to convert the *.schdoc but I was able to download and load the schematic with Kicad without much fuss. My output is attached below, does it look ok? This is my first attempt at converting Altium files..

(Attachment Link)

Look right.but We recommend that you use AD

If I may ask, what is AD? (true newbie here :'()
Altium Designer

Ah, I see. That $5k+ price point is a little rich for my wallet :eek:
Thank you

Offline CPTBadAss

  • Woke up like this
  • Posts: 14363
    • Tactile Zine
Re: RGB PAD
« Reply #30 on: Wed, 20 July 2016, 09:34:32 »
Really digging the pad and that split board. Always great to see new custom stuff :D.

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD and Keyboard
« Reply #31 on: Fri, 22 July 2016, 02:52:15 »
I'm FavOriteX from china. This is my RGB keyboard project,For now pad is ready.
I have custom RGB backlight with PC driver.
I have some RGB backlight effect.
Show Image

Show Image

Show Image

Show Image


Offline kolec94

  • Posts: 111
Re: RGB PAD
« Reply #32 on: Sun, 31 July 2016, 16:30:54 »
any idea on retail price or when/ if it will be a available?

kbparadise v60 blues

Offline FavOriteX

  • Thread Starter
  • Posts: 16
Re: RGB PAD
« Reply #33 on: Wed, 03 August 2016, 04:41:16 »
any idea on retail price or when/ if it will be a available?

I don't konw. if someone make it. I will Technical support him.I personally will not create.

Offline alkozu

  • Posts: 17
Re: RGB PAD
« Reply #34 on: Wed, 03 August 2016, 14:41:44 »
https://drive.google.com/file/d/0B1g3FOgnaU1YQmRFOEQ0bi1FRTQ/view?usp=sharing
This is *.schdoc file edit with AD15,but I do not know whether it can be downloaded.Try it! and tell me. thx.

I obviously needed to convert the *.schdoc but I was able to download and load the schematic with Kicad without much fuss. My output is attached below, does it look ok? This is my first attempt at converting Altium files..

(Attachment Link)

Look right.but We recommend that you use AD

If I may ask, what is AD? (true newbie here :'()
Altium Designer

Ah, I see. That $5k+ price point is a little rich for my wallet :eek:
Thank you

There is a free Altium viewer which might be enough if you don't want to tweak the design
http://techdocs.altium.com/display/ADOH/Altium+Designer+Viewer