Author Topic: Acrylic Tenkeyless Keyboard Cases (Read 30438 times)

litster · « **on:** Wed, 11 January 2012, 13:37:35 »

Edit: if you are interested in joining a group buy for a acrylic case that fits a Filco tenkeyless keyboard for around $165 shipped CONUS, PM me.

I just realized that I have been hiding my acrylic keyboard cases in the Phantom group buy keyboard thread.

Here are a few pictures of the different acrylic keyboard cases I have made so far.

edit: added black+red case picture

sordna · « **Reply #1 on:** Wed, 11 January 2012, 13:46:02 »

Can you build a split one for a Kinesis Advantage ?

litster · « **Reply #2 on:** Wed, 11 January 2012, 13:50:37 »

I have a Advantage right in front of me. It would be very difficult to do it with lasercut acrylic because of the curves the Advantage has. Lasercutting can only cut in 2 dimensions and the acrylic thickness is the 3rd dimension. That 3rd dimension can only be straight.

aoya · « **Reply #3 on:** Wed, 11 January 2012, 13:58:52 »

Wow, these are incredibly cool. Do you have the tools to make one for a Leopold TKL? Alternatively, with metal?

You should consider doing a gb for these things, they are nice!

jwaz · « **Reply #4 on:** Wed, 11 January 2012, 14:03:12 »

Love that last one Litster!

I want to do the phantom but not sure if i can afford it

enoy21 · « **Reply #5 on:** Wed, 11 January 2012, 15:13:34 »

Those are super nice I love the top one with the white and blue trim. I don't suppose that blue trim is LED or better yet Neon gas filled is it ?

SmallFry · « **Reply #6 on:** Wed, 11 January 2012, 15:16:03 »

VERY good work lister!:smile: Indeed it is a pity that the darn things are so expensive...

GeorgeStorm · « **Reply #7 on:** Wed, 11 January 2012, 15:25:50 »

Love the white and blue

litster · « **Reply #8 on:** Wed, 11 January 2012, 15:45:46 »

Quote from: enoy21;488153

Those are super nice I love the top one with the white and blue trim. I don't suppose that blue trim is LED or better yet Neon gas filled is it ?

It is transparent blue acrylic. I have also done transparent orange with black (not shown), but it isn't as good looking.

Quote from: GeorgeStorm;488161

Love the white and blue

Quote from: harrison;488127

the black+blue and clear are absolutely incredible. it's a pitty they're so costly to cut.

I like white with transparent blue accent the best. But the black top works with both black and white keycaps, whereas white top works better with black keycaps IMO. I could do two color schemes, opaque white/transparent blue, and opaque black/opaque red, then you could swap the colors. Or I can do full opaque white and opaque black and you can make zebra scheme for both cases.

Quote from: aoya;488116

Wow, these are incredibly cool. Do you have the tools to make one for a Leopold TKL? Alternatively, with metal?

No, I don't have a Leopold. It was hard enough to try to make the case work for both Filco and Phantom. They are supposed to be the same, but there are minor differences.

Quote from: aoya;488116

You should consider doing a gb for these things, they are nice!

Quote from: SmallFry;488156

VERY good work lister!:smile: Indeed it is a pity that the darn things are so expensive...

There are indeed expensive. I could do a group buy. But I did some math, it would be about $165 including material, setup fees, laser time, all the hardware to put the case together, and shipping within the USA. I don't know if it is worth it...

mmmty · « **Reply #9 on:** Wed, 11 January 2012, 15:49:29 »

I want it. Put me on the list. I'm #1.

enoy21 · « **Reply #10 on:** Wed, 11 January 2012, 15:49:42 »

I recently started fiddling with some wood working and this gives me an idea of some nice wooden cases. I love your idea of the transparent acrylic between the upper and lower which would help alleviate the curvature issue.

mmmty · « **Reply #11 on:** Wed, 11 January 2012, 18:14:57 »

Payment sent!! :becky:

whiskerBox · « **Reply #12 on:** Wed, 11 January 2012, 18:39:10 »

I still really like the clear on the bet so far! Anyways I am glad to see that Filco compatibility is still a go. Nice work Litster can't wait for the GB

GeorgeStorm · « **Reply #13 on:** Wed, 11 January 2012, 18:48:17 »

Would love one, but sadly just too pricey for me

litster · « **Reply #14 on:** Wed, 11 January 2012, 19:09:44 »

PM me if you are interested in getting one. If there is enough interests, I might do a group buy.

maoiste · « **Reply #15 on:** Wed, 11 January 2012, 19:17:29 »

What are you referring to when you say "one". Is it just the acryl case or a phantom acryl case bundle and what pricerange are we talking about if a group buy for one would indeed happen ?

Also, very nice pictures.

demik · « **Reply #16 on:** Wed, 11 January 2012, 19:44:20 »

would love a white and red one similar to the white and blue one

litster · « **Reply #17 on:** Wed, 11 January 2012, 19:49:46 »

I mean if you are interested in getting one acrylic case for $165, PM me.

whiskerBox · « **Reply #18 on:** Wed, 11 January 2012, 22:32:17 »

[ Attachment Invalid Or Does Not Exist ] 37301[/ATTACH]

can I get one this color?? hideous right, but perfect!

litster · « **Reply #19 on:** Wed, 11 January 2012, 22:56:36 »

Quote from: whiskerBox;488409

(Attachment Link) 37301[/ATTACH]

can I get one this color?? hideous right, but perfect!

LOL! Probably not. It will either be white/blue or black/blue. I can't even find red arcylic at the right thickness. Any color outside of black and white, there are only 1 or 2 thicknesses to choose from and most often they are not at the thickness I need. Sorry.

whiskerBox · « **Reply #20 on:** Wed, 11 January 2012, 22:58:33 »

Thats a shame

I am not really a fan of either of those color combos to be honest.

noodles256 · « **Reply #21 on:** Wed, 11 January 2012, 22:58:48 »

litster is becoming one good keyboard-er

litster · « **Reply #22 on:** Wed, 11 January 2012, 23:01:17 »

Quote from: noodles256;488425

litster is becoming one good keyboard-er

But I can't satisfy the whiskerBoxer!

whiskerBox · « **Reply #23 on:** Wed, 11 January 2012, 23:03:05 »

The whiskerBoxer will still probably buy one of your dumb colored cases!

mmmty · « **Reply #24 on:** Wed, 11 January 2012, 23:17:05 »

Can I get mine in orange/green?

demik · « **Reply #25 on:** Wed, 11 January 2012, 23:20:06 »

in for carolina blue and hot pink.

litster · « **Reply #26 on:** Wed, 11 January 2012, 23:21:01 »

I could do custom color if cut them all myself, but I can't, because I can't cut them all myself. Because of that, doing one-off colors would be even more expensive.

litster · « **Reply #27 on:** Wed, 11 January 2012, 23:22:13 »

Quote from: whiskerBox;488428

The whiskerBoxer will still probably buy one of your dumb colored cases!

