This is super cool. The design looks great kin. This might have to be my first full size to build.
Hi kin, can you double check if receive my order yet? I filled the form YESTERDAY before the GB topic open. Not sure, i'll do it again.
Thanks.
Sent from my SM-G965F using Tapatalk
Hi kin, can you double check if receive my order yet? I filled the form YESTERDAY before the GB topic open. Not sure, i'll do it again.
Thanks.
Sent from my SM-G965F using Tapatalk
All are filled in form.
Don't worry.
Debating not paying my rent to jump on this.Hopefully you are not serious.
is it possible to replace those tiny tx circle with my own circle? of course, I have to make it myself...
This board looks amazing and I'm almost certain I'll order one.
Couple of questions (sorry in advance for being a noob, never bought a board off GH or Kin25 before and am new to the mech keyboard game)
1) Which colour is the board featured in the pics Grey or black?
2) On the preorder form, how do I read the 0-4 winkey/winkeyless option?
3) Do I write the kind of layout I want in the comments?
Thanks in advance
Awesome!is it possible to replace those tiny tx circle with my own circle? of course, I have to make it myself...
Sure. You can do.
Entered.
Is it possible to build without the acrylic diffuser and receive a PCB without underside RGB LEDs?
Will this be run again in the future? I'm sad I missed out -_-
Will this be run again in the future? I'm sad I missed out -_-
Me too..
What a bummer I missed this one. Custom 108s are rare. And I do like using them.
it's a good call to change from acrylic to poly.
btw, any chance to get the poly diffuser for TX84SE?
Will this be run again in the future? I'm sad I missed out -_-
I am going to regret not jumping in on this one for a long time. I can't believe I missed it!
Yeah.. Kin sent to proxies few weeks ago as he mentioned above..
Sent from my iPhone using Tapatalk
You should expect the notif from your proxy, not directly from kin I think..
Received mine yesterday. Beautiful board!That looks great! Is this the black ano?
(Attachment Link)
https://goo.gl/forms/WHjr08vAI3KoUuI02
extra preorder form
Received mine yesterday. Beautiful board!That looks great! Is this the black ano?
(Attachment Link)
Surprised they're shipping so fast, I was ready for longer delay.
Excited for my first kustom!
How is the PCB programmed? I filled out the extra order form for a TX180se this morning.Edit: Congrats on kin having his own pcb design. This is refreshing.
How is the PCB programmed? I filled out the extra order form for a TX180se this morning.
How is the PCB programmed? I filled out the extra order form for a TX180se this morning.
Tx108se pcb is 'suo 108L'
It is my first pcb.
Many parts are different from leeku L3.
Program is also different.
How is the PCB programmed? I filled out the extra order form for a TX180se this morning.
Tx108se pcb is 'suo 108L'
It is my first pcb.
Many parts are different from leeku L3.
Program is also different.
Congrats on your first PCB. Is the program available somewhere?
Thanks for the pictures Kin - they look great! Does the black 108se come with the black T and X symbols or the blue ones (I'd prefer the black ones on the black 108 I've ordered)?
https://goo.gl/forms/WHjr08vAI3KoUuI02
extra preorder form
https://goo.gl/forms/WHjr08vAI3KoUuI02
extra preorder form
Hi Kin,
Pls add TX87 if available, I’d like to have one.
Thanks
https://goo.gl/forms/WHjr08vAI3KoUuI02
extra preorder form
I refunded the difference of shipping cost to Austalian, Vietnamese and Singaporean.Thanks Kin. I received it in my pp already !
After finishing shipping from proxy, I will refund to American and European.
I am sorry for long delivery.
Received mine today. Thank you Kin for such a beautiful keyboard.
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Received mine today. Thank you Kin for such a beautiful keyboard.
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Hi Kin!
I just wanted to check to see if you've sent the 108se extras yet (for me it was a black one that was invoiced and paid a couple of weeks ago)?
Kin, can you bundle all 4 of my boards together? The 3 from the antique, extra bags, and this? Hopefully it will save on shipping cost.
Kin, can you bundle all 4 of my boards together? The 3 from the antique, extra bags, and this? Hopefully it will save on shipping cost.
Kin, can you bundle all 4 of my boards together? The 3 from the antique, extra bags, and this? Hopefully it will save on shipping cost.
damn, going hard i see
props to you
Kin, can you bundle all 4 of my boards together? The 3 from the antique, extra bags, and this? Hopefully it will save on shipping cost.
damn, going hard i see
props to you
I collect keyboards, you collect posts. To each, their own. 😂😉
I collect keyboards, you collect posts. To each, their own. 😂😉LMFAO lol holy shet savage af
I asked this before but it I think it got burried under other people's responses so it went unanswered. Are the EU orders still underway? I haven't gotten any notification yet about shipping.
