Author Topic: Satan GH60 (Read 131016 times)

frosty · « **on:** Fri, 12 December 2014, 10:19:36 »

I actually plan on buying this pcb when I visit armygroup in about 2 days.

Is it proven working? Seems like there is led holes for every switch... which wasn't on the original GH60 without a additional controller.

Help would be much appreciated!

dustinhxc · « **Reply #1 on:** Fri, 12 December 2014, 10:33:44 »

Hmmm.. Satan edition of GH60.. Never heard of it.

SpAmRaY · « **Reply #2 on:** Fri, 12 December 2014, 10:35:49 »

https://geekhack.org/index.php?topic=63017.0

http://www.enjoyclick.org/forum.php?mod=viewthread&tid=6600

http://www.pcwaishe.cn/thread-595247-1-1.html

dustinhxc · « **Reply #3 on:** Fri, 12 December 2014, 10:37:34 »

Quote from: SpAmRaY on Fri, 12 December 2014, 10:35:49

https://geekhack.org/index.php?topic=63017.0

http://www.enjoyclick.org/forum.php?mod=viewthread&tid=6600

http://www.pcwaishe.cn/thread-595247-1-1.html

So this is real? Thats insane! lmao

frosty · « **Reply #4 on:** Fri, 12 December 2014, 10:44:24 »

Quote from: SpAmRaY on Fri, 12 December 2014, 10:35:49

https://geekhack.org/index.php?topic=63017.0

http://www.enjoyclick.org/forum.php?mod=viewthread&tid=6600

http://www.pcwaishe.cn/thread-595247-1-1.html

thanks ray, since i know chinese i'll probably check it out over there, will update this thread with comments and possibly pictures!

Lu_e · « **Reply #5 on:** Fri, 12 December 2014, 15:06:11 »

haha... u wat?

Manchias · « **Reply #6 on:** Tue, 07 April 2015, 10:39:13 »

Quote from: frosty on Fri, 12 December 2014, 10:19:36

I actually plan on buying this pcb when I visit armygroup in about 2 days.

Is it proven working? Seems like there is led holes for every switch... which wasn't on the original GH60 without a additional controller.

Help would be much appreciated!

Frosty, I accident bought a GH60 Satan too, and I'm having trouble with it firmware. Can you please share GH60 Satan's original firmware please ( if you have ).

Thank you

hwood34 · « **Reply #7 on:** Tue, 07 April 2015, 11:42:09 »

actually if anyone has a line on these still I'd be interested in one

jdcarpe · « **Reply #8 on:** Tue, 07 April 2015, 11:45:05 »

Quote from: hwood34 on Tue, 07 April 2015, 11:42:09

actually if anyone has a line on these still I'd be interested in one

Yeah, since it doesn't look like the actual GH60s are ever going to ship.

I just ordered one from taobao seller loveq. Maybe someone could get in contact with him? He sells Gaterons, GH60 Satan, and stabilizers through taobao, but I'd rather deal with him directly without a taobao agent, if at all possible.

hwood34 · « **Reply #9 on:** Tue, 07 April 2015, 11:50:40 »

Quote from: jdcarpe on Tue, 07 April 2015, 11:45:05

Quote from: hwood34 on Tue, 07 April 2015, 11:42:09
actually if anyone has a line on these still I'd be interested in one

Yeah, since it doesn't look like the actual GH60s are ever going to ship.

I just ordered one from taobao seller loveq. Maybe someone could get in contact with him? He sells Gaterons, GH60 Satan, and stabilizers through taobao, but I'd rather deal with him directly without a taobao agent, if at all possible.

I'm ready for the Satan GB

pasph · « **Reply #10 on:** Tue, 07 April 2015, 12:01:43 »

Quote from: jdcarpe on Tue, 07 April 2015, 11:45:05

Yeah, since it doesn't look like the actual GH60s are ever going to ship.

Is this a semi-official statement?

jdcarpe · « **Reply #11 on:** Tue, 07 April 2015, 12:03:58 »

Quote from: pasph on Tue, 07 April 2015, 12:01:43

Quote from: jdcarpe on Tue, 07 April 2015, 11:45:05

Yeah, since it doesn't look like the actual GH60s are ever going to ship.

Is this a semi-official statement?

