Post by: PainMaster on Mon, 30 October 2017, 11:42:10
(Simple, as is Best. - Compact)
from kbdlab.
- I made it Myself. because I couldn't buy it. -
=========================================================================
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
[attachurl=11]
=========================================================================
> 2018-06-09 Update.
https://geekhack.org/index.php?topic=92333.400
I'm preparing for shipping.
Because, PCB arrived earlier than expected,
I'm glad I got time to check it out.
I'll be Check the PCB today / tomorrow.
shipping is start at 2018/06/13.
[attachimg=9]
[attachimg=10]
- it's black PCB for SaiB
five people haven't confirmed the address yet.
please send me a your paypal email & geekhack nickname & "Approval" by email
(cjakma9422@gmail.com)
- MechanicalElement
- Vloshko
- robotsokk
- Jeff Kim
- forumusername
=========================================================================
> 2018-06-07 Update
The schedule is finally confirmed.
They (factory) send me the PCB on 2018/06/09
I think I'll get it on the 2018/06/12.
From the 2018/06/13, I will send it in the order you approved it.
I see the end...
=========================================================================
> 2018-06-04 Update.
I just talked to Leeku.
The missing part (LED Drive IC) arrived at the factory on 05/31.
PCB Production is due this week.
I think..... I can finally get it !!!!
=========================================================================
> 2018-05-28 Update
To SaiB-CP participants.
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
After packing, it will be sent in the order in which you have "Approval" it.
=========================================================================
> 2018-05-26 Update.
Last confirmation of recipient list.
file Link :
https://drive.google.com/open?id=1X6LprONCibjTFa3LBUAcbAJ8RM1v2PXT
If the recipient has changed or address or 'ANSI or ISO' are different, please PM me.
(I can't change the color.)
This may take a few more days to process such as paypal.
Except for PCB,
Shipping Box, Packaging, Housing, Plates, Screw, etc ...
Everything is ready.
https://imgur.com/rqpTwQg
https://imgur.com/kzygiZr
https://imgur.com/Sgf35nY
PCB was Delay because there are insufficient parts in the factory
The PCB schedule is final confirmed to arrive on Tuesday (5/29).
Everywon won't be any more delay.
For three days from today
Wrap the housing, plate, etc... in a box.
When the PCB arrives on Tuesday, After examining the PCB,
it will be finalized and shipped.
=========================================================================
> 2018-05-23 Update.
The Packing Box & Screw & etc parts arrives 2days left.
Wait a little longer. :)
=========================================================================
> 2018-05-17 Update.
I have just received a SUS Plate for SaiB-CP.
The reason i received it late was because
PCB Production has been delayed for next week, there was no need to receive it urgently.
(Now, PCB Production was complete. But, SMT job will ends next week.)
If i receive PCB sometime next week,
I'll packing everything In two days, May 26, 27
And, I will shipment and shipping Number update everything between May 28 ~ 31.
lastly,
I'm very sorry that your schedule has been delayed
and Really thank you for your patience.
I'll be sure to ship it within May.
=========================================================================
> 2018-05-01 Update.
Hello, Everyone.
I talked to Leeku on the phone last night,
We agreed to produce a PCB by two weeks later.
I will begin shipping between 2018-05-15 and 2018-05-18.
I'm sorry for the delay in shipping.
=========================================================================
> 2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
=========================================================================
> 2018-02-01
Hi everyone ~!
SaiB - CP Alu Housing was arrived last night.
I'm going to do a one month, quality check & Inspection & Defect Modification request from today.
SUS Plate product schedule is Next week.
PCB LogicBoard is Last week of February (expectation)
[attachimg=8]
> 2017-12-16
GB end.
Order to Factory Complete !!!
Next Notifiacation Schedule is 2017/12/30
See you 14 days later~~
> 2017-12-08 GB Schedule update.
introduce GB Schedule. (expectation)
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
> 2017-12-04
We achieved MOQ 20.
10 More ~!! plz.
> 2017-12-01
Now.
PreOrder is Ended.
GB Form Ready & Start ~!!
Google forms : End (https://goo.gl/UTy3kw)
Please , join this !!!!
> 2017-11-28
Oh....My................God
[attachimg=7]
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
> 2017-11-27
PreOrder 375 + 15 = $390
GrupBuy 395 + 37 (Add Insufficient Shipping Cost) + 18 = $450[/color]
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
> 2017-11-26
Sorry I'm Late !!
Google forms : PreOrder Ended
Please , join this !!!!
> 2017-11-14 update
The amount has been adjusted.
Because, the TXBag plan is canceled.
I will let yours know when the next KeyPack plan is confirmed.
> 2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
=========================================================================
> Interest Checks :
2017-10-28 ~ 2017-12-01 (33 days)
> MOQ :
more than 30 (hope)
> PayPal Registration
2017-11-17 (expectation)
=========================================================================
> PreOrder Payment :
2017-11-25 ~ 2017-12-01 (6 days)
Only the deposits within the period are confirm
> PreOrder Pricing:(South Korea customs charge)
$ 390 (Housing Top / Plate / PCB / Housing Bottom)
=========================================================================
> Group Buy Registration
2017-12-01
> Group Buy Schedule :
2017-12-01 ~ 2018-04-01
> Group Buy Payment :
2017-12-02 ~ 2017-12-15 (14 days)
> Group buy Pricing:(South Korea customs charge)
$ 450 (Housing Top / Plate / PCB / Housing Bottom)
---------------------------------------------------------------
> Component
Housing : Aluminium Top & Bottom 2 piece(7 degrees angle, Weight 3.4kg)
Plate : STS Only (Laser)
Logic Board : Leeku L3 - Compact (Full SMT : not include switches)
Etc : Bolt, Bottom Pad,
Housing Color : Black, TitanGray, Silver
> Shipping Estimate:
Shipping cost will depend on your location.
Each set weighs about 3.03 kg with packaging.
Click here to check your zone (http://eng.koreapost.go.kr/eng/sub/subpage.jsp?contId=e1010601)
Click here to check their prices in Korean Won (http://eng.koreapost.go.kr/eng/sub/subpage.jsp?contId=e1020300)
>
Order quantity : 2 ea
Color : Black 1, TitanGray 1
> Order Changes:
Please DO NOT PM me for changes
> Sample Photos :
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
[attachimg=6]
Mod Edit: Changed subject from [IC] to [GB].
Post by: packman86 on Mon, 30 October 2017, 11:46:52
Post by: shadowrealmwarez on Mon, 30 October 2017, 11:53:51
Post by: Puddsy on Mon, 30 October 2017, 12:06:17
Post by: frostbyte-gaming on Mon, 30 October 2017, 12:14:27
Post by: packman86 on Mon, 30 October 2017, 12:19:07
Those bezels definitely give it a beefier look without being too in your face. Gives me the old simple yet rugged look really like it. :thumb:
Exactly! Perfect amount of compact and retro look. I am really looking forward to seeing the gray and silver versions.
Post by: PleaseBeMyFriend on Mon, 30 October 2017, 16:59:07
Post by: get_weird on Mon, 30 October 2017, 18:00:56
Post by: poolside on Mon, 30 October 2017, 19:35:19
Is there a thin spacer between the top and bottom or is it just light bouncing off the chamfers at the seam?
Post by: Trente on Mon, 30 October 2017, 20:16:15
Post by: OmegaSupreme on Mon, 30 October 2017, 22:02:45
To the veterans here, is this a reputable GB runner?
Post by: Puddsy on Tue, 31 October 2017, 01:13:32
I am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
Never seen him before, but with a 4 month production time, if anything goes awry you'll have plenty of time on paypal protection.
I'll ask my Korean friends.
Post by: OmegaSupreme on Tue, 31 October 2017, 02:55:43
I am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
Never seen him before, but with a 4 month production time, if anything goes awry you'll have plenty of time on paypal protection.
I'll ask my Korean friends.
That’s true. However you know how these group buys go. 4 months can turn to 8 months fairly quickly.
If it was a well known GB runner I would give them the benefit of the doubt and I wouldn’t necessarily want to start the dispute process and tie up his/her funds and delay everyone else further.
Now if it was a unknown runner than yeah I would definitely utilize the dispute mechanism.
Thanks for checking Puddsy!
Post by: eyedrop on Tue, 31 October 2017, 11:28:37
Post by: dubious on Tue, 31 October 2017, 12:33:48
I am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
OP hasn't run a groupbuy before in geekhack, but is a reputable member of kbdlab. I'd vouch for him :thumb:
Like all groupbuys, some delays are unavoidable.
Post by: Puddsy on Tue, 31 October 2017, 13:05:13
Hello IBM, nice work! Does it come with the IBM logo? :pI am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
OP hasn't run a groupbuy before in geekhack, but is a reputable member of kbdlab. I'd vouch for him :thumb:
Like all groupbuys, some delays are unavoidable.
Yeah, from speaking to my friends on KBDlab, this guy is fairly reputable.
Post by: eyedrop on Tue, 31 October 2017, 13:15:45
Is that what it means?
Or the GB buying stage is open for that long? If not, how long will the GB be open for?
Post by: OmegaSupreme on Tue, 31 October 2017, 13:18:54
Hello IBM, nice work! Does it come with the IBM logo? :pI am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
OP hasn't run a groupbuy before in geekhack, but is a reputable member of kbdlab. I'd vouch for him :thumb:
Like all groupbuys, some delays are unavoidable.
Yeah, from speaking to my friends on KBDlab, this guy is fairly reputable.
Thanks for the reassurance dubious and Puddsy!
Post by: PainMaster on Tue, 31 October 2017, 20:20:50
if i support a sticker, Is there any license problem?
Hello IBM, nice work! Does it come with the IBM logo? :pI am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
OP hasn't run a groupbuy before in geekhack, but is a reputable member of kbdlab. I'd vouch for him :thumb:
Like all groupbuys, some delays are unavoidable.
Post by: xondat on Tue, 31 October 2017, 20:33:51
고마워 dubious !! thankyou ~!!
if i support a sticker, Is there any license problem?Hello IBM, nice work! Does it come with the IBM logo? :pI am very interested but I am fairly new here.
To the veterans here, is this a reputable GB runner?
OP hasn't run a groupbuy before in geekhack, but is a reputable member of kbdlab. I'd vouch for him :thumb:
Like all groupbuys, some delays are unavoidable.
Probably be best to avoid it, but I doubt IBM would chase if you used a licensed sticker or so.
Post by: wholypantalones on Tue, 31 October 2017, 20:42:08
Post by: PainMaster on Thu, 02 November 2017, 00:28:42
first, This groupbuy is will be supported by the VE.A team.
second, This CP was completed with the advice of duck0113.
Post by: Puddsy on Thu, 02 November 2017, 01:32:15
first, This groupbuy is will be supported by the VE.A team.
Yay!
Quote
second, This CP was completed with the advice of duck0113.
Will this be manufactured by the same factory as other duck boards?
Post by: PainMaster on Thu, 02 November 2017, 01:37:42
Post by: Puddsy on Thu, 02 November 2017, 01:55:10
this be manufactured by the same factory as VE.A
Lovely. Thanks!
Post by: wodan on Thu, 02 November 2017, 04:44:22
Are TX bags included in the price or is the an additional charge for them?
Great to see so many big names of the Korean community working together!
Post by: _rubik on Sun, 05 November 2017, 21:56:27
Post by: crtexcnndrm99 on Tue, 07 November 2017, 07:26:51
Sent from my iPad using Tapatalk
Post by: dubious on Tue, 07 November 2017, 12:40:43
Will this kit use the existing Leeku L3 CP PCB or is this a new Leeku PCB design?
Are TX bags included in the price or is the an additional charge for them?
Great to see so many big names of the Korean community working together!
PCB is Leeku L3 CP, not sure on the bags sry
The price is stated as for a MOQ of 30, does that mean there will be only 30 spots or, alternatively, that the price could be lower if there is a larger number ordered?
Sent from my iPad using Tapatalk
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
Post by: PainMaster on Wed, 08 November 2017, 22:55:05
PS 1 :
Really Thank you "dubious", for your kind explanation.
PS 2 :
I am studying very hard.
To communicate with yours.
Post by: ihalatch on Thu, 09 November 2017, 06:27:12
Post by: ihalatch on Thu, 09 November 2017, 06:32:09
Post by: OmegaSupreme on Thu, 09 November 2017, 13:33:56
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
Post by: poolside on Thu, 09 November 2017, 15:20:24
Post by: crtexcnndrm99 on Thu, 09 November 2017, 15:38:18
Sent from my iPad using Tapatalk
Post by: Puddsy on Thu, 09 November 2017, 15:41:04
About a week to go. A few more pics (side shots) here: http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=4&document_srl=4781105 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=4&document_srl=4781105)
it's a wedge
i like it
Post by: crtexcnndrm99 on Thu, 09 November 2017, 15:44:56
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
+1
How will we get that the opportunity to preorder? Google doc form? Subscribe to an email list? Give up now because there is no hope of getting in? Thanks ;)
Sent from my iPad using Tapatalk
Post by: PainMaster on Thu, 09 November 2017, 20:05:40
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
+1
How will we get that the opportunity to preorder? Google doc form? Subscribe to an email list? Give up now because there is no hope of getting in? Thanks ;)
Sent from my iPad using Tapatalk
I'm going to google Poll.
Post by: Trente on Thu, 09 November 2017, 20:31:27
Post by: PainMaster on Thu, 09 November 2017, 20:38:59
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
Post by: crtexcnndrm99 on Thu, 09 November 2017, 20:57:43
Sent from my iPad using Tapatalk
Post by: _rubik on Thu, 09 November 2017, 21:08:38
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
Jesus...You have my attention. Do tell!
Post by: OmegaSupreme on Thu, 09 November 2017, 21:45:20
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
+1
How will we get that the opportunity to preorder? Google doc form? Subscribe to an email list? Give up now because there is no hope of getting in? Thanks ;)
Sent from my iPad using Tapatalk
I'm going to google Poll.
In terms of max quantity available, is it 30 or more?
Post by: MechanicalElement on Thu, 09 November 2017, 22:06:28
Post by: ihalatch on Thu, 09 November 2017, 22:11:17
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
+1
How will we get that the opportunity to preorder? Google doc form? Subscribe to an email list? Give up now because there is no hope of getting in? Thanks ;)
Sent from my iPad using Tapatalk
I'm going to google Poll.
Please, meet the demand. Are going to do it?
Post by: avid on Thu, 09 November 2017, 22:16:51
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
:D :D :thumb: :thumb:
Do you have pictures of the case unbuilt? Of bottom?
Is 30 units for GH or is it 30 in total for korea + GH?
Post by: PainMaster on Thu, 09 November 2017, 22:42:21
Only 30 units will be produced? Damn, I knew it was too good ... with my luck I'll never own one :(
i hope 30+ ... really.
Post by: Trente on Thu, 09 November 2017, 22:43:30
MOQ 30 is the minimum amount of keyboards that need to be payed for, in order for the manufacturer to begin production. Sometimes, MOQ is also the total number of keyboards that will be produced. I believe this group buy is limited to about 30, and the price wont drop.
The OP stated that there is "pre-order" pricing for the buy as well. That leads me to believe there might be more than 30 available? Is this correct?
I mean if it's limited to 30 why even offer preorder pricing when there is a very high chance it will be sold out anyways. Well that's my logic anyways.
Either way, I hope I can snag one!
+1
How will we get that the opportunity to preorder? Google doc form? Subscribe to an email list? Give up now because there is no hope of getting in? Thanks ;)
Sent from my iPad using Tapatalk
I'm going to google Poll.
Please, meet the demand. Are going to do it?
