[GB] GSKT-00 (Shipping almost finished, 80% done)

[sirieous]

For real though, I attribute me getting in this time on the second run partly because I saw that post giving us those tips. The one about zooming out so that there was less scrolling was actually big brain. After I filled in the first plate options I zoomed out completely because I just had to hit none for the rest. Shout out that dude.

[Zeelobby]

For real though, I attribute me getting in this time on the second run partly because I saw that post giving us those tips. The one about zooming out so that there was less scrolling was actually big brain. After I filled in the first plate options I zoomed out completely because I just had to hit none for the rest. Shout out that dude.

100x this. Might have helped more than anything else

Sent from my Pixel 3 XL using Tapatalk

[Hoipolloi]

For real though, I attribute me getting in this time on the second run partly because I saw that post giving us those tips. The one about zooming out so that there was less scrolling was actually big brain. After I filled in the first plate options I zoomed out completely because I just had to hit none for the rest. Shout out that dude.

what post?

i couldn’t get a spot. would love some tips for future.

[sirieous]

First page is your personal info, email user name etc. then it's a lot of multiple choice pages. Board layout, ano colour, pcb 1 and 2 colour, then 4 pages for 4 plates both alps and MX, cerakote option text field, extra gasket and screw set options, "yes i agree to bow to thee" check mark, and then the most important page; trivia! gotta get this one right or else

Also, side note, weaston already said he will be switching things up a bit so this info will probably be outdated.

Also also, it's common speedrunner tradition to not hold secret strats so I will give you an extra tip. Zoom out on the page to have more info on the screen at once. Less scrolling, more time save!

And if you think I am leaking important info that will mess with the competition you can go and sh

Thanks, yo. This is what I was wondering just like a gist of what to expect.

Idk what keyboards you use, but I have a layer on a QMK board that outputs strings such as my paypal email, GH username, etc. I suggest getting that setup. Wouldn't hurt to set up addresses too, but I doubt you would need that for this form

This post and the one that is being quoted is the one that really helped me. Hope it finds you some success in future boards. (Also sorry if this is an incorrect way to reply to the guy above, I'm still new to Geekhack posts and comments)

[Fnzzy]

I just got the email for the order sheet, thanks. Could you make the row with the "case, plate, pcb" etc. sticky so that we don't have to scroll up every time to see to what item the choice referred to? Just select row 7 and go view > freeze > up to current row.

[zekth]

I'm in the list and haven't received any email 

EDIT: Fixed

[weaston]

I was working through some google issues so you might have received a few emails and some of the sheets might be dead so sorry for the extra emails and thanks for bearing with me.

I have sent an email with a sheet containing the order number and the associated username to all the people I have emails for.  If you did not receive an email with the order number sheet then I do not have a correct email for you so please make sure to pm me so we can fix that.  You will still be able to view that sheet if someone sends you a link, so please take the time to make sure you personally received an email with it, otherwise like I said your email needs to be fixed.

Here is a link to a sheet with all order numbers and options.  As changes happen they will reflect on the sheet so make sure to keep checking back after I have said that I adjust your order: https://docs.google.com/spreadsheets/u/2/d/e/2PACX-1vRLejPDSIHsqjFcKOUVX6FZ2zLQnlj2-OIckvNC3iRKImaBA0kIa1XRI-EWQGybS8AOizBPLgyG1SM_/pubhtml?gid=0&single=true

Instructions for modifying your order, including what changes are allowed are outlined in the sheet.

My inbox is open here and on Discord, so feel free to send me a message.  Let me know if there are any questions/concerns.  Thank you all.

Edits are accepted until Monday January 27th at 5pm EST.  After that I will start sending invoices.

(Again there was another sheet I accidentally sent out, which was inaccurate, so please only reference the one above.  Thanks.)

[weaston]

Apparently some people aren't receiving any email from Google about the new order form sheet so I'm just posting it here.  Google is really giving me a hard time rn.

New Updated Username and Order Form Sheet here: https://docs.google.com/spreadsheets/d/e/2PACX-1vQMHo2QqRLlHx63qiji9BAJ_hCQ99DZ18Yz0rWARaZU7BEm1prhhhWArGpeGd2hQhtdz0dJ-jkFGhZz/pubhtml?gid=0&single=true

OP also updated.

[zekth]

For mailing i'd recommend to use a service like Mailchimp which has a free offer for the size of the GB: https://mailchimp.com/

It would be easier for you to handle all the updates and so on.

[noahf]

each kit comes with 1 gasket, correct? so if I ordered 2 kits, it comes with 2 gaskets?

[jrs]

each kit comes with 1 gasket, correct? so if I ordered 2 kits, it comes with 2 gaskets?

No, it just comes with a tube of silicone caulk that you need to put between the plate and the PCB.

[chayu]

Some people seem to have responded with wanting an extra plate/plate layout, but not selecting a plate option, or selecting they don't want a plate but then selecting a plate option.

Eg. No to Alps 2 but chose Polycarbonate

[weaston]

Some people seem to have responded with wanting an extra plate/plate layout, but not selecting a plate option, or selecting they don't want a plate but then selecting a plate option.

Eg. No to Alps 2 but chose Polycarbonate

Yeah i'll be cleaning that up as I go through and edit. I thought I got them all already but seems not, no biggie.

In response to earlier, yes each case comes with 1 gasket and 1 set of screws.

