Author Topic: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9  (Read 76263 times)

0 Members and 1 Guest are viewing this topic.

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #50 on: Thu, 21 June 2018, 17:21:48 »
Thanks, i wonder if there is a pic of the top with out the caps although my hopes for a plate are getting slimmer  :'(
I will have a extra polycarb TKL plate by the time this arrives, hoping that will will work with this work of art.

It will not, putting aside that you'd have to cut off the mounting points of the plate, the spacing on the F row and navcluster is different from what other TKLs use.
Rats, thanks for the information  :)
« Last Edit: Thu, 21 June 2018, 17:24:11 by JubJubCity »

Offline shower_king

  • Thread Starter
  • Posts: 524
  • Location: Shang Hai. China.
  • Pain is weakness leaving your body
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #51 on: Thu, 21 June 2018, 22:12:10 »
I also edited my response due to the public nature of the form. Please fix.

What's the programmability of the PCB? QMK would be ideal. I'll even settle for Bootmapper.
Bootmapper

Offline shower_king

  • Thread Starter
  • Posts: 524
  • Location: Shang Hai. China.
  • Pain is weakness leaving your body
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #52 on: Thu, 21 June 2018, 22:19:33 »
2018/6/22
1.
The designer will offer a cord for 80% JER and a cord for 20% respectively FOR FREE.
I will note that for you who have ordered cords before as free.
If you want extra cord, PM me to confirm that.
2.
Currently ,there are only 3 slots left now. The GB will come to an end when reaching 40 sets 80% JER.
The pad is not limited
3.
I will sent paypal invoice soon. thank you for all your attention.
« Last Edit: Thu, 21 June 2018, 22:22:41 by shower_king »

Offline neralo

  • Posts: 178
  • Location: Singapore
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #53 on: Thu, 21 June 2018, 22:38:39 »
2018/6/22
1.
The designer will offer a cord for 80% JER and a cord for 20% respectively FOR FREE.
I will note that for you who have ordered cords before as free.
If you want extra cord, PM me to confirm that.
2.
Currently ,there are only 3 slots left now. The GB will come to an end when reaching 40 sets 80% JER.
The pad is not limited
3.
I will sent paypal invoice soon. thank you for all your attention.

good news all around!
HHKB Pro 2 55g | TGR 910 55g Vintage Blacks | Apple Standard M0116 Orange Alps | Rosewill RK9000 Cherry MX Blues | Diverge TM 2 WKLears

Offline mkarlsson

  • Posts: 338
  • Location: Spain
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #54 on: Fri, 22 June 2018, 04:23:10 »
I saw ISO is supported but haven’t seen a pic that has the split left shift, is that supported?

I don't know, but since it's just PCB mount 99% assuming it will

Thanks! But would like to be 100% sure it does, not a cheap board...

Can OP confirm?

Got a PM from shower_king and seems that full EU ISO is supported, with its left split shift.

Joined in!

Offline alienman82

  • * Elevated Elder
  • Posts: 4051
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #55 on: Fri, 22 June 2018, 16:56:35 »
removed.
« Last Edit: Mon, 25 June 2018, 18:12:17 by alienman82 »

Offline pvd

  • Posts: 81
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #56 on: Fri, 22 June 2018, 17:57:57 »
Submitted. Wonder if I made it in time   :p

Offline manofinterests

  • Posts: 106
  • Location: California - USA
    • Manofinterests Youtube
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #57 on: Sat, 23 June 2018, 03:46:49 »
I hope I made it  ;D

Offline foxmancore

  • Posts: 77
  • Location: Tokyo
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #58 on: Sat, 23 June 2018, 03:53:22 »
wish this had a plate instead of only pcb mount

Offline mkarlsson

  • Posts: 338
  • Location: Spain
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #59 on: Sat, 23 June 2018, 05:24:59 »
wish this had a plate instead of only pcb mount

That would break the typing feel the OP wants to achieve.


