[GB]CAMP C225 80% and CAMP PAD Custom Aluminum Keyboard

[Vadurr]

Does this board support split backspace?

Neither plate shown in the OP do, so I doubt it. Looks like you can only alter the bottom row, caps lock, and right shift.

Ahh I figured. Thanks!

[mkarlsson]

Hey SuperVan / just, I filled up the form on the 19th, when should I get my invoice?

Thanks!


Enviado desde mi iPhone utilizando Tapatalk

[SuperVan]

Does this board support split backspace?

No.

[SuperVan]

Hey SuperVan / just, I filled up the form on the 19th, when should I get my invoice?

Thanks!


Enviado desde mi iPhone utilizando Tapatalk

Don't worry about that. You will get your invoice soon.

[mkarlsson]

Hey SuperVan / just, I filled up the form on the 19th, when should I get my invoice?

Thanks!


Enviado desde mi iPhone utilizando Tapatalk

Don't worry about that. You will get your invoice soon.

Great, thanks for the info!


Enviado desde mi iPhone utilizando Tapatalk

[mkarlsson]

Hey SuperVan / just, I filled up the form on the 19th, when should I get my invoice?

Thanks!


Enviado desde mi iPhone utilizando Tapatalk

Don't worry about that. You will get your invoice soon.

Great, thanks for the info!


Enviado desde mi iPhone utilizando Tapatalk

Got the invoice, it says Titanium+silver+wkl, did you see the note about the CF plate?

Thanks a lot.

[techfresh]

Is there an MOQ?  Also when will the spreadsheet for order status be published?  I am also worried about there not being enough interest in this board.  I think it looks great and hope it goes through.

I wish it was a little heavier like 2.2kg. There are 60%'s that are heavier like the fjell and x60.  How thick is the brass plate?  Is 6063 a lighter aluminum than 6061?  I'm just wondering why this case is so much lighter than other TKLs.

Any response on why this only weighs 1.8kg?  The brass weight looks somewhat thick so not sure if it means the base of the case is not very thick.


Sent from my iPhone using Tapatalk

[just]

Hey SuperVan / just, I filled up the form on the 19th, when should I get my invoice?

Thanks!


Enviado desde mi iPhone utilizando Tapatalk

Don't worry about that. You will get your invoice soon.

Great, thanks for the info!


Enviado desde mi iPhone utilizando Tapatalk

Got the invoice, it says Titanium+silver+wkl, did you see the note about the CF plate?

Thanks a lot.

supervan will pm you

[xondat]

Is there an MOQ?  Also when will the spreadsheet for order status be published?  I am also worried about there not being enough interest in this board.  I think it looks great and hope it goes through.

I wish it was a little heavier like 2.2kg. There are 60%'s that are heavier like the fjell and x60.  How thick is the brass plate?  Is 6063 a lighter aluminum than 6061?  I'm just wondering why this case is so much lighter than other TKLs.

Any response on why this only weighs 1.8kg?  The brass weight looks somewhat thick so not sure if it means the base of the case is not very thick.


Sent from my iPhone using Tapatalk

The weight is pretty small; you can see the thickness here:



Maybe 3-4mm?

6063 and 6061 are the same density (2.7g/cm3, brass is about 8.5g/cm3).

[DALExSNAIL]

Is there an MOQ?  Also when will the spreadsheet for order status be published?  I am also worried about there not being enough interest in this board.  I think it looks great and hope it goes through.

I wish it was a little heavier like 2.2kg. There are 60%'s that are heavier like the fjell and x60.  How thick is the brass plate?  Is 6063 a lighter aluminum than 6061?  I'm just wondering why this case is so much lighter than other TKLs.

Any response on why this only weighs 1.8kg?  The brass weight looks somewhat thick so not sure if it means the base of the case is not very thick.


Sent from my iPhone using Tapatalk

The weight is pretty small; you can see the thickness here:

Show Image

Maybe 3-4mm?

6063 and 6061 are the same density (2.7g/cm3, brass is about 8.5g/cm3).

The only thing I think i would change on this would be a weight that went all the way through, for maximum t h i c c

[Softkore]

Which one is the blue gray? The photos are confusing for me. I'm having a hard time choosing color, can we get a more clear picture of the blue gray?

