[GB]Revo&Dr.D keyboard

[Moistgun]

I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?
I'd like to make a custom plate from materials i want and with switch top removal cutouts.

I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.

That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.

Thanks for taking it into consideration. 

T0m, It would be really great if you shared your outcome with the rest of us.

Would love a plate with switch top opening

Yeah Revo offered me carbon fiber plate for 30$, and i took it beacuse it is really good offer.

So if someone want an carbon fiber plate, i think you can still pm Revo for it. Maybe you can get it as extra.

:O

Does it allow for switch top opening?

It looks like it does, would like a confirmation if possible

[RevoTeam]

I am sitting on the fence. How are the chances you can share with us the svg file for the plate (switchplate)?
I'd like to make a custom plate from materials i want and with switch top removal cutouts.

I think we can share the file for the plate,but i am not sure it's svg file. I'll talk to Dr.D and get back to you.

That would be very nice, if you can share those with us. I mean i can reverse engineer the plate its not that hard, however getting the original draws makes it much easier.

Thanks for taking it into consideration. 

T0m, It would be really great if you shared your outcome with the rest of us.

Would love a plate with switch top opening

Yeah Revo offered me carbon fiber plate for 30$, and i took it beacuse it is really good offer.

So if someone want an carbon fiber plate, i think you can still pm Revo for it. Maybe you can get it as extra.

:O

Does it allow for switch top opening?

Well, that's all depend on the buyer, if they tell me they want it,i'll do it. But the alu and pc plate won't support switch opening.

[swimmingbird]

Can I confirm that there is a colour choice for all components and not just the middle layer? e.g. silver top and bottom with pink middle?

[joey]

Can I confirm that there is a colour choice for all components and not just the middle layer? e.g. silver top and bottom with pink middle?

Yes. Each piece (top, middle, bottom) can be a different colour.

[swimmingbird]

Can I confirm that there is a colour choice for all components and not just the middle layer? e.g. silver top and bottom with pink middle?

Yes. Each piece (top, middle, bottom) can be a different colour.

oh lawd

[Moistgun]

Just wondering what everyone else ended up getting


I got a

Silver case with the blue middle, with a silver AND extra blue plate

hoping to match that with hydro early next year!

[joey]

Just wondering what everyone else ended up getting


I got a

Silver case with the blue middle, with a silver AND extra blue plate

hoping to match that with hydro early next year!

black pink black.

[Moistgun]

Just wondering what everyone else ended up getting


I got a

Silver case with the blue middle, with a silver AND extra blue plate

hoping to match that with hydro early next year!

black pink black.

Nice one Joey.

there is a killer pic of that combo in the IC thread.

Looks really nice.

[Data]

I also went with silver - blue - silver and a blue plate. Seemed like the thing to do. 

I'll most likely put Skeletor on this board. The splash of blue made the most sense.

[kokokoy]

Another silver here. But I'm silver-gray-silver, silver plate and an extra orange mid since the wife says I need color in my life. Haha..

Not sure what I'll put on these but I have an OG dyesub that I've been itching to use.

[Prelim]

no ISO... 

Can you explain why the pcb doesn't support ISO? Because it's a very easy thing to implement

[JDragon]

Black-Navy-Black with an extra gold middle and gold plate. Gold is my preferred option but since it wasn't a supported color I got the Navy just in case it didn't turn out well.

[joey]

Any news RevoTeam?

[Moistgun]

Kind of wish I picked up an extra middle piece 

[RevoTeam]

Any news RevoTeam?

It's national holiday in China now,so i will update after holiday.

[joey]

Any news RevoTeam?

It's national holiday in China now,so i will update after holiday.

Enjoy!

[KHAANNN]

Missed this bad :[

Would love to get a set if you ever turn the operation into something like winkeyless.kr (with direct credit card payments)

I'm kind of glad I missed it too, I would probably have a stroke trying to decide between the colors, the pink one is so alluring

[Moistgun]

Any news RevoTeam?

It's national holiday in China now,so i will update after holiday.

Is it still holiday?

[MMKB]

Any news RevoTeam?

It's national holiday in China now,so i will update after holiday.

Is it still holiday?

Nope

[S0L]

Any updates? 

[RevoTeam]

I got some updates,people. Sorry for the long wait,but we are still in schedule.

[garoti]

Good, Hope we have a great group buy

[Moistgun]

I got some updates,people. Sorry for the long wait,but we are still in schedule.

What do you mean by "I got some updates"

[MMKB]

I got the Revo numpad after a month of delay. Issues and delays in engineering is pretty understandable but still timely communication is much appreciated.

[Moistgun]

I got the Revo numpad after a month of delay. Issues and delays in engineering is pretty understandable but still timely communication is much appreciated.

How do you like the revo numpad? quality and design wise?

anyone know if this is the same manufacturer?

[henz]

looking to sell my orded, silver board and blue d, also with extra plate.

[RevoTeam]

I got the Revo numpad after a month of delay. Issues and delays in engineering is pretty understandable but still timely communication is much appreciated.

How do you like the revo numpad? quality and design wise?

anyone know if this is the same manufacturer?

