« previous next »
Pages: « 1 2 3 4 5 6 [7]     Go Down

Author Topic: [IC] Mech27-TKL | Custom Aluminum Keyboard [Launching]  (Read 95397 times)

0 Members and 1 Guest are viewing this topic.

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #300 on: Sat, 27 August 2016, 07:39:44 »
Quote from: duynguyenle on Sat, 27 August 2016, 07:37:19
I just noticed one of the holes on the switch plate is enlarged (position near the spacebar stabiliser), is there anything special about this switch position?

Erm... I just noticed that too.  I may have goofed on the design somehow... This is what prototypes are for!

EDIT: Files are fine, I'll talk to the manufacturer.  I was a little bit drunk when I looked it over last night so I somehow missed that.
« Last Edit: Sat, 27 August 2016, 07:46:01 by 27 »
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline joey

  • Posts: 2296
  • Location: UK
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #301 on: Sat, 27 August 2016, 08:00:55 »
Quote from: duynguyenle on Sat, 27 August 2016, 07:37:19
I just noticed one of the holes on the switch plate is enlarged (position near the spacebar stabiliser), is there anything special about this switch position?

Quote from: duynguyenle on Sat, 27 August 2016, 07:37:19
I just noticed one of the holes on the switch plate is enlarged (position near the spacebar stabiliser), is there anything special about this switch position?
LOL that switch is hilarious
Logged

Offline Vittra

  • Airflow Optimizer
  • Posts: 405
  • Location: Canada
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #302 on: Sat, 27 August 2016, 09:56:56 »
Looks good. I await R2 with winkeys.   :blank:
Logged
Filco MJ Linear R LE TKL

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5366
  • Location: United Kingdom
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Deposits Closed]
« Reply #303 on: Sat, 27 August 2016, 13:09:19 »
Quote from: 27 on Fri, 26 August 2016, 21:19:27
Show Image

Show Image

Show Image

Show Image

Show Image

I'm going to get one of the weights polished to compare.  I'm moving 650km on Sept 2nd, so I'm going to be holding off on shipping it until I have a shipping address in dorms.
That weight... Holy ****.
Logged

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Deposits Closed]
« Reply #304 on: Sat, 27 August 2016, 17:49:33 »
Quote from: xondat on Sat, 27 August 2016, 13:09:19
Quote from: 27 on Fri, 26 August 2016, 21:19:27
Show Image

Show Image

Show Image

Show Image

Show Image

I'm going to get one of the weights polished to compare.  I'm moving 650km on Sept 2nd, so I'm going to be holding off on shipping it until I have a shipping address in dorms.
That weight... Holy ****.

That better be a good "Holy ****"  ;)
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline FrostyToast

  • Litshoard
  • * Exquisite Elder
  • Posts: 2368
  • Location: Canada
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Deposits Closed]
« Reply #305 on: Sat, 27 August 2016, 17:55:57 »
Quote from: 27 on Sat, 27 August 2016, 17:49:33
Quote from: xondat on Sat, 27 August 2016, 13:09:19
Quote from: 27 on Fri, 26 August 2016, 21:19:27
Show Image

Show Image

Show Image

Show Image

Show Image

I'm going to get one of the weights polished to compare.  I'm moving 650km on Sept 2nd, so I'm going to be holding off on shipping it until I have a shipping address in dorms.
That weight... Holy ****.

That better be a good "Holy ****"  ;)

"Holy ****" is my reaction looking at your C key.
Logged
Quote from: elton5354
I don't need anymore keyboards

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Deposits Closed]
« Reply #306 on: Sat, 27 August 2016, 18:04:57 »
Quote from: FrostyToast on Sat, 27 August 2016, 17:55:57
Quote from: 27 on Sat, 27 August 2016, 17:49:33
Quote from: xondat on Sat, 27 August 2016, 13:09:19
Quote from: 27 on Fri, 26 August 2016, 21:19:27
Show Image

Show Image

Show Image

Show Image

Show Image

I'm going to get one of the weights polished to compare.  I'm moving 650km on Sept 2nd, so I'm going to be holding off on shipping it until I have a shipping address in dorms.
That weight... Holy ****.

That better be a good "Holy ****"  ;)

"Holy ****" is my reaction looking at your C key.

