Additional plate + pcb means an additional set to your kit.
just realized it was ruffle style, rip my F5 and sleeping time.Last minute decision, was worried that some of you were sleeping. Hmmm.
just realized it was ruffle style, rip my F5 and sleeping time.Last minute decision, was worried that some of you were sleeping. Hmmm.
I call for a decision reversal! We're all awake for you! :-X jk Thanks for your hard work and gorgeous design ;D . Hope I get in.just realized it was ruffle style, rip my F5 and sleeping time.Last minute decision, was worried that some of you were sleeping. Hmmm.
I didn't see the diffuser option when I was choosing, not sure if I'm blind. I also saw an option at the end called ream? I wasn't sure what that was.I just clicked it whatever it was...
just realized it was ruffle style, rip my F5 and sleeping time.Last minute decision, was worried that some of you were sleeping. Hmmm.
*cough* well this could be done half fcfs, half raffle ;)
I'd like to add a diffuser to my entry, I guess that's just something I'll pm you about if I get in :).
For those who wanted the diffuser but coudn't find it in the form earlier, you may edit your response.
So sorry for the inconvenience caused.
For those who wanted the diffuser but coudn't find it in the form earlier, you may edit your response.
So sorry for the inconvenience caused.
For those who wanted the diffuser but coudn't find it in the form earlier, you may edit your response.I could no longer edit, but had to resubmit. I hope that doesn't cause an issue.
So sorry for the inconvenience caused.
You can edit your response :)Dumb question, how do I do that? I don't know how to get my form back.
You can edit your response :)Dumb question, how do I do that? I don't know how to get my form back.
I'd hold off resubmitting a new form, since that will just make more work for yuktsi :(
i just submited another ... pls delete the 1st one because i got wrong to put pcb and plate into order :(
For those who wanted the diffuser but coudn't find it in the form earlier, you may edit your response.
So sorry for the inconvenience caused.
You guys can edit your forms now. All duplicated ones should be deleted :) you can always double check your forms to see what you need to changeOkay, i couldn't find my old form so I resubmitted.
You guys can edit your forms now. All duplicated ones should be deleted :) you can always double check your forms to see what you need to changeAFAIK, there is no way to pull a form back up after the window/tab has been exited.
You guys can edit your forms now. All duplicated ones should be deleted :) you can always double check your forms to see what you need to changeAFAIK, there is no way to pull a form back up after the window/tab has been exited.
Yes you can, if you're logged in to your google email. Reclicking the google form will bring you to a 'You've already submitted response' pageHmmm I was logged in, submitted 2 times and just brings me back to the front page of a new form.
It still just brings up a spankin new form for me. Figure I'll just sort it out if I win. If it means my entry isn't counting... well someone let me know :PResubmit :thumb:
Resubmit :thumb:From the source. Noted.
You guys can edit your forms now. All duplicated ones should be deleted :) you can always double check your forms to see what you need to changeAFAIK, there is no way to pull a form back up after the window/tab has been exited.
Resubmit :thumb:From the source. Noted.
Okay just found this out:but Purple on pink was my second choice of what I wanted
- Make your google forms entry
- On the final "Thank you" page, instantly click the edit link
- Bookmark the url you end up with.
This will be the link to edit/review your entry forever. Don't share it or I will turn your order into purple/pink.
Unless you got some DSA Hana caps, that is not what you want.
Same. The only reason I chose Grey/Black is because it goes well with everythingOkay just found this out:but Purple on pink was my second choice of what I wanted
- Make your google forms entry
- On the final "Thank you" page, instantly click the edit link
- Bookmark the url you end up with.
This will be the link to edit/review your entry forever. Don't share it or I will turn your order into purple/pink.
Unless you got some DSA Hana caps, that is not what you want.
I have submitted one order for myself and one for my friend. Now I would like to submit another for my another friend but I find I am not allowed to reply once again. What should I do for this issue.(I will pay for them but shipping address is different for me and two friends)
My friend have submitted order with his geekhack account! we hope we don't miss the group buy.
thanks for your advice, I just realized that this is a raffle group buy. I have asked my friend to submit the order by his own.I have submitted one order for myself and one for my friend. Now I would like to submit another for my another friend but I find I am not allowed to reply once again. What should I do for this issue.(I will pay for them but shipping address is different for me and two friends)
My friend have submitted order with his geekhack account! we hope we don't miss the group buy.
This doesn't sound dodgy at all.
Maybe just get your friends to fill the form out themselves?
thanks for your advice, I just realized that this is a raffle group buy. I have asked my friend to submit the order by his own.I have submitted one order for myself and one for my friend. Now I would like to submit another for my another friend but I find I am not allowed to reply once again. What should I do for this issue.(I will pay for them but shipping address is different for me and two friends)
My friend have submitted order with his geekhack account! we hope we don't miss the group buy.
This doesn't sound dodgy at all.
Maybe just get your friends to fill the form out themselves?
Entered! Hoping luck is with me today. :D
guys , whether the page 2 was option for extra pcb+plate , diffuser and stabilizer?Wat
Sent from my SM-G935F using Tapatalk
joined, time to pray.
Edit: Is it Ok if I just edited the google form, or should I PM you too?
Hi peeps, I am a still a little overwhelmed by the amount of responses that I am getting. I would like to thank those who made an effort to participate, those who showed enough interest to make this GB possible and Byker who stayed up late to wait for my submission. Thank you.
I've just stopped the Google Form to accept anymore responses. Taking out all the duplicated re-submission, I've received a little more than a hundred responses. I'm definitely feeling more bad than happy, for not being able to fulfill most of the responses. I promise there are more exciting projects coming, Tris/CE be will up in a couple of days, there will be 910 CE for sure and the most exciting of all - TGR Alice (ergonomic layout and yes, Leeku had sent me the layout file for EM7 pcb).
There were mistakes made in the submission form today, last minute of change from fcfs to raffle style and now it became half raffle half fcfs GB. I must apologize for the troubles and frustrations caused. Also, I had forgotten to mention one of the most important event in the thread earlier, due to the lack of sleep. Together with Aconic and Krap, everyone who participated (yup whether you got a slot or not) is entitled to redeem a Aconic Goo or Krap Rabbit. :eek:
Enjoy the rest of your weekend and have a nice week ahead. Cheers.
I hope my first submission counted as FCFS (I had to submit 3 responses after the form was incomplete the first time)... If not, I really hope I win this one! I was one of the ones staying up waiting... Regardless thank you for your awesome designs Yuktsi! If anything I got to experience all the basic human emotions in only a few hours lol.MoreHi peeps, I am a still a little overwhelmed by the amount of responses that I am getting. I would like to thank those who made an effort to participate, those who showed enough interest to make this GB possible and Byker who stayed up late to wait for my submission. Thank you.
I've just stopped the Google Form to accept anymore responses. Taking out all the duplicated re-submission, I've received a little more than a hundred responses. I'm definitely feeling more bad than happy, for not being able to fulfill most of the responses. I promise there are more exciting projects coming, Tris/CE be will up in a couple of days, there will be 910 CE for sure and the most exciting of all - TGR Alice (ergonomic layout and yes, Leeku had sent me the layout file for EM7 pcb).
There were mistakes made in the submission form today, last minute of change from fcfs to raffle style and now it became half raffle half fcfs GB. I must apologize for the troubles and frustrations caused. Also, I had forgotten to mention one of the most important event in the thread earlier, due to the lack of sleep. Together with Aconic and Krap, everyone who participated (yup whether you got a slot or not) is entitled to redeem a Aconic Goo or Krap Rabbit. :o
Enjoy the rest of your weekend and have a nice week ahead. Cheers.
It was open from around 3 EST to 1230 EStSo many contradictions. I hope too many people weren't affected by it.
I know. It was very frustrating and I'm sure people were impacted by it. Sorry Yuktsi, just the truth.It was open from around 3 EST to 1230 EStSo many contradictions. I hope too many people weren't affected by it.
Definitely. I woke up 15min before the GB thread was up and looked into the IC, assuming that it would take at least an hour to get approved (and yuktsi not having posted about submitting it, which definitely already happened at that point) I thought I could sleep an hour longer. An hour later I woke up to almost a full page of comments under the GB thread that was approved just when I fell asleep :( .I know. It was very frustrating and I'm sure people were impacted by it. Sorry Yuktsi, just the truth.It was open from around 3 EST to 1230 EStSo many contradictions. I hope too many people weren't affected by it.
I'll definitely be in for a 910CE if I don't get into this round :).
I'm actually not too familiar either. I was also wondering when they happen. Is it right after the first round ones finish? or later on?
As someone new to Yuktsi's stuff, how does his CE stuff differ?
TGR Alice (ergonomic layout ... EM7 pcb)
I waited all day yesterday and saw it go up. When I saw it was raffle style and there were new color options I decided to sleep on it thinking I had 48 hours. :(I'm in the same boat. I was going to think on it today but then I had my mind made up for me. Probably for the best as I spend way too much money on keyboards and I really don't even like 65% form factor.
Oh well. Good luck to everyone in the raffle.
What means CE!?I believe yuktsi's second round versions are always labeled as CE
TGR Alice (ergonomic layout and yes, Leeku had sent me the layout file for EM7 pcb).
Also, I had forgotten to mention one of the most important event in the thread earlier, due to the lack of sleep. Together with Aconic and Krap, everyone who participated (yup whether you got a slot or not) is entitled to redeem a Aconic Goo or Krap Rabbit. :eek:
I was quick on the form submission but then had to resubmit to get a diffuser in there (as per Yuktsi). Hopefully that didn't crap on my chances of being in the FCFS half of the orders (if I was indeed quick enough for that). Let us pray.I fear the same my friend.
I was quick on the form submission but then had to resubmit to get a diffuser in there (as per Yuktsi). Hopefully that didn't crap on my chances of being in the FCFS half of the orders (if I was indeed quick enough for that). Let us pray.Where did you find that FCFS half of the order was mentioned?
In the same boat man, I even stayed up late for this even though I had work early in the morning. Hoping that my first submission gets me a spot.I was quick on the form submission but then had to resubmit to get a diffuser in there (as per Yuktsi). Hopefully that didn't crap on my chances of being in the FCFS half of the orders (if I was indeed quick enough for that). Let us pray.I fear the same my friend.
