Post by: Vulcan on Wed, 30 January 2019, 10:13:01
(https://i.ibb.co/nn3YVyv/mataram-2-859.jpg) (https://ibb.co/HxNbMys)
The Maja
MAJA is an ergo layout keyboard design by Vulcan and KBDfans. Maja is named after Majapahit, a great empire that once rules southeast Asia. The glorious emblem of Majapahit called the Surya of Majapahit is beautifully engraved on the brass weight.
(https://i.ibb.co/zs8Zzny/2115355837.jpg) (https://ibb.co/R2hcqvx)(https://i.ibb.co/kGFQ6V2/284702072.jpg) (https://ibb.co/NFzZng2)(https://i.ibb.co/g6Vcp87/1369420888.jpg) (https://ibb.co/8XcQpwB)(https://i.ibb.co/0qsHQ7Q/1520291616.jpg) (https://ibb.co/p2hYn7n)
How it's Made
The Maja is made with a highly precision CNC machine from a block of high-quality aluminum and a block of brass for the weight, it is then sandblasted and anodized to give a textured smooth finish to the surface with the desired color offered.
The Maja also comes with a polycarbonate version of the case. Polycarbonate is known for a very strong and durable material.
(https://i.ibb.co/7nxB6Bk/1912596473.jpg) (https://ibb.co/7nxB6Bk) (https://i.ibb.co/FH8qTnC/1357471862.jpg) (https://ibb.co/FH8qTnC) (https://i.ibb.co/8XcQpwB/1369420888.jpg) (https://ibb.co/8XcQpwB) (https://i.ibb.co/XzJTgNX/771314077.jpg) (https://ibb.co/XzJTgNX) (https://i.ibb.co/YZJyNkD/642436326.jpg) (https://ibb.co/h7qpsp9) (https://i.ibb.co/3NysQPF/677173995.jpg) (https://ibb.co/3NysQPF) (https://i.ibb.co/R2hcqvx/2115355837.jpg) (https://ibb.co/R2hcqvx) (https://i.ibb.co/x2MgCXy/452316305.jpg) (https://ibb.co/x2MgCXy) (https://i.ibb.co/NFzZng2/284702072.jpg) (https://ibb.co/NFzZng2) (https://i.ibb.co/DCf3d1Z/1981580763.jpg) (https://ibb.co/DCf3d1Z) (https://i.ibb.co/m4TRP9q/1874078972.jpg) (https://ibb.co/m4TRP9q) (https://i.ibb.co/p2hYn7n/1520291616.jpg) (https://ibb.co/p2hYn7n) (https://ibb.co/D72ttn1)
The Features
Maja features an ergonomic layout with an 8-degree keyboard angle to give a more comfortable typing experience. The top-mounted case system combined with a brass material as the plate will give you a rigged, firm, and consistent acoustic sound when typing.
(https://i.ibb.co/4mQBWBt/322901179.jpg) (https://ibb.co/h7qpsp9)(https://i.ibb.co/qRQddwD/1203795767.jpg) (https://ibb.co/D72ttn1)
The PCB
To provide the best end-user experience available The Maja offers a soldered version of PCB with layout option and a hot-swap PCB with a full per-key RGB light with no switch soldering require to assemble the keyboard.
(https://i.ibb.co/hcQXb1K/984513522.jpg) (https://ibb.co/C6CJgsn)
The Layout (For Soldered version PCB)
(https://i.ibb.co/C14M39C/1539730967.jpg) (https://ibb.co/vwfQ6dy)
Specification
Case:
1. Aluminum Top Case (Sandblast, Anodized) / polycarbonate as Option
2. Aluminum Bottom Case (Sandblast, Anodized) / polycarbonate as Option
3. Brass Plate (Sandblasted)
4. Brass Weight (Sandblasted)
5. Foam between PCB & Plate
6. Foam between Bottom case & PCB
PCB :
1. Soldered/RGB Hotswap PCB
2. QMK
3. USB type C supporting C to C
4. Ergonomic Layout
Color :
To be Announce
Video
Follow Me to see my other keyboard project
Instagram (https://www.instagram.com/project_vulcan/)
The Maja
MAJA is an ergo layout keyboard design by Vulcan and KBDfans. Maja is named after Majapahit, a great empire that once rules southeast Asia. The glorious emblem of Majapahit called the Surya of Majapahit is beautifully engraved on the brass weight.
(https://i.ibb.co/zs8Zzny/2115355837.jpg) (https://ibb.co/R2hcqvx)(https://i.ibb.co/kGFQ6V2/284702072.jpg) (https://ibb.co/NFzZng2)(https://i.ibb.co/g6Vcp87/1369420888.jpg) (https://ibb.co/8XcQpwB)(https://i.ibb.co/0qsHQ7Q/1520291616.jpg) (https://ibb.co/p2hYn7n)
How it's Made
The Maja is made with a highly precision CNC machine from a block of high-quality aluminum and a block of brass for the weight, it is then sandblasted and anodized to give a textured smooth finish to the surface with the desired color offered.
The Maja also comes with a polycarbonate version of the case. Polycarbonate is known for a very strong and durable material.
(https://i.ibb.co/7nxB6Bk/1912596473.jpg) (https://ibb.co/7nxB6Bk) (https://i.ibb.co/FH8qTnC/1357471862.jpg) (https://ibb.co/FH8qTnC) (https://i.ibb.co/8XcQpwB/1369420888.jpg) (https://ibb.co/8XcQpwB) (https://i.ibb.co/XzJTgNX/771314077.jpg) (https://ibb.co/XzJTgNX) (https://i.ibb.co/YZJyNkD/642436326.jpg) (https://ibb.co/h7qpsp9) (https://i.ibb.co/3NysQPF/677173995.jpg) (https://ibb.co/3NysQPF) (https://i.ibb.co/R2hcqvx/2115355837.jpg) (https://ibb.co/R2hcqvx) (https://i.ibb.co/x2MgCXy/452316305.jpg) (https://ibb.co/x2MgCXy) (https://i.ibb.co/NFzZng2/284702072.jpg) (https://ibb.co/NFzZng2) (https://i.ibb.co/DCf3d1Z/1981580763.jpg) (https://ibb.co/DCf3d1Z) (https://i.ibb.co/m4TRP9q/1874078972.jpg) (https://ibb.co/m4TRP9q) (https://i.ibb.co/p2hYn7n/1520291616.jpg) (https://ibb.co/p2hYn7n) (https://ibb.co/D72ttn1)
The Features
Maja features an ergonomic layout with an 8-degree keyboard angle to give a more comfortable typing experience. The top-mounted case system combined with a brass material as the plate will give you a rigged, firm, and consistent acoustic sound when typing.
(https://i.ibb.co/4mQBWBt/322901179.jpg) (https://ibb.co/h7qpsp9)(https://i.ibb.co/qRQddwD/1203795767.jpg) (https://ibb.co/D72ttn1)
The PCB
To provide the best end-user experience available The Maja offers a soldered version of PCB with layout option and a hot-swap PCB with a full per-key RGB light with no switch soldering require to assemble the keyboard.
(https://i.ibb.co/hcQXb1K/984513522.jpg) (https://ibb.co/C6CJgsn)
The Layout (For Soldered version PCB)
(https://i.ibb.co/C14M39C/1539730967.jpg) (https://ibb.co/vwfQ6dy)
Specification
Case:
1. Aluminum Top Case (Sandblast, Anodized) / polycarbonate as Option
2. Aluminum Bottom Case (Sandblast, Anodized) / polycarbonate as Option
3. Brass Plate (Sandblasted)
4. Brass Weight (Sandblasted)
5. Foam between PCB & Plate
6. Foam between Bottom case & PCB
PCB :
1. Soldered/RGB Hotswap PCB
2. QMK
3. USB type C supporting C to C
4. Ergonomic Layout
Color :
To be Announce
Video
Follow Me to see my other keyboard project
Instagram (https://www.instagram.com/project_vulcan/)
Post by: Vulcan on Wed, 30 January 2019, 10:13:24
Post by: cijanzen on Wed, 30 January 2019, 10:15:59
My only suggestion was to have the edges curve down towards the front instead of the hard angle you currently have. The rest of the board is curvy so I think that would suit the design more.
Post by: SlamMakanen on Wed, 30 January 2019, 10:28:32
Sent from my iPhone using Tapatalk
Post by: mbsurfer on Wed, 30 January 2019, 10:31:10
Post by: t0ch on Wed, 30 January 2019, 10:43:33
Split Backspace support
Moving the right 3-key cluster a bit more right to accommodate a forth key below that fits in the space next to the up arrow key
Beautiful board, I will be stalking its progress ;D
Post by: Araex on Wed, 30 January 2019, 10:49:33
Post by: MikeTheTiger on Wed, 30 January 2019, 11:49:43
Post by: _ODIN_ on Wed, 30 January 2019, 11:53:49
Gesendet von meinem H8416 mit Tapatalk
Post by: fireworm on Wed, 30 January 2019, 13:08:06
Split backspace?
Post by: blizzara01 on Wed, 30 January 2019, 13:38:41
Post by: MajorKoos on Wed, 30 January 2019, 13:57:28
Post by: sdg2416 on Wed, 30 January 2019, 14:53:58
Post by: Paddel06 on Wed, 30 January 2019, 15:09:30
Post by: PikaJoyce on Wed, 30 January 2019, 16:32:05
Post by: Sylanthra on Wed, 30 January 2019, 17:17:15
Post by: BundleOfJoysticks on Wed, 30 January 2019, 18:47:51
Make the case tilt the other way and I'd be interested.
Post by: yuppie on Wed, 30 January 2019, 19:07:08
Post by: Nigolski on Wed, 30 January 2019, 19:08:42
Post by: airyimbin on Wed, 30 January 2019, 19:51:16
Is this going to have a max order like the Fusion?
Post by: Vulcan on Wed, 30 January 2019, 19:59:40
Would love to get this.
Is this going to have a max order like the Fusion?
there is no max order for this one.. Fusion60 only have max order for the first round, the second round of fusion60 will not.
Post by: airyimbin on Wed, 30 January 2019, 20:07:07
Would love to get this.
Is this going to have a max order like the Fusion?
there is no max order for this one.. Fusion60 only have max order for the first round, the second round of fusion60 will not.
That's awesome! I am so in for this keyboard.
Post by: ullr on Wed, 30 January 2019, 20:52:38
Post by: OracleKev on Wed, 30 January 2019, 23:37:55
Post by: teamrushpntball on Thu, 31 January 2019, 06:58:26
macro column (s) on the left would be perfect.
Even just a single column on the left would be great.
Post by: _ODIN_ on Thu, 31 January 2019, 11:56:18
Post by: JSaintS on Fri, 01 February 2019, 06:13:22
I, however, agree with ODIN's comment, I would like one more key on the right bottom row.
I'll probably get one anyway, missed the Alice and that is going for way too much right now. Do you have a price estimate on this? even something really vague would do :)
Post by: Vulcan on Fri, 01 February 2019, 07:31:12
(https://i.ibb.co/y4z9Nps/werg.jpg) (https://ibb.co/KKtP5Dy)
(https://i.ibb.co/nLR2HF3/dfsdf.jpg) (https://ibb.co/0GQNgxB)
I would like to see an added key on the right bottom row to balance out the WKL blocker
You mean like this?
(https://i.ibb.co/VYht4T8/jutr.jpg) (https://ibb.co/Mkjs07L)
Post by: krey on Fri, 01 February 2019, 07:34:31
usb-c too pls!
Post by: _ODIN_ on Fri, 01 February 2019, 07:44:39
Show Image
Thank you very much for your inputs and suggestion, from what i got so far i made some adjustment to the design.. what do you think?
(https://i.ibb.co/y4z9Nps/werg.jpg) (https://ibb.co/KKtP5Dy)
(https://i.ibb.co/nLR2HF3/dfsdf.jpg) (https://ibb.co/0GQNgxB)
I would like to see an added key on the right bottom row to balance out the WKL blocker
You mean like this?
(https://i.ibb.co/VYht4T8/jutr.jpg) (https://ibb.co/Mkjs07L)
yes :thumb:
Post by: OracleKev on Fri, 01 February 2019, 07:54:25
yes :thumb:Show ImageThank you very much for your inputs and suggestion, from what i got so far i made some adjustment to the design.. what do you think?
(https://i.ibb.co/y4z9Nps/werg.jpg) (https://ibb.co/KKtP5Dy)
(https://i.ibb.co/nLR2HF3/dfsdf.jpg) (https://ibb.co/0GQNgxB)I would like to see an added key on the right bottom row to balance out the WKL blocker
You mean like this?
(https://i.ibb.co/VYht4T8/jutr.jpg) (https://ibb.co/Mkjs07L)
uh, would it be better if the added key size is 1.5u?
Post by: _ODIN_ on Fri, 01 February 2019, 07:57:26
uh, would it be better if the added key size is 1.5u?
[/quote]
I think that the blocker would be very small
Gesendet von meinem H8416 mit Tapatalk
Post by: OracleKev on Fri, 01 February 2019, 08:02:54
uh, would it be better if the added key size is 1.5u?
I think that the blocker would be very small
Gesendet von meinem H8416 mit Tapatalk
[/quote]
I'd argue that 1u key is pretty hard to use. I'd prefer 1.5u even if the blocker is small. My 2 cents.
Post by: _ODIN_ on Fri, 01 February 2019, 12:00:10
Post by: oh_chesteroni on Fri, 01 February 2019, 21:08:28
Post by: p_blaze on Fri, 01 February 2019, 22:36:13
Another idea would be a split&tent with the ergo style intact, which would be pretty cool and solve the issue ergonomics.
Post by: OracleKev on Fri, 01 February 2019, 22:45:42
That's no go for me... :-[
[EDIT] maybe the layout is wrong? it doesn't seem to agree with the plate in the rendering.
Post by: Vulcan on Sat, 02 February 2019, 16:56:51
Any chance for a negative angle instead of a positive one? The reason I usually avoid ergos like this is because they are not really ergonomic - you still are forced to kink your hands upwards and pinch the nerves and tendons in your wrist. A negative angle would make this a much more attractive board, and not a budget Alice.
Another idea would be a split&tent with the ergo style intact, which would be pretty cool and solve the issue ergonomics.
Negative angle? I dont understand, can you give me picture or drawing?
Yea a split would be nice hmm.. I ll try.. thank you very much for your advice
Sent from my SM-G610F using Tapatalk
Post by: Vulcan on Sat, 02 February 2019, 17:01:05
BTW, just realized the bottom right row (N, M, , .) is shifted by one key.But isnt that the default layout for HHKB and other 60% keyboard? If the FN are in the left side of the shift wouldnt that be weird?
That's no go for me... :-[
[EDIT] maybe the layout is wrong? it doesn't seem to agree with the plate in the rendering.
Sent from my SM-G610F using Tapatalk
Post by: Poesjuh on Sat, 02 February 2019, 17:05:59
FN - N - M - , - . - shift
Can totally undertand where OracleKev is coming from.
Post by: p_blaze on Sat, 02 February 2019, 19:33:32
Any chance for a negative angle instead of a positive one? The reason I usually avoid ergos like this is because they are not really ergonomic - you still are forced to kink your hands upwards and pinch the nerves and tendons in your wrist. A negative angle would make this a much more attractive board, and not a budget Alice.
Another idea would be a split&tent with the ergo style intact, which would be pretty cool and solve the issue ergonomics.
Negative angle? I dont understand, can you give me picture or drawing?
Yea a split would be nice hmm.. I ll try.. thank you very much for your advice
Sent from my SM-G610F using Tapatalk
http://ergo.human.cornell.edu/ahtutorials/typingposture.html
ideally, you want your hands facing inwards and at a negative angle like this:
http://i.imgur.com/oXvfizT.jpg
Of course, I would seek to improve upon that by adding space in the middle so your arms would be at resting position as well, hence the idea for a split ergo board. The split allows rotational tilt via tenting (VEA for example) for further improved ergonomics.
Post by: OracleKev on Sat, 02 February 2019, 21:03:00
No, the layout is wrong. It should be;
FN - N - M - , - . - shift
Can totally undertand where OracleKev is coming from.
Yeap.
FN N M , . / RShift
If it's not easy to understand, look at EM7 or Alice.
Strangely, the plate in the rendering looks right.
Post by: ullr on Sun, 03 February 2019, 01:04:14
(https://i.imgur.com/Fw9XnSF.png)
Post by: airyimbin on Sun, 03 February 2019, 14:14:36
If you look at a normal keyboard and at the TGR Alice, the N M , . / are shifted over to the right.
Vulcan your keymap shows them shifted to the left one column.
If you swapped the Shift and FN key then it we could have the row look like FN - N - M - , - . - Shift.
This should be the correct layout for a normal keyboard and for layouts similar to the TGR Alice.
The TGR Alice has an extra key on that row but the arrow keys in the Majapahit take up the space for that FN to the right of the shift.
Post by: Zambumon on Sun, 03 February 2019, 14:20:24
Consider USB-C.
Post by: ninjacore on Mon, 04 February 2019, 11:05:37
I don't find the added R Ctrl all that useful, but :shrug:
+1 split backspace
Post by: spyruf on Mon, 04 February 2019, 12:58:10
I also agree on having the 'b' key exist on both sides and the "nm" row needs to be shifted to the right such that the 'n' falls below/between 'h' and 'j'.
I also don't think the right shift needs to be split.
Post by: WilySouser on Mon, 04 February 2019, 13:24:20
Post by: _ODIN_ on Mon, 04 February 2019, 13:42:52
Gesendet von meinem H8416 mit Tapatalk
Post by: Lisinge on Fri, 08 February 2019, 16:38:42
Post by: YoungsterHarris on Sat, 09 February 2019, 08:32:55
Post by: _ODIN_ on Wed, 13 February 2019, 09:45:58
Post by: RDaneelOlivaw on Sun, 24 February 2019, 22:11:53
Post by: vicissitude on Sun, 24 February 2019, 22:53:10
Wish there will be some light indicator/stream,it should be perfect.
Post by: Aox on Mon, 25 February 2019, 00:48:40
Post by: airyimbin on Tue, 05 March 2019, 10:16:07
Very interested in this keyboard.
Post by: Kavik on Tue, 05 March 2019, 15:19:16
Post by: PikaJoyce on Tue, 05 March 2019, 15:21:45
Post by: GarrettSucks on Sun, 10 March 2019, 11:40:10
Post by: oldcat on Sun, 10 March 2019, 12:07:09
Post by: Pluto19 on Sun, 10 March 2019, 15:13:05
Post by: ubmit on Mon, 18 March 2019, 23:36:37
Post by: Findecanor on Tue, 19 March 2019, 07:55:59
Any chance of a PC version?Do you mean: with Windows keys?
Post by: Xynerorias on Tue, 19 March 2019, 09:06:23
Any chance of a PC version?Do you mean: with Windows keys?
PC = Polycarbonate
Post by: ubmit on Tue, 19 March 2019, 13:07:27
Any chance of a PC version?Do you mean: with Windows keys?
PC = Polycarbonate
Yes, exactly! I was referring to Polycarbonate
Post by: senryo on Tue, 19 March 2019, 13:24:53
Post by: Damage on Tue, 19 March 2019, 20:00:35
Post by: Phoenix1611 on Mon, 25 March 2019, 16:42:42
Sent from my SM-N950F using Tapatalk
Post by: djmantis on Mon, 25 March 2019, 18:17:24
Will you add a second 'B' on the right side? A lot of people (me included) use right index for B instead of left. Would be in if you can add that.
Sent from my SM-N950F using Tapatalk
I agree with this. Even if I don't use the exta 'B', I think it would be awesome to assign as an extra 'function' key.
Post by: MeloDet on Mon, 25 March 2019, 18:20:57
Post by: Pluto19 on Mon, 25 March 2019, 19:01:50
Will you add a second 'B' on the right side? A lot of people (me included) use right index for B instead of left. Would be in if you can add that.
I agree with this. Even if I don't use the exta 'B', I think it would be awesome to assign as an extra 'function' key.
You guys should check out the renders again.
Post by: FullSend on Mon, 25 March 2019, 20:02:54
Post by: loud_asian on Tue, 26 March 2019, 00:49:30
Filled out the from! This might be more for the finishing touches for the design but if you decide to put logo or symbol on the right blocker would you consider doing something like a white or black in lay? I noticed this on the Alice render for the minimal GB. Maybe people think it's dumb but I thought it was a really classy final touch.
You could do it yourself with enamel paint
Post by: Create_alt_delete on Tue, 26 March 2019, 09:21:24
I would like to see an added key on the right bottom row to balance out the WKL blocker
You mean like this?
(https://i.ibb.co/VYht4T8/jutr.jpg) (https://ibb.co/Mkjs07L)
I think the lone one 1u key looks very bizarre. I much prefer your original design, Vulcan.
Sent from my SM-G955U using Tapatalk
Post by: Marutks on Tue, 26 March 2019, 18:48:16
Post by: Marutks on Tue, 26 March 2019, 18:54:40
I think the lone one 1u key looks very bizarre. I much prefer your original design, Vulcan.
+1 original design is better :thumb:
I hope this will be aluminium keeb
Post by: PikaJoyce on Tue, 26 March 2019, 20:30:44
+1 on originalI think the lone one 1u key looks very bizarre. I much prefer your original design, Vulcan.
+1 original design is better :thumb:
I hope this will be aluminium keeb
Post by: _ODIN_ on Mon, 08 April 2019, 11:28:36
Post by: haingo1094 on Mon, 08 April 2019, 11:41:52
@Vulcan Do you have a rough time estimate? I am currently planning my spendings on keyboards.I think he will let us know after completing fushion60 gruopbuy
Post by: fractl on Mon, 08 April 2019, 11:46:07
Post by: Vulcan on Tue, 09 April 2019, 00:30:29
@Vulcan Do you have a rough time estimate? I am currently planning my spendings on keyboards.Hai odin, sorry i have been away for sometimes.. I have too many work to do in real life.. so this project is still in pending..
Second reason is i want to make sure fusion60 goes well before starting a new project
Sent from my SM-G610F using Tapatalk
Post by: _ODIN_ on Tue, 09 April 2019, 01:21:09
Thank you for the update. : )@Vulcan Do you have a rough time estimate? I am currently planning my spendings on keyboards.Hai odin, sorry i have been away for sometimes.. I have too many work to do in real life.. so this project is still in pending..
Second reason is i want to make sure fusion60 goes well before starting a new project
Sent from my SM-G610F using Tapatalk
Gesendet von meinem H8416 mit Tapatalk
Post by: haingo1094 on Tue, 09 April 2019, 17:52:45
Post by: Broseph on Wed, 10 April 2019, 07:38:05
Anyone interested in polycarbonate kits for this keyboard? I am definitely in for polycarbonateThat's what I'm hoping for too.