Shh I'm talking to the manufacturer tonight, all will be well.   :'(
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline gadzkun

  • Posts: 555
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #307 on: Sun, 28 August 2016, 09:14:36 »
what postal service you will use? canada postal service? or DHL?
Logged

Offline duynguyenle

  • Posts: 1388
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #308 on: Sun, 28 August 2016, 09:20:53 »
27, do you have a rough timeframe for when you will run the GB and how long the buy period goes for? I would appreciate it if you could push it to a bit later, October perhaps... Helps with my budget  :thumb:
Logged
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline Chachal

  • Posts: 38
  • Location: Poland
    • Keyboard Wear
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #309 on: Sun, 28 August 2016, 09:30:57 »
I can't decide. Should I join Mech27 gb or wait for Mira. If Mech27, black or silver case would be a safe choice to match with keycaps, but this gold case is just gorgeous. What keycaps set would fit it well?
Logged

Pok3r (MX Clear)

Offline Funtast

  • Posts: 41
  • Location: Russian Federation
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #310 on: Sun, 28 August 2016, 09:35:55 »
Greetings !
I'm a bit out of topic.
Please tell me exactly how many will be on the boards of group buy?
And when it starts up ?
Logged

Offline SevenU

  • Posts: 46
  • Location: Michigan
  • Grimace is Black
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #311 on: Sun, 28 August 2016, 11:54:59 »
Quote from: Funtast on Sun, 28 August 2016, 09:35:55
Greetings !
I'm a bit out of topic.
Please tell me exactly how many will be on the boards of group buy?
And when it starts up ?
100 boards total. 30 spots already taken. GB is expected to start early to mid-september.
Logged
Something, Something, blah, blah, blahbitty, blah

Offline Funtast

  • Posts: 41
  • Location: Russian Federation
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #312 on: Sun, 28 August 2016, 13:35:26 »
Quote from: SevenU on Sun, 28 August 2016, 11:54:59
Quote from: Funtast on Sun, 28 August 2016, 09:35:55
Greetings !
I'm a bit out of topic.
Please tell me exactly how many will be on the boards of group buy?
And when it starts up ?
100 boards total. 30 spots already taken. GB is expected to start early to mid-september.

Thx!
Logged

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #313 on: Sun, 28 August 2016, 13:49:40 »
Quote from: gadzkun on Sun, 28 August 2016, 09:14:36
what postal service you will use? canada postal service? or DHL?

It'll be Canada post.  I'm going to look into getting a dhl account in the future.
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #314 on: Sun, 28 August 2016, 21:51:41 »
Alright I'm talking with the manufacturer, seems like it was a toolpath issue that caused the hole.  I'm going to receive those plates as-is since I'd prefer to have them sooner rather than later, and they'll fix the issue for the full run :)

(Yes I'm being reimbursed for the mess-up)
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline alienman82

  • * Elevated Elder
  • Posts: 4051
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #315 on: Sun, 28 August 2016, 21:52:19 »
removed.
« Last Edit: Thu, 01 March 2018, 14:14:39 by alienman82 »
Logged

Offline WarCommand

  • Posts: 115
  • Location: USA
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #316 on: Wed, 31 August 2016, 11:55:08 »
Watching thread so I don't miss out...again.
Logged

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #317 on: Wed, 31 August 2016, 11:56:55 »
Quote from: WarCommand on Wed, 31 August 2016, 11:55:08
Watching thread so I don't miss out...again.

I'll be giving 24 hour notice and a countdown this time ;)
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline Fictiouz

  • That "White" Guy
  • Posts: 465
  • Location: Halifax, NS, CA
  • "You miss 100% of the shots you take." -S. Trooper
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #318 on: Wed, 31 August 2016, 12:00:06 »
Quote from: 27 on Wed, 31 August 2016, 11:56:55
Quote from: WarCommand on Wed, 31 August 2016, 11:55:08
Watching thread so I don't miss out...again.

I'll be giving 24 hour notice and a countdown this time ;)

For the actual sale? I missed the deposits too. Was going to get number 10 for Guy LaFleur; can't get much more Canadian than that.
Logged
Halifax, NS Meetup | "I know you'll come back to me, I'm like a good kind of herpes, I'm impossible to get rid of." - 27
67g Zilent V2 M60-A | BKE Redux HHKB Professional 2 | 62g Silent Black Planck | 62g Vint Black Tex Yoda II | Bolt-Modded Model M 1391301

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #319 on: Wed, 31 August 2016, 12:00:56 »
Quote from: Fictiouz on Wed, 31 August 2016, 12:00:06
Quote from: 27 on Wed, 31 August 2016, 11:56:55
Quote from: WarCommand on Wed, 31 August 2016, 11:55:08
Watching thread so I don't miss out...again.

I'll be giving 24 hour notice and a countdown this time ;)

For the actual sale? I missed the deposits too. Was going to get number 10 for Guy LaFleur; can't get much more Canadian than that.