LOL. This whole thing is a f&#%ing mess! We can only laugh at it now. Over 100 submissions... Where did these people come from? Haha
Only 3 pages man lol, but it's towards the bottom of the second page.Lol mobile app is 12 pages and im unfortunately stuck with it.
LOL. This whole thing is a f&#%ing mess! We can only laugh at it now. Over 100 submissions... Where did these people come from? HahaGood day my friend, I believe I had replied you with a screenshot of all you submission. (with time-stamp and your position in the list). Sorry mate. The first 22/23 basically filled up within the first 10 minutes. That why it was quickly changed to a raffle style. I am selecting the with half raffle half fcfs now. Although it's impossible, I'm still trying hard to make everyone happy. For those submitted multiple times, the time-stamp of your first submission will supersede the later.
LOL. This whole thing is a f&#%ing mess! We can only laugh at it now. Over 100 submissions... Where did these people come from? HahaGood day my friend, I believe I had replied you with a screenshot of all you submission. (with time-stamp and your position in the list). Sorry mate. The first 22/23 basically filled up within the first 10 minutes. That why it was quickly changed to a raffle style. I am selecting the with half raffle half fcfs now. Although it's impossible, I'm still trying hard to make everyone happy. For those submitted multiple times, the time-stamp of your first submission will supersede the later.
CE is basically the reiteration of the original design. With the all the tooling made in the first run and less unforeseen issues, usually I was able to produce more. Got up pretty late today, I am heading out for lunch and will deal with all these later.
Having a nice week ahead guys. Cheers.
I know. It's an impossible situation. I hope you didn't take offense or think I was implying it was your fault. I think everyone here knows that your only intentions were to make folks happy. It's an awesome board and it deserves the outpouring of attention it's received.MoreLOL. This whole thing is a f&#%ing mess! We can only laugh at it now. Over 100 submissions... Where did these people come from? HahaGood day my friend, I believe I had replied you with a screenshot of all you submission. (with time-stamp and your position in the list). Sorry mate. The first 22/23 basically filled up within the first 10 minutes. That why it was quickly changed to a raffle style. I am selecting the with half raffle half fcfs now. Although it's impossible, I'm still trying hard to make everyone happy. For those submitted multiple times, the time-stamp of your first submission will supersede the later.
CE is basically the reiteration of the original design. With the all the tooling made in the first run and less unforeseen issues, usually I was able to produce more. Got up pretty late today, I am heading out for lunch and will deal with all these later.
Having a nice week ahead guys. Cheers.
LOL. This whole thing is a f&#%ing mess! We can only laugh at it now. Over 100 submissions... Where did these people come from? Haha
LOL. This whole thing is a f&#%ing mess! We can only laugh at it now. Over 100 submissions... Where did these people come from? HahaGood day my friend, I believe I had replied you with a screenshot of all you submission. (with time-stamp and your position in the list). Sorry mate. The first 22/23 basically filled up within the first 10 minutes. That why it was quickly changed to a raffle style. I am selecting the with half raffle half fcfs now. Although it's impossible, I'm still trying hard to make everyone happy. For those submitted multiple times, the time-stamp of your first submission will supersede the later.
CE is basically the reiteration of the original design. With the all the tooling made in the first run and less unforeseen issues, usually I was able to produce more. Got up pretty late today, I am heading out for lunch and will deal with all these later.
Having a nice week ahead guys. Cheers.
Not to mention all the lurkers from reddit.LOL. This whole thing is a f&#%ing mess! We can only laugh at it now. Over 100 submissions... Where did these people come from? Haha
You know there's been over 1k people logged into GH in the last 24h? Some of them like to buy keyboards.
where do we see our position in the list?Don't think it has been posted yet.
Whoah, that was quick, I wanted to wait for the results of the raffle (even though I know my raffle luck by know) to decide on whether to redeem or not, seems like the goo's are already gone.Show Image(http://uploads.tapatalk-cdn.com/20161128/26fef1682e563febb71d59dea19bc687.jpg)
Well that was incredibly quick! Thanks to Aconic and Yuktsi for being so damn diligent!
Sent from my iPhone using Tapatalk
That was the giveaway goo for Tokyo MeetupWhoah, that was quick, I wanted to wait for the results of the raffle (even though I know my raffle luck by know) to decide on whether to redeem or not, seems like the goo's are already gone.Show Image(http://uploads.tapatalk-cdn.com/20161128/26fef1682e563febb71d59dea19bc687.jpg)
Well that was incredibly quick! Thanks to Aconic and Yuktsi for being so damn diligent!
Sent from my iPhone using Tapatalk
I guess you just contacted yuktsi the moment you saw that post, right?
Hi peeps, here's the results. I've done my best to to include as many as possible, that includes taking out my 04/23. Please take appreciate it, wodan :(
Highlighted in green is fcfs and purple is raffle. Romevi and Beehatch were the participants of the very first Jane GB, I promised to guarantee them a slot in all future buy.
https://goo.gl/OW2wlA
Cheers. Gonna get some supper before invoicing. :blank:
That was the giveaway goo for Tokyo MeetupWhoah, that was quick, I wanted to wait for the results of the raffle (even though I know my raffle luck by know) to decide on whether to redeem or not, seems like the goo's are already gone.Show Image(http://uploads.tapatalk-cdn.com/20161128/26fef1682e563febb71d59dea19bc687.jpg)
Well that was incredibly quick! Thanks to Aconic and Yuktsi for being so damn diligent!
Sent from my iPhone using Tapatalk
I guess you just contacted yuktsi the moment you saw that post, right?
Hi peeps, here's the results. I've done my best to to include as many as possible, that includes taking out my 04/23. Please take appreciate it, wodan :(
Highlighted in green is fcfs and purple is raffle. Romevi and Beehatch were the participants of the very first Jane GB, I promised to guarantee them a slot in all future buy.
https://goo.gl/OW2wlA
Cheers. Gonna get some supper before invoicing. :blank:
I hope you are feeling better from flu. Let's hope that I can deliver the orders before the late January. :thumb:Hi peeps, here's the results. I've done my best to to include as many as possible, that includes taking out my 04/23. Please take appreciate it, wodan :(
Highlighted in green is fcfs and purple is raffle. Romevi and Beehatch were the participants of the very first Jane GB, I promised to guarantee them a slot in all future buy.
https://goo.gl/OW2wlA
Cheers. Gonna get some supper before invoicing. :blank:
Congrats to the winners. :thumb:
I sadly didn't get a shot (who would have thought that would happen /s). Let's hope CE happens soon and will be in a larger quantity (I think the time in which the form filled should have proved the point that people REALLY want this board).
I hope you are feeling better from flu. Let's hope that I can deliver the orders before the late January. :thumb:
congrats all, is there a waiting list already?I've have totally forgotten about that (I am indeed getting old), thank you for the reminder.
Thank you, i still have a little hope :) 10th in waiting list ^^congrats all, is there a waiting list already?I've have totally forgotten about that (I am indeed getting old), thank you for the reminder.
Updated to the same spreadsheet!
Gutted. My life has lost direction and meaning. :-\ Hope the CE comes along soon so I can get off the couch and wear something other than grey sweat pants. Kidding of course. Super bummed, but glad to know that such awesome boards are coming around these days. Perhaps I'll even draw in for one in 2017. Or 2018.Hug. Have you built your CP?
Congrats to the winners, hope you all enjoy these beauties! (On the bright side, I'm getting very good at saying that.) And congrats to Yuk Tsi on the success- clearly touched a nerve here with this one. FWIW, in my opinion it was far from a ****-show. Everything was done fairly, quickly and transparently. All I could ever want in a GB.
Gutted. My life has lost direction and meaning. :-\ Hope the CE comes along soon so I can get off the couch and wear something other than grey sweat pants. Kidding of course. Super bummed, but glad to know that such awesome boards are coming around these days. Perhaps I'll even draw in for one in 2017. Or 2018.Hug. Have you built your CP?
Congrats to the winners, hope you all enjoy these beauties! (On the bright side, I'm getting very good at saying that.) And congrats to Yuk Tsi on the success- clearly touched a nerve here with this one. FWIW, in my opinion it was far from a ****-show. Everything was done fairly, quickly and transparently. All I could ever want in a GB.
If you have the patience to wash and re lube the switches, vintage black all the way mate.Gutted. My life has lost direction and meaning. :-\ Hope the CE comes along soon so I can get off the couch and wear something other than grey sweat pants. Kidding of course. Super bummed, but glad to know that such awesome boards are coming around these days. Perhaps I'll even draw in for one in 2017. Or 2018.Hug. Have you built your CP?
Congrats to the winners, hope you all enjoy these beauties! (On the bright side, I'm getting very good at saying that.) And congrats to Yuk Tsi on the success- clearly touched a nerve here with this one. FWIW, in my opinion it was far from a ****-show. Everything was done fairly, quickly and transparently. All I could ever want in a GB.
Nope- waiting on that Zeal fella for some awesome 78g's... Also got in some vintage black switches and am debating about re-embracing my linear roots (first mech ever was a Das with reds) on the CP. With Zealios on the horizon think I'll wait and evaluate both. Will definitely post pics when I get it revved up- really looking forward to it. And thanks for the hug... one-armed bro hug right back atcha. :thumb:
As a waitlist plebeian, I have two wished:(http://cdn.smosh.com/sites/default/files/ftpuploads/bloguploads/I-know-that-feel-bro-blank.jpg)
1) Like 5 people drop out of the GB
OR
2) Have mercy on us for the CE GB.
I almost wish I never knew :'( Thanks for being quick and not leaving us hanging though!
Woohoooo super excited for this yuktsi! Thanks for allowing a few FCFS spots, it's one of the few things I can pull off versus winning raffles XD. Definitely excited to finally have a chance to expand my keyboard collection!haha 910 was initiated long time ago, so long that I can't remember myself. It's a layout that I really want for myself.
Also just a side point, I love how quickly this was able to go through from IC to GB, and to entry. One of the smoothest I've seen for sure.
Hi peeps, here's the results. I've done my best to to include as many as possible, that includes taking out my 04/23. Please take appreciate it, wodan :(****.
