Author Topic: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [R2 soon!]  (Read 56330 times)

0 Members and 1 Guest are viewing this topic.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
[GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [R2 soon!]
« on: Mon, 26 October 2020, 11:15:39 »


It’s happening

Pizza65 and PizzaPCB Group Buy is here!
Response has been massive and we really want to thank you all for the support showed.
Group Buy will be hosted on our own platform starting from Monday 26 at 18:00 GMT and will end the 26 November. All the infos are on the website, www.keyboards.pizza

Here is a summary

About the case:

Seamless, minimalistic design
Top Mount, made of high quality and precisely machined anodized aluminum
7 degrees angle
Plate options
  • 1,5mm aluminum plate (ANSI only)
  • 1,5mm shiny brass plate (ANSI and ISO)
Supports for double backspace and stepped capslock
Supports most of 65% PCBs






About the PCB:
  • HASL-Lead free finish in matte black
  • ESD Protection
  • Overcurrent and Overvoltage protection
  • Powerful STM32 F0 Microcontroller
  • QMK and VIA compatibility
  • Custom front silkscreen





Available colours:
  • Graphite Black
  • Gentiana Blue
  • Pearl Ruby Red




Pricing
All kits comes with a plate, rubberpads, stickers. Brass is available in both ISO and ANSI layouts

Pizza65 Aluminum Kit is 209.99 €
Pizza65 Brass Kit is 244.99 €
Pizza65 + PizzaPCB Aluminum kit is 249.99 €
Pizza65 + PizzaPCB Brass Kit is 284.99 €
PizzaPCB also comes standalone at 49.99 €
« Last Edit: Wed, 22 September 2021, 14:57:44 by PizzaKeyboards »

Offline fedemito

  • Posts: 88
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #1 on: Wed, 28 October 2020, 06:39:14 »
Nice, good luck!



Offline Ponizu

  • Posts: 6
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #2 on: Wed, 28 October 2020, 08:07:59 »
Nice one! Good luck guys!

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards

Offline E-ant

  • Posts: 9
  • Location: Estonia
  • ISO
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #4 on: Wed, 28 October 2020, 09:43:59 »
In for the blue.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #5 on: Wed, 28 October 2020, 18:38:05 »
We are happy to announce that thanks to the enormous support you are giving us we have been able to find an agreement with our Shipping companies that will allow you to have less expensive shipments for our Pizza pcb all over the world.
So from now on if you are only interested in our pcb you will save a lot (Same with the Stickers or Standalone Plate)  ;D

Offline treeleaf64

  • Posts: 1836
  • Location: United State
  • Traveler
    • treeleaf64
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #6 on: Wed, 28 October 2020, 20:16:03 »
Insane price, would buy this if I liked nonsplit layout Hahaha
treeleaf64: https://discord.gg/rbUjtsRG6P

This is the cat and pat!!!!!!!!

Offline Skandiluz

  • Posts: 14
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #7 on: Wed, 28 October 2020, 21:14:01 »
I already ordered the blue but man...the more I look at that red the more I'm thinking I should buy that as well.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #8 on: Thu, 29 October 2020, 02:54:12 »
I already ordered the blue but man...the more I look at that red the more I'm thinking I should buy that as well.
We have already ordered a Red prototype, we are waiting for it to arrive to post detailed photos  :thumb:

Offline Dreenok

  • Posts: 6
  • Location: FR
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #9 on: Thu, 29 October 2020, 04:07:44 »
Insane price, would buy this if I liked nonsplit layout Hahaha
Non split layout ? As seen on the IC both layout supports split backspace and stepped capslock

https://geekhack.org/index.php?topic=108537.msg2972346#msg2972346



--
Dreenok

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #10 on: Thu, 29 October 2020, 04:43:35 »
Insane price, would buy this if I liked nonsplit layout Hahaha
Non split layout ? As seen on the IC both layout supports split backspace and stepped capslock

https://geekhack.org/index.php?topic=108537.msg2972346#msg2972346
Yes, as you can see from the images, our plates and pcb support double backspace and stepped capslock both in the ISO and ANSI version  ;D

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #11 on: Thu, 29 October 2020, 11:40:25 »
We have added two more photos to the first post to show you the finish of our Shiny Brass Plate, hope you like it!

