| Vendors | | | Base kit (MOQ 250) | | | R0 kit (MOQ 100) | | | Icon kit (MOQ 100) | | | NorDE kit (MOQ 100) | | | Spacebar kit (MOQ 100) | |
zFrontier | ¥1019 | ¥212 | ¥240 | ¥278 | ¥140 |
Kono | $169.99 | $36.99 | $39.99 | $49.99 | $23.99 |
Mykeyboard.eu | €139 | €32 | €35 | €39 | €22 |
thank got it's open forever
thank got it's open forever
Well the GB thread was only written today ;)
Are the alphas are gonna be grey like in the photo and the modifiers a bit darker than the previous round of GMK Triumph Adler?looks exactly like the og alpha in the pics, and modifiers will be lighter than intelli78's GMK Triumph Adler.
Are they supposed to look like that or just look different on camera?
56 base set sold until 7/3.
Need more orders! :D
GatekeepingFeel free to use whatever words you want to satisfy yourself but don’t impose your opinions on us.
GatekeepingFeel free to use whatever words you want to satisfy yourself but don’t impose your opinions on us.
Reminder that the GB doesn't until the end of the month! (Greatest day of the year, too.)I'll admit to that, not everyone knows the history of this set. The whole point is to be more gray this time. I likes me gray blues.
So 50 orders in just the first few days isn't too bad, especially since it started later than estimated.
Itty suggestion, but I'd recommend changing the banner. I know I mentioned it, but I wasn't the only one confused by the final color of the alphas. The caps next to the OG ones made me think the same color for intelli's alphas was going to be used. Maybe you could put the comparison at the bottom; like "here's what intelli's looked like compared to OG and this GB" or summat.
Is it too late to add R0 support for 1800? :Dguess so
What board does the R0 kit originate from? Haven't seen it before. Is it just taller than R1?(https://i.imgur.com/dD6MbAd.jpg)
Why does the base set not have the classic icon mods, instead of the extra set?Some original sets have mixed mods and some have icon mods. There really isn’t a definitive standard on how they were made since it differed depending on where it was sold. At that point it’s up to the GB runner which one is in the base set.
Why does the base set not have the classic icon mods, instead of the extra set?Some original sets have mixed mods and some have icon mods. There really isn’t a definitive standard on how they were made since if differed depending on where it was sold. At that point it’s up to the GB runner which one is in the base set.
[...]
Pokes* Any updates on MOQ?
$170 on Kono.Store wtf
Sorry, I requested update 10 days ago, but there was no response from zFrontier.Pokes* Any updates on MOQ?
+1
Will this still end at the end of this month or is there a possibility of an extension?
Sorry, I requested update 10 days ago, but there was no response from zFrontier.Pokes* Any updates on MOQ?
+1
Will this still end at the end of this month or is there a possibility of an extension?
I'm a bit late to the party as i couldn't and still can't really decide. What color will the legends on the mods be? In all the pics it looks like white but i can't say for sure based on the GMK renders, looks pretty grey to me there. Would be nice if someone could tell me before the gb ends so i may still hop on. For what it's worth, hope they are not grey =)They are definitely not grey. Maybe I will use CP color.
I'm a bit late to the party as i couldn't and still can't really decide. What color will the legends on the mods be? In all the pics it looks like white but i can't say for sure based on the GMK renders, looks pretty grey to me there. Would be nice if someone could tell me before the gb ends so i may still hop on. For what it's worth, hope they are not grey =)They are definitely not grey. Maybe I will use CP color.
Sorry, I requested update 10 days ago, but there was no response from zFrontier.Pokes* Any updates on MOQ?
+1
Will this still end at the end of this month or is there a possibility of an extension?
sometimes you gotta bug em every 3 days
hopefully good news
Could you make sure that the mods are legible, or even better, review the samples with us to get it right? :( Not a good sign to me when the legends are still "maybe CP" during the GB period.(https://i.imgur.com/3e21Nyy.jpg)
Good catch, darthzero. I'll feel stupid to have joined two TA GBs if it turned to be grey on blue :confused:. Personally I find it gross.
Did we hit MOQ or are we waiting for a refund?
Could you make sure that the mods are legible, or even better, review the samples with us to get it right? :( Not a good sign to me when the legends are still "maybe CP" during the GB period.