Highlighted in green is fcfs and purple is raffle. Romevi and Beehatch were the participants of the very first Jane GB, I promised to guarantee them a slot in all future buy.
https://goo.gl/OW2wlA
Cheers. Gonna get some supper before invoicing. :blank:
Edit: Raffles were done for every 10 submissions from the 11th onwards.
Woohoooo super excited for this yuktsi! Thanks for allowing a few FCFS spots, it's one of the few things I can pull off versus winning raffles XD. Definitely excited to finally have a chance to expand my keyboard collection!haha 910 was initiated long time ago, so long that I can't remember myself. It's a layout that I really want for myself.
Also just a side point, I love how quickly this was able to go through from IC to GB, and to entry. One of the smoothest I've seen for sure.
If you are following the the Tris IC thread, I think the very first prototype was posted back in March (?)
I think I already had 7 prototypes made before I went to the Tokyo meetup back in May. Hmmmmm.
Already got my layout planned ^-^If you are pressing the space with your right thumb, you might want to use the 2.25x on the right.
(Attachment Link)
Already got my layout planned ^-^
(Attachment Link)
Already got my layout planned ^-^
(Attachment Link)
Hi peeps, here's the results. I've done my best to to include as many as possible, that includes taking out my 04/23. Please take appreciate it, wodan :(not lucky to me :(
Highlighted in green is fcfs and purple is raffle. Romevi and Beehatch were the participants of the very first Jane GB, I promised to guarantee them a slot in all future buy.
https://goo.gl/OW2wlA
Cheers. Gonna get some supper before invoicing. :blank:
Edit: Raffles were done for every 10 submissions from the 11th onwards.
(Attachment Link)
Also made one :D
ISO FTW
(Attachment Link)
Also made one :D
ISO FTW
(Attachment Link)
Also made one :D
ISO FTW
Do not destroy your board like this pls
(Attachment Link)
Also made one :D
ISO FTW
one of the mods should ban you right now
The ISO people usually keep their sick fetish to themselves.
It's not just ISO ... it's AZERTY!
(psssshhh ... meet me in the alley, I'll show you where we ISO people hide)
Kinda curious, how tall is the front of the board say with the potential 1.5mm diffuser in it.20.5mm
Thanks for the fast reply. :)Kinda curious, how tall is the front of the board say with the potential 1.5mm diffuser in it.20.5mm
I'm not sure if this is allowed - and even less sure there's even a sliver of a chance of this working out, but:
If anyone is willing to give up their spot, I'm willing to pay way over GB-price for a spot on this, or trade for a combination of a Nuclear Data set + PayPal.
I can't let my dreams be dreams. I wants this and I needs this. Anyone who can make this possible earns a spot in my heart :*
I'm not sure if this is allowed - and even less sure there's even a sliver of a chance of this working out, but:
If anyone is willing to give up their spot, I'm willing to pay way over GB-price for a spot on this, or trade for a combination of a Nuclear Data set + PayPal.
I can't let my dreams be dreams. I wants this and I needs this. Anyone who can make this possible earns a spot in my heart :*
Wait on the CE group buy man, yuktsi mentioned it earlier in the thread that there will be another run of these.
I'm not sure if this is allowed - and even less sure there's even a sliver of a chance of this working out, but:
If anyone is willing to give up their spot, I'm willing to pay way over GB-price for a spot on this, or trade for a combination of a Nuclear Data set + PayPal.
I can't let my dreams be dreams. I wants this and I needs this. Anyone who can make this possible earns a spot in my heart :*
Wait on the CE group buy man, yuktsi mentioned it earlier in the thread that there will be another run of these.
I would if I could, but with the amount of luck I have in general, once in a blue moon would be too likely for me to get one.
Just wondering, are the CE group buys also limited quantity? i wasn't around for the previous group buys :D
I'm not sure if this is allowed - and even less sure there's even a sliver of a chance of this working out, but:
If anyone is willing to give up their spot, I'm willing to pay way over GB-price for a spot on this, or trade for a combination of a Nuclear Data set + PayPal.
I can't let my dreams be dreams. I wants this and I needs this. Anyone who can make this possible earns a spot in my heart :*
Wait on the CE group buy man, yuktsi mentioned it earlier in the thread that there will be another run of these.
I would if I could, but with the amount of luck I have in general, once in a blue moon would be too likely for me to get one.
With two posts in your count it doesn't seem you've been around much, especially having registered only two months ago. Have you entered much?
Just wondering, are the CE group buys also limited quantity? i wasn't around for the previous group buys :D
All of yuktsi's boards are limited in quantity.
I'm not sure if this is allowed - and even less sure there's even a sliver of a chance of this working out, but:
If anyone is willing to give up their spot, I'm willing to pay way over GB-price for a spot on this, or trade for a combination of a Nuclear Data set + PayPal.
I can't let my dreams be dreams. I wants this and I needs this. Anyone who can make this possible earns a spot in my heart :*
Wait on the CE group buy man, yuktsi mentioned it earlier in the thread that there will be another run of these.
I would if I could, but with the amount of luck I have in general, once in a blue moon would be too likely for me to get one.
With two posts in your count it doesn't seem you've been around much, especially having registered only two months ago. Have you entered much?
I tried my fair share of raffles, but missed most of the things I was interested in. I've lurked for a while but didn't feel the need for an account until recently, when I started to migrate from Reddit.
Just wondering, are the CE group buys also limited quantity? i wasn't around for the previous group buys :D
All of yuktsi's boards are limited in quantity.
I'm hoping that 910 CE will be a larger limited quantity then (even if it means x amount rounds of shipping... I'd even wait a year from payment if necessary). I'm still kinda bummed I missed this...
All of yuktsi's boards are limited in quantity.Guess I'll just have to be a little faster next time :)
All of yuktsi's boards are limited in quantity.Guess I'll just have to be a little faster next time :)
All of yuktsi's boards are limited in quantity.Guess I'll just have to be a little faster next time :)
I remember his first sale selling out in about four hours. I thought that was fast! :))
But but but but........the best part is the low board count :blank:I'm not gonna meet anyone in real life with a custom so I'll never have the same board as anyone I meet anyways :D.
But but but but........the best part is the low board count :blank:I'm not gonna meet anyone in real life with a custom so I'll never have the same board as anyone I meet anyways :D.
Also forgot to ask, but what color should we expect the PCB to be?
Also forgot to ask, but what color should we expect the PCB to be?My personal favourite is yellow. I am trying purple and teal.
Just wondering, are the CE group buys also limited quantity? i wasn't around for the previous group buys :DThere were total of 60 Jane CE made.
There were total of 60 CE made.Oh, that's much more than I thought :D
25 with short brass, 25 long brass and 10 with external long brass.
I'm not sure if this is allowed - and even less sure there's even a sliver of a chance of this working out, but:There's a long waiting list, I wouldn't allow anyone to transfer their spot.
If anyone is willing to give up their spot, I'm willing to pay way over GB-price for a spot on this, or trade for a combination of a Nuclear Data set + PayPal.
I can't let my dreams be dreams. I wants this and I needs this. Anyone who can make this possible earns a spot in my heart :*
I should expect 50 units for 910 CE. But I doubt if there's still that people interested by then.
I should expect 50 units for 910 CE. But I doubt if there's still that people interested by then.
Also forgot to ask, but what color should we expect the PCB to be?My personal favourite is yellow. I am trying purple and teal.
Worse comes to worst, you will get a black one.
Ooh, purple sounds great, especially after changing my top to violet.
Also, just paid. Thanks, yuktsi, for an opportunity to get this amazing board!
Dunno, black would work with everything, whereas the others won't, but since I take a blue bottom, i'd love a Teal PCB :D
Dunno, black would work with everything, whereas the others won't, but since I take a blue bottom, i'd love a Teal PCB :D
Black PCBs are so boring though, it's almost like having a green pcb
Dunno, black would work with everything, whereas the others won't, but since I take a blue bottom, i'd love a Teal PCB :D
Black PCBs are so boring though, it's almost like having a green pcb
Green is definitely the worst :confused: at least black is the most subtle and matches everything haha
Im in for CE as well!! Any approximate eta?money burning a massive hole in my pocket. my leg is basically bacon
Im in for CE as well!! Any approximate eta?money burning a massive hole in my pocket. my leg is basically bacon
.
.
.
I should expect 50 units for 910 CE. But I doubt if there's still that people interested by then.
.
.
.
psssssttt.. psssssttt.. along with TGR 910CE, yuktsi will also release TGR 911
yeah, some sort of 75%. :rolleyes:psssssttt.. psssssttt.. along with TGR 910CE, yuktsi will also release TGR 911
Tantalizing. And TGR 911 ---> 75%?
yeah, some sort of 75%. :rolleyes:psssssttt.. psssssttt.. along with TGR 910CE, yuktsi will also release TGR 911
Tantalizing. And TGR 911 ---> 75%?
AFAIK TGR911 is not 75%, its RS78 layout:thumb: :thumb: :thumb:
AFAIK TGR911 is not 75%, its RS78 layout
hey yuktski, do you have an ETA on 910-CE? i want to prepare my wallet for it :(
Any updates to the current GB? Itching to start a new build ;DAlso want to know how it goes ;)
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(Great news, thanks for updating
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.
I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.
AFAIK TGR911 is not 75%, its RS78 layoutnot RS78 bro. Shhhhhh
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.
I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.
edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.
Hmmm... Should I wait? Or should I get RS78 that is currently running on Massdrop?AFAIK TGR911 is not 75%, its RS78 layoutnot RS78 bro. ShhhhhhShow Image(http://www.floppingaces.net/wp-content/uploads/2013/06/obama-shhh.jpg)
edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.
I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.
edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.
edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.
Wait what? Not happening soon or not happening at all? And what about the last part? I don't really understand.
I need one of the 910s or 910CE's or 910R2 or whatever 910 style thing you will make though. I don't mind waiting (even if it's one year or longer), but I'd love to get one (and I won't buy in the aftermarket for a markup).
I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.Oh nooo, sadness
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.Only 5? 😵
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Well, if you think that you can compare them, you should definitely choose rs78 ;)Hmmm... Should I wait? Or should I get RS78 that is currently running on Massdrop?AFAIK TGR911 is not 75%, its RS78 layoutnot RS78 bro. ShhhhhhShow Image(http://www.floppingaces.net/wp-content/uploads/2013/06/obama-shhh.jpg)
I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.