Also ordered in the first round and have yet to receive the board - in the US.
Also ordered in the first round and have yet to receive the board - in the US.
I reached out late last week and popkorn62 said he hadn’t received them. He was a bit more specific when he responded in the extra parts thread or whatever it’s called. I think he said he was expecting them in about a week.
Sent from my iPhone using Tapatalk Pro
Thanks a lot for the update @popkorn62! Any way we can possibly find out if our package is complete or still waiting for pcbs?
Thanks a lot for the update @popkorn62! Any way we can possibly find out if our package is complete or still waiting for pcbs?
I have to open each package to know. I know at least 2 don’t have PCBs. I prefer going thru bags order first because it needs less work lol...
I received an email today that my bag and springs etc were being sent, but it didn't indicate that the 108se was sent... I guess that means they're being sent separately?Based on what was said above, there were only a few boxes with boards opened and since those are messed up, they’ve been bumped to the back of the list and won’t even be looked at until all the other orders are sent out.
Thanks a lot for the update @popkorn62! Any way we can possibly find out if our package is complete or still waiting for pcbs?
I have to open each package to know. I know at least 2 don’t have PCBs. I prefer going thru bags order first because it needs less work lol...
Do we have a ballpark on keyboards starting to go out? Hate to be a wet blanket. I’m just thinking of the time it’s going to take to find out who’s short, the week or two for Kin to get the PCB’s to you, and then the week or 2 for you to get the orders to us. We could be looking at quite a bit of additional time.
I appreciate everything you guys have done and I’m not complaining. I know 300 orders has to be quite an undertaking. Especially when people have placed multiple orders for different things and you have to match them all up. Now, you’re shot items. I can only imagine the logistical nightmare.
Just want to kind of have an idea of the timeframe and I’m only asking publicly because it seems like everyone wants info, any info, so they can be up to day.
So I'm definitely missing something because I'm uncertain to how to program the board. I see the screenshot in the first reply to the post but I don't know what software that is. Anybody that can help me out?
So I'm definitely missing something because I'm uncertain to how to program the board. I see the screenshot in the first reply to the post but I don't know what software that is. Anybody that can help me out?
I forgot to post it on our website but here’s the link to download the software: https://www.dropbox.com/sh/1fnuo5icewma2m5/AADmjumLcfiB0ENMMvXtUl3ua?dl=0
Just arrived today, looks gorgeous, a beautiful beast!
(Attachment Link)
Just arrived today, looks gorgeous, a beautiful beast!
(Attachment Link)
Ok, I'll ask :)). I have downloaded the software. Now what? None of the files I try to open will actually open, besides the picture of the TX logo. All of the other files ask me to pick a program and none of them work.
Just arrived today, looks gorgeous, a beautiful beast!
(Attachment Link)
Ok, I'll ask :)). I have downloaded the software. Now what? None of the files I try to open will actually open, besides the picture of the TX logo. All of the other files ask me to pick a program and none of them work.
Don't think you meant to ask me - but I'll take a crack at answering. When you download the zip file and extract it, then extract the zip within the first zip, it should create a bunch of files and folders. It looks to me the only exe file to run is called TX_Device.exe
Did you run this file after extracting suo.zip and then extracting the (second) zip file within that?
Yeah the file you run is tx_device (not tx_device.exe.config <- that's some sort of configuration file for tx_device).
What happens when, in tx_device, you click on the "Custom" tab next to the "Light Effect" tab?
Yeah the file you run is tx_device (not tx_device.exe.config <- that's some sort of configuration file for tx_device).
What happens when, in tx_device, you click on the "Custom" tab next to the "Light Effect" tab?
Thanks for the info. It’s blank. There’s nothing I can do unless I import a file.
Sent from my iPhone using Tapatalk Pro
Yeah the file you run is tx_device (not tx_device.exe.config <- that's some sort of configuration file for tx_device).
What happens when, in tx_device, you click on the "Custom" tab next to the "Light Effect" tab?
Thanks for the info. It’s blank. There’s nothing I can do unless I import a file.
Sent from my iPhone using Tapatalk Pro
What kind of file do you think you need to import? Has anyone made any more progress?
Yeah the file you run is tx_device (not tx_device.exe.config <- that's some sort of configuration file for tx_device).
What happens when, in tx_device, you click on the "Custom" tab next to the "Light Effect" tab?
Thanks for the info. It’s blank. There’s nothing I can do unless I import a file.
Sent from my iPhone using Tapatalk Pro
What kind of file do you think you need to import? Has anyone made any more progress?
I’m dead in the water.
Sent from my iPhone using Tapatalk Pro
Yeah the file you run is tx_device (not tx_device.exe.config <- that's some sort of configuration file for tx_device).
What happens when, in tx_device, you click on the "Custom" tab next to the "Light Effect" tab?