Offline Skandiluz

  • Posts: 14
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #12 on: Thu, 29 October 2020, 12:43:41 »
I already ordered the blue but man...the more I look at that red the more I'm thinking I should buy that as well.
We have already ordered a Red prototype, we are waiting for it to arrive to post detailed photos  :thumb:

Oh no! Don’t do this to me! I can’t tell my wife I need yet another keyboard haha. But I mean... I could always use a red keyboard, right?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #13 on: Thu, 29 October 2020, 14:47:08 »
I already ordered the blue but man...the more I look at that red the more I'm thinking I should buy that as well.
We have already ordered a Red prototype, we are waiting for it to arrive to post detailed photos  :thumb:

Oh no! Don’t do this to me! I can’t tell my wife I need yet another keyboard haha. But I mean... I could always use a red keyboard, right?
You could tell your wife that you just bought a Pizza   :rolleyes: ;D

Offline DuellM

  • Posts: 321
  • Location: Brooklyn
  • Keyboard Fatty
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #14 on: Fri, 30 October 2020, 00:15:47 »
Hi, does anyone know if this will work with a CannonKeys Instant65 PCB?  :-*

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #15 on: Fri, 30 October 2020, 02:36:19 »
Hi, does anyone know if this will work with a CannonKeys Instant65 PCB?  :-*
Hi looking at the pcb documentation I can tell you that it supports the same layout as ours and has the usb port on the left, so it is very likely that it is compatible!  ;D

Offline DuellM

  • Posts: 321
  • Location: Brooklyn
  • Keyboard Fatty
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #16 on: Fri, 30 October 2020, 09:37:25 »
Hi, does anyone know if this will work with a CannonKeys Instant65 PCB?  :-*
Hi looking at the pcb documentation I can tell you that it supports the same layout as ours and has the usb port on the left, so it is very likely that it is compatible!  ;D
Ok Cool  ^-^

Offline ireverliat

  • Posts: 16
  • Location: Spain
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #17 on: Fri, 30 October 2020, 15:04:31 »
In for the Red one!  :cool:

Offline Chaselicious17

  • Posts: 100
  • Location: Dallas, Tx
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #18 on: Fri, 30 October 2020, 18:13:19 »
In for the Red one!  :cool:
Same! Now we wait...

Offline ainet

  • Posts: 17
  • Location: France
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #19 on: Sat, 31 October 2020, 19:21:55 »
Im sorry that the green didn’t make it, blue looks fantastic btw

Offline h3lli0n

  • Posts: 28
  • Location: France
    • oliversphotoblog.com
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #20 on: Sun, 01 November 2020, 04:26:17 »
Hi, do you have a discord server ?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #21 on: Sun, 01 November 2020, 04:59:32 »
Hi, do you have a discord server ?
Hi, yes, here is the invitation link: https://discord.gg/p6CEYThb
But the best way to ask us something and get the answer immediately is to contact us on instagram!  ;D

Offline ywcsam

  • Posts: 49
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #22 on: Sun, 01 November 2020, 20:59:57 »
I feel like "Made in Italy" holds a value for this keyboard and should be engraved at the back somewhere

Offline googley

  • Posts: 2
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #23 on: Mon, 02 November 2020, 21:58:53 »
are there any sample photos of the red?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #24 on: Tue, 03 November 2020, 02:20:56 »
are there any sample photos of the red?
We are waiting for the last red prototype to arrive.
Once arrived we will post the photos both here and on instagram :thumb:

Offline googley

  • Posts: 2
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #25 on: Tue, 03 November 2020, 06:15:04 »
Cool, will keep an eye out on insta  ^-^

Offline idealape

  • Posts: 71
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #26 on: Tue, 03 November 2020, 11:08:07 »
this looks like a really fun keeb.
was considering getting the PCB it for a custom case i want to make from an unusal material.... but the blocker, it just wont work I think.
good luck with the GB!

