[IC] 60% Poker compatible : PCB+Plate+Case : Full LED &Macro < GB Today !>

[bueller]

Yes Sir!  From Monday or Tuesday will be OK for You? 

The shipping will start  in 14 days from the Group Order.

Sounds good to me!

[sprit]

How long will it run for?

actually depends on the Qty of ISO....   

[longweight]

How many ISO boards do we need? 50?

[MOZ]

Isn't the same PCB used for ISO and ANSI?

[pmh1410]

Wow, Spirit. It's likely as Thumb PCB ?

[longweight]

ISO / black / 1pcb

Now:


ISO / black / 1pcb
ISO / white / 2 pcb

[sprit]

Wow, Spirit. It's likely as Thumb PCB ?

thumb has smaller profile it's own,  too much room to fit into Poker.

[sprit]

How many ISO boards do we need? 50?

Yes right ! Mr. longweight!

[longweight]

The OP is misleading, you state the ANSI/ISO are on one PCB, if that is the case then why do we need 50 ISO PCBs?

[sprit]

The OP is misleading, you state the ANSI/ISO are on one PCB, if that is the case then why do we need 50 ISO PCBs?

Just in case, for ISO plates and production rev. bugs, retouch patterns etc. So we need a certain level of qty'  But I deadly love to produce ANSI + ISO !  for my taste! sorry for me! 

[MOZ]

Do we get the textured PCB?  They look really good.

[jdcarpe]

ANSI / White color / 1 PCB

[BunnyLake]

ANSI White 2

[CPTBadAss]

ANSI / Black Color / 1 PCB

[longweight]

Everyone vote for ISO! That way we get a PCB that can do both ISO and ANSI.

[naokira]

Question: what led modes are available right now?

I'm planning to make my capslock a shiftlock with a cherry mx lock key, so the led on it must be

only activated when on hold since its on hold. If that its not available please suggest so. Thanks!

-  Full LED control, latest LED modes, regularly updated.  Open Source based.
-  LED modes at present : 1. Off   2. On   3. fading, breathing   4. getting brighter   5. getting darker  6. push on  : new modes being developed.

-  LED preview :  http://www1.kbdmania.net/xe/photo/7439979    need to be updated.
[/size]

Thanks for answering! So no-go on my plan on the shift lock led?

[nissarup]

1 ISO. Color not important.

[sprit]

Question: what led modes are available right now?

I'm planning to make my capslock a shiftlock with a cherry mx lock key, so the led on it must be

only activated when on hold since its on hold. If that its not available please suggest so. Thanks!

-  Full LED control, latest LED modes, regularly updated.   Open Source based.
-  LED modes at present : 1. Off   2. On   3. fading, breathing   4. getting brighter   5. getting darker  6. push on  : new modes being developed.

-  LED preview :  http://www1.kbdmania.net/xe/photo/7439979    need to be updated.

Thanks for answering! So no-go on my plan on the shift lock led?

I will check it!!     

[yicaoyimu]

Just want to make sure, will this PCB fit GON's GH60 case?

[TLSC.wipeOut]

ANSI | Blue/White |1-2 pcs
Depending on the price

[naokira]

Just want to make sure, will this PCB fit GON's GH60 case?

I believe it is. Since they are both compatible with poker cases.

[Dubsgalore]

for official count

ANSI / WHITE / 2 PCB

and it does look like it will fit every 60% case..which is good 

[nubbinator]

I just noticed this:

"-  the essential SMD parts pre-soldered and tested."

Are there some SMD components for other facets of the keyboard that won't come soldered in place?

Hello! Nice Shot! ^^  Chip resistors! for LEDs depends on Qty,  Machined, or Hand-Arbeit 

I'm not sure what you're saying.  Are you saying that the LED resistors aren't soldered on? 

[yicaoyimu]

Just want to make sure, will this PCB fit GON's GH60 case?

I believe it is. Since they are both compatible with poker cases.

That's what I think too 

ANSI / Black / 1 PCB

[keymaster]

...and I just sold my Cherry MX stuff. WHEN WILL IT END

[longweight]

Is it not possible to just include the ISO changes? I am sure that most would like the option to use the PCB as ISO but I don't think that we will get 50 ISO votes.


