To add onto that: maybe just no exposed screws for the weight.
Also down for 75% designs. Angled. What do you mean by bar?
+1 for 80 WKL with bar
Actually I'd like to see it looks like V1
84key. WKL.
STS Bottom.
Bar.
Angled.
:D
Exactly+1 for 80 WKL with bar
Actually I'd like to see it looks like V1
+1 on a re-run of V1
80% and bar or bust ;)
+1 for 80 WKL with bar
Actually I'd like to see it looks like V1
+1 on a re-run of V1
80% and bar or bust ;)
84key. WKL.
STS Bottom.
Bar.
Angled.
:D
I had to choose LZ-GH or a college textbook from the original GB. I chose the textbook. I will not make the same mistake again.
I'd definitely have to get a 65%. 75% would be interesting. Not interested at all in anything bigger.+1 on this
+1 on this as well.I'd definitely have to get a 65%. 75% would be interesting. Not interested at all in anything bigger.+1 on this
84key. WKL.
STS Bottom.
Bar.
Angled.
TKL or WKL
STS Bottom
TKL or WKL
STS Bottom
Wkl 122 key style sounds awesome :thumb:
I think people are getting confused with the terminology used. “Bar” and “Angled” are two different options to accomplish the same goal, that being to raise the back of the keyboard to a certain angle from being parallel to the desk top.JD : )
The original LZ-GH had a bar foot.
An angled case bottom would serve the same purpose, as we see in other keyboard case designs.
If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.
If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate.
Split is life, so much more comfortable to type onOr include the split, I dig that as well.. either way, love a 75% with the 10 on the left
Sent from my Pixel 2 XL using Tapatalk
I think people are getting confused with the terminology used. “Bar” and “Angled” are two different options to accomplish the same goal, that being to raise the back of the keyboard to a certain angle from being parallel to the desk top.
The original LZ-GH had a bar foot.
An angled case bottom would serve the same purpose, as we see in other keyboard case designs.
If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.
You mean “red”
Will it come in Topre?
I never mapped the 10 on the left. Just a built in artisan holder for meSplit is life, so much more comfortable to type onOr include the split, I dig that as well.. either way, love a 75% with the 10 on the left
Sent from my Pixel 2 XL using Tapatalk
I am assuming if the bar option was offered, it would still be possible to take the bar off and lay the board flat without any wobble?I would hope this would be the case.
Probably a long shot but a 40% HHKB-style case?
Matching GH numpad?
LZ GH Series?
TKL, 75, 65......other..
Top / Brass(Gold coating) / Brass bar(Gold Coating)
(Attachment Link)
:p :p
LZ GH Series?
TKL, 75, 65......other..
Top / Brass(Gold coating) / Brass bar(Gold Coating)
(Attachment Link)
:p :p
LZ GH Series?
TKL, 75, 65......other..
Top / Brass(Gold coating) / Brass bar(Gold Coating)
(Attachment Link)
:p :p
Matching GH numpad?
80%, bar weight, polished sts bottom :) Please offer cyan as a color option, the same cyan as the lz-s
LZ GH Series?
TKL, 75, 65......other..
Top / Bras upper plate (Gold coating) / Brass bar(Gold Coating)
(Attachment Link)
:p :p
Waiting for an LZ-SE re-run :P
Waiting for an LZ-SE re-run :P
Waiting for LZ-RV rerun ;)
Waiting for an LZ-SE re-run :P
Waiting for LZ-RV rerun ;)
RV so good. In general we need more left hand numpads.
LZ GH Series?
TKL, 75, 65......other..
Top / Bras upper plate (Gold coating) / Brass bar(Gold Coating)
(Attachment Link)
:p :p
LZ GH Series?
TKL, 75, 65......other..
Top / Bras upper plate (Gold coating) / Brass bar(Gold Coating)
(Attachment Link)
:p :p
This seems to be well received. Do people like it for the typing feel or nostalgia? Just curious.
Very happy to see more work from LZ!
Have you actually typed on one for a longer time? Because to be honest when I look at the boards in your signature doesn’t seem like you did, but oddly enough you are very well informed about every single keyboard, sometimes you know even better than the GB runner or the designer of the keyboard. What is your secret ? I would like too to know everything and never have to spend money to actually get one.This seems to be well received. Do people like it for the typing feel or nostalgia? Just curious.
