Author Topic: [IC] LZ-MX GH (Read 28462 times)

danielucf · « **Reply #50 on:** Tue, 01 October 2013, 00:29:01 »

blue color

pink color

Sifo · « **Reply #51 on:** Tue, 01 October 2013, 00:30:54 »

I'm out, qq

Moomoo · « **Reply #52 on:** Thu, 03 October 2013, 08:50:15 »

in fo sho

TLSC.wipeOut · « **Reply #53 on:** Thu, 03 October 2013, 08:52:37 »

Quote from: danielucf on Tue, 01 October 2013, 00:29:01

blue color
Show Image

pink color
Show Image

not bad son

laden3 · « **Reply #54 on:** Thu, 03 October 2013, 09:03:23 »

Are you going with the steel bottom plate with the mirror finish and the heavy steel bar?

Will there be an option with lighter anodized aluminum bottom plate and feet like these http://www.kbdmod.co.kr/product/detail.html?product_no=26&cate_no=12&display_group=1 ?

Is it possible to have acrylic switch plates instead of aluminum ones?

danielucf · « **Reply #55 on:** Fri, 04 October 2013, 23:55:42 »

Quote from: laden3 on Thu, 03 October 2013, 09:03:23

Are you going with the steel bottom plate with the mirror finish and the heavy steel bar?

Will there be an option with lighter anodized aluminum bottom plate and feet like these http://www.kbdmod.co.kr/product/detail.html?product_no=26&cate_no=12&display_group=1 ?

Is it possible to have acrylic switch plates instead of aluminum ones?

It would be like LZ-GH with heavy bar, probably mirror finish, and aluminum plate. I don't like acrylic plates because if it breaks then you are screwed.

goobus · « **Reply #56 on:** Sat, 05 October 2013, 00:08:11 »

Any word on when we will be proceeding to gb? Just when we get to 40 ish? How long do these things usually take?

Jokrik · « **Reply #57 on:** Sat, 05 October 2013, 18:28:28 »

Tempting... the pink with valentine set would really look good...

Tempiz · « **Reply #58 on:** Sun, 06 October 2013, 16:33:05 »

Definitely In.

blighty · « **Reply #59 on:** Sun, 06 October 2013, 17:27:32 »

Since this plate seems to be both WinKey and WKL compatible, would the following bottom row layout work?
1.5x 1.5x 7x 1x 1x 1x 1x 1x 1x

yicaoyimu · « **Reply #60 on:** Sun, 06 October 2013, 20:39:51 »

This could be my first Korean board.

Bullveyr · « **Reply #61 on:** Sat, 12 October 2013, 10:25:09 »

Interested, just would need to find somebody for assembly.

MKULTRA · « **Reply #62 on:** Mon, 14 October 2013, 00:46:07 »

Daniel is this gonna have the acrylic middle layer shown in the keyboards here: http://lzlife.tistory.com/entry/MX-MINI

That would be soooo sick.

danielucf · « **Reply #63 on:** Mon, 14 October 2013, 11:14:27 »

Quote from: Bullveyr on Sat, 12 October 2013, 10:25:09

Interested, just would need to find somebody for assembly.

I could do that for you.

Quote from: MKULTRA on Mon, 14 October 2013, 00:46:07

Daniel is this gonna have the acrylic middle layer shown in the keyboards here: http://lzlife.tistory.com/entry/MX-MINI

That would be soooo sick.

acrylic plate is nice until it breaks and you realize you now no longer have a functioning plate for your $300-400 keyboard and your options to replace it are slim to none in addition to being really expensive. So in short no it will not have an acrylic plate, it will be exactly like LZ-GH just in the 75% layout. I think the previous LZ-MX used the same case design as the LZ-GH so this is sort of a remake of that except probably with the mirror finish on the bottom, and possibly a high end sticker to apply not unlike the LZ-SE. Those are details I need to work out still.

Bullveyr · « **Reply #64 on:** Mon, 14 October 2013, 15:52:42 »

Quote from: danielucf on Mon, 14 October 2013, 11:14:27

Quote from: Bullveyr on Sat, 12 October 2013, 10:25:09
Interested, just would need to find somebody for assembly.

I could do that for you.

Thanks, not that I was worried that I wouldn't find somebody with all the helpful people around here.

Signature · « **Reply #65 on:** Mon, 14 October 2013, 15:53:50 »

So this is where the GB is going to happen or will you open another thread in the GB section to order from? Interested though!

MKULTRA · « **Reply #66 on:** Mon, 14 October 2013, 15:59:28 »

Quote from: Signature on Mon, 14 October 2013, 15:53:50

So this is where the GB is going to happen or will you open another thread in the GB section to order from? Interested though!