Good catch, darthzero. I'll feel stupid to have joined two TA GBs if it turned to be grey on blue :confused:. Personally I find it gross.Show Image(https://i.imgur.com/3e21Nyy.jpg)
Through comparing these keys, I think CP color is almost the same. The final color will be finalized only after I get color samples from GMK.Did we hit MOQ or are we waiting for a refund?
zFrontier didn't tell me the correct number, but Base Kit and NorDE Kit didn't meet MOQ yet. Vendors are considering if they will purchase it to MOQ.
Groupbuy End Time: Jul.27.2018
Estimated Shipping Time: Dec.2018
So how long's left on this? I was planning on joining
Apparently this is being extended until August 12th according to kono.store. You can also still add to cart on zfrontier and mykeyboard.
Hopefully it hits MOQ by then.
Nobody can resist the beauty of teal and light grey anyways, so I'm sure it will make it.
As long as everyone doesn't forget about this. Or gets turned off by the price. Or Row 5 compatibility. :confused:
More positives than negatives if you like the colorway I think.
I'm in like flynn. We'll see what happens.
If nobody can resist it, how has it not hit MOQ yet? :p
Vendors have extended the time until August 12th and they will purchase base, r0, icon to MOQ. Spacebar kit is TBD. As for norde, they have sold less than 20 sets.
If you are still waiting for MOQ, now is the time to order.
Vendors have extended the time until August 12th and they will purchase base, r0, icon to MOQ. Spacebar kit is TBD. As for norde, they have sold less than 20 sets.
If you are still waiting for MOQ, now is the time to order.
Vendors have extended the time until August 12th and they will purchase base, r0, icon to MOQ. Spacebar kit is TBD. As for norde, they have sold less than 20 sets.
If you are still waiting for MOQ, now is the time to order.
Thank you! This is looking to be THE keycap set of 2018 for me, mostly because we're getting the correct colors and R0 to R5 caps, which is pretty insane :thumb:
Vendors have extended the time until August 12th and they will purchase base, r0, icon to MOQ. Spacebar kit is TBD. As for norde, they have sold less than 20 sets.
If you are still waiting for MOQ, now is the time to order.
Thank you! This is looking to be THE keycap set of 2018 for me, mostly because we're getting the correct colors and R0 to R5 caps, which is pretty insane :thumb:
I don't understand why the R0-kit needed to be all blue tbh
As for norde, they have sold less than 20 sets.
If you are still waiting for MOQ, now is the time to order.
As for norde, they have sold less than 20 sets.
If you are still waiting for MOQ, now is the time to order.
What happens to the folks who already ordered NorDE? Will there be any chance, that it will be shipped?
Based on the lack of transparency here I'm not getting a good feeling at this point :(
Feelsbad since this is such a nice set.
... People constantly asking for updates ... in the thread is not helpful to the GB at all.
... People constantly asking for updates ... in the thread is not helpful to the GB at all.
excuse me, i think we have a right to ask for an update since the last extension date has come and gone and nobody is reporting number of orders sold and which kits will make moq.
these group buys make me nervous already because there is no paypal protection
Sorry for the late update because I was waiting for response from zFrontier.
The good news is vendors will buy out all child kits including norde. So european buyers can feel free to order now. GB will delay to end of August.
Don't worry about the money, peyment to GMK will not go through me.
If you guys have other questions, I will reply asap :D
What would the estimated delivery time be at this point? Are we still looking at December?
Sorry for the late update because I was waiting for response from zFrontier.
The good news is vendors will buy out all child kits including norde. So european buyers can feel free to order now. GB will delay to end of August.
Don't worry about the money, peyment to GMK will not go through me.
If you guys have other questions, I will reply asap :D
I think it will delay a month, I will confirm this with zFrontier later.What would the estimated delivery time be at this point? Are we still looking at December?
Would like to know this as well
What’s the latest?
Curious to see how samples come out if there are any.Everything goes well, I will update when I get samples.
I already sent my keycaps to GMK for color matching, but haven't got samples back yet.
And it seems like zFrontier is still in contact with GMK and proxies for some order details. They hardly share work progress with me but I will request for more information.
If you want to add more kits, maybe you could try to contact vendors. They will have some extra for sell after delivery.
GMK Triumph Adler 90
zFrontier confirmed that GMK received color samples and that things are moving forward, but GMK is on holiday this week. Their team will be back in the office Monday, November 5th. We will get an update from zFrontier next week.
I already sent my keycaps to GMK for color matching, but haven't got samples back yet.