Very happy to see more work from LZ!
seems like nostalgia
the bar LZs (LZ-F, LZ-S, LZ-GH) are notoriously... not so great to type on compared to angled ones, the sound especially is kinda weird
i like the look, but i'd really like to see a thicker bottom with a similar design
Have you actually typed on one for a longer time? Because to be honest when I look at the boards in your signature doesn’t seem like you did, but oddly enough you are very well informed about every single keyboard, sometimes you know even better than the GB runner or the designer of the keyboard. What is your secret ? I would like too to know everything and never have to spend money to actually get one.This seems to be well received. Do people like it for the typing feel or nostalgia? Just curious.
Very happy to see more work from LZ!
seems like nostalgia
the bar LZs (LZ-F, LZ-S, LZ-GH) are notoriously... not so great to type on compared to angled ones, the sound especially is kinda weird
i like the look, but i'd really like to see a thicker bottom with a similar design
Wait what? That's nonsense...
Have you actually typed on one for a longer time? Because to be honest when I look at the boards in your signature doesn’t seem like you did, but oddly enough you are very well informed about every single keyboard, sometimes you know even better than the GB runner or the designer of the keyboard. What is your secret ? I would like too to know everything and never have to spend money to actually get one.
I will make video for comparing.
Wait a few hours.
I like the bar. Is it for aesthetic or also for feeling?Show Image(https://i.imgur.com/e9TThvP.png)
My favourite is this, LZ RE, where you get both angle + bar :thumb: :thumb:
Also love the bottom of it.
I like the bar. Is it for aesthetic or also for feeling?Show Image(https://i.imgur.com/e9TThvP.png)
My favourite is this, LZ RE, where you get both angle + bar :thumb: :thumb:
Also love the bottom of it.
I'd also insta join for LZ-RE V2
I like the bar. Is it for aesthetic or also for feeling?Show Image(https://i.imgur.com/e9TThvP.png)
My favourite is this, LZ RE, where you get both angle + bar :thumb: :thumb:
Also love the bottom of it.
i'd buy LZ RE V2
I'd also insta join for LZ-RE V2
+1, I'd also be interested.
I also usually line the space under the PCB with a dampening mat of some sort, if space allows, which I've done with LZ-GH. To each their own of course, but in my opinion this kit has an excellent unique design, and I love its weight distribution.
(you know the story ;) )
(you know the story ;) )
For those who don't, it's a great read! Keyboard Repair project: LZ-GH (https://geekhack.org/index.php?topic=49632.0)
(you know the story ;) )
For those who don't, it's a great read! Keyboard Repair project: LZ-GH (https://geekhack.org/index.php?topic=49632.0)
(you know the story ;) )
For those who don't, it's a great read! Keyboard Repair project: LZ-GH (https://geekhack.org/index.php?topic=49632.0)
I like the bar. Is it for aesthetic or also for feeling?Hey, this is LZ GH V2 :pShow Image(https://i.imgur.com/e9TThvP.png)
My favourite is this, LZ RE, where you get both angle + bar :thumb: :thumb:
Also love the bottom of it.
I like the bar. Is it for aesthetic or also for feeling?Hey, this IC, LZ GH V2 :pShow Image(https://i.imgur.com/e9TThvP.png)
My favourite is this, LZ RE, where you get both angle + bar :thumb: :thumb:
Also love the bottom of it.
RE , I hope to have a conversation next time. hahaaaaa
If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.
+1If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.
I'm with you 100%.
If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.
If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.
I'm with you 100%.
If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.
+1
LZ, after CLS s&h, is this the keyboard you planning to run?
I would love if an Alps plate/PCB option were to be available, we haven't seen a high end option for Alps in a while!
To distinguish from old version, wouldn't it just be easier to engrave v2?
To distinguish from old version, wouldn't it just be easier to engrave v2?
^ This all day!
TKL+WKL+Bar. Cyan anodizing option w/polished bottom! Go old school with it!
To distinguish from old version, wouldn't it just be easier to engrave v2?
^ This all day!
TKL+WKL+Bar. Cyan anodizing option w/polished bottom! Go old school with it!
+1 for Cyan. And that polished bottom is super nice. Pic from Turkishrambo:Show Image(http://i.imgur.com/Lau543e.jpg)
To distinguish from old version, wouldn't it just be easier to engrave v2?
^ This all day!
TKL+WKL+Bar. Cyan anodizing option w/polished bottom! Go old school with it!