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #27 on: Tue, 03 November 2020, 14:25:02 »
this looks like a really fun keeb.
was considering getting the PCB it for a custom case i want to make from an unusal material.... but the blocker, it just wont work I think.
good luck with the GB!
Thank you! In case you succeed, don't forget to send us the photos!  ;D

Offline cpt-nic

  • Posts: 23
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #28 on: Wed, 04 November 2020, 04:42:24 »
And some PCB question again:
You stated that matching (and tested) PCBs are the kbd67 rev 2 and the cannonkeys instant65 and that they share the same footprint. These two boards seem to have the usb port more recessed than what is shown for your PCB. Yours looks more similar to the kbd67 mkii pcb.
I'm trying to find out if your PCB might fit in a kbd67mkii where according to kbdfans a kbd67 rev2 or dz65 does not fit - and I think that is because the USB port needs to be more exposed.
Any thoughts on that point?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #29 on: Wed, 04 November 2020, 05:00:32 »
And some PCB question again:
You stated that matching (and tested) PCBs are the kbd67 rev 2 and the cannonkeys instant65 and that they share the same footprint. These two boards seem to have the usb port more recessed than what is shown for your PCB. Yours looks more similar to the kbd67 mkii pcb.
I'm trying to find out if your PCB might fit in a kbd67mkii where according to kbdfans a kbd67 rev2 or dz65 does not fit - and I think that is because the USB port needs to be more exposed.
Any thoughts on that point?
No problem, we are happy to answer everyone.
We made the USB hole on the back of the Pizza65 slightly larger, allowing the majority of cables to pass through so we could mantain compatibility with most PCBs possibles, like the KBD67s that we tested and probably the Instant65, since it have the same layout  :thumb:

Offline posph

  • Posts: 15
  • Location: US
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #30 on: Thu, 05 November 2020, 12:26:01 »
I’m still fighting between the blue and the red!
I don’t know if u already said that but will there be a typing test with the brass plate?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #31 on: Thu, 05 November 2020, 14:33:57 »
I’m still fighting between the blue and the red!
I don’t know if u already said that but will there be a typing test with the brass plate?
Of course we will do it!
Stay tuned!  ;D

Offline MS85

  • Posts: 30
  • Location: Italy
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #32 on: Sat, 07 November 2020, 05:25:47 »
Aaaaaaaand I'm in for a blue :-)

Buona cottura.



Offline NorrittMTG

  • * Vendor
  • Posts: 45
  • Location: London UK
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #33 on: Sun, 08 November 2020, 14:00:15 »
I'm in for a blue :)
Will be doing an unusual build with the LFKeyboards SMK65 PCB and SMK 2nd Gen monterey switches.
Looking forward to getting the plate file through so i can work on some CF and FR4 plates.
Might have to do a KBD67 MKII PCB half plate flex build too!

exciting GB

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #34 on: Sun, 08 November 2020, 15:06:07 »
I'm in for a blue :)
Will be doing an unusual build with the LFKeyboards SMK65 PCB and SMK 2nd Gen monterey switches.
Looking forward to getting the plate file through so i can work on some CF and FR4 plates.
Might have to do a KBD67 MKII PCB half plate flex build too!

exciting GB
Thank you very much we can't wait to see the result!  ;D

Offline king95

  • Posts: 4
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #35 on: Tue, 10 November 2020, 12:30:54 »
I love the pizza idea, and im waiting for the brass typing test  :D
« Last Edit: Tue, 10 November 2020, 12:34:06 by king95 »

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #36 on: Thu, 12 November 2020, 09:01:08 »
Here is the Pizza65 typing test with our shiny brass plate!
Do you like it?  ;D


Offline Bamboo238

  • Posts: 49
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #37 on: Fri, 13 November 2020, 03:03:49 »
This looks great, if I were not waiting on something quite similar I would have definitely hopped on board!