I love you for that! My whiskerBoxer!

demik · « **Reply #28 on:** Wed, 11 January 2012, 23:22:35 »

i'm just messing =p

im fine with black/white, white/black.

do you have a set date for this? i just spent a ton of money so im looking to buy towards the end of the month o.O

mkawa · « **Reply #29 on:** Wed, 11 January 2012, 23:25:03 »

awesome! bit pricey for me though -- for not much more than that one could probably have a similar design done in aluminum...

litster · « **Reply #30 on:** Wed, 11 January 2012, 23:47:06 »

Quote from: demik;488438

i'm just messing =p

im fine with black/white, white/black.

do you have a set date for this? i just spent a ton of money so im looking to buy towards the end of the month o.O

You've got time. It will be at least the end of this month.

litster · « **Reply #31 on:** Wed, 11 January 2012, 23:48:09 »

Quote from: mkawa;488442

awesome! bit pricey for me though -- for not much more than that one could probably have a similar design done in aluminum...

Very true. I will pay you $250 if you can ship me an aluminum case to put one of my Filcos in.

DanGWanG · « **Reply #32 on:** Thu, 12 January 2012, 00:30:11 »

Can you make one with black and red?

litster · « **Reply #33 on:** Thu, 12 January 2012, 00:55:37 »

Transparent red, possibly. Opaque red, no. And transparent red would be more expensive. Like I said, I can't do one-offs. For a group buy to work, all will need to be in the same color combo, unless we have a huge demand to support multiple color schemes.

DanGWanG · « **Reply #34 on:** Thu, 12 January 2012, 01:38:14 »

Create a member poll

and lets vote, produce,

, profit!

litster · « **Reply #35 on:** Thu, 12 January 2012, 01:41:27 »

Hehe, maybe when we have more people joining the group.

TheProfosist · « **Reply #36 on:** Sat, 14 January 2012, 04:00:42 »

Thats cheaper than i was expecting actually. I will now have to inform the people im building for of the cost.

Msan · « **Reply #37 on:** Sat, 14 January 2012, 09:39:03 »

I am very interested. Is there any black + black left?

litster · « **Reply #38 on:** Mon, 23 January 2012, 16:23:39 »

I think I have enough for a minimum number needed for the first batch. Please consider this is closed. Will send more info later.

hazeluff · « **Reply #39 on:** Mon, 23 January 2012, 17:51:51 »

They look so nice, but the cost is really high = (. I used to have like a "craft" class, and remembering paying only like 20-30 bucks for 2-3 A3 sized sheets of 9mm thick acrylic.

litster · « **Reply #40 on:** Mon, 23 January 2012, 17:54:06 »

yep, acrylic is not that expensive, cutting it is. A sheet of acrylic doesn't make a case.

hazeluff · « **Reply #41 on:** Mon, 23 January 2012, 17:55:46 »

Quote from: litster;497138

yep, acrylic is not that expensive, cutting it is. A sheet of acrylic doesn't make a case.

Damn the lazer cutter.

Yeah, my school had one...spent so much time making random stuff with it. I should invest in one and like cut stuff for you guys. Only if I had money...time to buy the lottery?

digitalleftovers · « **Reply #42 on:** Wed, 25 January 2012, 13:43:38 »

Quote from: hazeluff;497140

Damn the lazer cutter.

Yeah, my school had one...spent so much time making random stuff with it. I should invest in one and like cut stuff for you guys. Only if I had money...time to buy the lottery?

I thought the same thing. I probably won't be taking the plunge any time soon, but its worth noting that some of these are less than people spend on their gaming rigs. This company (full spectrum lasers) touts that you can do small production work with some of their less expensive models. Reviews of the table top models indicate that consistent calibration is the biggest concern, and probably why you would want the more expensive ones. But still, you could have one of these AND a 3D printer for less than 4K. Thats pretty awesome.

http://fslaser.com/products/lasers

hazeluff · « **Reply #43 on:** Wed, 25 January 2012, 14:07:34 »

Quote from: digitalleftovers;498822

I thought the same thing. I probably won't be taking the plunge any time soon, but its worth noting that some of these are less than people spend on their gaming rigs. This company (full spectrum lasers) touts that you can do small production work with some of their less expensive models. Reviews of the table top models indicate that consistent calibration is the biggest concern, and probably why you would want the more expensive ones. But still, you could have one of these AND a 3D printer for less than 4K. Thats pretty awesome.

http://fslaser.com/products/lasers

You mean lazer cutter yeah? Hmm that cheapest model they have is like just wide enough to work with a sheet of acrylic for a TKL.

3D printers are cheaper. I might take the plunge for one at some point. Printerbot/Makerbot. = / still like $1K for one tho.

Shogunner · « **Reply #44 on:** Wed, 25 January 2012, 14:12:36 »

Man, having once of these keyboard roofs would be fantastic. I've been looking around and can't find any that would work with my new WASD though. I may just be blind.

It's dimensions are about 44.1cm wide, 20.7cm long, and 5.1cm in height w/ the wrist rest on.

Any suggestions?

TheProfosist · « **Reply #45 on:** Wed, 25 January 2012, 14:14:05 »

EK has fullsize keyboard roofs

pitashen · « **Reply #46 on:** Sat, 28 January 2012, 15:15:01 »

I would really like to own one in black instead of white.

Gawkbasher · « **Reply #47 on:** Sat, 28 January 2012, 15:42:01 »

I'm thinking that somebody motivated enough to buy a Laser Cutter could make some good money on this forum.

Anyhow, I've found some shops that will aggressively price laser cutting services. Litster, do you mind if I inquire about the cost per minute of cutting time with the shop you're using?

I might be able to recommend an alternative, depending or I might want to know who you're using so I can use them too on other projects

tsangan · « **Reply #48 on:** Sat, 28 January 2012, 15:43:46 »

Quote from: hazeluff;498848

You mean lazer cutter yeah? Hmm that cheapest model they have is like just wide enough to work with a sheet of acrylic for a TKL.

3D printers are cheaper. I might take the plunge for one at some point. Printerbot/Makerbot. = / still like $1K for one tho.