Sent from my SM-N960U1 using Tapatalk
Post by: haingo1094 on Wed, 10 April 2019, 23:20:04
seen to be not only me want PC version :DAnyone interested in polycarbonate kits for this keyboard? I am definitely in for polycarbonateThat's what I'm hoping for too.
Sent from my SM-N960U1 using Tapatalk
Post by: thornkin on Thu, 11 April 2019, 01:26:31
Sent from my Mediatek MTK8173 Chromebook using Tapatalk
Post by: Kavik on Thu, 11 April 2019, 10:29:52
I really like this one. To echo the above, please fix the N key (and that row). I think it wil be really hard to type with the N being where B usually is. It needs to be to the right of the h, not the left.
Sent from my Mediatek MTK8173 Chromebook using Tapatalk
I hadn't even noticed that. That would make typing rather odd. It seems to be caused by the fact that the up arrow is on the same row, which pushes the right shift and Fn keys left a bit. Compare to the Dolphin EM7, which has the arrow cluster shifted down one row so that it doesn't interfere.
Post by: coffeeshopcoder on Thu, 11 April 2019, 12:41:22
Post by: _ODIN_ on Fri, 12 April 2019, 06:36:51
Agree. Haven't noticed it as well.I really like this one. To echo the above, please fix the N key (and that row). I think it wil be really hard to type with the N being where B usually is. It needs to be to the right of the h, not the left.
Sent from my Mediatek MTK8173 Chromebook using Tapatalk
I hadn't even noticed that. That would make typing rather odd. It seems to be caused by the fact that the up arrow is on the same row, which pushes the right shift and Fn keys left a bit. Compare to the Dolphin EM7, which has the arrow cluster shifted down one row so that it doesn't interfere.
Post by: vicissitude on Fri, 12 April 2019, 08:31:50
it's more convenient with the directions.
Post by: Poesjuh on Fri, 12 April 2019, 13:46:46
(https://imgur.com/lyhGHxz)
Post by: coffeeshopcoder on Mon, 15 April 2019, 01:17:11
I'd say it have to be like this (yes bad edit I know, you get the point :P)Show Image(https://imgur.com/lyhGHxz)
thats an interesting idea. I dont know if alice owners map the second b to be fn, but looks nice enough to do an Fn+WSAD arrow cluster !
Post by: Poesjuh on Mon, 15 April 2019, 03:21:16
Sent from my iPhone using Tapatalk
Post by: wellbeing44 on Wed, 17 April 2019, 23:39:23
Post by: sadmachine on Thu, 18 April 2019, 01:45:06
Would you consider bringing back the fullsize majapahit? I think it had more appeal as a unique ergo compared to the alice-like ergos everywhere.
Also a fan of full-size. Would be more interested in this.
Post by: DoesItReallyMatter on Thu, 18 April 2019, 18:23:36
Would you consider bringing back the fullsize majapahit? I think it had more appeal as a unique ergo compared to the alice-like ergos everywhere.+1
Post by: lolafineday on Fri, 19 April 2019, 00:38:39
(https://i.imgur.com/E810Wvi.jpg) (https://geekhack.org/index.php?topic=99634.0)
Post by: Puddsy on Fri, 19 April 2019, 00:44:04
Would you consider bringing back the fullsize majapahit? I think it had more appeal as a unique ergo compared to the alice-like ergos everywhere.
something tells me it would cost a ****ing fortune
Post by: pcire on Fri, 19 April 2019, 00:45:57
I can see why people would like the full size behemoth, but I prefer this 65% kinda style! Love it!
(https://i.imgur.com/E810Wvi.jpg) (https://geekhack.org/index.php?topic=99634.0)
+1
Post by: japancakes on Sun, 21 April 2019, 01:21:43
+2Would you consider bringing back the fullsize majapahit? I think it had more appeal as a unique ergo compared to the alice-like ergos everywhere.+1
The split full-size is impossible to find and the red looked sick as hell.
Post by: FullSend on Wed, 24 April 2019, 20:05:27
Post by: hikashi1988 on Thu, 25 April 2019, 05:41:17
Post by: ppnp253 on Fri, 26 April 2019, 10:05:51
seen to be not only me want PC version :DAnyone interested in polycarbonate kits for this keyboard? I am definitely in for polycarbonateThat's what I'm hoping for too.
Sent from my SM-N960U1 using Tapatalk
+1 for PC version
Post by: lolafineday on Sat, 27 April 2019, 03:17:27
Any material! I love this board, hope there is more updates with the designer!seen to be not only me want PC version :DAnyone interested in polycarbonate kits for this keyboard? I am definitely in for polycarbonateThat's what I'm hoping for too.
Sent from my SM-N960U1 using Tapatalk
+1 for PC version
(https://i.imgur.com/E810Wvi.jpg) (https://geekhack.org/index.php?topic=99634.0)
Post by: Champalan on Sun, 28 April 2019, 22:52:33
Post by: KingOfMemes on Mon, 29 April 2019, 08:43:52
Post by: WHeisenberg on Mon, 29 April 2019, 13:07:45
Really digging these ergo designs being explored. Filled out the form, and very interested :thumb:
Indeed! Filled out the form. Really keen!
Post by: Blanki3 on Mon, 29 April 2019, 23:15:16
Post by: kucas on Tue, 30 April 2019, 23:09:41
Post by: whytwokay on Wed, 01 May 2019, 07:38:02
Post by: MeloDet on Sun, 12 May 2019, 12:26:20
Post by: lolafineday on Sun, 12 May 2019, 12:40:59
Sent from my iPhone using Tapatalk
Post by: MeloDet on Sun, 12 May 2019, 12:59:57
I hope this is not dead, this is my favorite, but if this isn’t progressing I will just go for the Rukia probably
Sent from my iPhone using Tapatalk
That is exactly why I'm asking lol I'd rather go with this, but if this is dead I'll go with the Rukia.
Post by: whytwokay on Sun, 12 May 2019, 13:34:37
Post by: Tyki on Sun, 12 May 2019, 13:44:29
Post by: lolafineday on Sun, 12 May 2019, 13:47:58
Really interested in this. So many options for the ego 65% space to choose from!Are there many ergos like this one? I only know of this one and rukia
Sent from my iPhone using Tapatalk
Post by: teamrushpntball on Sun, 12 May 2019, 15:54:49
Really interested in this. So many options for the ego 65% space to choose from!Are there many ergos like this one? I only know of this one and rukia
Sent from my iPhone using Tapatalk
Just the Lyn Em7 and Alice that both wrapped up buys late last year.
Post by: Tree_ on Sun, 12 May 2019, 21:18:49
Just the Lyn Em7 and Alice that both wrapped up buys late last year.Really interested in this. So many options for the ego 65% space to choose from!Are there many ergos like this one? I only know of this one and rukia
Sent from my iPhone using Tapatalk
And LZ Ergo.
Post by: Vulcan on Sun, 12 May 2019, 22:27:39
Post by: darrenph1 on Mon, 13 May 2019, 00:01:59
Hai guys, this is not dead. Sorry for being silent. Im still working on this, i got the internals 70% done. When im ready i will post some more renders.
Yes! Can’t wait for this. Thanks!
Sent from my iPhone using Tapatalk
Post by: Brioric on Sun, 19 May 2019, 15:36:27
Post by: coffeeshopcoder on Sun, 19 May 2019, 15:57:41
Post by: GeneriksGiraffe on Fri, 31 May 2019, 23:05:41
Post by: embracenext on Mon, 03 June 2019, 16:24:09
Post by: strigif0rm3s on Sun, 09 June 2019, 10:35:04
I absolutely need this keyboard. I missed out on the Alice. So sick of the MS Ergo 4000 :(
Same, this looks better than the alice imo. REALLY excited. hopefully supports windows key....
Im in 100%
Post by: Vizir on Mon, 10 June 2019, 17:02:18
Sent from my Pixel 2 using Tapatalk
Post by: Excelrius on Wed, 12 June 2019, 08:46:30
Post by: embracenext on Tue, 18 June 2019, 07:39:49
Post by: SlamMakanen on Thu, 27 June 2019, 01:04:31
Sent from my iPhone using Tapatalk
Post by: Dissitesuxba11s on Thu, 27 June 2019, 08:28:22
Post by: fractl on Thu, 27 June 2019, 09:51:45
Personally, I think something like this looks better, more balanced but with the extra key more integrated into the layout.
(https://i.imgur.com/KSNUCgX.jpg)
Post by: airyimbin on Thu, 27 June 2019, 10:05:32
That's not how it looks on a regular keyboard. For example N should be between H and J.
It's going to force people to type differently or use the shift as /
Sent from my SM-N960U using Tapatalk
Post by: flippanteer on Thu, 27 June 2019, 10:23:25
The NM,/ row should be shifted to the right one column.
That's not how it looks on a regular keyboard. For example N should be between H and J.
It's going to force people to type differently or use the shift as /
Sent from my SM-N960U using Tapatalk
Yeah, the KLE is off. Oddly though, the original render in the first post is correct, as it doesn't have a spot for the right Fn key so the shift is where it normally belongs
Post by: airyimbin on Thu, 27 June 2019, 10:24:26
Sent from my SM-N960U using Tapatalk
Post by: fractl on Thu, 27 June 2019, 10:35:54
Post by: ilpsxnus on Tue, 02 July 2019, 12:46:32
Hope this comes to fruition soon so I can stop pining for an Alice!
Post by: Vizir on Tue, 02 July 2019, 12:49:30
Sent from my Pixel 2 using Tapatalk
Post by: Poesjuh on Tue, 02 July 2019, 18:25:23
Very eager for this. Reminds me of the original Microsoft Natural Keyboard I loved so much.I actually still have that one :D
Hope this comes to fruition soon so I can stop pining for an Alice!
Sent from my iPhone using Tapatalk
Post by: coffeeshopcoder on Fri, 05 July 2019, 01:43:07
Would this have gasket mount support?
Sent from my Pixel 2 using Tapatalk
its very possible :)
Post by: ilpsxnus on Fri, 05 July 2019, 04:12:15
Very eager for this. Reminds me of the original Microsoft Natural Keyboard I loved so much.I actually still have that one :D
Hope this comes to fruition soon so I can stop pining for an Alice!
Sent from my iPhone using Tapatalk
That's a keeper for sure. I just bought one in mint condition on eBay for $99 but shipping cost me an extra $79.
Is yours showing any signs of yellowing?
Post by: strigif0rm3s on Wed, 10 July 2019, 15:14:08
Post by: aleck on Wed, 10 July 2019, 23:28:29
Post by: WHeisenberg on Mon, 15 July 2019, 13:59:12
Post by: heyitsconan on Mon, 29 July 2019, 20:26:28
Post by: EMC Labs on Tue, 30 July 2019, 02:25:52
Will this be manufactured via KBDFans?
Post by: sarsaparillagorilla on Thu, 01 August 2019, 05:58:03
Post by: dankpupdaddy on Sun, 04 August 2019, 00:42:11
Post by: lolafineday on Sun, 04 August 2019, 06:55:10
Sent from my SM-G975F using Tapatalk
Post by: _ODIN_ on Sun, 04 August 2019, 07:05:35
What makes you guys think this will be on kbdfans?The Fusion60 (same designer) was run on kbdfans too.
Sent from my SM-G975F using Tapatalk
Post by: mattling9 on Fri, 09 August 2019, 10:09:28
Really Really Really hoping this keyboard makes it to a GB!!!!
Post by: ninjacore on Fri, 09 August 2019, 11:18:54
Post by: g_mr_p on Fri, 09 August 2019, 14:55:01
Post by: Vulcan on Sat, 10 August 2019, 01:48:03
Post by: calveeen on Sat, 10 August 2019, 01:48:55
Post by: Vulcan on Sat, 10 August 2019, 01:55:46
Show Image
Show Image
Show Image
Show Image
Hi, I Finally have time to start working on this keyboard again, here the new render. any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
(https://i.ibb.co/8xZ5gtP/mataram-860.jpg) (https://ibb.co/rpr62N5)
(https://i.ibb.co/TMjqDZq/mataram-862.jpg) (https://ibb.co/F4Zqk9q)
(https://i.ibb.co/0j25W3P/mataram-856.jpg) (https://ibb.co/C58LXFx)
(https://i.ibb.co/zxsMf24/mataram-857.jpg) (https://ibb.co/Gp76PM5)
(https://i.ibb.co/Rp5WQb7/mataram-859.jpg) (https://ibb.co/wNv1pgY)
Spec :
- 6061 Aluminum
- Hotswap PCB with RGB Each key
- Thick removable aluminum plate (4.5-5 mm)
- USB type c
The plate is by default thick, but i made it removable and changeable just in case someone want to use flex plate.
Interest Check:
https://goo.gl/forms/4dgDrvRbbdFx2S0H3
Timeline:
- Finish the design in August
- Submit to factory for proto in September
Post by: pcire on Sat, 10 August 2019, 01:57:15
Post by: mattling9 on Sat, 10 August 2019, 03:44:38
Show ImageShow ImageShow ImageShow ImageHi, I Finally have time to start working on this keyboard again, here the new render. any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
(https://i.ibb.co/8xZ5gtP/mataram-860.jpg) (https://ibb.co/rpr62N5)
(https://i.ibb.co/TMjqDZq/mataram-862.jpg) (https://ibb.co/F4Zqk9q)
(https://i.ibb.co/0j25W3P/mataram-856.jpg) (https://ibb.co/C58LXFx)
(https://i.ibb.co/zxsMf24/mataram-857.jpg) (https://ibb.co/Gp76PM5)
(https://i.ibb.co/Rp5WQb7/mataram-859.jpg) (https://ibb.co/wNv1pgY)
Spec :
- 6061 Aluminum
- Hotswap PCB with RGB Each key
- Thick removable aluminum plate (4.5-5 mm)
- USB type c
The plate is by default thick, but i made it removable and changeable just in case someone want to use flex plate.
Interest Check:
https://goo.gl/forms/4dgDrvRbbdFx2S0H3
Timeline:
- Finish the design in August
- Submit to factory for proto in September
Is it possible to have options to have a thick Brass plate aswell?
When it's ready for GB will it be sold on KBDFans?
Post by: Vulcan on Sat, 10 August 2019, 03:56:06
Show ImageShow ImageShow ImageShow ImageHi, I Finally have time to start working on this keyboard again, here the new render. any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
(https://i.ibb.co/8xZ5gtP/mataram-860.jpg) (https://ibb.co/rpr62N5)
(https://i.ibb.co/TMjqDZq/mataram-862.jpg) (https://ibb.co/F4Zqk9q)
(https://i.ibb.co/0j25W3P/mataram-856.jpg) (https://ibb.co/C58LXFx)
(https://i.ibb.co/zxsMf24/mataram-857.jpg) (https://ibb.co/Gp76PM5)
(https://i.ibb.co/Rp5WQb7/mataram-859.jpg) (https://ibb.co/wNv1pgY)
Spec :
- 6061 Aluminum
- Hotswap PCB with RGB Each key
- Thick removable aluminum plate (4.5-5 mm)
- USB type c
The plate is by default thick, but i made it removable and changeable just in case someone want to use flex plate.
Interest Check:
https://goo.gl/forms/4dgDrvRbbdFx2S0H3
Timeline:
- Finish the design in August
- Submit to factory for proto in September
Is it possible to have options to have a thick Brass plate aswell?
When it's ready for GB will it be sold on KBDFans?
It's posible, but it would be really expensive, would make this keyboard really suoer heavy and shiping cost will increase.
Yes GB will be on Kbdfans
Post by: aleck on Sat, 10 August 2019, 17:01:20
Show ImageShow ImageShow ImageShow ImageHi, I Finally have time to start working on this keyboard again, here the new render. any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
(https://i.ibb.co/8xZ5gtP/mataram-860.jpg) (https://ibb.co/rpr62N5)
(https://i.ibb.co/TMjqDZq/mataram-862.jpg) (https://ibb.co/F4Zqk9q)
(https://i.ibb.co/0j25W3P/mataram-856.jpg) (https://ibb.co/C58LXFx)
(https://i.ibb.co/zxsMf24/mataram-857.jpg) (https://ibb.co/Gp76PM5)
(https://i.ibb.co/Rp5WQb7/mataram-859.jpg) (https://ibb.co/wNv1pgY)
Spec :
- 6061 Aluminum
- Hotswap PCB with RGB Each key
- Thick removable aluminum plate (4.5-5 mm)
- USB type c
The plate is by default thick, but i made it removable and changeable just in case someone want to use flex plate.
Interest Check:
https://goo.gl/forms/4dgDrvRbbdFx2S0H3
Timeline:
- Finish the design in August
- Submit to factory for proto in September
Is it possible to have options to have a thick Brass plate aswell?
When it's ready for GB will it be sold on KBDFans?
It's posible, but it would be really expensive, would make this keyboard really suoer heavy and shiping cost will increase.
Yes GB will be on Kbdfans
Nice!
Post by: thornkin on Sat, 10 August 2019, 18:46:36
Post by: MeloDet on Sat, 10 August 2019, 21:56:22
Post by: Vulcan on Sun, 11 August 2019, 03:55:02
Looking nice! Would definitely be interested in some other plate materials though. KBDfans is doing polycarb for the Polaris so I would hope either a Polycarb or POM plate might be doable.
Great idea! Thanks for the input. We will consider that
Post by: mattling9 on Sun, 11 August 2019, 07:30:52
Looking nice! Would definitely be interested in some other plate materials though. KBDfans is doing polycarb for the Polaris so I would hope either a Polycarb or POM plate might be doable.
Great idea! Thanks for the input. We will consider that
Personally i think i would probably take a thin (1.5-2mm) Brass/PC Plate than a thick (4.5-5mm) Alu one. I think a lot of people would prefer for a thinner plate with a higher variety of materials than having a thicker plate in just Alu.
Post by: mattling9 on Sun, 11 August 2019, 07:41:08
Thanks for all your hard work on the project and i really look forward to be able to join the GB! :D
Post by: mattling9 on Sun, 11 August 2019, 08:10:50
Post by: Vulcan on Sun, 11 August 2019, 08:33:52
Looking nice! Would definitely be interested in some other plate materials though. KBDfans is doing polycarb for the Polaris so I would hope either a Polycarb or POM plate might be doable.
Great idea! Thanks for the input. We will consider that
Personally i think i would probably take a thin (1.5-2mm) Brass/PC Plate than a thick (4.5-5mm) Alu one. I think a lot of people would prefer for a thinner plate with a higher variety of materials than having a thicker plate in just Alu.
Reason i made a thick plate is because the PCB will be a how swap removable switch. A thick plate will allow the PCB to be screwed in and hold firmly to the plate, this will make it easier for the user to install and remove switch.
and yes i understand that some people like a thin normal plate and maybe the want to cut their own plate to make it flex more. that is why I made the thick plate a removable plate.
Post by: mattling9 on Sun, 11 August 2019, 09:27:00
Looking nice! Would definitely be interested in some other plate materials though. KBDfans is doing polycarb for the Polaris so I would hope either a Polycarb or POM plate might be doable.
Great idea! Thanks for the input. We will consider that
Personally i think i would probably take a thin (1.5-2mm) Brass/PC Plate than a thick (4.5-5mm) Alu one. I think a lot of people would prefer for a thinner plate with a higher variety of materials than having a thicker plate in just Alu.
Reason i made a thick plate is because the PCB will be a how swap removable switch. A thick plate will allow the PCB to be screwed in and hold firmly to the plate, this will make it easier for the user to install and remove switch.
and yes i understand that some people like a thin normal plate and maybe the want to cut their own plate to make it flex more. that is why I made the thick plate a removable plate.
Oh that's awesome, i completely forgot that this will be hotswap compatible! In that case i agree with you completely, a thick plate is best! If it's possible to be able to get a thick Brass or Polycarbonate plate option that would be amazing and i would definitely be willing to pay a premium for it. :D
Post by: cari on Sun, 11 August 2019, 12:15:31
Post by: kchlam on Sun, 11 August 2019, 14:05:22
Post by: omjak on Mon, 12 August 2019, 01:50:47
any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
I like "MAJA"
Post by: mattling9 on Mon, 12 August 2019, 02:12:48
any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
I like "MAJA"
I know it's not the name of the board, but i would prefer to see Vulcan engraved on the brass weight :D
Post by: strigif0rm3s on Mon, 12 August 2019, 06:07:59
Show ImageShow ImageShow ImageShow ImageHi, I Finally have time to start working on this keyboard again, here the new render. any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
(https://i.ibb.co/8xZ5gtP/mataram-860.jpg) (https://ibb.co/rpr62N5)
(https://i.ibb.co/TMjqDZq/mataram-862.jpg) (https://ibb.co/F4Zqk9q)
(https://i.ibb.co/0j25W3P/mataram-856.jpg) (https://ibb.co/C58LXFx)
(https://i.ibb.co/zxsMf24/mataram-857.jpg) (https://ibb.co/Gp76PM5)
(https://i.ibb.co/Rp5WQb7/mataram-859.jpg) (https://ibb.co/wNv1pgY)
Spec :
- 6061 Aluminum
- Hotswap PCB with RGB Each key
- Thick removable aluminum plate (4.5-5 mm)
- USB type c
The plate is by default thick, but i made it removable and changeable just in case someone want to use flex plate.
Interest Check:
https://goo.gl/forms/4dgDrvRbbdFx2S0H3
Timeline:
- Finish the design in August
- Submit to factory for proto in September
I vote to change the name. Something "cooler"
Sent from my Nexus 6P using Tapatalk
Post by: 2QT2BSTR8 on Mon, 12 August 2019, 08:10:54
Post by: ninjacore on Mon, 12 August 2019, 08:26:43
Post by: KingOfMemes on Mon, 12 August 2019, 08:37:56
I vote to change the name. Something "cooler"Show ImageShow ImageShow ImageShow ImageHi, I Finally have time to start working on this keyboard again, here the new render. any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
(https://i.ibb.co/8xZ5gtP/mataram-860.jpg) (https://ibb.co/rpr62N5)
(https://i.ibb.co/TMjqDZq/mataram-862.jpg) (https://ibb.co/F4Zqk9q)
(https://i.ibb.co/0j25W3P/mataram-856.jpg) (https://ibb.co/C58LXFx)
(https://i.ibb.co/zxsMf24/mataram-857.jpg) (https://ibb.co/Gp76PM5)
(https://i.ibb.co/Rp5WQb7/mataram-859.jpg) (https://ibb.co/wNv1pgY)
Spec :
- 6061 Aluminum
- Hotswap PCB with RGB Each key
- Thick removable aluminum plate (4.5-5 mm)
- USB type c
The plate is by default thick, but i made it removable and changeable just in case someone want to use flex plate.
