Author Topic: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]  (Read 119839 times)

0 Members and 1 Guest are viewing this topic.

Offline Okonomiyaki#2832

  • Posts: 549
  • Eating Okonomiyaki
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #200 on: Fri, 13 December 2019, 19:42:11 »
Stay strong MXSS.

Offline AuthenticDanger

  • Posts: 402
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #201 on: Fri, 13 December 2019, 19:49:07 »
In in 100%. Soldier on and keep us updated as you crush through the problems. You got this!
F Keys belong on the left.

Offline TieuNgu

  • Posts: 193
  • Location: US, AZ
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #202 on: Fri, 13 December 2019, 19:51:24 »
any timeline on producing a new weight? I don't mind waiting for it, just making sure that it would eventually resolve the issue.

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #203 on: Fri, 13 December 2019, 19:57:48 »
any timeline on producing a new weight? I don't mind waiting for it, just making sure that it would eventually resolve the issue.
Going to prototype first, it's a small modification but just waiting on my designer to do it anyway since I've only done QC in CAD up until now lol.
I'll provide a time estimate when I get one, the factory is pretty occupied with keyboard orders are this point so I'm letting my fingers crossed on this one.

Offline Captain Shwah

  • Posts: 91
  • Location: California
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #204 on: Fri, 13 December 2019, 20:16:34 »
I have no problem waiting either. I just appreciate everything you're putting into trying to make this perfect. No matter what, MxSS is still a super cool and unique board and I'm happy to be one of the lucky few to get one <3

Offline dantambok

  • Posts: 963
  • Location: Goutland
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #205 on: Fri, 13 December 2019, 20:31:43 »
I am amazed by your resilience blue. Thank you for not giving up and just giving us a sub-par product.  :thumb:

the true test of a man's character.
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 /  Quantrik Hachi /  Quantrik  Kyuu / Duck Orion V2 / TGRxSinga Unikorn R1 / 2x Unikorn 2.2 / Quantrik QXP /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix 2.0CP / Kira80 / Exent 65% / FMJ60 / Haus 65 / Kikuichimonji / Cake 60 / 2x AU Unikorn  Commission/ LZ XE / Paraluman 60 / AI03 Andromeda / Dalco 959 Mini GT / LZ Erghost /  Finder Works Hyphen / 2x Singa Kohaku / Linworks EM8 / GAFxTGR 910 / TGRxKLC Dolice / TGR 910v2 ME / Noxary Valhalla / Hiney Ibis / LZ REs / PerryWorks MC65 / Hiney Poly TKL One / RS60 / Zekk RBB / QK80 / Keycult No 2 TKL / FLX Virgo r2 / Matrix Navi

Coming --   Lynx50 (wixx scammed us) / Ladybird60 / JJW Derivative / TGR Shi

100+ GMK sets


Offline Kevadu

  • Posts: 382
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #206 on: Sat, 14 December 2019, 13:53:13 »
This kit still has something totally unique that other polycarb boards are lacking, and that's SMK support.  I'll wait as long as it takes to get a nice SMK board...

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #207 on: Tue, 24 December 2019, 15:44:54 »
Placed an order for a prototype SS and Brass weight last week and when asked for a rough completion date, they said they'df get back to me and well it's been a week... So anyhow, will keep everyone posted with that.

Offline Artemie

  • Posts: 99
  • Location: Singapore
  • Don't Let Your Memes Be Dreams
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #208 on: Sun, 05 January 2020, 06:50:39 »
MxSS is still happening, just received it in the mail.

Lighting is terrible, though.

Mirrored MxSS so that the wording spells "MxSS".
233078-0

233080-1

233082-2
| 420CL | Fanoe | Porpoise | KFE R1 Silver| MxSS |  is0 Pink & Silver | HBCP Polycarbonate | Matrix 2.0 Additional Purple | TGR Police | Singa Jaguar Green | KFE R2 Blue | RS so lit | Dolch CR Black | Jelly 60 Blue | Belle en Rose | Kei R2 Olive | Dalco 959 Mini | Aripeko
More
Boards in GB: | IU board |
Previous Boards: QXP | Singa  | UTD | Taichi | Jane v2 Red | Jane v2 CE

Offline AuthenticDanger

  • Posts: 402
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #209 on: Sun, 05 January 2020, 10:41:35 »
MxSS is still happening, just received it in the mail.