Makerbot is so damn cool, I almost plunged to just to get one, you see the small cupcakes and the companion cubes they made?

Gawkbasher · « **Reply #49 on:** Sat, 28 January 2012, 15:45:10 »

Quote from: Shogunner;498852

Man, having once of these keyboard roofs would be fantastic. I've been looking around and can't find any that would work with my new WASD though. I may just be blind.

It's dimensions are about 44.1cm wide, 20.7cm long, and 5.1cm in height w/ the wrist rest on.

Any suggestions?

Did you see this thread? http://geekhack.org/showthread.php?25786-Looking-for-a-keyboard-roof-maybe-make-one&highlight=roof

hazeluff · « **Reply #50 on:** Sat, 28 January 2012, 15:57:15 »

I might plunge into it (lazer cutter/3d printer). But its still costly. And I'm not made of money.

digitalleftovers · « **Reply #51 on:** Sat, 28 January 2012, 20:11:57 »

That company I linked to (Full Spectrum) implemented a printer driver for their units. You can actually "print" in rastor (burn an image) or vector (cut through the material) mode even from MS Word.

[video=youtube_share;nyYY_uIXy-A]http://youtu.be/nyYY_uIXy-A[/video]

litster · « **Reply #52 on:** Wed, 01 February 2012, 17:04:09 »

Sorry for not posting any update for a while. This work thing and Phantom Group Buy really got in the way :-). I have made a couple of small adjustments last week. I need to make one more change and need to confirm it before I kick this off.

If you received PM from me previously that confirmed your spot, you are in.

Thanks for your patience.

two4teezee · « **Reply #53 on:** Wed, 01 February 2012, 17:32:42 »

The black case in the original post has to be one of the coolest I've ever seen.

litster · « **Reply #54 on:** Wed, 01 February 2012, 18:00:30 »

You mean the one with recessed screws and nuts? It does look really nice. But the problem is with recessed screws and nuts, the screws and nuts can't apply pressure to the top and bottom layers to screw the case together. So it would require gluing layers together, which would incur more expensive manual labor. I might do an even smaller batch of that design in the future. Probably not...

mmmty · « **Reply #55 on:** Wed, 01 February 2012, 19:37:59 »

Quote from: litster;505619

If you received PM from me previously that confirmed your spot, you are in.

Thanks for your patience.

What!? I thought I was customer#1 but I didn't get a PM. Who do I have to sleep with? :sleep:

mmmty · « **Reply #56 on:** Wed, 01 February 2012, 19:38:59 »

Quote from: tsangan;501781

Makerbot is so damn cool, I almost plunged to just to get one, you see the small cupcakes and the companion cubes they made?

Buy a Makerbot and make your own keycaps!!

litster · « **Reply #57 on:** Wed, 01 February 2012, 19:51:51 »

mmmty, you are in. Don't worry. :-) You only need to sleep with me if you are a hot woman wearing nothing but 3 keycaps!

I looked into Makerbot. Even the newer, larger version is not large enough to print a keyboard in one piece. Potentially I could design it into left and right pieces and glue them together, but that would probably look pretty awful.

hazeluff · « **Reply #58 on:** Wed, 01 February 2012, 20:39:42 »

Quote from: litster;505766

mmmty, you are in. Don't worry. :-) You only need to sleep with me if you are a hot woman wearing nothing but 3 keycaps!

I looked into Makerbot. Even the newer, larger version is not large enough to print a keyboard in one piece. Potentially I could design it into left and right pieces and glue them together, but that would probably look pretty awful.

You could glue them together, but require some working afterwards to make it look like one piece. But then you'd have to also worry about how strong that seam is.

Quote from: mmmty;505749

Buy a Makerbot and make your own keycaps!!

I am so close to using Uni's Robotic club's Makerbot. They just got it working again I think.

digitalleftovers · « **Reply #59 on:** Wed, 01 February 2012, 20:49:21 »

Quote from: litster;505766

mmmty, you are in. Don't worry. :-) You only need to sleep with me if you are a hot woman wearing nothing but 3 keycaps!

I looked into Makerbot. Even the newer, larger version is not large enough to print a keyboard in one piece. Potentially I could design it into left and right pieces and glue them together, but that would probably look pretty awful.

By default, it certainly can't. I saw an interview with the company owner, who insisted (upon the interviewer's remark about its project size limitation) that it could easily be modded to do longer items. No details on what that mod entailed, though. He also mentioned some user had added two extra extruders, for a total of 4. Not sure how difficult that was either.

mmmty · « **Reply #60 on:** Wed, 01 February 2012, 21:07:50 »

Thanks, litster. I knew I could count on you. Too bad I'm not a girl :nono:

So, is a keycap too small for a Makerbot to make? Or it just can't make something as big as a full size keyboard. Maybe a Poker size?

[ Attachment Invalid Or Does Not Exist ] 39291[/ATTACH]

hazeluff · « **Reply #61 on:** Wed, 01 February 2012, 21:14:27 »

Quote from: mmmty;505848

Thanks, litster. I knew I could count on you. Too bad I'm not a girl :nono:

So, is a keycap too small for a Makerbot to make? Or it just can't make something as big as a full size keyboard. Maybe a Poker size?

(Attachment Link) 39291[/ATTACH]

From what I've asked at the club, they think it's possible. What they extrude is thin enough to make the stem,etc. But It will always need some work afterwards to make it smooth and stuff.

mmmty · « **Reply #62 on:** Wed, 01 February 2012, 21:20:14 »

You can carve the keycaps out by hand a little after them come out of the Makerbot. Half machine half man - cyborg keycaps.

hazeluff · « **Reply #63 on:** Wed, 01 February 2012, 21:20:47 »

Quote from: mmmty;505862

You can carve the keycaps out by hand a little after them come out of the Makerbot. Half machine half man - cyborg keycaps.

I would If i was making them. Probably just a nice sanding.

DrSchlock · « **Reply #64 on:** Wed, 01 February 2012, 23:27:51 »

Those are really nice cases. Makes me wish I bought a phantom board.

biolaser · « **Reply #65 on:** Thu, 02 February 2012, 00:26:17 »

I knew litster made a custom phantom case thread somewhere, and my luck is such that I find it after the first wave of buys is closed. Well, I guess it isn't a bad thing I missed out because I would be looking for the 7bit layout with no separations between the function keys. I know I could just cut up the body, but I dunno how to pull something like that off cleanly. I don't want to end up mutilating such a great looking case.

hazeluff · « **Reply #66 on:** Thu, 02 February 2012, 09:59:11 »

Quote from: biolaser;506098

I knew litster made a custom phantom case thread somewhere, and my luck is such that I find it after the first wave of buys is closed. Well, I guess it isn't a bad thing I missed out because I would be looking for the 7bit layout with no separations between the function keys. I know I could just cut up the body, but I dunno how to pull something like that off cleanly. I don't want to end up mutilating such a great looking case.

