Author Topic: [GB] An aluminium switch opener: The Nutcracker (Read 50723 times)

ilouis_07 · « **Reply #50 on:** Wed, 28 November 2018, 00:50:44 »

Quote from: blizzara01 on Tue, 27 November 2018, 22:25:33

That was fast

Is Kailh nutcracker compatible to all Kailh switches (I believe so )?

yup, that is correct.

ilouis_07 · « **Reply #51 on:** Wed, 28 November 2018, 18:55:58 »

more photos from production side.

从我的 iPhone 发送，使用 Tapatalk

oh_chesteroni · « **Reply #52 on:** Wed, 28 November 2018, 19:06:25 »

I assume if it says "no" under invoice number that means the invoice will be generated at a later date? Also, would that mean that we did not make it into the early production round if it says "no" under invoice number?

ilouis_07 · « **Reply #53 on:** Wed, 28 November 2018, 19:09:15 »

Quote from: oh_chesteroni on Wed, 28 November 2018, 19:06:25

I assume if it says "no" under invoice number that means the invoice will be generated at a later date? Also, would that mean that we did not make it into the early production round if it says "no" under invoice number?

Hi “no” means I haven’t send invoice out yet. Will send it out later one by one

oh_chesteroni · « **Reply #54 on:** Wed, 28 November 2018, 19:12:48 »

Quote from: ilouis_07 on Wed, 28 November 2018, 19:09:15

Quote from: oh_chesteroni on Wed, 28 November 2018, 19:06:25
I assume if it says "no" under invoice number that means the invoice will be generated at a later date? Also, would that mean that we did not make it into the early production round if it says "no" under invoice number?
Hi “no” means I haven’t send invoice out yet. Will send it out later one by one

Thanks!

ilouis_07 · « **Reply #55 on:** Thu, 29 November 2018, 21:23:51 »

Last 3 days, thanks all for the support:3

ilouis_07 · « **Reply #56 on:** Fri, 30 November 2018, 07:42:27 »

All the invoices sent so far.

lovetree · « **Reply #57 on:** Fri, 30 November 2018, 11:07:38 »

OP, PMed.

sythie · « **Reply #58 on:** Fri, 30 November 2018, 12:57:45 »

What is the grade of the aluminum used?

RETURNISO · « **Reply #59 on:** Fri, 30 November 2018, 20:13:03 »

Just ordered!

is there any video of the nuts in the works?

a_ak57 · « **Reply #60 on:** Fri, 30 November 2018, 20:47:47 »

Quote from: RETURNISO on Fri, 30 November 2018, 20:13:03

Just ordered! is there any video of the nuts in the works?

https://www.instagram.com/p/BqPsftqnkXP/

missylo · « **Reply #61 on:** Fri, 30 November 2018, 20:58:44 »

Quote from: RETURNISO on Fri, 30 November 2018, 20:13:03

Just ordered! is there any video of the nuts in the works?

There are 2 videos in the IC link for the nutcracker!

(give me a while to dig up the link)

Edit: here you go!

https://geekhack.org/index.php?topic=98204.100

Sent using Tapatalk

tunadesu · « **Reply #62 on:** Fri, 30 November 2018, 23:59:10 »

just joined!

Luciqueii · « **Reply #63 on:** Sat, 01 December 2018, 13:09:17 »

I joined the GB now... and I would like you to declare 10usd to Sweden bcs of customs. Thanks!

oldcat · « **Reply #64 on:** Sat, 01 December 2018, 14:54:47 »

In for 2 MX and 1 Kaihua

Thanks Louis

hammerbrotha · « **Reply #65 on:** Sat, 01 December 2018, 15:50:32 »

I see my name on the list (closer to the bottom). do you know when invoices will be sent out?

Thanks!