Interest Check:
https://goo.gl/forms/4dgDrvRbbdFx2S0H3
Timeline:
- Finish the design in August
- Submit to factory for proto in September
Sent from my Nexus 6P using Tapatalk
I think it's pretty cool considering it's the name of one of the finest Hindu Empires
Post by: Kokaloo on Mon, 12 August 2019, 13:08:50
Show ImageShow ImageShow ImageShow ImageHi, I Finally have time to start working on this keyboard again, here the new render. any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
(https://i.ibb.co/8xZ5gtP/mataram-860.jpg) (https://ibb.co/rpr62N5)
(https://i.ibb.co/TMjqDZq/mataram-862.jpg) (https://ibb.co/F4Zqk9q)
(https://i.ibb.co/0j25W3P/mataram-856.jpg) (https://ibb.co/C58LXFx)
(https://i.ibb.co/zxsMf24/mataram-857.jpg) (https://ibb.co/Gp76PM5)
(https://i.ibb.co/Rp5WQb7/mataram-859.jpg) (https://ibb.co/wNv1pgY)
Spec :
- 6061 Aluminum
- Hotswap PCB with RGB Each key
- Thick removable aluminum plate (4.5-5 mm)
- USB type c
The plate is by default thick, but i made it removable and changeable just in case someone want to use flex plate.
Interest Check:
https://goo.gl/forms/4dgDrvRbbdFx2S0H3
Timeline:
- Finish the design in August
- Submit to factory for proto in September
Is it possible to have options to have a thick Brass plate aswell?
When it's ready for GB will it be sold on KBDFans?
It's posible, but it would be really expensive, would make this keyboard really suoer heavy and shiping cost will increase.
Yes GB will be on Kbdfans
Wait so does this mean... An unlimited GB? :eek:
Post by: Hell-es on Mon, 12 August 2019, 14:54:10
Post by: tonydatigeryo on Mon, 12 August 2019, 16:10:08
Post by: Aevyn on Mon, 12 August 2019, 22:58:29
Sent from my GM1915 using Tapatalk
Post by: PikaJoyce on Tue, 13 August 2019, 01:21:14
Something like this ;D ;D ;D+1 I think the staggered keys on the right give the entire board more balance compared to non staggered.
I was also thinking of maybe a design for the weight instead of just the text for majapahit. Not a huge fan of the font :(
Post by: strigif0rm3s on Tue, 13 August 2019, 05:17:53
Sent from my Nexus 6P using Tapatalk
Post by: wholypantalones on Tue, 13 August 2019, 07:22:54
No limit is excellent as it allows a lot of people to get in on it without paying huge on the secondary market... one of my biggest gripes with this hobby!
But it also means longer production and QC times ;)
Post by: roguesystem087 on Tue, 13 August 2019, 08:19:15
Post by: KingOfMemes on Tue, 13 August 2019, 08:27:46
And it can be nice to have a keyboard that nobody else has. The limited/unique factor is niceNo limit is excellent as it allows a lot of people to get in on it without paying huge on the secondary market... one of my biggest gripes with this hobby!
But it also means longer production and QC times ;)
Post by: bru on Tue, 13 August 2019, 09:50:25
Something like this ;D ;D ;D+1 this would be :fire:
Post by: wholypantalones on Tue, 13 August 2019, 12:04:51
And it can be nice to have a keyboard that nobody else has. The limited/unique factor is niceNo limit is excellent as it allows a lot of people to get in on it without paying huge on the secondary market... one of my biggest gripes with this hobby!
But it also means longer production and QC times ;)
Also selling it for $3k+ is fun sometimes I hear.
Post by: ppnp253 on Tue, 13 August 2019, 12:11:52
This is from the wiki on Majapahit.....maybe a logo or graphic similar- on the bottom? Instead of text.
Sent from my Nexus 6P using Tapatalk
I'm leaning more towards "MAJA" only because I can never spell or pronounce Majapahit correctly.
+1 to additional plate materials. I'd be willing to pay more for different plates.
+1 to a geometric/logo on weight vs text. Majapahit also has a lot of references to the sun/mandala/Hindu gods patterns, so I think a patterned weight would look nice.
Also, is there enough interest to make it gasket mounted? Since you asked the question on the IC form.
Post by: KingOfMemes on Tue, 13 August 2019, 12:18:29
Buying it for 3k just proves the value of having something limited/unique. Either way, I'm glad there is no limit so I can get one at a good price \o/And it can be nice to have a keyboard that nobody else has. The limited/unique factor is niceNo limit is excellent as it allows a lot of people to get in on it without paying huge on the secondary market... one of my biggest gripes with this hobby!
But it also means longer production and QC times ;)
Also selling it for $3k+ is fun sometimes I hear.
Post by: Kokaloo on Tue, 13 August 2019, 12:54:52
Please please pleaasseee offer a PCB that is non-hotswap.
Different material plated would be very nice, my vote is for FR4 or PC, or at the very least upload plate file so we can make our own!
Staggered macro row is definitely more appealing to me, but I'm sure you have your reasons.
Thanks!
Post by: KingOfMemes on Tue, 13 August 2019, 13:22:02
Please please pleaasseee offer a PCB that is non-hotswap.I second this motion
Post by: r4wromg on Tue, 13 August 2019, 19:01:24
Buying it for 3k just proves the value of having something limited/unique. Either way, I'm glad there is no limit so I can get one at a good price \o/And it can be nice to have a keyboard that nobody else has. The limited/unique factor is niceNo limit is excellent as it allows a lot of people to get in on it without paying huge on the secondary market... one of my biggest gripes with this hobby!
But it also means longer production and QC times ;)
Also selling it for $3k+ is fun sometimes I hear.
Has OP confirmed that there is no limit? IIRC his last gb (Fusion60), there was a 50 unit limit even though that was also run on KBDfans
Post by: nasp on Tue, 13 August 2019, 19:22:23
Post by: Tre3Cycl3S on Tue, 13 August 2019, 19:31:03
I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA”
I actually much prefer the original name “Majapahit”, in part due to the reference to the ancient empire.
Here is an idea, if you are leaning towards renaming it “MAJA”: apparently, “maja” is Javanese for the bael fruit. So, maybe the design of the brass weight can incorporate this fact, e.g. the brass weight is in the shape of a bael fruit, or an engraving of the fruit on the brass weight.
Incidentally, you could still do that even if you retain the name as “Majapahit”, as “pahit” is the Malay/Indonesian word meaning “bitter”, in reference to the bitterness of the fruit.
Post by: 2QT2BSTR8 on Tue, 13 August 2019, 20:49:12
Has he said that it will be run with the assistance of KBDFans again?Yes
Post by: lolafineday on Tue, 13 August 2019, 22:00:13
Sent from my SM-G975F using Tapatalk
Post by: ilpsxnus on Thu, 15 August 2019, 03:23:51
Perhaps consider a Vulcan logo engraved on one of the corners of the rear bezel for infill, and the Majapahit kaliedascope logo on the weight?
Post by: Poesjuh on Thu, 15 August 2019, 03:56:07
Any specific reason to leave this gap here? Are you considering a logo of some sort?
(https://uploads.tapatalk-cdn.com/20190815/f28fcf3593c8b293bdc7af26d42ff1d2.jpg)
Sent from my iPhone using Tapatalk
Post by: Vulcan on Thu, 15 August 2019, 04:21:18
I feel like the keyboard is too non symmetrical, if you could add 1 pillar of macros on the left side(staggered) to make the length of the left side and right the same, it would look much nicer imo.
Sent from my SM-G975F using Tapatalk
I agree, thank you for the input, which one do you guys think is better?
Option 1
(https://i.ibb.co/5MmzcjR/Capture1.png) (https://ibb.co/smnD31V)
Option 2
(https://i.ibb.co/GC4QwBk/Capture2.png) (https://ibb.co/ygcFTG5)
For the stagger i personally thinks it makes the layout looks messy.. I thinks keeping it straight makes it cleaner
(https://i.ibb.co/0rTBYnk/Capture3.png) (https://ibb.co/Fz2s8h9)
Post by: SlamMakanen on Thu, 15 August 2019, 05:09:31
Sent from my iPhone using Tapatalk
Post by: mattling9 on Thu, 15 August 2019, 05:46:32
I would prefer a single row of staggered function keys on the left or right not both. my preference would probably be on the right to fill up the space made by the arrow keys.
Probably not what you're going for but i would love it if it was changed to the original Alice layout. If it aint broke don't fix it.
Post by: 2QT2BSTR8 on Thu, 15 August 2019, 06:54:30
Post by: wholypantalones on Thu, 15 August 2019, 06:59:41
Post by: strigif0rm3s on Thu, 15 August 2019, 07:37:01
Sent from my Nexus 6P using Tapatalk
Post by: aleck on Thu, 15 August 2019, 09:13:47
Personally, I like 1 the most.Show ImageShow ImageI feel like the keyboard is too non symmetrical, if you could add 1 pillar of macros on the left side(staggered) to make the length of the left side and right the same, it would look much nicer imo.
Sent from my SM-G975F using Tapatalk
I agree, thank you for the input, which one do you guys think is better?
Option 1
(https://i.ibb.co/5MmzcjR/Capture1.png) (https://ibb.co/smnD31V)
Option 2
(https://i.ibb.co/GC4QwBk/Capture2.png) (https://ibb.co/ygcFTG5)
For the stagger i personally thinks it makes the layout looks messy.. I thinks keeping it straight makes it cleaner
(https://i.ibb.co/0rTBYnk/Capture3.png) (https://ibb.co/Fz2s8h9)
Post by: KingOfMemes on Thu, 15 August 2019, 09:24:44
Post by: Create_alt_delete on Thu, 15 August 2019, 09:26:43
Option 2. Maybe use the blank space under the left-side column for a logo?
Sent from my GM1917 using Tapatalk
Post by: airyimbin on Thu, 15 August 2019, 09:42:26
Sent from my SM-N960U using Tapatalk
Post by: Paddel06 on Thu, 15 August 2019, 09:46:16
Post by: KingOfMemes on Thu, 15 August 2019, 09:47:55
Personally I would like no left function keys at all.If this were an option I would also have voted this
Post by: Evo_Spec on Thu, 15 August 2019, 09:52:15
Post by: ninjacore on Thu, 15 August 2019, 10:15:46
Post by: mattling9 on Thu, 15 August 2019, 10:19:10
Post by: KingOfMemes on Thu, 15 August 2019, 10:33:01
Original design, best design100%
Post by: _ODIN_ on Thu, 15 August 2019, 11:01:25
I also like no left function keys at all like your original design but staggered function keys on the right.+1
Gesendet von meinem H8416 mit Tapatalk
Post by: mattling9 on Thu, 15 August 2019, 16:56:32
I also like no left function keys at all like your original design but staggered function keys on the right.
This is exactly what I would like too
Post by: r4wromg on Thu, 15 August 2019, 18:44:28
Original design, best design
Agreed, feels a bit too busy with function keys on both sides.
Post by: trg1234 on Thu, 15 August 2019, 22:19:20
Post by: MeloDet on Thu, 15 August 2019, 22:40:37
Post by: Dissitesuxba11s on Fri, 16 August 2019, 09:06:22
Post by: Zilleon on Fri, 16 August 2019, 10:07:13
Post by: dankpupdaddy on Fri, 16 August 2019, 10:16:56
The option with no keys on the left side is my choice regardless of stagger or not.No keys on the left, staggered keys on the right would be :thumb:
Post by: airyimbin on Fri, 16 August 2019, 10:22:06
Sent from my SM-N960U using Tapatalk
Post by: mrkantz on Fri, 16 August 2019, 10:38:22
Post by: Vulcan on Fri, 16 August 2019, 10:39:37
Post by: ninjacore on Fri, 16 August 2019, 14:31:29
Post by: airyimbin on Fri, 16 August 2019, 14:40:42
Post by: ilpsxnus on Fri, 16 August 2019, 15:00:52
I prefer staggered function keys on the right, but vertically aligned is OK as well.
Either way, I'm still going to buy it.
Post by: ppnp253 on Fri, 16 August 2019, 15:08:01
Post by: CodeMayhem on Fri, 16 August 2019, 19:59:55
Having a second B for ergonomic keyboards is a good feature.
Consider USB-C.
What about a second x for Dvorak users 😅
Post by: DSlayerZX on Sat, 17 August 2019, 00:52:03
as in the right backspace, enter, etc all the same width as the left side XD
Post by: briemens on Sat, 17 August 2019, 01:59:07
Post by: omjak on Sat, 17 August 2019, 14:29:41
Post by: mattling9 on Sun, 18 August 2019, 15:20:24
Show Image
Show Image
Show Image
Show Image
Hi, I Finally have time to start working on this keyboard again, here the new render. any feedback? I see many people find the name to hard to pronounce, should we change it or just make it simpler by just calling it "MAJA"
(https://i.ibb.co/8xZ5gtP/mataram-860.jpg) (https://ibb.co/rpr62N5)
(https://i.ibb.co/TMjqDZq/mataram-862.jpg) (https://ibb.co/F4Zqk9q)
(https://i.ibb.co/0j25W3P/mataram-856.jpg) (https://ibb.co/C58LXFx)
(https://i.ibb.co/zxsMf24/mataram-857.jpg) (https://ibb.co/Gp76PM5)
(https://i.ibb.co/Rp5WQb7/mataram-859.jpg) (https://ibb.co/wNv1pgY)
Spec :
- 6061 Aluminum
- Hotswap PCB with RGB Each key
- Thick removable aluminum plate (4.5-5 mm)
- USB type c
The plate is by default thick, but i made it removable and changeable just in case someone want to use flex plate.
Interest Check:
https://goo.gl/forms/4dgDrvRbbdFx2S0H3
Timeline:
- Finish the design in August
- Submit to factory for proto in September
Wil there be the option for a Polycarbonate Case at an additional cost like most boards on KBDFans? A few boards now are evening running opaque / black Polycarbonate (Leaf 60 + Think6.5) which i think looks AMAZING. Please Please Please can we try and make this an option. i would happily pay big big $$$$ to get a black / opaque polycarbonate Majaphait!
Post by: Protein on Sun, 18 August 2019, 16:19:09
Post by: Tree_ on Sun, 18 August 2019, 22:29:42
Post by: sozo on Sun, 18 August 2019, 22:34:00
Post by: Vizir on Wed, 28 August 2019, 10:55:59
https://geekhack.org/index.php?topic=102180.new#new
Post by: Kokaloo on Wed, 28 August 2019, 11:03:28
another kb which looks quite similarExcept that is layered acrylic/POM and sandwich mount lol
https://geekhack.org/index.php?topic=102180.new#new
There's been a lot of Alice-like boards popping up, can even get PCB from project keyboard and lasercut files that he has publicly available.
Post by: mattling9 on Fri, 06 September 2019, 07:59:59
I would be interested if there were options for case and plate materials like Polycarbonate or Brass.
Can you confirm if this will be considered or if it's going to be Aluminium only?
Post by: Vulcan on Fri, 06 September 2019, 13:05:30
Any Updates On This Project?
I would be interested if there were options for case and plate materials like Polycarbonate or Brass.
Can you confirm if this will be considered or if it's going to be Aluminium only?
polycarbonate yes, but full brass version probably no
Post by: EMC Labs on Fri, 06 September 2019, 20:00:05
Any Updates On This Project?
I would be interested if there were options for case and plate materials like Polycarbonate or Brass.
Can you confirm if this will be considered or if it's going to be Aluminium only?
polycarbonate yes, but full brass version probably no
Any projected GB date as of yet?
Post by: Vulcan on Fri, 06 September 2019, 20:29:12
Any Updates On This Project?
I would be interested if there were options for case and plate materials like Polycarbonate or Brass.
Can you confirm if this will be considered or if it's going to be Aluminium only?
polycarbonate yes, but full brass version probably no
Any projected GB date as of yet?
we are still waiting for the prototype to finish
Post by: Jubileus on Sun, 08 September 2019, 10:47:49
Post by: mattling9 on Sun, 08 September 2019, 11:50:38
Any Updates On This Project?
I would be interested if there were options for case and plate materials like Polycarbonate or Brass.
Can you confirm if this will be considered or if it's going to be Aluminium only?
polycarbonate yes, but full brass version probably no
Any projected GB date as of yet?
we are still waiting for the prototype to finish
That's awesome! How long can we expect until you receive the prototype?
Post by: snaranda0305 on Thu, 12 September 2019, 01:20:27
Post by: PikaJoyce on Thu, 12 September 2019, 01:29:59
when will GB happen ?I gather that it will happen after the Fusion60 GB has completed shipping out and after prototyping has completed.
Post by: Vulcan on Thu, 12 September 2019, 09:12:11
when will GB happen ?
When is something i cant answer right now, there are things that needed to be discus with kbdfans and factory whether they can handle and manufacture the design or not.
Post by: Vulcan on Thu, 12 September 2019, 13:30:27
(https://i.ibb.co/nn3YVyv/mataram-2-859.jpg) (https://ibb.co/HxNbMys)
(https://i.ibb.co/MhmBJTt/untitled-856.jpg) (https://ibb.co/SxzfZTM)
(https://i.ibb.co/RvvwcyL/sangtuary-riberth-8510.jpg) (https://ibb.co/8KKZ9cF)
(https://i.ibb.co/XD0qGY3/sangtuary-riberth-8513.jpg) (https://ibb.co/vhySMXQ)
(https://i.ibb.co/DKFfmvZ/sangtuary-riberth-8512.jpg) (https://ibb.co/KygxBfJ)
(https://i.ibb.co/WBPZ3M4/sangtuary-riberth-8511.jpg) (https://ibb.co/h2ZbM4J)
(https://i.ibb.co/nccgSRs/sangtuary-riberth-8514.jpg) (https://ibb.co/d22Wy70)
Post by: lorenzocodes on Thu, 12 September 2019, 13:37:22
Inviato dal mio ONEPLUS A6013 utilizzando Tapatalk
Post by: hansikhouse on Thu, 12 September 2019, 13:43:03
Post by: airyimbin on Thu, 12 September 2019, 13:43:36
Show Image
Show Image
Show Image
Show Image
Show Image
Show Image
(https://i.ibb.co/nn3YVyv/mataram-2-859.jpg) (https://ibb.co/HxNbMys)
(https://i.ibb.co/MhmBJTt/untitled-856.jpg) (https://ibb.co/SxzfZTM)
(https://i.ibb.co/RvvwcyL/sangtuary-riberth-8510.jpg) (https://ibb.co/8KKZ9cF)
(https://i.ibb.co/XD0qGY3/sangtuary-riberth-8513.jpg) (https://ibb.co/vhySMXQ)
(https://i.ibb.co/DKFfmvZ/sangtuary-riberth-8512.jpg) (https://ibb.co/KygxBfJ)
(https://i.ibb.co/WBPZ3M4/sangtuary-riberth-8511.jpg) (https://ibb.co/h2ZbM4J)
(https://i.ibb.co/nccgSRs/sangtuary-riberth-8514.jpg) (https://ibb.co/d22Wy70)
This is amazing. Can't wait
Sent from my SM-N960U using Tapatalk
Post by: mattling9 on Thu, 12 September 2019, 13:43:48
Post by: dankpupdaddy on Thu, 12 September 2019, 13:45:51
Post by: Vulcan on Thu, 12 September 2019, 13:52:47
this is Majapahit logo
(https://i.ibb.co/PhZrqTm/image-s-850x0.jpg) (https://ibb.co/Kqj5TN0)
and this is Majapahit flag
(https://i.ibb.co/TMbqknw/Bendera-Pelayaran-Majapahit.jpg) (https://ibb.co/7tRNXTS)
and i combine it, did a remade on the logo
(https://i.ibb.co/LnXnxPS/mataram-2-859.jpg) (https://ibb.co/Gc4cWJ7)
Post by: thornkin on Sat, 14 September 2019, 01:30:55
Post by: 2QT2BSTR8 on Sat, 14 September 2019, 01:39:02
Post by: ramnes on Sat, 14 September 2019, 07:00:54
Post by: Vulcan on Sat, 14 September 2019, 10:37:53
Post by: Vulcan on Sat, 14 September 2019, 12:10:24
BRASS WEIGHT POLLING
Option 1
(https://i.ibb.co/q5pvzXc/sangtuary-riberth-8512.jpg) (https://ibb.co/q5pvzXc) (https://i.ibb.co/1qTSbfv/sangtuary-riberth-8513.jpg) (https://ibb.co/1qTSbfv)
(https://i.ibb.co/q5pvzXc/sangtuary-riberth-8512.jpg) (https://ibb.co/q5pvzXc) (https://i.ibb.co/1qTSbfv/sangtuary-riberth-8513.jpg) (https://ibb.co/1qTSbfv)
Option 2
(https://i.ibb.co/Rhc4PbD/sangtuary-riberth-84560.jpg) (https://ibb.co/Rhc4PbD)(https://i.ibb.co/rHCgsQc/sangtuary-riberth-84559.jpg) (https://ibb.co/rHCgsQc)
(https://i.ibb.co/Rhc4PbD/sangtuary-riberth-84560.jpg) (https://ibb.co/Rhc4PbD)(https://i.ibb.co/rHCgsQc/sangtuary-riberth-84559.jpg) (https://ibb.co/rHCgsQc)
GOOGLE FORM POLLING
Please fill here
https://forms.gle/2XZVyuwJATqMa8mx7
Please fill here
https://forms.gle/2XZVyuwJATqMa8mx7
Post by: Evo_Spec on Sat, 14 September 2019, 13:26:08
Would option 1 be more expensive than option 2 to machine?
Either way, I prefer option 1.
Post by: ilpsxnus on Sat, 14 September 2019, 17:00:28
To be honest, the translation of the Majapahit logo looks like a 4-point Japanese shuriken and I am not digging it.
A simple etch of the original logo in a similar aged/worn style of the Vitruvian Man on the weight would be classy.
That would also bring the cost down for machining.
Post by: Vulcan on Sat, 14 September 2019, 17:10:45
Looks great, but please consider making the weight less complex (simpler peek-a-boo elements).
To be honest, the translation of the Majapahit logo looks like a 4-point Japanese shuriken and I am not digging it.
A simple etch of the original logo in a similar aged/worn style of the Vitruvian Man on the weight would be classy.
That would also bring the cost down for machining.
ok, what is a simpler peek-a-boo elements? do you have photo or picture for example?
Post by: Jubileus on Sun, 15 September 2019, 08:05:51
Show Image
Show Image
So this is a little insight on the logo..
this is Majapahit logo
(https://i.ibb.co/PhZrqTm/image-s-850x0.jpg) (https://ibb.co/Kqj5TN0)
and this is Majapahit flag
(https://i.ibb.co/TMbqknw/Bendera-Pelayaran-Majapahit.jpg) (https://ibb.co/7tRNXTS)
and i combine it, did a remade on the logo
(https://i.ibb.co/LnXnxPS/mataram-2-859.jpg) (https://ibb.co/Gc4cWJ7)
Why not just have a weight similar to the logo above and have it engraved/recessed circle inside? I think its much more simpler and cleaner.