Saw -> File -> Sand -> Brasso

Makes it really smooth.

DrSchlock · « **Reply #67 on:** Thu, 02 February 2012, 15:23:28 »

Litster, would you consider releasing the case parts dimensions and your bill of materials?

trax · « **Reply #68 on:** Thu, 02 February 2012, 18:21:01 »

Quote from: DrSchlock;506603

Litster, would you consider releasing the case parts dimensions and your bill of materials?

He wont.

biolaser · « **Reply #69 on:** Thu, 02 February 2012, 20:58:07 »

Quote from: hazeluff;506363

Saw -> File -> Sand -> Brasso

Makes it really smooth.

In that case, count me in for the next round of cases!

hazeluff · « **Reply #70 on:** Thu, 02 February 2012, 21:03:22 »

Quote from: biolaser;506872

In that case, count me in for the next round of cases!

I don't guarantee anything with my method. But its what i did in woodshop (?) before.

biolaser · « **Reply #71 on:** Thu, 02 February 2012, 21:40:55 »

The only sanding I've done is on some wood for furniture finishing and metal for lapping heat sinks and a computer case mod.. wasn't sure whether the same methods would work for acrylic. Perhaps if I'm lucky, I will find some acrylic somewhere (likely a dumpster) and experiment with it!

hazeluff · « **Reply #72 on:** Thu, 02 February 2012, 21:48:32 »

Quote from: biolaser;506923

The only sanding I've done is on some wood for furniture finishing and metal for lapping heat sinks and a computer case mod.. wasn't sure whether the same methods would work for acrylic. Perhaps if I'm lucky, I will find some acrylic somewhere (likely a dumpster) and experiment with it!

Its pretty much the same thing. Its just brasso gives you that extra step if you want smoother than sanded surface. I reckon with a decently fine sand paper you can get pretty nice.

biolaser · « **Reply #73 on:** Thu, 02 February 2012, 22:04:48 »

Quote from: hazeluff;506932

Its pretty much the same thing. Its just brasso gives you that extra step if you want smoother than sanded surface. I reckon with a decently fine sand paper you can get pretty nice.

More similar to metal than wood I guess, since for lapping heat sinks, you want to go at least to 800 grit, if up to 1500 or 2000. I'm not so sure about the Brasso, though. I suspect it would cause the acrylic to craze.

hazeluff · « **Reply #74 on:** Thu, 02 February 2012, 22:09:25 »

Quote from: biolaser;506946

More similar to metal than wood I guess, since for lapping heat sinks, you want to go at least to 800 grit, if up to 1500 or 2000. I'm not so sure about the Brasso, though. I suspect it would cause the acrylic to craze.

I did it before. Its good, but be careful of getting it round the edge and on the surface. Put a small amount on a cloth (no dripping) and like use your finger to support it and only rub the edge. But given that this is on the inside of the case and not very visible. You might just op to just sand it down.

biolaser · « **Reply #75 on:** Thu, 02 February 2012, 22:17:04 »

Hmm if it worked for you, then I'll give it a try! Are you planning on doing the same thing? I think maybe you also went with the 7bit layout, right?

litster · « **Reply #76 on:** Thu, 02 February 2012, 22:38:49 »

LOL! I don't know if you guys are thread-crapping, or just want to give me free bumps! :-)

Anyhow, this group buy is closed. But I might have more coming available later.

hazeluff · « **Reply #77 on:** Thu, 02 February 2012, 22:40:46 »

Quote from: litster;506976

LOL! I don't know if you guys are thread-crapping, or just want to give me free bumps! :-)

Anyhow, this group buy is closed. But I might have more coming available later.

We're having a discussion, and your thing is closed anyway. Not trying to thread-crap. Sorry ><

Biolaser: I'm getting a "7bit" layout, but I haven't decided on a case yet. I really like this acrylic case, but I don't know if I want to spend this much.

litster · « **Reply #78 on:** Thu, 02 February 2012, 22:46:57 »

Okay, so you guys are just giving me free bumps. I thought it is kind of off-topic, talking about sawing and sanding metal and wood on an acrylic keyboard case thread. :-)

hazeluff · « **Reply #79 on:** Thu, 02 February 2012, 22:51:32 »

Quote from: litster;506984

Okay, so you guys are just giving me free bumps. I thought it is kind of off-topic, talking about sawing and sanding metal and wood on an acrylic keyboard case thread. :-)

Oh, it was all about cutting down that area under the home cluster and above the arrow keys. Someone brought up they have sanded some wood/metal. But the general topic is modding your TKL case to 7bit layout. Tho I think you sohuld just see if you can get enough people to get 7bit.

biolaser · « **Reply #80 on:** Thu, 02 February 2012, 22:54:39 »

Quote from: hazeluff;506980

Biolaser: I'm getting a "7bit" layout, but I haven't decided on a case yet. I really like this acrylic case, but I don't know if I want to spend this much.

I thought the same: you could get a regular Filco for this price. But on the other hand, it is a limited edition acrylic case for a limited edition board. I was debating for a while but the latter consideration won. I'm going all out for this board. One sad looking bank account coming up!

Quote from: litster;506984

Okay, so you guys are just giving me free bumps. I thought it is kind of off-topic, talking about sawing and sanding metal and wood on an acrylic keyboard case thread. :-)

Yeah, sorry about polluting your thread. Just wondering what the best method would be to modify one of your cool-looking acrylic cases to fit the 7bit function row and under the 6-pack without mutilating the case... yes this:

Quote from: hazeluff;506987

Oh, it was all about cutting down that area under the home cluster and above the arrow keys. Someone brought up they have sanded some wood/metal. But the general topic is modding your TKL case to 7bit layout. Tho I think you sohuld just see if you can get enough people to get 7bit.

litster · « **Reply #81 on:** Thu, 02 February 2012, 22:56:45 »

No problem. Cut that section out is fairly easy. I already made a top layer for the 7BIT layout. I just don't want to make a separate batch of 7BIT top layers. Cutting and sanding the regular top layer would ruin it. You can make it work, but without lasercutting it, your cut edge would be all rough, and you risk cracking it.

