Author Topic: [GB] MW Barista  (Read 9073 times)

0 Members and 1 Guest are viewing this topic.

Offline hongoo

  • Thread Starter
  • Posts: 61
[GB] MW Barista
« on: Sun, 18 September 2022, 10:32:37 »
291442-0
MW Barista

Hello everyone. This is Het from OneKey Studio. The GB for MW Barista is now live. 
"Barista" is inspired by my first job. Although I left that career new, my passion remains unchanged. The population working as baristas is so large that it forms a cultural group. To show its distinct beauty, I made the "coffee mark" and the "latte art" novelties.

"Barista" is my first complete design, there were so many problems at first, but thanks to all of your precious advice and support, it is finally done. It has been six plus months since the IC, we made so many changes and improvements. Thank you again to everyone who has followed along, we made this together.



Specifications
Manufacturer: MW
Profile: Cherry
Material: PBT
Method: dye-sub



GB Info

The starting time varies according to the vendors. The close time will be October 10, 2022. The estimated shipping time is Q2 2023.

Discord: https://discord.gg/XXQf8gPxSR

vendors

CH             MILKYWAY
                 & zFrontier
US             Mechs&co
AUS           Switchkeys
CA             Kanatakeys
EU             Mechjunkies
SG             qwertyqop
Ita/EU        Coffeekeys
UK             MechMods
ROK           Swagkeys


291444-1



Kits

Base
Supporting most 87% and 75% WKLs
291446-2

40s base
291448-3

Novelties
Five basic latte art patterns and tools are often used.
291450-4

Accent
Offering color variations of the Arrow keys and space bars.
291452-5

Number pad
Offering number pad with touch-typing 5 key.
291454-6

Space bars
Different size space bars fit your needs.
291456-7

Cupping milk
Offers 1u keys in different hight for more versatile use.
291458-8

Cupping drip
291460-9

International kit
291462-10

Alpha milk
The highly requested alternative color alpha
291464-11



Desk mat

Coffee Flavors Deskmat
291466-12

Harvest Deskmat
291468-13

Onekey Studio x NPS Deskmat
291470-14



Collaboration

esc・lab

R1 1u
Stainless Steel


291472-15

291474-16

switch

Designer Studio
5 pin MX style linear


291476-17

291478-18

Cable

Winshop

291480-19

291482-20



Render Gallery

Chalice by mugitya
291484-21

G-Series by G-square
291486-22

Spring by Owlab
291488-23

TPS40 by Openkey
291490-24

T3 by Tacworks
291492-25

Nagare80 by OneKey
291494-26



Barista・NAGARE80 special edition

291496-27

We also made a special edition with another product (NAGARE 80) from Onekey Studio.
The f13 rotary switch and the logo light on the top side simulates the coffee machine.


291498-28

291500-29

291502-30

(For the method of purchase and more info, please contact your regional vendor.)


Special thanks to all the people who kindly offered their suggestions, and all the vendors and collaborators.
« Last Edit: Sun, 18 September 2022, 12:15:43 by hongoo »

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 11450
  • Location: WI
Re: [GB] MW Barista
« Reply #1 on: Tue, 20 September 2022, 12:52:16 »
Approved :thumb:

Offline hongoo

  • Thread Starter
  • Posts: 61
Re: [GB] MW Barista
« Reply #2 on: Fri, 23 September 2022, 00:04:46 »
 :thumb: :thumb:

Offline Ranker2

  • Posts: 102
Re: [GB] MW Barista
« Reply #3 on: Tue, 27 September 2022, 11:53:14 »
When will the Esc Labs artisan be made available for purchase?  It wasn't up on the Mechs & Co site when I bought into the GB

Offline phinix

  • Posts: 2294
  • Location: Haggis Land
  • On a diet.. again.. don't ask...
Re: [GB] MW Barista
« Reply #4 on: Fri, 30 September 2022, 03:16:48 »
Do you have final color samples?
9100 | 3070 | 8TB SSD + 2x 1TB SSD | Z390 Aorus Pro ITX | 16GB RAM | SFX 600W | Sentry 2.0 | Ruark Audio MR1 Mark II | LG OLED 48CX
Realforce 87u55 | CM QuickFire Rapid MX Blacks | NCR-80 87g Gateron Oil Kings | Logitech Pro Superlight
SA: Retro Petscii, 7bit Round6 'Symbiosis', Filco, Carbon Bone Cherry: GMK Laser, OG double shot caps, CRP APL GSA: Retro High-light HSA: Hyperfuse