Not at all. Just a statement of disappointment.

Data · « **Reply #12 on:** Tue, 07 April 2015, 13:08:25 »

These look great and they only cost your mortal soul.

nubbinator · « **Reply #13 on:** Tue, 07 April 2015, 13:29:53 »

sakai4eva · « **Reply #14 on:** Tue, 07 April 2015, 15:24:16 »

Just finished assembling mine with Gateron 35g linears.

Only issue currently is trying to figure out how to modify the layout...

ramnes · « **Reply #15 on:** Thu, 09 April 2015, 18:51:28 »

Please someone make a full review/guide of that PCB when you got it working! I really want one, but I'd like to read some positive things before.

agong8664 · « **Reply #16 on:** Thu, 09 April 2015, 22:36:48 »

Hello guys, I am from Taiwan and I have bought 2 satan PCBs and now using one of them typing this.

For customizing keymap http://www.keyboard-layout-editor.com/#/layouts/7d55431c8a8d9f9bf94b6f6af8ce7c12
The layout displayed is the original design

For firmware download http://www.enjoyclick.org/tkg/
choose GH60 (RevCHN) in general section

sakai4eva · « **Reply #17 on:** Thu, 09 April 2015, 22:58:55 »

Quote from: ramnes on Thu, 09 April 2015, 18:51:28

Please someone make a full review/guide of that PCB when you got it working! I really want one, but I'd like to read some positive things before.

It's a decent 60% PCB. Not as many LED control options as NERDs or b.87 series, but it's good.

sakai4eva · « **Reply #18 on:** Fri, 10 April 2015, 03:33:12 »

Sorry for double posting but I've finally figured out this board.

I'll post an in depth review and programming thread if anyone is interested, but generally this PCB is more than decent for what it does.

ramnes · « **Reply #19 on:** Fri, 10 April 2015, 04:44:02 »

Yep, please post and keep us informed.

sakai4eva · « **Reply #20 on:** Fri, 10 April 2015, 06:13:59 »

Quote from: ramnes on Fri, 10 April 2015, 04:44:02

Yep, please post and keep us informed.

This might take a while...

berserkfan · « **Reply #21 on:** Sat, 11 April 2015, 11:13:58 »

Are the users of this keyboard to be known as Satanists henceforth?

Sometimes I wish I never got addicted to matrix boards. Now I can't get involved with these interesting buys. But then again, by being addicted to matrixes, I conveniently excuse myself from buying many things that are 'high quality and awesome' but which I don't actually need.

mashby · « **Reply #22 on:** Mon, 13 April 2015, 13:53:30 »

I wish someone would setup a group buy for these. I'm not as brave as JD, but would love to get one.

hwood34 · « **Reply #23 on:** Mon, 13 April 2015, 21:46:38 »

Quote from: mashby on Mon, 13 April 2015, 13:53:30

I wish someone would setup a group buy for these. I'm not as brave as JD, but would love to get one.

I might try and get something together in the somewhat distant future (rather not be running 4 buys at the same time

)

sakai4eva · « **Reply #24 on:** Tue, 14 April 2015, 08:11:04 »

https://imgur.com/a/rfezG

The firmware instructions, in case anybody needs it. I can also provide the original AIO 2-layer layout if anybody needs it, but for me one of the major joys of having a custom board is customizing the layers and layouts, so...

frosty · « **Reply #25 on:** Thu, 16 April 2015, 05:56:55 »

Eh, sorry I don't post much (if at all) anymore. No I didn't buy a Satan PCB but would love to get one since I was just awarded a scholarship hehe.

Manchias · « **Reply #26 on:** Mon, 20 April 2015, 22:16:40 »

Quote from: Stabilized on Thu, 16 April 2015, 05:38:08

Quote from: sakai4eva on Tue, 14 April 2015, 08:11:04
https://imgur.com/a/rfezG

The firmware instructions, in case anybody needs it. I can also provide the original AIO 2-layer layout if anybody needs it, but for me one of the major joys of having a custom board is customizing the layers and layouts, so...

For some reason my keyboard doesn't seem to go past the "waiting for bootloader...." stage with reflash.bat. Do I need additional drivers or something?

Edit: Just installed zadig.exe for the appropriate drivers, this time is wrote to the keyboard but now it won't work!