Whereas lasercutting doesn't have that effect. In fact laser-cut edge is shiny and smooth, called. Otherwise you would have to do flaming polishing on the cut edge, which is hard to get it right. It would be very hard to cut that section out after the fact without hating the result afterward.

hazeluff · « **Reply #82 on:** Thu, 02 February 2012, 22:59:57 »

Quote from: litster;506990

No problem. Cut that section out is fairly easy. I already made a top layer for the 7BIT layout. I just don't want to make a separate batch of 7BIT top layers. Cutting and sanding the regular top layer would ruin it. You can make it work, but without lasercutting it, your cut edge would be all rough, and you risk cracking it.

Whereas lasercutting doesn't have that effect. In fact laser-cut edge is shiny and smooth. It would be very hard to cut that section out after the fact without hating the result afterward.

Well ok, But I want to see 7bit top layered one at some point.

biolaser · « **Reply #83 on:** Thu, 02 February 2012, 23:05:48 »

I guess until the 7bit layout acrylic case becomes part of a group buy, I will be making and using a custom cardboard case

hazeluff · « **Reply #84 on:** Thu, 02 February 2012, 23:09:02 »

Quote from: biolaser;507002

I guess until the 7bit layout acrylic case becomes part of a group buy, I will be making and using a custom cardboard case

I'm thinking of one made of mountain dew cans.

biolaser · « **Reply #85 on:** Thu, 02 February 2012, 23:21:58 »

Quote from: hazeluff;507008

I'm thinking of one made of mountain dew cans.

That would be quite the unique case, if it were feasible... would make for some nice pics.

litster · « **Reply #86 on:** Mon, 06 February 2012, 02:53:06 »

I might have a small number of cases available after the initial reserved units. PM me if you are interested in getting one.

Goly · « **Reply #87 on:** Mon, 06 February 2012, 10:30:15 »

Hi

I ordered one in Deskthority and I ordered as a gift for mi gf birthday, its the 25 of this month... I have any possiblity to get it at that time?

cheers

mmmty · « **Reply #88 on:** Tue, 07 February 2012, 11:05:07 »

Payment sent. Goodbye money, hello acrylic cases. :wave:

DanGWanG · « **Reply #89 on:** Tue, 07 February 2012, 16:44:51 »

Quote from: mmmty;508248

Payment sent. Goodbye money, hello acrylic cases. :wave:

What color did you get? I had to go with bulls colors!

mmmty · « **Reply #90 on:** Tue, 07 February 2012, 19:00:18 »

Both colors. Might sell the one I don't like as much but probably keep both.

demik · « **Reply #91 on:** Tue, 07 February 2012, 19:03:28 »

Quote from: Goly;507314

Hi

I ordered one in Deskthority and I ordered as a gift for mi gf birthday, its the 25 of this month... I have any possiblity to get it at that time?

cheers

from my understanding.. you're looking at next month at the earliest.

litster · « **Reply #92 on:** Tue, 07 February 2012, 19:40:25 »

I hope it will be sooner than later. :-)

litster · « **Reply #93 on:** Sat, 18 February 2012, 13:18:44 »

Turned out it was really quick. Local shop that I can drive to FTW!

Now it is still going to do some magic to make it Filco compatible. It is going to take me all weekend if not longer. I still have hardware parts arriving on Tuesday. After that, I need to put every case together, and then figure out a good and efficient way to pack these. Then print some labels, lots of tapes, trips to the post office, etc, etc. So I won't be able to ship these out for at least another couple of weeks.

Meanwhile, Hopefully I will have time to post pictures as I go.

demik · « **Reply #94 on:** Sat, 18 February 2012, 13:21:12 »

Can't wait!!

reaper · « **Reply #95 on:** Sat, 18 February 2012, 14:00:31 »

^ Me too! I just wanna see some pics the the final products. =P

Sent from iPhone

byFd · « **Reply #96 on:** Sat, 18 February 2012, 14:37:16 »

do you still have extras? probably not but i tought i ask xD
looking nice!

Wildcard · « **Reply #97 on:** Sat, 18 February 2012, 15:02:12 »

Very creative. I like the layered approach for these cases.

litster · « **Reply #98 on:** Sat, 18 February 2012, 15:36:14 »

Quote from: byFd;518023

do you still have extras? probably not but i tought i ask xD
looking nice!

I still have a couple of each color combo available. Most of them are paid for already.

litster · « **Reply #99 on:** Sat, 18 February 2012, 17:52:52 »

Ragnorock is organizing a group buy of a set of red on black 87-key set with an add-on kit for Phantom (1.5x modifiers and 1x diamond keys). Also available is a 104 add-on set. There is also an ISO add-on kit if it reaches 15 orders.

I think this set would look pretty good with my black+red acrylic cases.

Link here: http://geekhack.org/showthread.php?27473-quot-Ragnarok-quot-Doubleshot-Red-on-Black-87-104-Keyset-Order-Thread-TAKING-ORDERS

litster · « **Reply #100 on:** Sat, 18 February 2012, 18:55:41 »

For the first time, here is the opaque black with transparent red acrylic case. Keep in mind that the red will actually be darker when a keyboard is installed in the case and block out some light.

DanGWanG · « **Reply #101 on:** Sat, 18 February 2012, 19:01:38 »

Quote from: litster;518214

For the first, here is the opaque black with transparent red acrylic case. Keep in mind that the red will actually be darker when a keyboard is installed in the case and block out some light.

Show Image

I can't to get mine OMG!!!!!!! (Valley girl accent)

alaricljs · « **Reply #102 on:** Sat, 18 February 2012, 20:21:05 »

That is fetish right there.

hazeluff · « **Reply #103 on:** Sat, 18 February 2012, 20:23:11 »

Orgasmic

demik · « **Reply #104 on:** Sat, 18 February 2012, 20:24:57 »

Quote from: DanGWanG;518219

I can't to get mine OMG!!!!!!! (Valley girl accent)

YES YES YES!!!

WhiteFireDragon · « **Reply #105 on:** Sat, 18 February 2012, 20:45:54 »

Quote from: litster;518214

For the first time, here is the opaque black with transparent red acrylic case. Keep in mind that the red will actually be darker when a keyboard is installed in the case and block out some light.

Show Image

Looks uber sexy! Got any more pics from different angles or high res pics?

My one fear of acrylic is fingerprint and dust magnet.

keyboardlover · « **Reply #106 on:** Sun, 19 February 2012, 09:11:46 »

So TIL that my Kustom Filco REALLY needs a new case.