How'd you swing that?  :))

Still excited for this as it'll likely be my first and last polycarb board.
F Keys belong on the left.

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #210 on: Sun, 05 January 2020, 16:03:52 »
MxSS is still happening, just received it in the mail.

How'd you swing that?  :))

Still excited for this as it'll likely be my first and last polycarb board.

Shipped him one with a warped weight early. Still waiting to hear back from the factory re new weights, will prod them today.

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #211 on: Mon, 20 January 2020, 02:21:09 »



It is flat. We good.
I'll put the order in before CNY if I can, though no idea on what kind of lead times to expect at this point. Will keep everyone updated.

Also fyi, weight is now 4mm thick, protrudes 1mm out of the weight slot and is heavier. Does not interfere with the PCB or anything. I'll be going for brass for the large order.

Offline avtar

  • Posts: 498
  • Location: Toronto, Canada
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #212 on: Tue, 21 January 2020, 11:02:51 »
If there are any extras I would love to pick one up 🙏

Offline AuthenticDanger

  • Posts: 402
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #213 on: Tue, 21 January 2020, 11:29:30 »
Heck yeah! We're all happy to see you're getting this sorted out.  :thumb:

Gotta start lubing switches!
F Keys belong on the left.

Offline dwarflemur

  • Posts: 166
  • Location: cali
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #214 on: Wed, 22 January 2020, 12:01:50 »
Yooooo awesome
Camp C225 | Norbatouch | ALF X2 + X3 | Orange TKL | CA66 | Leaf 60 | a bunch of others

Offline dantambok

  • Posts: 963
  • Location: Goutland
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #215 on: Wed, 22 January 2020, 19:56:27 »
gotta say, those matte weights look hella better than PVDd ones
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 /  Quantrik Hachi /  Quantrik  Kyuu / Duck Orion V2 / TGRxSinga Unikorn R1 / 2x Unikorn 2.2 / Quantrik QXP /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix 2.0CP / Kira80 / Exent 65% / FMJ60 / Haus 65 / Kikuichimonji / Cake 60 / 2x AU Unikorn  Commission/ LZ XE / Paraluman 60 / AI03 Andromeda / Dalco 959 Mini GT / LZ Erghost /  Finder Works Hyphen / 2x Singa Kohaku / Linworks EM8 / GAFxTGR 910 / TGRxKLC Dolice / TGR 910v2 ME / Noxary Valhalla / Hiney Ibis / LZ REs / PerryWorks MC65 / Hiney Poly TKL One / RS60 / Zekk RBB / QK80 / Keycult No 2 TKL / FLX Virgo r2 / Matrix Navi

Coming --   Lynx50 (wixx scammed us) / Ladybird60 / JJW Derivative / TGR Shi

100+ GMK sets


Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #216 on: Wed, 22 January 2020, 20:07:31 »
gotta say, those matte weights look hella better than PVDd ones

After having them in front of me, can say I feel the same. Oh well, choices made in a time past.

Alas, I did not manage to make the cut so I'm waiting for post CNY to get quotes and schedule production. Max, you can take your time lubing those switches  ^-^

Offline TieuNgu

  • Posts: 193
  • Location: US, AZ
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #217 on: Thu, 23 January 2020, 00:52:32 »
It's been a while so I don't remember my plate /weight choice. But if you haven't re-ordered, I would really like for mine to be matte.

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #218 on: Thu, 23 January 2020, 00:54:36 »
It's been a while so I don't remember my plate /weight choice. But if you haven't re-ordered, I would really like for mine to be matte.
Unfortunately I couldn't fulfill those choices since they got warped... Everyone is getting matte brass now. Hopefully that should be alright.