Pitrek · « **Reply #66 on:** Sat, 01 December 2018, 16:27:14 »

Hi Louis,

I've been searching for such a tool for quite some time. I need to open plenty of switches to make keychains with my own keycap (a little gift for clackers who order my sleeves from Mechfashion) It's going to be very useful for me! Thanks for making these. I've had plastic, 3D printed one in the past, guess what happened 15 switches later ;-)

How much for shipping to Poland? Most likely I'm blind, but I couldn't find the price of shipping.

RETURNISO · « **Reply #67 on:** Sat, 01 December 2018, 19:19:11 »

Quote from: a_ak57 on Fri, 30 November 2018, 20:47:47

Quote from: RETURNISO on Fri, 30 November 2018, 20:13:03
Just ordered! is there any video of the nuts in the works?

https://www.instagram.com/p/BqPsftqnkXP/

Awesome, thanks!

missylo · « **Reply #68 on:** Sat, 01 December 2018, 20:52:40 »

Quote from: Pitrek on Sat, 01 December 2018, 16:27:14

Hi Louis,

I've been searching for such a tool for quite some time. I need to open plenty of switches to make keychains with my own keycap (a little gift for clackers who order my sleeves from Mechfashion) It's going to be very useful for me! Thanks for making these. I've had plastic, 3D printed one in the past, guess what happened 15 switches later ;-)

How much for shipping to Poland? Most likely I'm blind, but I couldn't find the price of shipping.

Hi there,

Prices include shipping to a list of 39 countries. U will. See this list in the GB form (newly added feature).

If the country is not in the list, u can select #40. I'd suggest that you PM Louis here. He'll need to look up shipping for countries outside of the list.

I think it best you submit an order form first and then get in touch with him to work out the shipping charges (to countries not on the list).

Hope that helps!

Sent using Tapatalk

neojonathan · « **Reply #69 on:** Sat, 01 December 2018, 21:21:46 »

Ordered two of these awesome tool !!!

Looking forward to these !

oldcat · « **Reply #70 on:** Sat, 01 December 2018, 21:24:34 »

Quote from: Pitrek on Sat, 01 December 2018, 16:27:14

Hi Louis,

I've been searching for such a tool for quite some time. I need to open plenty of switches to make keychains with my own keycap (a little gift for clackers who order my sleeves from Mechfashion) It's going to be very useful for me! Thanks for making these. I've had plastic, 3D printed one in the past, guess what happened 15 switches later ;-)

How much for shipping to Poland? Most likely I'm blind, but I couldn't find the price of shipping.

Included i think

oldcat · « **Reply #71 on:** Sat, 01 December 2018, 21:25:28 »

Quote from: sJ1N on Tue, 27 November 2018, 17:45:26

Also in for one of each ! Guess i'll be in the 2nd production run tho.. any estimates on shipping for the 2nd batch ?

Hmm what do you mean? First production run is done?

missylo · « **Reply #72 on:** Sat, 01 December 2018, 21:29:22 »

Quote from: sJ1N on Tue, 27 November 2018, 17:45:26

Also in for one of each ! Guess i'll be in the 2nd production run tho.. any estimates on shipping for the 2nd batch ?

Hi there,

Batch 2 estimates are in the timeline section, written in between prices and shipping countries

Sent using Tapatalk

missylo · « **Reply #73 on:** Sat, 01 December 2018, 21:32:14 »

Quote from: oldcat on Sat, 01 December 2018, 21:25:28

Quote from: sJ1N on Tue, 27 November 2018, 17:45:26
Also in for one of each ! Guess i'll be in the 2nd production run tho.. any estimates on shipping for the 2nd batch ?

Hmm what do you mean? First production run is done?

Production for the first batch was underway before the GB started (I believe he linked to that post in this GB post. The original comment was made in the IC.)

Louis wanted a shorter GB time frame, so went ahead and began 400 (the 300/100) aka batch 1.

He'll produce as many that are ordered during GB though!