WOOOO THESE SOUNDS GREAT! DEFINITELY IN
Post by: PainMaster on Thu, 09 November 2017, 22:47:53
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
:D :D :thumb: :thumb:
Do you have pictures of the case unbuilt? Of bottom?
Is 30 units for GH or is it 30 in total for korea + GH?
unbuilt pictures.
MOQ is in total for korea + GH
I hope more than 30
Post by: OmegaSupreme on Thu, 09 November 2017, 22:49:30
Well RIP my chance of actually owning this :(
Post by: crtexcnndrm99 on Thu, 09 November 2017, 22:51:29
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
:D :D :thumb: :thumb:
Do you have pictures of the case unbuilt? Of bottom?
Is 30 units for GH or is it 30 in total for korea + GH?
unbuilt pictures.
MOQ is 30 in total for korea + GH
This looks just too good. But a total of 30?! :’(
Sent from my iPad using Tapatalk
Post by: PainMaster on Thu, 09 November 2017, 22:54:11
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
sorry.
I have a problem with my communication.
I hope more than 30
Post by: packman86 on Thu, 09 November 2017, 23:34:17
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
:D :D :thumb: :thumb:
Do you have pictures of the case unbuilt? Of bottom?
Is 30 units for GH or is it 30 in total for korea + GH?
unbuilt pictures.
MOQ is in total for korea + GH
I hope more than 30
These images are making me very excited.
Are you going to post images of what the different colored cases are going to look like?
Post by: PainMaster on Thu, 09 November 2017, 23:46:44
Actually I am very interested in what this keyset is in the sample picture, looks very nice
I made it Myself.
it needs 6 GMK KeySets.
:D :D :thumb: :thumb:
Do you have pictures of the case unbuilt? Of bottom?
Is 30 units for GH or is it 30 in total for korea + GH?
unbuilt pictures.
MOQ is in total for korea + GH
I hope more than 30
These images are making me very excited.
Are you going to post images of what the different colored cases are going to look like?
Unfortunately, I have not yet prepared another color.
It is scheduled to be confirmed before production by 2018's January.
Post by: OmegaSupreme on Thu, 09 November 2017, 23:49:04
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
sorry.
I have a problem with my communication.
I hope more than 30
Oh so your saying your taking as many orders as possible?
Post by: PainMaster on Fri, 10 November 2017, 00:02:58
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
sorry.
I have a problem with my communication.
I hope more than 30
Oh so your saying your taking as many orders as possible?
Yub. !
Post by: OmegaSupreme on Fri, 10 November 2017, 00:04:24
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
sorry.
I have a problem with my communication.
I hope more than 30
Oh so your saying your taking as many orders as possible?
Yub. !
Phew! That’s a relief!
Thank you!
Post by: crtexcnndrm99 on Fri, 10 November 2017, 00:13:25
MOQ 30 in total for GH and Korea?
Well RIP my chance of actually owning this :(
sorry.
I have a problem with my communication.
I hope more than 30
Oh so your saying your taking as many orders as possible?
Yub. !
Thank you! :D
Sent from my iPad using Tapatalk
Post by: dubious on Fri, 10 November 2017, 00:21:02
The price is stated as for a MOQ of 30, does that mean there will be only 30 spots or, alternatively, that the price could be lower if there is a larger number ordered?
Sent from my iPad using Tapatalk
yayaya 30+ spots
If you preorder during the IC phase (e.g. by posting " Order quantity: 1 Color: Black 1") the cost is $400. Group buy price is $420.
The first 30 orders get the TX bag included in the preorder/group buy price.
Sorry, TX bags were mislisted
Post by: OmegaSupreme on Fri, 10 November 2017, 00:26:10
The price is stated as for a MOQ of 30, does that mean there will be only 30 spots or, alternatively, that the price could be lower if there is a larger number ordered?
Sent from my iPad using Tapatalk
If you preorder during the IC phase (e.g. by posting " Order quantity: 1 Color: Black 1") the cost is $400. Group buy price is $420.
The first 30 orders get the TX bag included in the preorder/group buy price.
After the first 30 orders, you can buy a TX bag for $25. However, the order for the TX bags are still being worked on, and if they can't be purchased you will be refunded $25
EDIT: Sorry, unfortunately, I will need to drop out of this buy.
Thanks for the clarification.
And in that case here is my order:
Hope I’m doing this right.
Post by: HTN47 on Fri, 10 November 2017, 01:17:04
Order quantity : 1
Color : Black
Post by: ihalatch on Fri, 10 November 2017, 01:40:20
Order quantity : 1
Color: Titanium Gray
Post by: amnesia0287 on Fri, 10 November 2017, 02:04:10
Order quantity : 1
Color: Titan Grey
Post by: poolside on Fri, 10 November 2017, 02:21:24
Order quantity : 1
Color: Titanium Grey
By the way, this board will be getting a weight? One of the pictures shows a weight cutout.
Post by: crtexcnndrm99 on Fri, 10 November 2017, 02:35:44
Order quantity: 1
Color: TitanGray
Sent from my iPhone using Tapatalk
Post by: papedahut on Fri, 10 November 2017, 03:14:52
Order quantity: 1
Color: titanium grey
Thank you
Post by: wholypantalones on Fri, 10 November 2017, 05:10:26
Color: TitanGray
Post by: frostbyte-gaming on Fri, 10 November 2017, 06:42:25
Order quantity: 1
Color: black
Post by: OmegaSupreme on Fri, 10 November 2017, 08:53:14
I'm in too.
Order quantity : 1
Color: Black
Damn Amnesia, it seems like your in all of the group buys haha.
I gotta see a pic of your collection some day!
Post by: packman86 on Fri, 10 November 2017, 09:30:01
Order quantity: 1
Color:
Post by: Unforgivable on Fri, 10 November 2017, 09:42:09
Order quantity: 1
Color: Titan Gray
Do you have any pictures of the internals? :)
Any chance aluminum or brass plates will be offered? I noticed steel is the only option. :(
Post by: avid on Fri, 10 November 2017, 10:37:29
Post by: bthezebra on Fri, 10 November 2017, 10:57:31
Color: black
Sent from my SM-G900V using Tapatalk
Post by: eyedrop on Fri, 10 November 2017, 10:58:55
Order quantity: 1
Color: Titanium Gray
Post by: OmegaSupreme on Fri, 10 November 2017, 11:07:44
I hope not or at least hope there is a no diffuser option as this would be a perfect nondescript work board!
Post by: amnesia0287 on Fri, 10 November 2017, 13:12:50
I'm in too.
Order quantity : 1
Color: Black
Damn Amnesia, it seems like your in all of the group buys haha.
I gotta see a pic of your collection some day!
Right now I just have a tada68 an Anne Pro and a zeal 60 in a Klippe i built. I do have a ****ton of GMK sets tho lol. Basically I got into keyboards a while ago, back when Ivan screwed us all on Miami Nights, but then I slacked off for a long time, so now I’m playing catch up. I was very annoyed that I couldn’t just buy a nice keyboard without paying like 700 on the used market or waiting forever, so I’ve just been buying everything I want to build a collection. Now in 3-4 months the collection will be a bit deeper lol.
I’m not even sure this one will be for me, though. There is a 50% chance I will be using this as a gift for one of my friends. He would never buy himself a nice keyboard cause he’s too good to his kids(he could totally afford it’s), so I ordered him a set of SA carbon, I’m tempted to use this as the board for that and try and make him cry :P. Mostly just depends if I find something else I’d rather use between now and whenever carbon someday eventually ships.
Post by: OmegaSupreme on Fri, 10 November 2017, 13:26:30
Post by: aznreaper on Fri, 10 November 2017, 17:15:55
Order quantity:1
Colour: Black
Post by: bminhz on Fri, 10 November 2017, 19:31:16
Order quantity : 1
Color: Black
Post by: ihalatch on Fri, 10 November 2017, 20:16:48
Post by: wholypantalones on Fri, 10 November 2017, 20:24:16
Black or titan gray keyboard with a GMK Dolch set, any suggestions?
Dolch looks good on any color imo. Titan gray would look amazing though.
Post by: ihalatch on Fri, 10 November 2017, 20:26:11
Black or titan gray keyboard with a GMK Dolch set, any suggestions?
Dolch looks good on any color imo. Titan gray would look amazing though.
Thanks.
Post by: amnesia0287 on Fri, 10 November 2017, 21:29:21
You're an amazing friend! Hope he appreciates it!
Do you think Black or Grey would go better with Carbon anyway? I didn't really think about it, I just normally always prefer black, but if its not for me lol.
Post by: avid on Fri, 10 November 2017, 21:33:04
You're an amazing friend! Hope he appreciates it!
Do you think Black or Grey would go better with Carbon anyway? I didn't really think about it, I just normally always prefer black, but if its not for me lol.
Anything grey-based will look better on a grey case. Skidata,terminal,carbon,dolch.
Set with deep colors, such as nautilus, laser, skeletor etc will look better on a black.
But overall grey is more versatile. Beige kits go well on grey but not so much on black.
Post by: OmegaSupreme on Fri, 10 November 2017, 21:47:17
You're an amazing friend! Hope he appreciates it!
Do you think Black or Grey would go better with Carbon anyway? I didn't really think about it, I just normally always prefer black, but if its not for me lol.
Anything grey-based will look better on a grey case. Skidata,terminal,carbon,dolch.
Set with deep colors, such as nautilus, laser, skeletor etc will look better on a black.
But overall grey is more versatile. Beige kits go well on grey but not so much on black.
I agree with avid. Definitely go with grey for carbon.
I was debating Grey or black as well as I was going to put ocean dolch on it. But settled with black just for the fact that I’m hoping to get a grey tx cp and also because I have seen ocean dolch on black boards and it looks pretty good to me.
Post by: eyedrop on Fri, 10 November 2017, 23:02:43
You're an amazing friend! Hope he appreciates it!
Do you think Black or Grey would go better with Carbon anyway? I didn't really think about it, I just normally always prefer black, but if its not for me lol.
Anything grey-based will look better on a grey case. Skidata,terminal,carbon,dolch.
Set with deep colors, such as nautilus, laser, skeletor etc will look better on a black.
But overall grey is more versatile. Beige kits go well on grey but not so much on black.
I agree with avid. Definitely go with grey for carbon.
I was debating Grey or black as well as I was going to put ocean dolch on it. But settled with black just for the fact that I’m hoping to get a grey tx cp and also because I have seen ocean dolch on black boards and it looks pretty good to me.
Nice, this and the TX-CP. I would love to get a TX-CP too. But I guess this will do for now. :)
Post by: cocobrais on Sat, 11 November 2017, 01:37:27
TX bag is $25? In my understanding, TX bag is $30. If you have some base about this price, please let me know. I don't understand this price. I think that $30 for this bag is very low price.The price is stated as for a MOQ of 30, does that mean there will be only 30 spots or, alternatively, that the price could be lower if there is a larger number ordered?
Sent from my iPad using Tapatalk
yayaya 30+ spots
If you preorder during the IC phase (e.g. by posting " Order quantity: 1 Color: Black 1") the cost is $400. Group buy price is $420.
The first 30 orders get the TX bag included in the preorder/group buy price.
After the first 30 orders, you can buy a TX bag for $25. However, the order for the TX bags are still being worked on, and if they can't be purchased you will be refunded $25
Post by: PainMaster on Sat, 11 November 2017, 04:23:37
I'm trying to find other bags or method.
Post by: OmegaSupreme on Sat, 11 November 2017, 12:48:17
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
That’s too bad :(
Looking forward to what else you come up with.
Post by: packman86 on Sat, 11 November 2017, 12:49:26
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Its all good.
Post by: trikoi00 on Sun, 12 November 2017, 07:43:57
Order quantity:1
Colour: Titanium Grey
Post by: robotsokk on Sun, 12 November 2017, 14:21:21
Order quantity : 1
Color : TitanGray
Post by: MechanicalElement on Mon, 13 November 2017, 11:27:04
Quantity: 1
Colour: Black
Post by: Melanic on Mon, 13 November 2017, 20:40:54
Post by: PainMaster on Mon, 13 November 2017, 23:49:01
One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Post by: PainMaster on Mon, 13 November 2017, 23:52:50
I will let yours know when the next KeyPack plan is confirmed.
Post by: PainMaster on Mon, 13 November 2017, 23:55:11
Will ISO be supported? I see there is no cutout in your plate, but not sure if thats final version.
Yub. ISO supported plate are available.
Post by: ihalatch on Tue, 14 November 2017, 00:31:10
Post by: crtexcnndrm99 on Tue, 14 November 2017, 03:54:06
What is ‘KeyPack’ though?
Sent from my iPhone using Tapatalk
Post by: Melanic on Tue, 14 November 2017, 09:45:54
Okay, I'm in.
Order quantity : 1
Color : Black
Post by: Niz8sauce on Tue, 14 November 2017, 12:35:52
Order quantity: 2
Color : 2 Black
Post by: poolside on Tue, 14 November 2017, 15:28:49
One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Arrgh, no weight plate? :'(
Or is that only for the prototype?
Post by: Puddsy on Tue, 14 November 2017, 15:31:59
One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Arrgh, no weight plate? :'(
Or is that only for the prototype?
I think he's saying he's gonna do it like duck, where you can add a weight later.
Post by: PainMaster on Tue, 14 November 2017, 20:00:05
One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Arrgh, no weight plate? :'(
Or is that only for the prototype?
I think he's saying he's gonna do it like duck, where you can add a weight later.
that's right !!
Post by: PainMaster on Tue, 14 November 2017, 20:09:44
Achieved 20 !!
Thx. Everyone.
Post by: packman86 on Tue, 14 November 2017, 22:54:32
Yeh ~!!!Congratulations!
Achieved 20 !!
Thx. Everyone.
Can't wait to get this!
Post by: crtexcnndrm99 on Tue, 14 November 2017, 23:42:15
Sent from my iPhone using Tapatalk
Post by: Badmotorfinger on Tue, 14 November 2017, 23:46:45
Quantity: 1
Color: TitanGray
Sent from my iPhone using Tapatalk
Post by: PainMaster on Wed, 15 November 2017, 01:38:40
Yeh ~!!!Congratulations!
Achieved 20 !!
Thx. Everyone.
Can't wait to get this!
as fast as possible,
and, exactly
I want to send it.
Wait a few months dude.
Post by: poolside on Wed, 15 November 2017, 16:48:35
Arrgh, no weight plate? :'(One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Or is that only for the prototype?
I think he's saying he's gonna do it like duck, where you can add a weight later.
that's right !!
Thanks. Will you run a mini group buy for these wooden "weight" plates too?
Post by: crtexcnndrm99 on Wed, 15 November 2017, 18:51:17
Arrgh, no weight plate? :'(One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...
the bottom insert/weight plate was not support.
but, I'll open the plate CAD document.
Use it with pleasure.
in my case, I am going to make a Wooden board.
Or is that only for the prototype?
I think he's saying he's gonna do it like duck, where you can add a weight later.
that's right !!
Thanks. Will you run a mini group buy for these wooden "weight" plates too?
The IBM sticker on the front of the board in the pictures looks nice. Maybe a GB for a weight that is engraved to look like the plaques on the back of an IBM/Cherry board (IBM logo, 'made in __' etc.) could be cool?
Post by: NastyRabbit on Thu, 16 November 2017, 05:47:16
Quantity 1
Colour : Black
Post by: PainMaster on Fri, 17 November 2017, 09:38:54
Google Poll creating...
Post by: wholypantalones on Fri, 17 November 2017, 18:54:25
Paypal account created success.
Google Poll creating...
Take your time, wallet broken. Waiting for reboot..
Post by: doom2 on Tue, 21 November 2017, 23:31:32
Sent from my Pixel XL using Tapatalk
Post by: packman86 on Wed, 22 November 2017, 18:30:28
I'm in.Order quantity: 1Color: TitanGray Silver
I have to pull out. Purchased a TX-CP instead.
