Author Topic: [IC] Loki65, The Shapeshifting Board (multiple mounting options)  (Read 16093 times)

0 Members and 1 Guest are viewing this topic.

Offline Nedzc27

  • Thread Starter
  • Posts: 19
[IC] Loki65, The Shapeshifting Board (multiple mounting options)
« on: Fri, 26 February 2021, 10:44:28 »
263168-0

Story

Hi everyone, I’m a keyboard enthusiast residing in Singapore!
I’d like to introduce to you, the Loki65. It is a Full-CNC PC (Polycarbonate) board with the ability to shapeshift (we are looking at multiple mounting options).
I'm very excited to present this board to everyone here! I hope you will share this same excitement with me too. Let’s get on with it!


The Name: Loki65

The inspiration came from the board’s unique feature of having multiple mounting-options, providing different typing experience and sounds based on how the user configures it.
This board is pretty much a “shapeshifter”, and I reckon you would agree too after looking through this post? :D (upcoming diagrams below)
Hence, our favorite Norse God, Loki came to mind and became part of this project. (Any Viking fans around? Norse Mythology? Avengers?)


Research and Thought Process

As someone who prefers the sound of boards made of Polycarbonate over Aluminum, I wanted to design a board that encompasses Quality, Functionality, Diversity and not forgetting that THICC THOCK. Besides, there seems to be quite a lack options for high-end PC boards in the market right now, compared to the Aluminum counterparts. Isn't it?

Also, I've realized that many current Injection-Molded (IM) boards tend to have thin bezels or case "walls" which result in a fairly "hollow"-sounding and a less-than satisfactory typing experience.

I’m definitely not an expert at materials, but I’ve had my fair share of bad experience with other Polycarbonate keyboards in the current market. They’ve had “manufacturing-defects”, cracks, thread shears, and a few more issues.

I cannot be sure if they’re of inferior quality, but it certainly goes against known material properties/characteristics of Polycarbonate for being extremely durable. The Loki65 will only be using the best-quality PC sheets from the fabricators.

We do agree, IM cases do have their own benefits, most-notably their lower costs due to bulk production. However, according to fabricators, CNC is sometimes the preferred choice due to higher precision and better quality-control.

To summarize, this is a board designed to achieve the following:

1.   Full-CNC PC, with maximum quality, durability and sturdiness. We're talking about a thick, solid bezel and case.
2.   Screw-holes with Brass/Stainless steel inserts to ensure absolutely no thread-shearing (aka PC material gets shaved-off).
3.   Ability to customize the typing and sound experience due to the plate’s unique design (featured below, in this post).
4.   A high-end, premium keyboard.


Interest check form:
https://docs.google.com/forms/d/e/1FAIpQLSdXSoneFSZeU2XQFcIQ6az8Ma1c8x_pMKQmtrBb3ORjbhn1xw/viewform

Vote for your favourite badge(s), scroll down to see the renders:
https://forms.gle/SExGonRPG1BGUAni8

Discord link:
https://discord.gg/RHmR7HZK5J

Instagram:
https://instagram.com/loki65kb



Renders (Thank you @Kingk22 !)


GMK Olivia with Frosted PC

263101-1

263103-2

263105-3

GMK Oblivion with Ink Black PC

263168-4

263109-5

263112-6


Specifications:

Dimensions: 319mm (length), 118mm (width), 20mm (front height). Back height is approx. 29mm.
Case Material: Polycarbonate, Full-CNC, Bead-blasted
Plate Material: Brass, PC, Aluminum
Weight Material: Brass, bead-blasted, clear-coated
Badge Material: Brass or Anodised Aluminum, bead-blasted, clear-coated
Typing Angle: 5 degrees
Layout: ANSI. ISO (ISO in soldered-PCB only)
Case Colors: Frosted and Ink Black
Mounting style: At least 3 variations (featured below in the post)
PCB: Soldered and Hot-swap, ESD protection, VIA and QMK Compatible, PCB Screw-in Stabilizers, RGB Under-glow.