Edit2: Managed to get it to somewhat work by reflashing the firmware to it (not the same as the one that came with it as it doesn't seem to account for the pinky function). Not really sure what to do as the layout is still less than ideal.

Sorry if this is pretty nooby, never had a keyboard that runs on this firmware before!

Same thing happen for my GH60, eventhough I use GH60_revCH firmware which included in the tool.

Stabilized · « **Reply #27 on:** Tue, 21 April 2015, 03:00:36 »

Quote from: Manchias on Mon, 20 April 2015, 22:16:40

Same thing happen for my GH60, eventhough I use GH60_revCH firmware which included in the tool.

Have you managed to get the keyboard working?

I don't think I made it very clear what I was doing in my reply. What I did was I used the firmware found here:
https://github.com/comicchang/tmk_keyboard/tree/master/keyboard/amj60
All the firmwares that came in that tool (tkg-toolkit) are not suitable with my keyboard (the AMJ60). I did flash it with the tool, but I had to use the LUFA_dfu apposed to the ATMEL_dfu, as I tried to use all the tools linked to by Hasu in the TMK thread but none of them found my keyboard (FLIP, Avrdude, etc.).
I am now back on the 'default' keymap for this PCB, which isn't the same one as the one that came on it when it shipped (like I said in my last post the pink fn doesn't work).
When I try to flash a new keymap (using TMK make commands) it always gives me the default keymap, even though I follow Hasu's instructions exactly.

I am hoping that someone with more experience in this area can help me out!

Ryu · « **Reply #28 on:** Thu, 23 April 2015, 05:35:50 »

Quote from: Stabilized on Thu, 16 April 2015, 05:38:08

Quote from: sakai4eva on Tue, 14 April 2015, 08:11:04
https://imgur.com/a/rfezG

The firmware instructions, in case anybody needs it. I can also provide the original AIO 2-layer layout if anybody needs it, but for me one of the major joys of having a custom board is customizing the layers and layouts, so...

For some reason my keyboard doesn't seem to go past the "waiting for bootloader...." stage with reflash.bat. Do I need additional drivers or something?

Edit: Just installed zadig.exe for the appropriate drivers, this time is wrote to the keyboard but now it won't work!

Edit2: Managed to get it to somewhat work by reflashing the firmware to it (not the same as the one that came with it as it doesn't seem to account for the pinky function). Not really sure what to do as the layout is still less than ideal.

Sorry if this is pretty nooby, never had a keyboard that runs on this firmware before!

I'm my fault.
I arbitrarily updated the dfu-programmer shipped with tkg-toolkit so it's necessary to update the driver of ATm32U4DFU (NOT GH60) to a WinUSB version by using Zadig.
Sorry to make you confused.

Manchias · « **Reply #29 on:** Sun, 26 April 2015, 20:15:39 »

Quote from: Stabilized on Tue, 21 April 2015, 03:00:36

Quote from: Manchias on Mon, 20 April 2015, 22:16:40
Same thing happen for my GH60, eventhough I use GH60_revCH firmware which included in the tool.

Have you managed to get the keyboard working?

I don't think I made it very clear what I was doing in my reply. What I did was I used the firmware found here:
https://github.com/comicchang/tmk_keyboard/tree/master/keyboard/amj60
All the firmwares that came in that tool (tkg-toolkit) are not suitable with my keyboard (the AMJ60). I did flash it with the tool, but I had to use the LUFA_dfu apposed to the ATMEL_dfu, as I tried to use all the tools linked to by Hasu in the TMK thread but none of them found my keyboard (FLIP, Avrdude, etc.).
I am now back on the 'default' keymap for this PCB, which isn't the same one as the one that came on it when it shipped (like I said in my last post the pink fn doesn't work).
When I try to flash a new keymap (using TMK make commands) it always gives me the default keymap, even though I follow Hasu's instructions exactly.

I am hoping that someone with more experience in this area can help me out!

The keyboard still working, but not the same as when it shipped. The original one have Fn at the Left-Win button while after I flash with GH60_revCH, there is no Fn button at all.

Ryu · « **Reply #30 on:** Sun, 26 April 2015, 20:49:42 »

Quote from: Manchias on Sun, 26 April 2015, 20:15:39

Quote from: Stabilized on Tue, 21 April 2015, 03:00:36
Quote from: Manchias on Mon, 20 April 2015, 22:16:40
Same thing happen for my GH60, eventhough I use GH60_revCH firmware which included in the tool.