I'd make a rough visual but I suck at photoshop.
It's basically like the logo above without the minute details of the figures.
Post by: Vulcan on Sun, 15 September 2019, 18:30:24
Show ImageShow ImageSo this is a little insight on the logo..
this is Majapahit logo
(https://i.ibb.co/PhZrqTm/image-s-850x0.jpg) (https://ibb.co/Kqj5TN0)
and this is Majapahit flag
(https://i.ibb.co/TMbqknw/Bendera-Pelayaran-Majapahit.jpg) (https://ibb.co/7tRNXTS)
and i combine it, did a remade on the logo
(https://i.ibb.co/LnXnxPS/mataram-2-859.jpg) (https://ibb.co/Gc4cWJ7)
Why not just have a weight similar to the logo above and have it engraved/recessed circle inside? I think its much more simpler and cleaner.
I'd make a rough visual but I suck at photoshop.
It's basically like the logo above without the minute details of the figures.
CNC engraving or laser engraving?
Post by: hillmu on Sun, 15 September 2019, 19:06:03
通过我的 ONEPLUS A6000 上的 Tapatalk发言
Post by: Jubileus on Mon, 16 September 2019, 00:43:16
CNC engraving or laser engraving?
CNC engraving or whatever makes sense.
Post by: Vulcan on Mon, 16 September 2019, 01:10:14
CNC engraving or laser engraving?
CNC engraving or whatever makes sense.
OK I will consider that.. thank you for the input
Post by: airyimbin on Mon, 16 September 2019, 08:24:08
Post by: Vulcan on Mon, 16 September 2019, 08:33:35
Post by: Solotov on Mon, 16 September 2019, 08:41:24
Post by: Popopro on Mon, 16 September 2019, 12:45:02
Post by: strigif0rm3s on Tue, 17 September 2019, 08:21:13
Looks great, but please consider making the weight less complex (simpler peek-a-boo elements).
To be honest, the translation of the Majapahit logo looks like a 4-point Japanese shuriken and I am not digging it.
A simple etch of the original logo in a similar aged/worn style of the Vitruvian Man on the weight would be classy.
That would also bring the cost down for machining.
I second this. I like the original design better - sticks with the roots.
Love the remake, but prefer the original classy design.
ok, what is a simpler peek-a-boo elements? do you have photo or picture for example?
Post by: SUB01 on Wed, 18 September 2019, 00:54:47
Looks great, but please consider making the weight less complex (simpler peek-a-boo elements).To each their own, but I think that this new design looks good. Not every keyboard has to look minimalistic. Sometimes a more out there approach says more about the designer the people that own it.
To be honest, the translation of the Majapahit logo looks like a 4-point Japanese shuriken and I am not digging it.
A simple etch of the original logo in a similar aged/worn style of the Vitruvian Man on the weight would be classy.
That would also bring the cost down for machining.
I second this. I like the original design better - sticks with the roots.
Love the remake, but prefer the original classy design.
ok, what is a simpler peek-a-boo elements? do you have photo or picture for example?
Post by: ilpsxnus on Wed, 18 September 2019, 17:36:34
Looks great, but please consider making the weight less complex (simpler peek-a-boo elements).To each their own, but I think that this new design looks good. Not every keyboard has to look minimalistic. Sometimes a more out there approach says more about the designer the people that own it.
To be honest, the translation of the Majapahit logo looks like a 4-point Japanese shuriken and I am not digging it.
A simple etch of the original logo in a similar aged/worn style of the Vitruvian Man on the weight would be classy.
That would also bring the cost down for machining.
I second this. I like the original design better - sticks with the roots.
Love the remake, but prefer the original classy design.
ok, what is a simpler peek-a-boo elements? do you have photo or picture for example?
I was thinking the weight could have just one octagonal star protrusion in the form of the Surya Majapahit emblem.
The deities and sun rays could be laser engraved on it (or milled, unless it's too expensive).
But really, that's just my opinion.
And in no way is this meant as a knock to Vulcan.
Still going to buy it.
Post by: ilpsxnus on Wed, 18 September 2019, 19:28:31
Looks great, but please consider making the weight less complex (simpler peek-a-boo elements).
To be honest, the translation of the Majapahit logo looks like a 4-point Japanese shuriken and I am not digging it.
A simple etch of the original logo in a similar aged/worn style of the Vitruvian Man on the weight would be classy.
That would also bring the cost down for machining.
ok, what is a simpler peek-a-boo elements? do you have photo or picture for example?
Something like this. Just the emblem visible on the bottom of the keyboard.
Post by: Vulcan on Wed, 18 September 2019, 20:05:34
Looks great, but please consider making the weight less complex (simpler peek-a-boo elements).
To be honest, the translation of the Majapahit logo looks like a 4-point Japanese shuriken and I am not digging it.
A simple etch of the original logo in a similar aged/worn style of the Vitruvian Man on the weight would be classy.
That would also bring the cost down for machining.
ok, what is a simpler peek-a-boo elements? do you have photo or picture for example?
Something like this. Just the emblem visible on the bottom of the keyboard.
wow did you make that ? i was also planing to do that at the beginning. but it would be expensive, the only thing we could do if we want to make that is make with laser engrave. but unfortunately kbdfans cant do laser engraving..
What do you think of this ? the meaning and essential of the logo didn't change and this would make the price much lower and less complex. please give suggestions and feed back, is it better or worse?. thank you
(https://i.ibb.co/0yZs3yr/Capture.jpg) (https://ibb.co/Jj23PjH)
(https://i.ibb.co/KFM1NWJ/Capture3.jpg) (https://ibb.co/vZ7tskS)
(https://i.ibb.co/ctryhfc/Capture234.jpg) (https://ibb.co/J2scj6R)
Post by: ilpsxnus on Wed, 18 September 2019, 20:27:05
Show ImageShow ImageLooks great, but please consider making the weight less complex (simpler peek-a-boo elements).
To be honest, the translation of the Majapahit logo looks like a 4-point Japanese shuriken and I am not digging it.
A simple etch of the original logo in a similar aged/worn style of the Vitruvian Man on the weight would be classy.
That would also bring the cost down for machining.
ok, what is a simpler peek-a-boo elements? do you have photo or picture for example?
Something like this. Just the emblem visible on the bottom of the keyboard.
wow did you make that ? i was also planing to do that at the beginning. but it would be expensive, the only thing we could do if we want to make that is make with laser engrave. but unfortunately kbdfans cant do laser engraving..
What do you think of this ? the meaning and essential of the logo didn't change and this would make the price much lower and less complex. please give suggestions and feed back. thank you
(https://i.ibb.co/0yZs3yr/Capture.jpg) (https://ibb.co/Jj23PjH)
(https://i.ibb.co/KFM1NWJ/Capture3.jpg) (https://ibb.co/vZ7tskS)
(https://i.ibb.co/ctryhfc/Capture234.jpg) (https://ibb.co/J2scj6R)
That looks really good, I want one so bad.
Bagus, and Terimah Kasih!
Post by: 2QT2BSTR8 on Wed, 18 September 2019, 20:32:13
Post by: Dissitesuxba11s on Wed, 18 September 2019, 21:14:40
Post by: _ODIN_ on Thu, 19 September 2019, 02:56:16
Gesendet von meinem H8416 mit Tapatalk
Post by: airyimbin on Thu, 19 September 2019, 07:25:35
Sent from my SM-N960U using Tapatalk
Post by: bobdenard on Thu, 19 September 2019, 07:49:41
Post by: Vulcan on Fri, 20 September 2019, 03:11:08
(https://i.ibb.co/PwpzgWG/Key-Shot-Chip-Clip-2341.jpg) (https://ibb.co/ChdsQ9K)
Post by: Vulcan on Sat, 21 September 2019, 08:24:18
(https://i.ibb.co/QHh8SH2/majapahit-sangtuary-166.jpg) (https://ibb.co/LgBQjgL)
(https://i.ibb.co/6Zss8pG/majapahit-sangtuary-167.jpg) (https://ibb.co/BPssG7v)
(https://i.ibb.co/7KnjWTb/majapahit-sangtuary-168.jpg) (https://ibb.co/L1xYtqv)
(https://i.ibb.co/1qD8G0X/majapahit-sangtuary-169.jpg) (https://ibb.co/ts78pH2)
Post by: airyimbin on Sat, 21 September 2019, 09:01:27
Sent from my SM-N960U using Tapatalk
Post by: hansikhouse on Sat, 21 September 2019, 10:21:11
Post by: Im_Humble on Sat, 21 September 2019, 11:06:04
Post by: _ODIN_ on Sat, 21 September 2019, 11:07:47
Gesendet von meinem H8416 mit Tapatalk
Post by: PotatoTM on Sat, 21 September 2019, 15:18:16
Post by: Coneree on Sat, 21 September 2019, 22:01:09
Post by: NotYeMK on Thu, 26 September 2019, 10:54:23
Post by: Vulcan on Fri, 27 September 2019, 12:03:24
(https://i.ibb.co/0YfHPBs/Maja-plate-Color-32.jpg) (https://ibb.co/GCVzgsH)
(https://i.ibb.co/n7rJ0VT/Majapahit-Color-Case.jpg) (https://ibb.co/qNBQn4z)
So those are the colors,
- Ink Blue
- Red Dahlia
- Black Onyx
- Off White
- Pine Grove
- Rose Gold
i haven't talk to KBDfans if it's possible to make it like that, but if there are many likes maybe KBDfans could work it out..
Post by: _ODIN_ on Fri, 27 September 2019, 12:31:41
Show Image
Show Image
(https://i.ibb.co/6BgLhN9/Key-Shot-Chip-Clip-24.jpg) (https://ibb.co/tX8Ff3j)
(https://i.ibb.co/0YfHPBs/Maja-plate-Color-32.jpg) (https://ibb.co/GCVzgsH)
(https://i.ibb.co/n7rJ0VT/Majapahit-Color-Case.jpg) (https://ibb.co/qNBQn4z)
So those are the colors,
- Ink Blue
- Red Dahlia
- Black Onyx
- Off White
- Pine Grove
- Rose Gold
i haven't talk to KBDfans if it's possible to make it like that, but if there are many likes maybe KBDfans could work it out..
Amazing! I am ready to order.
Gesendet von meinem H8416 mit Tapatalk
Post by: hansikhouse on Fri, 27 September 2019, 12:42:40
Post by: iridescent22 on Fri, 27 September 2019, 12:44:20
Post by: Dissitesuxba11s on Fri, 27 September 2019, 13:32:19
Also, did you ever discuss what the mounting system would be?
Post by: Kerasan on Fri, 27 September 2019, 13:50:46
Show Image
Show Image
(https://i.ibb.co/6BgLhN9/Key-Shot-Chip-Clip-24.jpg) (https://ibb.co/tX8Ff3j)
(https://i.ibb.co/0YfHPBs/Maja-plate-Color-32.jpg) (https://ibb.co/GCVzgsH)
(https://i.ibb.co/n7rJ0VT/Majapahit-Color-Case.jpg) (https://ibb.co/qNBQn4z)
So those are the colors,
- Ink Blue
- Red Dahlia
- Black Onyx
- Off White
- Pine Grove
- Rose Gold
i haven't talk to KBDfans if it's possible to make it like that, but if there are many likes maybe KBDfans could work it out..
All this must happen, I'm in for rose gold :eek:
EDIT:
Is the finish powder coating or anodizing?
Post by: nyry43 on Fri, 27 September 2019, 18:03:46
Post by: Lisinge on Fri, 27 September 2019, 18:18:16
Post by: Yahhms on Fri, 27 September 2019, 18:28:27
Post by: Steezus on Fri, 27 September 2019, 20:18:13
Post by: Vulcan on Sat, 28 September 2019, 06:27:27
Group Buy have many uncertainty that could disappoint buyer or GB participant such as color being different from render, shiping time getting delayed and many other stuff that is unpredictable.
We want to may our buyer happy and satisfied when they recive this case. So we think FCFS is best.. we will make a number of case and put it up on sale.
This way buyer will get the case faster without waiting a long time and will know exactly how the color turns out before they purchase.
But the down side is for this methode KBDfans cant make many color case.. they told me to pick only 3 color and the plate will be brass by default... for color anodize plate will be sold separately after sometimes.
I will make a poll to pick from those color which is the top 3 that will be made.(https://uploads.tapatalk-cdn.com/20190928/980f27b476990d0b46a1109c165ad9cc.jpg)
Sent from my SM-G610F using Tapatalk
Post by: Yahhms on Sat, 28 September 2019, 09:34:52
Post by: PotatoTM on Sat, 28 September 2019, 16:31:12
I just got confirmation from kbdfans.. they dont do GB anymore.. the methode for this is FCFS..
Unfortunate but I guess it does reduce uncertainties, hope enough are made that those who want to get one can!
Post by: Vulcan on Sat, 28 September 2019, 23:23:28
Please make those color options happen KBDFans!Mouting system is top mount. But with foam to dampen things.. Im not a fan of gasket... well actually i never try one and kinda scared to try.
Also, did you ever discuss what the mounting system would be?
Here is a simple render.. i will do better render later :D
(https://uploads.tapatalk-cdn.com/20190929/1ea8590033fda350eeabc1ad7d99f014.jpg)
Sent from my SM-G610F using Tapatalk
Post by: Vulcan on Sun, 29 September 2019, 09:38:41
"Color Polling"
Kbdfans limit me with only 3 color to manufacture. please help me choose which color you think is best for Maja. Google Form is Below.
https://forms.gle/CVGyZDVjEQtEufcJ8
(https://i.ibb.co/n7rJ0VT/Majapahit-Color-Case.jpg) (https://ibb.co/qNBQn4z)
Kbdfans limit me with only 3 color to manufacture. please help me choose which color you think is best for Maja. Google Form is Below.
https://forms.gle/CVGyZDVjEQtEufcJ8
(https://i.ibb.co/n7rJ0VT/Majapahit-Color-Case.jpg) (https://ibb.co/qNBQn4z)
Post by: airyimbin on Sun, 29 September 2019, 09:44:42
Sent from my SM-N960U using Tapatalk
Post by: hyppialonso on Sun, 29 September 2019, 10:19:24
Post by: airyimbin on Sun, 29 September 2019, 10:29:18
Sent from my SM-N960U using Tapatalk
Post by: Vulcan on Sun, 29 September 2019, 22:34:36
Yeah, so there must be a maximum right?100 case will be made
Sent from my SM-N960U using Tapatalk
Sent from my SM-G610F using Tapatalk
Post by: airyimbin on Mon, 30 September 2019, 00:43:18
Sent from my SM-N960U using Tapatalk
Post by: victorpre on Mon, 30 September 2019, 02:35:07
Sent from my Pixel 2 XL using Tapatalk
Post by: bob808 on Tue, 01 October 2019, 00:18:36
Post by: ViciousVerbivore on Tue, 01 October 2019, 03:21:53
I just got confirmation from kbdfans.. they dont do GB anymore.. the methode for this is FCFS..
Group Buy have many uncertainty that could disappoint buyer or GB participant such as color being different from render, shiping time getting delayed and many other stuff that is unpredictable.
We want to may our buyer happy and satisfied when they recive this case. So we think FCFS is best.. we will make a number of case and put it up on sale.
As someone who has been patiently waiting for this board to go into GB, this is not great news; I don't really look forward to mashing F5 and filling in forms frantically in the hope of buying something.
FCFS may be better in terms of WYSIWYG, but that's poor justification for something that's still bought bought online, and without any prior experience of the product. I'm sure there will be more people who would be disappointed that they didn't get in on the buy rather than those who didn't get what they were expecting to (GBs always come with that caveat anyway!). And, with FCFS, there is the matter of inflated aftermarket prices that come with limiting supply, and those that buy with the express aim of flipping their purchase rather than using it. In any case, the trend in this community to move to FCFS and limited GB at a time when it's exploding is a bit worrying.
For the Maja (which looks great, btw!) I wish that you would explore the possibility of collaborating with someone other than KBDfans that would be willing to operate on a traditional GB model (even if it's with limited colour options, etc). Alternatively, you could, maybe, get commitments from buyers over a short period (a few minutes or hours, for example), and then have the manufacturing and dispatch happen in multiple batches so everyone who is interested can get hold of a unit, while ensuring KBDfans aren't overwhelmed by the QC and shipping?
Post by: hnwi on Tue, 01 October 2019, 06:23:42
(https://i.ibb.co/5MmzcjR/Capture1.png) (https://ibb.co/smnD31V)
[attachimg=1]
I just came late in the Maja IC discussion, and found out Maja has been evolving quickly, and I really dig the Maja mojo! ;)
I'd love to see Maja accomodate one more 1U bottom row key (alt/super/fn) on the right side, as it will also balance out the left/right blocker spacing–as seen in the annotated picture. In addition to that, having a staggered Home/PgDn/PgUp rather than vertically upright alignment could make it look even more organic. Minimal indicator lights on the upper left corner might help increase usability as well.
I'd really love to see Maja come to frution.
Post by: menuhin on Tue, 01 October 2019, 07:48:00
... In addition to that, having a staggered Home/PgDn/PgUp rather than vertically upright alignment could make it look even more organic. Minimal indicator lights on the upper left corner might help increase usability as well...
I think staggering on both sides may make it look more balanced, i.e. top-left 3 keys and top-right 3 keys both staggered inwards.
Post by: Vulcan on Tue, 01 October 2019, 19:15:47
Is that 100 of each color?
Sent from my SM-N960U using Tapatalk
100 in total
Hi, i liked the board a lot. Just wondering if you will consider having a solderable PCB
Sent from my Pixel 2 XL using Tapatalk
We will see later maybe we could provide additional non hot swap PCB. But for the defult bundle, Maja will be sold with Hotswap RGB PCB.
Post by: Vulcan on Tue, 01 October 2019, 19:41:03
Hey, I was wondering what the bottom row layout is (what key sizes - 1.5u, 2u, etc.) and if there will be adjustability in the PCB (I think Alice had a couple layout options). I can't seem to find the key sizes for the bottom row anywhere. Thanks and great work!
Same as answer above, for layout i will provide the key sizes.. the botton row us 1.5,2u, 1.25.
I just got confirmation from kbdfans.. they dont do GB anymore.. the methode for this is FCFS..
Group Buy have many uncertainty that could disappoint buyer or GB participant such as color being different from render, shiping time getting delayed and many other stuff that is unpredictable.
We want to may our buyer happy and satisfied when they recive this case. So we think FCFS is best.. we will make a number of case and put it up on sale.
As someone who has been patiently waiting for this board to go into GB, this is not great news; I don't really look forward to mashing F5 and filling in forms frantically in the hope of buying something.
FCFS may be better in terms of WYSIWYG, but that's poor justification for something that's still bought bought online, and without any prior experience of the product. I'm sure there will be more people who would be disappointed that they didn't get in on the buy rather than those who didn't get what they were expecting to (GBs always come with that caveat anyway!). And, with FCFS, there is the matter of inflated aftermarket prices that come with limiting supply, and those that buy with the express aim of flipping their purchase rather than using it. In any case, the trend in this community to move to FCFS and limited GB at a time when it's exploding is a bit worrying.
For the Maja (which looks great, btw!) I wish that you would explore the possibility of collaborating with someone other than KBDfans that would be willing to operate on a traditional GB model (even if it's with limited colour options, etc). Alternatively, you could, maybe, get commitments from buyers over a short period (a few minutes or hours, for example), and then have the manufacturing and dispatch happen in multiple batches so everyone who is interested can get hold of a unit, while ensuring KBDfans aren't overwhelmed by the QC and shipping?
Thank you very much for your input and your intrest for Maja, i really appriciated it. But unfourtunatly we have beed working with kbdfans since the beginning.. so im not going to leave them.
Maybe I didnt explane this quite well.. but for Maja it is not a limited run keyboard.. after 100 board are sold we will make 100 more and sell it again and repeat.. but between those R1 and R2 there will be time for manufacturing again..so people how got it first will enjoy it first.. and people who didnt get it on the R1 will have to wait 1-3 month until it's finish manufacturing.
Option 1
(https://i.ibb.co/5MmzcjR/Capture1.png) (https://ibb.co/smnD31V)
[attachimg=1]
I just came late in the Maja IC discussion, and found out Maja has been evolving quickly, and I really dig the Maja mojo! ;)
I'd love to see Maja accomodate one more 1U bottom row key (alt/super/fn) on the right side, as it will also balance out the left/right blocker spacing–as seen in the annotated picture. In addition to that, having a staggered Home/PgDn/PgUp rather than vertically upright alignment could make it look even more organic. Minimal indicator lights on the upper left corner might help increase usability as well.
I'd really love to see Maja come to frution.
Hi! I wish you joined us sooner, i really love the 1u idea at the bottom.. we will see about that.. but for the staggerd fungtion key i have to disagree.. those key is what will difference Maja from other ergo keyboard.. and i think it looks cleaner
Post by: hnwi on Wed, 02 October 2019, 02:42:29
I'd say we need not to worry much about how Maja may "look" similar to other boards, because it's not. It is quite unique from the get go by the fact it seamlessly incorporates the nav keys into the ergo layout.
Having even spacing blocker by adding one more 1U (or 1.25U) on right bottom row adds that venerable WKL elegance to it.
It's quite tempting to add additional function keys or macro keys to the left side, but I'd say that we should restrain from it as it will ruin the whole ergo aesthetics in its simplest form yet also complete. It may also add additional cost to the production.
I hope Maja could be the best ergo board that assimilates best ideas from Alice, WKL, TKL and HHKB, and yet still unique in its own way.
Lastly, for the sake of Majapahit spirit ;D.... please refrain from using the modified Majapahit logo that looks like Shuriken :eek:
Having a simple pvd brass octagonal star Majapahit logo on the back is more classy (think Fusion60, Singa, Polaris).
Cheers! :thumb:
[attach=1]
Post by: Surefoot on Wed, 02 October 2019, 03:49:45
Post by: Rafa_n on Wed, 02 October 2019, 05:59:03
Post by: Poesjuh on Wed, 02 October 2019, 10:25:53
In for an ISO plate version.Iso enter isn’t possible on this. Enter can’t be done.
Sent from my iPhone using Tapatalk
Post by: airyimbin on Wed, 02 October 2019, 10:45:54
I can see where you're aiming at in terms of aesthetics "cleanliness" by keeping the function keys on the right side of the board vertically upright. It can also maintain a balanced look as long as it has vertically aligned light indicators on the left side (num/scrl/caps light).Honestly, you are late to the discussion. We talked on all these points and layout options and Vulcan decided on the popular consensus. I think the current design is great including the logo and layout.
I'd say we need not to worry much about how Maja may "look" similar to other boards, because it's not. It is quite unique from the get go by the fact it seamlessly incorporates the nav keys into the ergo layout.