+1 for Cyan. And that polished bottom is super nice. Pic from Turkishrambo:Show Image(http://i.imgur.com/Lau543e.jpg)
Does it have feet on the front edge? I don’t see any on there. Adding a recess for feet pads could be a nice simple change for v2.
If the main design is the same I don't see why lz couldn't just use the old alps plate files, and on the same topic, we can use the same old plates.I would love if an Alps plate/PCB option were to be available, we haven't seen a high end option for Alps in a while!
I don't see why not. LZ made an Alps plate/PCB for the original LZ-GH after the GB was over (I have one), so surely they would bring that back as an option.
Have you not seen this?If the main design is the same I don't see why lz couldn't just use the old alps plate files, and on the same topic, we can use the same old plates.I would love if an Alps plate/PCB option were to be available, we haven't seen a high end option for Alps in a while!
I don't see why not. LZ made an Alps plate/PCB for the original LZ-GH after the GB was over (I have one), so surely they would bring that back as an option.
What, no one misses the "salmon red"? :))
What, no one misses the "salmon red"? :))
I actually really like that red. :-[
What, no one misses the "salmon red"? :))
I actually really like that red. :-[
I've never had an issue with it either, personally, and mine started out that color. But it was rather infamous for the pink-salmonness, if you would.
What, no one misses the "salmon red"? :))
What, no one misses the "salmon red"? :))
it was great on the RE, GH not so much imo
What, no one misses the "salmon red"? :))
it was great on the RE, GH not so much imo
Agreed.
+1 to silver and blue-grey. I think silver would look good with the bar.
Maybe nice to see a lighter blue grey option, like this kind of thing:Show Image(https://sep.yimg.com/ay/knifeart/benchmade-477-1-assisted-blue-anodized-with-s30v-steel-35.png)
(not my knife, just the first image result with the colour I was thinking of).
Would look real tasty with the brass bar.
Maybe nice to see a lighter blue grey option, like this kind of thing:Show Image(https://sep.yimg.com/ay/knifeart/benchmade-477-1-assisted-blue-anodized-with-s30v-steel-35.png)
(not my knife, just the first image result with the colour I was thinking of).
Would look real tasty with the brass bar.
That would look pretty badass :thumb:
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;DYessss! :thumb:
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
Just noticed that beyond the differently shaped bar foot, the left/right sides of the case are also significantly thicker compared to the original.
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
GH WINKEYLESS ;D
(Attachment Link)
(Attachment Link)
Maybe nice to see a lighter blue grey option, like this kind of thing:Show Image(https://sep.yimg.com/ay/knifeart/benchmade-477-1-assisted-blue-anodized-with-s30v-steel-35.png)
(not my knife, just the first image result with the colour I was thinking of).
Would look real tasty with the brass bar.
Maybe nice to see a lighter blue grey option, like this kind of thing:Show Image(https://sep.yimg.com/ay/knifeart/benchmade-477-1-assisted-blue-anodized-with-s30v-steel-35.png)
(not my knife, just the first image result with the colour I was thinking of).
Would look real tasty with the brass bar.
That would look good, but the closer we get to a GB announcement the more I'm hoping to see something like:Show Image(https://i.imgur.com/cvvCDoH.png)
(Not my knife, either.)
Hello everyone,
I am going to proceed with a pre-order.
Limited quantity, 4 colors, 5 switch plates
CASE TYPE IC (https://goo.gl/forms/4qAreftonGncEZCP2)
Just filled out the IC. Any chance for colored switch plates? I’m really wanting a blacked out LZ.only Aluminum switch plate can be selected color.
Just filled out the IC. Any chance for colored switch plates? I’m really wanting a blacked out LZ.only Aluminum switch plate can be selected color.
Silver, Red and Black. 3 colors
When will the GB commence?
LZ, can we see a few more pictures, please?
When will the GB commence?
When will the GB commence?
+1 Will it be after the CLSsh GB is finished up?
Torn between a 84 or 86 key layout.
Most of my favorite pictures of the original had 86 key layout.
Hello everyone, :)
LZ GH V2
SPEC.
TOP CASE : ALU
BOT PLATE n FOOT : BRASS
SWITCH PLATE : ALU, PC, CARBON, BRASS
ABOUT WEIGHT : 2.8kg (Un-assemble)
I am going to proceed with a pre-order.
Limited quantity, 4 colors, 4 switch plates
Your choice?