Have you managed to get the keyboard working?

I don't think I made it very clear what I was doing in my reply. What I did was I used the firmware found here:
https://github.com/comicchang/tmk_keyboard/tree/master/keyboard/amj60
All the firmwares that came in that tool (tkg-toolkit) are not suitable with my keyboard (the AMJ60). I did flash it with the tool, but I had to use the LUFA_dfu apposed to the ATMEL_dfu, as I tried to use all the tools linked to by Hasu in the TMK thread but none of them found my keyboard (FLIP, Avrdude, etc.).
I am now back on the 'default' keymap for this PCB, which isn't the same one as the one that came on it when it shipped (like I said in my last post the pink fn doesn't work).
When I try to flash a new keymap (using TMK make commands) it always gives me the default keymap, even though I follow Hasu's instructions exactly.

I am hoping that someone with more experience in this area can help me out!

The keyboard still working, but not the same as when it shipped. The original one have Fn at the Left-Win button while after I flash with GH60_revCH, there is no Fn button at all.

If the tool always stops at "waiting for bootloader...." stage, please try to update the driver of ATm32U4DFU device to a WinUSB version by using Zadig which shipped with the latest version of tkg-toolkit.

Stabilized · « **Reply #31 on:** Mon, 27 April 2015, 16:14:57 »

Quote from: Manchias on Sun, 26 April 2015, 20:15:39

The keyboard still working, but not the same as when it shipped. The original one have Fn at the Left-Win button while after I flash with GH60_revCH, there is no Fn button at all.

Same for me

Hope that someone can help as I don't really know what to do (tried making different keymaps, but they either don't work or are just the default one).

Tiramisuu · « **Reply #32 on:** Wed, 29 April 2015, 18:10:06 »

It would be nice to see the final version of the GH60. Holding the final pcb out of the public domain until the never ending group buy finally delivers or everyone has died of old age is a shame.

I suspect there would be plenty of GH's built if the final board revision was available.

sakai4eva · « **Reply #33 on:** Thu, 30 April 2015, 02:34:20 »

Quote from: Tiramisuu on Wed, 29 April 2015, 18:10:06

It would be nice to see the final version of the GH60. Holding the final pcb out of the public domain until the never ending group buy finally delivers or everyone has died of old age is a shame.

I suspect there would be plenty of GH's built if the final board revision was available.

Just get the damn China board. No more fvcks given.

Full build log inside with ****ty placeholder caps:
https://imgur.com/a/WfmHW

kekstee · « **Reply #34 on:** Fri, 29 May 2015, 14:28:02 »

So where did you guys order yours?
Just found this link, but I'm unsure what to make of it: http://www.aliexpress.com/item/Satan-GH60-PCB-White-Board-LED-DIY-Mechanical-Keyboard/32266124434.html

Also that one thread linked in the first post talks about slight mounting hole differences - is that fixed currently?
I just think I really need either this or GON now, else I'm going insane waiting for that groupbuy.

hwood34 · « **Reply #35 on:** Fri, 29 May 2015, 16:21:14 »

Quote from: kekstee on Fri, 29 May 2015, 14:28:02

So where did you guys order yours?
Just found this link, but I'm unsure what to make of it: http://www.aliexpress.com/item/Satan-GH60-PCB-White-Board-LED-DIY-Mechanical-Keyboard/32266124434.html

Also that one thread linked in the first post talks about slight mounting hole differences - is that fixed currently?
I just think I really need either this or GON now, else I'm going insane waiting for that groupbuy.

That's where everyone got theirs I'm pretty sure (I think more from Taobao before it was on ali). Seems a bit more expensive, not sure though

FreeChemicals · « **Reply #36 on:** Wed, 10 June 2015, 07:26:28 »

Well, my Satan GH60 is a real pain in the ass...