Any chance there may be an extra case litster? I would buy it in a second!

F u r u y á · « **Reply #107 on:** Sun, 19 February 2012, 10:36:25 »

I'm the only one who doesn't like the big screw heads? I'd prefer a slick smooth seamingless (does that word exist?) acrylic top.

tsangan · « **Reply #108 on:** Sun, 19 February 2012, 10:47:59 »

Quote from: keyboardlover;518586

So TIL that my Kustom Filco REALLY needs a new case.

Any chance there may be an extra case litster? I would buy it in a second!

I believe there's a few left but not many so you should PM him and get in on this

Quote from: F u r u y á;518644

I'm the only one who doesn't like the big screw heads? I'd prefer a slick smooth seamingless (does that word exist?) acrylic top.

Flat screws will require gluing of the different acrylic layers to keep them in place from my understanding. While I'm not a Huge fan of it myself, litster says it doesn't interfere with you when you're typing so that's fine

I think if you get the case you can just saw off the screws to make it flat, but like I said glue might be needed

keyboardlover · « **Reply #109 on:** Sun, 19 February 2012, 11:33:57 »

Thanks tsangan...litster, YGPM!

F u r u y á · « **Reply #110 on:** Sun, 19 February 2012, 12:48:59 »

Quote from: ripster;518649

Seemingly there is no word seamingless.

Thx. So I indeed made up that word xD

Quote from: tsangan;518654

Flat screws will require gluing of the different acrylic layers to keep them in place from my understanding. While I'm not a Huge fan of it myself, litster says it doesn't interfere with you when you're typing so that's fine

I think if you get the case you can just saw off the screws to make it flat, but like I said glue might be needed

Yes, I'm sure that the screws won't interfere, my concern was entirely aesthetic. I'm also sure that the vast majority likes the aesthetic touch of the screws, not my case though.

I'd love a completely flat acrylic top (not even screw holes), but a flat head embbeded shiny screw would be interesting. I should stop threadcrapping at this point, I'm not even taking part in this buy :tongue1:

litster · « **Reply #111 on:** Sun, 19 February 2012, 13:29:00 »

I made one with sunken screws and nuts. It looks good, as good as my current design. But it required gluing the top 2 layers, the middle 2 layers, and the bottom 2 layers. I made a mess gluing them and it took a long time for me. I could ask the shop to do but it would cost more labor.

My current design works pretty well. the case is actually thinner than your regular Filco case. So even with exposed screws, they don't come up very high. If currently your palm or your thumbs touch your keyboard's case while you type, then the screws might interfere with you. But if you do type like that, you are doing it wrong :-).

KL, you got PM.

keyboardlover · « **Reply #112 on:** Sun, 19 February 2012, 13:30:52 »

Yay - ordered a white one! =)

litster · « **Reply #113 on:** Sun, 19 February 2012, 14:33:46 »

Now with keyboards installed into the cases.

byFd · « **Reply #114 on:** Sun, 19 February 2012, 17:33:12 »

the red and blue is just the border of the case right?
i just thought how awesome it would look if you cut out some logo or letters above the arrows and the red/blue would be visible from the layer underneath

kaiserreich · « **Reply #115 on:** Sun, 19 February 2012, 18:11:48 »

Red and black would definitely look good with the Ragnarock set

keyboardlover · « **Reply #116 on:** Tue, 28 February 2012, 07:07:48 »

Doooood you need to make a version that fits Realforces!

demik · « **Reply #117 on:** Tue, 28 February 2012, 20:06:37 »

so, mine should be here this week!!! but i will only keep it for a little bit since it's going straight to alaricljs who is handling my phantom build.

alaricljs · « **Reply #118 on:** Tue, 28 February 2012, 20:08:25 »

Mmmmm, pretty plastic.

demik · « **Reply #119 on:** Tue, 28 February 2012, 20:10:31 »

better take care of it!!!

watch i get my phantom back in a filco case :rofl:

litster · « **Reply #120 on:** Tue, 28 February 2012, 20:18:50 »

Ah, you blew my cover! :-)

I shipped about 3/4 of the orders. Most of the US orders are out. Some of the EU orders are out. If yours is shipped, you should have already received an email from me with tracking number. If you didn't, yours is not shipped yet. I spent all weekend just to pack everything nd print the labels. I will try to get the rest out this week. Some of the international addresses threw me (the ignorant American) off a bit. :-)

demik · « **Reply #121 on:** Tue, 28 February 2012, 20:20:20 »

whoops! =p

litster · « **Reply #122 on:** Tue, 28 February 2012, 20:22:36 »

No problem. I meant to send an update to the thread. This is as good a time as ever.

BTW, if any of you have any problem with the case, please email me (you know my email address) so I can take care of it for you.

alaricljs · « **Reply #123 on:** Tue, 28 February 2012, 20:25:18 »

Quote from: demik;530011

better take care of it!!!

watch i get my phantom back in a filco case :rofl:

Doh! You've noticed my sig.

demik · « **Reply #124 on:** Wed, 29 February 2012, 00:25:21 »

its in LA!!! should be getting it tomorrow

reaper · « **Reply #125 on:** Wed, 29 February 2012, 00:27:59 »

Nice! I wanna see some pics! =D

litster · « **Reply #126 on:** Wed, 29 February 2012, 01:02:28 »

Quote from: demik;530425

its in LA!!! should be getting it tomorrow

I know! Most of the Priority Mail shipment are to be delivered tomorrow. Super fast!

tsangan · « **Reply #127 on:** Wed, 29 February 2012, 01:03:05 »

Quote from: demik;530425

its in LA!!! should be getting it tomorrow

That's what reaper thought too for a lot of his packages

Changdrew · « **Reply #128 on:** Wed, 29 February 2012, 01:03:27 »

Quote from: litster;530460

I know! Most of the Priority Mail shipment are to be delivered tomorrow. Super fast!

Mine hasn't even gotten to the post office yet.... TT

demik · « **Reply #129 on:** Wed, 29 February 2012, 01:04:46 »

Quote from: tsangan;530461

That's what reaper thought too for a lot of his packages

If you jinxed me im coming after your Tiffany's!!!

tsangan · « **Reply #130 on:** Wed, 29 February 2012, 01:16:39 »

Quote from: demik;530467

If you jinxed me im coming after your Tiffany's!!!