Thanks for the info. It’s blank. There’s nothing I can do unless I import a file.
Sent from my iPhone using Tapatalk Pro
What kind of file do you think you need to import? Has anyone made any more progress?
I’m dead in the water.
Sent from my iPhone using Tapatalk Pro
My board shipped out today/tomorrow so I won't be able to experiment until then. If I figure anything out, I'll be sure to post here
Dumb question: Am I supposed to remove the seemingly excess strips of PCB on the top and bottom of the board. No one here has mentioned it and I didn’t seem to have anything in the package noting it either? If so is there any clever trick to doing so? The top piece I feel like I can just snap off but the bottom piece feels more sturdy.
Just arrived today, looks gorgeous, a beautiful beast!
(Attachment Link)
Ok, I'll ask :)). I have downloaded the software. Now what? None of the files I try to open will actually open, besides the picture of the TX logo. All of the other files ask me to pick a program and none of them work.
Don't think you meant to ask me - but I'll take a crack at answering. When you download the zip file and extract it, then extract the zip within the first zip, it should create a bunch of files and folders. It looks to me the only exe file to run is called TX_Device.exe
Did you run this file after extracting suo.zip and then extracting the (second) zip file within that?
Oops...I copied the wrong person, but I think I tried that. Here’s a pic of what happens when I do that. And none of the programs I can pick from are going to work. IE, MS store, notepad, paint, WM player, and word padShow Image(https://uploads.tapatalk-cdn.com/20190318/eebf227356b0aa457efc35b3a47abaac.jpg)
Sent from my iPhone using Tapatalk Pro
I got it. Show Image(https://uploads.tapatalk-cdn.com/20190318/3d19011c28d36aa020b7181986a0b6b8.jpg)
Well....I figured out how to control some of the lighting.
Just arrived today, looks gorgeous, a beautiful beast!
(Attachment Link)
Ok, I'll ask :)). I have downloaded the software. Now what? None of the files I try to open will actually open, besides the picture of the TX logo. All of the other files ask me to pick a program and none of them work.
Don't think you meant to ask me - but I'll take a crack at answering. When you download the zip file and extract it, then extract the zip within the first zip, it should create a bunch of files and folders. It looks to me the only exe file to run is called TX_Device.exe
Did you run this file after extracting suo.zip and then extracting the (second) zip file within that?
Oops...I copied the wrong person, but I think I tried that. Here’s a pic of what happens when I do that. And none of the programs I can pick from are going to work. IE, MS store, notepad, paint, WM player, and word padShow Image(https://uploads.tapatalk-cdn.com/20190318/eebf227356b0aa457efc35b3a47abaac.jpg)
Sent from my iPhone using Tapatalk Pro
I got it. Show Image(https://uploads.tapatalk-cdn.com/20190318/3d19011c28d36aa020b7181986a0b6b8.jpg)
Well....I figured out how to control some of the lighting.Show Image(https://uploads.tapatalk-cdn.com/20190328/68363b2bfa2dd8ecc6298bbdc266e8b4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190328/53a63c14a74b42d83559ee516a7f6fc7.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190328/f8b58f06ee977faac579d88d7651321c.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190328/ac21984df9c0efa2433bd0b6d7d13689.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190328/73be3d61cd27e62a46c7741b0b8f2140.jpg)
Soldered my board this evening, and booted up the TX program. I was able to program individual keys without having to flash the keyboard.
This is beyond science
Was wondering if anyone could help me out with a question:I not sure if I understand it correctly but there is supposed to be a gap between the PCB and the plate. The plate and PCB don't sit flush meaning that they don't touch each other. The switch is fit in a way that only the top stays above the plate while the bottom housing sits between the plate and the PCB with the metal pins going into the holes of the PCB
I've screwed in all my stabilizers and it feels like the plate doesn't flush with the PCB and this feels wrong. Like the plate hovers above the PCB making it really weird to pop in the switches. What am I doing wrong? I'm sure the stabilizers are mounted correctly.
The plus or T LED on the PCB is flashing like crazy, I've made a film of it here:
Anyone know what to do? I've treated the pcb with the utmost delicacy.
Just arrived today, looks gorgeous, a beautiful beast!
(Attachment Link)
Ok, I'll ask :)). I have downloaded the software. Now what? None of the files I try to open will actually open, besides the picture of the TX logo. All of the other files ask me to pick a program and none of them work.
Don't think you meant to ask me - but I'll take a crack at answering. When you download the zip file and extract it, then extract the zip within the first zip, it should create a bunch of files and folders. It looks to me the only exe file to run is called TX_Device.exe
Did you run this file after extracting suo.zip and then extracting the (second) zip file within that?