Misc.

Vendors: TBA


Shipping Time: Based on fabricator, we should be able to start shipping within 3-4 months upon completion of order, assuming that there are no delays.


Price: We aim to keep it under 430USD with a minimum order quantity (MOQ) of 100 pieces per color.

I will try to negotiate with the fabricators, and push the prices down, but the MOQ (200?) will have to be higher. If the interest is there, I just might be able to do so!


The Components Within

More
263114-7



Mounting System and Plate Design:

Now, let’s talk about this. This was the core-focus during the design and creation process of this board. I decided to go with a flex-cut (some people call it leaf-spring) design that gives users the freedom to choose their favorite mounting-style on the board. To achieve this, the cuts were meticulously-made near the edges of the plate.

Due to the plate’s unique design, it gives the user options to choose the level of stiffness/flex desired, by simply utilizing different configurations and placement of provided Poron gasket strips, silicone O-rings and M2 screws. Think: “One plate, many uses”.


263118-9
( This is the older version. Please check below for the updated version ;D )


A few examples:

Mount 1

The Plate is attached to the Top Case via M2 screws with Poron gasket strips and silicone O-Rings.



Mount 2

The Plate is sandwiched between the Cases via Poron gasket strips.



Mount 3

The Plate is attached to the Top Case via M2 screws and silicone O-rings.




More Renders

More
263126-13

263128-14

263130-15


This is just the beginning and there will be more updates to come! Stay tuned!

For any feedback, ideas, or maybe even collaboration, feel free to comment! (:

Lastly, please, do take a minute to fill up this interest-check form:
https://docs.google.com/forms/d/e/1FAIpQLSdXSoneFSZeU2XQFcIQ6az8Ma1c8x_pMKQmtrBb3ORjbhn1xw/viewform


Thank you





Update: 1st March 2021

More
Hi everyone.

I have seen the response on the google form survey. I was very pleased to see so many of them. They have been very positive. Thank you all for the support shown! There were also some feedback that were interesting. Let me address those that I can at the moment.

Case weight:
This is what's engraved onto the the case weight. For all who were asking for a close up view, here it is. This will be final, I hope you all like what you see!  :cool:




Top-right blocker (badge):

This was a surprising one. I thought Mr. Unpopular here would be taken away from the final product based on some replies from this thread. However, it seems that most were in favor of the badge, as expressed in the google form survey.

The design of the badge has not been finalised. I will be collaborating with various artists/designers to pick the best-looking ones. You can be sure that there will be alternative designs to the ones you see in the renders above. If anyone would like to run a collab, hit me up. I would love to hear from you! (Add me on discord: Nedzc27#3879)

Chances are, the badge will come in different designs and material (looking at brass and anodised aluminum). They will be showcased later on this month. Keep a lookout here for updates!


That will be all for now! More updates will be posted as soon as I can. Have a great week ahead.  :thumb:




Update: 17th March 2021

More
Hello everyone!

Hope these few weeks have been good to all. I have read every single one of your responses on the google sheets. I am very happy to see all of them. There are currently more than a 100 responses, and to be honest, this has gone beyond some of my expectations! Let's have a peek at the statistics so far:

(as of this update)

264542-17







Moving forward, a few updates. Here we go:

1. First and foremost, Protoype is on the way!
The order has been placed. I am waiting for the fabricators to complete it. As much as I am excited to have my hands on it, I also can't wait to show it to all of you!  :cool:


2. There will be a soldered-PCB version coming! The available layouts will be presented in later updates. Stay tuned!


3. Following up from the second point, there has been changes made to the plate. Additional cuts were made. The plate is now universal. It'll be in favor of multiple layouts, and soldered-pcb. This one's especially for the enthusiasts out there armed with their soldering iron.  ;)

Here's how the plate looks:

264548-20


4. Some changes were made to the initial offerings of plate materials. There will not be FR4 included this time. I apologise to those who intended to pair this board with the FR4 plate...