That's just mean :fish:

mmmty · « **Reply #131 on:** Wed, 29 February 2012, 07:30:14 »

I might be getting my cases today. It's okay to be jealous. :wave:

alaricljs · « **Reply #132 on:** Wed, 29 February 2012, 08:40:01 »

Quote from: Changdrew;530463

Mine hasn't even gotten to the post office yet.... TT

Don't be too sure of that... DW's tracking was never updated as of last night. (yeah DW, no point in blocking the tracking # if you don't block the barcode!)

reaper · « **Reply #133 on:** Wed, 29 February 2012, 08:53:58 »

Quote from: tsangan;530461

That's what reaper thought too for a lot of his packages

Hey, leave me out of this.. I'm not in this group buy... the only case I'm getting is this one.

mmmty · « **Reply #134 on:** Wed, 29 February 2012, 09:14:08 »

That looks nice. What is it - aluminum??

reaper · « **Reply #135 on:** Wed, 29 February 2012, 09:26:01 »

Yup

Sent from iPhone

mmmty · « **Reply #136 on:** Wed, 29 February 2012, 09:44:13 »

Now I'm jealous

reaper · « **Reply #137 on:** Wed, 29 February 2012, 09:45:44 »

lol You're the one with TypeNow Solid. =P Anyway, your PBT keycaps are on the way. =D

DanGWanG · « **Reply #138 on:** Wed, 29 February 2012, 10:30:00 »

Just got my black and red one

Pics and review will be going up in my subforum later this evening!

tsangan · « **Reply #139 on:** Wed, 29 February 2012, 10:31:33 »

Quote from: reaper;530702

Hey, leave me out of this.. I'm not in this group buy... the only case I'm getting is this one.

Show Image

Getting a KMAC and not hooking me up?

litster · « **Reply #140 on:** Wed, 29 February 2012, 10:31:36 »

Quote from: DanGWanG;530806

Just got my black and red one

Pics and review will be going up in my subforum later this evening!

OMG! I am getting nervous!

DanGWanG · « **Reply #141 on:** Wed, 29 February 2012, 10:36:33 »

Quote from: litster;530813

OMG! I am getting nervous!

Why? lol...this case is freaking amazing. The acrlyic feels and looks 100x better in person, though your pics were pretty amazing. I need to go to Home Depot and buy those hex drivers, sigh...

litster · « **Reply #142 on:** Wed, 29 February 2012, 10:41:09 »

Oh, that is great to hear from you! I wasn't sure how everyone would think when they see the cases in person. I thought the pictures made them look too good. I don't want to over promise and then under deliver.

mmmty · « **Reply #143 on:** Wed, 29 February 2012, 10:55:39 »

Crap!! I was hoping to be first so I can brag about it.

Status: Out for Delivery. woohoo!!

RiGS · « **Reply #144 on:** Wed, 29 February 2012, 11:08:26 »

Speaking of acrylic cases., this is the hottest keyboard I have ever seen.

litster · « **Reply #145 on:** Wed, 29 February 2012, 11:41:16 »

Saw that last night. When/if our phantom plates are anodized, I might make a clear acrylic case for my self to show off the plate and the PCB.

reaper · « **Reply #146 on:** Wed, 29 February 2012, 11:41:18 »

Quote from: harrison;530881

wow. that white PCB and white LEDs really set off the blue of the plate/acrylic and legend. sexy.

Yeah, that looks really cool!

DanGWanG · « **Reply #147 on:** Wed, 29 February 2012, 11:41:28 »

Quote from: RiGS;530855

Speaking of acrylic cases., this is the hottest keyboard I have ever seen.

Show Image

Show Image

Mine's going to look similar to that tonight

Putting on imsto red on beige dyesubs! Now I just hope I don't run into any issues opening my case....

inlikeflynn · « **Reply #148 on:** Wed, 29 February 2012, 12:44:48 »

Quote from: RiGS;530855

Speaking of acrylic cases., this is the hottest keyboard I have ever seen.

Show Image

Show Image

Sorry for not knowing the answer, but is this one of your cases Lister or another one of the custom ones we cannot get here?

Also, have any high resolution pictures of this? It would make a great background!

RiGS · « **Reply #149 on:** Wed, 29 February 2012, 12:46:18 »

That is a Korean custom acrylic case with anodized plate and white A87 PCB.

RiGS · « **Reply #150 on:** Wed, 29 February 2012, 12:47:16 »

Quote from: litster;530883

Saw that last night. When/if our phantom plates are anodized, I might make a clear acrylic case for my self to show off the plate and the PCB.

You mean like this?

inlikeflynn · « **Reply #151 on:** Wed, 29 February 2012, 13:01:03 »

Quote from: RiGS;530942

That is a Korean custom acrylic case with anodized plate and white A87 PCB.

Thanks, do you have any high resolution pictures of this? It would make a great background!

litster · « **Reply #152 on:** Wed, 29 February 2012, 13:17:57 »

Quote from: RiGS;530944

Show Image

You mean like this?

Yes.

I also saw this last night: http://www.otd.kr/bbs/board.php?bo_table=album&wr_id=98215

To do this one, I would need a PCB-mounted keyboard. I could use a Wyse PCB and saw off the numpad, or just hand wire the switches. Use a layer of acrylic to hold all the switches. That layer would be long enough and wide enough to match other layers so the acylic switch plate would just be part of the case.

RiGS · « **Reply #153 on:** Wed, 29 February 2012, 13:19:44 »

I don't have any pics. Anyway I don't like the old design of those KBC keys with that TAB key, the oddly aligned Ctrl & Alt and the top aligned F-keys.

RiGS · « **Reply #154 on:** Wed, 29 February 2012, 13:22:02 »

Quote from: litster;530993

Yes.

I also saw this last night: http://www.otd.kr/bbs/board.php?bo_table=album&wr_id=98215

To do this one, I would need a PCB-mounted keyboard. I could use a Wyse PCB and saw off the numpad, or just hand wire the switches. Use a layer of acrylic to hold all the switches. That layer would be long enough and wide enough to match other layers so the acylic switch plate would just be part of the case.

Sure, it is a clever design.

DanGWanG · « **Reply #155 on:** Wed, 29 February 2012, 15:27:16 »

Some pics for you all!

[ Attachment Invalid Or Does Not Exist ] 42203[/ATTACH] [ Attachment Invalid Or Does Not Exist ] 42204[/ATTACH]

Reptile · « **Reply #156 on:** Wed, 29 February 2012, 17:50:25 »

More!

Also 500 posts

wuBu · « **Reply #157 on:** Wed, 29 February 2012, 18:02:31 »

Quote from: reaper;530702

Hey, leave me out of this.. I'm not in this group buy... the only case I'm getting is this one.

Show Image

where? and how much??