CHECK (https://goo.gl/forms/4qAreftonGncEZCP2)
I filled out the IC. Is colors on case and price decided yet?
BOT PLATE n FOOT : BRASS
When will the GB commence?
+1 Will it be after the CLSsh GB is finished up?
Torn between a 84 or 86 key layout.
Most of my favorite pictures of the original had 86 key layout.
Will it be after the CLSsh GB is finished up.
and 86 is same 87 case.
It is just for checking the quantity according to the layout.
case 3 or 4colors
Will it be after the CLSm or CLSsh GB is finished up.
It is just for checking the quantity according to the layout.
case 3 or 4colors
Will it be after the CLSm or CLSsh GB is finished up.
It is just for checking the quantity according to the layout.
case 3 or 4colors
Will it be after the CLSm or CLSsh GB is finished up.
Glad it will be after the CLSsh GB is finished.
Really hope the Grey color you showed a few pages back will be one of the color options.
Will brass be the only option for the bottom, or will Stainless steel also be an option?
It is just for checking the quantity according to the layout.
case 3 or 4colors
Will it be after the CLSm or CLSsh GB is finished up.
Glad it will be after the CLSsh GB is finished.
Really hope the Grey color you showed a few pages back will be one of the color options.
Will brass be the only option for the bottom, or will Stainless steel also be an option?
I am worried about the color.
Bottom is only brass!
No ss option? Im out. I ****ing hate brass.
you love tarnishing?No ss option? Im out. I ****ing hate brass.
Yay, more chances for me. I <3 Brass
you love tarnishing?No ss option? Im out. I ****ing hate brass.
Yay, more chances for me. I <3 Brass
Now that's a sad news, mirror finish SS is what so cool about round 1.
weights were never sealed/mirror finished on previous group buysyou love tarnishing?No ss option? Im out. I ****ing hate brass.
Yay, more chances for me. I <3 Brass
First, he never said it wasn't sealed. Second, patina looks good. Third, tarnished brass is like the easiest thing in the world to clean.Now that's a sad news, mirror finish SS is what so cool about round 1.
I mean, you can also mirror finish brass. Heck, with pvd you can even finish brass silver. (Not saying he's doing pvd). Mirror and material are unrelated things tho lol.
weights were never sealed/mirror finished on previous group buysyou love tarnishing?No ss option? Im out. I ****ing hate brass.
Yay, more chances for me. I <3 Brass
First, he never said it wasn't sealed. Second, patina looks good. Third, tarnished brass is like the easiest thing in the world to clean.Now that's a sad news, mirror finish SS is what so cool about round 1.
I mean, you can also mirror finish brass. Heck, with pvd you can even finish brass silver. (Not saying he's doing pvd). Mirror and material are unrelated things tho lol.
weights were never sealed/mirror finished on previous group buysyou love tarnishing?No ss option? Im out. I ****ing hate brass.
Yay, more chances for me. I <3 Brass
First, he never said it wasn't sealed. Second, patina looks good. Third, tarnished brass is like the easiest thing in the world to clean.Now that's a sad news, mirror finish SS is what so cool about round 1.
I mean, you can also mirror finish brass. Heck, with pvd you can even finish brass silver. (Not saying he's doing pvd). Mirror and material are unrelated things tho lol.
Pretty sure he's referring to this:Show Image(http://i.imgur.com/Lau543e.jpg)
Regardless, that doesnt make what I said any less true. The point is brass can be shiny or matte and it can be treated to not tarnish. Saying no go on a GB because its made of a "metal you don't like" makes no sense.
weights were never sealed/mirror finished on previous group buysyou love tarnishing?No ss option? Im out. I ****ing hate brass.
Yay, more chances for me. I <3 Brass
First, he never said it wasn't sealed. Second, patina looks good. Third, tarnished brass is like the easiest thing in the world to clean.Now that's a sad news, mirror finish SS is what so cool about round 1.
I mean, you can also mirror finish brass. Heck, with pvd you can even finish brass silver. (Not saying he's doing pvd). Mirror and material are unrelated things tho lol.
Pretty sure he's referring to this:Show Image(http://i.imgur.com/Lau543e.jpg)
Regardless, that doesnt make what I said any less true. The point is brass can be shiny or matte and it can be treated to not tarnish. Saying no go on a GB because its made of a "metal you don't like" makes no sense.