Having even spacing blocker by adding one more 1U (or 1.25U) on right bottom row adds that venerable WKL elegance to it.
It's quite tempting to add additional function keys or macro keys to the left side, but I'd say that we should restrain from it as it will ruin the whole ergo aesthetics in its simplest form yet also complete. It may also add additional cost to the production.
I hope Maja could be the best ergo board that assimilates best ideas from Alice, WKL, TKL and HHKB, and yet still unique in its own way.
Lastly, for the sake of Majapahit spirit ;D.... please refrain from using the modified Majapahit logo that looks like Shuriken :eek:
Having a simple pvd brass octagonal star Majapahit logo on the back is more classy (think Fusion60, Singa, Polaris).
Cheers! :thumb:
(Attachment Link)
Sent from my SM-N960U using Tapatalk
Post by: Vulcan on Wed, 02 October 2019, 18:48:37
Sent from my SM-G610F using Tapatalk
Post by: dededecline on Wed, 02 October 2019, 18:49:58
Hi, maybe i forgot to mention. Thick plate have been change to 1.5mm brass plate and The reason is you - "hoobastank"
Sent from my SM-G610F using Tapatalk
I like this change!
Any timeline for when these will become available on KBDFans?
Post by: Vulcan on Wed, 02 October 2019, 18:51:41
Sent from my SM-G610F using Tapatalk
Post by: asianfork on Wed, 02 October 2019, 20:50:52
Post by: dannyny on Wed, 02 October 2019, 21:55:02
Post by: NotYeMK on Thu, 03 October 2019, 03:14:18
(https://i.kym-cdn.com/photos/images/newsfeed/001/437/748/bfd.jpg)
Post by: Vulcan on Fri, 04 October 2019, 17:34:52
Hi, maybe i forgot to mention. Thick plate have been change to 1.5mm brass plate and The reason is you - "hoobastank"
Sent from my SM-G610F using Tapatalk
I like this change!
Any timeline for when these will become available on KBDFans?
any idea of when those 100 units will be available to purchase?
Is there a sale date?
i dont have the exact time, but it's my prediction is around desember/january
Post by: darrenph1 on Sat, 05 October 2019, 12:58:41
Post by: NoxNoxNox on Sat, 05 October 2019, 13:10:24
Post by: elmo on Sat, 05 October 2019, 15:43:04
With only 100 being made this is going to be next to impossible to get and end up being like the Alice and re-sold for $$$$. Any chance to take it somewhere else so it could be a GB or more made?
Maybe you should read the thread a bit more carefully in the future...
Maybe I didnt explane this quite well.. but for Maja it is not a limited run keyboard.. after 100 board are sold we will make 100 more and sell it again and repeat.. but between those R1 and R2 there will be time for manufacturing again..so people how got it first will enjoy it first.. and people who didnt get it on the R1 will have to wait 1-3 month until it's finish manufacturing.
Post by: darrenph1 on Sat, 05 October 2019, 15:49:11
With only 100 being made this is going to be next to impossible to get and end up being like the Alice and re-sold for $$$$. Any chance to take it somewhere else so it could be a GB or more made?
Maybe you should read the thread a bit more carefully in the future...Maybe I didnt explane this quite well.. but for Maja it is not a limited run keyboard.. after 100 board are sold we will make 100 more and sell it again and repeat.. but between those R1 and R2 there will be time for manufacturing again..so people how got it first will enjoy it first.. and people who didnt get it on the R1 will have to wait 1-3 month until it's finish manufacturing.
Nice!
Sent from my iPhone using Tapatalk
Post by: Vulcan on Tue, 08 October 2019, 19:08:31
It's not going to be a professional render like thesiscamper or janglad, I'm still learning, but I'll try my best!
Post by: Yahhms on Tue, 08 October 2019, 19:24:18
Post by: vheissu on Tue, 08 October 2019, 21:19:51
Post by: dexie on Wed, 09 October 2019, 00:17:28
Post by: Jubileus on Wed, 09 October 2019, 01:40:45
Post by: swordfishgirl on Wed, 09 October 2019, 07:06:03
Post by: asianfork on Wed, 09 October 2019, 07:19:06
Do you guys want to see GMK render on Maja? If yes what keyset?GMK Cafe, Dots, penumbra solarized
It's not going to be a professional render like thesiscamper or janglad, I'm still learning, but I'll try my best!
Post by: Steezus on Wed, 09 October 2019, 08:57:18
Honestly, I'd like to see a more basic keycap set to keep the price down.
There is no keycap set offered with this. Vulcan is just asking for keycap recommendations for his renders.
Post by: swordfishgirl on Wed, 09 October 2019, 09:33:01
Post by: heyitsconan on Tue, 15 October 2019, 13:46:15
Post by: Gh0sty on Tue, 15 October 2019, 18:16:34
Post by: Vulcan on Wed, 16 October 2019, 02:52:03
Sent from my SM-G610F using Tapatalk
Post by: rjchatfield on Wed, 16 October 2019, 06:01:02
Sent from my iPad using Tapatalk
Post by: MKBGeek on Wed, 16 October 2019, 09:55:04
Post by: Dissitesuxba11s on Wed, 16 October 2019, 10:00:13
Post by: blatantmp4 on Wed, 16 October 2019, 16:17:30
Post by: Vigrith on Wed, 16 October 2019, 16:52:31
i dont have the exact time, but it's my prediction is around desember/january
Fantastic news. I'm always happy to see people planning so far ahead, market's super saturated right now and being willing to schedule it much further is great for both yourself as the runner as well as for us, the customers.
Good job!
Post by: astronavy on Wed, 16 October 2019, 21:43:02
Post by: Poesjuh on Thu, 17 October 2019, 04:27:29
i dont have the exact time, but it's my prediction is around desember/january
Fantastic news. I'm always happy to see people planning so far ahead, market's super saturated right now and being willing to schedule it much further is great for both yourself as the runner as well as for us, the customers.
Good job!
There are plenty of arguments to make to postpone it to late January / February though. December is, due to obvious reasons, a month where people usually don't have spare money laying around. Same for early January.
Post by: MdotMaxson on Fri, 18 October 2019, 15:38:39
Post by: Vulcan on Wed, 23 October 2019, 21:45:41
Sent from my SM-G610F using Tapatalk
Post by: mrkantz on Wed, 23 October 2019, 22:16:43
Sent from my Pixel 4 XL using Tapatalk
Post by: Dissitesuxba11s on Thu, 24 October 2019, 07:43:47
Post by: ppnp253 on Thu, 24 October 2019, 13:56:55
Post by: p_blaze on Thu, 31 October 2019, 22:13:06
Post by: arninja21 on Fri, 01 November 2019, 04:48:45
Post by: onlinegamer0 on Mon, 04 November 2019, 23:33:29
Post by: chriswade on Fri, 08 November 2019, 21:36:15
Post by: roguesystem087 on Fri, 08 November 2019, 22:42:50
Post by: nicolaidavies on Tue, 12 November 2019, 00:26:32
Post by: mathewC on Tue, 12 November 2019, 15:50:38
Post by: Weaselpc on Tue, 12 November 2019, 20:11:41
Post by: 64B1T on Tue, 12 November 2019, 20:45:29
Post by: Vulcan on Thu, 14 November 2019, 16:21:19
ETA yet?I was targeting desember, but because the proto production takes longer than what i expected I think the ETA is around February.
Sent from my SM-G610F using Tapatalk
Post by: Vulcan on Thu, 14 November 2019, 16:21:34
Will the PCB support QMK?Yes will support
Sent from my SM-G610F using Tapatalk
Post by: Vulcan on Thu, 14 November 2019, 16:24:42
So i see there will be multiple rounds for this board, will this board stop selling at a certain point or will it just sell as long as it is succesful? i really love the look of it and would love to have one. is there also any word on the estimated pricing?We havent decided yet.. but mostly this will stop selling at certain point
Sent from my SM-G610F using Tapatalk
Post by: Vulcan on Thu, 14 November 2019, 16:28:49
Beautiful board. Any word on pricing for it?Pricing will be updated until the proto is finish and approved..
Right now the first proto is already finish but I am remaking it because of some problem
Here ia the proto picture.. please note that the hole on the brass is just for proto.. the end product will have Majapahit engraving(https://uploads.tapatalk-cdn.com/20191114/cce3edabf9da3e1f29f47bff85f927f4.jpg)
Sent from my SM-G610F using Tapatalk
Post by: mathewC on Fri, 15 November 2019, 00:23:02
This board looks absolutely gorgeous! I hope this will be available for a long time. It should be, its a very special and stand out design which could definitely fill a big gap in the market. I wish you the best of luck. I will be keeping my eye open for the product. Do you have any estimation of for how many rounds you will be doing of this?So i see there will be multiple rounds for this board, will this board stop selling at a certain point or will it just sell as long as it is succesful? i really love the look of it and would love to have one. is there also any word on the estimated pricing?We havent decided yet.. but mostly this will stop selling at certain point
Sent from my SM-G610F using Tapatalk
Verzonden vanaf mijn iPhone met Tapatalk
Post by: Fiction on Fri, 15 November 2019, 00:38:47
cheers.
Post by: mathewC on Sun, 17 November 2019, 05:49:20
Verzonden vanaf mijn iPhone met Tapatalk
Post by: mathewC on Sat, 23 November 2019, 14:35:39
Also how is the weight finished? Just brushed or mirror polish? What about the finish of the case? In the pictures it looks kind of shiny
Verzonden vanaf mijn iPhone met Tapatalk
Post by: endler3117 on Sat, 23 November 2019, 18:37:26
Post by: SpeakingSilence on Sat, 23 November 2019, 23:39:07
Post by: Fiction on Wed, 27 November 2019, 22:46:01
Post by: Fadhlanrh on Thu, 28 November 2019, 08:22:41
Post by: mathewC on Fri, 29 November 2019, 12:57:00
Post by: elmo on Fri, 29 November 2019, 12:57:53
is this a full kit? if so what stabilizers are used?no full kit. it's just the case and pcb.
Sent from my ONEPLUS A6013 using Tapatalk
Post by: Cap10Keys on Sun, 01 December 2019, 12:18:35
Post by: YMwoo on Sun, 01 December 2019, 16:11:55
I have 2 questions though (i'm sorry if it's been discussed before):
- since you already have the prototype, can you post a photo comparing it with any 60/65 board and TKL? Curious about the dimension
- i'm quite new with this layout, will the ergo layout feels weird to game? i do game a bit, casual though
Post by: Cap10Keys on Mon, 02 December 2019, 00:59:01
Post by: xchangmanx on Mon, 02 December 2019, 13:51:16
can we have an option to have the weight a multi color or heat treated for that colorful look? if that makes sense lol
Heat Treated +1
Post by: airyimbin on Mon, 02 December 2019, 13:59:03
very interested in this!I game on an Alice clone which has a similar layout and I find it perfectly fine.
I have 2 questions though (i'm sorry if it's been discussed before):
- since you already have the prototype, can you post a photo comparing it with any 60/65 board and TKL? Curious about the dimension
- i'm quite new with this layout, will the ergo layout feels weird to game? i do game a bit, casual though
Never noticed anything out of the ordinary or any mistypes.
Sent from my SM-N960U using Tapatalk
Post by: mathewC on Mon, 02 December 2019, 15:11:48
Would imagine WASD needs to get some readjustment time doesnt it? Do you think a normal keyboard would be better if were talking about gaming?very interested in this!I game on an Alice clone which has a similar layout and I find it perfectly fine.
I have 2 questions though (i'm sorry if it's been discussed before):
- since you already have the prototype, can you post a photo comparing it with any 60/65 board and TKL? Curious about the dimension
- i'm quite new with this layout, will the ergo layout feels weird to game? i do game a bit, casual though
Never noticed anything out of the ordinary or any mistypes.
Sent from my SM-N960U using Tapatalk
Verzonden vanaf mijn iPhone met Tapatalk
Post by: airyimbin on Mon, 02 December 2019, 15:48:20
Sent from my SM-N960U using Tapatalk
Post by: YMwoo on Mon, 02 December 2019, 18:02:29
Personally, didn't need readjustment time since it's all relatively in the same place. But I see your point. Your mileage might vary but it shouldn't be a high learning curve for gaming.
Sent from my SM-N960U using Tapatalk
thanks for letting me know! I suspected it but just wondering since never tried this layout before myself.
As long as it's fine then it's good :thumb:
Post by: chriswade on Wed, 04 December 2019, 15:59:20
Post by: ctxgoldsamy on Wed, 04 December 2019, 16:56:32
Post by: Oneilljstn on Thu, 05 December 2019, 21:36:50
Post by: Loveyuri on Mon, 09 December 2019, 02:07:22
Post by: Vulcan on Tue, 17 December 2019, 21:07:59
Sent from my SM-G610F using Tapatalk
Post by: Loveyuri on Tue, 17 December 2019, 21:32:34
Also, what are the colors that will be offered?
Post by: Vulcan on Tue, 17 December 2019, 21:35:06
Are you satisfied with the prototype?I feel like the gap from case and keycaps is too wide.. what do you think? Other than that it looks great.
Also, what are the colors that will be offered?
Sent from my SM-G610F using Tapatalk
Post by: Dissitesuxba11s on Tue, 17 December 2019, 21:39:56
Post by: Vulcan on Tue, 17 December 2019, 21:45:54
Keycap spacing is a bit too wide. Is that standard spacing?Standard...maybe it looks like that because of angle or lighting.. I have to get hands on the proto to judge.. right now it's still in manufacture
Sent from my SM-G610F using Tapatalk
Post by: mathewC on Wed, 18 December 2019, 00:19:18
Verzonden vanaf mijn iPhone met Tapatalk
Post by: PikaJoyce on Wed, 18 December 2019, 00:28:08
It looks a tad bit wide but I think it's better to judge it when you have it in hand. Having some tighter tolerances around the edge would be a nicer touch if that was really case but the varying angles of the photos make it hard to tell if the gap is actually as wide as it seems in some of the photos. But otherwise, I agree it looks really good!Keycap spacing is a bit too wide. Is that standard spacing?Standard...maybe it looks like that because of angle or lighting.. I have to get hands on the proto to judge.. right now it's still in manufacture
Sent from my SM-G610F using Tapatalk
Post by: CommunistPie on Wed, 18 December 2019, 02:18:57
Post by: DaneOne on Wed, 18 December 2019, 17:41:13
Post by: p_blaze on Thu, 19 December 2019, 18:33:58
Post by: Agpatel on Fri, 20 December 2019, 18:26:34
Post by: DJ Clicks on Sat, 21 December 2019, 01:11:38
Post by: johnnysstash on Sun, 29 December 2019, 21:04:44
i am very interested assuming the bottom row was just the wrong layout. seeing as the plate looks as it would be the right layout? the shift over to the left one column would kill it for me. watching closely
Post by: Vulcan on Mon, 30 December 2019, 01:48:09
filled form
i am very interested assuming the bottom row was just the wrong layout. seeing as the plate looks as it would be the right layout? the shift over to the left one column would kill it for me. watching closely
which one is the wrong layout? could you point it for me?
Post by: Zeelobby on Wed, 01 January 2020, 14:44:24
Post by: jdc122 on Thu, 02 January 2020, 10:53:28
Post by: HungHingDaiLo on Thu, 02 January 2020, 23:31:21
Post by: DJ Clicks on Fri, 03 January 2020, 06:25:14
Post by: deathjester on Sat, 04 January 2020, 10:32:24
Post by: Poesjuh on Sat, 04 January 2020, 12:27:19
Sent from my iPhone using Tapatalk
Post by: deathjester on Mon, 06 January 2020, 03:55:24
Alice lay-outs never are iso compatible, not a single one.
Sent from my iPhone using Tapatalk
That's kind of my point really, it would be nice to have one.
Post by: yourfavorite on Thu, 09 January 2020, 21:51:06
Post by: LemonsGivesLife on Fri, 10 January 2020, 02:19:19
Looking forward to having this as my first custom keyboard! :D
Post by: elmo on Fri, 10 January 2020, 02:22:21
I beg of you. Please add a Windows Key option. It is a necessity for most of us Mac users.Windows key in the usual posiyion is not possible on the Alice layout. But since the board is most likely going to run qmk you could just remap the windows key to one of the alt keys or to the split spacebar.
Post by: yourfavorite on Tue, 14 January 2020, 15:42:39
I beg of you. Please add a Windows Key option. It is a necessity for most of us Mac users.Windows key in the usual posiyion is not possible on the Alice layout. But since the board is most likely going to run qmk you could just remap the windows key to one of the alt keys or to the split spacebar.
Could absolutely add a key on the left side. 1u at least. Moving an important key for the sake of a keyboard just isn't worth it. Not worth developing habits that force me to rethink how I use a keyboard whenever I'm not on this specific keyboard.
Post by: yourfavorite on Tue, 14 January 2020, 15:52:02
Did a quick hack to show ~1.25u WK on left side and a ~2u key on the right side. Don't see any reason this couldn't be an option from a tech/physical perspective. Where it becomes an issue is cost of PCB and top case I guess. Personally I'd pay a premium for this feature as losing the WK is not really an option for me (Mac users)
(https://i.imgur.com/nzzkev9.png)
Post by: airyimbin on Tue, 14 January 2020, 16:32:55
Sorry for the quick hack on your beautiful work @communistpieI'm a Mac user you can just reprogram one of the keys to Command. It's perfectly fine as it is.
Did a quick hack to show ~1.25u WK on left side and a ~2u key on the right side. Don't see any reason this couldn't be an option from a tech/physical perspective. Where it becomes an issue is cost of PCB and top case I guess. Personally I'd pay a premium for this feature as losing the WK is not really an option for me (Mac users)Show Image(https://i.imgur.com/nzzkev9.png)
Sent from my SM-N960U using Tapatalk
Post by: Jignoni on Tue, 14 January 2020, 16:39:33
Sorry for the quick hack on your beautiful work @communistpieI have been looking for a alice-ish board and this is my dream layout.
Did a quick hack to show ~1.25u WK on left side and a ~2u key on the right side. Don't see any reason this couldn't be an option from a tech/physical perspective. Where it becomes an issue is cost of PCB and top case I guess. Personally I'd pay a premium for this feature as losing the WK is not really an option for me (Mac users)Show Image(https://i.imgur.com/nzzkev9.png)
Post by: Zeelobby on Tue, 14 January 2020, 16:41:50
Sent from my Pixel 3 XL using Tapatalk
Post by: Zeelobby on Tue, 14 January 2020, 16:43:27
Sent from my Pixel 3 XL using Tapatalk
Post by: Jignoni on Tue, 14 January 2020, 16:54:21
And I have to second the reprogramming the keys. Comes up in every wkl or hhkb thread. So easy to do for all these boards which support qmk, and often times people put it in an even more convenient or comfortable position then it's default.Think it might be less comfortable for wasd games but you could shift one coloum to the right.
Sent from my Pixel 3 XL using Tapatalk
About the reprogramming, it still leaves you with less keys and for someone that uses especially the left mods alot it's enough to turn you off a board
Post by: Zeelobby on Tue, 14 January 2020, 16:57:22
And I have to second the reprogramming the keys. Comes up in every wkl or hhkb thread. So easy to do for all these boards which support qmk, and often times people put it in an even more convenient or comfortable position then it's default.Think it might be less comfortable for wasd games but you could shift one coloum to the right.
Sent from my Pixel 3 XL using Tapatalk
About the reprogramming, it still leaves you with less keys and for someone that uses especially the left mods alot it's enough to turn you off a board
True. Just requires retraining though. I just used to be in the same boat, but after years of alternating between them I guess I've just become an ambi-moder. It's definitely not as rough as when I trained to use an ortholinear, haha.
Sent from my Pixel 3 XL using Tapatalk
Post by: Myteethfeelweird on Tue, 14 January 2020, 17:10:12
Post by: yourfavorite on Tue, 14 January 2020, 17:11:24
People who don't have the same preferences as me: Just remap the windows key to a different key on the keyboard. Its not a problem for me personally so it definitely will be fine for you because my preferences are the same as everyone else.
Me: ...
Post by: Zeelobby on Tue, 14 January 2020, 17:15:11
Me: I don't want to remap the windows key elsewhere on the keyboardYou: Redesign your vision, and the legacy of Alice, so I don't have to learn something new.
People who don't have the same preferences as me: Just remap the windows key to a different key on the keyboard. Its not a problem for me personally so it definitely will be fine for you because my preferences are the same as everyone else.
Me: ...
A lot of people clearly like the design as is. You could always start an IC for a design that includes it and see how it goes? Clearly there's some interest.
Sent from my Pixel 3 XL using Tapatalk
Post by: yourfavorite on Tue, 14 January 2020, 17:20:18
Me: I don't want to remap the windows key elsewhere on the keyboardYou: Redesign your vision, and the legacy of Alice, so I don't have to learn something new.
People who don't have the same preferences as me: Just remap the windows key to a different key on the keyboard. Its not a problem for me personally so it definitely will be fine for you because my preferences are the same as everyone else.
Me: ...
A lot of people clearly like the design as is. You could always start an IC for a design that includes it and see how it goes? Clearly there's some interest.
Sent from my Pixel 3 XL using Tapatalk
The issue I have is that the request I made is possible to do with different top case options and would not affect those that prefer WKL. Many keyboards offer this. I'm well aware it is an unlikely request but every time I see people asking for a WK to be added to a layout (reasonable request) loads of people that don't care about WK chime in telling them to remap it. I believe everyone in this scene is well aware of the fact that QMK allows remapping of keys like this but we're making the request despite that because its important to us.
Additionally I didn't make the request because I don't think there's enough interest. Its a preference request and that's all. Not sure why it needs to get shot down by loads of people that aren't the creator ¯\_(ツ)_/¯
Post by: Jignoni on Tue, 14 January 2020, 17:28:18
And I have to second the reprogramming the keys. Comes up in every wkl or hhkb thread. So easy to do for all these boards which support qmk, and often times people put it in an even more convenient or comfortable position then it's default.Think it might be less comfortable for wasd games but you could shift one coloum to the right.
Sent from my Pixel 3 XL using Tapatalk
About the reprogramming, it still leaves you with less keys and for someone that uses especially the left mods alot it's enough to turn you off a board
True. Just requires retraining though. I just used to be in the same boat, but after years of alternating between them I guess I've just become an ambi-moder. It's definitely not as rough as when I trained to use an ortholinear, haha.
Sent from my Pixel 3 XL using Tapatalk
Then we are polar opposites otho just made sense to me and having all the mods does too :)
Post by: Zeelobby on Tue, 14 January 2020, 18:01:49
The issue I have is that the request I made is possible to do with different top case options and would not affect those that prefer WKL. Many keyboards offer this. I'm well aware it is an unlikely request but every time I see people asking for a WK to be added to a layout (reasonable request) loads of people that don't care about WK chime in telling them to remap it. I believe everyone in this scene is well aware of the fact that QMK allows remapping of keys like this but we're making the request despite that because its important to us.
