[IC] 60% Poker compatible : PCB+Plate+Case : Full LED &Macro < GB Today !>

[sprit]

   
     
Group Buy Started!!

http://geekhack.org/index.php?topic=50580.0




   60%  mini  :  ANSI + ISO  


                                The Cutting-Edge Technology and Design




Hello, Everyone !   I am  sprit ,   a member of GeekHack  &  KBDmania.   ...  Spamming Colors  ... From The Back Space
my articles on 60% mini :      http://geekhack.org/index.php?topic=49405.0
my articles on KBDmania :     http://www1.kbdmania.net/xe/tipandtech
                                              http://www1.kbdmania.net/xe/?_filter=search&act=&mid=photo&category=&search_target=nick_name&search_keyword=sprit




At this Moment, I'd like to tell My Case Design Concept.

"  100% Interchangeable,   100% Interoperable,   100% Mix n Match !  "
  All 60%, 75%, 87% Cases will do.


 http://www.youtube.com/watch?v=xoTlxNRCFew&feature=youtu.be 
 http://www.youtube.com/watch?v=ZPuhuiQZxQs    Finale
 http://www.youtube.com/watch?v=IkbrkLIaISI&feature=youtu.be
 http://www.youtube.com/watch?v=HQF-l9NBtX8

 

The Design : Full LED and HW Macro   


-  Cutting-Edge Technology Design and QC  by THE CREATOR  of A.87 and MX-mini
-  He is the Most Famous Independent PCB Designer, Mr. BeastMask  From Korea.
-  The Creator himself developed the top-of-the-line :  A.87,  A.87 ps2avr,   A.87U,  MX-mini
-  USB and PS2 Auto-detect.  3rd generation.  Open Source based.
-  Designer's Page :  http://winkeyless.kr/67    http://winkeyless.kr/66       

 
Full LED Control   

-  Full LED control, latest LED modes, regularly updated.   Open Source based. 
-  LED modes at present : 1. Off   2. always On   3. fading, breathing, dimming   4. getting brighter   5. getting darker  6. Typing Reactive on / off  etc ....
-  New modes under development among the User groups.  Everybody Invited in GH.
-  LED modes  :     http://www.youtube.com/watch?feature=player_embedded&v=KaZKv8lTzHM  (Oct.12 : Firmware Upgraded)
-  LED Flight  -      http://www.youtube.com/watch?v=ZPuhuiQZxQs    (Oct.25)



Features
 
-  ANSI + ISO in one PCB. (concept design by sprit for ISO users)
-  All keys Programmable, Hardware Key mapping, HW Macro support. ATmega32A-AU controller. Open Source based.
-  Supports Cherry Stabilizers, both PCB mount and Plate mount types.
-  Supports FN key almost at any position You like.
-  Supports both Plate / PCB Connections to the Case  (suggested by sprit  for Systematic reasons)   
-  Extra 8 Support holes for PCB mount method with the case (suggested by sprit  for Oscillatory Kinetic reasons) 
-  Supports the Standard 6.25x Winkey,   1.25x1x1.25x 7x Winkeyless,     1x1.5x (6x) 7x 1.5x1     HHKB    1x1 BackSpace
-  Supports most Keycaps including Cherry Originals : Capslock, Spacebar, Enter, ANSI+ISO.



International GB

-  PCB Color options :  White,  Red,  Blue, Black- 1.6T (1.6mm) Heavy Duty PCB for GeekHack Users (suggested by sprit, for International Special Edition) 
-  Case Compatibility  : All 60% poker I, II, KBC Pure, and all poker compatible Alu, Acrylic Cases, etc... 
-  Price Policy  :         Fixed Price  50 USD  / 1pcb    (MoQ = 50 pcs  1.6T PCB,  ANSI+ISO, All  SMD parts are pre-soldered  and Tested =  Special Edition ) 
                                            (Bulk version : 1.2T PCB, bulk controller parts, No Resistors, No diodes,  ANSI only = 38 USD in Korea)
-  Delivery : Production in Two Weeks, Delivery in two Weeks.
-  Manufactured in Seoul, Korea, shipped from Seoul.
 