Oops...I copied the wrong person, but I think I tried that. Here’s a pic of what happens when I do that. And none of the programs I can pick from are going to work. IE, MS store, notepad, paint, WM player, and word padShow Image(https://uploads.tapatalk-cdn.com/20190318/eebf227356b0aa457efc35b3a47abaac.jpg)
Sent from my iPhone using Tapatalk Pro
I got it. Show Image(https://uploads.tapatalk-cdn.com/20190318/3d19011c28d36aa020b7181986a0b6b8.jpg)
Well....I figured out how to control some of the lighting.Show Image(https://uploads.tapatalk-cdn.com/20190328/68363b2bfa2dd8ecc6298bbdc266e8b4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190328/53a63c14a74b42d83559ee516a7f6fc7.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190328/f8b58f06ee977faac579d88d7651321c.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190328/ac21984df9c0efa2433bd0b6d7d13689.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190328/73be3d61cd27e62a46c7741b0b8f2140.jpg)
So I updated the Suo software with either FT001.cyacd or FT001-0915.cyacd and the board starting acting totally crazy. The Suo program no longer recognizes it and the board is spouting out keyboard inputs, alt-shortcuts messing everything completely up forcing me to unplug it. Video here: index=1&list=WL .
The board was working fine until this except I couldn't program it. Is there a way to flash/reset the board somehow?
So I updated the Suo software with either FT001.cyacd or FT001-0915.cyacd and the board starting acting totally crazy. The Suo program no longer recognizes it and the board is spouting out keyboard inputs, alt-shortcuts messing everything completely up forcing me to unplug it. Video here: index=1&list=WL .
The board was working fine until this except I couldn't program it. Is there a way to flash/reset the board somehow?
Sorry it was my mistake.
It is wrong firmware.
I will let you know the solution, plz send email to me. 225ozzy@naver.com
So I updated the Suo software with either FT001.cyacd or FT001-0915.cyacd and the board starting acting totally crazy. The Suo program no longer recognizes it and the board is spouting out keyboard inputs, alt-shortcuts messing everything completely up forcing me to unplug it. Video here: index=1&list=WL .
The board was working fine until this except I couldn't program it. Is there a way to flash/reset the board somehow?
Sorry it was my mistake.
It is wrong firmware.
I will let you know the solution, plz send email to me. 225ozzy@naver.com
This fixed it! Thank you!
It took me a while to figure this out, but if anyone doesn't know, here's a link on how to get your VID/HID: https://www.synology.com/en-us/knowledgebase/DSM/tutorial/Compatibility_Peripherals/How_do_I_check_the_PID_VID_of_my_USB_device
Has anyone been able to get the tx108 software to work? I have version 1.7.0 (no idea where to find a more up to date version).
If I follow Kin's instructions from earlier in this thread it doesn't do anything, I can't bring up any layout. I can't even control any lighting beyond the logo.
Help please Kin/popkorn..? Thanks!
Any update on the suo108 firmware/program yet?
Keyboard works and I love it but eager to tweak some stuffs :3
Any update on the suo108 firmware/program yet?
Keyboard works and I love it but eager to tweak some stuffs :3
Are you able to change the lighting scheme or anything like that on yours?
Any update on the suo108 firmware/program yet?
Keyboard works and I love it but eager to tweak some stuffs :3
Are you able to change the lighting scheme or anything like that on yours?
I tried loading 1.7 but am getting a blank screen with no keyboard layout after choossing suo108 like popkorn had in her picture.
1.8 wouldn't load at all, and also crashed my mouse somehow.
After restarting I loaded 1.7 again, no layout but I was able to change the lighting scheme and change the logo colors, so can work with this for now I guess.
Thankfully the board is fullsize so pretty much most of the keys I need are covered, but I would like to program the 4 macro keys and some other binds!
also I am using windows 8
Hi Kin
I'm really keen to start using my tx108se! Do you have an estimate as to when the updated software/firmware will be available?
Thanks!
P.
Has anyone been able to get the tx108 software to work? I have version 1.7.0 (no idea where to find a more up to date version).
If I follow Kin's instructions from earlier in this thread it doesn't do anything, I can't bring up any layout. I can't even control any lighting beyond the logo.
Help please Kin/popkorn..? Thanks!
I am testing new version firmware and program.
I will release them soon.
Thanks for the heads up Capsy. I'll have a look later and see how it's working on my end.
Yeah well kin would have to look into it given that he's moving to suo PCBs for all his boards.Thanks for the heads up Capsy. I'll have a look later and see how it's working on my end.
The TX V2.2 TX_Device application does not open for me either.
A new version of 2.2 was just released today and...
...it works!
I only tried a single key remap and lighting change, but both worked flawlessly!
https://www.dropbox.com/s/1d5hr8b4e9fcz4i/TX_V2.2.rar?dl=0
Did you figure out the key to go to the FN layer? The only thing that I couldn't figure out yesterday in the software.
Sent from my Pixel 2 XL using Tapatalk