Offline TieuNgu

  • Posts: 193
  • Location: US, AZ
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #219 on: Thu, 23 January 2020, 08:34:54 »
It's been a while so I don't remember my plate /weight choice. But if you haven't re-ordered, I would really like for mine to be matte.
Unfortunately I couldn't fulfill those choices since they got warped... Everyone is getting matte brass now. Hopefully that should be alright.
Perfect!  :thumb:

Offline bthezebra

  • Posts: 464
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #220 on: Thu, 23 January 2020, 14:00:03 »
It's been a while so I don't remember my plate /weight choice. But if you haven't re-ordered, I would really like for mine to be matte.
Unfortunately I couldn't fulfill those choices since they got warped... Everyone is getting matte brass now. Hopefully that should be alright.
Perfect!  :thumb:
Agreed this is great news! Love the look of matte as well :)

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #221 on: Thu, 30 January 2020, 21:43:58 »
Factory's let me know that they're closed down until the 10th of Feb. I suspected as much but was waiting for contact to let you guys know.

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #222 on: Thu, 06 February 2020, 22:16:07 »
Got word factory closure is extended till the 17th. Will keep everyone updated.

Offline Chadtucket

  • Posts: 7
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #223 on: Tue, 11 February 2020, 13:20:18 »
Any room for extras or will any additions ones be made??

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #224 on: Wed, 12 February 2020, 05:44:19 »
Any room for extras or will any additions ones be made??

No more will be made, I may have some extras but I'm dealing with those after I get the main GB participants all good and well. Lots of B stock, but I lack the lacking supplies and PCBs to sell all of those too. Again, will deal with after the GB.

In other news, I'm glad to announce that MxSS is now VIA supported! If you already have your MxSS, simply compile the 'via' keymap with an up-to-date QMK repo or download the firmware below.
The firmware and VIA config on the official repos supports configuration for underglow and the keymap, while the below firmware and VIA config also allow for configuration of the front LED.




Above is the extra config from the VIA JSON below. This requires compiling the mxss-via-rgb-pr QMK branch from my repo or downloading the firmware below and flashing it to your keyboard. The JSON can then be loaded in VIA by enabling the Design tab in Settings and loading this JSON file in the new Design tab. This JSON will need to be loaded every time you want to change these particular settings through VIA for now.
Brightness and Effect correspond to the front LED brightness and modes respectively. The indicator color configuration in Advanced corresponds to the colors shown in Indicator Mode. Special thanks to Olivia for working with me to get all this working :D

If there are any strange issues with corrupt keymaps or general strange behaviour, try resetting the EEPROM by holding down the Esc key (top left most) while in the keyboard and flashing the firmware again.

Disclaimer: The custom VIA JSON below is not in the official repo because the way VIA handles some of the special controls it implements are subject to change. Once a more official way to configure these options comes about, I will implement that so there are no extra steps for loading the config. For now, the below JSON will work with VIA version 1.2.4, and functionality beyond that may change.

Firmware: https://drive.google.com/file/d/1PRSvxjyE6XcnnrwXcoGix204xQExaI9J/view?usp=sharing
Firmware source: https://github.com/MxBlu/qmk_firmware/tree/mxss-via-rgb-pr/keyboards/mxss
VIA JSON: https://raw.githubusercontent.com/MxBlu/keyboards/mxss-rgb/src/other/mxss/mxss.json

You can find VIA here: https://github.com/the-via/releases/releases/latest
« Last Edit: Wed, 12 February 2020, 05:47:26 by MxBlue »

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #225 on: Sun, 01 March 2020, 21:50:27 »
Hi all,

Finally got a quote back from the factory, they're asking for another grand so spare me a bit to negotiate and save my wallet a smidge.
In the meanwhile, I realised that I totally forgot that clearcoating brass was an option.

The current spec has the weights as sandblasted brass without coating. Honestly, I much prefer the colour of raw sandblasted brass to clearcoated (it tends to turn a more brown shade) but if the majority of participants want clear coat, I'll swap over to it.

I'll email out the preference forms, PM/email me if you didn't get one in the next hour. You only need to fill it out if you care for which you get, I will take majority opinion.

Thanks,
Mx

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #226 on: Mon, 02 March 2020, 02:59:57 »
Alright, scratch the options, looks like the factory seals the brass after sandblasting as a standard. Considering the colour and quality that turned out, I think we'll be alright.
Also for those interested, looks like the higher cost was due to it being 4mm brass, and them not having 4mm brass sheets.