Sent using Tapatalk

oldcat · « **Reply #74 on:** Sat, 01 December 2018, 21:32:58 »

Quote from: missylo on Sat, 01 December 2018, 21:32:14

Quote from: oldcat on Sat, 01 December 2018, 21:25:28
Quote from: sJ1N on Tue, 27 November 2018, 17:45:26
Also in for one of each ! Guess i'll be in the 2nd production run tho.. any estimates on shipping for the 2nd batch ?

Hmm what do you mean? First production run is done?
Production for the first batch was underway before the GB started (I believe he linked to that post in this GB post. The original comment was made in the IC.)

Louis wanted a shorter GB time frame, so went ahead and began 400 (the 300/100) aka batch 1.

He'll produce as many that are ordered during GB though!

Sent using Tapatalk

nice thanks!

missylo · « **Reply #75 on:** Sat, 01 December 2018, 21:42:29 »

Last 12 Hours to get your nutcracker!!!

Sent using Tapatalk

missylo · « **Reply #76 on:** Sat, 01 December 2018, 21:44:08 »

Quote from: oldcat on Sat, 01 December 2018, 21:32:58

Quote from: missylo on Sat, 01 December 2018, 21:32:14
Quote from: oldcat on Sat, 01 December 2018, 21:25:28
Quote from: sJ1N on Tue, 27 November 2018, 17:45:26
Also in for one of each ! Guess i'll be in the 2nd production run tho.. any estimates on shipping for the 2nd batch ?

Hmm what do you mean? First production run is done?
Production for the first batch was underway before the GB started (I believe he linked to that post in this GB post. The original comment was made in the IC.)

Louis wanted a shorter GB time frame, so went ahead and began 400 (the 300/100) aka batch 1.

He'll produce as many that are ordered during GB though!

Sent using Tapatalk

nice thanks!

Found where the links are: in the GB FAQ section up top

Sent using Tapatalk

ilouis_07 · « **Reply #77 on:** Sat, 01 December 2018, 22:46:02 »

Last 11 hours

ihalatch · « **Reply #78 on:** Sun, 02 December 2018, 00:23:54 »

Invoice paid.

Luciqueii · « **Reply #79 on:** Sun, 02 December 2018, 06:25:10 »

Quote from: ilouis_07 on Sat, 01 December 2018, 22:46:02

Last 11 hours

Bro I paid and joined the GB but can you declare 10usd to sweden and not 25usd please bcs of customs?
Thank you!

Helcera · « **Reply #80 on:** Sun, 02 December 2018, 07:19:32 »

Quote from: FLawLesS on Sun, 02 December 2018, 06:25:10

Quote from: ilouis_07 on Sat, 01 December 2018, 22:46:02
Last 11 hours

Bro I paid and joined the GB but can you declare 10usd to sweden and not 25usd please bcs of customs?
Thank you!

I can't believe you're trying to goad him into participating in tax evasion over like a couple of euros

Or Kronor I guess, since you live in Sweden.

ilouis_07 · « **Reply #81 on:** Sun, 02 December 2018, 07:40:44 »

Quote from: FLawLesS on Sun, 02 December 2018, 06:25:10

Quote from: ilouis_07 on Sat, 01 December 2018, 22:46:02
Last 11 hours

Bro I paid and joined the GB but can you declare 10usd to sweden and not 25usd please bcs of customs?
Thank you!

will try

ilouis_07 · « **Reply #82 on:** Sun, 02 December 2018, 07:57:07 »

Last 2 hours:)))

ilouis_07 · « **Reply #83 on:** Sun, 02 December 2018, 10:01:46 »

GB closed at 3rd Dec 00:00AM , Thanks everyone:3

SomePunkassKid · « **Reply #84 on:** Sun, 02 December 2018, 10:15:13 »

Invoice paid.
Nice!

ItsAllen · « **Reply #85 on:** Sun, 02 December 2018, 13:47:14 »

****, I just missed it.

Oni74 · « **Reply #86 on:** Sun, 02 December 2018, 13:54:27 »

Although i've a few switch opening tools, this looks too good to pass up - in for one!

enrique.aliaga · « **Reply #87 on:** Sun, 02 December 2018, 22:58:56 »

Damn it... I just missed it

Any estimates of when (and if) are we going to get Round 2?