I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.
edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.
I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom).
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.
I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.
edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.
whip em to work faster
:D
good updates!
I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.How/Where will it be announced when these special 5 go on sale? Also, you should just raffle the current wait list on the spreadsheet for the last 5 :thumb:
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
I want to believe I still have a chance to get one.I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.How/Where will it be announced when these special 5 go on sale? Also, you should just raffle the current wait list on the spreadsheet for the last 5 :thumb:
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom).
I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.How/Where will it be announced when these special 5 go on sale? Also, you should just raffle the current wait list on the spreadsheet for the last 5 :thumb:
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
yeah, that's probably the best way. hmmmI've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom).I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.How/Where will it be announced when these special 5 go on sale? Also, you should just raffle the current wait list on the spreadsheet for the last 5 :thumb:
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Just make a raffle for everyone to make it fair :3
Managed to snap some progress pic today. Nothing much to show really.
Basically they are running the last process for the top and bottom case.
Next step would be anodizing the cases and milling the brass.Show Image(http://i.imgur.com/ka1Iu5s.jpg)Show Image(http://i.imgur.com/dHEeG8P.jpg)Show Image(http://i.imgur.com/3cU27Fg.jpg)Show Image(http://i.imgur.com/jTcZhP5.jpg)Show Image(http://i.imgur.com/vqufk48.jpg)Show Image(http://i.imgur.com/h2TDUf9.jpg)Show Image(http://i.imgur.com/5XA0ZCq.jpg)Show Image(http://i.imgur.com/n9G5Abj.jpg)Show Image(http://i.imgur.com/F0y3dIp.jpg)
I agree except only if I get oneI've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom).I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.How/Where will it be announced when these special 5 go on sale? Also, you should just raffle the current wait list on the spreadsheet for the last 5 :thumb:
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Just make a raffle for everyone to make it fair :3
I agree except only if I get oneI've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom).I've 5 units of CE made in order to meet the MOQ for anodising. Will have these units for sale later.How/Where will it be announced when these special 5 go on sale? Also, you should just raffle the current wait list on the spreadsheet for the last 5 :thumb:
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Just make a raffle for everyone to make it fair :3
How about some news?
Is 1.25/1.25/1.25/6.25/1.5/1 bottom row possible? Just want to know if I can fit a 1u Fn somewhere in there :)
Is 1.25/1.25/1.25/6.25/1.5/1 bottom row possible? Just want to know if I can fit a 1u Fn somewhere in there :)
http://i.imgur.com/egLkQZa.jpg
Updates
Order list - https://goo.gl/OW2wlA
29/11/16 - Invoicing (done)
02/12/16 - Payment received (done)
09/12/16 - Material arrival
12/12/16 - 06/01/17 Machining
12/01/17 - 27/01/17 Anodizing
05/02/17 - Shipping
The parts are still being prep for anodizing.Updates
Order list - https://goo.gl/OW2wlA
29/11/16 - Invoicing (done)
02/12/16 - Payment received (done)
09/12/16 - Material arrival
12/12/16 - 06/01/17 Machining
12/01/17 - 27/01/17 Anodizing
05/02/17 - Shipping
Any news on an updated timeline?
Also wondering if there are updates on the 5 additional CE up for grabs or if I missed em :D
Still hanging out on the chance of getting this fantastic board.Also wondering if there are updates on the 5 additional CE up for grabs or if I missed em :D
yeah i would really love one of these
Also wondering if there are updates on the 5 additional CE up for grabs or if I missed em :D
yeah i would really love one of these
Also wondering if there are updates on the 5 additional CE up for grabs or if I missed em :DAlso waiting for this
is this the best place to catch a chance at leftovers?Perhaps. Yuktsi mentioned that he does 5 extra CE versions, but if you look at the list in OP, you will notice a waitlist
is this the best place to catch a chance at leftovers?Perhaps. Yuktsi mentioned that he does 5 extra CE versions, but if you look at the list in OP, you will notice a waitlist
is this the best place to catch a chance at leftovers?Perhaps. Yuktsi mentioned that he does 5 extra CE versions, but if you look at the list in OP, you will notice a waitlist
I don't see this waitlist or any mention of a waitlist in OP.
Hi guys, all the boards are in the middle of anodizing now. They will ready soon and I hope I can start shipping in April. One of good friends had some sleeves made for me, if the cost is affordable, I will order some to ship with the 910.
Enjoy your weekend people. Cheers.Show Image(http://i.imgur.com/iWeBjkS.jpg)
Hi guys, all the boards are in the middle of anodizing now. They will ready soon and I hope I can start shipping in April. One of good friends had some sleeves made for me, if the cost is affordable, I will order some to ship with the 910.
Enjoy your weekend people. Cheers.Show Image(http://i.imgur.com/iWeBjkS.jpg)
Hi guys, all the boards are in the middle of anodizing now. They will ready soon and I hope I can start shipping in April. One of good friends had some sleeves made for me, if the cost is affordable, I will order some to ship with the 910.Thanks for the update Sam :thumb:
Enjoy your weekend people. Cheers.Show Image(http://i.imgur.com/iWeBjkS.jpg)
Hi yuktsi, any updates? :)Still in the process of anodizing :(
Hey Yuktsi, I sent you a pm regarding taking over an order.Hi yuktsi, any updates? :)Still in the process of anodizing :(
Replied =DHey Yuktsi, I sent you a pm regarding taking over an order.Hi yuktsi, any updates? :)Still in the process of anodizing :(
Good news peeps. The anodizing factory just called, coating for sky blue and violet are done, grey and black are at 50%. I will stop by to collect them tmr. Thank you.Sir, what about the pink ones?
What software is that model designed in?
Sorry I meant the CAD model in the picture.What software is that model designed in?
What? If youre asking about the firmware of the pcb its ps2avrgb so bootmapper
SolidworksSorry I meant the CAD model in the picture.What software is that model designed in?
What? If youre asking about the firmware of the pcb its ps2avrgb so bootmapper
They've yet to start on pink and silver I suppose. Will check with them when I'm there tomorrow.Good news peeps. The anodizing factory just called, coating for sky blue and violet are done, grey and black are at 50%. I will stop by to collect them tmr. Thank you.Sir, what about the pink ones?
Extras?? :DThey've yet to start on pink and silver I suppose. Will check with them when I'm there tomorrow.Good news peeps. The anodizing factory just called, coating for sky blue and violet are done, grey and black are at 50%. I will stop by to collect them tmr. Thank you.Sir, what about the pink ones?
Show Image(http://i.imgur.com/z2RQADN.jpg)
Anodizing is done! Long weekend ahead to check on the parts.
Show Image(http://i.imgur.com/z2RQADN.jpg)
Anodizing is done! Long weekend ahead to check on the parts.
Show Image(http://i.imgur.com/z2RQADN.jpg)
Anodizing is done! Long weekend ahead to check on the parts.
yes bbShow Image(http://i.imgur.com/z2RQADN.jpg)
Anodizing is done! Long weekend ahead to check on the parts.
is that for all colors? :eek:
Great!!!!yes bbShow Image(http://i.imgur.com/z2RQADN.jpg)
Anodizing is done! Long weekend ahead to check on the parts.
is that for all colors? :eek:
Great news.Thanks for updating Sam :p :pShow Image(http://i.imgur.com/z2RQADN.jpg)
Anodizing is done! Long weekend ahead to check on the parts.
what about the weights? i hope you have finalized the design of the weight inserts and sent it for manufacturing:blank:
what about the weights? i hope you have finalized the design of the weight inserts and sent it for manufacturing:blank:
How are the parts looking yuktsi? :)Most of them look really good, except for a few that require some rework. I really like the soft/smooth kinda finishing.
How are the parts looking yuktsi? :)Most of them look really good, except for a few that require some rework. I really like the soft/smooth kinda finishing.Show Image(http://i.imgur.com/twYZ8yp.jpg)Show Image(http://i.imgur.com/SNBE41a.jpg)Show Image(http://i.imgur.com/LZUsxuo.jpg)Show Image(http://i.imgur.com/z5QFRMI.jpg)
Potato:MoreShow Image(http://i.imgur.com/H2oi4a3h.jpg)
Show Image(http://i.imgur.com/H2oi4a3h.jpg)
Holy crap, That Miami colorway :eek:
Anyone noticed TGR Alice in yuktsi footer ;) ?????Holy crap, That Miami colorway :eek:
This one looks gorgeous, indeed! :cool:
Anyone noticed TGR Alice in yuktsi footer ;) ?????Holy crap, That Miami colorway :eek:
This one looks gorgeous, indeed! :cool:
looking good :thumb:
kinda want one :'(
How are the parts looking yuktsi? :)Most of them look really good, except for a few that require some rework. I really like the soft/smooth kinda finishing.Show Image(http://i.imgur.com/twYZ8yp.jpg)Show Image(http://i.imgur.com/SNBE41a.jpg)Show Image(http://i.imgur.com/LZUsxuo.jpg)Show Image(http://i.imgur.com/z5QFRMI.jpg)
Potato:MoreShow Image(http://i.imgur.com/H2oi4a3h.jpg)
just cum in my pants a little.:'( :'(
That Miami combo looks cool! Makes me kinda wish I went for more of a risky color combo haha
I went with black top and violet bottom, couldn't go wrong with it since it looked great in the sampleThat Miami combo looks cool! Makes me kinda wish I went for more of a risky color combo haha
What did you get?
Has there been any update on the extras?Not until the GB is delivered. I am sorry mate =/
Or if anyone wants to sell then let me know!