5. The colours available for the cases will ONLY be in Ink Black and Frosted. There were definitely some interesting colours suggested, and I have kept them in mind! (perhaps next time?)


6. Last but not least, let's talk about the badges!

There has been a major concern regarding the design of the badge. It seems quite a number did not like the smiling face. I've taken certain suggestions from the responses gathered. Thus, it shall be changed. Time for a face-lift :D

I have collected different designs and have chosen to settle with these 3.

Runes

264550-21264552-22
264556-23264554-24

These are Futhark runes. They 'spell-out' the word "LOKI".


Fenrir

264558-25264560-26
264564-27264562-28

Norse Mythology Wolf. First Son of Loki. This idea came along, to signify the first-run for the Loki65.


Helmet

264566-29264568-30
264572-31264570-32

The famous horned-helmet. Inspired by the Marvel Comics' version of Loki.


Do take a minute to help me fill this up? Vote for your favourite badge(s)! Thank you :thumb:

https://forms.gle/SExGonRPG1BGUAni8


Don’t forget to fill the IC form for the board if you haven’t already done so:

https://docs.google.com/forms/d/e/1FAIpQLSdXSoneFSZeU2XQFcIQ6az8Ma1c8x_pMKQmtrBb3ORjbhn1xw/viewform

That will be all for now. I look forward to your feedback. Have a great week ahead!




Update: 22nd March 2021

More
Hello everyone!

Just a small, but important update nonetheless;

Discord channel is up!

here is the link:
https://discord.gg/RHmR7HZK5J

See you guys there!  :cool:



Update: 24th March 2021

More
Hello everyone!

Some matters to share:

1. What you see below is a video I made quite a few weeks back.

A sample piece of Polycarbonate material was received from the fabricators as requested. I also wanted inserts to be included in the sample piece; stainless steel and brass ones. I decided to go for the heat-stacked brass inserts for the upcoming prototype in the end.

I toy-ed around with the sample piece. Here, you can see me conduct a ( not-too-scientific ) "stress-test" with it. I wanted to demonstrate how strong the material should really be. I'm confident that, with the included inserts, there will be magnificent results. You shouldn't be worried about broken screw-threads any longer.


2. Instagram Page!

here is the link:
https://www.instagram.com/loki65kb

Please, do follow the page for some exclusive updates too.  :thumb:


3. Lastly, regarding responses on the survey forms. Thank you all so much for taking the time to respond. Here are the figures so far:

265196-33

265198-34

That would be all for now!  ;D



Update: 7th May 2021

Hi all! I have not had the chance to do an update here for quite a few weeks now!

Prototype for various components are here!

I am here to share some pics that I have received from the fabricators. As of this post, DHL is shipping them to me, and I should receive by 10th May 2021.

267862-35

267864-36

267866-37

That would be all for now! Have a great week ahead! Remember to join the discord for more updates, and I want to hear your suggestions and discussions over there too!  :thumb:
« Last Edit: Thu, 06 May 2021, 15:49:06 by Nedzc27 »

Offline of_sam

  • Posts: 175
  • Location: United States
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #1 on: Fri, 26 February 2021, 10:46:04 »
Pepega

Offline pixelpusher

  • * Elevated Elder
  • Posts: 3736
  • Location: Tennessee - USA
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #2 on: Fri, 26 February 2021, 10:46:07 »
Is this a collab with GMK Cauldron/Witch?

Offline gilbert

  • Posts: 119
  • Location: Germany
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #3 on: Fri, 26 February 2021, 10:46:22 »
im in!!!