Code: [Select]

[ 2730.213494] usb 1-1.1.1: new full-speed USB device number 8 using ehci-pci
[ 2730.313447] input: geekhack GH60 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:FEED:6060.0003/input/input13
[ 2730.367102] hid-generic 0003:FEED:6060.0003: input,hidraw2: USB HID v1.11 Keyboard [geekhack GH60] on usb-0000:00:1a.0-1.1.1/input0
[ 2730.368276] input: geekhack GH60 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/0003:FEED:6060.0004/input/input14
[ 2730.368590] hid-generic 0003:FEED:6060.0004: input,hidraw3: USB HID v1.11 Mouse [geekhack GH60] on usb-0000:00:1a.0-1.1.1/input1
[ 2730.369972] input: geekhack GH60 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.2/0003:FEED:6060.0005/input/input15
[ 2730.420331] hid-generic 0003:FEED:6060.0005: input,hidraw4: USB HID v1.11 Device [geekhack GH60] on usb-0000:00:1a.0-1.1.1/input2
[ 2730.421467] hid-generic 0003:FEED:6060.0006: hiddev0,hidraw5: USB HID v1.11 Device [geekhack GH60] on usb-0000:00:1a.0-1.1.1/input3
[ 2730.422585] input: geekhack GH60 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.4/0003:FEED:6060.0007/input/input16
[ 2730.473756] hid-generic 0003:FEED:6060.0007: input,hidraw6: USB HID v1.11 Keyboard [geekhack GH60] on usb-0000:00:1a.0-1.1.1/input4
[ 2732.576816] usb 1-1.1.1: USB disconnect, device number 8
[ 2739.441068] usb 1-1.1.1: new low-speed USB device number 10 using ehci-pci
[ 2739.521107] usb 1-1.1.1: device descriptor read/64, error -32
[ 2739.704558] usb 1-1.1.1: device descriptor read/64, error -32
[ 2739.888015] usb 1-1.1.1: new low-speed USB device number 11 using ehci-pci
[ 2740.955124] usb 1-1.1.1: new low-speed USB device number 12 using ehci-pci
[ 2741.181859] usb 1-1.1.1: new low-speed USB device number 13 using ehci-pci
[ 2741.261904] usb 1-1.1.1: device descriptor read/64, error -32
[ 2741.828897] usb 1-1.1.1: new low-speed USB device number 14 using ehci-pci
[ 2742.655902] usb 1-1.1.1: new low-speed USB device number 15 using ehci-pci
[ 2742.869396] usb 1-1.1.1: new low-speed USB device number 16 using ehci-pci
[ 2743.276155] usb 1-1.1.1: new low-speed USB device number 17 using ehci-pci
[ 2743.356191] usb 1-1.1.1: device descriptor read/64, error -32
[ 2743.539675] usb 1-1.1.1: device descriptor read/64, error -32
[ 2743.722994] usb 1-1.1.1: new low-speed USB device number 18 using ehci-pci
[ 2743.803012] usb 1-1.1.1: device descriptor read/64, error -32

$:-\$

tofgerl · « **Reply #37 on:** Sun, 11 October 2015, 08:01:34 »

Is the Satan GH60 still a PITA? I'm suddenly in the market for three PCBs, and would like all three to be the same for simplicity, and for all three to use TMK. Is Satan a good choice, or should I get something more expensive?

ideus · « **Reply #38 on:** Sun, 11 October 2015, 08:17:59 »

Quote from: nubbinator on Tue, 07 April 2015, 13:29:53

Show Image

This is not funny, even as a joke.

jdcarpe · « **Reply #39 on:** Sun, 11 October 2015, 11:03:34 »

Quote from: ideus on Sun, 11 October 2015, 08:17:59

Quote from: nubbinator on Tue, 07 April 2015, 13:29:53
Show Image

This is not funny, even as a joke.

You have a problem with the Dark Lord? I believe we are all afforded freedom to our religious beliefs here at Geekhack.

ideus · « **Reply #40 on:** Sun, 11 October 2015, 11:14:14 »

Quote from: jdcarpe on Sun, 11 October 2015, 11:03:34

Quote from: ideus on Sun, 11 October 2015, 08:17:59
Quote from: nubbinator on Tue, 07 April 2015, 13:29:53
Show Image

This is not funny, even as a joke.

You have a problem with the Dark Lord? I believe we are all afforded freedom to our religious beliefs here at Geekhack.

