Author Topic: [GB] Noxary X60 R (Complete)  (Read 90458 times)

0 Members and 2 Guests are viewing this topic.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
[GB] Noxary X60 R (Complete)
« on: Wed, 17 January 2018, 00:47:24 »








Group Buy Information:
  • 1/20/2018
  • 2PM - 8PM EST
  • 6 Hour Raffle
  • 20 Slots Available
Information:
  • 8 Degrees Angle
  • Top Mounted Plate with Switch Opening
  • Custom Red USB-C QMK PCB
  • Choice of 3 Different Top Pieces
  • Total of 20
Specification:
  • Brass Weight with Engraving
  • Aluminium, Brass or Stainless Steel Plate
  • Limited to 20
Price (excluding fees + shipping):
  • Case (Top/Weight/Bottom) - $340
  • Plate - $30
  • PCB - $30
Colors:
  • Black
  • Silver
  • Dark Gray (8401 C)
  • Pink (1895 U)
  • Blue Gray (8181 C)
  • Ultra Violet (18-3838 TXC)
Shipping:

I'll be shipping with DHL Express again, with most packages taking 1-3 days for a good price. Your local taxes and fees apply. Shipping will be invoiced for when the cases arrive. Estimates for shipping are as follows: United States - $40; United Kingdom - $20; Europe - $30-35; Asia - $50-60.

Deadline & Lead Times:

Will be allowing 48 hours for payment before spot is reraffled. Once the order has been submitted to the factory, it will take about 8-10 weeks to arrive.
« Last Edit: Thu, 16 May 2019, 10:39:38 by xondat »

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R
« Reply #1 on: Wed, 17 January 2018, 00:47:37 »
vadurr

ctzn_voyager

exanile_tabasco



oatmicro

___q

megaforce93



Hawk

frostbyte



poolside

nug

alveeno

Captainbuttmonkey



kmba

Rafa_m



DreLLin

dyrdevil

hpe1000



kekstee



lunr



regionfree

« Last Edit: Fri, 29 March 2019, 22:46:04 by xondat »

Offline ghostjuggernaut

  • * Curator
  • Posts: 3575
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #2 on: Wed, 17 January 2018, 17:42:31 »
Approval bump  :thumb:

As always, caveat emptor.

Offline Captainbuttmonkey

  • Posts: 319
  • Location: UK
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #3 on: Wed, 17 January 2018, 18:08:07 »
Too many great 60/65%'s around at the moment. I'm going to have to make some tough choices haha, looks great anyway dude.

Offline swimmingbird

  • * Elevated Elder
  • Posts: 2119
  • Location: Sydney, Australia
  • keyset hoarder
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #4 on: Wed, 17 January 2018, 18:22:01 »
Won't be entering as I already have an X60, but if you are thinking about entering I would highly recommend this board

The nicest 60% I own by a stretch

Offline exanile_tabasco

  • Posts: 85
  • Location: Canada
  • settling down
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #5 on: Wed, 17 January 2018, 18:39:41 »
hype hype hype get in on it if you want a quality 60!

Offline pr0ximity

  • Posts: 2705
  • Location: Maine
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #6 on: Wed, 17 January 2018, 18:41:23 »
Sick board, jealous of those who get in. GL all.
| Flickr | KMAC 1.2 | Koala | GSKT-00-Z | GSKT-00-AEK | GON NerD60 | Jane V2 CE | Whale | J80S | Ibis | Pro2 | Pro1 | 356mini | 356CL DGE | G80-5000 HAMDE | IBM 1390120 | IBM F AT | IBM F122 | IBM 3101 | Zenith Z-150

Offline crtexcnndrm99

  • Posts: 341
  • Location: Brisbane, Australia
  • *profile image used without permission* ;)
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #7 on: Wed, 17 January 2018, 19:50:58 »
Awesome job xondat. Congrats to the lucky people who will be getting this one  :thumb:
You're a smooth smoothie, you know? ~ Gaear Grimsrud

Offline DJSwayde

  • Posts: 222
  • Location: Illinois
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #8 on: Wed, 17 January 2018, 19:59:55 »
Amazing. Really hope I get it.
Mains: Bakers 6T (silver)   |   Bakers CL64 (silver)   |   CannonKeys Bakeneko60 (black)   |   Carolina Mech Palmetto (black)   |   LZ CLS h (silver)   |   Monokei Kei R1 (standard red, HHKB)   |   PFU Limited HHKB Pro 1 (PD-KB300BN)   |   PFU Limited HHKB Pro 2 (PD-KB400B)   |   PFU Limited HHKB Pro 2 Type-S (PD-KB400WS)   |   SINGAKBD x TGR Unikorn R1 (black)   |   Weaston GSKT-00 R1 (gray [re-anodized silver, HHKB])   |   Weaston GSKT-00-Z (silver, AEK HHKB)