And it seems like zFrontier is still in contact with GMK and proxies for some order details. They hardly share work progress with me but I will request for more information.
If you want to add more kits, maybe you could try to contact vendors. They will have some extra for sell after delivery.
I already sent my keycaps to GMK for color matching, but haven't got samples back yet.
And it seems like zFrontier is still in contact with GMK and proxies for some order details. They hardly share work progress with me but I will request for more information.
If you want to add more kits, maybe you could try to contact vendors. They will have some extra for sell after delivery.
Can we see some samples before heading into production? Just to prevent anything like the last round to happen again.
Show Image(https://i.imgur.com/d6idkhm.jpg)
Got a photo of samples from GMK! They look great. :thumb:
I will compare samples with original caps once I receive them.
Looks like I'll be ordering a extra set, or one off mm. :thumb: :thumb:Those seem to be a pic of samples from gmk. So we'll have to wait until he receives them to compare to his originals
Do you happen to have the original triumph Adler and original gmk set to compare the three together? Would love to see the difference as I didn't really like the gmk ta last made.
Looks like I'll be ordering a extra set, or one off mm. :thumb: :thumb:Those seem to be a pic of samples from gmk. So we'll have to wait until he receives them to compare to his originals
Do you happen to have the original triumph Adler and original gmk set to compare the three together? Would love to see the difference as I didn't really like the gmk ta last made.
I went to en.zfrontier.com to find that the pre-order link for ta-90 was up. I added the base set and an icon modifier set and checked out. It worked.
So either I've paid for something that is not available (and I'll get a refunded), or I just hopped on board the ta-90 train...
Sent from my Moto G (5) Plus using Tapatalk
Thanks, I'm not so nervous about it so much though. I bought it now because I regret not buying in earlier.
I realise that it might be a mistake on their side, but if it isn't then past experience tells me it will be sold out quickly.
and if it is an error, I've had good experiences with zfrontier in the past - I trust they'll refund me.
Here's to hoping ;)
Looks like I'll be ordering a extra set, or one off mm. :thumb: :thumb:Those seem to be a pic of samples from gmk. So we'll have to wait until he receives them to compare to his originals
Do you happen to have the original triumph Adler and original gmk set to compare the three together? Would love to see the difference as I didn't really like the gmk ta last made.
GMK do have some originals, I don't know why but they are not in this picture.
You've done a great job, Drclick. I'll be on the lookout for extras.
Samples look pretty good! If I were to be super picky, I'd say the alpha colors are very close, but not quite there. If you look at the first picture, specifically focusing on the two alphas on the right that are upside down, you can see that the sample is definitely lighter than the OG. Now whether gmk can darken these up a bit to match the OG color and/or whether the community cares enough to pursue that is another question. I also agree that the white legends look brighter than CP.
You've done a great job, Drclick. I'll be on the lookout for extras.
you can still pre order it on zFrontier https://en.zfrontier.com/products/gmk-ta-90
Was WS1 and CP1 there for reference? Sorry, I'm not that knowledgeable about the pantone colors for OG TA
Looks good btw, looking to pick up extras.
Shipping is said to be in Dec on GH and ZF. Is it still on track or are we adjusting it?
Those samples look great :cool:
Those samples look great :cool:
You look great.
Happy new year!
Sorry for the late reply, GMK said they made a mistake at the machines and they will make sure use 'CP' color in production.
Production will finish in February.
Show Image(https://i.imgur.com/JydOITT.png)
I submitted artwork two weeks ago so this will not delay the progress. :D
Show Image(https://i.imgur.com/JydOITT.png)
I submitted artwork two weeks ago so this will not delay the progress. :D
Show Image(https://i.imgur.com/JydOITT.png)
I submitted artwork two weeks ago so this will not delay the progress. :D
what is our updated shipping timeframe?GMK completed production and shipped all sets to vendors. They should be in your hands pretty soon.
i wonder if zf wil have extras
what is our updated shipping timeframe?GMK completed production and shipped all sets to vendors. They should be in your hands pretty soon.
just another ping for updates
Show Image(https://i.imgur.com/KJS58Lk.jpg)Show Image(https://i.imgur.com/V6c5JYY.jpg)Show Image(https://i.imgur.com/a1wZCmT.jpg)Show Image(https://i.imgur.com/iKCL3Dp.jpg)
Just got mine today! I don't have my TA board at my side right now, but the color looks exactly the same by comparing with samples.
Hope you guys like this set!