Thanks
Was there any update on those lovely sleeves from a few posts back? :cool:Yeah, all 910 will come with the sleeve. But since I am not paying for them, I am not sure what color will they be in =/
Was there any update on those lovely sleeves from a few posts back? :cool:Yeah, all 910 will come with the sleeve. But since I am not paying for them, I am not sure what color will they be in =/
Was there any update on those lovely sleeves from a few posts back? :cool:Yeah, all 910 will come with the sleeve. But since I am not paying for them, I am not sure what color will they be in =/
Was there any update on those lovely sleeves from a few posts back? :cool:Yeah, all 910 will come with the sleeve. But since I am not paying for them, I am not sure what color will they be in =/
Hi Yuktsi, any timeline for shipping schedule? Can't wait to have it in our hands :)I am still waiting on the sleeves and anodizing for the plate. Earliest should be mid June =/
Any updates, Yuktsi?I am shipping yours to your assembly guy this week. :thumb:
:thumb:Any updates, Yuktsi?I am shipping yours to your assembly guy this week. :thumb:
Any updates, Yuktsi?I am shipping yours to your assembly guy this week. :thumb:
Any updates, Yuktsi?I am shipping yours to your assembly guy this week. :thumb:
ooooooo eggsciting :eek:Are you sure you got one? It seems that you missed the raffle
ooooooo eggsciting :eek:Are you sure you got one? It seems that you missed the raffle
Hahaha
Sent from my Pixel using Tapatalk
Oooh... Exciting. :eek:Haha I know, it's our jokeooooooo eggsciting :eek:Are you sure you got one? It seems that you missed the raffle
Hahaha
Sent from my Pixel using Tapatalk
Yah; he's numero 6 on the list.
Oooh... Exciting. :eek:Haha I know, it's our jokeooooooo eggsciting :eek:Are you sure you got one? It seems that you missed the raffle
Hahaha
Sent from my Pixel using Tapatalk
Yah; he's numero 6 on the list.
Pretty sure he got it
Sent from my Pixel using Tapatalk
But, I didn't use "mam" jokeOooh... Exciting. :eek:Haha I know, it's our jokeooooooo eggsciting :eek:Are you sure you got one? It seems that you missed the raffle
Hahaha
Sent from my Pixel using Tapatalk
Yah; he's numero 6 on the list.
Pretty sure he got it
Sent from my Pixel using Tapatalk
You two have crappy humor.
But, I didn't use "mam" jokeOooh... Exciting. :eek:Haha I know, it's our jokeooooooo eggsciting :eek:Are you sure you got one? It seems that you missed the raffle
Hahaha
Sent from my Pixel using Tapatalk
Yah; he's numero 6 on the list.
Pretty sure he got it
Sent from my Pixel using Tapatalk
You two have crappy humor.
Sent from my Pixel using Tapatalk
Any chance om the extras or that still undecided?Not decided. It will take a little while more to decide. Sorry mate.
Just making sure that you have my email to send shipping invoice since I took over xondat's spot and don't see it on order list :)Any chance om the extras or that still undecided?Not decided. It will take a little while more to decide. Sorry mate.
This is currently my candidate for my personal "Custom of the Year 2017" and I had some intense **** going on this year.
Update!OMG! OMG! It's happening! Can't wait to get a shipping invoice from you.
Compare to my very first Jane group buy that I did back then, this is certainly not a very smooth run. Looking back at my Jane from the first group buy, tbh I'm quite happy with the progress in quality. Not perfect still, but it is much much closer to what I would expect from a good custom. I guess it is worth some of the sleepless nights and the "fights" with the manufacturers. I would like to thank you guys for being patient with me.
There are 40 sets of 910 made (not including VKC), 23 units for the GB here and 17 units of special edition for friends. Having unit no. CNC milled to all the parts did make the whole fabrication/color matching/sorting process much more complicated than I thought, this probably my last time doing so. Eight units from the group buy do have some issues. The manufacturer is not going to replace because these flaws seemed pretty common to them, in a way I do agree with them. I will update to the group buy list later, the affected ones are mostly gray/black parts. Reproduction/rework is in progress for these eight units. Being a collector myself, I am not comfortable with sending them out.
And oh yeah, the packaging. Knowing how fragile these aluminum boards can be, I often over pack them. 25mm of PE form for the top and bottom, at least 55mm for the sides. The sleeve is a courtesy from my friend. Considering this is her first time operating the sewing machine, I would say it is not too bad. Here's some photo to those of you who haven't received a board from me before.Show Image(http://i.imgur.com/otg4IKsl.jpg)Show Image(http://i.imgur.com/b395no4l.jpg)
Once again, thank you!
Update!
Compare to my very first Jane group buy that I did back then, this is certainly not a very smooth run. Looking back at my Jane from the first group buy, tbh I'm quite happy with the progress in quality. Not perfect still, but it is much much closer to what I would expect from a good custom. I guess it is worth some of the sleepless nights and the "fights" with the manufacturers. I would like to thank you guys for being patient with me.
There are 40 sets of 910 made (not including VKC), 23 units for the GB here and 17 units of special edition for friends. Having unit no. CNC milled to all the parts did make the whole fabrication/color matching/sorting process much more complicated than I thought, this probably my last time doing so. Eight units from the group buy do have some issues. The manufacturer is not going to replace because these flaws seemed pretty common to them, in a way I do agree with them. I will update to the group buy list later, the affected ones are mostly gray/black parts. Reproduction/rework is in progress for these eight units. Being a collector myself, I am not comfortable with sending them out.
And oh yeah, the packaging. Knowing how fragile these aluminum boards can be, I often over pack them. 25mm of PE form for the top and bottom, at least 55mm for the sides. The sleeve is a courtesy from my friend. Considering this is her first time operating the sewing machine, I would say it is not too bad. Here's some photo to those of you who haven't received a board from me before.Show Image(http://i.imgur.com/otg4IKsl.jpg)Show Image(http://i.imgur.com/b395no4l.jpg)
Once again, thank you!
Update!
Compare to my very first Jane group buy that I did back then, this is certainly not a very smooth run. Looking back at my Jane from the first group buy, tbh I'm quite happy with the progress in quality. Not perfect still, but it is much much closer to what I would expect from a good custom. I guess it is worth some of the sleepless nights and the "fights" with the manufacturers. I would like to thank you guys for being patient with me.
There are 40 sets of 910 made (not including VKC), 23 units for the GB here and 17 units of special edition for friends. Having unit no. CNC milled to all the parts did make the whole fabrication/color matching/sorting process much more complicated than I thought, this probably my last time doing so. Eight units from the group buy do have some issues. The manufacturer is not going to replace because these flaws seemed pretty common to them, in a way I do agree with them. I will update to the group buy list later, the affected ones are mostly gray/black parts. Reproduction/rework is in progress for these eight units. Being a collector myself, I am not comfortable with sending them out.
And oh yeah, the packaging. Knowing how fragile these aluminum boards can be, I often over pack them. 25mm of PE form for the top and bottom, at least 55mm for the sides. The sleeve is a courtesy from my friend. Considering this is her first time operating the sewing machine, I would say it is not too bad. Here's some photo to those of you who haven't received a board from me before.Show Image(http://i.imgur.com/otg4IKsl.jpg)Show Image(http://i.imgur.com/b395no4l.jpg)
Once again, thank you!
Tiny dents at the sharp edges. My guess is because of these are the standard colors, the workers didn't handle with extra cares.Update!
Compare to my very first Jane group buy that I did back then, this is certainly not a very smooth run. Looking back at my Jane from the first group buy, tbh I'm quite happy with the progress in quality. Not perfect still, but it is much much closer to what I would expect from a good custom. I guess it is worth some of the sleepless nights and the "fights" with the manufacturers. I would like to thank you guys for being patient with me.
There are 40 sets of 910 made (not including VKC), 23 units for the GB here and 17 units of special edition for friends. Having unit no. CNC milled to all the parts did make the whole fabrication/color matching/sorting process much more complicated than I thought, this probably my last time doing so. Eight units from the group buy do have some issues. The manufacturer is not going to replace because these flaws seemed pretty common to them, in a way I do agree with them. I will update to the group buy list later, the affected ones are mostly gray/black parts. Reproduction/rework is in progress for these eight units. Being a collector myself, I am not comfortable with sending them out.
And oh yeah, the packaging. Knowing how fragile these aluminum boards can be, I often over pack them. 25mm of PE form for the top and bottom, at least 55mm for the sides. The sleeve is a courtesy from my friend. Considering this is her first time operating the sewing machine, I would say it is not too bad. Here's some photo to those of you who haven't received a board from me before.Show Image(http://i.imgur.com/otg4IKsl.jpg)Show Image(http://i.imgur.com/b395no4l.jpg)
Once again, thank you!
Out of curiosity, what kinds of flaws/issues are you seeing on the affected boards?
Just putting my hat in the ring saying I'm up for extras. Hope I can get in on this. That blue and pink combo is delicious.
Looking forward to seeing these start to appear.
Also waiting here. Really excited!
What switches are you all planning on using? I can't decide if I want to wait on that MX Silent Black group buy or just throw some 67g Zealios in mine.
Also waiting here. Really excited!
What switches are you all planning on using? I can't decide if I want to wait on that MX Silent Black group buy or just throw some 67g Zealios in mine.
Update!
Compare to my very first Jane group buy that I did back then, this is certainly not a very smooth run. Looking back at my Jane from the first group buy, tbh I'm quite happy with the progress in quality. Not perfect still, but it is much much closer to what I would expect from a good custom. I guess it is worth some of the sleepless nights and the "fights" with the manufacturers. I would like to thank you guys for being patient with me.
There are 40 sets of 910 made (not including VKC), 23 units for the GB here and 17 units of special edition for friends. Having unit no. CNC milled to all the parts did make the whole fabrication/color matching/sorting process much more complicated than I thought, this probably my last time doing so. Eight units from the group buy do have some issues. The manufacturer is not going to replace because these flaws seemed pretty common to them, in a way I do agree with them. I will update to the group buy list later, the affected ones are mostly gray/black parts. Reproduction/rework is in progress for these eight units. Being a collector myself, I am not comfortable with sending them out.
And oh yeah, the packaging. Knowing how fragile these aluminum boards can be, I often over pack them. 25mm of PE form for the top and bottom, at least 55mm for the sides. The sleeve is a courtesy from my friend. Considering this is her first time operating the sewing machine, I would say it is not too bad. Here's some photo to those of you who haven't received a board from me before.Show Image(http://i.imgur.com/otg4IKsl.jpg)Show Image(http://i.imgur.com/b395no4l.jpg)
Once again, thank you!
I guess I got lucky and was one of the first ones to arrive!Show Image(http://i.imgur.com/SSXoozw.jpg)Show Image(http://i.imgur.com/i9isrdS.jpg)Show Image(http://i.imgur.com/2GvgIBm.jpg)Show Image(http://i.imgur.com/ChbKbCl.jpg)
Looks absolutely amazing, thanks again yuktsi. Can't wait to build this up soon.