Alps: Apple Extended Keyboard II (M3501, Taiwanese)   |   Apple Standard Keyboard (M0116, US)   |   Dell AT101 (GYI3PVAT101, US)    |   IBM Multistation 5556-001 (Chinese)   |   IBM P70 (ANSI-US, thick)   |   MET Micro Officer 6000 (R315-00)   |   SGI AT-101 "Beige"   |   Zenith Data Systems TurbosPORT 386
Cherry: G80-3000LPCXY-2 #1   |   G80-3000LPCXY-2 #2   |   G80-3485LWNUS #1 (Das Keyboard II)   |   G80-3485LWNUS #2 (Das Keyboard II)   |   G81-1281SAW (Zenith Data Systems)   |   G81-3000SAT   |   G81-3090SAQ (Schneider)   |   G81-3100SEBUS
Topre: PFU Limited HHKB Blank (charcoal [PD-KB300BN])   |   PFU Limited HHKB Printed (charcoal [PD-KB400B])   |   PFU Limited HHKB Printed (gray [PD-KB400WS])   |   Realforce 91UDK-G (NG02B0)   |   Realforce 103UB (SE42B0)   |   Realforce Taiwanese kit (dark gray)   |   Sony BKE-9400A   |   Sony MKS-8050


Collection

Offline xosk

  • Posts: 21
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #9 on: Wed, 17 January 2018, 20:02:20 »
Is this FCFS?

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1173
  • Location: Indiana, USA
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #10 on: Wed, 17 January 2018, 20:07:13 »
Is this FCFS?

Group Buy Information:
1/20/2018
2PM - 8PM EST
6 Hour Raffle
20 Slots Available
keyboards.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #11 on: Wed, 17 January 2018, 21:25:07 »
Too many great 60/65%'s around at the moment. I'm going to have to make some tough choices haha, looks great anyway dude.

Won't be entering as I already have an X60, but if you are thinking about entering I would highly recommend this board

The nicest 60% I own by a stretch

hype hype hype get in on it if you want a quality 60!

Sick board, jealous of those who get in. GL all.

Amazing. Really hope I get it.

Awesome job xondat. Congrats to the lucky people who will be getting this one  :thumb:

Thanks for the support!

Is this FCFS?

No, there will be a Google Form open from 2PM to 8PM EST on Saturday. Simply fill the form in, and when it's closed, find out if you get a slot.

Offline ricrackem

  • Posts: 50
  • Location: US-CT
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #12 on: Wed, 17 January 2018, 21:29:55 »
Nice, stoked for a chance. Will all layouts be available (Classic, wkl, hhkb)?

Sent from my SM-G950U1 using Tapatalk


Online dyrdevil

  • Posts: 257
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #13 on: Wed, 17 January 2018, 21:32:45 »
Really Hoping I get a spot! Happy to see that price too.  Thanks!

Offline The_judge_168

  • Posts: 261
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #14 on: Wed, 17 January 2018, 22:19:29 »
Calendar set, excited for a chance at one

Offline Lotsati

  • Posts: 42
  • Location: San Jose, CA
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #15 on: Thu, 18 January 2018, 01:22:32 »
$440 shipped to the US for everything...  :-X This will be one of those cases where I'll want to win and lose the raffle at the same time lol

Offline Vadurr

  • Posts: 737
  • Location: CA
  • Valar Morghulis
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #16 on: Thu, 18 January 2018, 01:44:06 »
I'm stoked ^__^

Offline crtexcnndrm99

  • Posts: 341
  • Location: Brisbane, Australia
  • *profile image used without permission* ;)
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #17 on: Thu, 18 January 2018, 01:57:53 »
$440 shipped to the US for everything...  :-X This will be one of those cases where I'll want to win and lose the raffle at the same time lol

This. Exactly where I’m at too right now ;)


Sent from my iPhone using Tapatalk
You're a smooth smoothie, you know? ~ Gaear Grimsrud

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #18 on: Thu, 18 January 2018, 02:01:25 »
$440 shipped to the US for everything...  :-X This will be one of those cases where I'll want to win and lose the raffle at the same time lol

This. Exactly where I’m at too right now ;)


Sent from my iPhone using Tapatalk

So say we all!

Offline hhkbp2

  • Posts: 407
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #19 on: Thu, 18 January 2018, 03:34:28 »
All in.

Offline oatmicro

  • Posts: 352
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #20 on: Thu, 18 January 2018, 04:24:24 »
I'm here

waiting

to join

Offline kekstee

  • Posts: 314
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #21 on: Thu, 18 January 2018, 05:44:13 »
Haha, damn. Just as I'm debating in which of the upcoming 60s to put my Nixdorfs this thing comes along. Well, crossing my fingers.