Offline sup3r170va

  • Posts: 276
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #38 on: Fri, 13 November 2020, 17:47:27 »
What is the weight of the board? Thanks.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #39 on: Sat, 14 November 2020, 03:28:19 »
What is the weight of the board? Thanks.
The weight of the keeb is ~ 1.5 kg for the aluminum kit and ~ 1.7 kg for the brass kit

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #40 on: Mon, 16 November 2020, 13:55:10 »
We received tons of requests for an hot-swap version of our PizzaPCB, and while this can’t happen this time we decided to test Mill Max sockets. As expected both 0305 and 7305 variants works great with our Pizza65 and can be a solid choice for converting our solderable PCB in an hot swap one  ;D

Offline acaban

  • Posts: 29
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #41 on: Wed, 18 November 2020, 09:28:46 »
regarding the mounting method, does it support / have you tried small oring between the plate and case? does that makes sense to transmit less vibration to the case and change the sound of typing?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #42 on: Wed, 18 November 2020, 11:46:51 »
regarding the mounting method, does it support / have you tried small oring between the plate and case? does that makes sense to transmit less vibration to the case and change the sound of typing?
Yes we tried to put some orings between the plate and the case, and it slightly improves the already excellent feeling and sound of our Pizza65  ;D

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #43 on: Thu, 19 November 2020, 09:01:25 »
Pizza65 Preorders are ending in a week, the 26 november at 18:00 GMT
To celebrate our successful GB we are giving to a lucky winner a Pizza65 Aluminum Kit + PizzaPCB, completely for free!
Just complete this easy steps:
Plus, if you already placed an order, send us a mail at info@keyboards.pizza using the subject “giveaway” with your order number, name and Instagram username to get an extra entry, doubling your chances to win!
Giveaway ends this Sunday at 18:00 GMT.
Winner will be randomly extracted on Monday and will choose the color he prefers.
Good Luck!

Offline ihatehumans

  • Posts: 2
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #44 on: Sat, 21 November 2020, 23:42:33 »
Hey so I want to use this board for a build but I wanna use hotswap. I believe you said the Instant65 and kb67 pcbs both work but I want to confirm. Also, screw in stabs work for this right? Im assuming they do but im making sure so I don't seem like an idiot.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #45 on: Sun, 22 November 2020, 04:56:58 »
Hey so I want to use this board for a build but I wanna use hotswap. I believe you said the Instant65 and kb67 pcbs both work but I want to confirm. Also, screw in stabs work for this right? Im assuming they do but im making sure so I don't seem like an idiot.
Yes, both the pcb you have mentioned are compatible with our Pizza65, same thing for the screw in stabs  ;D

Offline ponchofreedo

  • Posts: 42
  • Location: CT
    • it me
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #46 on: Mon, 23 November 2020, 19:32:23 »
also curious about the tolerance on the top mount. would you have enough space to burger mount with some o-ring gaskets between screw/plate and plate/top case?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #47 on: Tue, 24 November 2020, 04:12:57 »
also curious about the tolerance on the top mount. would you have enough space to burger mount with some o-ring gaskets between screw/plate and plate/top case?
It depends on how thick the orings are, from the plate to the bottom of the case there is 1 mm where the screw head is located, you can try to add 2 orings but I don't think you will have any further improvements compared to putting only 1  :thumb:

Offline h3lli0n

  • Posts: 28
  • Location: France
    • oliversphotoblog.com
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #48 on: Thu, 26 November 2020, 02:57:55 »
Hello,

I've seen your packaging prototype on IG (my insta is oliversphotoblog) and I've some thoughts on it :
- In the inside of the top part you could add en engraving in black (bold and normal) italic with italian font such as "Mechanical typing since 2020" sitting on some switches and keycaps sketchs
- I would replace the pizza picture with a dualchrome red and green sketch of a pizza

What do you think ?

Have you managed to build the via firmware for the pcb?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 147
  • Location: Italia
    • Pizza Keyboards
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #49 on: Thu, 26 November 2020, 06:36:39 »
Hello,

I've seen your packaging prototype on IG (my insta is oliversphotoblog) and I've some thoughts on it :
- In the inside of the top part you could add en engraving in black (bold and normal) italic with italian font such as "Mechanical typing since 2020" sitting on some switches and keycaps sketchs
- I would replace the pizza picture with a dualchrome red and green sketch of a pizza

What do you think ?

Have you managed to build the via firmware for the pcb?
Hello, thank you for your suggestions but there will be nothing printed inside the box, this is because we want every single component of the Pizza65 to be protected to the maximum so we have decided to cover everything with foam.
Of course we will post all the progress we are making  ;D
For the Via software we are working on it, It will obviously be released before the keyboard arrives