I guess I got lucky and was one of the first ones to arrive!Show Image(http://i.imgur.com/SSXoozw.jpg)Show Image(http://i.imgur.com/i9isrdS.jpg)Show Image(http://i.imgur.com/2GvgIBm.jpg)Show Image(http://i.imgur.com/ChbKbCl.jpg)
Looks absolutely amazing, thanks again yuktsi. Can't wait to build this up soon.
I guess I got lucky and was one of the first ones to arrive!Show Image(http://i.imgur.com/SSXoozw.jpg)Show Image(http://i.imgur.com/i9isrdS.jpg)Show Image(http://i.imgur.com/2GvgIBm.jpg)Show Image(http://i.imgur.com/ChbKbCl.jpg)
Looks absolutely amazing, thanks again yuktsi. Can't wait to build this up soon.
ahhhhhhhHHHHHH can't wait for mine :-X
I have about 10 more boards to ship. Hopeing to have all shipped by Tuesday or Wednesday. Will invoice for the shipping during weekend.
Cheers.
I have about 10 more boards to ship. Hopeing to have all shipped by Tuesday or Wednesday. Will invoice for the shipping during weekend.
Cheers.
I have about 10 more boards to ship. Hopeing to have all shipped by Tuesday or Wednesday. Will invoice for the shipping during weekend.
Cheers.
quick potato pictoo damn jellyShow Image(http://i.imgur.com/7qp92br.jpg)
I guess I got lucky and was one of the first ones to arrive!Damnnnn that's good looking. We have the exact opposite colour choice!Show Image(http://i.imgur.com/SSXoozw.jpg)Show Image(http://i.imgur.com/i9isrdS.jpg)Show Image(http://i.imgur.com/2GvgIBm.jpg)Show Image(http://i.imgur.com/ChbKbCl.jpg)
Looks absolutely amazing, thanks again yuktsi. Can't wait to build this up soon.
Potato pics.. thanks for such amazing board Yuktsi, top notch quality :thumb:Please, take photo of bottom ;)
Definitely count me in for your next project :)
(Attachment Link) (Attachment Link)
Great work yuktsi :thumb: Here's a pic of the 910 SE bootyShow Image(http://i.imgur.com/J56aPN9.jpg)
Wow those booties are 👌
I THINK MINE IS COMING TMRW :-X :eek:no.
I THINK MINE IS COMING TMRW :-X :eek:no.
Great work yuktsi :thumb: Here's a pic of the 910 SE bootyShow Image(http://i.imgur.com/J56aPN9.jpg)
How many flavors of 910 boards do exist: VKC, 910 and 910 SE?
There are 40 sets of 910 made (not including VKC), 23 units for the GB here and 17 units of special edition for friends.
17 as well.How many flavors of 910 boards do exist: VKC, 910 and 910 SE?There are 40 sets of 910 made (not including VKC), 23 units for the GB here and 17 units of special edition for friends.
Not sure how many VKC though.
I never got a shipping invoice and still no 910.... did I miss your email? PM me please! Thanks again. I'm super stoked for my 910.Hi bro, just packed your board and already sent you the invoice.
Sent from my iPhone using Tapatalk
Status of all 910Great news about the CE, I know a few of us who barely missed out were put on a wait list, will that give us any priority given it will still be limited?
https://goo.gl/NnFV4o
Shipping
- The last 5 boards will be dropped off at the post office by Wednesday, before the long weekend. Shipping invoices had been all sent.
Delayed units
- Units are being made to replace the damaged parts. I was hoping to fix the dented parts, but the results are rather unsatisfactory.
- The process is rather tedious because all parts come with a unique unit number. Machining for the replacement parts are done, just waiting for me to collect and send of anodization.
910 CE
- Unfortunately, I am afraid that I will need to do a quick run of 910 CE. I managed to get a discount for the machining of the replacement parts. The owner of the anodizing factory agreed to anodize them for free because dented parts were all caused by their mishandling. But the cost is still rather significant.
- I am thinking of making another 23 units of the CE, available only in black or gray (or both) and brass plate. Hope to conclude the CE project within 2 months time. Will put up interest check form later.
- 910 is one of my favorite boards when it comes to typing feel, a little surprising to me considering the number of boards I have in my collection (k, I know self praise is no praise). Will definitely make more of these from time to time.
Great news about the CE, I know a few of us who barely missed out were put on a wait list, will that give us any priority given it will still be limited?
I should be able to prioritize those on the wait list. The thing about purple is that the factory that I use don't run that color very often, other than the MOQ, my concern is that if anything goes wrong, they might not want to redo the parts in purple.Status of all 910Great news about the CE, I know a few of us who barely missed out were put on a wait list, will that give us any priority given it will still be limited?
https://goo.gl/NnFV4o
Shipping
- The last 5 boards will be dropped off at the post office by Wednesday, before the long weekend. Shipping invoices had been all sent.
Delayed units
- Units are being made to replace the damaged parts. I was hoping to fix the dented parts, but the results are rather unsatisfactory.
- The process is rather tedious because all parts come with a unique unit number. Machining for the replacement parts are done, just waiting for me to collect and send of anodization.
910 CE
- Unfortunately, I am afraid that I will need to do a quick run of 910 CE. I managed to get a discount for the machining of the replacement parts. The owner of the anodizing factory agreed to anodize them for free because dented parts were all caused by their mishandling. But the cost is still rather significant.
- I am thinking of making another 23 units of the CE, available only in black or gray (or both) and brass plate. Hope to conclude the CE project within 2 months time. Will put up interest check form later.
- 910 is one of my favorite boards when it comes to typing feel, a little surprising to me considering the number of boards I have in my collection (k, I know self praise is no praise). Will definitely make more of these from time to time.
also shame no purple but totally understand to keep colors limited. if it was up to me everything I owned would be purple
I should be able to prioritize those on the wait list. The thing about purple is that the factory that I use don't run that color very often, other than the MOQ, my concern is that if anything goes wrong, they might not want to redo the parts in purple.
Why is 19mm the perfect minimum thickness?Show Image(http://i.imgur.com/8pGIAev.png)
This is actually a rather interesting topic. I got most of the dimensions by hand measuring the boards I have. 19mm is actually what I captured from the OTD boards. Boards from LZ, Lynn are all measured at around 19mm. Anything more than this range feels rather uncomfortable to me. Even for KMAC, which is measured at around 20mm. I don't remember measuring any board lower than 19mm though.Why is 19mm the perfect minimum thickness?Show Image(http://i.imgur.com/8pGIAev.png)
Great question, I personally wasn't too confident with going under 20mm tbh.
7.5mm over the plate for covering the switches, 9.5mm from the ledge the plate mounts to to the start of the bottom for enough PCB clearance and 3mm from there to the bottom face so there's more than enough clearance for the screws in case someone wants to use a different standard.
That 1mm difference could easily be shaved off on the lower housing by removing the generous headroom for screws in my case, but I digress.
This is actually a rather interesting topic. I got most of the dimensions by hand measuring the boards I have. 19mm is actually what I captured from the OTD boards. Boards from LZ, Lynn are all measured at around 19mm. Anything more than this range feels rather uncomfortable to me. Even for KMAC, which is measured at around 20mm. I don't remember measuring any board lower than 19mm though.
I have 7mm over the plate, 10mm from the face of the plate to the internal of the bottom case. My clearance from there to the bottom face is around 3mm as well. I suppose I can go another mm lower if I were to remove the brass weight.Show Image(http://i.imgur.com/Wza7jmF.png)
Status of all 910
https://goo.gl/NnFV4o
Shipping
- The last 5 boards will be dropped off at the post office by Wednesday, before the long weekend. Shipping invoices had been all sent.
Delayed units
- Units are being made to replace the damaged parts. I was hoping to fix the dented parts, but the results are rather unsatisfactory.
- The process is rather tedious because all parts come with a unique unit number. Machining for the replacement parts are done, just waiting for me to collect and send of anodization.
910 CE
- Unfortunately, I am afraid that I will need to do a quick run of 910 CE. I managed to get a discount for the machining of the replacement parts. The owner of the anodizing factory agreed to anodize them for free because dented parts were all caused by their mishandling. But the cost is still rather significant.
- I am thinking of making another 23 units of the CE, available only in black or gray (or both) and brass plate. Hope to conclude the CE project within 2 months time. Will put up interest check form later.
- 910 is one of my favorite boards when it comes to typing feel, a little surprising to me considering the number of boards I have in my collection (k, I know self praise is no praise). Will definitely make more of these from time to time.
910 CE
-Unfortunately, I amafraidhappy thatIYuktsi will need to do a quick run of 910 CE.
I built mine last night :) It was very straight forward to build. I used 55g vintage blacks and JTK pink on black. Amazing job yuktsi, you can really feel the quality in this board.Great looking!!! Thinking about jtk white-pink for my full pink 910.Show Image(http://i.imgur.com/mnYKlA6.jpg)Show Image(http://i.imgur.com/o6iZtlV.jpg)Show Image(http://i.imgur.com/nEkHDMO.jpg)
I am not sure if I missed the instructions to get it working once you have soldered it up, but I asked CMD who was able to help me. Here is what I did to get it working:
1) Download bootmapper from winkeyless.kr and the firmware
2) Flash firmware
3) Create hex file and flash it to the board
I built mine last night :) It was very straight forward to build. I used 55g vintage blacks and JTK pink on black. Amazing job yuktsi, you can really feel the quality in this board.Great looking!!! Thinking about jtk white-pink for my full pink 910.Show Image(http://i.imgur.com/mnYKlA6.jpg)Show Image(http://i.imgur.com/o6iZtlV.jpg)Show Image(http://i.imgur.com/nEkHDMO.jpg)
I am not sure if I missed the instructions to get it working once you have soldered it up, but I asked CMD who was able to help me. Here is what I did to get it working:
1) Download bootmapper from winkeyless.kr and the firmware
2) Flash firmware
3) Create hex file and flash it to the board
I built mine last night :) It was very straight forward to build. I used 55g vintage blacks and JTK pink on black. Amazing job yuktsi, you can really feel the quality in this board.Show Image(http://i.imgur.com/mnYKlA6.jpg)Show Image(http://i.imgur.com/o6iZtlV.jpg)Show Image(http://i.imgur.com/nEkHDMO.jpg)
I am not sure if I missed the instructions to get it working once you have soldered it up, but I asked CMD who was able to help me. Here is what I did to get it working:
1) Download bootmapper from winkeyless.kr and the firmware
2) Flash firmware
3) Create hex file and flash it to the board
you can really feel the quality in this board.