Post by: PainMaster on Thu, 23 November 2017, 00:41:35
Post by: ihalatch on Sat, 25 November 2017, 22:14:21
Post by: PainMaster on Sat, 25 November 2017, 22:55:00
Invoices?
Sorry my home network error since last friday.
Now modifying.
Wait a hours. T^T
Post by: MandrewDavis on Sat, 25 November 2017, 23:39:06
Post by: PainMaster on Sun, 26 November 2017, 01:07:11
Sorry for the tardiness, am I still able to join?
able. :)
Post by: PainMaster on Sun, 26 November 2017, 01:07:52
I'm Late !!
Google forms : PreOrder Ended
Please , join this !!!!
Post by: aznreaper on Sun, 26 November 2017, 01:13:53
Post by: PainMaster on Sun, 26 November 2017, 01:19:53
Just a few question before I submit my form, do we need to state anywhere if we've preordered? Also, what is complex colours and when are invoices going to be due?
PreOrder will end on November 30th.
However, I will give more opportunities to those who have join comment until November 30th.
complex colours is about "MIX"
for example, top black, bottom silver.
invoices due Date is 2018-04-01 (expect)
Post by: amnesia0287 on Sun, 26 November 2017, 01:49:32
Just a few question before I submit my form, do we need to state anywhere if we've preordered? Also, what is complex colours and when are invoices going to be due?
PreOrder will end on November 30th.
However, I will give more opportunities to those who have join comment until November 30th.
complex colours is about "MIX"
for example, top black, bottom silver.
invoices due Date is 2018-04-01 (expect)
Wait, invoices aren’t due until April? Or is that supposed to be Jan 04 2018? Or something else lol.
Post by: Puddsy on Sun, 26 November 2017, 01:51:06
Post by: crtexcnndrm99 on Sun, 26 November 2017, 02:01:43
Sent from my iPhone using Tapatalk
Post by: ihalatch on Sun, 26 November 2017, 02:26:23
Post by: PainMaster on Sun, 26 November 2017, 02:50:07
I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?
I already to explain this in main description. :)
PreOrder (~11/30) = $ 375 (Top / Bottom / Plate / PCB / Shipping)
GroupBuy (12/01~) = $ 395 (Top / Bottom / Plate / PCB / Shipping)
Post by: amnesia0287 on Sun, 26 November 2017, 03:00:36
I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?
I already to explain this in main description. :)
PreOrder (~11/30) = $ 375 (Top / Bottom / Plate / PCB / Shipping)
GroupBuy (12/01~) = $ 395 (Top / Bottom / Plate / PCB / Shipping)
He’s confused because with most GB, after filling out the form, the GB Runner usually sends invoices for the order and that is what people pay.
It’s not normally just a link.
Post by: PainMaster on Sun, 26 November 2017, 03:03:26
I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?
I already to explain this in main description. :)
PreOrder (~11/30) = $ 375 (Top / Bottom / Plate / PCB / Shipping)
GroupBuy (12/01~) = $ 395 (Top / Bottom / Plate / PCB / Shipping)
He’s confused because with most GB, after filling out the form, the GB Runner usually sends invoices for the order and that is what people pay.
It’s not normally just a link.
Ah .... ok. isee
I'll prepare an invoice.
Post by: crtexcnndrm99 on Sun, 26 November 2017, 03:52:32
Post by: MechanicalElement on Sun, 26 November 2017, 09:59:31
Post by: infiniti on Sun, 26 November 2017, 10:18:21
Also, as a reminder to all, CAVEAT EMPTOR (https://geekhack.org/index.php?topic=36773.0) :triangle:
GLWGB! :thumb:
Post by: wholypantalones on Sun, 26 November 2017, 10:20:41
Quote
Housing Top / Plate / PCB / Housing Bottom) + Shipping Estimate
Is the pre order price including shipping or is it separate from the pre order price?
Any estimate on production / shipping time?
Post by: ye_cole on Sun, 26 November 2017, 12:43:14
We can request custom colors?
Post by: OmegaSupreme on Sun, 26 November 2017, 12:48:11
What do you mean by more complex colors?
We can request custom colors?
He said that hat was for people that want a different top and bottom colour.
Titan grey, black and silver are the only colours available.
Post by: Puddsy on Sun, 26 November 2017, 12:48:46
Post by: poolside on Sun, 26 November 2017, 13:30:09
Paypal account created success.
Google Poll creating...
Have you made sure that PayPal won't freeze your account during this group buy?
Post by: wholypantalones on Sun, 26 November 2017, 15:34:07
In! Waiting for the invoice too :thumb:Paypal account created success.
Google Poll creating...
Have you made sure that PayPal won't freeze your account during this group buy?
This is the most important question.
Post by: Puddsy on Sun, 26 November 2017, 15:44:18
Post by: OmegaSupreme on Sun, 26 November 2017, 15:49:08
Especially for a new account this might most likely happen either way.
Post by: cocobrais on Sun, 26 November 2017, 18:29:17
Doesn’t Paypal put the money on hold either way after a certain amount of time and no proof of shipment is provided?I don't know that paypal will hold or not, but my opinion is
Especially for a new account this might most likely happen either way.
At least GB runner has to be able to absorb the risk in this situation.
In ase of the my friend LZ absorbed this risk in last lz cls GB and this is basic rule of gb runner.
I also considered this risk in my GB.
I hope that he also.
Post by: aznreaper on Sun, 26 November 2017, 19:22:49
I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?
I already to explain this in main description. :)
PreOrder (~11/30) = $ 375 (Top / Bottom / Plate / PCB / Shipping)
GroupBuy (12/01~) = $ 395 (Top / Bottom / Plate / PCB / Shipping)
He’s confused because with most GB, after filling out the form, the GB Runner usually sends invoices for the order and that is what people pay.
It’s not normally just a link.
Ah .... ok. isee
I'll prepare an invoice.
Can you just confirm if you'll be sending out invoices for everyone, or if you still want us to pay through the link?
Post by: Puddsy on Sun, 26 November 2017, 22:19:14
Post by: PainMaster on Mon, 27 November 2017, 01:24:38
It was too busy.
I am sorry to have neglected communication.
wholypantalones: PreOrder prices include shipping prices.
Production is expected to finish on the last day of 2018/02
& Shipping is expected to finish on the last day of 2018/03
poolside: There seems to be no problem with paypal.
Someone has already deposited money. :)
Post by: eyedrop on Mon, 27 November 2017, 01:37:49
And do we fill out the Google form? There is a link on the top of the form which redirects to paypal for $375?
Post by: crtexcnndrm99 on Mon, 27 November 2017, 01:41:27
Sent from my iPhone using Tapatalk
Post by: PainMaster on Mon, 27 November 2017, 03:10:30
i missed paypal Fee
:'( :'( :'( :'( :'( :'(
PreOrder 375 + 15 = $390
GrupBuy 395 + 37 (Add Insufficient Shipping Cost) + 18 = $450
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
Post by: trikoi00 on Mon, 27 November 2017, 05:20:14
Post by: LightningXI on Mon, 27 November 2017, 05:30:28
sorry... :-X
i missed paypal Fee
:'( :'( :'( :'( :'( :'(
PreOrder 375 + 15 = $390
GrupBuy 395 + 15 = $410
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
Just a few quick questions:
- shipping prices 택배비용 worldwide are included then? I read in the KBDlab post that shipping within Korea is about 5000 KRW, but I realize that shipping internationally is much costlier than that, so I want to make sure all costs are accounted for.
- can you post a picture of all supported layouts? Does this PCB support split backspace? What bottom row layouts?
- how do you program this PCB? Is there a guide?
Thanks!
Sent from my SM-G935T using Tapatalk
Post by: OmegaSupreme on Mon, 27 November 2017, 06:47:43
I agree, please confirm this is the case. I might just order one for the hell of it at that price!
Post by: crtexcnndrm99 on Mon, 27 November 2017, 07:57:38
Edit: I went with mixed colours, Black top and Silver bottom - not sure if I'm crazy.. but it looks good on Jane's and LSV's
Post by: ihalatch on Mon, 27 November 2017, 08:08:02
Post by: PainMaster on Mon, 27 November 2017, 09:02:40
sorry... :-X
i missed paypal Fee
:'( :'( :'( :'( :'( :'(
PreOrder 375 + 15 = $390
GrupBuy 395 + 15 = $410
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
Just a few quick questions:
- shipping prices 택배비용 worldwide are included then? I read in the KBDlab post that shipping within Korea is about 5000 KRW, but I realize that shipping internationally is much costlier than that, so I want to make sure all costs are accounted for.
- can you post a picture of all supported layouts? Does this PCB support split backspace? What bottom row layouts?
- how do you program this PCB? Is there a guide?
Thanks!
Sent from my SM-G935T using Tapatalk
Yeah...
Worldwide Shipping included.
Now, not making money,
My first priority is first co-production complete.
I'll prepare the support LayOut.
- ISO Enter, ANSI Enter available.
- backspace 1u available.
- Bottom Line... WinkeyLess & Winkey available. (show Main Picture please.)
program is Leeku's jigOn Support.
Post by: PainMaster on Mon, 27 November 2017, 09:08:47
SO Hard !!!!!
ㄴㅁ이ㅏ럼ㄴㅇ;ㅣㅏ러매ㅔㅑ23ㅈ더ㅗ래ㅑㅁ조ㅓㅎ;ㅐㅑㅕㅁ농ㅀ피먼ㅇㄹ휴ㅣㅓ,카ㅡㅌ유ㅜㅊㅍ.ㅏ,터초ㅠ피ㅐㅓㅋ냐ㅛㅇ렂ㅁㄹ !!!
Post by: frostbyte-gaming on Mon, 27 November 2017, 09:38:36
Preparing invoice ...
SO Hard !!!!!
ㄴㅁ이ㅏ럼ㄴㅇ;ㅣㅏ러매ㅔㅑ23ㅈ더ㅗ래ㅑㅁ조ㅓㅎ;ㅐㅑㅕㅁ농ㅀ피먼ㅇㄹ휴ㅣㅓ,카ㅡㅌ유ㅜㅊㅍ.ㅏ,터초ㅠ피ㅐㅓㅋ냐ㅛㅇ렂ㅁㄹ !!!
Invoice has been paid thanks for all your hard work PainMaster. :thumb:
Post by: avid on Mon, 27 November 2017, 09:42:55
Post by: ihalatch on Mon, 27 November 2017, 10:17:42
Post by: PainMaster on Mon, 27 November 2017, 10:32:52
Can you please send invoices for the preorder?
I just sent it. :)
ThankYou.
Post by: bthezebra on Mon, 27 November 2017, 10:44:23
Sent from my SM-G900V using Tapatalk
Post by: NastyRabbit on Mon, 27 November 2017, 12:22:19
Post by: OmegaSupreme on Mon, 27 November 2017, 13:20:53
Can you please send invoices for the preorder?
I just sent it. :)
ThankYou.
Will a weight from Kins TXCP fit into this board? or is a different size required?
Post by: eyedrop on Mon, 27 November 2017, 14:02:23
Post by: OmegaSupreme on Mon, 27 November 2017, 14:18:35
You're back in now, Omega? I thought you just got a TX-CP. Did you get the TX from kin directly? That's what I wanted actually.
Not completey still debating but at this price I may just jump back in haha.
Post by: eyedrop on Mon, 27 November 2017, 15:17:34
You're back in now, Omega? I thought you just got a TX-CP. Did you get the TX from kin directly? That's what I wanted actually.
Not completey still debating but at this price I may just jump back in haha.
Yeah, the price is good. I got in on the JetFire GB so I might opt out of this one.
Post by: Puddsy on Mon, 27 November 2017, 15:25:21
Can you please send invoices for the preorder?
I just sent it. :)
ThankYou.
Will a weight from Kins TXCP fit into this board? or is a different size required?
different size, pretty clear from the pictures
Post by: kimbles on Mon, 27 November 2017, 15:40:59
Post by: crtexcnndrm99 on Mon, 27 November 2017, 16:22:12
Just filled out the form but want to change the color, would it be possible for me to get an invoice for a black case instead of silver?
+1
Same, I want to change colour to all Silver.
I'm thinking black top and silver bottom case was too crazy an idea.
Post by: OmegaSupreme on Mon, 27 November 2017, 16:52:47
Can you please send invoices for the preorder?
I just sent it. :)
ThankYou.
Will a weight from Kins TXCP fit into this board? or is a different size required?
different size, pretty clear from the pictures
You’re right. Should have caught that. Thanks.
Post by: PainMaster on Mon, 27 November 2017, 20:23:37
Must be reflected in group buys.
I wish I had nothing to lose. :'(
Post by: crtexcnndrm99 on Mon, 27 November 2017, 20:40:26
Post by: MandrewDavis on Mon, 27 November 2017, 21:40:53
Post by: Eggplant on Mon, 27 November 2017, 21:59:29
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
The updated pricing falls more in line with what I was expecting, which is still a very reasonable price, I hope it works out!
Post by: ihalatch on Mon, 27 November 2017, 22:14:39
Post by: poolside on Tue, 28 November 2017, 02:29:38
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
Hi PainMaster,
If you update my pre-order invoice, I will pay the additional shipping costs.
This was too good to be true ;D
Post by: ihalatch on Tue, 28 November 2017, 03:04:25
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
Hi PainMaster,
If you update my pre-order invoice, I will pay the additional shipping costs.
This was too good to be true ;D
Hey mate,
It's free shipping on pre-orders. I suggest anyone who is serious about getting one to pay her/his invoice. It's totally worth it.
Post by: trikoi00 on Tue, 28 November 2017, 04:24:06
Post by: wholypantalones on Tue, 28 November 2017, 05:00:22
Post by: NastyRabbit on Tue, 28 November 2017, 05:47:18
Post by: trikoi00 on Tue, 28 November 2017, 22:18:24
Post by: PainMaster on Tue, 28 November 2017, 23:58:32
I have an issue in my work yesterday
We are working on it.
The invoice will be reissued in about 7 hours.
Post by: aznreaper on Wed, 29 November 2017, 00:24:41
Post by: kimbles on Wed, 29 November 2017, 10:24:08
Hi. ~!
I have an issue in my work yesterday
We are working on it.
The invoice will be reissued in about 7 hours.
Howdy, I don't think I've received an invoice yet.. Did I miss the cut for the pre-order?
Post by: PainMaster on Wed, 29 November 2017, 19:14:06
I'm going to faint...
Post by: bthezebra on Wed, 29 November 2017, 19:27:08
I haven't slept for three days.
I'm going to faint...
Get some rest dude!
Post by: aznreaper on Wed, 29 November 2017, 19:33:14
Post by: afrokobe on Wed, 29 November 2017, 21:06:47
Post by: aznreaper on Wed, 29 November 2017, 21:38:55
Post by: amnesia0287 on Wed, 29 November 2017, 22:44:46
Ooh, fresh I'd be interested, someone should run a buy for brass plates and weights
:)) :)) :))
Post by: robotsokk on Wed, 29 November 2017, 23:10:39
Post by: bthezebra on Thu, 30 November 2017, 00:05:13
(https://i.imgur.com/8luWwen.jpg) (https://geekhack.org/index.php?topic=92644.0)
Post by: jackie321304 on Thu, 30 November 2017, 00:16:50
Count me in on the brass plate group buy.
(https://i.imgur.com/8luWwen.jpg) (https://geekhack.org/index.php?topic=92644.0)
Me too, I filled up the form but havn't receive the invoice yet.
Post by: poolside on Thu, 30 November 2017, 17:56:04
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
Hi PainMaster,
If you update my pre-order invoice, I will pay the additional shipping costs.