Yupp, actual sale will be announced beforehand.
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline WarCommand

  • Posts: 115
  • Location: USA
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #320 on: Wed, 31 August 2016, 12:16:53 »
Quote from: 27 on Wed, 31 August 2016, 11:56:55
Quote from: WarCommand on Wed, 31 August 2016, 11:55:08
Watching thread so I don't miss out...again.

I'll be giving 24 hour notice and a countdown this time ;)
;D  :-*
Logged

Offline gadzkun

  • Posts: 555
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #321 on: Thu, 01 September 2016, 02:27:08 »
Quote from: 27 on Sun, 28 August 2016, 13:49:40
Quote from: gadzkun on Sun, 28 August 2016, 09:14:36
what postal service you will use? canada postal service? or DHL?

It'll be Canada post.  I'm going to look into getting a dhl account in the future.

Can it be tracked down? I really interested but I heard bad rumors about canada post  :'(
Logged

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #322 on: Thu, 01 September 2016, 02:34:44 »
Quote from: gadzkun on Thu, 01 September 2016, 02:27:08
Quote from: 27 on Sun, 28 August 2016, 13:49:40
Quote from: gadzkun on Sun, 28 August 2016, 09:14:36
what postal service you will use? canada postal service? or DHL?

It'll be Canada post.  I'm going to look into getting a dhl account in the future.

Can it be tracked down? I really interested but I heard bad rumors about canada post  :'(
Every package will be sent with tracking if possible. I've never had any problems with them, and it seems like the strike crisis has been avoided :)
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline gadzkun

  • Posts: 555
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #323 on: Thu, 01 September 2016, 02:44:38 »
Quote from: 27 on Thu, 01 September 2016, 02:34:44
Quote from: gadzkun on Thu, 01 September 2016, 02:27:08
Quote from: 27 on Sun, 28 August 2016, 13:49:40
Quote from: gadzkun on Sun, 28 August 2016, 09:14:36
what postal service you will use? canada postal service? or DHL?

It'll be Canada post.  I'm going to look into getting a dhl account in the future.

Can it be tracked down? I really interested but I heard bad rumors about canada post  :'(
Every package will be sent with tracking if possible. I've never had any problems with them, and it seems like the strike crisis has been avoided :)

With tracking Ok im sold  :p
Logged

Offline JacuZ

  • Posts: 5
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #324 on: Thu, 01 September 2016, 02:56:41 »
Aluminum TKL with a diffuser? Yeah count me in. Only complaint is the lack of a winkey option, any chance of this happening?
Logged

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #325 on: Thu, 01 September 2016, 03:23:00 »
Quote from: JacuZ on Thu, 01 September 2016, 02:56:41
Aluminum TKL with a diffuser? Yeah count me in. Only complaint is the lack of a winkey option, any chance of this happening?
Maybe r2, definitely not this round.
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline sitch

  • Posts: 259
  • Location: Malaysia
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #326 on: Sun, 04 September 2016, 11:33:27 »
can it ship directly from china?
Logged

Offline Capmerica

  • Posts: 41
  • Location: San Jose, California
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #327 on: Sun, 04 September 2016, 13:32:20 »
Will the RGB Led on the board comes pre-soldered? Anyone knows a reliable keyboard service in Bay Area?


Sent from my iPhone using Tapatalk
Logged

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #328 on: Thu, 08 September 2016, 21:07:38 »
Sorry I haven't been very active, college has been a bit of a hard transition period for the first week or so.  The answers to your questions are...

Quote from: Capmerica on Sun, 04 September 2016, 13:32:20
Will the RGB Led on the board comes pre-soldered? Anyone knows a reliable keyboard service in Bay Area?


Sent from my iPhone using Tapatalk

Yes.

Quote from: sitch on Sun, 04 September 2016, 11:33:27
can it ship directly from china?

No.



I'll be trying to get orders opened sometime next week after I receive the prototypes, but may postpone it so I can wrap up my Fosen switch groupbuy.
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #329 on: Fri, 09 September 2016, 07:14:03 »
What are everyone's thoughts on having delivery in December?  The lack of storage and transportation here in Ottawa may be a huge limitation, but if I send everything to my parents I could have it all shipped out in mid December when I return after the semester.  This is just an idea, and I definitely want to know what you think.  If I did this I'd be able to complete the groupbuy much more reliably, but obviously there would be a longer wait time.
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline joey