I built mine last night :) It was very straight forward to build. I used 55g vintage blacks and JTK pink on black. Amazing job yuktsi, you can really feel the quality in this board.Show Image(http://i.imgur.com/mnYKlA6.jpg)Show Image(http://i.imgur.com/o6iZtlV.jpg)Show Image(http://i.imgur.com/nEkHDMO.jpg)
I am not sure if I missed the instructions to get it working once you have soldered it up, but I asked CMD who was able to help me. Here is what I did to get it working:
1) Download bootmapper from winkeyless.kr and the firmware
2) Flash firmware
3) Create hex file and flash it to the board
I built mine last night :) It was very straight forward to build. I used 55g vintage blacks and JTK pink on black. Amazing job yuktsi, you can really feel the quality in this board.Show Image(http://i.imgur.com/mnYKlA6.jpg)Show Image(http://i.imgur.com/o6iZtlV.jpg)Show Image(http://i.imgur.com/nEkHDMO.jpg)
I am not sure if I missed the instructions to get it working once you have soldered it up, but I asked CMD who was able to help me. Here is what I did to get it working:
1) Download bootmapper from winkeyless.kr and the firmware
2) Flash firmware
3) Create hex file and flash it to the board
Pink/red is such a pretty color on case. Regarding the bottom, is that a brass weight put into a ss weight? :cool: :cool:
I built mine last night :) It was very straight forward to build. I used 55g vintage blacks and JTK pink on black. Amazing job yuktsi, you can really feel the quality in this board.Show Image(http://i.imgur.com/mnYKlA6.jpg)Show Image(http://i.imgur.com/o6iZtlV.jpg)Show Image(http://i.imgur.com/nEkHDMO.jpg)
I am not sure if I missed the instructions to get it working once you have soldered it up, but I asked CMD who was able to help me. Here is what I did to get it working:
1) Download bootmapper from winkeyless.kr and the firmware
2) Flash firmware
3) Create hex file and flash it to the board
I figured I should share some files and instructions related to the 910
Keymapping
1. Download Bootmapper from winkeyless.kr (http://blog.winkeyless.kr/155)
2. Download the default keymap file keymap_gb_20170818211212.hex (https://www.dropbox.com/s/zke3ar6fhgndk7k/keymap_gb_20170818211212.hex?dl=0)
3. Open Bootmapper Client > "Keymapper" tab > "Load .hex/.json" > tick "Reboot after uploading" > "Upload"
4. To edit keymap, tick "Toggle Bootmapper" > hit the key on the board that you want to remap > the corresponding col/row on the Key Mapper will be highlighted > change whatever key that you want to change > tick "Reboot after uploading" > "Upload"
Flash/Update firmware
1. All 910 PCB is pre-flashed with the latest firmware.
2. To flash/update firmware, download latest firmware from winkeyless.kr (http://blog.winkeyless.kr/153) > go to "Option" in Bootmapper Client > unplug your 910 > hold "Backspace" and plug in > hit "Firm Up (Select .hex file) > select the file download from winkeyless.kr, ie. ps2avrGB_NKRO.hex > "Open"
Plate file
1. In-case you want to have your own plate made of different material, e.g. polycarbonate, brass, titanium...
2. In-case you need an extra plate.
3. Download here (https://www.dropbox.com/s/b82rdackjmo6yl3/910_swtich_plate_v2.DWG?dl=0)
PCB Layout file
1. In-case you want to make a different housing for your 910.
2. In-case you want to make your own 65% custom.
3. Download here (https://www.dropbox.com/s/lkcrlqv3jdy94wi/tgr_unicorn.DWG?dl=0)
Finally done building this bad boi :thumb:Show Image(https://i.imgur.com/5pAaQn5.jpg)Show Image(https://i.imgur.com/rxQqLMI.jpg)Show Image(https://i.imgur.com/zeqZB9X.jpg)Show Image(https://i.imgur.com/h1zhvMz.jpg)Show Image(https://i.imgur.com/IWGFnBg.jpg)Show Image(https://i.imgur.com/MypeV5e.jpg)Show Image(https://i.imgur.com/r1Vss8u.jpg)
Thanks yuktsi :-*
Finally done building this bad boi :thumb:Show Image(https://i.imgur.com/5pAaQn5.jpg)Show Image(https://i.imgur.com/rxQqLMI.jpg)Show Image(https://i.imgur.com/zeqZB9X.jpg)Show Image(https://i.imgur.com/h1zhvMz.jpg)Show Image(https://i.imgur.com/IWGFnBg.jpg)Show Image(https://i.imgur.com/MypeV5e.jpg)Show Image(https://i.imgur.com/r1Vss8u.jpg)
Thanks yuktsi :-*
Ur giving byker a run for his money!!!!
He needs a GMK set to make it ultra pretty.
Finally done building this bad boi :thumb:Show Image(https://i.imgur.com/5pAaQn5.jpg)Show Image(https://i.imgur.com/rxQqLMI.jpg)Show Image(https://i.imgur.com/zeqZB9X.jpg)Show Image(https://i.imgur.com/h1zhvMz.jpg)Show Image(https://i.imgur.com/IWGFnBg.jpg)Show Image(https://i.imgur.com/MypeV5e.jpg)Show Image(https://i.imgur.com/r1Vss8u.jpg)
Thanks yuktsi :-*
Can i haz a slot in that re-run ? :)There is an interest Check thread up for it, get excited
Sky dolch would look great alsoFinally done building this bad boi :thumb:Show Image(https://i.imgur.com/5pAaQn5.jpg)Show Image(https://i.imgur.com/rxQqLMI.jpg)Show Image(https://i.imgur.com/zeqZB9X.jpg)Show Image(https://i.imgur.com/h1zhvMz.jpg)Show Image(https://i.imgur.com/IWGFnBg.jpg)Show Image(https://i.imgur.com/MypeV5e.jpg)Show Image(https://i.imgur.com/r1Vss8u.jpg)
Thanks yuktsi :-*
Ur giving byker a run for his money!!!!
He needs a GMK set to make it ultra pretty.
Very true, this boi deserve the best keyset :-*
Hint: blue alert :p
(Attachment Link)
(Attachment Link)
:D :D :D :D :D
(Attachment Link)
(Attachment Link)
:D :D :D :D :D
Got mine today.Thanks Sam :DShow Image(https://i.imgur.com/wc3Dckp.jpg)
Got mine today.Thanks Sam :DShow Image(https://i.imgur.com/wc3Dckp.jpg)
(Attachment Link)
(Attachment Link)
:D :D :D :D :D
Got mine today.Thanks Sam :DShow Image(https://i.imgur.com/wc3Dckp.jpg)
Beauties!! :thumb:
What is the different marking in the upper 910 blocker spot on the gray board? It's clearly a 910 as well, but did the SE have a different logo cut up there?
Right, that shade of gray and the green plate are specially made for the Vietname Keyboard Community.Got mine today.Thanks Sam :DShow Image(https://i.imgur.com/wc3Dckp.jpg)
Beauties!! :thumb:
What is the different marking in the upper 910 blocker spot on the gray board? It's clearly a 910 as well, but did the SE have a different logo cut up there?
Looks like it says VKC, so I assume it's the Vietnam Keyboard Club edition.
If you are interested in ordering additional parts for your 910
Brass plate & PCB - 80$
Brass blocker for 910 cutout - 20$
RGB kit - 15$
https://goo.gl/forms/l2q5LNGLz5G9Ip443
<3
If you are interested in ordering additional parts for your 910
Brass plate & PCB - 80$
Brass blocker for 910 cutout - 20$
RGB kit - 15$
https://goo.gl/forms/l2q5LNGLz5G9Ip443
<3
Does the Brass blocker also work for the TGR-910 CE? :)
Brass PCB?PCB + a brass plate
Thanks man, didn't realize that... :thumb:If you are interested in ordering additional parts for your 910
Brass plate & PCB - 80$
Brass blocker for 910 cutout - 20$
RGB kit - 15$
https://goo.gl/forms/l2q5LNGLz5G9Ip443
<3
Does the Brass blocker also work for the TGR-910 CE? :)
It already comes with one
The dolphin didn't have of brass weight right?Show Image(https://i.imgur.com/hXMoa7k.jpg)
No wonder this board feel really solid. Turn out the 910 was 65% with the weight of TKL. The TKL in above pict is Lynn Dolphin v2 which is rather heavy for a kustom TKL
Good job Yuktsi :thumb:
The dolphin didn't have of brass weight right?Show Image(https://i.imgur.com/hXMoa7k.jpg)
No wonder this board feel really solid. Turn out the 910 was 65% with the weight of TKL. The TKL in above pict is Lynn Dolphin v2 which is rather heavy for a kustom TKL
Good job Yuktsi :thumb:
If you are interested in ordering additional parts for your 910
Brass plate & PCB - 80$
Brass blocker for 910 cutout - 20$
RGB kit - 15$
https://goo.gl/forms/l2q5LNGLz5G9Ip443
<3
Is brass good for linears?
I still don't think the plate material makes that much difference in feel. Plate vs. no plate, yes probably. But material, not much. I know i'm in the minority here, but I believe (again, not the majority opinion here) the vibrations from the switches resonate through the PCB and and then wherever it attaches to the case. The biggest difference is the case material and sound dampening between the case and the place where it contacts the PCB.
This is my experience with 10 or 11 builds.
I still don't think the plate material makes that much difference in feel. Plate vs. no plate, yes probably. But material, not much. I know i'm in the minority here, but I believe (again, not the majority opinion here) the vibrations from the switches resonate through the PCB and and then wherever it attaches to the case. The biggest difference is the case material and sound dampening between the case and the place where it contacts the PCB.
This is my experience with 10 or 11 builds.