Enviado desde mi iPhone utilizando Tapatalk

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #60 on: Sat, 23 June 2018, 10:29:01 »
wish this had a plate instead of only pcb mount
Yeah I as well but as least this will force me to get into switch modding to change the housing of the switch I want to use.  :thumb:

Offline dcandic

  • Posts: 2
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #61 on: Mon, 25 June 2018, 02:37:48 »
Please send me an invoice.

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #62 on: Mon, 25 June 2018, 12:30:15 »
Invoice paid

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #63 on: Mon, 25 June 2018, 12:50:20 »
Will there be a spreadsheet for GB participants?

Offline mkarlsson

  • Posts: 338
  • Location: Spain
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #64 on: Mon, 25 June 2018, 12:56:44 »
Are all the invoices sent out? Hope not cause I think I filled the form on time...

Offline blighty

  • Posts: 403
  • Location: New York, USA
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #65 on: Mon, 25 June 2018, 12:58:58 »
My invoice was #13, if that helps any. 
LZ ergo (MX silent red) | JER - A06 (MX silent black-red springs) | Duck Lightsaver V2 (MX red) | Duck Octagon V2 (gateron clear) (lifted pads) | Duck Orion V2 (gateron red) | TKC 1800 (gateron silent reds) | Mistel MD770 (MX red with GMK silencing clips) | Realforce R2TSLA-US4-IV | Realforce R2TLSA-US4-BK | TX 75 (gateron clear) | KBDFANS 75 ("vintage" MX blues) | Kinesis Freestyle Pro (MX red) | MS Surface Ergonomic | MS Natural Ergonomic Keyboard 4000 | Filco Majestouch 2 TKL (MX black) | Phantom (Filco case) ("vintage" MX blacks | Spr1t 75% PCB x 2 (MX black and gateron clear) | Cherry G80-1865 (MX browns with black springs)

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #66 on: Mon, 25 June 2018, 13:33:11 »
I'm more than certain I submitted the form quite early. It'd be great to hear an update from shower_king to see who made the cut. I wonder if there's a possibility that editing my response may have simply voided it.

Offline MajorKoos

  • Posts: 851
  • Location: Bay Area
  • 1 life please. Extra large.
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #67 on: Mon, 25 June 2018, 13:44:38 »
Sigh.
I'd promised myself no more keyboards (except the Heavy6, LZ SE MP, Keycult #1 and VE.A 2) and then this cropped up.

Offline neralo

  • Posts: 178
  • Location: Singapore
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #68 on: Mon, 25 June 2018, 13:48:52 »
And invoice paid! Can’t wait for this baby.


Sent from my iPhone using Tapatalk
HHKB Pro 2 55g | TGR 910 55g Vintage Blacks | Apple Standard M0116 Orange Alps | Rosewill RK9000 Cherry MX Blues | Diverge TM 2 WKLears

Offline blighty

  • Posts: 403
  • Location: New York, USA
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #69 on: Mon, 25 June 2018, 14:42:52 »
I'm more than certain I submitted the form quite early. It'd be great to hear an update from shower_king to see who made the cut. I wonder if there's a possibility that editing my response may have simply voided it.

It looked like I dropped a few positions when I edited my response, at least when the analytics were still visible.
LZ ergo (MX silent red) | JER - A06 (MX silent black-red springs) | Duck Lightsaver V2 (MX red) | Duck Octagon V2 (gateron clear) (lifted pads) | Duck Orion V2 (gateron red) | TKC 1800 (gateron silent reds) | Mistel MD770 (MX red with GMK silencing clips) | Realforce R2TSLA-US4-IV | Realforce R2TLSA-US4-BK | TX 75 (gateron clear) | KBDFANS 75 ("vintage" MX blues) | Kinesis Freestyle Pro (MX red) | MS Surface Ergonomic | MS Natural Ergonomic Keyboard 4000 | Filco Majestouch 2 TKL (MX black) | Phantom (Filco case) ("vintage" MX blacks | Spr1t 75% PCB x 2 (MX black and gateron clear) | Cherry G80-1865 (MX browns with black springs)

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #70 on: Mon, 25 June 2018, 14:57:45 »
I hope the we can choose whether or not the cable can be coiled.   :cool:

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #71 on: Mon, 25 June 2018, 15:08:03 »
I'm more than certain I submitted the form quite early. It'd be great to hear an update from shower_king to see who made the cut. I wonder if there's a possibility that editing my response may have simply voided it.