I believe saying no to a GB because it doesn't suit your preference is a pretty valid reason and make perfect sense
just sticker bomb the bottom if dont like brass.
ez pz fix.
buy a can of brass lacquer for $12 and then never have this problem again
just sticker bomb the bottom if dont like brass.
ez pz fix.
Sacrilege...
buy a can of brass lacquer for $12 and then never have this problem again
How resistant is it to chipping, bubbles, etc?
I haven't had much success with clear coat in the past.
That would be a cheap solution - although I'd prefer to have someone do it in a clean booth.
buy a can of brass lacquer for $12 and then never have this problem again
How resistant is it to chipping, bubbles, etc?
I haven't had much success with clear coat in the past.
That would be a cheap solution - although I'd prefer to have someone do it in a clean booth.
i did it in a field on a windy day and it turned out fine
buy a can of brass lacquer for $12 and then never have this problem again
How resistant is it to chipping, bubbles, etc?
I haven't had much success with clear coat in the past.
That would be a cheap solution - although I'd prefer to have someone do it in a clean booth.
i did it in a field on a windy day and it turned out fine
Tons of dust in the air where I stay is all - makes it hard to get a clean finish outside.
Durability of the coating is my primary concern - mainly chipping.
Got any photos of the finish? How much wear and tear has it been through?
I'm considering trying on on the weight from my ST.
LZ,
What about the angle?
I had never seen this diagram before on how the LZ-GH v1 angle could be changed. That is brilliant.Show Image(http://i.imgur.com/NozQ5Hu.png)
So when I look at this image, part of me wonders if it is even the same bar as before? Based on the back wall looking very flat with the even radius around the edging, it looks to me like this could be a wedge instead. Won't know for sure till we can see a profile shot.Yeah, it definitely looks like a different kinda bar.
(Attachment Link)
LZ GH Sample build....Test done.
Gray and Brass(PVD)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
LZ GH Sample build....Test done.
Gray and Brass(PVD)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
LZ GH Sample build....Test done.
Gray and Brass(PVD)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
LZ GH Sample build....Test done.
Gray and Brass(PVD)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
LZ GH Sample build....Test done.
Gray and Brass(PVD)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Hummmmmm.....
want it? Round bar?
(Attachment Link)
(Attachment Link)
Possible to buy PCB and plate only? I want a brass plate for my original LZ-GH. :)
Hummmmmm.....
want it? Round bar?
(Attachment Link)
(Attachment Link)
Hummmmmm.....
want it? Round bar?
(Attachment Link)
(Attachment Link)
Yes, I would definitely prefer the round bar
Hummmmmm.....
want it? Round bar?
(Attachment Link)
(Attachment Link)
Hummmmmm.....
want it? Round bar?
(Attachment Link)
(Attachment Link)
Hummmmmm.....Looks way better imo! Can you have an option for the original backplate and bar aswell? :)
want it? Round bar?
(Attachment Link)
(Attachment Link)
Hummmmmm.....
want it? Round bar?
(Attachment Link)
(Attachment Link)
Hummmmmm.....
want it? Round bar?
(Attachment Link)
(Attachment Link)
Hummmmmm.....Yup. Looks more like the original.
want it? Round bar?
(Attachment Link)
(Attachment Link)
Hummmmmm.....
want it? Round bar?
(Attachment Link)
(Attachment Link)
Possible to buy PCB and plate only? I want a brass plate for my original LZ-GH. :)
Pcb compatible. but
Switch plate are not compatible.
iirc the screw-wings (idk what to call the little flaps where you mount the plate to the case) looks different from the original one.Possible to buy PCB and plate only? I want a brass plate for my original LZ-GH. :)
Pcb compatible. but
Switch plate are not compatible.
Oh yeah, I didn't think about the new case design having thicker walls.
I prefer square bar, round bar makes it look more like a toy to me. :'(
Oh well
I prefer square bar, round bar makes it look more like a toy to me. :'(
Oh well
You get out of here with your differing personal opinions and feelings
why do people like bar over a keyboard that has no-bar (like camp c225). Is there typing benefits or is it just because of looks?
I prefer square bar, round bar makes it look more like a toy to me.
Oh well
You get out of here with your differing personal opinions and feelings
I actually really liked the aesthetic of the square bar as well but I guess that's not a really popular opinion here.
Round bar please. Is blue an option?
Round bar please. Is blue an option?
Or that awesome tan from round 1
Hummmmmm.....
want it? Round bar?