I thought it was recommended to keep GH job friendly, this image may not be job friendly in most places I know, religious beliefs apart. Isn't it?

chyros · « **Reply #41 on:** Sun, 11 October 2015, 11:22:59 »

Quote from: ideus on Sun, 11 October 2015, 11:14:14

Quote from: jdcarpe on Sun, 11 October 2015, 11:03:34
Quote from: ideus on Sun, 11 October 2015, 08:17:59
Quote from: nubbinator on Tue, 07 April 2015, 13:29:53
Show Image

This is not funny, even as a joke.

You have a problem with the Dark Lord? I believe we are all afforded freedom to our religious beliefs here at Geekhack.

I thought there was recommended to keep GH job friendly, this image may not be job friendly in most places I know, religious beliefs apart. Isn't it?

How the hell (!) is that considered job unfriendly? I'd say if someone complained about that at work they'd probably be pretty damn fundamentalist nutjobs :p .

ideus · « **Reply #42 on:** Sun, 11 October 2015, 11:29:02 »

Let's keep the thread on topic: A GH60 PCB version and its characteristics.

tofgerl · « **Reply #43 on:** Sun, 11 October 2015, 11:32:03 »

... Yes... Is the Satan GH60 even remotely like the normal GH60? Or should I try to get a proper one instead? Either through the second-hand market now that they're shipping (a bit) or through a (hopefully) new round.

flabbergast · « **Reply #44 on:** Sun, 11 October 2015, 13:48:10 »

Quote from: tofgerl on Sun, 11 October 2015, 11:32:03

... Yes... Is the Satan GH60 even remotely like the normal GH60? Or should I try to get a proper one instead? Either through the second-hand market now that they're shipping (a bit) or through a (hopefully) new round.

You should consider the two (Satan GH60 and the proper GH60) as two different 60% PCBs, that don't have much in common except the form factor (60%) and the same MCU (atmega32u4). Different layout support, different row/col pinout, different backlight support, different quality... It's just plain annoying and the Chinese call their board GH60 for marketing purposes.

That does not mean that Satan GH60 is better or worse than GH60 - it depends on what you want.

Given that you'd probably be using TMK on both, the firmware that they come with does not matter at all. I would consider the quality of Satan GH60 as the same as most "Chinese" things - mostly acceptable/good, but QC sucks, so you may get a defective one. (By the way, the proper GH60s were also manufactured in China I think.)

I've order a different 60% PCB (Red Scarf II) from Taobao, and the quality was OK - everything worked fine, even though the PCB wasn't cleaned from flux.

tofgerl · « **Reply #45 on:** Sun, 11 October 2015, 13:51:40 »

Good answer! Thank you. Considering the price I think I'll try it, and be happy if they work and not surprised if they don't.

ideus · « **Reply #46 on:** Sun, 11 October 2015, 13:54:39 »

Quote from: tofgerl on Sun, 11 October 2015, 13:51:40

Good answer! Thank you. Considering the price I think I'll try it, and be happy if they work and not surprised if they don't.

Please report back your experience with the PCB, it may be interesting for other fellows.

tofgerl · « **Reply #47 on:** Sun, 11 October 2015, 14:14:50 »

Will do

sonwalker · « **Reply #48 on:** Sat, 17 October 2015, 13:23:43 »

I have a problem today. My PCB cant keymap. When i download the EEP from http://tkg.hanchen.me/, and reflash the pcb, mine doesnt accept new one layout, but return to the default layout like this http://www.keyboard-layout-editor.com/#/layouts/7d55431c8a8d9f9bf94b6f6af8ce7c12. Something wrong with the website, or with my PCB ??

flabbergast · « **Reply #49 on:** Sat, 17 October 2015, 14:11:44 »

@toneman77: It seems to me that the online TKG gadget does allow you to select AMJ60 as one of the keyboards (and generate keymap files), the tkg-toolkit does not come with a "base" firmware for AMJ60. Unless you know that AMJ60 is electrically the same as one of the ones for which there *is* a base firmware (see the tkg-toolkit/common/firmware directory), I'm not sure you can use that tool.

@sonwalker: What does "reflash the pcb" mean for you? The EEP file is only one small piece of the whole firmware, and you also need to make sure that the "main" firmware is one of the ones that reads the keymap from eeprom (e.g. the standard TMK does not do that).

News:

Author Topic: Satan GH60 (Read 131016 times)