This was too good to be true ;D
Hey mate,
It's free shipping on pre-orders. I suggest anyone who is serious about getting one to pay her/his invoice. It's totally worth it.
Ah, yes thanks. Invoice paid for the WedgeMaster!
Moresorry... :-X
i missed paypal Fee
:'( :'( :'( :'( :'( :'(
PreOrder 375 + 15 = $390
GrupBuy 395 + 15 = $410
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
Just a few quick questions:
- shipping prices 택배비용 worldwide are included then? I read in the KBDlab post that shipping within Korea is about 5000 KRW, but I realize that shipping internationally is much costlier than that, so I want to make sure all costs are accounted for.
- can you post a picture of all supported layouts? Does this PCB support split backspace? What bottom row layouts?
- how do you program this PCB? Is there a guide?
Thanks!
Sent from my SM-G935T using Tapatalk
I'll prepare the support LayOut.
- Bottom Line... WinkeyLess & Winkey available. (show Main Picture please.)
Will the final switch plate revision have support for 1u 1u 1u between the spacebar and the arrow cluster? It looks like so in the picture visible at the bottom of the first page.
Post by: ihalatch on Thu, 30 November 2017, 18:40:32
Post by: lyk503 on Thu, 30 November 2017, 19:05:31
Post by: Badmotorfinger on Thu, 30 November 2017, 19:09:15
Sent from my iPhone using Tapatalk
Post by: lyk503 on Thu, 30 November 2017, 19:14:26
Post by: PainMaster on Thu, 30 November 2017, 19:24:44
I'm awake now!
Slept for 20 hours ... ^-^ ^-^ ^-^ ^-^ ^-^
I started PreOrder 1 day later.
PreOrder runs through the December 1st.
And, December 2nd, switch to GrupBuy.
Today we will publish all PreOrder invoice!
Post by: aznreaper on Thu, 30 November 2017, 19:25:05
There is a link to the invoice in the preorder google form.
Afaik, the link in the form is incorrect, the price including shipping is supposed to be 450, so don't pay through the link.
Post by: PainMaster on Thu, 30 November 2017, 19:29:33
There is a link to the invoice in the preorder google form.
Afaik, the link in the form is incorrect, the price including shipping is supposed to be 450, so don't pay through the link.
Is it really?
What I checked now is still 390?
Post by: ihalatch on Thu, 30 November 2017, 19:32:06
There is a link to the invoice in the preorder google form.
Afaik, the link in the form is incorrect, the price including shipping is supposed to be 450, so don't pay through the link.
Free shipping for pre-orders :)
Post by: aznreaper on Thu, 30 November 2017, 19:36:05
Post by: PainMaster on Fri, 01 December 2017, 03:19:49
PreOrder is Ended.
GB Form Ready & Start ~!!
Google forms : https://goo.gl/UTy3kw (https://goo.gl/UTy3kw)
Please , join this !!!!
=========================================================================
Post by: PainMaster on Fri, 01 December 2017, 03:39:31
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
HTN47
Melanic
papedahut
Unforgivable
Post by: crtexcnndrm99 on Fri, 01 December 2017, 04:09:03
Sent from my iPhone using Tapatalk
Post by: trikoi00 on Fri, 01 December 2017, 06:22:04
Hi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
HTN47
aznreaper
bminhz
MechanicalElement
Melanic
poolside
papedahut
wholypantalones
Unforgivable
eyedrop
trikoi00
robotsokk
packman86
have just sent you a personal message for my email address.
Post by: wholypantalones on Fri, 01 December 2017, 06:51:24
Hi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
wholypantalones
Message sent
Post by: eyedrop on Fri, 01 December 2017, 07:55:05
Good luck with the GB. It is a nice board at a very attractive price point.
Post by: crtexcnndrm99 on Fri, 01 December 2017, 08:32:57
Sent from my iPhone using Tapatalk
Post by: aznreaper on Fri, 01 December 2017, 08:53:33
Post by: Puddsy on Fri, 01 December 2017, 11:59:00
Post by: PainMaster on Fri, 01 December 2017, 12:35:51
i need more line .... T^T
Post by: Eggplant on Fri, 01 December 2017, 13:16:50
Post by: poolside on Sat, 02 December 2017, 09:43:03
Hi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
HTN47aznreaper
bminhz
MechanicalElement
Melanic
poolside
papedahutwholypantalones
Unforgivableeyedroptrikoi00
robotsokk
packman86
PM sent!
Post by: PainMaster on Sun, 03 December 2017, 07:37:44
I read every PM and comments.
It will be processed from tomorrow.
It is so hard right now ...
Post by: robotsokk on Sun, 03 December 2017, 13:55:23
Post by: bminhz on Sun, 03 December 2017, 14:39:22
Sent from my iPhone using Tapatalk Pro
Post by: PainMaster on Sun, 03 December 2017, 21:02:39
Pm sent, I hope to see what the grey and silver options will look like if possible as well, even anodization samples would be nice
I'm sorry.
The sample is black only.
please refer to the silver or titanium gray.
However, the titanium gray is ' a lot darker ' than VE.A.
Post by: amnesia0287 on Sun, 03 December 2017, 21:04:28
Pm sent, I hope to see what the grey and silver options will look like if possible as well, even anodization samples would be nice
I'm sorry.
The sample is black only.
please refer to the silver or titanium gray.
However, the titanium gray is ' a lot darker ' than VE.A.
So you are saying the gray is "a lot better". :p
Post by: PainMaster on Sun, 03 December 2017, 21:54:24
Nobody participates in GB... >:D >:D :'( :'(
Now.
We achieved MOQ 20.
10 More plz ~!!
Post by: amnesia0287 on Sun, 03 December 2017, 22:00:29
as expected
Nobody participates in GB... >:D >:D :'( :'(
Now.
We achieved MOQ 20.
10 More plz ~!!
Have you posted on reddit?
Post by: PainMaster on Sun, 03 December 2017, 22:04:23
as expected
Nobody participates in GB... >:D >:D :'( :'(
Now.
We achieved MOQ 20.
10 More plz ~!!
Have you posted on reddit?
Nope.
Reddit's concept is too difficult for me.
It's hard to understand.
Post by: amnesia0287 on Sun, 03 December 2017, 22:06:30
as expected
Nobody participates in GB... >:D >:D :'( :'(
Now.
We achieved MOQ 20.
10 More plz ~!!
Have you posted on reddit?
Nope.
Reddit's concept is too difficult for me.
It's hard to understand.
I'm not particularly good at reddit myself, but im sure there are ppl on here who would post it for you.
Post by: crtexcnndrm99 on Sun, 03 December 2017, 22:50:36
Sent from my iPhone using Tapatalk
Post by: ihalatch on Sun, 03 December 2017, 22:53:05
Post by: PainMaster on Mon, 04 December 2017, 00:32:53
If you didn't get invoice, please send me PM.
Post by: Eggplant on Mon, 04 December 2017, 00:40:19
Post by: Ponkan on Mon, 04 December 2017, 22:43:27
Why are there 2 quantity questions to fill out?
What's the address 2 for?
Any renders or color chips for the grey and silver?
Post by: PainMaster on Mon, 04 December 2017, 22:46:51
Hi! I'm confused on how to fill up the form! I'd like to join in this though.
Why are there 2 quantity questions to fill out?
What's the address 2 for?
Any renders or color chips for the grey and silver?
Addr 1 = Nation & City
Addr 2 (Detail) = Everything Other than "Addr 1"
Gray and silver do not have prepared samples.
please refer to the silver or titanium gray of VE.A
However, the titanium gray is ' a lot darker ' than VE.A.
Post by: Ponkan on Mon, 04 December 2017, 23:02:43
Hi! I'm confused on how to fill up the form! I'd like to join in this though.
Why are there 2 quantity questions to fill out?
What's the address 2 for?
Any renders or color chips for the grey and silver?
Thank you! Sent a form!
Addr 1 = Nation & City
Addr 2 (Detail) = Everything Other than "Addr 1"
Gray and silver do not have prepared samples.
please refer to the silver or titanium gray of VE.A
However, the titanium gray is ' a lot darker ' than VE.A.
Post by: PainMaster on Mon, 04 December 2017, 23:15:53
Hi! I'm confused on how to fill up the form! I'd like to join in this though.
Why are there 2 quantity questions to fill out?
What's the address 2 for?
Any renders or color chips for the grey and silver?
Thank you! Sent a form!
Addr 1 = Nation & City
Addr 2 (Detail) = Everything Other than "Addr 1"
Gray and silver do not have prepared samples.
please refer to the silver or titanium gray of VE.A
However, the titanium gray is ' a lot darker ' than VE.A.
ThankYou ^^
Sent a invoice.
Post by: PainMaster on Mon, 04 December 2017, 23:36:53
Hi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
HTN47
Melanic
papedahut
UnforgivableaznreaperbminhzMechanicalElementpoolsidewholypantaloneseyedroptrikoi00robotsokkpackman86
Hi Friends ~!!
4 Persons More Plz ~!!
.... And
There are One more to the MOQ !!!!
[attachimg=1]
Post by: Vloshko on Tue, 05 December 2017, 10:04:30
Post by: kimbles on Tue, 05 December 2017, 10:19:15
Post by: ihalatch on Tue, 05 December 2017, 17:14:53
Post by: Puddsy on Tue, 05 December 2017, 18:45:13
https://www.reddit.com/r/mechmarket/comments/7hub1z/gb_saib_cp/
Post by: bthezebra on Tue, 05 December 2017, 19:05:55
i posted it to redditGood deal Puddsy
https://www.reddit.com/r/mechmarket/comments/7hub1z/gb_saib_cp/
(https://i.imgur.com/8luWwen.jpg) (https://geekhack.org/index.php?topic=92644.0)
Post by: Puddsy on Tue, 05 December 2017, 19:07:10
i posted it to redditGood deal Puddsy
https://www.reddit.com/r/mechmarket/comments/7hub1z/gb_saib_cp/
nobody else did it so
EDIT: haha it got removed
F
Post by: PainMaster on Tue, 05 December 2017, 20:15:22
i posted it to redditGood deal Puddsy
https://www.reddit.com/r/mechmarket/comments/7hub1z/gb_saib_cp/
nobody else did it so
EDIT: haha it got removed
F
.....!!!!!
I'm sorry,
I'll register that today.
Post by: Puddsy on Tue, 05 December 2017, 21:03:20
i posted it to redditGood deal Puddsy
https://www.reddit.com/r/mechmarket/comments/7hub1z/gb_saib_cp/
nobody else did it so
EDIT: haha it got removed
F
.....!!!!!
I'm sorry,
I'll register that today.
no worries, you said it was hard so i thought i'd try to help
i want your GB to go through, it looks really nice
Post by: PainMaster on Tue, 05 December 2017, 22:04:56
The shots 1 day.
I look very similar to KMAC 1
I first saw KMAC1 1 month ago, After design...
It's so much the same,
There was only a fake smile. T^T
[attachimg=1]
[attachimg=2]
[attachimg=3]
Post by: Puddsy on Tue, 05 December 2017, 22:10:23
looks good though
Post by: PainMaster on Tue, 05 December 2017, 22:17:11
You mean KMAC 2?
looks good though
KMAC 1
Post by: Puddsy on Tue, 05 December 2017, 22:18:38
You mean KMAC 2?
looks good though
KMAC 1
interesting, thank you
Post by: crtexcnndrm99 on Tue, 05 December 2017, 22:42:10
Sent from my iPhone using Tapatalk
Post by: Ponkan on Tue, 05 December 2017, 22:46:36
Post by: Vloshko on Wed, 06 December 2017, 15:06:23
Post by: poolside on Wed, 06 December 2017, 15:22:39
as expected
Nobody participates in GB... >:D >:D :'( :'(
Now.
We achieved MOQ 20.
10 More plz ~!!
MoreHi Friends.
I want to know the email address of the names here.
I don't know whose email address is deposited by the name.
Give me a message.
please. :)
HTN47
Melanic
papedahut
UnforgivableaznreaperbminhzMechanicalElementpoolsidewholypantaloneseyedroptrikoi00robotsokkpackman86
Hi Friends ~!!
4 Persons More Plz ~!!
.... And
There are One more to the MOQ !!!!
I joined
This is it! Is the MOQ 20 or 30? It says 30 in the first post.
Post by: Puddsy on Wed, 06 December 2017, 15:41:29
Post by: Pell99 on Thu, 07 December 2017, 12:50:16
Post by: ihalatch on Thu, 07 December 2017, 23:18:36
Post by: PainMaster on Fri, 08 December 2017, 00:45:17
How's it going? Any news on the GB?
introduce GB Schedule. (expectation)
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
Post by: ihalatch on Fri, 08 December 2017, 00:50:07
How's it going? Any news on the GB?
introduce GB Schedule.
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
Did we hit the target of 30+ keyboards?
Post by: PainMaster on Fri, 08 December 2017, 00:57:49
How's it going? Any news on the GB?
introduce GB Schedule.
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
Did we hit the target of 30+ keyboards?
just 30.
There were those who canceled ...
Post by: PainMaster on Fri, 08 December 2017, 01:07:50
because there is no response.
Thank you for your "PO" attention.
Post by: forumusername on Fri, 08 December 2017, 18:20:18
Post by: amnesia0287 on Fri, 08 December 2017, 18:57:02
I've been "PreOrder payment" waiting for 7 days, but ... Canceled
because there is no response.
Thank you for your "PO" attention.
I’m confused. What’s cancelled?
Post by: aznreaper on Fri, 08 December 2017, 19:02:23
Post by: Puddsy on Fri, 08 December 2017, 19:12:38
I'm assuming those who said they would pre-order, but never followed up
i had the same assumption
we are now at group buy pricing, not preorder pricing
it's a bit lost in translation
Post by: PainMaster on Fri, 08 December 2017, 20:11:06
Does that mean there is room for one more pre-order? If so I'll gladly take that spot :)
Sorry.
this GB's PreOrder has been terminated.
Please join GB.
Post by: PainMaster on Fri, 08 December 2017, 20:18:43
I've been "PreOrder payment" waiting for 7 days, but ... Canceled
because there is no response.
Thank you for your "PO" attention.
I’m confused. What’s cancelled?
There were 3 people are express to me, "SaiB-CP PreOrder" participation.
I waited for them's (PreOrder) payment, seven days.
but...
GB is continues.
don't warry about it. :)
Post by: robotsokk on Sat, 09 December 2017, 00:50:53
There were 3 people are express to me, "SaiB-CP PreOrder" participation.
I waited for them's (PreOrder) payment, seven days.
but...
GB is continues.
don't warry about it. :)
Ah, got it. Three folks that posted requesting pre-order pricing that didn't respond by the pre-order submission deadline, and thus are now being punted to the 'GB'-phase pricing.
Post by: forumusername on Sun, 10 December 2017, 20:42:14
Post by: LightningXI on Sun, 10 December 2017, 20:49:31
I want to join but I can't decide on color :(
They're all safe bets, but if I had to choose for you, I'd pick whatever color you don't own or plan to own over the next 4 months.
Post by: forumusername on Sun, 10 December 2017, 21:00:10
Post by: aznreaper on Sun, 10 December 2017, 21:06:50
Post by: PainMaster on Sun, 10 December 2017, 21:48:26
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Post by: Puddsy on Sun, 10 December 2017, 22:12:48
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Now all the mention of KMAC 1 makes sense. Thanks, PM.
Post by: PainMaster on Tue, 12 December 2017, 19:57:15
I met VE.A v2 GB runner~!
We talked about the SaiB-CP GB schedule for a long time.
According to schedule, GB end on Friday.
I'll order to the factory on next Monday.
Finally!
My first GB starts three days later!