[jrs]

It doesn't look like a lot of people selected Alps plates, which kind of surprised me.  Wasn't the GSKT-00 designed with alps in mind?

[loud_asian]

Any chance you could post the alps plate options again? I'd love to add one to my order but I forgot what was available.

[nikkynak]

I was curious about the results on the form, and what everyone got. So I ran a few quick visualizations on the data.





I guess WKL is king

Edit:

Made the full/half difference more apparent through the colors

[Aznguyen316]

thanks nikkynak, I just did some Ctrl+F to see some numbers lol.  I am kind of surprised WKL was most ordered for a 60% in all colors. Debating on adding a half plate option.  Already have full POM.

[jrs]

I got the black HHKB with red half plate.  Still trying to decide on keycaps, but I'm leaning towards JTK BRED.

[joe405]

I didn't get an email either. My order and username are correct though. Have PM'd Weaston

[weaston]

I didn't get an email either. My order and username are correct though. Have PM'd Weaston

Yeah i don't think it sent an email like I expected it to, really not sure why. If anyone thinks they had a problem with their email then pm me, otherwise I suppose we'll find out when invoices start rolling out around Monday-Tuesday hopefully.

[Puddsy]

When will we have a chance to review our orders?  cuz I think I incorrectly entered one of the fields for plate options.

For what it's worth, from the IC thread.

well that is unfortunate, especially considering the practice form was incomparable to the actual form.  nbd, guess I'm not getting a half plate then 

what other GB has had a practice form anyways, not sure why it matters that is was different, you usually don't even know what in it till you open it

none which is why this gb is art

[zekth]

PM sent. GH + Discord 

[msvming]

PM Sent regards order 

[chayu]

Some other data points on the orders after cleaning up some of the entries when it was released on Friday:

- Total of 447 plates
- 217 are full (48.55%), 214 are half (47.84%)
- 224 are alu (50.11%), 102 are PC (22.82%), 97 POM (21.70%), 18 Steel (4.02%), 6 Acrylic (1.34%)
- 77 people got just 1 plate; 92 got 2, 24 got 3, 27 got 4, 1 person got 6, and 5 people have no plates (at least one of these people put partial/incomplete answers for plate options)

I ignored the Alps entries where a layout or full/half wasn't specified.

[weaston]

I've gotten a lot of pms since editing opened.  Have been letting them accumulate so I can tackle them all at once.  Will be doing the first edit wave tonight some time.  Thanks all.

[happa]

PM'd!

[Obe]

PM on GH and Discord.

[weaston]

I've gotten through about half of the change requests.  If I changed it then I responded, so if you have not received a response then you have not had your order updated yet.  Even if I did respond please check the public order sheet and double check, it's entirely possible I messed up or missed something so let me know if I did. 

Remember requests for edits end tomorrow at 5pm so get them in before then.

Thanks all.

[Quriosity]

PM sent.

[mech0nly]

PM sent. Thanks weaston!

[ymaaan]

PM sent in Geekhack as well. Thanks!

Sent from my SM-A505GN using Tapatalk

[Azirez]

PM sent yesterday. Don't see any changes in spreadsheets.

[mycarrotbroke]

Pm sent!


Sent from my iPhone using Tapatalk

[Haskel]

PM sent on Discord. Thanks for accommodating.


Sent from my iPhone using Tapatalk

[infinitecurry]

Sent pm yesterday

[aslanxdeft]

Pm sent

[jn_hanone]

PM sent!

[catamscott]

pm sent yesterday or day before (forget which), just wanted to note that here too before 5pm est.

[vegs]

PM sent as well

[hawkz]

PM sent on discord

[jpg2401]

I sent my PM on Geekhack two days ago. Noting that here now

Edit: It doesn't look like it went through, so I have just now sent a message.

[Zeelobby]

Pmed on discord with the additional gasket/screw

Sent from my Pixel 3 XL using Tapatalk

[frostfiree]

PM'd on GH about switching from full to half plate.

[Zurg Eon]

PMEMED!

[sJ1N]

PM'd as well on GH

[weaston]

Change requests are now closed.  I will start working on getting all the changes in.

Hopefully will start on invoicing tomorrow.

Thanks all

[cdhoffmann]

Change requests are now closed.  I will start working on getting all the changes in.

Hopefully will start on invoicing tomorrow.

Thanks all

NOICE

[mrpetrov]

Change requests are now closed.  I will start working on getting all the changes in.

Hopefully will start on invoicing tomorrow.

Thanks all

Hey weaston, I dm'd you on here and on GH but the google doc doesn't show my additional order request (extra pcb and alu mx half plate) - so not sure if you've changed to order doc online or just missed my dm's perhaps? Thanks mate!

[tkh531]

Change requests are now closed.  I will start working on getting all the changes in.

Hopefully will start on invoicing tomorrow.

Thanks all

Hey weaston, I dm'd you on here and on GH but the google doc doesn't show my additional order request (extra pcb and alu mx half plate) - so not sure if you've changed to order doc online or just missed my dm's perhaps? Thanks mate!

I also sent a PM on GH, this past Saturday (1/25). I'm sure hes just backed up with a bunch of messages.

[weaston]

Just got a lot of changes done, still have one more page of them to get through, should all be fully sorted by tomorrow night, then invoicing after that.  Thanks for being with me.

As I said before, if I made the requested changes I will have responded to you so check your pms then check the public sheet a while after, sometimes the changes take a few minutes to reflect.