It looked like I dropped a few positions when I edited my response, at least when the analytics were still visible.

:( That makes me think that maybe I lost a spot...

Offline ___q

  • Posts: 248
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #72 on: Mon, 25 June 2018, 15:09:35 »
I also have not received an invoice yet, hopefully/probably they just haven't all been sent out yet.

FWIW I was the first or second person to fill out the form but made some edits after discussion with shower_king that he confirmed.

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #73 on: Mon, 25 June 2018, 15:37:40 »
I also have not received an invoice yet, hopefully/probably they just haven't all been sent out yet.

FWIW I was the first or second person to fill out the form but made some edits after discussion with shower_king that he confirmed.

Yeah. I filled it in as soon as the post appeared, but I edited it when I saw that the responses were public. I then edited a second time once shower_king confirmed that the form analytics were closed from public view. I know that any edits do update the timestamps that are loaded onto the Google Sheets spreadsheet.

Offline pvd

  • Posts: 81
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #74 on: Mon, 25 June 2018, 15:42:04 »
No invoice,  :confused: . I submitted when the last post said there were only a few spots left, so I probably just missed the cutoff.

Offline mkarlsson

  • Posts: 338
  • Location: Spain
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #75 on: Mon, 25 June 2018, 16:06:08 »
I did not edit and joined before the comment of the few spots, no invoice yet...

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #76 on: Mon, 25 June 2018, 16:07:02 »
editing the form doesn't move your spot on the list

we had this discussion after TGR alice
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline manofinterests

  • Posts: 106
  • Location: California - USA
    • Manofinterests Youtube
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #77 on: Tue, 26 June 2018, 12:57:23 »
If we haven't received an invoice at this point is it safe to assume we didn't make it?  :(

Offline TerryMathews

  • Posts: 536
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #78 on: Tue, 26 June 2018, 13:40:33 »
If we haven't received an invoice at this point is it safe to assume we didn't make it?  :(

I haven't received an invoice yet and I ordered pretty darn early.

Offline blighty

  • Posts: 403
  • Location: New York, USA
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #79 on: Tue, 26 June 2018, 16:12:01 »
Did the people who haven't been invoiced order only the 80%?  I'm not sure if it makes a difference, but I was invoiced for the 80% and the 20%.  Hopefully shower_king will be awake in a few hours and can respond to everyone's questions (it should be around 05:10 in the morning in China right now).
LZ ergo (MX silent red) | JER - A06 (MX silent black-red springs) | Duck Lightsaver V2 (MX red) | Duck Octagon V2 (gateron clear) (lifted pads) | Duck Orion V2 (gateron red) | TKC 1800 (gateron silent reds) | Mistel MD770 (MX red with GMK silencing clips) | Realforce R2TSLA-US4-IV | Realforce R2TLSA-US4-BK | TX 75 (gateron clear) | KBDFANS 75 ("vintage" MX blues) | Kinesis Freestyle Pro (MX red) | MS Surface Ergonomic | MS Natural Ergonomic Keyboard 4000 | Filco Majestouch 2 TKL (MX black) | Phantom (Filco case) ("vintage" MX blacks | Spr1t 75% PCB x 2 (MX black and gateron clear) | Cherry G80-1865 (MX browns with black springs)

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #80 on: Tue, 26 June 2018, 16:52:43 »
Did the people who haven't been invoiced order only the 80%?  I'm not sure if it makes a difference, but I was invoiced for the 80% and the 20%.  Hopefully shower_king will be awake in a few hours and can respond to everyone's questions (it should be around 05:10 in the morning in China right now).
I got invoiced and I only ordered the 80%