(Attachment Link)
(Attachment Link)
Round bar please. Is blue an option?
Or that awesome tan from round 1
don't think there was a tan, just black, grey, and red
Round bar please. Is blue an option?
Or that awesome tan from round 1
don't think there was a tan, just black, grey, and red
What color is skcheng's then?
Round bar please. Is blue an option?
Or that awesome tan from round 1
don't think there was a tan, just black, grey, and red
What color is skcheng's then?
Not sure about skcheng's, but I don't think it was offered that color through the GB.
But, a tan, or especially beige coated case option would be sweet.
Round bar please. Is blue an option?
Or that awesome tan from round 1
don't think there was a tan, just black, grey, and red
What color is skcheng's then?
Not sure about skcheng's, but I don't think it was offered that color through the GB.
But, a tan, or especially beige coated case option would be sweet.
Sorry his was this military color.
https://flic.kr/p/pyrxA4
Round bar please. Is blue an option?
Or that awesome tan from round 1
don't think there was a tan, just black, grey, and red
What color is skcheng's then?
Not sure about skcheng's, but I don't think it was offered that color through the GB.
But, a tan, or especially beige coated case option would be sweet.
Sorry his was this military color.
https://flic.kr/p/pyrxA4
Looks like both the case and plate were re-anodized to different colors than original. And a brushed finish applied to the stainless bottom housing and bar.
+1 for the square bar.
-1,000,000 for making V2 look like V1
아크릴 디퓨저 테스트베리 나이쓰
(Attachment Link)
아크릴 디퓨저 테스트
(Attachment Link)
blue? ;D
blue? ;D
Sorry the blue is all sold out
blue? ;D
Sorry the blue is all sold out
pink? :eek:
아크릴 디퓨저 테스트
(Attachment Link)
아크릴 디퓨저 테스트
(Attachment Link)
blue? ;D
아크릴 디퓨저 테스트
(Attachment Link)
아크릴 디퓨저 테스트
(Attachment Link)
아크릴 디퓨저 테스트
(Attachment Link)
Dark blue? :)
That's a brushed stainless steel bottom.
아크릴 디퓨저 테스트
(Attachment Link)
That's a brushed stainless steel bottom.
I was thinking that also, but I didn't want to get my hopes up.
아크릴 디퓨저 테스트
(Attachment Link)
That's a brushed stainless steel bottom.
That's a brushed stainless steel bottom.
I thought it was brushed brass...
In the top left of the brushed stainless/brass photo, you can see what looks like proper brass, the rest of the metal being much less yellow.
In the top left of the brushed stainless/brass photo, you can see what looks like proper brass, the rest of the metal being much less yellow.
Board would sound better and hopefully be less expensive with an alu bottom, but people like their heft.
Glad to see the round bar! Looks awesome :thumb:
LZ, when do you think the GB will start? I want to plan this properly to make sure I have the right amount of funds at the right time.
Haven't had a chance to go through the whole thread, but was a layout decided on?
Sent from my SM-G900W8 using Tapatalk
LZ, when do you think the GB will start? I want to plan this properly to make sure I have the right amount of funds at the right time.
By the end of March?
Awesome, Thanks.Haven't had a chance to go through the whole thread, but was a layout decided on?
Sent from my SM-G900W8 using Tapatalk
TKL Winkeyless or Winkey.
LZ, when do you think the GB will start? I want to plan this properly to make sure I have the right amount of funds at the right time.
By the end of March?
Any idea of the kit price yet?
LZ, when do you think the GB will start? I want to plan this properly to make sure I have the right amount of funds at the right time.
By the end of March?
Any idea of the kit price yet?
base kit is $400 or less
LZ, when do you think the GB will start? I want to plan this properly to make sure I have the right amount of funds at the right time.
By the end of March?
Any idea of the kit price yet?
base kit is $400 or less
LZ, when do you think the GB will start? I want to plan this properly to make sure I have the right amount of funds at the right time.
By the end of March?
Any idea of the kit price yet?
base kit is $400 or less
LZ, when do you think the GB will start? I want to plan this properly to make sure I have the right amount of funds at the right time.
By the end of March?
Any idea of the kit price yet?
base kit is $400 or less
Removed threadcrap :)Nice!! :D
Removed threadcrap :)
Removed threadcrap :)
Removed threadcrap :)
How does this kind of GB get run? Is it raffle or FCFS?
Maybe...next week?