[Puddsy]

Which one is the blue gray? The photos are confusing for me. I'm having a hard time choosing color, can we get a more clear picture of the blue gray?

[Softkore]

Which one is the blue gray? The photos are confusing for me. I'm having a hard time choosing color, can we get a more clear picture of the blue gray?

Show Image

Thank you very much!!

Sent from my Pixel using Tapatalk

[strigif0rm3s]

Just ordered the blue/gray. Omg gorgeous. Only cherry type switches compatible? Kaihl, cherry, zelios?

Sent from my Nexus 6P using Tapatalk

[Oblotzky]

Btw will I be able to change the address later on? Looks like I'll be moving before the boards ship

[Puddsy]

Just ordered the blue/gray. Omg gorgeous. Only cherry type switches compatible? Kaihl, cherry, zelios?

Sent from my Nexus 6P using Tapatalk

correct

[beerafffe1]

I am new to the whole custom keyboard area, so please help a newbie out. I built my first keyboard recently and fried the first PCB, so I was wondering

• If extra PCBs are an option without getting a plate
• Will other TKL PCBs fit in the case? If yes, which ones?

Thanks for your help, this Blue-Grey option looks so nice I am going to get my first custom.

[LiQuiDs]

can you guys upload MAO Black color C225 please? i want to see it what is different to just Black?
also i ask you guys Is the red color of the picture the color of the actual keyboard? same hot red?

[Cyllinus]

can you guys upload MAO Black color C225 please? i want to see it what is different to just Black?
also i ask you guys Is the red color of the picture the color of the actual keyboard? same hot red?

I would also like to see MAO in black.

[SuperVan]

I am new to the whole custom keyboard area, so please help a newbie out. I built my first keyboard recently and fried the first PCB, so I was wondering

• If extra PCBs are an option without getting a plate
• Will other TKL PCBs fit in the case? If yes, which ones?

Thanks for your help, this Blue-Grey option looks so nice I am going to get my first custom.

1. You can leave a note. 2. No.

[SuperVan]

can you guys upload MAO Black color C225 please? i want to see it what is different to just Black?
also i ask you guys Is the red color of the picture the color of the actual keyboard? same hot red?

I will update later.

[beerafffe1]

I am new to the whole custom keyboard area, so please help a newbie out. I built my first keyboard recently and fried the first PCB, so I was wondering

• If extra PCBs are an option without getting a plate
• Will other TKL PCBs fit in the case? If yes, which ones?

Thanks for your help, this Blue-Grey option looks so nice I am going to get my first custom.

1. You can leave a note. 2. No.

Thanks! Submitted my response and Camp is going to be my first custom!

[SuperVan]

I am new to the whole custom keyboard area, so please help a newbie out. I built my first keyboard recently and fried the first PCB, so I was wondering

• If extra PCBs are an option without getting a plate
• Will other TKL PCBs fit in the case? If yes, which ones?

Thanks for your help, this Blue-Grey option looks so nice I am going to get my first custom.

1. You can leave a note. 2. No.

Thanks! Submitted my response and Camp is going to be my first custom!

Thanks for your support.

[Softkore]

Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.

Sent from my Pixel using Tapatalk

[Puddsy]

Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.

Sent from my Pixel using Tapatalk

if you look at the picture, you can see that it supports that setup

[Softkore]

Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.

Sent from my Pixel using Tapatalk

if you look at the picture, you can see that it supports that setup

Sorry, I'm still new and not really experienced enough to easily tell from looking at the PCB :/

[Puddsy]

Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.

Sent from my Pixel using Tapatalk

if you look at the picture, you can see that it supports that setup

Sorry, I'm still new and not really experienced enough to easily tell from looking at the PCB :/

no worries, we all start somewhere

you can tell because there are 3 centered holes in the PCB under the longer plate holes

if there was only 1, then it would not support all 1u

and the plate is the right shape for it as well, but that's a more complicated issue

[Softkore]

Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.