Yes, I run that pad on MD. Same quality

[poolside]

Updates here:

We are currently CNCing the alu. I got some picture from the factory.After finish CNC,we will send them to the anode factory.I'll update when that happens.

Thanks,

(Attachment Link)
(Attachment Link)

Thanks for the update. I had not noticed there was a reserved post on the first page. 

[Data]

I got the Revo numpad after a month of delay. Issues and delays in engineering is pretty understandable but still timely communication is much appreciated.

How do you like the revo numpad? quality and design wise?

anyone know if this is the same manufacturer?

I have it.  Same Revo.







The quality is up there with Oddforge (VE.A) or any of the recent Korean customs.  They're legit.

[Moistgun]

Thanks for the update. I had not noticed there was a reserved post on the first page. 

Thanks for catching this man, I hadn't noticed it either.

I have it.  Same Revo.

Show Image

Show Image

Show Image

The quality is up there with Oddforge (VE.A) or any of the recent Korean customs.  They're legit.

Great to hear man, thanks for sharing. very exciting :D

[romevi]

Dang. Should've just gotten the Revo num pad!

[Moistgun]

Dang. Should've just gotten the Revo num pad!

I hate you so much

[poolside]

May we expect a matching Dr.D numpad someday, with the middle plate and the slant on the backside?

[Moistgun]

If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know.

[RevoTeam]

May we expect a matching Dr.D numpad someday, with the middle plate and the slant on the backside?

You can! i'll talk to Dr.D see if he is interested

[RevoTeam]

If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know.

There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol

[RevoTeam]

Dang. Should've just gotten the Revo num pad!

Actually, MD have talked to me about open the keypad again.But my factory are too busy,i don't want people to wait.There will be a third run,just not right now.

[Moistgun]

If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know.

There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol

Haha, well thanks for the info!

[joey]

If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know.

There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol

Haha, well thanks for the info!

Hmmm. Now I can sell my one-off half plate for like $1000!!!

[Fictiouz]

If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know.

There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol

Haha, well thanks for the info!

Hmmm. Now I can sell my one-off half plate for like $1000!!!

:dolphin:

[Moistgun]

If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know.

There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol

Haha, well thanks for the info!

Hmmm. Now I can sell my one-off half plate for like $1000!!!

Joey pls

[RevoTeam]

If anyone would be interested in trading their partial alu or polycarbonate plate for my full alu play, let me know.

There will be some PC plate leftovers, however almost everyone chose full plate. There's only one partial alu plate out there. lol

Haha, well thanks for the info!

Hmmm. Now I can sell my one-off half plate for like $1000!!!

Good choice,my friend! i never saw this coming.

[RevoTeam]

For anyone who want the keypad, i highly recommend the silver one, i just receive a picture from my friend and it's just amazing

[effectiveduck]

Can't afford this so if anyone wants to take over my order let me know.

Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs

Cheers.

[catweewee]

Can't afford this so if anyone wants to take over my order let me know.

Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs

Cheers.

If the Revo Team is okay with it,

I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass

[Moistgun]

Can't afford this so if anyone wants to take over my order let me know.

Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs

Cheers.

If the Revo Team is okay with it,

I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass

They have already been paid for and cut I believe, I assume they will at least need someone to buy the second plate.

[catweewee]

Can't afford this so if anyone wants to take over my order let me know.

Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs

Cheers.

If the Revo Team is okay with it,

I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass

They have already been paid for and cut I believe, I assume they will at least need someone to buy the second plate.

Spoke to Revo team, said that they have some extras that they will be selling on their taobao store and here in December. I wonder if the SS plate and extra pcb can be placed in the after gb sale instead.

[RevoTeam]

Can't afford this so if anyone wants to take over my order let me know.

Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs

Cheers.

If the Revo Team is okay with it,

I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass

They have already been paid for and cut I believe, I assume they will at least need someone to buy the second plate.

Spoke to Revo team, said that they have some extras that they will be selling on their taobao store and here in December. I wonder if the SS plate and extra pcb can be placed in the after gb sale instead.

I'll let you take it minus the silver plate and extra PCB. I can't say for sure there will be leftovers. I always make one or two more for the GB in case there is any damage. If there are all good,then i will have some leftovers.

[catweewee]

Can't afford this so if anyone wants to take over my order let me know.

Details:
- Black case (top and bottom)
- Pink middle
- SS plate
- Red Alu plate (extra)
- 2 PCBs

Cheers.

If the Revo Team is okay with it,

I'll take it but minus the SS plate and Extra PCB. If they're looking for someone to cover the entire thing, then I'll pass

They have already been paid for and cut I believe, I assume they will at least need someone to buy the second plate.

Spoke to Revo team, said that they have some extras that they will be selling on their taobao store and here in December. I wonder if the SS plate and extra pcb can be placed in the after gb sale instead.

I'll let you take it minus the silver plate and extra PCB. I can't say for sure there will be leftovers. I always make one or two more for the GB in case there is any damage. If there are all good,then i will have some leftovers.

Sounds great, Ive emailed you.


Sent from my iPhone using Tapatalk

[catweewee]

Any updates Revo?