::: Phinix Cube ::: Phinix Nano Tower ::: Phinix Aurora ::: Phinix Chimera ::: Phinix Retro :::

Offline PancakeGoon

  • Posts: 37
  • Location: Worcester, MA
  • *•° tape hiss *•~
    • goonf!sh.beets~
Re: [GB] MW Barista
« Reply #5 on: Fri, 30 September 2022, 16:18:19 »
GORGEOUS color palette for the set & switches! And that 40's kitting is actually pretty good, albeit a bit weirdly-lacking. 🙃

But as far as "quirks" in the 40's kitting goes, what's up with the 1u Enter keys only coming in R4, or the decision to leave out any way for 40's users from getting an ISO Enter - other than also buying the entire Base Kit...?
    And while I understand the difference in mods+bars between 40's + Base, the molds for compatibility support are already there with MW, yet the kit size compared to Base being what it is & only $2-cheaper, PLUS some of the weird compatibility choices, sorta appear like they were added just justify raising the cost (40's kit with number-row & arrow keys, no 3u bars, having an "Accent" Kit that only adds arrows & Base Kit-matched spacebars that leave 40's users with some bars they should've had already, and doubles-or-triples of others - but then including Accent-colored Enter+Esc keys IN the 40's kitting, etc.).

Just seems a very weird choice, and while I never caught the IC thread that apparently left a considerable impact on this re-vamped (and now-finalized) kitting breakdown, it's still lacking compatibility in ways that surely would've been pointed out if given another IC vote, and completely missing and/or unattainable compatibility in others...

At the very least (and someone please clarify or correct me on any of this, if I'm wrong), the entire menu leaves us 40's-backers to make additional unnecessary kit purchases for illogical reasons, imo, and also kills one of the main benefits of even *having* a standalone 40's Base; getting a smaller—yet niche-focused—Base Kit for our smaller keyboards, while also saving money & plastic in the process - which is a shame as this set is gorgeous otherwise!  :(

Offline asura

  • Posts: 265
  • Location: Scotland
  • not a duck
Re: [GB] MW Barista
« Reply #6 on: Tue, 04 October 2022, 08:53:03 »
So tantalisingly close!  But not quite OG coffee & cream... my wait continues.

291996-0

Offline DaaDaa

  • Posts: 292
Re: [GB] MW Barista
« Reply #7 on: Thu, 13 October 2022, 21:19:38 »
Please publish the numbers? How many will be produced?
piggy60 red upgraded PVD w/ GMK umka zaku | tiramisuit w/ GMK noire JWK silk emerald | mr.suit black/chrome glossy chamfers w/ GMK minimal cow POM stem | jelly epoch w/ SA oblivion zaku | mode80 deco w/ gmk boneyard alpaca | mode 80 imperial with ePBT origami alpaca| MODE80 viridian /w CRP boba LT | RAMA thermal kuro w/ GMK muted 2 pewter | BBox60 C64 wih marshmellows and c64 keycaps | MODE Sonnet green /w MW voynich gateron ink box pink

Offline CONIN

  • Posts: 79
  • Location: México
    • Choripán Squad
Re: [GB] MW Barista
« Reply #8 on: Tue, 15 November 2022, 20:16:34 »
As usual, I am late to the party, would have really loved to get one of the deskpads, but I just found out about this set a few minutes ago, and the GB closed a month ago. Hope to get it if extras are released. Cheers!

Offline Wise Donkey

  • Posts: 22
Re: [GB] MW Barista
« Reply #9 on: Tue, 30 May 2023, 18:11:27 »
On the Milkyway Discord, Barista started shipping to vendors April 10th. I haven't seen any updates for Mechs&Co. Would you know when we should see Barista start fulfillment?