Consider me jumping the gun as trying to get things done fast :))
Do keep in mind that the factory is running in reduced capacity, so even a simple order will take a bit. Will let people know how things are going when I know.

Thanks,
Mx
« Last Edit: Mon, 02 March 2020, 03:01:32 by MxBlue »

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4179
  • Location: Tennessee - USA
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #227 on: Wed, 04 March 2020, 16:15:46 »
Sounds like mostly good news.  Glad to hear.  :thumb:

Offline AuthenticDanger

  • Posts: 402
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #228 on: Mon, 09 March 2020, 15:04:35 »


Built mine last week. Polycarb Plate + U4 Silent Tactile switches.

 :thumb:
F Keys belong on the left.

Offline dommyy13

  • Posts: 35
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #229 on: Fri, 13 March 2020, 10:59:14 »
I would also be interested in purchasing an extra if there are any, will keep my eye on this thread for news! 

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #230 on: Sun, 22 March 2020, 08:52:46 »
Show Image


Built mine last week. Polycarb Plate + U4 Silent Tactile switches.

 :thumb:

:O how'd you get my MxSS

Offline jauny

  • Posts: 15
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #231 on: Tue, 24 March 2020, 21:58:50 »
Hi! Since some people have dropped off, is there any chances there are a few more units available?  ;D

Offline Poblopuablo

  • Posts: 75
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #232 on: Wed, 25 March 2020, 17:36:47 »
I too would be highly interested in one. If one is available, please dm me here of on discord poblopuablo#2344.

Offline ___q

  • Posts: 248
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #233 on: Sun, 05 April 2020, 14:11:23 »
Built mine yesterday. It was worth the wait, this thing is great. Thanks mxblue!

A few quick pics... ignore the messed up backslash key and the profiles on the three keys on the right, I only noticed those after uploading the pictures, and they've since been fixed.


Offline BigBabyJesus

  • Posts: 32
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #234 on: Wed, 15 April 2020, 07:35:52 »
Will this board make a return? Or someone willing to let one go?

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #235 on: Wed, 29 April 2020, 04:22:12 »
Hi all!

So good news, the factory finished up on all the new brass weights on Friday! Bad news unfortunately, is that the cost to ship them to me is currently at half the price of the actual parts due to the current situation...
For the time being, after discussing with the factory rep, we agreed to wait it out for a month and see where prices go there. If the prices don't improve, I'll cop the cost myself.

Will this board make a return? Or someone willing to let one go?

See the pain I've gone (and going) through, v unlikely unless some vendor wants to take it on themselves haha. There will likely be a handful of extras after I finish up, will post in the thread once I'm ready to sell those.

Thanks,
Mx

Offline dantambok

  • Posts: 963
  • Location: Goutland
Re: [GB] MxSS - Polycarb 65% Kit for MX/SMK [Kinda close to finishing again?!]
« Reply #236 on: Wed, 29 April 2020, 12:04:30 »
Hi all!

So good news, the factory finished up on all the new brass weights on Friday! Bad news unfortunately, is that the cost to ship them to me is currently at half the price of the actual parts due to the current situation...
For the time being, after discussing with the factory rep, we agreed to wait it out for a month and see where prices go there. If the prices don't improve, I'll cop the cost myself.

Will this board make a return? Or someone willing to let one go?

See the pain I've gone (and going) through, v unlikely unless some vendor wants to take it on themselves haha. There will likely be a handful of extras after I finish up, will post in the thread once I'm ready to sell those.

Thanks,
Mx

damn sorry to hear that. thank you for stepping up.
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 /  Quantrik Hachi /  Quantrik  Kyuu / Duck Orion V2 / TGRxSinga Unikorn R1 / 2x Unikorn 2.2 / Quantrik QXP /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix 2.0CP / Kira80 / Exent 65% / FMJ60 / Haus 65 / Kikuichimonji / Cake 60 / 2x AU Unikorn  Commission/ LZ XE / Paraluman 60 / AI03 Andromeda / Dalco 959 Mini GT / LZ Erghost /  Finder Works Hyphen / 2x Singa Kohaku / Linworks EM8 / GAFxTGR 910 / TGRxKLC Dolice / TGR 910v2 ME / Noxary Valhalla / Hiney Ibis / LZ REs / PerryWorks MC65 / Hiney Poly TKL One / RS60 / Zekk RBB / QK80 / Keycult No 2 TKL / FLX Virgo r2 / Matrix Navi

Coming --   Lynx50 (wixx scammed us) / Ladybird60 / JJW Derivative / TGR Shi

100+ GMK sets


Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Alright, I've got one of the boxes of weights and the other one is held up in customs for now.
I'll start working down the list and packing orders, will keep everyone posted.