Offline Dr_D

  • Posts: 25
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #4 on: Fri, 26 February 2021, 10:47:30 »
This thread should shapeshift into an actual IC

Offline keeganzero

  • Posts: 52
  • Location: Sacramento, CA
  • huhu
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #5 on: Fri, 26 February 2021, 11:02:48 »
I'm confused, when I opened this thread it was a broken image and 'downloading 8/10'
Now it is at 5/10 and you have some text
And refreshed again and the images are gone

Might want to do some more prep before posting

Because boomers can be weebs too

Offline Kokaloo

  • Posts: 554
  • Location: Las Vegas
  • 🤘(• ω •)🤙
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #6 on: Fri, 26 February 2021, 11:06:01 »
Ya'll interest checkers need to remember you're not some important board of directors waiting for a professional presentation.
Allowing someone's technical issues get in the way of the product they're trying to present is haughty as hell.
Give the guy a few minutes; don't reply with bull**** that clogs up the thread.

Offline pixelpusher

  • * Elevated Elder
  • Posts: 3736
  • Location: Tennessee - USA
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #7 on: Fri, 26 February 2021, 11:07:45 »
Ya'll interest checkers need to remember you're not some important board of directors waiting for a professional presentation.
Allowing someone's technical issues get in the way of the product they're trying to present is haughty as hell.
Give the guy a few minutes; don't reply with bull**** that clogs up the thread.

Makes sense.

Offline keeganzero

  • Posts: 52
  • Location: Sacramento, CA
  • huhu
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #8 on: Fri, 26 February 2021, 11:08:40 »
Ya'll interest checkers need to remember you're not some important board of directors waiting for a professional presentation.
Allowing someone's technical issues get in the way of the product they're trying to present is haughty as hell.
Give the guy a few minutes; don't reply with bull**** that clogs up the thread.

There is button to the right of the Post button that will allow you to preview your message before you post it

Because boomers can be weebs too

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #9 on: Fri, 26 February 2021, 12:45:24 »
My apologies to all who may have gotten a peek at a post that was not complete! (Couldn't contain the excitement enough, and it led to a few errors that might have slipped; didn't exactly help when I missed clicking on the "preview" button as well  :( ) Thank you all for being patient! Please do take time to leave comments and feedback if necessary!

Cheers!

Offline Baka Bot

  • Posts: 121
  • Location: idk somewhere in the Western Hemisphere
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #10 on: Fri, 26 February 2021, 13:20:47 »
maybe have a simpler way of explaining the various mounting styles to make it more convenient for others to follow. Also im not too keen on hotswap as the only pcb option personally (unless i missed some info in the thread) nevertheless glwic. edit: any plans on a proto soon?
« Last Edit: Fri, 26 February 2021, 13:31:03 by Baka Bot »

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #11 on: Fri, 26 February 2021, 13:30:52 »
Is this a collab with GMK Cauldron/Witch?

nope this is not  :))

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #12 on: Fri, 26 February 2021, 13:33:06 »
This thread should shapeshift into an actual IC

it finally did! :cool:

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #13 on: Fri, 26 February 2021, 13:35:02 »
Ya'll interest checkers need to remember you're not some important board of directors waiting for a professional presentation.
Allowing someone's technical issues get in the way of the product they're trying to present is haughty as hell.
Give the guy a few minutes; don't reply with bull**** that clogs up the thread.

Thank you for the patience and understanding!  ;)

Offline Vigrith

  • Posts: 1805
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #14 on: Fri, 26 February 2021, 13:43:20 »
Ya'll interest checkers need to remember you're not some important board of directors waiting for a professional presentation.
Allowing someone's technical issues get in the way of the product they're trying to present is haughty as hell.
Give the guy a few minutes; don't reply with bull**** that clogs up the thread.

There is button to the right of the Post button that will allow you to preview your message before you post it

Not everyone has been registered for 8 years, even if he saw the preview button maybe he wasn't really aware of the etiquette here or didn't expect like 15 replies complaining about the lack of content in the OP or just being weirdos in general within 2 minutes of posting.

It happens, there's really no need to hound the guy with a bunch of useless bull**** - this is also not aimed at your response specifically, it was constructive.

PS: I like the idea! Looks like it could be feasible to see through and have it work, good luck.

Offline Gavzers

  • Posts: 9
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #15 on: Fri, 26 February 2021, 14:55:43 »
Looks pretty cool! Different mounting methods are always fun to tinker with, but I would prefer I front height of around 18mm as it is much more comfortable (although that's just my preference). Another thing to consider is maybe testing around with a daughterboard as I feel like they are always a positive addition to any board.