Wait, sets are on their way to zF right? :cool:zF shipped all chinese orders and other asian orders will be shipped soon.
Wait, sets are on their way to zF right? :cool:zF shipped all chinese orders and other asian orders will be shipped soon.
Just get shipping notification from Zf! Yay!Yep, me too! Really excited!
I am little bit confused why EU "TA 90" orders are not shipping. Usually it should be the case because it's where GMK is.
I am little bit confused why EU "TA 90" orders are not shipping. Usually it should be the case because it's where GMK is.
That's weird, pikku-allu said he got his spacebars two weeks ago, but I haven't seen any base kit pics from EU buyers.
And I noticed that white is still light.(https://i.imgur.com/sCJUzCI.jpg)
Did the white legend color code change go well?
To me it looks like WS1, not CP.
Is Kono supposed to get extras? I neeeed this set..
Is Kono supposed to get extras? I neeeed this set..
You can get extras from zfrontier (https://en.zfrontier.com/collections/keysets/products/gmk-ta-90).
Looks gorgeous! Shipping from zFrontier was really fast!! Thanks Dr. ****!Show Image(https://uploads.tapatalk-cdn.com/20190317/1cfefb80db5d39d789a216f50d4d4261.jpg)
Sent from my iPad using Tapatalk
ne kono updates avail? or are they still stuck in their warehouse?
ne kono updates avail? or are they still stuck in their warehouse?
Haven't heard anything but their weekly update last week https://kono.store/pages/weekly-update
Which just says "GMK TA90 sets are now being fulfilled"
Got mine a few minutes ago...AWESOME !!!!!!!Got any pics of the 1800 yet? ;)
I guess, I'm not going to sleep today...must build my TX1800! :D
Unfortunately, no…this is my first build, so I’m extra finicky about every detail…and lubing 105 switches is more work than expected :rolleyes:Got mine a few minutes ago...AWESOME !!!!!!!Got any pics of the 1800 yet? ;)
I guess, I'm not going to sleep today...must build my TX1800! :D
Sent from my Moto G (5) Plus using Tapatalk
Unfortunately, no…this is my first build, so I’m extra finicky about every detail…and lubing 105 switches is more work than expected :rolleyes:Got mine a few minutes ago...AWESOME !!!!!!!Got any pics of the 1800 yet? ;)
I guess, I'm not going to sleep today...must build my TX1800! :D
hope to finish the board on the weekend ;D
Unfortunately, no…this is my first build, so I’m extra finicky about every detail…and lubing 105 switches is more work than expected :rolleyes:Got mine a few minutes ago...AWESOME !!!!!!!Got any pics of the 1800 yet? ;)
I guess, I'm not going to sleep today...must build my TX1800! :D
hope to finish the board on the weekend ;D
I'll wait for yours before I post mine then ;)
Here is mine...not bad for my first build and a great experience! :thumb:
It's gorgeous and a dream to type on (3204 lubed zelios v2, zealpc stabs)
(Attachment Link) (Attachment Link) (Attachment Link)
@RominRonin I showed you mine, now show me yours ^-^
Did anyone get their set from Kono? It’s been weeks since other vendors have started shipping.
Did anyone get their set from Kono? It’s been weeks since other vendors have started shipping.
"GMK TA90 sets are now being fulfilled."
Last update on Kono from two or three weeks agoShow Image(https://media.giphy.com/media/H6KRGhgRMbBwA/giphy.gif)
Unfortunately, no…this is my first build, so I’m extra finicky about every detail…and lubing 105 switches is more work than expected :rolleyes:Got mine a few minutes ago...AWESOME !!!!!!!Got any pics of the 1800 yet? ;)
I guess, I'm not going to sleep today...must build my TX1800! :D
hope to finish the board on the weekend ;D
I'll wait for yours before I post mine then ;)
Chicken! :p
Here is mine...not bad for my first build and a great experience! :thumb:
It's gorgeous and a dream to type on (3204 lubed zelios v2, zealpc stabs)
(Attachment Link) (Attachment Link) (Attachment Link)
@RominRonin I showed you mine, now show me yours ^-^
Bummer that you had to mix 1.5u R5 and 1.25u R4.Unfortunately, no…this is my first build, so I’m extra finicky about every detail…and lubing 105 switches is more work than expected :rolleyes:Got mine a few minutes ago...AWESOME !!!!!!!Got any pics of the 1800 yet? ;)
I guess, I'm not going to sleep today...must build my TX1800! :D
hope to finish the board on the weekend ;D
I'll wait for yours before I post mine then ;)
Chicken!