When it happens Dan will open up a new thread in the GB section. It may be a little while though.

watterrbottle · « **Reply #67 on:** Mon, 14 October 2013, 21:54:24 »

Super interested

Findecanor · « **Reply #68 on:** Tue, 15 October 2013, 02:26:07 »

Quote from: danielucf on Mon, 23 September 2013, 12:20:58

1 x case (top, bottom, Foot bar)

Excuse me, but why does there need to be both a top and a bottom? If I were you I would construct it like a Poker, with only one piece + foot bar.
I would think that what you are after is to sandwich the plate between top and bottom, but ... would that really make a difference to having a plate screwed firmly to the bottom?

Moosecraft · « **Reply #69 on:** Tue, 15 October 2013, 07:32:11 »

Quote from: Findecanor on Tue, 15 October 2013, 02:26:07

Quote from: danielucf on Mon, 23 September 2013, 12:20:58
1 x case (top, bottom, Foot bar)
Excuse me, but why does there need to be both a top and a bottom? If I were you I would construct it like a Poker, with only one piece + foot bar.
I would think that what you are after is to sandwich the plate between top and bottom, but ... would that really make a difference to having a plate screwed firmly to the bottom?

It looks nicer imo

shawn24 · « **Reply #70 on:** Mon, 21 October 2013, 08:46:32 »

any news or updates about this ic? quite looking forward to it

exitface · « **Reply #71 on:** Sat, 26 October 2013, 16:53:58 »

Also interested in this.

danielucf · « **Reply #72 on:** Sun, 27 October 2013, 23:11:12 »

Waiting to see if the LZ-MX GH could be done in the same case style as the LZ-FE. It may be awhile.

yicaoyimu · « **Reply #73 on:** Sun, 27 October 2013, 23:35:17 »

Quote from: danielucf on Sun, 27 October 2013, 23:11:12

Waiting to see if the LZ-MX GH could be done in the same case style as the LZ-FE. It may be awhile.

If there is a 50 orders limit like LZ-FE then I'd rather not see it done that way...

I sent you a PM, Deaniel. Not sure whether you got a chance to read it.

yicaoyimu · « **Reply #74 on:** Tue, 05 November 2013, 00:04:08 »

Any update from LifeZone? Any estimate of when LZ-MX will happen? I guess LZ must be very busy with all the LZ-FE and LZ-CE orders right now, but I want a LZ-MX so desperately.

Photoelectric · « **Reply #75 on:** Tue, 05 November 2013, 00:12:43 »

LZ AluSkin in two form factors is also still in production, so they are busy indeed.

archer · « **Reply #76 on:** Wed, 06 November 2013, 13:43:53 »

Definitely in for this!

danielucf · « **Reply #77 on:** Sat, 09 November 2013, 10:20:40 »

If this even happens it won't be until 2014 most likely.

TLSC.wipeOut · « **Reply #78 on:** Sat, 09 November 2013, 11:47:26 »

Quote from: danielucf on Sat, 09 November 2013, 10:20:40

If this even happens it won't be until 2014 most likely.

Well then... that gives me time to actually save up for one! xD sweeettt

Elrick · « **Reply #79 on:** Sat, 09 November 2013, 18:50:20 »

Quote from: danielucf on Sat, 09 November 2013, 10:20:40

If this even happens it won't be until 2014 most likely.

No worries, take your time because it's always best to get everything just right rather than rushing headlong into a possible disaster.

joneslee85 · « **Reply #80 on:** Mon, 18 November 2013, 22:45:52 »

@danielucf i am interested in, just worried when I will get my hand on this if this is going to be shippable

Emmiya · « **Reply #81 on:** Sat, 30 November 2013, 02:39:30 »

Well, a little late to the party, but I'd definitely be interested in a WKL blue model.
However, as I've never even done anything other than swap in/out keycaps, I fear I would need some sort of assembly.

yicaoyimu · « **Reply #82 on:** Tue, 31 December 2013, 21:15:05 »

It's 2014 now (at least it is in China) and I'm still patiently waiting.

Dyelbro · « **Reply #83 on:** Sat, 04 January 2014, 20:49:48 »

I'm in.

SpAmRaY · « **Reply #84 on:** Mon, 06 January 2014, 07:57:23 »

Quote from: yicaoyimu on Tue, 31 December 2013, 21:15:05

It's 2014 now (at least it is in China) and I'm still patiently waiting.

You should probably be prepared to wait a very, very long time.

jufa · « **Reply #85 on:** Fri, 17 January 2014, 11:28:27 »

interested in this, n waiting...

yicaoyimu · « **Reply #86 on:** Wed, 19 March 2014, 08:37:16 »

I guess this is never going to happen? It has been half a year now.

tbc · « **Reply #87 on:** Thu, 20 March 2014, 01:49:45 »

has anyone actually released a public 75% Kustom besides GON?

I really think no at this point

mashby · « **Reply #88 on:** Thu, 20 March 2014, 09:15:40 »

Quote from: tbc on Thu, 20 March 2014, 01:49:45

has anyone actually released a public 75% Kustom besides GON?