Offline Zanhana

  • Posts: 71
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #16 on: Fri, 26 February 2021, 15:57:39 »
interesting concept, but I'd prefer no top right blocker. a lower front height would also be nice

Offline treeleaf64

  • Posts: 1281
  • Location: California, USA
  • Hi it's me, treeleaf
    • Treeleaf's Youtube channel
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #17 on: Fri, 26 February 2021, 16:03:18 »
interesting concept, but I'd prefer no top right blocker. a lower front height would also be nice

These are the things I also agree with :)
Diamond polishing tester/service
Badwordposter on Geekhack Interest check
Gateron and Gater Ron are Treeleaf's friends

Disclaimer:
May display immature behavior
May talk in third person
Does not understand simple things (Treeleaf moment)

Offline totalemon

  • Posts: 78
  • Location: australia
  • praying for bingsu r2
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #18 on: Fri, 26 February 2021, 16:20:48 »
That weight looks pretty cool! But I agree that it would work better without the blocker

Offline Chippy

  • Posts: 201
  • Location: USA
  • sus chef
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #19 on: Fri, 26 February 2021, 16:59:54 »
I was going to meme about how 65 with top right blockers are so hot right now, but I honestly appreciate you trying to do something different with allowing different mounting styles (even if they are very similar). Looking forward to how this turns out. My one suggestion is maybe trying to make it leafspring.
This and the swiss cheese keyboard is the next generation of keyboards

Offline catamscott

  • Posts: 241
  • Location: Oregon
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #20 on: Fri, 26 February 2021, 17:03:59 »
board looks solid, and it's great that you're designing with the issues of other polycarb boards in mind. mounting looks very keycult but with the option to burger mount, which is a nice option to have. if possible, having the option to bottom mount would be cool too. i can't tell from the images, but does the outermost cut on the mounting tab (closest to the screw hole) sit within the gasket when assmbled? my thinking is that if you sandwich gasket this and that is the case, the pressure from the sandwich mounting will nullify the added leaf-spring cuts. i may be (and often am) wrong, but keycult boards look to have both leaf-spring cuts closer together, such that the outermost cut isn't resting within the mounting area. that said, that's just how it looks in build streams, i don't own one so I can't comment definitively on that though. either way, it looks pretty good. i'll also echo the recommendations to nix the top blocker, i much prefer having an extra key there.

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #21 on: Fri, 26 February 2021, 18:53:04 »
Hi everyone! It is nice to see feedback coming in. I really appreciate the time you have taken, and be assured that I do read every single one, and take them into consideration.

Perhaps I can take time to address some of the feedback that I see. ;)

Regarding the design for this board, ill try not to make too drastic of a change if possible, as there will be compromises/trade-offs made on other aspects. I will address them shortly. Some changes of course, can be made and I'm taking it into consideration (I'm looking at you Brass Badge  :( ).

Here are some of my thoughts regarding these design aspects as of now:

-height
The front height (20mm) is as low as I can go for the following few reasons. Do bear with me, it is quite a handful:

1. I've mentioned earlier that this board does not skimp on the Polycarbonate material used for the case. So it may seem a little thicker/taller than the average boards (maybe?).

2. The bottom case houses a rather hefty brass weight within. So, to cut away material of the bottom case for the sake of lowering the overall height, it means that the thickness/heftiness of the brass weight has to be compromised for it to fit in with the bottom case. I'm not willing to sacrifice some functional value for the weight just yet.  :D

3. The use of inserts for the screw-holes require the top case to be a little thicker, to maintain the integrity of the material, and being in-line with the intended case design.

4. I intentionally left sufficient space between the PCB and the bottom case, to allow for the accommodation of the hot-swap sockets, and the possibility of using a case foam, if users so desire.