Offline dantambok

  • Posts: 963
  • Location: Goutland
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #81 on: Tue, 26 June 2018, 18:58:21 »
Paid for my invoice. Also, PMed to change the color of my case please  :p
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 /  Quantrik Hachi /  Quantrik  Kyuu / Duck Orion V2 / TGRxSinga Unikorn R1 / 2x Unikorn 2.2 / Quantrik QXP /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix 2.0CP / Kira80 / Exent 65% / FMJ60 / Haus 65 / Kikuichimonji / Cake 60 / 2x AU Unikorn  Commission/ LZ XE / Paraluman 60 / AI03 Andromeda / Dalco 959 Mini GT / LZ Erghost /  Finder Works Hyphen / 2x Singa Kohaku / Linworks EM8 / GAFxTGR 910 / TGRxKLC Dolice / TGR 910v2 ME / Noxary Valhalla / Hiney Ibis / LZ REs / PerryWorks MC65 / Hiney Poly TKL One / RS60 / Zekk RBB / QK80 / Keycult No 2 TKL / FLX Virgo r2 / Matrix Navi

Coming --   Lynx50 (wixx scammed us) / Ladybird60 / JJW Derivative / TGR Shi

100+ GMK sets


Offline shower_king

  • Thread Starter
  • Posts: 524
  • Location: Shang Hai. China.
  • Pain is weakness leaving your body
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #82 on: Tue, 26 June 2018, 20:28:09 »
2018/6/27
Hi everyone, I am a little busy with my own work. I have sent about 1/3 invoice already. I will sent others soon. If you want to give up the slot , that is all right, feel comfortable to PM me, I will cancel for you.
Thank you.

Offline mkarlsson

  • Posts: 338
  • Location: Spain
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #83 on: Wed, 27 June 2018, 02:57:42 »
Thanks for the update! Hope I get the invoice soon...

Offline mkarlsson

  • Posts: 338
  • Location: Spain
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #84 on: Sun, 01 July 2018, 09:49:17 »
Still no invoice here...

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #85 on: Sun, 01 July 2018, 12:43:51 »
Thanks, i wonder if there is a pic of the top with out the caps although my hopes for a plate are getting slimmer  :'(
I will have a extra polycarb TKL plate by the time this arrives, hoping that will will work with this work of art.

It will not, putting aside that you'd have to cut off the mounting points of the plate, the spacing on the F row and navcluster is different from what other TKLs use.

Hey shower i sent you PM regarding a Extra PCB for the 80%. the invoice only had the extra cable. Also will there be a form which shows what our orders are?

Offline blighty

  • Posts: 403
  • Location: New York, USA
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #86 on: Wed, 04 July 2018, 18:56:35 »
Thanks, i wonder if there is a pic of the top with out the caps although my hopes for a plate are getting slimmer  :'(
I will have a extra polycarb TKL plate by the time this arrives, hoping that will will work with this work of art.

It will not, putting aside that you'd have to cut off the mounting points of the plate, the spacing on the F row and navcluster is different from what other TKLs use.

Hey shower i sent you PM regarding a Extra PCB for the 80%. the invoice only had the extra cable. Also will there be a form which shows what our orders are?

Now that we more or less know that GH isn't changing significantly for the time being, just seconding the idea putting the list of usernames and their orders in the OP (so people know if they are in the buy or not, how far off their submission was if they didn't make it in, and the status of their payment).
LZ ergo (MX silent red) | JER - A06 (MX silent black-red springs) | Duck Lightsaver V2 (MX red) | Duck Octagon V2 (gateron clear) (lifted pads) | Duck Orion V2 (gateron red) | TKC 1800 (gateron silent reds) | Mistel MD770 (MX red with GMK silencing clips) | Realforce R2TSLA-US4-IV | Realforce R2TLSA-US4-BK | TX 75 (gateron clear) | KBDFANS 75 ("vintage" MX blues) | Kinesis Freestyle Pro (MX red) | MS Surface Ergonomic | MS Natural Ergonomic Keyboard 4000 | Filco Majestouch 2 TKL (MX black) | Phantom (Filco case) ("vintage" MX blacks | Spr1t 75% PCB x 2 (MX black and gateron clear) | Cherry G80-1865 (MX browns with black springs)

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #87 on: Wed, 04 July 2018, 18:57:42 »
Any updates on invoicing?