Here is mine...not bad for my first build and a great experience! :thumb:
It's gorgeous and a dream to type on (3204 lubed zelios v2, zealpc stabs)
(Attachment Link) (Attachment Link) (Attachment Link)
@RominRonin I showed you mine, now show me yours ^-^
Very nice indeed.
Here are a couple of shots of mine - I usually make more effort, but I don't have my SLR camera right now...
lubed, retooled blacks, TKC1800 PCB.
The case is a little on the yellow side, so it's not the best, best fit. It doesn't take away from the gorgeous colour of the TA 90 though imo.Show Image(https://i.imgur.com/7Cxq5Id.jpg?1)Show Image(https://i.imgur.com/HdZUOiI.jpg)Show Image(https://i.imgur.com/7BouLXn.jpg)
Bummer that you had to mix 1.5u R5 and 1.25u R4.Unfortunately, no…this is my first build, so I’m extra finicky about every detail…and lubing 105 switches is more work than expected :rolleyes:Got mine a few minutes ago...AWESOME !!!!!!!Got any pics of the 1800 yet? ;)
I guess, I'm not going to sleep today...must build my TX1800! :D
hope to finish the board on the weekend ;D
I'll wait for yours before I post mine then ;)
Chicken!
Here is mine...not bad for my first build and a great experience! :thumb:
It's gorgeous and a dream to type on (3204 lubed zelios v2, zealpc stabs)
(Attachment Link) (Attachment Link) (Attachment Link)
@RominRonin I showed you mine, now show me yours ^-^
Very nice indeed.
Here are a couple of shots of mine - I usually make more effort, but I don't have my SLR camera right now...
lubed, retooled blacks, TKC1800 PCB.
The case is a little on the yellow side, so it's not the best, best fit. It doesn't take away from the gorgeous colour of the TA 90 though imo.Show Image(https://i.imgur.com/7Cxq5Id.jpg?1)Show Image(https://i.imgur.com/HdZUOiI.jpg)Show Image(https://i.imgur.com/7BouLXn.jpg)
I hope Dr**** may consider an add-on kit to remediate this later! GMK Carbon should have R5 molds made for 1.25u keys. And the add-on should also consider adding R4 1.5u and 1u keys
I ordered from the preorder at zFrontier after the buy closed. Has anyone gotten their order for a similar case scenario?
I ordered from the preorder at zFrontier after the buy closed. Has anyone gotten their order for a similar case scenario?
I ordered from the preorder at zFrontier after the buy closed. Has anyone gotten their order for a similar case scenario?
I ordered mine from ZF even after the preorder closed (IN STOCK status, and they changed the price to $195, DHL express shipping incl.) on Monday 3/18 and I received my set on Saturday 3/23.
Yet they still haven't shipped mine :( I ordered weeks ago.
Yet they still haven't shipped mine :( I ordered weeks ago.
That's a bummer. Have you tried contacting ZF regarding your order?
i received mine some time ago. Not the case it will stay on but, good enough for a showcase.
Triumph Adler is truly revived!
Since the alpha colors of TA90 set matches the mao Canoe so well, it will stay on it for ever.
(https://live.staticflickr.com/7852/32664306597_03b4514add_k.jpg) (https://flic.kr/p/RLr7kX)
Since the alpha colors of TA90 set matches the mao Canoe so well, it will stay on it for ever.
(https://live.staticflickr.com/7852/32664306597_03b4514add_k.jpg) (https://flic.kr/p/RLr7kX)
TA 90 (https://flic.kr/p/RLr7kX) by T0mb3ry (https://www.flickr.com/photos/151659186@N03/), auf FlickrShow ImageSince the alpha colors of TA90 set matches the mao Canoe so well, it will stay on it for ever.
(https://live.staticflickr.com/7852/32664306597_03b4514add_k.jpg) (https://flic.kr/p/RLr7kX)
(https://live.staticflickr.com/7836/47606847671_8b80eef48f_k.jpg) (https://flic.kr/p/2fwRxdt)TA 90 close up (https://flic.kr/p/2fwRxdt) by T0mb3ry (https://www.flickr.com/photos/151659186@N03/), auf Flickr
Anyone know if any other GMK sets have the same alpha base color as TA 90?
Anyone know if any other GMK sets have the same alpha base color as TA 90?
It's a custom color, so probably not.