If You are interested, Vote as below.

-   ANSI / Red color / 2 PCB / Plate / Case             
-   ISO / white / 3 PCB / Plate / Case


* Case : design finished,  around  70 / 100 /150 USD        depends on Materials (Not Fixed),  Pics will come When GB starts.
1.   Acryl Case : Clear, White, Yellow, Orange, Red, Green, Lime, Blue, Black, etc         ~ 70 USD
2.   Carbon Case (Polycarbornate)                               ~ 100 USD
3.   Metal Case  : lots of Colors       * pics will show with GB start.c          ~ 150 USD


* Korean User Manual updated  Oct.16  http://winkeyless.kr/68
* English User Manual will be available soon,  before shipping.


* Pics below are Face U ( 1.2T, green, ANSI only version,  released  Oct.17 in Korea) 

[Photekq]

How much would it cost?

Might be good for those who missed out on the GH60 GB.

[JPG]

I am interested in ANSI/whatever color but prob white #1 and red #2/ 1-2 (depends on price and answers)

1. What would be the price tag?
2. What controller will be used?
3. What's the expected production date?

[Sifo]

Depends on price :O

[sprit]

Thank You a lot!    More Details updated !

[Sifo]

ANSI | Blue/White | 1-2 pcs

[MOZ]

ANSI | Red/White | 1pcs

[Signature]

So diodes are already soldered?

[keymaster]

ANSI | Black | 1 pcs

[AKmalamute]

If I read that correctly, it's $50 (plus shipping?) with MOQ of 50, and yes SMD pre-soldered.

A very good deal and very interesting (I'd go for ANSI) but I have a tiny question about this series of 60% boards. See, I'm sold on my dedicated arrow keys (WKL is fine) and can't tell but it looks like this board doesn't really support enough 1x keys down in the right hand corner for that.

 Comments?

[JPG]

Hum, at 50$ I would be down for 1, ANSI (1.25), color GREEN!!! (well, if not available like in picture, color choice would be white, but any other would be fine also)

[sprit]

If I read that correctly, it's $50 (plus shipping?) with MOQ of 50, and yes SMD pre-soldered.

A very good deal and very interesting (I'd go for ANSI) but I have a tiny question about this series of 60% boards. See, I'm sold on my dedicated arrow keys (WKL is fine) and can't tell but it looks like this board doesn't really support enough 1x keys down in the right hand corner for that.

 Comments?

May I answer with this pic ?   You may do it with 4 keys on the right corner as arrow keys, shown in the in the pic. You may save Shift key for the up arrow by Fn + down arrow .   
No near future support for the four 1x keys in the right bottom row is planned, for PCB Stability and SW Solidity issues down there.

[AKmalamute]

May I answer with this pic ? 
[/quote]
Touché. 1pcs / ANSI then.

[LONGZILLA]

Missed out on the GH60, interested

[nubbinator]

$50?  I'd probably be in for a pair or three if I have the money at the time.

ANSI|White/Black|1-3

[JPG]

Also, what cable is supported by default? usb or ps2? Also, will the code be opensource and pre-installed?

[sprit]

Also, what cable is supported by default? usb or ps2? Also, will the code be opensource and pre-installed?

USB and PS2 Auto-detect, thx a lot for your precious point!

[naokira]

Very interested. 1 ISO Black and 1 ANSI White

[LONGZILLA]

ANSI White x 1

[xandr]

ISO Black x 1

[sprit]

Details updated 

[AKmalamute]

OK so now that I've seen both your IC's I can say I like them both ... but will not, myself, be able to get one of each.

So, when the GB happens, I'll quick-like source a plate, I guess, and whichever size plate I can get more reasonably I'll order a matching PCB with SMDs in ANSI. Don't care red/black/green/purple.

[sprit]

May I answer with this pic ? 

Touché. 1pcs / ANSI then.

Hello, What kind of Touché ?  Touch....  not Entre ,.... ?   