Sent from my mobile using Tapatalk


Offline wixxzblu

  • Posts: 210
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #88 on: Fri, 06 July 2018, 16:34:21 »
I think i resubmitted my google form to make small change in my initial form, do i jump to last place by doing so?, because i just did in the SKB GB.

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #89 on: Fri, 06 July 2018, 21:35:40 »
sent you a PM regarding the invoice i received.

Offline neralo

  • Posts: 178
  • Location: Singapore
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #90 on: Fri, 06 July 2018, 22:30:16 »
I think i resubmitted my google form to make small change in my initial form, do i jump to last place by doing so?, because i just did in the SKB GB.


You position doesn’t change when you make edits, this has been discussed before in previous threads. If you haven’t received an invoice and you’re sure you submitted before the limit was met, then have patience, shower has said he’s busy but working on it.


Sent from my iPhone using Tapatalk
HHKB Pro 2 55g | TGR 910 55g Vintage Blacks | Apple Standard M0116 Orange Alps | Rosewill RK9000 Cherry MX Blues | Diverge TM 2 WKLears

Offline Jubileus

  • Posts: 105
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #91 on: Sat, 07 July 2018, 06:34:33 »
Will it be safe to use plate mount switches on this? im thinking it might easily break the solder points.
also what are the disadvantages of it?
im planning to use my pandas on this.

Offline wixxzblu

  • Posts: 210
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #92 on: Sat, 07 July 2018, 06:36:45 »
Will it be safe to use plate mount switches on this? im thinking it might easily break the solder points.
also what are the disadvantages of it?
im planning to use my pandas on this.

Safe yes, but it will be very hard to get everything aligned properly.

Since this is a plateless design, i would go for pcb mount switches.

Offline neralo

  • Posts: 178
  • Location: Singapore
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #93 on: Sat, 07 July 2018, 06:41:17 »
Will it be safe to use plate mount switches on this? im thinking it might easily break the solder points.
also what are the disadvantages of it?
im planning to use my pandas on this.

You definitely wanna use pcb mount switches. If you don’t mind misaligned switches, or if you’re careful enough, then sure go for plate mount.


Sent from my iPhone using Tapatalk
HHKB Pro 2 55g | TGR 910 55g Vintage Blacks | Apple Standard M0116 Orange Alps | Rosewill RK9000 Cherry MX Blues | Diverge TM 2 WKLears

Offline mkarlsson

  • Posts: 338
  • Location: Spain
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #94 on: Sat, 07 July 2018, 08:33:36 »
Got and paid my invoice. Thanks!

Offline alisonica

  • Posts: 104
  • Location: Germany
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #95 on: Sat, 07 July 2018, 09:32:27 »
I GOT MY INVOICE AND I PAID IT HAHAHAH NOICEEEEE CAPS LOCK FOR SERIOUSNESS

Offline LightningXI

  • * Elevated Elder
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #96 on: Sun, 08 July 2018, 03:24:08 »
When are payments/invoices due?

Offline sythie

  • Posts: 50
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #97 on: Mon, 09 July 2018, 13:04:19 »
I am curious to find out which switches people are considering for a PCB-mounted keyboard.
Especially from people lucky enough to try such a keyboard beforehand.

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #98 on: Mon, 09 July 2018, 13:08:35 »
I am curious to find out which switches people are considering for a PCB-mounted keyboard.
Especially from people lucky enough to try such a keyboard beforehand.
Not sure, either i will need to mod switches so that way i can use them or go with some of zeals switches since they are all PC mount.
« Last Edit: Mon, 09 July 2018, 13:29:55 by JubJubCity »

Offline wixxzblu

  • Posts: 210
Re: 【GB】JER-A06(80% and 20% pad)
« Reply #99 on: Mon, 09 July 2018, 13:11:35 »
Im looking to mount some nice ergo clears and and my own creation, HYPER browns (basically 62g lubed mx brown in retooled blue housings).