Maybe make the situation clearer in the OP? What would the price implication be for ISO inclusion?

[GeorgeK]

I'm really confused by this - is it a combination PCB like the GH60 where you can have both ANSI and ISO on the same PCB or are they separate?  Are we voting for whether we'd want one or the other? Are we voting for the colour of the PCB too?

[Dubsgalore]

I'm really confused by this - is it a combination PCB like the GH60 where you can have both ANSI and ISO on the same PCB or are they separate?  Are we voting for whether we'd want one or the other? Are we voting for the colour of the PCB too?

I believe it has the ability to use both ISO & ANSI all in one pcb..but i'm not sure

it has a lot of bottom row layout options, similar to the GH60

There are 4 color options too, Red, Blue, Black, White

[MOZ]

This is what I have inferred. The PCB would support ISO and ANSI, however at the moment it only supports ANSI, and OP needs 50 people or so, so that he can get the design changed to support ISO.

[naokira]

This is what I have inferred. The PCB would support ISO and ANSI, however at the moment it only supports ANSI, and OP needs 50 people or so, so that he can get the design changed to support ISO.

Must get more ISO!!! If no ISO then I'll probably would not order.

[longweight]

Yes 50 people will need to ask for ISO for it to happen.

[xandr]

I already asked for ISO, so nobody look at me!

Also, I'm in the "no iso = no buy" camp.

[GeorgeK]

Ah right - if I were to buy this I'd definitely want support for ISO and ANSI...

[Dubsgalore]

Let's all just express our support for ISO, and make it happen

[longweight]

Then register your interest

[naokira]

Ah right - if I were to buy this I'd definitely want support for ISO and ANSI...

Ah right - if I were to buy this I'd definitely want support for ISO and ANSI...

You guys are great

[jdcarpe]

sprit is working with BeastMask to get ISO/ANSI support on the same PCB. The design isn't final yet, but I believe we will know something more soon.

[TLSC.wipeOut]

Is it possible for this to be used in conjunction with a plate? or is it only designed to be used for PCB mounted switches?

[MOZ]

Is it possible for this to be used in conjunction with a plate? or is it only designed to be used for PCB mounted switches?

Any PCB can be used with a plate, atleast as far as Cherry MX switches are concerned.

[frogamic]

Can each LED be addressed individually in the firmware?

[TLSC.wipeOut]

Is it possible for this to be used in conjunction with a plate? or is it only designed to be used for PCB mounted switches?

Any PCB can be used with a plate, atleast as far as Cherry MX switches are concerned.

sweet =D

[debt4lyfe]

ANSI / White / 1 PCB

[TLSC.wipeOut]

I guess I'll plan out my 60% build based on this upcoming new PCB xD

[bueller]

I guess I'll plan out my 60% build based on this upcoming new PCB xD

Haha I just ordered 2 plates and some more clears from GON because of this. Was going to get some cut up locally but for $40 including anodising GON is damn hard to beat.

[mashby]

I'm in for three: Blue, White and Black

[TLSC.wipeOut]

I guess I'll plan out my 60% build based on this upcoming new PCB xD

Haha I just ordered 2 plates and some more clears from GON because of this. Was going to get some cut up locally but for $40 including anodising GON is damn hard to beat.

are his plates on his website or did you just PM him for plates? o.0 can't seem to find it on his site...

[MOZ]

http://www.gonskeyboardworks.com/accessaries/17-universal-frameplate-for-60.html

[phatdood9]

Count me in!

Two ANSI, 1 red, 1 white

[TLSC.wipeOut]

http://www.gonskeyboardworks.com/accessaries/17-universal-frameplate-for-60.html

Thanks MOZ! didn't see that o.o lol

[sprit]

sprit is working with BeastMask to get ISO/ANSI support on the same PCB. The design isn't final yet, but I believe we will know something more soon.

      As we know, Basically ISO enter and 1.25x shift support on the PCB is absolutely required.   And the Firmware for sure.
We are working on ANSI+ISO, and now doing finalizing the Release Candidate..
I do Love ISO for myself, just because I have learned some of your languages and got friends there, my fellow Europeans...