BiNiaRiS · « **Reply #158 on:** Wed, 29 February 2012, 18:23:16 »

Quote from: wuBu;531273

where? and how much??

Korea and pretty much not for sale unless you know someone.

Changdrew · « **Reply #159 on:** Wed, 29 February 2012, 18:28:01 »

Got it today! Now time to find out how to put it on my filco.

litster · « **Reply #160 on:** Wed, 29 February 2012, 18:35:13 »

Quote from: Changdrew;531291

Got it today! Now time to find out how to put it on my filco.

Sorry I haven't made the video yet to show how to open up a Filco. Do you need any help to open it?

DanGWanG · « **Reply #161 on:** Wed, 29 February 2012, 18:40:25 »

Did a review on this for anyone interested!

http://geekhack.org/showthread.php?28032-4-20-Review-litster-Acrylic-Case-in-Red-Black

Changdrew · « **Reply #162 on:** Wed, 29 February 2012, 18:43:55 »

Quote from: litster;531297

Sorry I haven't made the video yet to show how to open up a Filco. Do you need any help to open it?

That would be nice :nod:

mmmty · « **Reply #163 on:** Wed, 29 February 2012, 19:36:33 »

Got mine today. Very nice, shiny, and smooth. The cases are very light. Can't decide which one I like better so I'll keep both - 1 for Filco w/ ergo clears and 1 for Filco Zero.

tsangan · « **Reply #164 on:** Wed, 29 February 2012, 19:40:36 »

Quote from: mmmty;531350

Got mine today. Very nice, shiny, and smooth. The cases are very light. Can't decide which one I like better so I'll keep both - 1 for Filco w/ ergo clears and 1 for Filco Zero.

I have 2 cases too! No keyboard to put it in!

Into the keyboard closet it goes for 2 months

demik · « **Reply #165 on:** Wed, 29 February 2012, 19:40:38 »

got mine today also. very lovely case.

my box came a little beat up, but the packaging was so good nothing happened to it

!

also litster, what were the tools we needed again? this could be a good excuse to go shopping for tools

put me down for another if you do another run of cases! i would LOVE to get an all clear one

mmmty · « **Reply #166 on:** Wed, 29 February 2012, 19:44:24 »

Quote from: tsangan;531357

I have 2 cases too! No keyboard to put it in!

Into the keyboard closet it goes for 2 months

I thought you were getting a Phantom.

litster · « **Reply #167 on:** Wed, 29 February 2012, 19:46:16 »

Quote from: demik;531358

got mine today also. very lovely case.

my box came a little beat up, but the packaging was so good nothing happened to it !

also litster, what were the tools we needed again? this could be a good excuse to go shopping for tools

put me down for another if you do another run of cases! i would LOVE to get an all clear one

Whew! So glad that my packaging protected the case well.

You will need a 3/32” hex driver for the screw and a 1/4" socket to open and close the case.

DanGWanG · « **Reply #168 on:** Wed, 29 February 2012, 20:21:41 »

[ Attachment Invalid Or Does Not Exist ] 42262[/ATTACH]

mo murda mo murda

demik · « **Reply #169 on:** Wed, 29 February 2012, 20:22:33 »

we're going to have twin keyboards (well, kinda.. dont have a cc skull.. but i'll put my vader on there)

just got my DA black edition too!

litster · « **Reply #170 on:** Wed, 29 February 2012, 23:43:27 »

Just posted a video to demonstrate how to open up a Filco. Enjoy!

[video=youtube;AfPaC8Hvczo]http://www.youtube.com/watch?v=AfPaC8Hvczo[/video]

reaper · « **Reply #171 on:** Wed, 29 February 2012, 23:46:17 »

^ Thank you for that. It should come in handy for many. =D

tsangan · « **Reply #172 on:** Wed, 29 February 2012, 23:49:12 »

I cringed a few times during that video

biolaser · « **Reply #173 on:** Thu, 01 March 2012, 00:09:03 »

Just got mine today too! Beautiful case (I got the white/blue one, and now I think I should have gotten the black/red too). Initially, I was thinking of modding it to fit phantom 7bit layout, but I don't think I can bring myself to do that! So as tsangan said, into the closet it goes until I get a suitable keyboard.

mmmty · « **Reply #174 on:** Thu, 01 March 2012, 08:21:04 »

The white one.

[ Attachment Invalid Or Does Not Exist ] 42297[/ATTACH]
[ Attachment Invalid Or Does Not Exist ] 42298[/ATTACH]

GeorgeStorm · « **Reply #175 on:** Thu, 01 March 2012, 08:31:28 »

These look so good!
Do they fit Ducky boards?

mmmty · « **Reply #176 on:** Thu, 01 March 2012, 08:49:42 »

I was told "no".

GeorgeStorm · « **Reply #177 on:** Thu, 01 March 2012, 08:53:10 »

Don't think I can afford buying a filco awell as one of these

PM sent over at Deskthority since I'm having some issues with GeekHack atm.

reaper · « **Reply #178 on:** Thu, 01 March 2012, 09:25:29 »

The white one looks so nice... I was gonna get one but something came up. :juggle:

mmmty · « **Reply #179 on:** Thu, 01 March 2012, 10:07:54 »

Yes, the aluminum case came up - right?

reaper · « **Reply #180 on:** Thu, 01 March 2012, 10:10:58 »

Not just the case... :behindsofa:

mmmty · « **Reply #181 on:** Thu, 01 March 2012, 10:12:12 »

:scared: tell us more!

reaper · « **Reply #182 on:** Thu, 01 March 2012, 10:21:41 »

Ok, please check your pm. =)

DanGWanG · « **Reply #183 on:** Thu, 01 March 2012, 10:22:52 »

Forward to me too!

alaricljs · « **Reply #184 on:** Thu, 01 March 2012, 10:25:55 »

If you can't share then umm... don't share. This whole nanny-nanny-poo-poo I know **** you don't is pathetic.

reaper · « **Reply #185 on:** Thu, 01 March 2012, 10:28:21 »

^ I just didn't wanna ruin or take litster's thread off topic. That's all. :Cry:

alaricljs · « **Reply #186 on:** Thu, 01 March 2012, 10:30:34 »

Gonna de-rail it with 20+ 'PM me too!'

mmmty · « **Reply #187 on:** Thu, 01 March 2012, 10:30:45 »

Yes, that would definitely take any thread off topic.

Nice!!! lucky reaper. Now I'm really jealous.

News:

Author Topic: Acrylic Tenkeyless Keyboard Cases (Read 30438 times)