Post by: forumusername on Tue, 12 December 2017, 20:11:30
What is your favorite color PainMaster? I am excited for your 1st group buy too :thumb:
Post by: PainMaster on Tue, 12 December 2017, 20:19:06
Did you upload the photo I didn't see it :-\
What is your favorite color PainMaster? I am excited for your 1st group buy too :thumb:
really sorry.
photos are Contains " VE.A " v2.
we decided to post it later.
Sorry :)
Post by: ihalatch on Fri, 15 December 2017, 15:49:12
Post by: PainMaster on Sat, 16 December 2017, 23:59:20
PainMaster can you please make a spreadsheet of our orders?
Yes
To check & confirm your contractract
Preparing to develop simple service.
I think I will show you around in mid-January.
Post by: PainMaster on Sun, 17 December 2017, 23:13:06
Order to Factory Complete !!
Next notification schedule is December 30th.
see you 14 days later~
Post by: bthezebra on Sun, 17 December 2017, 23:14:35
(https://i.imgur.com/8luWwen.jpg) (https://geekhack.org/index.php?topic=92644.0)
Post by: ihalatch on Sun, 17 December 2017, 23:15:31
Order to Factory Complete !!
Next notification schedule is December 30th.
see you 14 days later~
Thanks, mate. That's awesome.
Post by: PainMaster on Thu, 28 December 2017, 22:57:58
I miscalculated the shipping cost,
I have nothing but shipping and handling charge.
:'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'(
Next notification schedule is February 15th of 2018. (2018/02/15 - expectation)
see you 2 month later
Post by: ihalatch on Thu, 28 December 2017, 23:00:55
Post by: PainMaster on Thu, 28 December 2017, 23:14:06
Please, post a spreadsheet with our orders when you have time?
now i creating webpage, about check 'your' order details.
I'm running a little behind because I'm making it after work.
i hope to be open to you on or about January 27th of 2018. :)
Post by: ihalatch on Thu, 28 December 2017, 23:16:50
Post by: PainMaster on Thu, 28 December 2017, 23:17:57
Thanks mate. Merry Christmas and Happy New Year.
Merry Christmas & Happy New Year. :)
Post by: odd on Fri, 29 December 2017, 18:15:39
Post by: amnesia0287 on Fri, 29 December 2017, 19:57:19
Thanks mate. Merry Christmas and Happy New Year.
Merry Christmas & Happy New Year. :)
You too :D.
Also, any chance we can get the plate design to try and use with https://geekhack.org/index.php?topic=91995.0
I'm not sure if it will work or not since I imagine with this case design plate thickness is super critical, but I <3 brass plates, so might as well try.
Post by: MandrewDavis on Sun, 31 December 2017, 22:01:43
Thanks mate. Merry Christmas and Happy New Year.
Merry Christmas & Happy New Year. :)
You too :D.
Also, any chance we can get the plate design to try and use with https://geekhack.org/index.php?topic=91995.0
I'm not sure if it will work or not since I imagine with this case design plate thickness is super critical, but I <3 brass plates, so might as well try.
Releasing the plate file would be great, I am looking to make a carbon fiber plate machined. That would make it much easier than reverse-engineering it like I did for the LSv3.
Post by: wholypantalones on Sun, 07 January 2018, 14:23:49
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Any color samples yet? I ordered a Titan gray and I'd really like to know that this isn't similar to titanium gray.
Post by: aznreaper on Sun, 07 January 2018, 19:16:03
Post by: MandrewDavis on Thu, 11 January 2018, 15:18:40
Post by: dubious on Thu, 11 January 2018, 18:54:46
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Any color samples yet? I ordered a Titan gray and I'd really like to know that this isn't similar to titanium gray.
It is actually called 'titanium grey' but it gets a little lost in translation ;)
You can google titanium Kmac1 to get an idea of what it will look like.
Post by: amnesia0287 on Thu, 11 January 2018, 20:24:09
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Any color samples yet? I ordered a Titan gray and I'd really like to know that this isn't similar to titanium gray.
It is actually called 'titanium grey' but it gets a little lost in translation ;)
You can google titanium Kmac1 to get an idea of what it will look like.
The problem with the name titanium grey is the color temp can vary all over the place. Some people sell a very red/gold grey as titanium grey, others just use it to describe a normal medium grey. So without samples, the name is somewhat meaningless.
Post by: Photoelectric on Thu, 11 January 2018, 20:32:03
Post by: wholypantalones on Thu, 11 January 2018, 20:47:09
I want to join but I can't decide on color :(
I'm going to upload a titan grey sample of tonight.
it's a KMAC1. (not SaiB-CP)
Just check the color.
Any color samples yet? I ordered a Titan gray and I'd really like to know that this isn't similar to titanium gray.
It is actually called 'titanium grey' but it gets a little lost in translation ;)
You can google titanium Kmac1 to get an idea of what it will look like.
Titanium gray tends to be more blue-ish gray, where TX boards in Titan gray are more dark gray. I'm hoping for the kmac or TX 'titan gray' and not 'titanium gray'.
Post by: PainMaster on Thu, 11 January 2018, 21:07:53
I'd make 'titan gray'.
Samples of 'Titan Grey' color are progressing very similar to kmac 1.
What color is titanium gray?
Post by: amnesia0287 on Thu, 11 January 2018, 21:26:05
I never said 'titanium gray'.
I'd make 'titan gray'.
Samples of 'Titan Grey' color are progressing very similar to kmac 1.
What color is titanium gray?
Yeah, but what color is Titan Grey? Is it like titan colored:
(https://i1.wp.com/www.thehergula.com/wp-content/uploads/2017/08/Eren-Titan.png)
:P
Post by: wholypantalones on Fri, 12 January 2018, 05:18:44
I never said 'titanium gray'.
I'd make 'titan gray'.
Samples of 'Titan Grey' color are progressing very similar to kmac 1.
What color is titanium gray?
Titanium gray klippe next to a silver TX-87.
https://imgur.com/a/Uhpp1
Post by: Puddsy on Fri, 12 January 2018, 12:41:41
I never said 'titanium gray'.
I'd make 'titan gray'.
Samples of 'Titan Grey' color are progressing very similar to kmac 1.
What color is titanium gray?
It's a translation thing, most english speakers don't call it Titan grey, but rather Titanium grey. It's the same color. For KMAC, we call the grey Titanium grey, even though the color is really called Titan grey.
Post by: Photoelectric on Fri, 12 January 2018, 13:19:44
Post by: PainMaster on Mon, 15 January 2018, 19:12:29
security Editing - Sorry !! See you next time-
Picture under the Sun. with iPhone X (Photographer : ildustry of VE.A)
(Left Gray / Right Titan Gray)
[attach=1]
CNC Process Finished this week.
Anodizing is maybe scheduled to end next week
next week ~ late February. (Inspection)
PCB is scheduled to end in late February.
Post by: wholypantalones on Mon, 15 January 2018, 19:54:37
It's Titan Gray Sample Color.
Me likey.
Post by: ihalatch on Mon, 15 January 2018, 21:21:01
It's Titan Gray Sample Color.
Me likey.
+1
Post by: LightningXI on Mon, 15 January 2018, 22:07:47
Post by: PainMaster on Tue, 16 January 2018, 00:00:00
> ANSI
[attachimg=1]
> ISO
[attachimg=2]
Post by: Ponkan on Tue, 16 January 2018, 00:51:58
Post by: PainMaster on Tue, 16 January 2018, 01:16:33
Man, I wish I joined along with my brother. Titan gray looks super nice.
Sorry.
Order is Over.
in Production Processing,
Even I can not correct it.
You can use 1 ea of GB.
Post by: Ponkan on Tue, 16 January 2018, 01:27:22
Man, I wish I joined along with my brother. Titan gray looks super nice.
Sorry.
Order is Over.
in Production Processing,
Even I can not correct it.
You can use 1 ea of GB.
Yup, I know. Thanks for the update though. Boards are looking nice!
Post by: PainMaster on Tue, 16 January 2018, 01:59:17
In my think, there is not enough time to make a program.
Release the document.
Check Your Order (Quantity, Color) based on part Encrypted email address.
[attachimg=1]
Post by: aznreaper on Tue, 16 January 2018, 02:02:14
Post by: PainMaster on Tue, 16 January 2018, 02:05:14
Looks great! Man, I almost regret switching from Titan grey to black it looks so good! Spreadsheet looks fine for me, will you be asking if we are going with ANSI or ISO plates latter though email, or do you want us to message you what we would like?
ANSI or ISO plates choice will be made next week. :)
now on test
Post by: ihalatch on Tue, 16 January 2018, 03:40:32
I am busy now,
In my think, there is not enough time to make a program.
Release the document.
Check Your Order (Quantity, Color) based on part Encrypted email address.
(Attachment Link)
Looks good. Thanks.
Post by: Badmotorfinger on Tue, 23 January 2018, 19:03:48
Post by: odd on Tue, 30 January 2018, 13:52:15
Post by: PainMaster on Thu, 01 February 2018, 02:23:02
SaiB - CP Alu Housing was arrived last night.
I'm going to do a one month, quality check & Inspection & Defect Modification request from today.
SUS Plate product schedule is Next week.
PCB LogicBoard is Last week of February (expectation)
[attachimg=1]
Post by: ihalatch on Thu, 01 February 2018, 03:02:04
Post by: PainMaster on Mon, 05 February 2018, 19:45:33
QC Real Thing.
The color is so pretty of just as my think !
I'm very happy. :):):):)
> Black
[attachimg=1]
> Titan Gray
[attachimg=2]
> Silver
[attachimg=3]
(QC) quality checking...
[attachimg=4]
[attachimg=5]
And...
A couple of days ago, Duck Show me Real Jet fire.
[attachimg=6]
Post by: Puddsy on Mon, 05 February 2018, 20:06:11
QC Real Thing.
The color is so pretty of just as my think !
I'm very happy. :):):):)
> Black
(Attachment Link)
> Titan Gray
(Attachment Link)
> Silver
(Attachment Link)
(QC) quality checking...
(Attachment Link)
(Attachment Link)
And...
A couple of days ago, Duck Show me Real Jet fire.
(Attachment Link)
Nice! Thanks for the update.
Post by: dubious on Tue, 06 February 2018, 11:13:37
Can't wait to see these built :thumb: :thumb: :thumb: :thumb: :thumb:
Post by: PainMaster on Thu, 08 February 2018, 03:51:14
i'm ready to Defect Modification request.
maybe... tomorrow.
Check Your Order (Quantity, Color) based on part Encrypted email address.
[attachimg=1]
Post by: ihalatch on Thu, 08 February 2018, 06:23:45
Post by: aznreaper on Thu, 08 February 2018, 10:02:12
Post by: Pell99 on Sun, 11 February 2018, 07:57:13
Hey did you ever send out an email regarding the choice of plate?
It's only SUS plate
-----
Plate : STS Only (Laser)
Post by: aznreaper on Sun, 11 February 2018, 12:43:16
Hey did you ever send out an email regarding the choice of plate?
It's only SUS plate
-----
Plate : STS Only (Laser)
There is an ISO and ANSI plate that he showed above
Post by: amnesia0287 on Sun, 11 February 2018, 12:52:20
Hey did you ever send out an email regarding the choice of plate?
It's only SUS plate
-----
Plate : STS Only (Laser)
There is an ISO and ANSI plate that he showed above
Yeah @Pell99 read up:
Looks great! Man, I almost regret switching from Titan grey to black it looks so good! Spreadsheet looks fine for me, will you be asking if we are going with ANSI or ISO plates latter though email, or do you want us to message you what we would like?
ANSI or ISO plates choice will be made next week. :)
now on test
Post by: PainMaster on Tue, 13 February 2018, 01:19:55
ANSI : 37
ISO : 8
If you want ISO, PM to me.
Post by: aznreaper on Thu, 01 March 2018, 15:12:20
Post by: PainMaster on Thu, 01 March 2018, 21:58:41
Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
I talked to Leeku just a moment ago.
unfortunately,
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
Post by: wholypantalones on Fri, 02 March 2018, 06:42:11
Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
I talked to Leeku just a moment ago.
unfortunately,
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
Leeku strikes again. Thanks for the update anyway.
Post by: aznreaper on Fri, 02 March 2018, 08:19:05
Post by: Puddsy on Fri, 02 March 2018, 12:32:26
Yeah, screwing us over on the 75sq, and now even this project.... Hopefully he doesn't delay this project as much as the other
leeku has been delaying projects since 2013
but he always comes through
Post by: dubious on Fri, 02 March 2018, 12:34:11
Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
I talked to Leeku just a moment ago.
unfortunately,
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
Thanks for the update, still a decent turn around time if everything else works out ;D
Post by: Vloshko on Sat, 03 March 2018, 01:56:25
SUS plate MOQ is 45.
ANSI : 37
ISO : 8
If you want ISO, PM to me.
PMing
Post by: wholypantalones on Tue, 27 March 2018, 20:59:52
Post by: Puddsy on Tue, 27 March 2018, 22:22:18
Any replacement cases found for this yet?
in what context
Post by: wholypantalones on Wed, 28 March 2018, 06:41:56
Any replacement cases found for this yet?
in what context
2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Post by: ihalatch on Wed, 28 March 2018, 06:47:05
Any replacement cases found for this yet?
in what context2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Yes ... bags would be great. I got one with my TX-CP.
Post by: Puddsy on Wed, 28 March 2018, 10:59:55
Any replacement cases found for this yet?
in what context2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Buy a pelican case, or something similar
Post by: BillyTheMute on Wed, 28 March 2018, 12:10:26
Any replacement cases found for this yet?
in what context2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Buy a pelican case, or something similar
Yep, my bad.
Post by: amnesia0287 on Wed, 28 March 2018, 13:32:22
Any replacement cases found for this yet?
in what context2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
Buy a pelican case, or something similar
I can get a case from kin, I was under the impression that this was supposed to come with a case.
Why are you under that impression?
The amount has been adjusted, as the TXBag plan is canceled.
I will let yours know when the next KeyPack plan is confirmed.
He changed the pricing when the bags weren’t available quite a while ago. You didn’t pay for a bag so why would you expect one?
Post by: LightningXI on Wed, 28 March 2018, 13:49:59
Sent from my mobile using Tapatalk
Post by: aznreaper on Wed, 28 March 2018, 15:20:57
Post by: wholypantalones on Wed, 28 March 2018, 18:11:32
Post by: amnesia0287 on Sat, 07 April 2018, 00:49:51
@PainMaster
Can you share the the design for a weight or the measurements of the cutout and screws and stuff so I can get a weight made? Also wouldn't mind the plate design to to get a brass plate made too :P
Post by: wholypantalones on Sat, 07 April 2018, 07:37:37
@PainMaster
Can you share the the design for a weight or the measurements of the cutout and screws and stuff so I can get a weight made? Also wouldn't mind the plate design to to get a brass plate made too :P
Same.
Post by: LightningXI on Sat, 07 April 2018, 12:36:28
I'd be in for brass and/or a weight as well.
@PainMaster
Can you share the the design for a weight or the measurements of the cutout and screws and stuff so I can get a weight made? Also wouldn't mind the plate design to to get a brass plate made too
Any updates overall?
Sent from my mobile using Tapatalk
Post by: aznreaper on Sat, 07 April 2018, 14:44:53
Post by: bryankoorean on Sat, 07 April 2018, 18:35:31
Is there anybody that has paid but doesn’t want their order anymore?
Much appreciated, thanks.
Sent from my iPhone using Tapatalk
Post by: wholypantalones on Thu, 12 April 2018, 21:19:48
Post by: ihalatch on Sat, 14 April 2018, 21:19:02
Post by: LightningXI on Sat, 14 April 2018, 21:37:25
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
Any updates on the PCB?