Sent from my Pixel using Tapatalk

if you look at the picture, you can see that it supports that setup

Sorry, I'm still new and not really experienced enough to easily tell from looking at the PCB :/

no worries, we all start somewhere

you can tell because there are 3 centered holes in the PCB under the longer plate holes

if there was only 1, then it would not support all 1u

and the plate is the right shape for it as well, but that's a more complicated issue

Thanks very much - I thought the plate looked right, but wasn't sure about the PCB. Now I know :B

[Puddsy]

Would the Camp Pad support splitting the 2u keys, like 0 and +? I'd rather have all 1u keys.

Sent from my Pixel using Tapatalk

if you look at the picture, you can see that it supports that setup

Sorry, I'm still new and not really experienced enough to easily tell from looking at the PCB :/

no worries, we all start somewhere

you can tell because there are 3 centered holes in the PCB under the longer plate holes

if there was only 1, then it would not support all 1u

and the plate is the right shape for it as well, but that's a more complicated issue

Thanks very much - I thought the plate looked right, but wasn't sure about the PCB. Now I know :B

 

[9999hp]

That's a beautiful keyboard

[strigif0rm3s]

Im in and paid. the low post count by OP is a bit alarming......
this is legit right? LOL

[Puddsy]

Im in and paid. the low post count by OP is a bit alarming......
this is legit right? LOL

it's already run twice in china, to good reception

[laughatpain]

Im in and paid. the low post count by OP is a bit alarming......
this is legit right? LOL

it's already run twice in china, to good reception

Post count too high, must be a **** poster. Don't listen to anything he says.
JK

Actually though, CAMP is legit. Baby blue looks great.

[Bits]

It took a bit longer to pay than I thought, but paid my invoice for my WKL+Pad! In it for real now

Sent from my ONEPLUS A3000 using Tapatalk

[Pell99]

What is the weight of the C225?

[strigif0rm3s]

Im in and paid. the low post count by OP is a bit alarming......
this is legit right? LOL

it's already run twice in china, to good reception

That's what I thought. Just making sure. Thanks all. Super excited. First real custom.

Sent from my Nexus 6P using Tapatalk

[Puddsy]

What is the weight of the C225?

1.8kg

[LiQuiDs]

Any pictures of the MAO black?

We will update later.

please upload MAO Black pictures!!! i want to see and decide color!!

[DALExSNAIL]

Any pictures of the MAO black?

We will update later.

please upload MAO Black pictures!!! i want to see and decide color!!

Dude, it's just gonna be a flat black

[just]

Any pictures of the MAO black?

We will update later.

please upload MAO Black pictures!!! i want to see and decide color!!

Dude, it's just gonna be a flat black

most like that,but white(mao) is special,it is not pure white

[Helldrop]

I ordered one two days ago, but haven't received the invoice yet. Please send it to me.

[wukong_bot]

Is there a way to change the color after we order? I'm not sure what color I want to get, but I want to join before the groupbuy ends. If you could show some pictures of MAO black and white this would help out a lot

[wise_star]

I ordered one two days ago, but haven't received the invoice yet. Please send it to me.

Yea same here. Gonna be sad if I don't see one before the groupbuy ends.

Sent from my SM-N950U using Tapatalk

[just]

Is there a way to change the color after we order? I'm not sure what color I want to get, but I want to join before the groupbuy ends. If you could show some pictures of MAO black and white this would help out a lot

Don't worry，we will give you  new pictures later

[just]

I ordered one two days ago, but haven't received the invoice yet. Please send it to me.

I send it to you  on  23rd September ，but I don't know why it  cancelled

[beerafffe1]

I am in the same boat, no invoice yet. But I submitted my form just last week though.

[Helldrop]

I ordered one two days ago, but haven't received the invoice yet. Please send it to me.

I send it to you  on  23rd September ，but I don't know why it  cancelled

I'm not sure, but might have deleted it by mistake or written a wrong email....
Anyway, thank you for sending the invoice to me again.

[Cyllinus]

I filled out a form twice for a black case and received an invoice for titanium both times. Am I missing something?

Can I pay for titanium then change my color to black?

[wise_star]

I just put in for one yesterday. Are invoices still going out? Worried I missed it since it's only a couple days till it ends haha.

Sent from my SM-N950U using Tapatalk

[strigif0rm3s]

Was thinking about making my first zelios with this board......65g

Sent from my Nexus 6P using Tapatalk