Additionally I didn't make the request because I don't think there's enough interest. Its a preference request and that's all. Not sure why it needs to get shot down by loads of people that aren't the creator ¯\_(ツ)_/¯
See I think you just took it the wrong way. We weren't shooting you down. We were simply just offering a solution. One that we've experienced to work and one we've seen others learn and do OK with in order to enjoy a board they really like otherwise. I'm sorry if this is repeated to you often, I'm sure that must be frustrating. But it's a usual response just cause it's worked for many people. So sorry about that.
Sent from my Pixel 3 XL using Tapatalk
Post by: Zeelobby on Tue, 14 January 2020, 18:02:46
And I have to second the reprogramming the keys. Comes up in every wkl or hhkb thread. So easy to do for all these boards which support qmk, and often times people put it in an even more convenient or comfortable position then it's default.Think it might be less comfortable for wasd games but you could shift one coloum to the right.
Sent from my Pixel 3 XL using Tapatalk
About the reprogramming, it still leaves you with less keys and for someone that uses especially the left mods alot it's enough to turn you off a board
True. Just requires retraining though. I just used to be in the same boat, but after years of alternating between them I guess I've just become an ambi-moder. It's definitely not as rough as when I trained to use an ortholinear, haha.
Sent from my Pixel 3 XL using Tapatalk
Then we are polar opposites otho just made sense to me and having all the mods does too :)
Ortho definitely makes sense to me now. It's the retraining my fingers to hit the right number keys that took time. Haha.
Sent from my Pixel 3 XL using Tapatalk
Post by: yourfavorite on Tue, 14 January 2020, 18:15:21
The issue I have is that the request I made is possible to do with different top case options and would not affect those that prefer WKL. Many keyboards offer this. I'm well aware it is an unlikely request but every time I see people asking for a WK to be added to a layout (reasonable request) loads of people that don't care about WK chime in telling them to remap it. I believe everyone in this scene is well aware of the fact that QMK allows remapping of keys like this but we're making the request despite that because its important to us.
Additionally I didn't make the request because I don't think there's enough interest. Its a preference request and that's all. Not sure why it needs to get shot down by loads of people that aren't the creator ¯\_(ツ)_/¯
See I think you just took it the wrong way. We weren't shooting you down. We were simply just offering a solution. One that we've experienced to work and one we've seen others learn and do OK with in order to enjoy a board they really like otherwise. I'm sorry if this is repeated to you often, I'm sure that must be frustrating. But it's a usual response just cause it's worked for many people. So sorry about that.
Sent from my Pixel 3 XL using Tapatalk
It's all good man. It's frustrating for sure, but I get it. The scene is growing quickly and with lots of new people entering there are definitely people that don't know about it. I wrote up a longer response just now and deleted it because I realized we're getting a little far off the path for this thread. :D
Post by: Zeelobby on Tue, 14 January 2020, 18:31:24
It's all good man. It's frustrating for sure, but I get it. The scene is growing quickly and with lots of new people entering there are definitely people that don't know about it. I wrote up a longer response just now and deleted it because I realized we're getting a little far off the path for this thread. :D
Haha. All good :D
The one cool thing about more people getting involved is you may one day see an Alice with those keys specifically for those who waited. It might just take a while if every Alice board released sells out instantly in it's current form factor. Less incentive to diversify yet, unlike 60 keyboards where now you have to to stand out.
Sent from my Pixel 3 XL using Tapatalk
Post by: mathewC on Wed, 15 January 2020, 01:33:59
Can anyone comment on gaming or typing on an alice-like layout. Those staggered keys just look like they'd be a nightmare. Even for the wasd. Would love to get some feedback from someone whose used them for a while. I mean look wise it's the bomb-diggity.I asked this question in this thread before and someone said they have an alice type board that they use for gaming and dont really have a problem with gaming
Sent from my Pixel 3 XL using Tapatalk
Verzonden vanaf mijn iPhone met Tapatalk
Post by: Zeelobby on Wed, 15 January 2020, 06:23:54
Thanks! I mean I know they're the latest rage recently, and they photograph extremely well. But the layout isn't ergonomically an improvement over basic boards or ergo boards. It's definitely aesthetics. Great looking aesthetics, but it's good to hear still functional.Can anyone comment on gaming or typing on an alice-like layout. Those staggered keys just look like they'd be a nightmare. Even for the wasd. Would love to get some feedback from someone whose used them for a while. I mean look wise it's the bomb-diggity.I asked this question in this thread before and someone said they have an alice type board that they use for gaming and dont really have a problem with gaming
Sent from my Pixel 3 XL using Tapatalk
Verzonden vanaf mijn iPhone met Tapatalk
Sent from my Pixel 3 XL using Tapatalk
Post by: Vulcan on Wed, 15 January 2020, 19:03:53
case production will start after Chinese new year
(https://i.ibb.co/0Gmn2hP/4-a52edafa-91fb-42fa-a035-d4be11b8a288-1800x1800.jpg) (https://ibb.co/ZMGfXWy)
(https://i.ibb.co/1Rqs2s4/5-184b25a4-577e-40fd-b2c0-eb4d58d7fb61-1800x1800.jpg) (https://ibb.co/Zc8HTHb)
(https://i.ibb.co/wYYwRyN/010e6f3c3f693d7c280db3918fc9e8bb.jpg) (https://ibb.co/yVVYX0n)
Post by: Zeelobby on Wed, 15 January 2020, 19:09:45
Sent from my Pixel 3 XL using Tapatalk
Post by: Zeelobby on Wed, 15 January 2020, 19:10:44
Sent from my Pixel 3 XL using Tapatalk
Post by: mathewC on Thu, 16 January 2020, 00:49:56
Verzonden vanaf mijn iPhone met Tapatalk
Post by: elmo on Thu, 16 January 2020, 01:05:11
Since the color polling form is gone I guess the choice has been made on what colors will be available.
Btw. great proto pics! :)
Post by: Poesjuh on Thu, 16 January 2020, 03:50:01
Any chance the tolerances are changing? Looking at the top down picture the gaps around the caps seem to be fairly large.
Post by: Zeelobby on Thu, 16 January 2020, 06:58:37
Lol, the placement of N-? and FN on that board is dumb :P Lots of typo's incoming.
Any chance the tolerances are changing? Looking at the top down picture the gaps around the caps seem to be fairly large.
It's programmable. I'd probably switch that Fn to the other side after the V, and move the B over. On a normal board the B is closer to the right index anyway. Typing on this thing is always going to be an adjustment though.
Post by: Poesjuh on Thu, 16 January 2020, 07:24:42
Post by: Vulcan on Thu, 16 January 2020, 07:30:09
Lol, the placement of N-? and FN on that board is dumb :P Lots of typo's incoming.
Any chance the tolerances are changing? Looking at the top down picture the gaps around the caps seem to be fairly large.
Lol! Yea i notice that also.. kbdfans is not familiar with this layout... the right one is like the render
Post by: Zeelobby on Thu, 16 January 2020, 07:53:48
On a normal keyboard the B is smack down in the middle. What I mean is that nm.,,? are 1u to the right normally. Kbd just put the caps on incorrect. We all use the extra B spot differently (most people would probably make it an extra B) but keep the bottom right alpha’s where they should be :)
True. I guess I feel It's odd that people place double B's. I know few touch typists that alternate fingers for B. Most usually have a favorite. But maybe my limited pool doesn't reflect reality.
Sent from my Pixel 3 XL using Tapatalk
Post by: tuxkey on Thu, 16 January 2020, 11:28:19
Someone on discord directed me to this page.. i was looking on the kbdfans "New arrival" section and read the comment from kbd that this was coming next month.
My first impression seeing it. was it looks like my 65% boards , but with a nice curve.. so like my tada68, or DZ65RGB or NK65.
Having read one page of the comments (going to read all of it later).. The layout now looks strange.. could you please explain @vulcan
Take for example the letter j on one of my 65% the right bottom corner key is the M. And the right bottom key of the H is N.
So in short it looks like the bottom row should move one key to the right.. Am i missing something please correct me.. Oh wait i see whats going on.. the fn key can move to the left then it all looks fine.. missed that one .. but diffrent render shows this..
Sorry for the long write up..
To finish the first thing that i also noticed was the missing key on the right , i somehow expected 4 keys instead of 3..
But if i'm being 100% honest i would not mind an extra key to the left of the arrow cluster.. that would be a nice key for fn.
Reason why i would put it there. was that i can use it to add a second function to the arrow cluster like page down/up and extra function to that top right key. i like to put tilde ~ and carrot ` there... if i put the fn key where the n is now where it belongs to have correct layout it would be to far to use one handed.. hope you understand what i mean..if not just ask i will be keeping my eyes on this board. but perhaps i'm too late..
Post by: tuxkey on Thu, 16 January 2020, 11:30:37
really love to hear you thought.. thanks..
Post by: Poesjuh on Thu, 16 January 2020, 16:59:37
Sent from my iPhone using Tapatalk
Post by: tuxkey on Fri, 17 January 2020, 04:26:43
KBDfans put the caps on incorrect.
Sent from my iPhone using Tapatalk
Yah i came to the same conclusion .. needed to look twice to figure it out.. on first glance i did not notice it.
the fn cap would go to where the N is now.. that's my whole point it would then be to far to use on the right cluster..
therefor my suggestion for a fn key next to the right Control keycap.
this would give you the same spacer on the right as on the left .. for those symmetry geeks among us..
put that key in the same angle as the Control key.. and making it an fn 1u or 1.5u key will add even more to the symmetry.
Almost making a mirror copy of the left to the right.. :cool: :thumb:
Post by: mathewC on Thu, 23 January 2020, 12:16:57
Verzonden vanaf mijn iPhone met Tapatalk
Post by: dumhevae on Thu, 23 January 2020, 14:45:14
Post by: ctxgoldsamy on Thu, 23 January 2020, 14:52:04
Sent from my iPhone using Tapatalk
Post by: Magas on Fri, 24 January 2020, 13:28:38
Post by: vurtomatic on Mon, 27 January 2020, 09:04:48
Post by: MdotMaxson on Mon, 27 January 2020, 22:30:19
Post by: airyimbin on Mon, 03 February 2020, 20:53:48
Is there any update on estimate for when this will be purchasable ? I think kbd fans is vendor?
Im just going to assume that everything that is being produced in China is going to be delayed until after the holidays.
Post by: mattling9 on Fri, 07 February 2020, 06:15:39
$200-$250, $250-$300, $300-$350, $350-$400, $400+?
Also i am wondering if there has been any progress made on colour selection?
Post by: Ruffles on Fri, 07 February 2020, 09:45:43
What are the confirmed 3 colors?
Post by: Zeelobby on Mon, 10 February 2020, 06:49:12
Post by: Donkoko on Sun, 16 February 2020, 08:59:35
Sorry for newb question but I am wondering, will the keybindings be programmable/customizable and how much options would we have. I use mac at work so it would be great for me to be able to set my command key to one of the alt/shift keys on the bottom row.
Post by: elmo on Sun, 16 February 2020, 09:01:43
Really looking forward to this. Layout looks great.
Sorry for newb question but I am wondering, will the keybindings be programmable/customizable and how much options would we have. I use mac at work so it would be great for me to be able to set my command key to one of the alt/shift keys on the bottom row.
The PCB will most likely run on QMK firmware, meaning it will be fully programmable. Basically meaning unlimited "options".
Post by: mattling9 on Mon, 17 February 2020, 04:33:25
I would love to get the top in Black and bottom in Red.
Will this be possible?
Post by: Donkoko on Mon, 17 February 2020, 05:42:57
Really looking forward to this. Layout looks great.
Sorry for newb question but I am wondering, will the keybindings be programmable/customizable and how much options would we have. I use mac at work so it would be great for me to be able to set my command key to one of the alt/shift keys on the bottom row.
The PCB will most likely run on QMK firmware, meaning it will be fully programmable. Basically meaning unlimited "options".
Thanks a bunch for the info. I will look into QMK.
Post by: tyskstil on Wed, 19 February 2020, 08:49:15
Post by: cijanzen on Wed, 19 February 2020, 08:50:23
What do I do to get in on this?
Basically wait. We’re waiting on kbdfans at this point I believe but corona virus is slowing things down.
Post by: mathewC on Thu, 20 February 2020, 09:37:21
Post by: mattling9 on Wed, 26 February 2020, 05:35:30
Post by: mathewC on Thu, 05 March 2020, 09:07:20
Post by: Movingforward on Sun, 22 March 2020, 16:45:27
Post by: MdotMaxson on Sat, 11 April 2020, 07:21:25
Post by: airyimbin on Sat, 11 April 2020, 10:29:21
If there ever comes a day this is purchaseable. I will do just that. Purchaseable itI too second that notion
Sent from my SM-N960U using Tapatalk
Post by: Kavik on Sat, 11 April 2020, 23:55:08
If there ever comes a day this is purchaseable. I will do just that. Purchaseable itI too second that notion
Sent from my SM-N960U using Tapatalk
Same. Once I get this, Primus 75%, RAMA U80-A, and F77, I'm going to call it quits on keyboards, at least for the foreseeable future. This one is a must-have.
Post by: konstantin on Sun, 12 April 2020, 08:46:05
Same. Once I get this, Primus 75%, RAMA U80-A, and F77, I'm going to call it quits on keyboards, at least for the foreseeable future. This one is a must-have.
I see you're a man of culture as well.
Post by: mathewC on Tue, 21 April 2020, 04:08:09
Post by: hcoopos on Thu, 30 April 2020, 15:07:22
Post by: war40ck on Sun, 03 May 2020, 01:24:23
Post by: Jaltr on Sun, 03 May 2020, 10:29:28
Any updates? Just made an account to keep in touch with this thread.You can sign up on kbdfans.com to get on the wishlist.
Sent from my SM-J415G using Tapatalk
Post by: inkz999 on Sun, 03 May 2020, 10:47:52
Sent from my EML-L29 using Tapatalk
Post by: jollyeskimo on Sun, 03 May 2020, 12:05:37
Emailed kbdfans and their response was pretty clear.
Post by: ninjacore on Sun, 03 May 2020, 12:06:15
Post by: Vulcan on Sun, 03 May 2020, 17:55:11
Sorry for a loong time without updating, not because i don't want to update but there is just nothing to update, all there time was just waiting, waiting and waiting. today i saw kbdfans website and there's MAJA coming soon and from now i think it's time to intensify communication with kbdfans. I will keep you guys updated every few days.
This is i what i know so far base on my last communication with kbdfans.
1. Color Option : Last time i communicate with kbdfans it's going to be Black, Grey, Rose gold/ silver.
2. Solder PCB : I have already suggested a soldered PCB with layout option, but i guess Kbdfans is more interested on Hot swap RGB. But I really hope there is still a possibility of future change.
3. Middle foam : Last time they say they didn't make it. i don't know if they didn't make it just for the proto or they don't want to make it foe the final product. when i ask they didn't reply back. I will ask again.
4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder version of PCB.
Thats all the update I have so far. I will contact KBDfans tomorrow and keep you guys updated.
Thank you,
Post by: airyimbin on Sun, 03 May 2020, 17:57:33
Sent from my SM-N960U using Tapatalk
Post by: Vulcan on Sun, 03 May 2020, 18:05:04
Thanks for the update! I think the most important question is when the sale will happen.
Sent from my SM-N960U using Tapatalk
Ok, I will ask them out, thank you! :thumb:
Post by: YMwoo on Sun, 03 May 2020, 22:56:23
Hello Guys,
Sorry for a loong time without updating, not because i don't want to update but there is just nothing to update, all there time was just waiting, waiting and waiting. today i saw kbdfans website and there's MAJA coming soon and from now i think it's time to intensify communication with kbdfans. I will keep you guys updated every few days.
This is i what i know so far base on my last communication with kbdfans.
1. Color Option : Last time i communicate with kbdfans it's going to be Black, Grey, Rose gold/ silver.
2. Solder PCB : I have already suggested a soldered PCB with layout option, but i guess Kbdfans is more interested on Hot swap RGB. But I really hope there is still a possibility of future change.
3. Middle foam : Last time they say they didn't make it. i don't know if they didn't make it just for the proto or they don't want to make it foe the final product. when i ask they didn't reply back. I will ask again.
4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder version of PCB.
Thats all the update I have so far. I will contact KBDfans tomorrow and keep you guys updated.
Thank you,
Finally some update! FCFS is kinda stressful because you need to get in time unless the amount is high enough. I really hope there will be R2 later though since I don't think I can join in the R1 for now but still very interested in this keyboard.
Some questions/input:
- Hoping for dark blue/navy color for later
- Middle foam would be amazing
- Any final pricing too?
- Any plan to port into VIA?
- What would be the plate options (and color)?
Post by: elmo on Mon, 04 May 2020, 00:13:41
Hello Guys,no dark green and no soldered pcb
Sorry for a loong time without updating, not because i don't want to update but there is just nothing to update, all there time was just waiting, waiting and waiting. today i saw kbdfans website and there's MAJA coming soon and from now i think it's time to intensify communication with kbdfans. I will keep you guys updated every few days.
This is i what i know so far base on my last communication with kbdfans.
1. Color Option : Last time i communicate with kbdfans it's going to be Black, Grey, Rose gold/ silver.
2. Solder PCB : I have already suggested a soldered PCB with layout option, but i guess Kbdfans is more interested on Hot swap RGB. But I really hope there is still a possibility of future change.
3. Middle foam : Last time they say they didn't make it. i don't know if they didn't make it just for the proto or they don't want to make it foe the final product. when i ask they didn't reply back. I will ask again.
4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder version of PCB.
Thats all the update I have so far. I will contact KBDfans tomorrow and keep you guys updated.
Thank you,
too bad. was hoping to see that color.
that's gonna be a pass for me then :(
Post by: Tree_ on Mon, 04 May 2020, 01:14:46
4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder version of PCB.
I haven't checked in on this thread for quite awhile, but FCFS with a limit of 100 is a big yikes from me after thinking I could just wait for the board to come along as an in-stock item on KBDFans.
What's worse is the way this is worded, "If there is still demand" - Does that mean further rounds after the initial 100 aren't a sure thing?
Post by: Executorg on Mon, 04 May 2020, 04:35:48
Hoping for dark blue/navy color for later+1, Navy is what I really hoping for.
Post by: beekey on Mon, 04 May 2020, 04:44:36
Post by: mathewC on Mon, 04 May 2020, 05:48:14
Lets say there will be a solderable pcb for R2, could you make it available for purchase separately for people who do get into R1?
Verzonden vanaf mijn iPhone met Tapatalk
Post by: Vulcan on Mon, 04 May 2020, 08:52:26
Post by: Vulcan on Mon, 04 May 2020, 09:11:14
Hello Guys,
Sorry for a loong time without updating, not because i don't want to update but there is just nothing to update, all there time was just waiting, waiting and waiting. today i saw kbdfans website and there's MAJA coming soon and from now i think it's time to intensify communication with kbdfans. I will keep you guys updated every few days.
This is i what i know so far base on my last communication with kbdfans.
1. Color Option : Last time i communicate with kbdfans it's going to be Black, Grey, Rose gold/ silver.
2. Solder PCB : I have already suggested a soldered PCB with layout option, but i guess Kbdfans is more interested on Hot swap RGB. But I really hope there is still a possibility of future change.
3. Middle foam : Last time they say they didn't make it. i don't know if they didn't make it just for the proto or they don't want to make it foe the final product. when i ask they didn't reply back. I will ask again.
4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder version of PCB.
Thats all the update I have so far. I will contact KBDfans tomorrow and keep you guys updated.
Thank you,
Finally some update! FCFS is kinda stressful because you need to get in time unless the amount is high enough. I really hope there will be R2 later though since I don't think I can join in the R1 for now but still very interested in this keyboard.
Some questions/input:
- Hoping for dark blue/navy color for later
- Middle foam would be amazing
- Any final pricing too?
- Any plan to port into VIA?
- What would be the plate options (and color)?
1. I'm also hoping in the future we could make more case color, but for now I think the standard color is the only option
2. I know, that's why I put it on the design, I hope Kbdfans didn't take them out.
3. I cant answer this. only kbdfnas knows.
4.maybe in the future
5. for now only brass, but I'm planing to also provide aluminum with many color, we will see.
Hello Guys,no dark green and no soldered pcb
Sorry for a loong time without updating, not because i don't want to update but there is just nothing to update, all there time was just waiting, waiting and waiting. today i saw kbdfans website and there's MAJA coming soon and from now i think it's time to intensify communication with kbdfans. I will keep you guys updated every few days.
This is i what i know so far base on my last communication with kbdfans.
1. Color Option : Last time i communicate with kbdfans it's going to be Black, Grey, Rose gold/ silver.
2. Solder PCB : I have already suggested a soldered PCB with layout option, but i guess Kbdfans is more interested on Hot swap RGB. But I really hope there is still a possibility of future change.
3. Middle foam : Last time they say they didn't make it. i don't know if they didn't make it just for the proto or they don't want to make it foe the final product. when i ask they didn't reply back. I will ask again.
4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder version of PCB.
Thats all the update I have so far. I will contact KBDfans tomorrow and keep you guys updated.
Thank you,
too bad. was hoping to see that color.
that's gonna be a pass for me then :(
I'm really sorry elmo :( I also wish we could make more color variety. but for r1 think standard color is the only option. I can only choose 3 color. for solder PCB I also wish we could do that. but Kbdfans wanted hot swap for r1.. but I'm planning to make solder version in the future.
4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder versions of PCB.
I haven't checked in on this thread for quite a while, but FCFS with a limit of 100 is a big yikes from me after thinking I could just wait for the board to come along as an in-stock item on KBDFans.
What's worse is the way this is worded, "If there is still demand" - Does that mean further rounds after the initial 100 aren't a sure thing?
What I understand from my conversation with Kbdfans is they will make more when it's out of stock.. but will stop making when they think the demand is getting low.
The original post lacks a bit of information. Is there an overview of which layouts are supported? I see it is a hotswap PCB. Is split backspace an option?
for R1 kbdfans wanted to do hotswap so only 1 layout like the render is supported, but personally I really wanted a soldered version of pcb with multiple layout option. I'm planing to make that in the future, I'm willing to spend some of my profit from this project to make that happen.
Could you ask them how much time will be between R1 and R2 if they see there are many people asking for it? Is there a possibility of other plate options?
Lets say there will be a solderable pcb for R2, could you make it available for purchase separately for people who do get into R1?
Verzonden vanaf mijn iPhone met Tapatalk
same as other kbdfans product, around 2-3 month .for plate option I will suggest them to make aluminum version.