Offline bminhz

  • Posts: 114
  • Location: San Pellegrino
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #22 on: Thu, 18 January 2018, 08:26:11 »
Good luck all participants....I need one as well!

Online dyrdevil

  • Posts: 257
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #23 on: Thu, 18 January 2018, 11:13:51 »
Really Hoping I get a spot! Happy to see that price too.  Thanks!

$440 shipped to the US for everything...  :-X This will be one of those cases where I'll want to win and lose the raffle at the same time lol

Yeah, on first look I thought the plate was included for $340.. oh well. Still hoping I get in.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #24 on: Thu, 18 January 2018, 11:25:26 »
Yeah, sorry about the price. Low quantity means it'll be higher. I don't plan to do these small runs as a usual.

I split the case/plate price as standard as people do get multiple.

Offline MaNiFeX

  • Posts: 691
  • Location: Bellmawr, NJ
  • Wu Tang Killa Keebs
    • MaNiFeX.net
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #25 on: Thu, 18 January 2018, 12:13:00 »
No, there will be a Google Form open from 2PM to 8PM EST on Saturday. Simply fill the form in, and when it's closed, find out if you get a slot.

This is UK time, correct?

Thank You!

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #26 on: Thu, 18 January 2018, 12:16:16 »
No, there will be a Google Form open from 2PM to 8PM EST on Saturday. Simply fill the form in, and when it's closed, find out if you get a slot.

This is UK time, correct?

Thank You!

EST is Eastern Standard Time, so East Coast USA. 7PM to 1AM UTC/GMT. :p

Offline kekstee

  • Posts: 314
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #27 on: Thu, 18 January 2018, 13:10:53 »
Are you planning to run this design in a more accessible gb in the future btw?

Offline Captainbuttmonkey

  • Posts: 319
  • Location: UK
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #28 on: Thu, 18 January 2018, 13:27:54 »
Are you planning to run this design in a more accessible gb in the future btw?

From IC: 'This is not X60 V2. That'll be ran in the future, so don't worry if you miss this one.'

And yes I believe he said V2 will be a larger run with some slight aesthetic differences if I'm not mistaken? I think it was around 50 but I could very well be pulling that out my ass.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #29 on: Thu, 18 January 2018, 13:35:00 »
Are you planning to run this design in a more accessible gb in the future btw?

Not this exact design.

V2 will feature:
  • Slimmer bezels (6/4mm) vs this (8/4mm)
  • Outer edges rounded vs this chamfer
  • More plate/color options
  • Probably 100 units vs 20
  • Different engraving design (maybe, I really like how this one turned out)

Offline MaNiFeX

  • Posts: 691
  • Location: Bellmawr, NJ
  • Wu Tang Killa Keebs
    • MaNiFeX.net
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #30 on: Thu, 18 January 2018, 15:30:42 »
No, there will be a Google Form open from 2PM to 8PM EST on Saturday. Simply fill the form in, and when it's closed, find out if you get a slot.

This is UK time, correct?

Thank You!

EST is Eastern Standard Time, so East Coast USA. 7PM to 1AM UTC/GMT. :p

Reading is good.  Derp!  Thank you!   :p

Offline keebweeb

  • Posts: 27
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #31 on: Thu, 18 January 2018, 19:16:43 »
Looks good!

Will the PCB being offered be the USB-C QMK-compatible one mentioned in the IC and otherwise be similar to the 268 PCB?

Also, will the plate support a universal layout or will it be the HHKB style one shown in the renders?

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1173
  • Location: Indiana, USA
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #32 on: Thu, 18 January 2018, 19:48:33 »
probably hhkb only layout.. best layout anyway.  adapt or die.
keyboards.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #33 on: Thu, 18 January 2018, 20:16:24 »
Looks good!

Will the PCB being offered be the USB-C QMK-compatible one mentioned in the IC and otherwise be similar to the 268 PCB?

Also, will the plate support a universal layout or will it be the HHKB style one shown in the renders?

PCB will basically be the same, yes.

Plate will support this:


Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #34 on: Thu, 18 January 2018, 23:00:24 »
Looks good!

Will the PCB being offered be the USB-C QMK-compatible one mentioned in the IC and otherwise be similar to the 268 PCB?

Also, will the plate support a universal layout or will it be the HHKB style one shown in the renders?

PCB will basically be the same, yes.

Plate will support this:

Show Image


Wait, it has a glorious fixed bottom row plate? For some reason I want it more now.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #35 on: Thu, 18 January 2018, 23:12:08 »
Looks good!

Will the PCB being offered be the USB-C QMK-compatible one mentioned in the IC and otherwise be similar to the 268 PCB?

Also, will the plate support a universal layout or will it be the HHKB style one shown in the renders?

PCB will basically be the same, yes.

Plate will support this:

Show Image


Wait, it has a glorious fixed bottom row plate? For some reason I want it more now.