Post by: hineybush on Sat, 14 April 2018, 22:07:49
Post by: wholypantalones on Sun, 15 April 2018, 11:20:08
Definitely interested in a spot if anyone's interested in selling, or a Round 2 of the GB.
Quote
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
If we don't get some updates soon, there will be a spot available.
Post by: amnesia0287 on Sun, 15 April 2018, 14:07:30
Definitely interested in a spot if anyone's interested in selling, or a Round 2 of the GB.Quote0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
If we don't get some updates soon, there will be a spot available.
Why you posting old info we already know has slipped?
Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
I talked to Leeku just a moment ago.
unfortunately,
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
It is just now today the earliest possible day he thought he could ship by lol. Calm down. Nothing he can do to make leeku ship pcbs faster.
Post by: wholypantalones on Sun, 15 April 2018, 14:48:12
Definitely interested in a spot if anyone's interested in selling, or a Round 2 of the GB.Quote0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
If we don't get some updates soon, there will be a spot available.
Why you posting old info we already know has slipped?Hey Painmaster how's the GB look like now? Seemed like we were a little ahead of schedule, all the plates and PCB's arrive yet, we almost there? ;D
I talked to Leeku just a moment ago.
unfortunately,
The PCB will be shipped in early April. (2018/04/01~04/15)
I think I'll be able to ship it on April 15th at the earliest.
I hurried, but it's not easy to manage 3rd Party schedule.
I am Really sorry ... T^T
It is just now today the earliest possible day he thought he could ship by lol. Calm down. Nothing he can do to make leeku ship pcbs faster.
I'm pretty calm actually, thanks though. You internet people sure like to misconstrue things typed in reply box.
Post by: PainMaster on Sun, 15 April 2018, 21:02:30
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Post by: aznreaper on Sun, 15 April 2018, 21:29:51
Post by: lac29 on Sun, 15 April 2018, 21:41:12
Post by: bryankoorean on Sun, 15 April 2018, 21:42:06
I personally won't buy another custom kb unless it's USB-C and QMK.Unfortunately, there’s not that many options for usb-c right?
Sent from my iPhone using Tapatalk
Post by: lac29 on Sun, 15 April 2018, 21:45:02
I personally won't buy another custom kb unless it's USB-C and QMK.Unfortunately, there’s not that many options for usb-c right?
Sent from my iPhone using Tapatalk
There aren't too many but it's starting to show up in customs. QMK I'm more interested in, but in the next year or two, I except any purchase I make here to be USB-C.
Post by: wholypantalones on Fri, 20 April 2018, 09:59:40
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Post by: amnesia0287 on Fri, 20 April 2018, 14:42:45
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
Post by: aznreaper on Fri, 20 April 2018, 14:45:40
Post by: hineybush on Sat, 21 April 2018, 13:27:19
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
I could prob do that. I'd just need a KLE with layouts and other features like USB location, spacing, etc. My current project one won't fit directly, as my top row is spaced differently. It wouldn't take much to adjust the footprints.
Post by: bryankoorean on Sat, 21 April 2018, 20:11:50
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
I could prob do that. I'd just need a KLE with layouts and other features like USB location, spacing, etc. My current project one won't fit directly, as my top row is spaced differently. It wouldn't take much to adjust the footprints.
Do you have a thread somewhere?
Sent from my iPhone using Tapatalk
Post by: hineybush on Sun, 22 April 2018, 11:29:35
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
I could prob do that. I'd just need a KLE with layouts and other features like USB location, spacing, etc. My current project one won't fit directly, as my top row is spaced differently. It wouldn't take much to adjust the footprints.
Do you have a thread somewhere?
Sent from my iPhone using Tapatalk
Not for this - waiting on prototype FC980M replacement PCBs to come in, and for me to assemble them, to make a thread for the project.
edit: hey yall thanks for the interest, wait for the IC thread to discuss it tho so we don't gum up this GB thread. thanks
Post by: wholypantalones on Sun, 22 April 2018, 19:38:23
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
I could prob do that. I'd just need a KLE with layouts and other features like USB location, spacing, etc. My current project one won't fit directly, as my top row is spaced differently. It wouldn't take much to adjust the footprints.
Do you have a thread somewhere?
Sent from my iPhone using Tapatalk
Not for this - waiting on prototype FC980M replacement PCBs to come in, and for me to assemble them, to make a thread for the project.
For real? 980M pcbs? So in.
Post by: ihalatch on Mon, 23 April 2018, 01:23:09
Post by: Amthe on Mon, 23 April 2018, 03:07:16
2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
Kin has the files for Leeku pcb's. You could hit up Kin and see if you can get some pcb's from him to finish the GB.. Just a thought.
Alternatively, I have a spare Leeku CP pcb sitting in a drawer. I wouldn't be mad if you refunded me the cost of the pcb and just sent me my kit. Just saying..
Hineybush is also doing a QMK CP pcb, he could probably do one that would fit this too (not sure if it works by default or not).
I could prob do that. I'd just need a KLE with layouts and other features like USB location, spacing, etc. My current project one won't fit directly, as my top row is spaced differently. It wouldn't take much to adjust the footprints.
Do you have a thread somewhere?
Sent from my iPhone using Tapatalk
Not for this - waiting on prototype FC980M replacement PCBs to come in, and for me to assemble them, to make a thread for the project.
For real? 980M pcbs? So in.
wow nice me too
Post by: aznreaper on Thu, 26 April 2018, 14:37:13
PainMaster, have you got any updates for us?
Yeah likewise, it's almost a week after the PCB's should be done. Have you received anything yet, or what is the plan going forwards?
Post by: dubious on Thu, 26 April 2018, 16:19:12
PainMaster, have you got any updates for us?
Yeah likewise, it's almost a week after the PCB's should be done. Have you received anything yet, or what is the plan going forwards?
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
PCB's with leeku have fallen through, and I believe he is sourcing new PCB's. Hold tight =)
Post by: PainMaster on Mon, 30 April 2018, 19:48:33
2018-05-01 Update.
I talked to Leeku on the phone last night,
We agreed to produce a PCB by two weeks later.
I will begin shipping between 2018-05-15 and 2018-05-18.
I'm sorry for the delay in shipping.
Post by: PainMaster on Mon, 30 April 2018, 19:49:19
SaiB - CP
(Simple, as is Best. - Compact)
from kbdlab.
- I made it Myself. because I couldn't buy it. -
=========================================================================
> 2018-04-16 Update.
Hello, Everyone.
I talked to Leeku on the phone last night,
We agreed to produce a PCB by two weeks later.
I will begin shipping between 2018-05-15 and 2018-05-18.
I'm sorry for the delay in shipping.
> 2018-04-16 Update.
Long time no see. Guys.
Alu Housing &
SUS plate &
Other Packaging material is ...
production completed.
The Leeku's PCB is scheduled to be produced on April 20th,
but ... I haven't heard from him yet.
contacting Leeku tomorrow,
If I don't get it by the April 20th,
Destroy all progress and contract with Leeku.
and... I'm thinking about making it " better " with other PCB manufacturers.
I am very upset to leeku at the After a long delay.
Owing to the constant delay in delivery
I am really sorry ...
I would like to proceed as NextStep...
=========================================================================
> 2018-02-01
Hi everyone ~!
SaiB - CP Alu Housing was arrived last night.
I'm going to do a one month, quality check & Inspection & Defect Modification request from today.
SUS Plate product schedule is Next week.
PCB LogicBoard is Last week of February (expectation)
(Attachment Link)
> 2017-12-16
GB end.
Order to Factory Complete !!!
Next Notifiacation Schedule is 2017/12/30
See you 14 days later~~
> 2017-12-08 GB Schedule update.
introduce GB Schedule. (expectation)
0. Paypal waiting ... (There are still plenty of pending amounts.)
1. ~12/15 GB / Payment End (Origin schedule +5 days)
2. 12/16 Order to factory.
3. 12/30 Pay for a factory.
4. ~ 2/15 production & waiting
5. 2/16~3/15 Inspection & Defect Modification request
6. 3/22 Defect Modification Receipt
7. 3/23~3/30 Inspection
8. Shipping Start to Yours !!!!!!
> 2017-12-04
We achieved MOQ 20.
10 More ~!! plz.
> 2017-12-01
Now.
PreOrder is Ended.
GB Form Ready & Start ~!!
Google forms : End (https://goo.gl/UTy3kw)
Please , join this !!!!
> 2017-11-28
Oh....My................God
(Attachment Link)
Delivery costs are more expensive than I expected.
Must be reflected in group buys.
I wish I had nothing to lose. :'(
> 2017-11-27
PreOrder 375 + 15 = $390
GrupBuy 395 + 37 (Add Insufficient Shipping Cost) + 18 = $450[/color]
By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.
Thanks friends.
I will keep your faith.
PreOrder prices (390) include shipping prices.
> 2017-11-26
Sorry I'm Late !!
Google forms : PreOrder Ended
Please , join this !!!!
> 2017-11-14 update
The amount has been adjusted.
Because, the TXBag plan is canceled.
I will let yours know when the next KeyPack plan is confirmed.
> 2017-11-11 update
Sorry everyone. TXBag plan was canceled.
I'm trying to find other bags or method.
=========================================================================
> Interest Checks :
2017-10-28 ~ 2017-12-01 (33 days)
> MOQ :
more than 30 (hope)
> PayPal Registration
2017-11-17 (expectation)
=========================================================================
> PreOrder Payment :
2017-11-25 ~ 2017-12-01 (6 days)
Only the deposits within the period are confirm
> PreOrder Pricing:(South Korea customs charge)
$ 390 (Housing Top / Plate / PCB / Housing Bottom)+ additional Package TXBag+ Free Shipping
=========================================================================
> Group Buy Registration
2017-12-01
> Group Buy Schedule :
2017-12-01 ~ 2018-04-01
> Group Buy Payment :
2017-12-02 ~ 2017-12-15 (14 days)
> Group buy Pricing:(South Korea customs charge)
$ 450 (Housing Top / Plate / PCB / Housing Bottom)+ additional Package TXBag+ Free Shipping
---------------------------------------------------------------
> Component
Housing : Aluminium Top & Bottom 2 piece(7 degrees angle, Weight 3.4kg)
Plate : STS Only (Laser)
Logic Board : Leeku L3 - Compact (Full SMT : not include switches)
Etc : Bolt, Bottom Pad,TXBag(CP & Light Saver Only)
Housing Color : Black, TitanGray, Silver
> Shipping Estimate:
Shipping will be from South Korea with EMS.
Shipping cost will depend on your location.
Each set weighs about 3.03 kg with packaging.
Click here to check your zone (http://eng.koreapost.go.kr/eng/sub/subpage.jsp?contId=e1010601)
Click here to check their prices in Korean Won (http://eng.koreapost.go.kr/eng/sub/subpage.jsp?contId=e1020300)
>Join Form (Example)
Order quantity : 2 ea
Color : Black 1, TitanGray 1
> Order Changes:
Please DO NOT PM me for changes
> Sample Photos :
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Mod Edit: Changed subject from [IC] to [GB].
Post by: LightningXI on Mon, 30 April 2018, 19:56:06
Hello, Everyone.
2018-05-01 Update.
I talked to Leeku on the phone last night,
We agreed to produce a PCB by two weeks later.
I will begin shipping between 2018-05-15 and 2018-05-18.
I'm sorry for the delay in shipping.
Great news!
Once shipping time comes around, I will have to confirm my address to ensure it arrives to the right location. I am anticipating a move over the next couple months.
Post by: NastyRabbit on Sat, 12 May 2018, 22:47:03
Ty
Post by: ihalatch on Mon, 14 May 2018, 02:45:53
Post by: wholypantalones on Mon, 14 May 2018, 11:44:27
Any updates? It's been 7 months. Any chances of offering bags? I'll pay for a bag if there is an option for ordering one.
No bags, PayPal protection ends around the end of this month I believe.
Quote
I will begin shipping between 2018-05-15 and 2018-05-18.
Post by: aznreaper on Mon, 14 May 2018, 11:48:23
Post by: kimbles on Wed, 16 May 2018, 13:30:42
Post by: LightningXI on Wed, 16 May 2018, 16:35:35
Hello, Everyone.
2018-05-01 Update.
I talked to Leeku on the phone last night,
We agreed to produce a PCB by two weeks later.
I will begin shipping between 2018-05-15 and 2018-05-18.
I'm sorry for the delay in shipping.
Hello, any updates?
Post by: wholypantalones on Wed, 16 May 2018, 16:41:54
Post by: amnesia0287 on Wed, 16 May 2018, 16:59:48
I just sent an email asking what's up with this since they've logged in recently and there are no updates on this.
I hope he responds soon, we are getting close to the paypal window >_<
Post by: PainMaster on Thu, 17 May 2018, 09:33:41
2018-05-17 Update.
I have just received a SUS Plate for SaiB-CP.
The reason i received it late was because
PCB Production has been delayed for next week, there was no need to receive it urgently.
(Now, PCB Production was complete. But, SMT job will ends next week.)
If i receive PCB sometime next week,
I'll packing everything In two days, May 26, 27
And, I will shipment and shipping Number update everything between May 28 ~ 31.
Lastly,
I'm very sorry that your schedule has been delayed and Really thank you for your patience.
I'll be sure to ship it within May.
[attachimg=1]
[attachimg=2]
Post by: xondat on Thu, 17 May 2018, 09:34:55
Post by: PainMaster on Thu, 17 May 2018, 09:38:39
I think you accidentally put April 26/27 instead of saying May :blank:
Hub!
Thx & I'm so sorry,
I'm in a panic.
Post by: bthezebra on Thu, 17 May 2018, 09:49:34
Post by: bryankoorean on Thu, 17 May 2018, 11:05:09
Post by: aznreaper on Thu, 17 May 2018, 11:24:59
Post by: PainMaster on Thu, 17 May 2018, 11:37:45
Stupid question but I’m joining late through a transfer. Does this pcb support qmk?
Nope, it's not QMK,
Leeku maden.
Post by: NastyRabbit on Fri, 18 May 2018, 02:27:07
Post by: PainMaster on Wed, 23 May 2018, 02:48:25
2018-05-23 Update.
The Packing Box & Screw & etc parts arrives 2days left.
Wait a little longer. :)
Post by: aznreaper on Wed, 23 May 2018, 09:06:36
Post by: PainMaster on Wed, 23 May 2018, 20:00:22
Exciting, PCB's arrive already then?
It's scheduled to arrive on Friday.
So I'm preparing ahead of time.
Post by: forumusername on Wed, 23 May 2018, 20:37:08
Post by: PainMaster on Sat, 26 May 2018, 11:54:20
update fail ...;;
Post by: PainMaster on Sat, 26 May 2018, 11:55:06
2018-05-26 Update.
Last confirmation of recipient list.
file Link :
https://drive.google.com/open?id=1X6LprONCibjTFa3LBUAcbAJ8RM1v2PXT
If the recipient has changed or address or 'ANSI or ISO' are different, please PM me.
(I can't change the color.)
This may take a few more days to process such as paypal.
Except for PCB,
Shipping Box, Packaging, Housing, Plates, Screw, etc ...
Everything is ready.
https://imgur.com/rqpTwQg
https://imgur.com/kzygiZr
https://imgur.com/Sgf35nY
PCB was Delay because there are insufficient parts in the factory
The PCB schedule is final confirmed to arrive on Tuesday (5/29).
Everywon won't be any more delay.
For three days from today
Wrap the housing, plate, etc... in a box.
When the PCB arrives on Tuesday, After examining the PCB,
it will be finalized and shipped.
Post by: PainMaster on Sun, 27 May 2018, 20:37:20
To SaiB-CP participants.
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
After packing, it will be sent in the order in which you have "Approval" it.
