Author Topic: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping  (Read 41437 times)

0 Members and 2 Guests are viewing this topic.

Offline voxkey

  • Posts: 163
  • Location: New Jersey
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #200 on: Wed, 30 January 2019, 19:04:21 »
On the hunt for a Chiwi60, preferably in gray, but also considering silver or white. Send me a PM if you have one up for grabs.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #201 on: Thu, 31 January 2019, 02:28:07 »
What happened to the website?

The Doyu shop displays some broken page with leather tools on the header image now:

https://shopkey.doyustudio.com/
Hi,
We're moving hosting to GCP but engineer ****ed up with database.
I've fixed it and the site, work now.
But we changed the theme, lot of image/text need to be replaced.
We're working on the new contents now :)

Speed is because of I turned cache server off when I'm testing web engine speed.
I'm working on how to make it faster even without cache server.

Offline evyd13

  • Posts: 304
  • Location: The Netherlands
  • You can call me Evy ^.^
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #202 on: Thu, 31 January 2019, 02:45:47 »
Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More
Show Image

More
Show Image

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

No answer to this sennin?

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #203 on: Thu, 31 January 2019, 02:46:57 »
Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More
Show Image

More
Show Image

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

Hi,
I measured again.
Distance between switches is correct.
What's your's PCB's switch spaces @@?

Offline evyd13

  • Posts: 304
  • Location: The Netherlands
  • You can call me Evy ^.^
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #204 on: Thu, 31 January 2019, 03:41:12 »
Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More
Show Image

More
Show Image

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

Hi,
I measured again.
Distance between switches is correct.
What's your's PCB's switch spaces @@?
Probably not exactly 19.05mm. It's a pcb from you (DO60) so I think you would know.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #205 on: Thu, 31 January 2019, 05:04:23 »
Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More
Show Image

More
Show Image

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

Hi,
I measured again.
Distance between switches is correct.
What's your's PCB's switch spaces @@?
Probably not exactly 19.05mm. It's a pcb from you (DO60) so I think you would know.

Strange, it should fit.
The pic is back space?
I can see it very clear, could you give me more pic so I can see which position goes wrong?

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #206 on: Thu, 31 January 2019, 05:05:55 »
Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More
Show Image

More
Show Image

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

No answer to this sennin?
sorry, it has to take a while to check this, can't do a quick reply.

Offline evyd13

  • Posts: 304
  • Location: The Netherlands
  • You can call me Evy ^.^
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #207 on: Fri, 01 February 2019, 03:33:48 »
Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More
Show Image

More
Show Image

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

No answer to this sennin?
sorry, it has to take a while to check this, can't do a quick reply.

I took some more pictures: https://imgur.com/a/zMegAo5

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #208 on: Sat, 02 February 2019, 02:33:23 »
Only back space position has issue?
If there's only backspace.
Could you measure the distance of switch between the key has issue and the one of it's left?
Measure both PCB and plate.
it should be 19.05, see which one is not 19.05, should able to spot the issue.

Offline evyd13

  • Posts: 304
  • Location: The Netherlands
  • You can call me Evy ^.^
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #209 on: Sat, 02 February 2019, 09:50:20 »
Only back space position has issue?
If there's only backspace.
Could you measure the distance of switch between the key has issue and the one of it's left?
Measure both PCB and plate.
it should be 19.05, see which one is not 19.05, should able to spot the issue.

The battery of my digital caliper is dead right now, so I did some testing with GMK keycaps. As you can see the gap between 0 and - is bigger than the other gaps, which means that the two keys are off. You can also see that the tab key is off, which I also had problems with. I have not tested any other keys. The switches used are new PCB mounted Gateron Blacks.

212029-0

212031-1

Offline kiwi99

  • that's a gnarly dookie
  • Posts: 747
  • Location: Penticton, BC
  • authentic church of halverson member
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #210 on: Tue, 12 February 2019, 18:20:24 »
yea the backspace 1+1u switch holes are off. they measure around 19.2mm give or take I just tried building a custom board with a do60 and found this issue as well so I think I can confirm maartenwut that its the pcb, I'll try to get some pictures. sorta disappointed since I lasered some stuff to use the do60s I had lol. :'(

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #211 on: Wed, 13 February 2019, 04:18:45 »
yea the backspace 1+1u switch holes are off. they measure around 19.2mm give or take I just tried building a custom board with a do60 and found this issue as well so I think I can confirm maartenwut that its the pcb, I'll try to get some pictures. sorta disappointed since I lasered some stuff to use the do60s I had lol. :'(
Hi,
Yes I just confirmed that some of switches are a little off.
Some plates might not work.

could you send us a mail/msg?
see what we can do for that.