Post by: mathewC on Mon, 04 May 2020, 09:14:55
Thanks for the response. Also, on the site I believe the pricing states $300. Also, I would love a polycarb or FR4 plate!Hello Guys,
Sorry for a loong time without updating, not because i don't want to update but there is just nothing to update, all there time was just waiting, waiting and waiting. today i saw kbdfans website and there's MAJA coming soon and from now i think it's time to intensify communication with kbdfans. I will keep you guys updated every few days.
This is i what i know so far base on my last communication with kbdfans.
1. Color Option : Last time i communicate with kbdfans it's going to be Black, Grey, Rose gold/ silver.
2. Solder PCB : I have already suggested a soldered PCB with layout option, but i guess Kbdfans is more interested on Hot swap RGB. But I really hope there is still a possibility of future change.
3. Middle foam : Last time they say they didn't make it. i don't know if they didn't make it just for the proto or they don't want to make it foe the final product. when i ask they didn't reply back. I will ask again.
4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder version of PCB.
Thats all the update I have so far. I will contact KBDfans tomorrow and keep you guys updated.
Thank you,
Finally some update! FCFS is kinda stressful because you need to get in time unless the amount is high enough. I really hope there will be R2 later though since I don't think I can join in the R1 for now but still very interested in this keyboard.
Some questions/input:
- Hoping for dark blue/navy color for later
- Middle foam would be amazing
- Any final pricing too?
- Any plan to port into VIA?
- What would be the plate options (and color)?
1. I'm also hoping in the future we could make more case color, but for now I think the standard color is the only option
2. I know, that's why I put it on the design, I hope Kbdfans didn't take them out.
3. I cant answer this. only kbdfnas knows.
4.maybe in the future
5. for now only brass, but I'm planing to also provide aluminum with many color, we will see.Hello Guys,no dark green and no soldered pcb
Sorry for a loong time without updating, not because i don't want to update but there is just nothing to update, all there time was just waiting, waiting and waiting. today i saw kbdfans website and there's MAJA coming soon and from now i think it's time to intensify communication with kbdfans. I will keep you guys updated every few days.
This is i what i know so far base on my last communication with kbdfans.
1. Color Option : Last time i communicate with kbdfans it's going to be Black, Grey, Rose gold/ silver.
2. Solder PCB : I have already suggested a soldered PCB with layout option, but i guess Kbdfans is more interested on Hot swap RGB. But I really hope there is still a possibility of future change.
3. Middle foam : Last time they say they didn't make it. i don't know if they didn't make it just for the proto or they don't want to make it foe the final product. when i ask they didn't reply back. I will ask again.
4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder version of PCB.
Thats all the update I have so far. I will contact KBDfans tomorrow and keep you guys updated.
Thank you,
too bad. was hoping to see that color.
that's gonna be a pass for me then :(
I'm really sorry elmo :( I also wish we could make more color variety. but for r1 think standard color is the only option. I can only choose 3 color. for solder PCB I also wish we could do that. but Kbdfans wanted hot swap for r1.. but I'm planning to make solder version in the future.4. FCFS :Maja will be sale as a FCFS, not a GB.. Kbdfans stop doing GB because there is too much uncertainty. For The first batch of Maja we will make 100 case. if there is still demand we will make a second batch with different color and i really hope we can do multiple layout and solder versions of PCB.
I haven't checked in on this thread for quite a while, but FCFS with a limit of 100 is a big yikes from me after thinking I could just wait for the board to come along as an in-stock item on KBDFans.
What's worse is the way this is worded, "If there is still demand" - Does that mean further rounds after the initial 100 aren't a sure thing?
What I understand from my conversation with Kbdfans is they will make more when it's out of stock.. but will stop making when they think the demand is getting low.The original post lacks a bit of information. Is there an overview of which layouts are supported? I see it is a hotswap PCB. Is split backspace an option?
for R1 kbdfans wanted to do hotswap so only 1 layout like the render is supported, but personally I really wanted a soldered version of pcb with multiple layout option. I'm planing to make that in the future, I'm willing to spend some of my profit from this project to make that happen.Could you ask them how much time will be between R1 and R2 if they see there are many people asking for it? Is there a possibility of other plate options?
Lets say there will be a solderable pcb for R2, could you make it available for purchase separately for people who do get into R1?
Verzonden vanaf mijn iPhone met Tapatalk
same as other kbdfans product, around 2-3 month .for plate option I will suggest them to make aluminum version.
Verzonden vanaf mijn iPhone met Tapatalk
Post by: YMwoo on Mon, 04 May 2020, 19:00:00
Finally some update! FCFS is kinda stressful because you need to get in time unless the amount is high enough. I really hope there will be R2 later though since I don't think I can join in the R1 for now but still very interested in this keyboard.
Some questions/input:
- Hoping for dark blue/navy color for later
- Middle foam would be amazing
- Any final pricing too?
- Any plan to port into VIA?
- What would be the plate options (and color)?
1. I'm also hoping in the future we could make more case color, but for now I think the standard color is the only option
2. I know, that's why I put it on the design, I hope Kbdfans didn't take them out.
3. I cant answer this. only kbdfnas knows.
4.maybe in the future
5. for now only brass, but I'm planing to also provide aluminum with many color, we will see.
even though i appreciate kbdfans for their capability and helping you, i wish you have more freedom as the designer.
that being said, even though i don't think i can join in R1 just yet hoping that i can hop in the future run, and hopefully with more color options too!
anyway good luck and great job!
Post by: ViciousVerbivore on Tue, 05 May 2020, 00:09:36
Now, then, what's happening with that Primatech/Void Lisa GB?
Post by: TimeDoctor on Tue, 05 May 2020, 02:23:14
Post by: 2003987 on Tue, 05 May 2020, 02:50:39
Post by: Vulcan on Tue, 05 May 2020, 09:11:55
Time windowed sales aren’t fair for supply limited products, the only fair method is a lottery. The speculators and flippers are always better at making it into a short time window than everyone else.
Confirmation of the FCFS format is disappointing to say the least, especially for a number as low as 100 (there are more than 600 people on the waiting list now, according to the KBDfans Majapahit product page, suggesting that there is definitely more demand than there will be supply). Couldn't there be some sort of compromise between a full-blown GB and an FCFS sale? Perhaps a 1 minute window for everyone who's interested to make a purchase, and then the orders get fulfilled in batches of whatever size KBDfans feels comfortable fulfilling? I can't help but feel that this is just going to end up playing into the hands of those looking to flip these on mechmarket, especially if KBDfans and/or Vulcan can't confirm beforehand that there will be future runs and at reasonable intervals (and who's to say there won't be repeat buyers from previous rounds there?).
Now, then, what's happening with that Primatech/Void Lisa GB?
Time windowed sales aren’t fair for supply limited products, the only fair method is a lottery. The speculators and flippers are always better at making it into a short time window than everyone else.
Guys I think i didnt explain quite well.. this is not a exclusive limited product, you cant really flip this just like other kbdfans board, first batch kbdfnas will make 100 case with 3 color dan RGB PCB, when first batch sold out they will make second batch with other color and maybe solder pcb version.. they will keep doing this until the demand is low.
Post by: Vulcan on Tue, 05 May 2020, 09:16:27
Any clue when will the sale start?
This month
Post by: rockydbull on Tue, 05 May 2020, 10:23:25
[/quote]
Guys I think i didnt explain quite well.. this is not a exclusive limited product, you cant really flip this just like other kbdfans board, first batch kbdfnas will make 100 case with 3 color dan RGB PCB, when first batch sold out they will make second batch with other color and maybe solder pcb version.. they will keep doing this until the demand is low.
[/quote]
Oh this will absolutely flip for more than purchase price. 100 kits will go fast. Just look at how the tofu v2 sold out quick and was flipped for more.
Post by: econeuler on Tue, 05 May 2020, 14:18:49
Post by: Sylvestyeo on Wed, 06 May 2020, 00:22:58
Post by: ViciousVerbivore on Wed, 06 May 2020, 09:12:30
Quote
Guys I think i didnt explain quite well.. this is not a exclusive limited product, you cant really flip this just like other kbdfans board, first batch kbdfnas will make 100 case with 3 color dan RGB PCB, when first batch sold out they will make second batch with other color and maybe solder pcb version.. they will keep doing this until the demand is low.
I've thought about this a bit more, and it's not really the flipping that is the issue - that's almost a given when trading in things where demand exceeds supply - the margins will vary depending on the difference between supply and demand volumes and the commodity and how well it will hold its value over time among other things, but it will almost always be a seller's market.
What I can't agree with is "this is not a exclusive limited product", as there is no way for everyone who wants one (assuming supply is equal to or greater than demand) to be assured of a purchase if each batch is a FCFS sale. For example, (assuming that for all batches except the last one, supply is less than or equal to demand) those who lack the internet infrastructure, or reflexes or even scripting skills to quickly checkout their carts are at a disadvantage, and they may be unable to make the purchase of the product in a desired color, or at a convenient time, etc. This may then lead to them having to pay a higher rate in the aftermarket, or to arrange a swap if they managed to snag a configuration not to their liking, etc. but that's really down to the individual and whether or not they are patient enough to wait for the next round of sales - but there is no guarantee that they will succeed there either.
I understand that what is being planned will mean that people could just wait for the next sale every time they miss out on the purchase, but, that's difficult to plan for, without knowing whether whatever demand remains will be enough for KBDfans to make another run, and the intervals at which those runs will happen. There is also no way to prevent repeat buyers from previous rounds putting pressure on the supply. And, let's face that we're in a hobby where there's always something new coming along all the time, and there may not be enough interest (not the same as demand) in something to sustain more than a handful of runs - that's a disservice to those who were very keen, but missed out, but also to the designer, especially if it's a unique, well-thought out product like this one.
While I am unaware of exactly why KBDfans no longer wants to run traditional GBs, I can speculate that it's very likely down to QC/packaging/fulfillment/logistics issues - unless it's something very specific to the way KBDfans operates with their suppliers. If it were up to me, I would still push to go about the sale in the compromise manner that I suggested in my previous post - open order forms for one minute for the sale of some reasonably large number of units, say 500, and then fulfill those on a FCFS basis (effectively the order in which they were checked out) in batches of whatever number works for KBDfans; repeat if necessary, working off the number of waiting list sign-ups or order overflows. KBDfans then needs to communicate to the buyers - still using the same schedule they would have had for five runs of 100 boards each - when they can expect to receive their board based on their position in the list of buyers - while a pipe dream, I would love to hear what others think of this format.
Anyway, sorry for the rambling post, but I'm just trying to offer my perspective as a prospective buyer (or not, depending on my FCFS skills and luck) of a very attractive and unique board from a designer who has been very proactive and taken on board (ha!) a lot of feedback from the community during the IC. It just seems that with FCFS (and the lack of some options that many users seem to be keen on), both parties aren't going to be able to see the full potential of those interactions. I'll still look forward to snagging a Majapahit, and wish you good luck with the sale, Vulcan!
Post by: rockydbull on Wed, 06 May 2020, 21:54:58
QuoteGuys I think i didnt explain quite well.. this is not a exclusive limited product, you cant really flip this just like other kbdfans board, first batch kbdfnas will make 100 case with 3 color dan RGB PCB, when first batch sold out they will make second batch with other color and maybe solder pcb version.. they will keep doing this until the demand is low.
I've thought about this a bit more, and it's not really the flipping that is the issue - that's almost a given when trading in things where demand exceeds supply - the margins will vary depending on the difference between supply and demand volumes and the commodity and how well it will hold its value over time among other things, but it will almost always be a seller's market.
What I can't agree with is "this is not a exclusive limited product", as there is no way for everyone who wants one (assuming supply is equal to or greater than demand) to be assured of a purchase if each batch is a FCFS sale. For example, (assuming that for all batches except the last one, supply is less than or equal to demand) those who lack the internet infrastructure, or reflexes or even scripting skills to quickly checkout their carts are at a disadvantage, and they may be unable to make the purchase of the product in a desired color, or at a convenient time, etc. This may then lead to them having to pay a higher rate in the aftermarket, or to arrange a swap if they managed to snag a configuration not to their liking, etc. but that's really down to the individual and whether or not they are patient enough to wait for the next round of sales - but there is no guarantee that they will succeed there either.
I understand that what is being planned will mean that people could just wait for the next sale every time they miss out on the purchase, but, that's difficult to plan for, without knowing whether whatever demand remains will be enough for KBDfans to make another run, and the intervals at which those runs will happen. There is also no way to prevent repeat buyers from previous rounds putting pressure on the supply. And, let's face that we're in a hobby where there's always something new coming along all the time, and there may not be enough interest (not the same as demand) in something to sustain more than a handful of runs - that's a disservice to those who were very keen, but missed out, but also to the designer, especially if it's a unique, well-thought out product like this one.
While I am unaware of exactly why KBDfans no longer wants to run traditional GBs, I can speculate that it's very likely down to QC/packaging/fulfillment/logistics issues - unless it's something very specific to the way KBDfans operates with their suppliers. If it were up to me, I would still push to go about the sale in the compromise manner that I suggested in my previous post - open order forms for one minute for the sale of some reasonably large number of units, say 500, and then fulfill those on a FCFS basis (effectively the order in which they were checked out) in batches of whatever number works for KBDfans; repeat if necessary, working off the number of waiting list sign-ups or order overflows. KBDfans then needs to communicate to the buyers - still using the same schedule they would have had for five runs of 100 boards each - when they can expect to receive their board based on their position in the list of buyers - while a pipe dream, I would love to hear what others think of this format.
Anyway, sorry for the rambling post, but I'm just trying to offer my perspective as a prospective buyer (or not, depending on my FCFS skills and luck) of a very attractive and unique board from a designer who has been very proactive and taken on board (ha!) a lot of feedback from the community during the IC. It just seems that with FCFS (and the lack of some options that many users seem to be keen on), both parties aren't going to be able to see the full potential of those interactions. I'll still look forward to snagging a Majapahit, and wish you good luck with the sale, Vulcan!
I think you really nailed it. I see people carrying the water for these new formats by saying the window was open for a whole hour or 2 hours. Ok cool, but some people can't jump on their computer and purchase a keyboard 24/7. This is especially problematic with kbdfans because they list stuff while most of USA is asleep. This may be changing in the future though because they are about to launch the 65% at in est morning.
Post by: m1gs on Wed, 06 May 2020, 22:15:17
Post by: gorbachev on Thu, 07 May 2020, 00:56:17
Post by: hcoopos on Thu, 07 May 2020, 01:03:34
Split backspace going to be supported?
+1, although I doubt it
Post by: m1gs on Thu, 07 May 2020, 11:22:00
MAJA：The last sample is in production, and 100 sets will be produced in March
but here in geekhack it says:
timeline
- Finish the design in August
- Submit to factory for proto in September
I'm confused on the updates, what is its current status?
Post by: elmo on Thu, 07 May 2020, 11:33:36
It says on discord:
MAJA：The last sample is in production, and 100 sets will be produced in March
but here in geekhack it says:
timeline
- Finish the design in August
- Submit to factory for proto in September
I'm confused on the updates, what is its current status?
Current status is that the board is listed on kbdfans now and according to them it will be available later this month as an in-stock item
Post by: nostr on Thu, 07 May 2020, 13:17:48
Post by: YMwoo on Thu, 07 May 2020, 21:33:01
It says on discord:
MAJA：The last sample is in production, and 100 sets will be produced in March
but here in geekhack it says:
timeline
- Finish the design in August
- Submit to factory for proto in September
I'm confused on the updates, what is its current status?
The OP isn't updated, the IC was posted early last year and the August and September there were for 2019 initially.
Post by: krey on Mon, 11 May 2020, 00:28:51
Post by: MdotMaxson on Wed, 13 May 2020, 02:51:25
Post by: knitandcode on Wed, 13 May 2020, 11:11:02
Is it only available in black? Just going off what I see on kbdfans website?
OP mentioned that the colors are going to likely be: Black, Grey, Rose gold/ silver.
Post by: vurtomatic on Wed, 13 May 2020, 12:51:31
Post by: donutfactory on Thu, 14 May 2020, 10:39:54
Wondering if there are people who use Alice-style keyboards with a Mac? The bottom row looks spread out, how would you type Shift+Option+Cmd+V?I do. I move the modifiers.
Caps > Control, lower-left > Alt, left of space > Cmd.
Post by: kosoy on Thu, 14 May 2020, 10:49:35
Post by: vurtomatic on Thu, 14 May 2020, 13:30:31
Wondering if there are people who use Alice-style keyboards with a Mac? The bottom row looks spread out, how would you type Shift+Option+Cmd+V?I do. I move the modifiers.
Caps > Control, lower-left > Alt, left of space > Cmd.
Ah nice, do you have a picture of your layout you can share?
Post by: FunBox on Sun, 24 May 2020, 19:24:59
Sent from my SM-N975U1 using Tapatalk
Post by: elmo on Mon, 25 May 2020, 06:37:15
What type of mounting style will this use?
Sent from my SM-N975U1 using Tapatalk
It's top-mount :)
Post by: bs on Mon, 25 May 2020, 18:34:16
Post by: TalksToChalk on Mon, 25 May 2020, 19:35:38
Sent from my iPhone using Tapatalk
Post by: kanki0213 on Mon, 25 May 2020, 20:20:26
Sent from my iPhone using Tapatalk
Post by: vi0till on Tue, 26 May 2020, 01:16:42
Sent from my VOG-L29 using Tapatalk
Post by: woyaodapian on Wed, 27 May 2020, 08:46:58
Post by: $W4GK!NG on Wed, 27 May 2020, 09:29:35
Post by: BuddhaBen on Wed, 27 May 2020, 10:54:15
100 units for sale at beginning of June, then they will be doing a UNLIMITED group buy.
Post by: shenan97 on Wed, 27 May 2020, 11:03:01
KBD just posted a update on this on their discord. GOOD NEWS!Does that mean that they have units to be shipped out immediately?
100 units for sale at beginning of June, then they will be doing a UNLIMITED group buy.
Post by: BuddhaBen on Wed, 27 May 2020, 11:06:59
Post by: NcXDevil on Wed, 27 May 2020, 11:08:45
KBD just posted a update on this on their discord. GOOD NEWS!Does that mean that they have units to be shipped out immediately?
100 units for sale at beginning of June, then they will be doing a UNLIMITED group buy.
It's a group buy, so no
Post by: vi0till on Wed, 27 May 2020, 11:09:55
KBD just posted a update on this on their discord. GOOD NEWS!I wish the creator can discuss with kbdfans to offer solder pcb and other type of plate during the unlimited gb. BTW, what is the typing angle for this keyboard?
100 units for sale at beginning of June, then they will be doing a UNLIMITED group buy.
Sent from my VOG-L29 using Tapatalk
Post by: m1gs on Wed, 27 May 2020, 12:39:14
KBD just posted a update on this on their discord. GOOD NEWS!Would like to clarify I’m a bit confused.. so after the 100 units are officially sold, group buy will start at once? Or it’ll take a couple of months to start?
100 units for sale at beginning of June, then they will be doing a UNLIMITED group buy.
Sent from my iPhone using Tapatalk
Post by: FunBox on Wed, 27 May 2020, 13:10:23
I am also wondering this. I might have to delay before buying it right away but If I have to wait months of unspecified time I might have to move some things around so I can get the initial dropKBD just posted a update on this on their discord. GOOD NEWS!Would like to clarify I’m a bit confused.. so after the 100 units are officially sold, group buy will start at once? Or it’ll take a couple of months to start?
100 units for sale at beginning of June, then they will be doing a UNLIMITED group buy.
Sent from my iPhone using Tapatalk
Sent from my SM-N975U1 using Tapatalk
Post by: BuddhaBen on Wed, 27 May 2020, 13:41:04
No real details.
Post by: m1gs on Thu, 28 May 2020, 09:14:48
Post by: Domantas on Thu, 28 May 2020, 11:34:29
Couple suggestions:
Split Backspace support
Moving the right 3-key cluster a bit more right to accommodate a forth key below that fits in the space next to the up arrow key
Beautiful board, I will be stalking its progress ;D
Bad suggestion. I don't like either split backspace, either why you really need 4 key?
Post by: Vulcan on Thu, 28 May 2020, 22:41:33
KBD just posted a update on this on their discord. GOOD NEWS!Would like to clarify I’m a bit confused.. so after the 100 units are officially sold, group buy will start at once? Or it’ll take a couple of months to start?
100 units for sale at beginning of June, then they will be doing a UNLIMITED group buy.
Sent from my iPhone using Tapatalk
Not at once, will take 1 month before GB
Post by: woyaodapian on Thu, 28 May 2020, 23:10:08
Post by: Vulcan on Thu, 28 May 2020, 23:14:15
and what would be the offered color options now?
Plain standar color, Black, Grey, Silver
Post by: vi0till on Thu, 28 May 2020, 23:15:20
Any chance to offer more colors during unlimited gb? and solder pcb option?and what would be the offered color options now?
Plain standar color, Black, Grey, Silver
Sent from my VOG-L29 using Tapatalk
Post by: TalksToChalk on Thu, 28 May 2020, 23:15:56
Sent from my iPhone using Tapatalk
Post by: ramnes on Fri, 29 May 2020, 00:45:39
Post by: theside123 on Fri, 29 May 2020, 01:03:22
Post by: Vulcan on Fri, 29 May 2020, 03:39:06
Any chance to offer more colors during unlimited gb? and solder pcb option?and what would be the offered color options now?
Plain standar color, Black, Grey, Silver
Sent from my VOG-L29 using Tapatalk
yes solder PCB will be offers in GB. for color we will discus with factory
Post by: woyaodapian on Fri, 29 May 2020, 04:15:19
Hope more allowance can be achieved in the upcoming group buy.
Post by: theside123 on Fri, 29 May 2020, 21:22:03
Post by: theside123 on Fri, 29 May 2020, 21:25:12
Post by: FunBox on Fri, 29 May 2020, 21:28:00
Sent from my SM-N975U1 using Tapatalk
Post by: aib on Sat, 30 May 2020, 13:31:46
Post by: superdang on Sat, 30 May 2020, 14:40:46
Post by: chickenballs on Sun, 31 May 2020, 10:11:45
(I might have gotten the 100 per batch wrong so don't hesitate to correct me)
Sent from my Pixel 3 using Tapatalk
Post by: FunBox on Sun, 31 May 2020, 10:22:30
Sent from my SM-N975U1 using Tapatalk
Post by: its_just_Joe on Wed, 03 June 2020, 10:07:00
Post by: Cosmic Outlaw on Wed, 03 June 2020, 14:32:29
Post by: TalksToChalk on Wed, 03 June 2020, 14:35:33
Sent from my iPhone using Tapatalk
Post by: TibtibThePrincess on Wed, 03 June 2020, 14:45:47
Hi, I'm fairly new to MKs. I'm interested in this board and waiting for the launch but one question: how would I select the proper keycap set for this keyboard while paying attention to r1, r2 etc and the weird keycap widths. Any tips how I would go on about this? I mean, usually there's a sheet of each keycap slot size in U´s right?