-daugtherboard
I did toy around with the idea initially but have shelved it (at least for now) as i wanted to keep this board simple. The exclusion of the daugtherboard will see benefits of a lower cost. It will also allow the height of the case to be slightly lower since there is no need to make space for housing of the cables used to connect the separate pieces of PCB. But, that being said, inclusion of daughterboards will not be ruled-out in future designs  :cool:

-top right blocker
hmmmmm...

-the plate
1. Yup, this is considered a leaf-spring design already, no?
2. Yup, the gasket strips are sitting on the cuts itself. The effect of the leaf-spring cuts will not be experienced when using the configuration shown in "Mount 2"; when the plate is sandwiched between the top and bottom layers of gasket strips. This is with the intention to make the typing feel of the 'Mount 1" and "Mount 2" a little more distinctive from one another.


I've also received some interesting comments in the interest check form! I will get to them ASAP. Ill be logging off and heading to bed for now.

Thank you all once again and stay tuned for more updates. There is so much more to share with all.
« Last Edit: Fri, 26 February 2021, 19:03:30 by Nedzc27 »

Offline R4YN3

  • Posts: 22
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #22 on: Fri, 26 February 2021, 19:45:03 »
Put me down for one with the blocker

Offline Tree_

  • Posts: 259
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #23 on: Fri, 26 February 2021, 19:59:12 »
I don't know what every bodies individual idea of affordable is, but this:

430USD

Contradicts this:

4. A high-end, premium keyboard that doesn’t require you to break the bank!

Just in my opinion.

Offline KambingSuSu

  • Posts: 6
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #24 on: Fri, 26 February 2021, 20:47:36 »
Cool idea, but it seems that you spent way too much time on the renders before collecting more feedback around. Maybe time to get some protos?

Bezels look great, but those aren't thick. When you say thick bezels, think bigger. S7 elephant, the M0110, J80 series. THOSE are thick bezels.

Are your only interactions with PC injection molded?

430 USD is a decent, but not a very cheap price. The qoute is about right though, given the known failure rate for PC CNC. Best to confirm the prices beforehand.

Plate options - 3 materials, but only fixed ANSI. Does not look like there is a reason with the design of your case for the plate to only support a single layout. Would definitely help with your MOQ if you allow flexibility in the layout.

Hotswap only pcb - no thanks.

Mount 3 - Looks like the top case can use porons for mount 3 as well?

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #25 on: Sat, 27 February 2021, 09:09:43 »
Prototypes will definitely be coming soon. Am finalising certain aspects on this (PCB, possible tweaks in the plate)

Soldered PCB might end up as a thing for this, we will see!


Mount 3 - Looks like the top case can use porons for mount 3 as well?


Yes, if one wishes to use the porons for “mount 3”, it is possible too. The way to mount this board will not be limited to the above 3 examples. Say, another would like to use just 4 of the mounting tabs for the gasket strips for a “sandwich mount”, it’ll work too. There will be changes, however subtle.

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #26 on: Sun, 28 February 2021, 15:10:08 »
Updates made! Do check them out above.

Offline fredprinz21

  • Posts: 30
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #27 on: Mon, 15 March 2021, 06:00:03 »
430USD is not affordable, IMHO.

GLWIC!

I don't know what every bodies individual idea of affordable is, but this:

430USD

Contradicts this:

4. A high-end, premium keyboard that doesn’t require you to break the bank!

Just in my opinion.
For the night is dark and full of terrors.

Offline darryldh

  • Posts: 12
  • Location: CA
    • loprokb.ca
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #28 on: Tue, 16 March 2021, 08:49:49 »
looks cool! Nice work

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #29 on: Tue, 16 March 2021, 16:32:27 »
Major updates made. Do check it out! (:
« Last Edit: Wed, 17 March 2021, 12:09:49 by Nedzc27 »

Offline Nonnegaard

  • Posts: 166
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #30 on: Tue, 16 March 2021, 16:45:11 »
I ****ing love the runes. With Ink Black and GMK Norse, it'll look nothing short of insane. People will criticize you for copying the IRON165 even though you have a solid theme and they literally look nothing alike. I don't like the helmet. It gives me MCU vibes, and it doesnt fit the board.