[sprit]

I am interested in ANSI/whatever color but prob white #1 and red #2/ 1-2 (depends on price and answers)

1. What would be the price tag?
2. What controller will be used?
3. What's the expected production date?

More details updated!  further questions welcomed!

[jonathanyu]

ansi/ whatever color except white/ 2-3

[BunnyLake]

I'm in for sure

[sprit]

$50?  I'd probably be in for a pair or three if I have the money at the time.

ANSI|White/Black|1-3

The price is refered to the established PCB price system. For example, latest and Not pre-soldered MX-mini and A.87 (designed by BeastMask) are around 38~42 USD incl. tax, in Korea.

http://www1.kbdmania.net/xe/market_info/7508028      http://winkeyless.kr/65     

FaceU  : 1장당 38,500원 (부가세 포함, 현금 영수증 발행)     = translation  = 장당 38,500 KRW /1pcb  =  38 USD un-assembled, bulk parts.

[bueller]

ANSI  2  WHITE

[Jrwestcoast]

I'm in for an ANSI also. 

[pichu23]

Ansi - White - 1

[frogamic]

Can the ISO version support an ANSI size left shift key?

[Dubsgalore]

Very Interested, I'm in

showing my love for sprit 

[sprit]

Can the ISO version support an ANSI size left shift key?

Sure!   For ISO, We are ready for any Request!        No Worries !   ANSI + ISO in one PCB !

[bueller]

Holy balls these support Alps too?!?! Make that 2 for me.

[Dubsgalore]

I think im going to get one or two of these, but the only problem is that i don't have my plates yet 

[sprit]

Holy balls these support Alps too?!?! Make that 2 for me.

ALPS will be another independent PCB.      And the most good thing of It is Pan Alps! (Dell, SGI, Apple compatible,  still under final revision now.)

[AlexJP]

Ansi   white  1pcb
ISO   blue    1pcb

very nice 

[bueller]

Holy balls these support Alps too?!?! Make that 2 for me.

ALPS will be another independent PCB.      And the most good thing of It is Pan Alps! (Dell, SGI, Apple compatible,  still under final revision now.)

Ah okay, I'll probably order two of the MX PCB's anyway haha

[Forever]

 ANSI / Black color / 1 pcb
 ANSI / White color / 1 pcb
All Denpend On PRICE

[naokira]

Question: what led modes are available right now?

I'm planning to make my capslock a shiftlock with a cherry mx lock key, so the led on it must be

only activated when on hold since its on hold. If that its not available please suggest so. Thanks!

[frogamic]

ISO / green / 1 pcb

edit: changed colour preference

[phoenix1234]

It looks great,
I'm interested in:
ANSI / Black color / 1 pcb
ANSI / Blue color / 1 pcb

Thanks 

[sprit]

Question: what led modes are available right now?

I'm planning to make my capslock a shiftlock with a cherry mx lock key, so the led on it must be

only activated when on hold since its on hold. If that its not available please suggest so. Thanks!

-  Full LED control, latest LED modes, regularly updated.  Open Source based.
-  LED modes at present : 1. Off   2. On   3. fading, breathing   4. getting brighter   5. getting darker  6. push on  : new modes being developed.

-  LED preview :  http://www1.kbdmania.net/xe/photo/7439979    need to be updated.
[/size]

[BliTzKiN]

Awesome!
Intersted in:

ANSI / Black / 1 PCB
ANSI / White / 1 PCB

[nubbinator]

I just noticed this:

"-  the essential SMD parts pre-soldered and tested."

Are there some SMD components for other facets of the keyboard that won't come soldered in place?

[sprit]

I just noticed this:

"-  the essential SMD parts pre-soldered and tested."

Are there some SMD components for other facets of the keyboard that won't come soldered in place?

Hello! Nice Shot! ^^  Chip resistors! for LEDs depends on Qty,  Machined, or Hand-Arbeit 

[longweight]

ISO / black / 1pcb

[bueller]

Do you have a time-frame for when this GB will be starting?

[sprit]

Yes Sir!  From Monday or Tuesday will be OK for You? 

The shipping will start  in 14 days from the Group Order.

[longweight]

How long will it run for?