[IC] FOX × INETT：SQUARE 80% (GB started)

[Simen]

Beautiful! Will the PCB support ISO layout?

Oh, I am sorry to reply that ISO layout is not supported as fixed layout with hop swappable plate and pcb.

[Puddsy]

Beautiful! Will the PCB support ISO layout?

Oh, I am sorry to reply that ISO layout is not supported as fixed layout with hop swappable plate and pcb.

this is good

[York Chan]

Very cool, perfectly integrated with the roadster element

[apexshikari]

Looks fabulous ...


Sent from my iPhone using Tapatalk

[vewy_nice]

My next TKL right here...
Maybe I can actually get this one

[Simen]

My next TKL right here...
Maybe I can actually get this one

Phototype pictures shared. Hope you enjoy it 

Looks fabulous ...


Sent from my iPhone using Tapatalk

Thanks 

Very cool, perfectly integrated with the roadster element

Try my best to alight with trend 

[Evo_Spec]

It is a beautiful design.
I would like to add PANTONE 802C color.

Show Image

I also think this color with a black plate would look killer.

The design might be too loud for a lot of people but I honestly love it.
Do you have any of the estimated weights based on the prototypes?

[fruitofconfusion]

I would be very likely to join if a purple was added, like a few other members mentioned. This is a great board. Forgive me if I missed it, but I’d the PCB USB-C?

[Locnguyen1507]

Interested! Are there any top view of WKL layout from these prototypes?

[Puddsy]

Interested! Are there any top view of WKL layout from these prototypes?

im pretty sure those are renders

[Simen]

It is a beautiful design.
I would like to add PANTONE 802C color.

Show Image

I also think this color with a black plate would look killer.

The design might be too loud for a lot of people but I honestly love it.
Do you have any of the estimated weights based on the prototypes?

Estimated is around 3KG.  Exact weight will be updated once I weight it  :p

[Rak8886]

Definitely interested!!! Would like navy plate as an option. Planning to go for white case to go with GMK Mizu

[Simen]

Interested! Are there any top view of WKL layout from these prototypes?

I am taking photos with different keycaps, and will update them later.

[vision-quest]

I’d be in if there were a dark gray for sure! Such a nice board.

[JDragon]

Will silver be a color option?

[Peiweisgreat]

Yeah please have a black pvd option for the weight if you are going to have such a gorgeous yellow as a case option.

[Simen]

I’d be in if there were a dark gray for sure! Such a nice board.

Color options have been decides. Black is also nice and very close to grey, I will update phototype soon. Hope you enjoy it

[Simen]

Will silver be a color option?

oh, silver will be only included as a PVD brass weight option.

[Simen]

Yeah please have a black pvd option for the weight if you are going to have such a gorgeous yellow as a case option.

Sure, brass PVD with black was included 

[eskimojo]

Personally will have to give this a miss due to no ISO, but that yellow is gorgeous - I don't think you'll have any difficulty filling those 50 spots 

[Zambumon]

You got my attention with the "fixed layout" part 

[Sintpinty]

I wish i'd be able to afford this, but i always like these interests checks.

Can we get some love for our sandwich boards! 

[Simen]

You got my attention with the "fixed layout" part 

Fixed layout is perfect for players , no choice , haha, easy to know how to assemble it without thinking 

Personally will have to give this a miss due to no ISO, but that yellow is gorgeous - I don't think you'll have any difficulty filling those 50 spots 

Thanks a lot

[Simen]

I wish i'd be able to afford this, but i always like these interests checks.

Can we get some love for our sandwich boards! 

you should, I don't think the price is very expensive 

[Rob27shred]

OoOof, I am not a huge fan of TKLs but gotta admit to a killer design when I see one! These are really visually appealing boards, the extra bit of the plate that extends up through the case to outline all the keys make for a great & striking look with most color combos. Really great work here!

[Uryftw]

Is that "border around the keys" gonna be in the final board? If that's the case, I'm really digging it

[Damage]

Dumb question, maybe, or perhaps it's been covered here, but how if the plate is 4-mm thick, how do the switches snap into it? The tabs on a traditional switch are designed for a specific plate thickness, correct? Is the plate indented to let those tabs nestle into the plate?

This is a bit more of a concern with a hot-swap PCB, since there's no solder holding the switch legs.

[pixelpusher]

Dumb question, maybe, or perhaps it's been covered here, but how if the plate is 4-mm thick, how do the switches snap into it? The tabs on a traditional switch are designed for a specific plate thickness, correct? Is the plate indented to let those tabs nestle into the plate?

This is a bit more of a concern with a hot-swap PCB, since there's no solder holding the switch legs.

The switch openings are milled out to 1.5mm underneath to let the switches snap in on the top and bottom. 

[Simen]

Dumb question, maybe, or perhaps it's been covered here, but how if the plate is 4-mm thick, how do the switches snap into it? The tabs on a traditional switch are designed for a specific plate thickness, correct? Is the plate indented to let those tabs nestle into the plate?

This is a bit more of a concern with a hot-swap PCB, since there's no solder holding the switch legs.

Dumb question, maybe, or perhaps it's been covered here, but how if the plate is 4-mm thick, how do the switches snap into it? The tabs on a traditional switch are designed for a specific plate thickness, correct? Is the plate indented to let those tabs nestle into the plate?

This is a bit more of a concern with a hot-swap PCB, since there's no solder holding the switch legs.

The switch openings are milled out to 1.5mm underneath to let the switches snap in on the top and bottom. 

Here is a picture for plate for your reference hope it can be more clear.

[Simen]

Is that "border around the keys" gonna be in the final board? If that's the case, I'm really digging it

Absolutely, YES. We already have prototypes and make it in reality 

[Simen]

OoOof, I am not a huge fan of TKLs but gotta admit to a killer design when I see one! These are really visually appealing boards, the extra bit of the plate that extends up through the case to outline all the keys make for a great & striking look with most color combos. Really great work here!

Thanks. Yes, the 'inner rim' takes us a lot of time to think how to make it in reality. Finally, we found that it can connect with plate. But it actually bring more troubles for plate manufacturing. Hope you enjoy it 

[vi0till]

My question:

1. QMK compatible PCB will not have RGB?
2. GB date has been set?

[Simen]

My question:

1. QMK compatible PCB will not have RGB?
2. GB date has been set?

Thanks for looking.

1 YES, RGB light is not shipped with qmk compatible PCB.

2 It should be very soon. 

[nu_types]

No blue option? I really like the blue prototype that you have.

[blizzara01]

The color outline around the keycaps comes from the plate? I hope there will be no visible gap between the top piece and the outline color of the plate.

[Simen]

No blue option? I really like the blue prototype that you have.

During GB, I am sorry that blue option will be removed since it looks very nice in camera, but you will feel a little disappointed under normal light. Only beautiful options will be available in GB 

[Simen]

The color outline around the keycaps comes from the plate? I hope there will be no visible gap between the top piece and the outline color of the plate.

Yes, it comes from plate. As my feel for prototype, the gap between inner rim and case is not easy to detect, and we are trying our best to make it as close as we can .