Between having extra holes in the plate and my lack of care for 1.25u bottom row, this is the result :))

Seriously considering having that as the only bottom row on the PCB too. Clean PCBs are the best. Would love to have a single layout PCB + plate combo  :'(

Offline finalarcadia

  • Posts: 408
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #36 on: Thu, 18 January 2018, 23:17:50 »
Quote

Between having extra holes in the plate and my lack of care for 1.25u bottom row, this is the result :))

Seriously considering having that as the only bottom row on the PCB too. Clean PCBs are the best. Would love to have a single layout PCB + plate combo  :'(

Do it :p Should offer HHKB layout only plate/pcb, being the most popular and best layout and all

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #37 on: Fri, 19 January 2018, 00:12:38 »
Quote

Between having extra holes in the plate and my lack of care for 1.25u bottom row, this is the result :))

Seriously considering having that as the only bottom row on the PCB too. Clean PCBs are the best. Would love to have a single layout PCB + plate combo  :'(

Do it :p Should offer HHKB layout only plate/pcb, being the most popular and best layout and all

Meh, I prefer a normal backspace for aesthetic reasons, but the rest of it I totally use an hhkb layout.

Offline WhateverZYX

  • Posts: 23
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #38 on: Fri, 19 January 2018, 03:49:42 »
I'd pay additionally for a plate that only supports HHKB-layout. Avoiding those see-through Swiss cheese plates would definitely be worth it.

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #39 on: Fri, 19 January 2018, 03:51:15 »
I'd pay additionally for a plate that only supports HHKB-layout. Avoiding those see-through Swiss cheese plates would definitely be worth it.

That I will agree with. Was one of the selling points on the LZ s x h. Having plates cut to my specific layout is naic

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #40 on: Fri, 19 January 2018, 05:10:06 »
I would but it’d raise the prize, and I’m wanting to keep this simple.

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1173
  • Location: Indiana, USA
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #41 on: Fri, 19 January 2018, 05:55:49 »
Can you poll the people that end up winning and if no one wants iso compatibility, get rid of that God awful huge hole in the plate.
keyboards.

Offline fatpolomanjr

  • Posts: 459
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #42 on: Fri, 19 January 2018, 06:02:42 »
HHKB layout is seriously good.
Some guys keep on saying they believe in Jesus, and keep doing a lot of shameful things.
Current GH Classified Post (LF Arcade Floor, Garbield and CYM Otter and Keyng)

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #43 on: Fri, 19 January 2018, 11:02:51 »
Can you poll the people that end up winning and if no one wants iso compatibility, get rid of that God awful huge hole in the plate.

Yeah I'll do it for all layout options left. I suspect that split rshift/backspace will stay and lshift will go.

Offline RealLaugh

  • Posts: 155
  • Location: Germany
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #44 on: Fri, 19 January 2018, 13:10:15 »
Can you poll the people that end up winning and if no one wants iso compatibility, get rid of that God awful huge hole in the plate.

Yeah I'll do it for all layout options left. I suspect that split rshift/backspace will stay and lshift will go.

Is that confirmed that ISO is out of the question or will it be an option for the plate?

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1173
  • Location: Indiana, USA
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #45 on: Fri, 19 January 2018, 13:16:54 »
I think it will remain if winners want support. If none of the 20 people want it, sayonara baby.
keyboards.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #46 on: Fri, 19 January 2018, 14:26:59 »
I think it will remain if winners want support. If none of the 20 people want it, sayonara baby.

Spot on.

Offline RealLaugh

  • Posts: 155
  • Location: Germany
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #47 on: Fri, 19 January 2018, 14:52:58 »
I think it will remain if winners want support. If none of the 20 people want it, sayonara baby.

I think it will remain if winners want support. If none of the 20 people want it, sayonara baby.

Spot on.

ok makes sense in this case to do what the people who won the raffle want, thanks for clarifying :)

Online dyrdevil

  • Posts: 257
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #48 on: Fri, 19 January 2018, 22:13:26 »
xondat,

2 questions if you have time :

1) will the brass plate be mirror finish only?  I really like the look of the brass plate from the previous run.

2) do you have any pics you could post of the dark grey and silver finishes next to each other? Or maybe of the silver next to a classic beige/9009 colorway? 

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 5366
  • Location: United Kingdom
Re: [GB] Noxary X60 R (Opens 1/20)
« Reply #49 on: Fri, 19 January 2018, 22:22:05 »
xondat,

2 questions if you have time :

1) will the brass plate be mirror finish only?  I really like the look of the brass plate from the previous run.

2) do you have any pics you could post of the dark grey and silver finishes next to each other? Or maybe of the silver next to a classic beige/9009 colorway?

  • Which brass plates are you referring to? I've only done brass for 268 and they're mirror (the same as this).
  • Dark gray with 9009 below. I don't have a silver case to compare, but there are many on Google etc.