Post by: ihalatch on Mon, 28 May 2018, 00:15:21
Post by: Eggplant on Mon, 28 May 2018, 00:30:08
2018-05-28 Update
To SaiB-CP participants.
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
After packing, it will be sent in the order in which you have "Approval" it.
email sent
Post by: Ponkan on Mon, 28 May 2018, 00:36:16
Post by: angelafreet on Mon, 28 May 2018, 03:46:38
Post by: poolside on Mon, 28 May 2018, 04:55:44
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
Is that 9422 or 9421?
Post by: wholypantalones on Mon, 28 May 2018, 06:41:57
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
Is that 9422 or 9421?
I have an email conversation with both addresses in it.. so probably just the one that was specified.
Post by: PainMaster on Mon, 28 May 2018, 14:04:55
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
Is that 9422 or 9421?
email is 9422.
Post by: poolside on Mon, 28 May 2018, 14:10:22
Post by: wholypantalones on Mon, 28 May 2018, 14:38:00
Post by: aznreaper on Tue, 29 May 2018, 00:17:37
Post by: wholypantalones on Thu, 31 May 2018, 20:30:12
Hello, Everyone.
2018-05-26 Update.
Last confirmation of recipient list.
file Link :
https://drive.google.com/open?id=1X6LprONCibjTFa3LBUAcbAJ8RM1v2PXT
If the recipient has changed or address or 'ANSI or ISO' are different, please PM me.
(I can't change the color.)
This may take a few more days to process such as paypal.
Except for PCB,
Shipping Box, Packaging, Housing, Plates, Screw, etc ...
Everything is ready.
https://imgur.com/rqpTwQg
https://imgur.com/kzygiZr
https://imgur.com/Sgf35nY
PCB was Delay because there are insufficient parts in the factory
The PCB schedule is final confirmed to arrive on Tuesday (5/29).
Everywon won't be any more delay.
For three days from today
Wrap the housing, plate, etc... in a box.
When the PCB arrives on Tuesday, After examining the PCB,
it will be finalized and shipped.
I'm gonna go ahead and guess that the PCBs haven't arrived yet.
Post by: aznreaper on Sat, 02 June 2018, 18:30:32
Post by: PainMaster on Sat, 02 June 2018, 21:43:34
Haven't seen any tracking numbers or anything either, anyone else having any luck? Painmaster, any updates?
yup.
i'm going to update all current situations this evening.
Post by: PainMaster on Mon, 04 June 2018, 01:51:53
I just talked to Leeku.
The missing part (LED Drive IC) arrived at the factory on 05/31.
PCB Production is due this week.
I think..... finally I can get it !!!!
... A.N.D.
The first thing i'll do is rush shipping.
:-[
Post by: PainMaster on Wed, 06 June 2018, 20:22:20
The schedule is finally confirmed.
They (factory) send me the PCB on 2018/06/09
I think I'll get it on the 2018/06/12.
From the 2018/06/13, I will send it in the order you approved it.
I see the end...
[attachimg=1]
Post by: PainMaster on Wed, 06 June 2018, 23:04:12
Post by: PainMaster on Wed, 06 June 2018, 23:05:30
2018-05-28 Update
To SaiB-CP participants.
After check your address and options,
please send me a your paypal email & geekhack nickname & "Approval" by email (cjakma9422@gmail.com)
After packing, it will be sent in the order in which you have "Approval" it.
five people haven't confirmed the address yet.
Please send me a confirmation mail.
- MechanicalElement
- Vloshko
- robotsokk
- Jeff Kim
- forumusername
Post by: PainMaster on Sat, 09 June 2018, 03:54:45
I'm preparing for shipping.
Because, PCB arrived earlier than expected,
I'm glad I got time to check it out.
I'll be Check the PCB today / tomorrow.
shipping is start at 2018/06/13.
[attachimg=1]
[attachimg=2]
- it's black PCB for SaiB
five people haven't confirmed the address yet.
please send me a your paypal email & geekhack nickname & "Approval" by email
(cjakma9422@gmail.com)
- MechanicalElement
- Vloshko
- robotsokk
- Jeff Kim
- forumusername
Post by: forumusername on Sat, 09 June 2018, 07:42:52
Sent from my PH-1 using Tapatalk
Post by: aznreaper on Sat, 09 June 2018, 11:54:13
Post by: Vloshko on Sat, 09 June 2018, 16:22:37
Post by: PainMaster on Tue, 12 June 2018, 11:59:08
PCB Inspection completed.
Packing starts tomorrow.
I am so tired ...
> Completed.
[attachimg=1]
> Error.
[attachimg=2]
Post by: bthezebra on Tue, 12 June 2018, 12:20:46
2018-06-13 Update.Thanks for all your efforts Pain!
PCB Inspection completed.
Packing starts tomorrow.
I am so tired ...
> Completed.
(Attachment Link)
> Error.
(Attachment Link)
Post by: aznreaper on Thu, 14 June 2018, 00:37:29
Post by: angelafreet on Sat, 16 June 2018, 06:47:10
Post by: lyk503 on Mon, 18 June 2018, 13:32:15
Post by: aznreaper on Wed, 20 June 2018, 09:59:24
Post by: PainMaster on Thu, 21 June 2018, 01:28:32
First of all
I am sorry that I have not been able to respond to your contacts.
I've been in huge panic for the last 7 days.
last week 14th,
While preparing to ship as promised to you...
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
I found a Large error in the product.
[attachimg=5]
[attachimg=6]
As a result of the argument with the factory over the last seven days,
Throw away all the defective parts,
and I decided to make a new partz and ship it at my own money.
[attachimg=7]
My first co-producing engagement & the promise with yours was more important than anything else.
This is a decision made to ensure correct quality.
The new partz will take about 5 weeks to make.
(including both QC and anodizing periods)
I'm really really sorry for the shipment that was Sooooooooooo delayed.
I promise to update every seven days from today.
I will keep my word with you to the end.
Post by: aznreaper on Thu, 21 June 2018, 10:17:56
Is the defective issues just those two screw holes? If that's true, and the plate can still screw into the top piece, would you consider selling the defect kits at a discount?
Post by: LightningXI on Thu, 21 June 2018, 10:26:34
Ah, bummed to hear/see that. I guess we'll have to wait a bit longer then. PainMaster, please confirm my last address change - I emailed you some time ago.
Post by: PainMaster on Thu, 21 June 2018, 22:59:23
:eek: I'm surprised that wasn't caught in your initial QC... well, I guess we'll just have to wait a little longer. Happy to hear you're willing to keep us updated at least once a week though.
Is the defective issues just those two screw holes? If that's true, and the plate can still screw into the top piece, would you consider selling the defect kits at a discount?
Because I confirmed the final drawing.
I didn't expect to work with old... drawings.
Yes, those two holes are wrong.
To press firmly around the hall, The final decision is to change the position of the hall.
[attachimg=1]
[attachimg=2]
Also, all error TOPs are collected and sent back to the factory.
I can't afford to think of a discount sale yet.
Post by: kimbles on Tue, 26 June 2018, 17:35:45
Post by: PainMaster on Sat, 30 June 2018, 12:36:18
At the request of the factory
Last drawings confirmed (only check)
Next Friday (Maybe July 6th)
Aluminium materials are will arriving.
Post by: PainMaster on Thu, 05 July 2018, 23:10:15
2nd Product Sample.
[attachimg=1]
Reject !!!!
Next Sample schedule is Next week 9th.
Post by: PainMaster on Mon, 09 July 2018, 21:46:57
Last weekend, I picked up the 35 top housing from the factory,
And We have once again inspected the entire shipment.
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
I conducted inspection and basic packaging with my younger brothers.
We are going to repair request 6 out of the 35 newly produced top Housing (the remaining 27 have been inspected).
[attachimg=8]
[attachimg=6]
[attachimg=7]
Checking and packing ...
[attachimg=9]
[attachimg=10]
[attachimg=11]
The actual delivery will begin next week.
I'm sorry to Delay
Post by: packman86 on Mon, 09 July 2018, 23:28:31
> 2018-07-10 Update.
Last weekend, I picked up the 35 top housing from the factory,
And We have once again inspected the entire shipment.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
I conducted inspection and basic packaging with my younger brothers.
We are going to repair request 6 out of the 35 newly produced top Housing (the remaining 27 have been inspected).
(Attachment Link)
(Attachment Link)
(Attachment Link)
Checking and packing ...
(Attachment Link)
(Attachment Link)
(Attachment Link)
The actual delivery will begin next week.
I'm sorry to Delay
Fun family bonding time!
Good luck with shipment! Those look awesome!
Post by: aznreaper on Tue, 10 July 2018, 00:01:58
Post by: LightningXI on Tue, 10 July 2018, 00:45:18
> 2018-07-10 Update.
Last weekend, I picked up the 35 top housing from the factory,
And We have once again inspected the entire shipment.
I conducted inspection and basic packaging with my younger brothers.
The actual delivery will begin next week.
I'm sorry to Delay
Aw, man, that's some quality time with the younger brothers.
Thank you so much for your diligence. I look forward to these!
Post by: avid on Tue, 10 July 2018, 04:34:21
Post by: bthezebra on Tue, 10 July 2018, 08:01:27
Post by: dubious on Tue, 10 July 2018, 15:08:32
Post by: PainMaster on Sun, 15 July 2018, 20:47:55
Last Weekend, I picked up the (Last) 6 top housing from the factory.
And, I Build TitanGray Sample of realThing.
All the configurations are complete.
After final inspection
Shipment will begin this week!
> TitanGray Sample Mobile Cut
[attachimg=1]
[attachimg=2]
> TitanGray Sample Home Cut
[attachimg=3]
[attachimg=4]
[attachimg=5]
> TitanGray Sample Studio Cut
[attachimg=6]
[attachimg=7]
[attachimg=8]
[attachimg=9]
[attachimg=10]
Post by: packman86 on Sun, 15 July 2018, 22:05:14
Good job!
Post by: LightningXI on Mon, 16 July 2018, 04:39:17
> 2018-07-16 UpdateCan't wait for shipping! Thanks for sharing pictures.
Last Weekend, I picked up the (Last) 6 top housing from the factory.
And, I Build TitanGray Sample of realThing.
All the configurations are complete.
After final inspection
Shipment will begin this week!
> TitanGray Sample Mobile Cut
(Attachment Link)
(Attachment Link)
> TitanGray Sample Home Cut
(Attachment Link)
(Attachment Link)
(Attachment Link)
> TitanGray Sample Studio Cut
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Sent from my mobile using Tapatalk
Post by: MechanicalElement on Thu, 19 July 2018, 18:45:36
Post by: PainMaster on Fri, 20 July 2018, 02:12:36
almost ready to ship.
Unfortunately, 2 black housing were found to be defective.
[attachimg=1]
[attachimg=2]
[attachimg=3]
Refund is going to in between July 31 and August 7 (two weeks later).
If anyone wants to buy the defective Housing,
I'll discount sale for two black only.
Post by: forumusername on Fri, 20 July 2018, 07:47:43
Post by: PainMaster on Mon, 23 July 2018, 20:10:48
Domestic Delivery Complete.
International shipping begins tomorrow.
[attachimg=1]
Post by: LightningXI on Mon, 23 July 2018, 21:45:31
> 2018-07-24 Update.
Domestic Delivery Complete.
International shipping begins tomorrow.
(Attachment Link)
Hi PainMaster, please confirm my change of address before you ship my order.
Post by: PainMaster on Wed, 25 July 2018, 02:42:11
Check your shipping Order.
#0 - Complete
#1 - Complete
#2 - Complete
#3 - Complete
#4 - Complete
#6 - Complete
#7 - Shipment Two days later
#8 - Shipment Two days later
#9 - Shipment Two days later
#10 - Shipment Two days later
#11 - Shipment Two days later
#12 - Shipment Two days later
#13 - Shipment Two days later
#14 over - Scheduled
Post by: Ponkan on Sun, 29 July 2018, 20:14:05
Post by: idlemao on Sun, 29 July 2018, 20:31:29
Post by: PainMaster on Wed, 01 August 2018, 02:34:21
Sorry, i'm Late
Check your shipping Order.
#0 - Complete
#1 - Complete
#2 - Complete
#3 - Complete
#4 - Complete
#5 - Send
#6 - Complete
#7 - Send
#8 - Send
#9 - Send
#10 - Send
#11 - Send
#12 - Send
#14 - Send
#15 - Shipment tomorrow
#17 - Shipment tomorrow
#18 - Shipment tomorrow
#19 - Shipment tomorrow
#20 - Shipment tomorrow
#21 - Shipment tomorrow
#22 - Shipment tomorrow
Post by: Vloshko on Wed, 01 August 2018, 10:26:39
Post by: LightningXI on Wed, 01 August 2018, 14:15:39
> 2018-08-01 Update.
Sorry, i'm Late
Check your shipping Order.
#0 - Complete
#1 - Complete
#2 - Complete
#3 - Complete
#4 - Complete
#5 - Send
#6 - Complete
#7 - Send
#8 - Send
#9 - Send
#10 - Send
#11 - Send
#12 - Send
#13 - Cancel
#14 - Send
#15 - Shipment tomorrow
#16 - Cancel
#17 - Shipment tomorrow
#18 - Shipment tomorrow
#19 - Shipment tomorrow
#20 - Shipment tomorrow
#21 - Shipment tomorrow
#22 - Shipment tomorrow
Hey PainMaster - I finally received my package. I noticed there is a groove on the bottom for a weight. Will you be running a GB for a weight and its screws?
Post by: aznreaper on Wed, 01 August 2018, 14:19:05
Post by: LightningXI on Wed, 01 August 2018, 14:31:03
Pretty sure he said during the ic that he didn't plan to do a GB for a weight, I'd be interested though. Did you guys get tracking numbers when he sent out the board?
Bummer about the weight. I was hoping to see a cool weight there. I hope we can get the measurements though for both the weight and the screws that would hold it.
I didn't get tracking info. It just showed up.
Post by: Vloshko on Wed, 01 August 2018, 16:54:11
Post by: dubious on Wed, 01 August 2018, 16:59:22
Anyone on the West Coast or close to there get their board yet?West coast here. I've received mine, but they weren't all sent out at the same time so it's irrelevant.
Post by: odd on Mon, 06 August 2018, 20:41:58
Anyone on the West Coast or close to there get their board yet?
I'm in the Bay Area and got mine last Friday.
Post by: forumusername on Mon, 06 August 2018, 20:46:26
edit:
I have now sent the approval email 3 times.
Post by: Eggplant on Mon, 06 August 2018, 20:53:20
Here are some pictures of it next to my tx-cp:
[attach=1]
[attach=2]
(67g Zilents, Zeal Stabs, GMK Laser, DC Mini Reaper on the left, Keyforge Snek and Spook on the right)
I and I'm sure everyone else appreciate all the effort and complications you had to endure PainMaster!
Thank you for putting everything together and ensuring such a fantastic product made it into all of our hands! :thumb:
Post by: kimbles on Tue, 07 August 2018, 11:50:02
Post by: PainMaster on Wed, 08 August 2018, 02:08:12
SaiB - CP GroupBuy Complete !!!
Send Clear !!!
I'm really sorry for the late shipment.
There is a lot of business issues. (Server down / Traffic over / etc etc... T^T) - Damn Openfire Custom !!!
I was out of time to shipping.
It was very difficult to Packaging.
because, I ordered the box Sooooooooooooooooo big.
I didn't expect the delivery charge to be this expensive.
I've lost money a little, but it's okay.
It's my first challenge, Anyway I've done it.
add 1)
The Bottom weight plate design document will be open.
add 2)
Details of defective products Starting tomorrow,
Shipping is scheduled for 8/14.
add 0)
Last time refund processing is priority...