I really think no at this point

What about the KBT Race and the upcoming KBT Race II? Aren't those considered 75%?

digi · « **Reply #89 on:** Thu, 20 March 2014, 10:27:16 »

You might also checkout the Keycool 84 or the ChocMini, i like those layouts a little more because the function keys are directly above the number keys. But yes, in regards to Korean customs, there are not many. The GON Mx Mini, the LZ-MX and maybe a couple more floating around.

mashby · « **Reply #90 on:** Thu, 20 March 2014, 10:30:38 »

Quote from: digi on Thu, 20 March 2014, 10:27:16

You might also checkout the Keycool 84 or the ChocMini, i like those layouts a little more because the function keys are directly above the number keys. But yes, in regards to Korean customs, there are not many. The GON Mx Mini, the LZ-MX and maybe a couple more floating around.

Good point digi. I missed the point that tbc was asking about "custom" and not commercial boards. Doh!

digi · « **Reply #91 on:** Thu, 20 March 2014, 10:33:16 »

Quote from: mashby on Thu, 20 March 2014, 10:30:38

Quote from: digi on Thu, 20 March 2014, 10:27:16
You might also checkout the Keycool 84 or the ChocMini, i like those layouts a little more because the function keys are directly above the number keys. But yes, in regards to Korean customs, there are not many. The GON Mx Mini, the LZ-MX and maybe a couple more floating around.

Good point digi. I missed the point that tbc was asking about "custom" and not commercial boards. Doh!

All good Mashby!

tadbitnerdy · « **Reply #92 on:** Mon, 24 March 2014, 10:38:52 »

If this happens, I would buy one in black. So, interested

cannonking · « **Reply #93 on:** Sat, 19 April 2014, 22:27:54 »

I hope this happens and I hope I have enough money when it does.

Pacifist · « **Reply #94 on:** Sat, 19 April 2014, 22:29:55 »

want 1.5x 1.5x 7x 1.5x 1.5x 1x 1x 1x

Is there a side view of the case?

yicaoyimu · « **Reply #95 on:** Sat, 19 April 2014, 22:39:45 »

Quote from: Pacifist on Sat, 19 April 2014, 22:29:55

want 1.5x 1.5x 7x 1.5x 1.5x 1x 1x 1x

Is there a side view of the case?

The case design is not settled yet. Daniel referred to the new LZ-MX kit as LZ-MX FE, and the only clue of what that could look like is a classifieds post by LifeZ, which is quoted below. Daniel also mentioned in a PM that "It is in very early planing stages". So, who knows.

Quote from: LifeZ on Wed, 18 December 2013, 20:22:21

Hello, all

Special keyboard for sale.

1. LZ TRiK X_T + SOWARE

~~Price : $740 (include paypal fee, excluding Ship)~~
Price : $770 (include paypal fee, excluding Ship)[/

This is TRiK X Transformation.

Special Version

Spec.

Case : Alu Case and include sts plate. Half-Glare Black

Plate : Alu, Silver

PCB : TRiK V2.1 PCB (USB, onboard USB HUB 2 port)

Switch : Vintage Cherry MX Clear with 55g,White stickers, Full tuned

Lay-out : Row 1.5x-1.0x-1.5x-7.0x-1.5x-1.0x-1.5x

bot case Scratch (Pic)

+

SOWARE KEY_CAPS SET (PIC)

--- PIC. Without key_caps ---

(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)

2. LZ MX FE -> ninjadoc

Price : $670 (include paypal fee, excluding Ship)

Special Version

Case : Alu Case and include Brass Name plate. Glare Black

Plate : Alu, Black

Switch : Vintage Cherry MX Clear with 55g, Full LED
ABOstudio Transperant Switch top case

PCB : MX-mini U (USB & PS2)

LEDs Mode Change - > ESC + Caps

--- Without key_caps ---

(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)

Shipping price
Korea EMS
US, EU : $70, ASIA : 40

Pm.to me.plz

cannonking · « **Reply #96 on:** Sat, 19 April 2014, 23:18:39 »

I hope it looks like the LZ-MX-SE as opposed to LZ-GH style :x.

ykilroy · « **Reply #97 on:** Sun, 20 April 2014, 07:49:11 »

I'm in, too.

I'm looking for lz-mx or lz-mx-se but it's very hard to find it.

metalliqaz · « **Reply #98 on:** Sun, 20 April 2014, 07:56:52 »

I'll be in for this.

cannonking · « **Reply #99 on:** Sun, 20 April 2014, 12:41:50 »

By the way, are there any 75% keycap sets? I know there's Tsangan, but the profile on Insert/Delete/PageUp/Down will be wrong. Maybe some in Korea?

News:

Author Topic: [IC] LZ-MX GH (Read 28462 times)