That's what happens when you mostly build tray mounted keyboards, because the PCB does not directly contact the case anywhere in a top mounted build like this where plate material plays a much bigger role.
Here the plate is attached to the case and leaves the PCB floating under it, different plate materials offer different amounts of flex in this case and the plate is doing most of the work of holding things in place. In a tray mounted build you always have the PCB directly on mounts on a solid block of whatever material you chose, providing a lot less flex around those mounting points and having the PCB do most of the work.
I like 910se very much, how can I buy it
(Attachment Link)
Full Album Here (https://www.flickr.com/photos/dudesnail/albums/72157686458060210/with/36539602854/)
(Attachment Link)Stunning, this is the grey color yea?
Full Album Here (https://www.flickr.com/photos/dudesnail/albums/72157686458060210/with/36539602854/)
(Attachment Link)Stunning, this is the grey color yea?
Full Album Here (https://www.flickr.com/photos/dudesnail/albums/72157686458060210/with/36539602854/)
I'm damn excited for my CE
Any tips for reducing the pinging sound on this board? I'm a heavy-handed typist and the pinging is quite noticeable. I've considered adding a thin foam pad under the PCB, but that would block all the lighting underneath.
Any tips for reducing the pinging sound on this board? I'm a heavy-handed typist and the pinging is quite noticeable. I've considered adding a thin foam pad under the PCB, but that would block all the lighting underneath.Try removing the diffuser and add the PE foam that comes with the board underneath.
If you are interested in ordering additional parts for your 910
Brass plate & PCB - 80$
Brass blocker for 910 cutout - 20$
RGB kit - 15$
https://goo.gl/forms/l2q5LNGLz5G9Ip443
<3
Sam, I just got my 910 and your boards are incredible. This goes to the top of my collection for sure. Thank you so much for all your hard work and dedication to the community. Your perseverance equates to a quality product that is unforgettable.Show Image(https://i.imgur.com/57lu492.jpg)
FULL IMGUR POST (https://imgur.com/a/Jr12J)
If you are interested in ordering additional parts for your 910
Brass plate & PCB - 80$
Brass blocker for 910 cutout - 20$
RGB kit - 15$
https://goo.gl/forms/l2q5LNGLz5G9Ip443
<3
Hey yuktsi, any update for people who filled in this form? Never received an invoice
Has anyone had any RGB issues with their boards? I have two PCBs and have only half the RGBs lighting up on one and only 3 on the other. Neither one is lighting up the "910" front RGB. Any ideas? I find it odd that both PCBs are having similar issues. I reflashed the firmware/keymap and then did a reconnect with the RGB Settings under Bootmapper and nothing helped. I also tried adjusting the number of LEDs on Bootmapper and nada. Any help would be appreciated!!
Can we get a status of the units that are still delayed?
It's been dead for almost a month now, looking for a silver lining...
Made a little alteration to my 910 weight last night
(https://farm5.staticflickr.com/4559/24749759588_c1b96a2214_k.jpg) (https://flic.kr/p/DH3ZfU)
Made a little alteration to my 910 weight last night
(https://farm5.staticflickr.com/4559/24749759588_c1b96a2214_k.jpg) (https://flic.kr/p/DH3ZfU)
Got my 910 painted. Not too sure what I was hoping for, but the end result just amaze me way too much for me to comprehend.Show Image(https://uploads.tapatalk-cdn.com/20171127/1b6bcc6997d48dea42918434be4fcfdd.jpg)
Sent from my SM-G935F using Tapatalk
Got my 910 painted. Not too sure what I was hoping for, but the end result just amaze me way too much for me to comprehend.Show Image(https://uploads.tapatalk-cdn.com/20171127/1b6bcc6997d48dea42918434be4fcfdd.jpg)
Sent from my SM-G935F using Tapatalk
How much and where did you get it repainted may i ask?
Got my 910 painted. Not too sure what I was hoping for, but the end result just amaze me way too much for me to comprehend.Show Image(https://uploads.tapatalk-cdn.com/20171127/1b6bcc6997d48dea42918434be4fcfdd.jpg)
Sent from my SM-G935F using Tapatalk
Got my 910 painted. Not too sure what I was hoping for, but the end result just amaze me way too much for me to comprehend.Show Image(https://uploads.tapatalk-cdn.com/20171127/1b6bcc6997d48dea42918434be4fcfdd.jpg)
Sent from my SM-G935F using Tapatalk
How much and where did you get it repainted may i ask?
he said in the CE thread that he spraypainted it
It's chameleon colour. So mainly green. But the colour you are seeing is because I'm taking the picture from an angle. Pretty dang Imo.Got my 910 painted. Not too sure what I was hoping for, but the end result just amaze me way too much for me to comprehend.Show Image(https://uploads.tapatalk-cdn.com/20171127/1b6bcc6997d48dea42918434be4fcfdd.jpg)
Sent from my SM-G935F using TapatalkGot my 910 painted. Not too sure what I was hoping for, but the end result just amaze me way too much for me to comprehend.Show Image(https://uploads.tapatalk-cdn.com/20171127/1b6bcc6997d48dea42918434be4fcfdd.jpg)
Sent from my SM-G935F using Tapatalk
How much and where did you get it repainted may i ask?
he said in the CE thread that he spraypainted it
Looks gorgeous. I wonder what color it is and what spray paint can he used.
Around 100usd since the paint is quite expensive although that guy alrd charge quite minimal for paint jobs.Got my 910 painted. Not too sure what I was hoping for, but the end result just amaze me way too much for me to comprehend.Show Image(https://uploads.tapatalk-cdn.com/20171127/1b6bcc6997d48dea42918434be4fcfdd.jpg)
Sent from my SM-G935F using Tapatalk
How much and where did you get it repainted may i ask?
Around 100usd since the paint is quite expensive although that guy alrd charge quite minimal for paint jobs.Got my 910 painted. Not too sure what I was hoping for, but the end result just amaze me way too much for me to comprehend.Show Image(https://uploads.tapatalk-cdn.com/20171127/1b6bcc6997d48dea42918434be4fcfdd.jpg)
Sent from my SM-G935F using Tapatalk
How much and where did you get it repainted may i ask?
Sent from my SM-G935F using Tapatalk
:) great news ! :)what version did you get? and will you build it on stream ? :)
Received mine today :))Pic?
Show Image(https://i.imgur.com/tPu2wxV.jpg)Show Image(https://i.imgur.com/rlZhcoz.jpg)Show Image(https://i.imgur.com/hi75tvZ.jpg)Show Image(https://i.imgur.com/p84y9RA.jpg)
What an odyssey :))
There goes my no-fap streak.Show Image(https://i.imgur.com/tPu2wxV.jpg)Show Image(https://i.imgur.com/rlZhcoz.jpg)Show Image(https://i.imgur.com/hi75tvZ.jpg)Show Image(https://i.imgur.com/p84y9RA.jpg)
What an odyssey :))
There goes my no-fap streak.
I'll join in posting kit pics.
This purple looks totally different in daylight and desklight.
I've actually built this now, pretty much, will take some proper pics at some point.
Yuktsi, any word on Poly 910 shipping?
Yuktsi, any word on Poly 910 shipping?
He msg'd me back today, sounds like shipping invoices very shortly and some pics. Sounds like they came out great.
Talking about 910CE poly, I think the original 910 poly was a limited experiment.
Yuktsi, any word on Poly 910 shipping?
He msg'd me back today, sounds like shipping invoices very shortly and some pics. Sounds like they came out great.
Talking about 910CE poly, I think the original 910 poly was a limited experiment.
someone told me there is no 910ce poly, only 910 poly :o ?
Yuktsi, any word on Poly 910 shipping?
He msg'd me back today, sounds like shipping invoices very shortly and some pics. Sounds like they came out great.
Talking about 910CE poly, I think the original 910 poly was a limited experiment.
someone told me there is no 910ce poly, only 910 poly :o ?
My invoice says TGR 910 Polycarbonate. CE, SE, ME whatever edition, etc. doesn’t really matter to me, just excited to get this board
Yuktsi, any word on Poly 910 shipping?
He msg'd me back today, sounds like shipping invoices very shortly and some pics. Sounds like they came out great.
Talking about 910CE poly, I think the original 910 poly was a limited experiment.
someone told me there is no 910ce poly, only 910 poly :o ?
My invoice says TGR 910 Polycarbonate. CE, SE, ME whatever edition, etc. doesn’t really matter to me, just excited to get this board
Hmm you might be right! I love the sides of this round of 910, so I'd totally be okay with that :D
Yeah, so I totally only just discovered this thread/keyboard. To little to late I know, but I'm gonna be that guy and ask... "will there be another run?"
Product looks amazing! I literally joined geekhack to investigate the possibility of getting my hands on one. Any hope or should I start looking for another 65% board?
Yeah, so I totally only just discovered this thread/keyboard. To little to late I know, but I'm gonna be that guy and ask... "will there be another run?"
Product looks amazing! I literally joined geekhack to investigate the possibility of getting my hands on one. Any hope or should I start looking for another 65% board?
He's Currently doing TGR Alice and i think afterwards, he's doing another run of TGR Jane. So maybe next year? But don't quote me :D
Yeah, so I totally only just discovered this thread/keyboard. To little to late I know, but I'm gonna be that guy and ask... "will there be another run?"
Product looks amazing! I literally joined geekhack to investigate the possibility of getting my hands on one. Any hope or should I start looking for another 65% board?
He's Currently doing TGR Alice and i think afterwards, he's doing another run of TGR Jane. So maybe next year? But don't quote me :D
910 is dead, he's said
maybe 65TE on typemachina
Yeah, so I totally only just discovered this thread/keyboard. To little to late I know, but I'm gonna be that guy and ask... "will there be another run?"
Product looks amazing! I literally joined geekhack to investigate the possibility of getting my hands on one. Any hope or should I start looking for another 65% board?
He's Currently doing TGR Alice and i think afterwards, he's doing another run of TGR Jane. So maybe next year? But don't quote me :D
910 is dead, he's said
maybe 65TE on typemachina
Not what he said to me... so I will continue to hope. If not at least I got the poly one.
Anywhere to get compatible pcbs and plates?
Anywhere to get compatible pcbs and plates?
Go find onefiftynine and buy him a beer.