Offline TieuNgu

  • Posts: 193
  • Location: US, AZ
Great news!!!!

Offline NorrittMTG

  • * Vendor
  • Posts: 45
  • Location: London UK
Totally missed this as it was before my time but really hoping there will be some extras!

Offline dantambok

  • Posts: 963
  • Location: Goutland
looking good baby
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 /  Quantrik Hachi /  Quantrik  Kyuu / Duck Orion V2 / TGRxSinga Unikorn R1 / 2x Unikorn 2.2 / Quantrik QXP /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix 2.0CP / Kira80 / Exent 65% / FMJ60 / Haus 65 / Kikuichimonji / Cake 60 / 2x AU Unikorn  Commission/ LZ XE / Paraluman 60 / AI03 Andromeda / Dalco 959 Mini GT / LZ Erghost /  Finder Works Hyphen / 2x Singa Kohaku / Linworks EM8 / GAFxTGR 910 / TGRxKLC Dolice / TGR 910v2 ME / Noxary Valhalla / Hiney Ibis / LZ REs / PerryWorks MC65 / Hiney Poly TKL One / RS60 / Zekk RBB / QK80 / Keycult No 2 TKL / FLX Virgo r2 / Matrix Navi

Coming --   Lynx50 (wixx scammed us) / Ladybird60 / JJW Derivative / TGR Shi

100+ GMK sets


Offline bthezebra

  • Posts: 464
Awesome to the progress and know that the finish line is now in sight  :thumb:

Offline dwarflemur

  • Posts: 166
  • Location: cali
ooooh awesome!
Camp C225 | Norbatouch | ALF X2 + X3 | Orange TKL | CA66 | Leaf 60 | a bunch of others

Offline MightyFineShindig

  • Posts: 43
  • Location: Melbourne, Australia
This is wonderful news!
Canoe | MxSS | M60-A | Aegis | Unikorn | Constellation

Offline tavidayo

  • Posts: 3
  • I see you okay?
This looks amazing. So sad I missed the first run. Hope I can nab one of those extras.

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Just a little update for everyone.

Packing order, will send them out in small waves first to make sure the postage system isn't busted. I'll have to start reaching out to people for address + phone.

Offline NorrittMTG

  • * Vendor
  • Posts: 45
  • Location: London UK
Awesome!

Any idea when you may be listing extras and/or B-stock?


Offline Captain Shwah

  • Posts: 91
  • Location: California
Woo! Nearly there  :)

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Shipped out the Aussie orders for a start. (ristretto, patersoN, I owe you brass parts, will get those organised shortly as well)

I've also discovered a bit of an issue with the the threads, namely the plate threads in this case. Screwing in the brass plate (and I suspect the black nickel plate will have similar) causes a bit of the coating on the inside of the hole in the plate to fall into the threads. This causes the threads to have this a light black coating on the inside unfortunately. This is less visible once the screws are inserted of course, but it is an unfortunate oversight on my part.

I've found carefully using a small qtip lightly soaked in a solvent like isopropyl does a great job of removing the black soot, though caution is needed since isopropyl will interact with the coating and cause some blotches.


There isn't much I can do about it at this stage, but I wanted to be transparent about the issue. As always, you're free to contact me if this bothers you.

Offline MxBlue

  • * Maker
  • Thread Starter
  • Posts: 219
  • Location: Sydney, Australia
  • buy my keyboard
Hey all,

Just letting everyone know that everything is packed and all, just shipping it out in batches. Awkwardly paused because I ran out of ink to print labels :)) Will get that sorted shortly.
Everyone down to invoice number 25 should have their board or have received an invoice by now. If you haven't, please contact me.

Thanks,
Mx