Sent from my iPhone using Tapatalk

dyka.tran · « **Reply #88 on:** Mon, 03 December 2018, 03:39:03 »

Quote from: enrique.aliaga on Sun, 02 December 2018, 22:58:56

Damn it... I just missed it

Any estimates of when (and if) are we going to get Round 2?

Sent from my iPhone using Tapatalk

Actually this was round #2

since the first round went out of stock way too quickly so OP had to open the #2 round right after that

ilouis_07 · « **Reply #89 on:** Mon, 03 December 2018, 03:40:48 »

Quote from: dyka.tran on Mon, 03 December 2018, 03:39:03

Quote from: enrique.aliaga on Sun, 02 December 2018, 22:58:56
Damn it... I just missed it

Any estimates of when (and if) are we going to get Round 2?

Sent from my iPhone using Tapatalk

Actually this was round #2 since the first round went out of stock way too quickly so OP had to open the #2 round right after that

Batch one sold out in 13 hours. So I had prepared batch 2:) All consider as R1:)

ilouis_07 · « **Reply #90 on:** Mon, 03 December 2018, 09:21:49 »

Guys, invoice will due by tmr. Pls pay the invoice before i cancel your order, Thanks.

juaninamilli · « **Reply #91 on:** Mon, 03 December 2018, 11:40:52 »

The hard part will be putting all my projects on hold while I wait for this. lol

Sent from my Pixel 3 using Tapatalk

Knxwledge · « **Reply #92 on:** Mon, 03 December 2018, 14:58:17 »

I can't believe I missed out on this!

ilouis_07 · « **Reply #93 on:** Mon, 03 December 2018, 21:14:44 »

I just set up a server, for better communication and progress updates purpose, feels free to join:)

TianYue Lab Discord Link:

https://discord.gg/cdQfxt

japanesehorrorwriter · « **Reply #94 on:** Tue, 04 December 2018, 00:42:08 »

I got billed for three but only needed two. Tried to reach out via email to reduce the invoice but never heard back so i just ended up purchasing all three. If anyone wants to buy my extra pm me.

ilouis_07 · « **Reply #95 on:** Tue, 04 December 2018, 01:37:00 »

Quote from: japanesehorrorwriter on Tue, 04 December 2018, 00:42:08

I got billed for three but only needed two. Tried to reach out via email to reduce the invoice but never heard back so i just ended up purchasing all three. If anyone wants to buy my extra pm me.

Hi,
You can pm me on geekhack. Me or my team may miss the email, apologize

japanesehorrorwriter · « **Reply #96 on:** Tue, 04 December 2018, 09:09:15 »

Quote from: ilouis_07 on Tue, 04 December 2018, 01:37:00

Quote from: japanesehorrorwriter on Tue, 04 December 2018, 00:42:08
I got billed for three but only needed two. Tried to reach out via email to reduce the invoice but never heard back so i just ended up purchasing all three. If anyone wants to buy my extra pm me.
Hi,
You can pm me on geekhack. Me or my team may miss the email, apologize

No worries. The extra was already sold. Will remember for next time!

Vireca · « **Reply #97 on:** Thu, 06 December 2018, 02:59:42 »

It os posible to take a spot for one nutcracker? I think I'll need one for the new Holy Pandas

gutsack · « **Reply #98 on:** Thu, 06 December 2018, 10:55:53 »

Is everyone in the checklist in batch one? Or does it still need to be determined?

voight-kampff · « **Reply #99 on:** Thu, 06 December 2018, 11:01:08 »

yes, that would be good to know, who is in or who is out for whatever reasons

Quote from: gutsack on Thu, 06 December 2018, 10:55:53

Is everyone in the checklist in batch one? Or does it still need to be determined?

News:

Author Topic: [GB] An aluminium switch opener: The Nutcracker (Read 50723 times)