  • Posts: 2296
  • Location: UK
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #330 on: Fri, 09 September 2016, 07:44:26 »
Quote from: 27 on Fri, 09 September 2016, 07:14:03
What are everyone's thoughts on having delivery in December?  The lack of storage and transportation here in Ottawa may be a huge limitation, but if I send everything to my parents I could have it all shipped out in mid December when I return after the semester.  This is just an idea, and I definitely want to know what you think.  If I did this I'd be able to complete the groupbuy much more reliably, but obviously there would be a longer wait time.
I kinda assumed it'd be around December anyway. The only bad thing about December is it's near Christmas, so there will be a loooot of mail. (Not sure if that's really an issue)
Logged

Offline duynguyenle

  • Posts: 1388
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #331 on: Fri, 09 September 2016, 11:36:47 »
Quote from: 27 on Fri, 09 September 2016, 07:14:03
What are everyone's thoughts on having delivery in December?  The lack of storage and transportation here in Ottawa may be a huge limitation, but if I send everything to my parents I could have it all shipped out in mid December when I return after the semester.  This is just an idea, and I definitely want to know what you think.  If I did this I'd be able to complete the groupbuy much more reliably, but obviously there would be a longer wait time.

Delay on the opening of the GB stage is good for me  :thumb:

December is fine too, I am quite busy with work so even if it gets here early I wouldn't have the time to build it.
Logged
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline SevenU

  • Posts: 46
  • Location: Michigan
  • Grimace is Black
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #332 on: Fri, 09 September 2016, 17:35:21 »
I would personally like it to be here before then, but I don't really want to be "that guy".

Sent from my KIW-L24 using Tapatalk

Logged
Something, Something, blah, blah, blahbitty, blah

Offline Chachal

  • Posts: 38
  • Location: Poland
    • Keyboard Wear
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #333 on: Fri, 09 September 2016, 19:44:52 »
I'm fine with wating but I worry about shipping it just before Chrismes.
Logged

Pok3r (MX Clear)

Offline gadzkun

  • Posts: 555
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #334 on: Fri, 09 September 2016, 20:38:13 »
Quote from: Chachal on Fri, 09 September 2016, 19:44:52
I'm fine with wating but I worry about shipping it just before Chrismes.

Agreed. many lost package because long holiday (chris - new year)
for international orders its better to sent it early december or early january
avoid mid to late december. I remember buy caps from pmk on mid december it takes 2-3 month to arrive
And i buy caps from pmk again on early january it only takes 10 days
Logged

Offline kawasaki161

  • Posts: 1059
  • Location: Germany
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #335 on: Sat, 10 September 2016, 02:44:50 »
Can comfirm that. Even within Europe shipping is fd up over christmas. Domestic shipping is usually no problem (maybe a day late) but when I order something from the UK it takes at least twice the time  when it gets shipped mid-late december compared to early december or january.
Logged

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #336 on: Mon, 12 September 2016, 14:48:30 »
I'll have everything ready to go mid December (I hope) and I can ship early January.
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #337 on: Mon, 12 September 2016, 14:48:50 »
Boop

Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #338 on: Mon, 12 September 2016, 15:37:40 »
Beep

Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline Hexterdude

  • Posts: 602
  • Location: USA
  • I have a problem when it come to artisans
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #339 on: Mon, 12 September 2016, 15:45:25 »
Quote from: 27 on Mon, 12 September 2016, 15:37:40
Beep


beep boop beep beep

Translation: the time is nigh


Logged

Offline piemancoder

  • Posts: 275
  • Location: The Tardis
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #340 on: Mon, 12 September 2016, 15:58:48 »
Quote from: 27 on Mon, 12 September 2016, 15:37:40
Beep


not buying because vertical video

jk

or am i
Logged
Yoda grammar best has

Offline Vigrith

  • Posts: 1843
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #341 on: Mon, 12 September 2016, 16:17:29 »
I'm fairly convinced that is the best video I have ever watched. Vertical and all.
Logged

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #342 on: Mon, 12 September 2016, 16:27:26 »
Quote from: Vigrith on Mon, 12 September 2016, 16:17:29
I'm fairly convinced that is the best video I have ever watched. Vertical and all.

Thank you, I took inspiration from Fire Brand's videos and Absolut vodka.
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Prototype Pictures]
« Reply #343 on: Thu, 15 September 2016, 21:45:08 »
GB thread is awaiting approval.
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline 27

  • Thread Starter
  • Posts: 752
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: [IC] Mech27-TKL | Custom Aluminum Keyboard [Launching]
« Reply #344 on: Thu, 15 September 2016, 21:52:55 »
Logged
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/
Pages: « 1 2 3 4 5 6 [7]     Go Up
« previous next »