Offline vnflynn

  • Posts: 21
  • Location: the only non-toxic Communist country
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #31 on: Tue, 16 March 2021, 20:59:34 »
After seeing the runes, I really need to get into your early bird list in some way. Third badge option is a must like I mentioned in my IC feedback. Thank you.

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #32 on: Wed, 17 March 2021, 12:12:35 »
I ****ing love the runes. With Ink Black and GMK Norse, it'll look nothing short of insane. People will criticize you for copying the IRON165 even though you have a solid theme and they literally look nothing alike. I don't like the helmet. It gives me MCU vibes, and it doesnt fit the board.

Thank you! Yeah I kinda wanna pick up a set of GMK Norse for myself as well..  ;D

After seeing the runes, I really need to get into your early bird list in some way. Third badge option is a must like I mentioned in my IC feedback. Thank you.

Early bird offers might be happening..

Offline dansemacabre

  • Posts: 4
  • Location: Bangkok Thailand
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #33 on: Mon, 22 March 2021, 05:32:52 »
Definitely looking forward to this Black PC version  :cool:
Keep up the good work!

Offline islam_taha

  • Posts: 2
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #34 on: Mon, 22 March 2021, 08:44:49 »
Definitely in!!, any rough estimate for the GB Q2/Q3, late May, late April, anything :D

Offline Findecanor

  • Posts: 4757
  • Location: Koriko
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #35 on: Mon, 22 March 2021, 09:01:03 »
Misleading slogan is annoying.
Man must shape his tools lest they shape him
-- Arthur Miller

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #36 on: Mon, 22 March 2021, 11:53:13 »
Definitely looking forward to this Black PC version  :cool:
Keep up the good work!

Thank you!

Definitely in!!, any rough estimate for the GB Q2/Q3, late May, late April, anything :D

Group buy will not be happening in Q2. Im looking at Q3 mid-end.

Protoype is arriving in about 4 weeks. Thereafter, sound tests, feel tests. And once all is good, prototype units will be sent to streamers for some promotion  ;D

Group buy happens right after that.  ;)



Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #37 on: Mon, 22 March 2021, 11:54:26 »
Misleading slogan is annoying.

Sorry, it will never be my intention to mislead. May I know what is this with regards to?

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #38 on: Mon, 22 March 2021, 12:20:11 »
updated!

Discord channel is up:
https://discord.gg/RHmR7HZK5J

See you there!

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #39 on: Wed, 24 March 2021, 12:12:22 »
Updates made! Please, do read them, above :thumb:

Instagram page is up too:

https://www.instagram.com/loki65kb

« Last Edit: Thu, 25 March 2021, 16:27:13 by Nedzc27 »

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Board that Shapeshifts
« Reply #40 on: Thu, 01 April 2021, 13:57:04 »
Wanted to share something interesting!

Im sure some here are familiar with Blacksimon, he posts and streams stuff on mechanical keyboards on YouTube and Twitch.

So, apparently there was some coverage on the Loki65 awhile back, I only managed to learn about it recently.

Of course, I had my own take on his comments about the board. Check out the clip, his comments, and mine:


Enjoy!  ;D



Original footage here:

https://www.twitch.tv/videos/931778045?t=4899s


Simon’s awesome. Check out some of his stuff on Twitch. He makes awesome content and keeps things real.

Blacksimon’s Twitch channel:

https://twitch.tv/blacksimon

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Shapeshifting Board (multiple mounting options)
« Reply #41 on: Thu, 22 April 2021, 13:50:22 »
There has been some updates made! Do check it out :)

Offline Nedzc27

  • Thread Starter
  • Posts: 19
Re: [IC] Loki65, The Shapeshifting Board (multiple mounting options)
« Reply #42 on: Thu, 06 May 2021, 15:50:35 »
The prototype for the case and various components are being shipped over right now! Some pics in the updated post above (: