I'm having trouble differentiating between the Concave and Convex weights from the pictures - would you be able to show a comparison picture? Appreciated
Hi, just before i get in, I have a question. I think i saw on reddit that the feet are removable, or something like that, can you detail me a bit more on that? How the feet can be removed, how does the feet look detached to the case, etc. Thank you very much. I''ll get in this GB anyway, but wanted to get some more info :D
So sad I missed this, are there any extras?
Any update on production or anything? Is there a Discord channel or something else to follow the project?
Ne updates for production progress?
Artemie
any updates?
any updates?
I received an email update on 28th August saying that there is a 2-month delay in production, largely because of CNC difficulties it seems, and with a link to this video (https://www.youtube.com/watch?v=LjvIdS54awA).
Any updates?
P.S. Still looking to purchase a spot.
Hi, any updates?
Hi everyone, hope you all have a great Thanksgiving.
I just received a new update from Break Wood yesterday. Here's the details:
+ All the base will be done tomorrow or the day after.
+ Gold plating the brass is the hard part. They have sent requests to 4-5 factories in the South Vietnam, same in the North, to get the samples. As of far, Break Wood haven't received good samples to begin mass production. Each time they sent a request, it takes half a month to get a sample back. That's why there's delays.
+ They are still working on getting the weights gold plated. I didn't receive the estimated time, but Break Wood said they would get it done as fast as possible.
If you have any questions, please let me know. I know you are worried about the GB, but I'm sure Break Wood is hard at work to get it done. Financial wise, they have spent more than double the total they received from the GB. I hope you understand.
Regards,
u/lamg4.
Hi there :)
Just saw the last update on e-mail. Not wanting to flame or anything, but when I read updates through email I feel a bit too alone with my feelings and don't know how people in general are reacting to things. This is also my first GB out of a bigger company like MD, Kbdfans, etc.
So... How are you guys? What are your thoughts?
My thoughts on it are that it’s disappointing but they are clearly in a tough spot and want to do the best they can to rectify. I’m pretty certain this isn’t a money grabbing exercise, it’s just poor planning. I’ll be paying the extra $40 personally as I think it’s worth it - especially after the wait so far.
$331usd in :'(
hoping the finished product is well worth the wait & price.
$331usd in :'(
hoping the finished product is well worth the wait & price.
So did people receive their shipping notification after paying the extra fee?
Received my board... not impressed but having the product is something I guess. Pictures in a bit.
Sent from my iPhone using Tapatalk
Pics of my board: https://imgur.com/a/yjHpR9F
Pics of my board: https://imgur.com/a/yjHpR9F
Nice pics, can you post some of the bottom of the case as well? :D
Here is the requested sound test guys:
Please excuse the hand positioning and the low quality, that was filmed with my DSLR but I have no external mic - SPOILER ALERT: it sounds nice!
Here is the back of the case (you can see my temporary solution to make the case a little higher):Show Image(https://i.imgur.com/RWSfJlj.jpg)
Just got my board today. Need to clean with damp cloth and old toothbrush around the carving area.
I am a fussy guy when comes to asthetic, but this casing looks pretty alright to me. Price is not cheap and delivery has been delayed multiple time but that is ok. Overall, I will give a 8.5/10 for the final product.
Now a bit regret not getting the extra brass weight...
I got a convex weight (a mistake IMHO), no plate to hold it in place, basic package.
I got a convex weight (a mistake IMHO), no plate to hold it in place, basic package.
Hi, forgot to ask before. Why do you think the convex weight was a mistake? Want do you meant with the "no plate to hold it in place"?
I got a convex weight (a mistake IMHO), no plate to hold it in place, basic package.
Hi, forgot to ask before. Why do you think the convex weight was a mistake? Want do you meant with the "no plate to hold it in place"?
I think he attached the stand too close to the outside edge of the case. We really missed it when we did not recommend the distance of the base, the bad thing was that Jon didn't try before he fixed the screw.
(Attachment Link) (Attachment Link) (Attachment Link)
Received my board yesterday. Without having assembled it yet, I am unimpressed.
The good:
- The carving is intricate and I think it looks quite good. I plan to brush off any excess sawdust and apply some mineral oil.
The not so good:
- The external packaging was sufficient, but the internal packaging was severely lacking. The weight was loose inside the case and able to move freely. Three of the PCB standoffs were broken off, presumably from being repeatedly struck by the brass weight as it shifted around during transit. I should be able to superglue them back in place, but it was disheartening to see that upon opening the box.
- I believe I should have ordered the additional brass weight. It was listed as optional, but it appears to be required to hold the circular weight in place. As is, the weight simply sits in the cutout and is held in place by friction. When I flip the case upside down to admire the weight, it gets dislodged rather easily. Looking at the photo album with hindsight, I believe I could have inferred this from the photos. Given that there are four additional screw holes (not shown in photos of the prototype) around the cutout for the weight, I may be able to jury rig a system to secure the weight to the case. Consequently, I think the design of the product is rather lacking in this regard.
Overall, with some work, I believe I will be able to complete a build that I am happy with. I think this is a great product, but the execution was a bit lacking.
I suggest sending some e-mails. I've been getting pretty fast emails back regarding some feedback and stuff.
From who? I haven't received anything back in weeks.
I got a response saying that they might have missed shipping the second batch before chinese new years shutdown so we likely have to another few weeks, maybe even a month to the time to get it to your door.
Hi. This GB is divided into 3 times instead of 2 times as expected, those who receive the first batch of products have a positive feedback on the product. We are happy about that, but there are still some minor errors. So we will revise the design (specifically the copper weight), some final recipients will receive new updates. ours
The not so good:
- I believe I should have ordered the additional brass weight. It was listed as optional, but it appears to be required to hold the circular weight in place. As is, the weight simply sits in the cutout and is held in place by friction. When I flip the case upside down to admire the weight, it gets dislodged rather easily.
Overall, with some work, I believe I will be able to complete a build that I am happy with. I think this is a great product, but the execution was a bit lacking.
I received mine and the weight stays in place when flipping the board.
How/where are the feet supposed to be attached?
Well mine came in, but it's not to spec. The recessed area where the pcb is supposed to sit is too small so all the keys on the bottom row scrape against the case and get stuck.
Was excited to have mine built then had to abort midway:
- The screws are rather weak, I ended up with 2 stripped screws.
- Some of the PCB standoffs do not fit any screws.
- Is this case supposed to have no screw holes for the feet and users have to drill themselves?
Also has anyone builts theirs with DZ60 PCB? My DZ60s screw holes are not aligned with the standoffs.
Bottom line, better quality control would have been very appreciated!