You can try to estimate how long a keycap is (all alphas are 1U and you can use these to extrapolate) or you can ask in KBDFans discord if you need confirmation on a few of them.
Sent from my iPhone using Tapatalk
Any full sized base kit
like this one sold by kbdfans and used in the prototypes (http://"https://kbdfans.com/collections/keycaps/products/epbt-venice-doubleshot-abs-keycaps-set") should cover the whole board
Post by: pleasega on Sun, 07 June 2020, 22:44:35
Post by: m1gs on Wed, 17 June 2020, 00:27:32
Post by: inkz999 on Wed, 17 June 2020, 00:49:23
https://shimo.im/docs/yVkpW9KHtXJWGyrj/read
Sent from my EML-L29 using Tapatalk
Post by: m1gs on Wed, 17 June 2020, 00:55:34
This is from yesterday post on KBDfans product announcment discord channel.
https://shimo.im/docs/yVkpW9KHtXJWGyrj/read
Sent from my EML-L29 using Tapatalk
thanks!
Post by: ViciousVerbivore on Wed, 17 June 2020, 01:40:35
This is from yesterday post on KBDfans product announcment discord channel.
https://shimo.im/docs/yVkpW9KHtXJWGyrj/read
Sent from my EML-L29 using Tapatalk
So, still not an "unlimited group buy" as was previously claimed? :confused:
Post by: m1gs on Wed, 17 June 2020, 01:41:30
This is from yesterday post on KBDfans product announcment discord channel.
https://shimo.im/docs/yVkpW9KHtXJWGyrj/read
Sent from my EML-L29 using Tapatalk
So, still not an "unlimited group buy" as was previously claimed? :confused:
yeah they lied. wew.
Post by: synchromatik on Wed, 17 June 2020, 08:35:43
Quote
PC 200 sets (Polished plate and weight )
Will PC feature a underglow pcb?
Post by: SlamMakanen on Wed, 17 June 2020, 09:19:20
Post by: Taicho on Sat, 20 June 2020, 19:20:47
Post by: thornkin on Sun, 21 June 2020, 02:46:41
Post by: sprigun on Sun, 21 June 2020, 07:34:50
What time on the 25th would this start?
Agree, would be good to know that too
Post by: natfen on Tue, 23 June 2020, 04:36:48
What time on the 25th would this start?
Agree, would be good to know that too
Starts at 10 a.m. EST on June 25th
Taken from the product updates on their discord
Post by: sprigun on Tue, 23 June 2020, 22:56:59
What time on the 25th would this start?
Agree, would be good to know that too
Starts at 10 a.m. EST on June 25th
Taken from the product updates on their discord
Cheers!
Now to decide whether to wait out for next round of Rukia or this!!! ^-^
Post by: stein3 on Wed, 24 June 2020, 00:36:43
Post by: Vulcan on Wed, 24 June 2020, 02:05:07
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
Post by: FunBox on Wed, 24 June 2020, 02:37:59
Hello guys,A delayed product is eventually good. A rushed product is bad forever.
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, there will be no 100 stocked case FCFS sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
I know I speak for most of us when I say we appreciate your attention to detail and that you'd rather have them sent back instead of selling a sub par product.
Looking forward to getting one nevertheless :)
Sent from my SM-N975U1 using Tapatalk
Post by: mathewC on Wed, 24 June 2020, 02:54:09
Verzonden vanaf mijn iPhone met Tapatalk
Post by: ViciousVerbivore on Wed, 24 June 2020, 03:26:24
Hello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
So, how many units will be available tomorrow?
Post by: Vulcan on Wed, 24 June 2020, 04:13:50
Wait so now there will be a soldered pcb option? Will this be for the first run now or still only hotswap for the first run?
Verzonden vanaf mijn iPhone met Tapatalk
Hello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
So, how many units will be available tomorrow?
Tomorrow will be the unlimited Group Buy.
Yes there will be solderd version of the PCB.
No in stock case will be for sale
Post by: vi0till on Wed, 24 June 2020, 04:15:59
For solder version, does not support stepped capslock?Wait so now there will be a soldered pcb option? Will this be for the first run now or still only hotswap for the first run?
Verzonden vanaf mijn iPhone met TapatalkHello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
So, how many units will be available tomorrow?
Tomorrow will be the unlimited Group Buy.
Yes there will be solderd version of the PCB.
No in stock case will be for sale
Sent from my VOG-L29 using Tapatalk
Post by: junwon9710 on Wed, 24 June 2020, 04:16:27
Post by: ViciousVerbivore on Wed, 24 June 2020, 04:44:00
Wait so now there will be a soldered pcb option? Will this be for the first run now or still only hotswap for the first run?
Verzonden vanaf mijn iPhone met TapatalkHello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
So, how many units will be available tomorrow?
Tomorrow will be the unlimited Group Buy.
Yes there will be solderd version of the PCB.
No in stock case will be for sale
Okay, thanks! That's good news. A few posts up, someone had posted a link to a screencap that seemed to show limited numbers for the GB phase as well.
Will we be able to also order additional plates and/or PCBs?
Post by: i luv chuletas on Wed, 24 June 2020, 07:44:01
Wait so now there will be a soldered pcb option? Will this be for the first run now or still only hotswap for the first run?
Verzonden vanaf mijn iPhone met TapatalkHello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
So, how many units will be available tomorrow?
Tomorrow will be the unlimited Group Buy.
Yes there will be solderd version of the PCB.
No in stock case will be for sale
So when will the GB run till? Get paid on Friday, want to see if I'll have a chance to grab one.
Post by: steezkeez on Wed, 24 June 2020, 08:07:05
Post by: tomatohammado on Wed, 24 June 2020, 08:48:46
Hello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
Does the soldered PCB have split backspace support?
Post by: airyimbin on Wed, 24 June 2020, 08:50:09
Yes, look at the layout on the first post.Hello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
Does the soldered PCB have split backspace support?
Sent from my SM-N960U using Tapatalk
Post by: Vulcan on Wed, 24 June 2020, 09:24:26
Will there be an option to add extra PCBs to the order? As of right now, I don’t see the ability to do that on the product page. I would like to purchase both a hotswap and non-hotswap PCB with the board.
Wait so now there will be a soldered pcb option? Will this be for the first run now or still only hotswap for the first run?
Verzonden vanaf mijn iPhone met TapatalkHello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
So, how many units will be available tomorrow?
Tomorrow will be the unlimited Group Buy.
Yes there will be solderd version of the PCB.
No in stock case will be for sale
Okay, thanks! That's good news. A few posts up, someone had posted a link to a screencap that seemed to show limited numbers for the GB phase as well.
Will we be able to also order additional plates and/or PCBs?
Wait so now there will be a soldered pcb option? Will this be for the first run now or still only hotswap for the first run?
Verzonden vanaf mijn iPhone met TapatalkHello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
So, how many units will be available tomorrow?
Tomorrow will be the unlimited Group Buy.
Yes there will be solderd version of the PCB.
No in stock case will be for sale
Okay, thanks! That's good news. A few posts up, someone had posted a link to a screencap that seemed to show limited numbers for the GB phase as well.
Will we be able to also order additional plates and/or PCBs?
Tomorrow we will add option to buy extra PCB and foam
Post by: Vulcan on Wed, 24 June 2020, 09:26:28
Wait so now there will be a soldered pcb option? Will this be for the first run now or still only hotswap for the first run?
Verzonden vanaf mijn iPhone met TapatalkHello guys,
I have good news and bad news.
The good news is, The GB starts tomorrow June 25th at 10.00 am EST. Also, I finally have major updates from Kbdfans. I have posted all of the information with photos and video on the main page of this thread. please check them out.
The bad news is, the 100 stocked case will not be for sale, the reason is that all of the 100 cases have problems with the brass weight, so we need to return it and get it fixed.
So, how many units will be available tomorrow?
Tomorrow will be the unlimited Group Buy.
Yes there will be solderd version of the PCB.
No in stock case will be for sale
So when will the GB run till? Get paid on Friday, want to see if I'll have a chance to grab one.
GB will run until 15th July
Post by: prognostics on Wed, 24 June 2020, 10:18:16
Post by: KurageOuji on Wed, 24 June 2020, 10:50:45
Post by: Vulcan on Wed, 24 June 2020, 10:59:50
Were real life photos of the final colors posted anywhere? I'm not sure how secure I feel going for blue with only renders.
The first post is deep blue color and green.. the video on the first post is also deep blue
Post by: KurageOuji on Wed, 24 June 2020, 11:08:55
Were real life photos of the final colors posted anywhere? I'm not sure how secure I feel going for blue with only renders.
The first post is deep blue color and green.. the video on the first post is also deep blue
Just making sure they were final colors. Did any review units get sent to content creators?
Post by: Nyeezy on Wed, 24 June 2020, 11:14:01
And is it truly unlimited? KBDfans discord says there’s only 200 of each color?
Post by: Mcnos on Wed, 24 June 2020, 11:22:07
Post by: TalksToChalk on Wed, 24 June 2020, 12:03:38
Never mind i see the layouts supported on OP. (It does support split backspace)
Post by: oom on Wed, 24 June 2020, 14:12:57
Also, the shift underneath the enter is 2u?
Post by: Poesjuh on Wed, 24 June 2020, 14:50:32
Don’t mind the hand writing :P
I assume hot-swappable will use one of the left side layouts.
Sent from my iPad using Tapatalk
Post by: TalksToChalk on Wed, 24 June 2020, 15:04:03
Post by: h40 on Wed, 24 June 2020, 15:56:21
Post by: Vulcan on Wed, 24 June 2020, 22:28:38
No E-White it seems. Sad about that, but that Green looks nice and is unique.
I remove e-white because the current factory that we are working with does not support e-white.
Post by: Cosmic Outlaw on Thu, 25 June 2020, 06:12:06
Post by: Vulcan on Thu, 25 June 2020, 07:38:22
Huh, why did the KBD In-Stock and Ready to Buy notification go out when they never were intended to be sold? So group buy starts today then, what's the shipping prognosis for group buy items? What happens to the previously in-stock items?
I have already explain this above. They were intended to be sold but they didnt pass QC.. something is wrong with the brass weight so we had to return it to the factory to get it fixed.
Shipping of the GB item will be announce after the GB ends. Because we can not estimate the lead time before knowing how many quantity needed to be made.
Post by: prognostics on Thu, 25 June 2020, 07:39:17
Can we get confirmation on colors? Particularly interested in green. Is it still Pine Grove (19-5406 TCX)?
Forest green did make it! It is live on KBDfans, not purchasable yet.
Alu Black Alu Deep Blue Alu Dark Green Polycarbonate Alu Grey
EDIT: Ordered the Dark Green! Shipping to the US was pretty cheap.
If you want a solder and hot swap PCB, it is $10 cheaper to order the keyboard with a hot swap PCB and add the solderable. Use ILOVEKBDFANS for $2 off.
So excited to get this keyboard!
Post by: i luv chuletas on Thu, 25 June 2020, 09:19:34
I'll prolly be picking up one of the green units, love me some unique colors and the price point makes it feel like it'd be plain rude to not pick one of these up.
Post by: emerge on Thu, 25 June 2020, 10:11:47
Sent from my Pixel 3a XL using Tapatalk
Post by: sprigun on Thu, 25 June 2020, 10:17:07
Ouch 39 USD to ship to Australia. :-X
Post by: shardikofthebeam on Thu, 25 June 2020, 10:57:32
Post by: prognostics on Thu, 25 June 2020, 11:08:10
Seems weird to me that the PC version is just as expensive as the full ALU body. Is this a normal thing with keyboards that have PC and ALU options for the case?
Yes, scrap rate for PC is much higher than ALU. PC usually costs more.
Post by: shardikofthebeam on Thu, 25 June 2020, 14:10:56
Seems weird to me that the PC version is just as expensive as the full ALU body. Is this a normal thing with keyboards that have PC and ALU options for the case?
Yes, scrap rate for PC is much higher than ALU. PC usually costs more.
Good to know! I had no idea PC costs more than CNC'd aluminum
Post by: TalksToChalk on Thu, 25 June 2020, 15:33:41
30 dollars for shipping is cheap??Can we get confirmation on colors? Particularly interested in green. Is it still Pine Grove (19-5406 TCX)?
Forest green did make it! It is live on KBDfans, not purchasable yet.
Alu Black Alu Deep Blue Alu Dark Green Polycarbonate Alu Grey
EDIT: Ordered the Dark Green! Shipping to the US was pretty cheap.
If you want a solder and hot swap PCB, it is $10 cheaper to order the keyboard with a hot swap PCB and add the solderable. Use ILOVEKBDFANS for $2 off.
So excited to get this keyboard!
Sent from my iPhone using Tapatalk
Post by: Vulcan on Thu, 25 June 2020, 16:35:38
30 dollars for shipping is cheap??Can we get confirmation on colors? Particularly interested in green. Is it still Pine Grove (19-5406 TCX)?
Forest green did make it! It is live on KBDfans, not purchasable yet.
Alu Black Alu Deep Blue Alu Dark Green Polycarbonate Alu Grey
EDIT: Ordered the Dark Green! Shipping to the US was pretty cheap.
If you want a solder and hot swap PCB, it is $10 cheaper to order the keyboard with a hot swap PCB and add the solderable. Use ILOVEKBDFANS for $2 off.
So excited to get this keyboard!
Sent from my iPhone using Tapatalk
It's a 3kg keyboard
Post by: newQuestionMann on Thu, 25 June 2020, 17:34:33
Post by: KingOfMemes on Thu, 25 June 2020, 17:34:52
For a heavy ass keyboard? To the US from China? Dirt cheap30 dollars for shipping is cheap??Can we get confirmation on colors? Particularly interested in green. Is it still Pine Grove (19-5406 TCX)?
Forest green did make it! It is live on KBDfans, not purchasable yet.
Alu Black Alu Deep Blue Alu Dark Green Polycarbonate Alu Grey
EDIT: Ordered the Dark Green! Shipping to the US was pretty cheap.
If you want a solder and hot swap PCB, it is $10 cheaper to order the keyboard with a hot swap PCB and add the solderable. Use ILOVEKBDFANS for $2 off.
So excited to get this keyboard!
Sent from my iPhone using Tapatalk
Post by: Hellenic94 on Thu, 25 June 2020, 17:41:42
What's the weight of the polycarbonate version?
interested to find this out as well
Post by: Tree_ on Thu, 25 June 2020, 17:47:40
30 dollars for shipping is cheap??Can we get confirmation on colors? Particularly interested in green. Is it still Pine Grove (19-5406 TCX)?
Forest green did make it! It is live on KBDfans, not purchasable yet.
Alu Black Alu Deep Blue Alu Dark Green Polycarbonate Alu Grey
EDIT: Ordered the Dark Green! Shipping to the US was pretty cheap.
If you want a solder and hot swap PCB, it is $10 cheaper to order the keyboard with a hot swap PCB and add the solderable. Use ILOVEKBDFANS for $2 off.
So excited to get this keyboard!
Sent from my iPhone using Tapatalk
Not sure why you would think it isn't?
To Australia it's $40USD ($60AUD) when I would have assumed the shipping from China to Australia would be cheaper than to the US. I'm actually surprised at how expensive it is but can't see why folks in the US would think the same thing.
Post by: Katsurio on Thu, 25 June 2020, 20:31:49
I wonder because I was thinking of going with the Polycarb version but only if there are lights to mesmerize my children w/the pretty lights, lol. Never had a PC board so I don't know what to expect. Any input is greatly appreciated.
Also, what keycaps are people planning to put on the green board? I love green have/will have multiple green keycap sets but none of them would go well with the green board -_-
Post by: Vulcan on Thu, 25 June 2020, 20:50:19
Excuse my ignorance, but does the hotswap PCB w/per key RGB light already have the lights in it? I don't need to do anything? Also, how bright will the lights be for the keys, underglow, etc.
I wonder because I was thinking of going with the Polycarb version but only if there are lights to mesmerize my children w/the pretty lights, lol. Never had a PC board so I don't know what to expect. Any input is greatly appreciated.
Also, what keycaps are people planning to put on the green board? I love green have/will have multiple green keycap sets but none of them would go well with the green board -_-
Hello, yes hotswap already has light in it, no need to add anything. the light of the RGB can be seen on the video at the first post of this thread, but the PCB does not support under glow lighting,
for green case I think using GMK camping or GMK wild would be super dope
Post by: h40 on Thu, 25 June 2020, 22:41:52
Hello, yes hotswap already has light in it, no need to add anything. the light of the RGB can be seen on the video at the first post of this thread, but the PCB does not support under glow lighting,
for green case I think using GMK camping or GMK wild would be super dope
What about GMK Botanical?
Post by: leexy on Thu, 25 June 2020, 23:45:11
Post by: airyimbin on Thu, 25 June 2020, 23:46:06
@Vulcan can you provide the layout options for the hotswap PCB? can only see the solder PCB layout in the first postHotswap is fixed layout. It's hard to do multi with those sockets.
Sent from my SM-N960U using Tapatalk
Post by: Vulcan on Fri, 26 June 2020, 00:32:16
@Vulcan can you provide the layout options for the hotswap PCB? can only see the solder PCB layout in the first post
It's on kbdfans website.. bottom page
Post by: bakuretsu on Fri, 26 June 2020, 05:41:36
Post by: leexy on Fri, 26 June 2020, 06:12:51
@Vulcan can you provide the layout options for the hotswap PCB? can only see the solder PCB layout in the first post
It's on kbdfans website.. bottom page
thanks, saw it now.
are there any prototype photos of the PC case? the one on the site looks like a render.
Post by: StoryB on Fri, 26 June 2020, 06:47:50
Post by: prognostics on Fri, 26 June 2020, 07:53:29
30 dollars for shipping is cheap??Can we get confirmation on colors? Particularly interested in green. Is it still Pine Grove (19-5406 TCX)?
Forest green did make it! It is live on KBDfans, not purchasable yet.
Alu Black Alu Deep Blue Alu Dark Green Polycarbonate Alu Grey
EDIT: Ordered the Dark Green! Shipping to the US was pretty cheap.
If you want a solder and hot swap PCB, it is $10 cheaper to order the keyboard with a hot swap PCB and add the solderable. Use ILOVEKBDFANS for $2 off.
So excited to get this keyboard!
Sent from my iPhone using Tapatalk
Space65 shipping for me was $60. By that metric, $30 is cheap ;D
Post by: LuckyBoiz on Fri, 26 June 2020, 14:07:58
Also any word on how long from the end of GB to shipping? the typical 6 month situation?
Post by: thanhtai2001 on Sat, 27 June 2020, 05:40:26
Also any word on how long from the end of GB to shipping? the typical 6 month situation?I hope it'll take less than that, waiting for the GB is long enough :(
Post by: bakuretsu on Sat, 27 June 2020, 09:09:26
Considering this is an unlimited group buy that will be open for a few weeks, I'm not expecting these any sooner that a year from now. Unless they ship them out in waves as they finish batches.Also any word on how long from the end of GB to shipping? the typical 6 month situation?I hope it'll take less than that, waiting for the GB is long enough :(
Post by: TalksToChalk on Mon, 29 June 2020, 19:12:35
Post by: jaywhyokay on Mon, 29 June 2020, 20:04:09
Overall good work on the keyboard and I really appreciate how you and KBDfans decided to make it an unlimited Group Buy and care about the QC of it.
Post by: GergWorst on Tue, 30 June 2020, 04:49:50
Post by: sprigun on Wed, 01 July 2020, 08:56:13
Post by: bakuretsu on Wed, 01 July 2020, 09:26:07
Does anyone know whether the left space bar for hotswap PCB can support split to 2.25U + 1U? E.g. if I were to solder just those two keys would that work on the hotswap PCB?
PCBs that use Kailh hot swap sockets typically have a fixed layout because you can't closely overlap the sockets due to their size and shape. That means the PCBs are designed to only have holes for switches at the points where the hot swap sockets are supposed to be located.
So basically, no. You can't use any other layout on the hot swap PCB than what is shown in the layout diagram.
Post by: sprigun on Wed, 01 July 2020, 09:38:18
Does anyone know whether the left space bar for hotswap PCB can support split to 2.25U + 1U? E.g. if I were to solder just those two keys would that work on the hotswap PCB?So basically, no. You can't use any other layout on the hot swap PCB than what is shown in the layout diagram.
Dang! I was hoping to pair the GMK Lasers base kit without having to buy extra space bars with the Maja... thanks for the explanation :thumb:
Post by: ahauser31 on Mon, 27 July 2020, 00:45:14
I placed an order for a Maja and am currently planning on which key caps to get. Could you (or anyone who knows) confirm the last row configuration?
I have it as 1.5u, 1.5u, 2.0u + 1.25u (or 2.25u + 1.0u for solder alternative), 2.75u, 1.5u
Is that correct?
Post by: Poesjuh on Mon, 27 July 2020, 02:21:16
@Vulcan:Correct
I placed an order for a Maja and am currently planning on which key caps to get. Could you (or anyone who knows) confirm the last row configuration?
I have it as 1.5u, 1.5u, 2.0u + 1.25u (or 2.25u + 1.0u for solder alternative), 2.75u, 1.5u
Is that correct?
Sent from my iPhone using Tapatalk
Post by: ahauser31 on Thu, 30 July 2020, 04:40:42
Post by: iocab on Sun, 09 August 2020, 13:14:57
I didn't see it when reading through this, thank you.
Post by: BedsideTiger on Sun, 30 August 2020, 00:01:41
Is there info on what sort of aluminum this is?
I didn't see it when reading through this, thank you.
More than likely it's 6061
Post by: Sudorm on Sat, 19 September 2020, 10:06:47
Post by: elmo on Sat, 19 September 2020, 10:10:34
Will there be any updates in the near future?
There are updates in the GB thread
https://geekhack.org/index.php?topic=107154.0
Post by: Sudorm on Sat, 19 September 2020, 10:24:12
Is the shipping date still 30th September?
Post by: Sudorm on Sat, 19 September 2020, 11:29:03
https://kbdfans.com/collections/maja/products/coming-soon-vulcan-x-kbdfans-maja-mechanical-keyboard-diy-kit
"Shipping date: Expected to ship in November"
Post by: MoarCoffeePlzzz on Sat, 19 September 2020, 15:16:46
Post by: mgh112 on Sat, 19 September 2020, 17:05:27
Looking to get rid of my Hotswap Green spot.
how is that done? i'm interested
Post by: MoarCoffeePlzzz on Sat, 19 September 2020, 22:25:22
Looking to get rid of my Hotswap Green spot.
how is that done? i'm interested
PM sent.