#0 - Complete
#1 - Complete
#2 - Complete
#3 - Complete
#4 - Complete
#5 - Complete
#6 - Complete
#7 - Complete
#8 - Complete
#9 - Complete
#10 - Complete
#11 - Complete
#12 - Complete
#13 - Cancel
#14 - Complete
#15 - Send
#16 - Cancel
#17 - Send
#18 - Send
#19 - Send
#20 - Send
#21 - Send
#22 - Send
[attachimg=1]
Post by: angelafreet on Wed, 08 August 2018, 17:44:56
http://playkeyboard01.pixnet.net/blog/post/204519983-saib-cp-%e9%8d%b5%e7%9b%a4%e5%a5%97%e4%bb%b6-keyboard-kit-review
Post by: haitacxyz on Sun, 12 August 2018, 09:01:33
Post by: forumusername on Mon, 13 August 2018, 18:59:28
Thanks in advance all
Post by: aznreaper on Tue, 14 August 2018, 16:01:12
Post by: aznreaper on Wed, 15 August 2018, 00:38:05
Looking forwards to building this one, it took a while, but the value of this board was amazing.
Thanks Painmaster for making this happen!
Post by: PainMaster on Sat, 18 August 2018, 11:09:16
I had a very hard time after delivery.
Did you get all the shipping?
PS : Refund complete! & time to sell the defective product!
Post by: liillliillliiii on Sat, 18 August 2018, 13:39:27
I have not received anything for #17. Can you email/pm me a tracking number?
Thanks
Post by: kimbles on Sat, 18 August 2018, 18:23:52
수고했어요!
Post by: PainMaster on Sun, 19 August 2018, 07:29:41
PainMaster,
I have not received anything for #17. Can you email/pm me a tracking number?
Thanks
Post by: PainMaster on Sun, 19 August 2018, 07:41:39
PainMaster,
I have not received anything for #17. Can you email/pm me a tracking number?
Thanks
SaiB - CP arrived nearby on August 10.
It is reported that the address was incorrect and could not be shipped.
Hurry up and check.
Post by: PainMaster on Mon, 20 August 2018, 02:45:20
> issue
The firmware version did not match as a result of testing and finding that the RGB control of the latest tool was incorrect.
> Solution
Please upload the latest version of the firmware.
> the latest version firmware
[attachurl=1]
1. unzip
2. SaiB-CP connect
3. Run loadfw.bat
> the latest version JigOn (keymapping Tool)
[attachurl=2]
Post by: Sshimosawa on Tue, 21 August 2018, 19:38:23
If not, OP would you mind sharing the measurements of the slot on the underside if you have it?
Post by: PainMaster on Tue, 21 August 2018, 23:35:16
Has anyone made a brass weight for theirs?
If not, OP would you mind sharing the measurements of the slot on the underside if you have it?
The bottom's weight plate document will be opened.
I'm looking for an error.
Post by: Sshimosawa on Wed, 22 August 2018, 00:06:39
Post by: Vloshko on Fri, 24 August 2018, 18:41:49
Post by: LightningXI on Fri, 24 August 2018, 20:52:07
Board received, starting build soon, will post photos of everything.
Best of luck, and excited to see the build log!
Post by: PainMaster on Sun, 26 August 2018, 23:26:07
Board received, starting build soon, will post photos of everything.
Looking forward to it!
Post by: Sshimosawa on Sun, 02 September 2018, 19:22:16
Post by: bthezebra on Mon, 03 September 2018, 21:34:40
Post by: PainMaster on Mon, 03 September 2018, 22:29:53
Finally built mine can't wait to bring to work tomorrow :)Show Image(https://uploads.tapatalk-cdn.com/20180904/cd1ed77f1db53019e3bc1e6caa6b6b89.jpg)
[attachimg=1]
[attachimg=2]
it's My workSet :)
Post by: ihalatch on Tue, 04 September 2018, 23:14:02
Post by: bthezebra on Tue, 04 September 2018, 23:29:57
I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?A weight was never included but a few posts above some users might be looking to get one made. I would hop on one of those if they open it to the group and would also be interested in a polycarbonate plate for softer typing feel.
Post by: LightningXI on Wed, 05 September 2018, 00:16:02
I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?
It wasn't included in the base kit, so PainMaster should be sharing the files for owners to get their own independently.
add 1)
The Bottom weight plate design document will be open.
Hey PainMaster, have you shared the plate and weight design file yet? If not, it would be nice to have it released so people can figure out a way to get a weight done for their SaiB-CPs
Post by: zoois on Tue, 11 September 2018, 04:48:30
-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT
Thank you so much PainMaster!
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
Post by: LightningXI on Tue, 11 September 2018, 05:45:54
Here is my build.Wow great attention to detail. Looks absolutely phenomenal.
-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT
Thank you so much PainMaster!
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Sent from my mobile using Tapatalk
Post by: PainMaster on Tue, 11 September 2018, 07:23:58
Here is my build.
-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT
Thank you so much PainMaster!
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
WOW- It's My Pleasure :)
Post by: donut_sauce on Tue, 11 September 2018, 07:31:13
Here is my build.This board is amazing wow!
-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT
Thank you so much PainMaster!
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Post by: PainMaster on Fri, 28 September 2018, 02:39:57
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
[attachurl=1]
Post by: Sshimosawa on Fri, 28 September 2018, 03:05:44
Post by: LightningXI on Fri, 28 September 2018, 11:55:21
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)
Thank you!! Now to find out if someone could help us make a weight...
Post by: Eggplant on Fri, 28 September 2018, 12:08:02
Count me in, if someone can make it happen.
Post by: wholypantalones on Fri, 28 September 2018, 22:06:49
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)
Thank you!! Now to find out if someone could help us make a weight...
What aboot that lazerboost place?
Post by: ihalatch on Sun, 30 September 2018, 03:32:30
(http://i.imgur.com/imdzwvc.jpg) (https://imgur.com/imdzwvc)
(http://i.imgur.com/7OsI3y4.jpg) (https://imgur.com/7OsI3y4)
(http://i.imgur.com/W95cARW.jpg) (https://imgur.com/W95cARW)
(http://i.imgur.com/8l8Ocro.jpg) (https://imgur.com/8l8Ocro)
Post by: LightningXI on Sat, 20 October 2018, 01:45:52
Post by: PainMaster on Sat, 20 October 2018, 02:51:14
Edit: asked a dumb question.
Hmm ?? :)
Post by: LightningXI on Sat, 20 October 2018, 09:51:02
Edit: asked a dumb question.
Hmm ?? :)
Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.
Post by: PainMaster on Sat, 20 October 2018, 17:46:51
Edit: asked a dumb question.
Hmm ?? :)
Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.
I planned switch plate only STS.
But, Because you're often asking, I'll consider it.
Brass ?, Alu?
Post by: bthezebra on Sat, 20 October 2018, 18:11:09
I'd love polycarbonate personally :)Edit: asked a dumb question.
Hmm ?? :)
Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.
I planned switch plate only STS.
But, Because you're often asking, I'll consider it.
Brass ?, Alu?
Post by: LightningXI on Sat, 20 October 2018, 18:29:57
Edit: asked a dumb question.
Hmm ?? :)
Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.
I planned switch plate only STS.
But, Because you're often asking, I'll consider it.
Brass ?, Alu?
I would do brass and/or polycarbonate.
Post by: Carlobv on Mon, 05 November 2018, 08:41:17
Post by: dubious on Mon, 05 November 2018, 15:53:30
Edit: asked a dumb question.
Hmm ?? :)
Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.
I planned switch plate only STS.
But, Because you're often asking, I'll consider it.
Brass ?, Alu?
My vote is for PC or brass!
Post by: flying1911 on Sat, 16 February 2019, 22:48:12
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Post by: LightningXI on Sun, 17 February 2019, 02:49:34
Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Cool observation. Much appreciated that you've decide to share the finding and the file. Do you have pics of what this ended up looking like?
Post by: flying1911 on Sun, 17 February 2019, 03:20:38
Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Cool observation. Much appreciated that you've decide to share the finding and the file. Do you have pics of what this ended up looking like?
For sure:
(https://i.imgur.com/ddazzzQ.jpg)
I've only tried it with black mica, which cost like $2 for the piece and it looks pretty good. Will definitely come to a more permanent solution such as stainless steel in the future.
Post by: LightningXI on Sun, 17 February 2019, 03:25:55
Wow, very neat. If you manage to do it in metal, and you have to edit the file again (since you have to still shave off a few milimeters) would you mind sharing that again? I'd be interested in getting one done in steel as well.Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Cool observation. Much appreciated that you've decide to share the finding and the file. Do you have pics of what this ended up looking like?
For sure:Show Image(https://i.imgur.com/ddazzzQ.jpg)
I've only tried it with black mica, which cost like $2 for the piece and it looks pretty good. Will definitely come to a more permanent solution such as stainless steel in the future.
Post by: flying1911 on Sun, 17 February 2019, 05:53:20
Good luck with your project, I'm sure it'll be worth it :thumb: :thumb:
Post by: forumusername on Fri, 22 February 2019, 10:19:31
Post by: yaya on Tue, 05 March 2019, 11:52:19
Post by: forumusername on Tue, 02 April 2019, 22:21:22
Post by: Vloshko on Sun, 21 April 2019, 18:33:41
Post by: Vloshko on Sun, 21 April 2019, 18:38:14
I either lost the screws that came with my kit or didn't get them... in either case can someone educate me on what screws I need for the kit please and thank you
9/16" long
Strangely looks like 2/10 cm diameter
Post by: forumusername on Sun, 21 April 2019, 18:43:25
Thank you!I either lost the screws that came with my kit or didn't get them... in either case can someone educate me on what screws I need for the kit please and thank you
9/16" long
Post by: Vloshko on Wed, 24 April 2019, 21:34:30
Post by: LightningXI on Wed, 24 April 2019, 21:37:52
Is there supposed to be a gasket for this for the leds?Not really. Mine has the LEDs on.
Post by: forumusername on Sun, 28 April 2019, 18:05:17
I am actually a little confused on what you are referring to any way you could link me or if anyone else could chime in I'd greatly appreciate it!I either lost the screws that came with my kit or didn't get them... in either case can someone educate me on what screws I need for the kit please and thank you
9/16" long
Strangely looks like 2/10 cm diameter
Post by: yaya on Mon, 29 April 2019, 07:34:36
I either lost the screws that came with my kit or didn't get them... in either case can someone educate me on what screws I need for the kit please and thank you
Pretty sure they are twelve M3 x 15mm countersunk allen screws
Post by: Carlobv on Thu, 09 May 2019, 09:20:48
I spilled some beer on my board last night. I disconnected from the computer and cleaned it. It didn't seem too bad.
Nothing worked on reconnect, but I loaded new firmware and was able to connect. Everything is working fine until I disconnect from usb. When I reconnect, I hear the "something is connecting via usb sound," but the board doesn't work until I flash the firmware again.
Any ideas?
Post by: dubious on Thu, 09 May 2019, 18:31:08
Hey guys, troubleshooting question if anyone can help:
I spilled some beer on my board last night. I disconnected from the computer and cleaned it. It didn't seem too bad.
Nothing worked on reconnect, but I loaded new firmware and was able to connect. Everything is working fine until I disconnect from usb. When I reconnect, I hear the "something is connecting via usb sound," but the board doesn't work until I flash the firmware again.
Any ideas?
Something is probably fried if it wont hold firmware, but it's possible something is being shorted. How long did you wait until you plugged it back in, and did you do anything besides just wipe up the beer? (Like put the pcb/plate/switches in rice, or silica or wtvr)
Post by: Puddsy on Thu, 09 May 2019, 18:42:43
Hey guys, troubleshooting question if anyone can help:
I spilled some beer on my board last night. I disconnected from the computer and cleaned it. It didn't seem too bad.
Nothing worked on reconnect, but I loaded new firmware and was able to connect. Everything is working fine until I disconnect from usb. When I reconnect, I hear the "something is connecting via usb sound," but the board doesn't work until I flash the firmware again.
Any ideas?
sounds like something the controller fried or is shorting
might be worth going over those contacts with a bit of iso alcohol and seeing if that helps
but if it doesn't hold firmware it's probably screwed
Post by: PainMaster on Thu, 20 June 2019, 00:54:05
I read this by chance.
I'm surprised that communication happen yet.
Thank you very much for your interest. !!!
If you have any questions, please tell me in the comments.
I'll answer as much as I can.
-----------------------------------------------------
During the production of SAB-CP,
In order not to reproduce the hard work that had to be done unintentionally,
I'm developing our own PCB (with QMK).
[attachimg=1]
Post by: PainMaster on Thu, 20 June 2019, 00:56:42
WOW -
I read this by chance.
I'm surprised that communication happen yet.
Thank you very much for your interest. !!!
If you have any questions, please tell me in the comments.
I'll answer as much as I can.
-----------------------------------------------------
During the production of SAB-CP,
In order not to reproduce the hard work that had to be done unintentionally,
I'm developing our own 3 types PCB (with QMK).
80%
60%
OTD replica
(http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5822124)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Post by: LightningXI on Thu, 20 June 2019, 02:52:04
This looks promising and exciting. Now, where to find an OTD so I can use that latter PCB....WOW -
I read this by chance.
I'm surprised that communication happen yet.
Thank you very much for your interest. !!!
If you have any questions, please tell me in the comments.
I'll answer as much as I can.
-----------------------------------------------------
During the production of SAB-CP,
In order not to reproduce the hard work that had to be done unintentionally,
I'm developing our own 3 types PCB (with QMK).
80%
60%
OTD replica
(http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5822124)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Post by: poolside on Thu, 20 June 2019, 17:28:33
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)
Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Hey PainMaster, could you please release a fixed weight plate file? Did you have weight plates made for your personal SaiB-CPs?
The plate corner radius in your original file seems to be incorrect. It is about 5.5mm whereas the actual bottom piece weight plate cutout has corner radiuses closer to 10mm.
Post by: PainMaster on Fri, 21 June 2019, 00:24:18
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)Hi everyone, I'm not sure if this would still help, but I want to point out the fact that the runner's uploaded drawing of the bottom plate is incorrect in the four corners. I was able to ask a friend of mine of modify the drawing so that it would fit in the cutout on the bottom, and you can download it below.
Please note that the thickness of the plate is 3mm, and while it was the best my friend could do off of the original drawing, it's still not a 100% fit. I had to shave off 2 corners of the plate a bit further, but the result was more than ok, at least better than having an empty space.
Hey PainMaster, could you please release a fixed weight plate file? Did you have weight plates made for your personal SaiB-CPs?
The plate corner radius in your original file seems to be incorrect. It is about 5.5mm whereas the actual bottom piece weight plate cutout has corner radiuses closer to 10mm.
I'll check this. :)
Post by: PainMaster on Mon, 24 June 2019, 20:55:39
> 2018-09-28 Update.
SaiB - CP's Bottom weight plate Document Open !
You can edit it, as long as you specify the source (SaiB - CP).
(Attachment Link)
It looks like it's going to be tight.
The figures on the drawing are correct.
put up the 0.5mm cut drawings.
[attachimg=1]
Post by: poolside on Thu, 27 June 2019, 06:34:38
If corner radiuses don't match, the weight plate won't fit into the bottom piece cutout (?).
[attach=1]
[attach=2]
Post by: LightningXI on Thu, 25 July 2019, 08:48:04
Thanks for taking the time to review the plate file.
If corner radiuses don't match, the weight plate won't fit into the bottom piece cutout (?).
(Attachment Link)
(Attachment Link)
Did this ever end up being resolved?
Post by: poolside on Thu, 25 July 2019, 16:54:14
Post by: Vloshko on Thu, 22 August 2019, 11:48:08
[attachimg=2]
[attachimg=3]