What layouts will be supported ?You can check out the plates on the order form
That question came up in the IC thread but wasn't ansered yet. :eek: :eek:
What layouts will be supported ?You can check out the plates on the order form
That question came up in the IC thread but wasn't ansered yet. :eek: :eek:
Which shade of grey and pink?You can check out the colors on the order form
Just a few question.
-Is $40 for an additional aluminum plate correct? I just wanted to make sure.
-Will we be able to choose the color of aluminum plates/additional plates?
-Can we choose the layout for the additional plates? Or will it be based on the default?
I didn’t see those options, but wanted to see if it’s a possibility.
Just a few question.
-Is $40 for an additional aluminum plate correct? I just wanted to make sure.
-Will we be able to choose the color of aluminum plates/additional plates?
-Can we choose the layout for the additional plates? Or will it be based on the default?
I didn’t see those options, but wanted to see if it’s a possibility.
- The price for an aluminum/brass plate is the same
- The color of the aluminum plate will be the same as the board. If you want something different please message me on Discord. (Please do not ask for a color outside the GB colors)
- Yes I added in the layouts for additional plates, sorry for missing this
Any estimate on shipping costs to Europe/Germany?
i know this is fcfs but will the invoice be after a certain point since there is different prices for different board amounts?
Which shade of grey and pink?You can check out the colors on the order form
Which shade of grey and pink?You can check out the colors on the order form
That's a terrible picture though.
Is it B or E? https://geekhack.org/index.php?action=dlattach;topic=94750.0;attach=192784;image
Would this fit Alps 64? Probably not but I'm curious
Added a new color to celebrate hitting the 25 MOQ. Feel free to message me if you would like to switch to this color. There will be 1 new color revealed if we hit the 50 MOQ!
Thanks for supporting this buy!
Added a new color to celebrate hitting the 25 MOQ. Feel free to message me if you would like to switch to this color. There will be 1 new color revealed if we hit the 50 MOQ!
Thanks for supporting this buy!
Is navy the same as D in this picture? https://geekhack.org/index.php?action=dlattach;topic=94750.0;attach=192784;image
Added a new color to celebrate hitting the 25 MOQ. Feel free to message me if you would like to switch to this color. There will be 1 new color revealed if we hit the 50 MOQ!
Thanks for supporting this buy!
Is navy the same as D in this picture? https://geekhack.org/index.php?action=dlattach;topic=94750.0;attach=192784;image
No, darker, I don't remember the color but it's in the form.
will it use 6061 aluminum?
the curve is quite similar to Koala, love it, but hard to decide the color
Added a new color to celebrate hitting the 25 MOQ. Feel free to message me if you would like to switch to this color. There will be 1 new color revealed if we hit the 50 MOQ!
Thanks for supporting this buy!
Is navy the same as D in this picture? https://geekhack.org/index.php?action=dlattach;topic=94750.0;attach=192784;image
No, darker, I don't remember the color but it's in the form.
will the champagne color be available?
will it use 6061 aluminum?the curve is quite similar to Koala, love it, but hard to decide the colorAdded a new color to celebrate hitting the 25 MOQ. Feel free to message me if you would like to switch to this color. There will be 1 new color revealed if we hit the 50 MOQ!
Thanks for supporting this buy!
Is navy the same as D in this picture? https://geekhack.org/index.php?action=dlattach;topic=94750.0;attach=192784;image
No, darker, I don't remember the color but it's in the form.
will the champagne color be available?
1. It will use 6063 Aluminum
2. My favorite colors are the Red and Silver
3. There will be another color released if we hit 50 orders. ;) ;) ;) ;) ;)
will it use 6061 aluminum?the curve is quite similar to Koala, love it, but hard to decide the colorAdded a new color to celebrate hitting the 25 MOQ. Feel free to message me if you would like to switch to this color. There will be 1 new color revealed if we hit the 50 MOQ!
Thanks for supporting this buy!
Is navy the same as D in this picture? https://geekhack.org/index.php?action=dlattach;topic=94750.0;attach=192784;image
No, darker, I don't remember the color but it's in the form.
will the champagne color be available?
1. It will use 6063 Aluminum
2. My favorite colors are the Red and Silver
3. There will be another color released if we hit 50 orders. ;) ;) ;) ;) ;)
then I will wait until 50 then decide the color and join!
will it use 6061 aluminum?the curve is quite similar to Koala, love it, but hard to decide the colorAdded a new color to celebrate hitting the 25 MOQ. Feel free to message me if you would like to switch to this color. There will be 1 new color revealed if we hit the 50 MOQ!
Thanks for supporting this buy!
Is navy the same as D in this picture? https://geekhack.org/index.php?action=dlattach;topic=94750.0;attach=192784;image
No, darker, I don't remember the color but it's in the form.
will the champagne color be available?
1. It will use 6063 Aluminum
2. My favorite colors are the Red and Silver
3. There will be another color released if we hit 50 orders. ;) ;) ;) ;) ;)
then I will wait until 50 then decide the color and join!
You can edit your order at any time before I submit to the factory! No worries about ordering now or later :). There are currently 45 orders so I think the new color will be revealed tomorrow!
Hi All,
I am releasing the final color since we have hit 50 MOQ. Feel free to message me if you would like to change your color to this!
:eek:Show Image(https://i.imgur.com/y8q7YqO.png)
The final color will be Blue Gray.
Enjoy! Thanks for joining and I hope we hit the 75 MOQ :).
Hi All,
I am releasing the final color since we have hit 50 MOQ. Feel free to message me if you would like to change your color to this!
:eek:Show Image(https://i.imgur.com/y8q7YqO.png)
The final color will be Blue Gray.
Enjoy! Thanks for joining and I hope we hit the 75 MOQ :).
any sample shade of this color?
Hi All,
I am releasing the final color since we have hit 50 MOQ. Feel free to message me if you would like to change your color to this!
:eek:Show Image(https://i.imgur.com/y8q7YqO.png)
The final color will be Blue Gray.
Enjoy! Thanks for joining and I hope we hit the 75 MOQ :).
any sample shade of this color?
Not at the moment but I will have one in the next few weeks ;D
Any news about the timeframe? I'm tempted to join but I'd like to hear an estimated production time line, something like: production should be finished within 10-12 weeks. This board looks really good and I like the existence of the prototype, therefore I hope that you have experience with the factory so that you can give us some info about that. Seeing a timeframe and a well planned GB makes me more comfortable to join so I hope you can give us some estimations
Cheers
So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
I'm not willing to go through all that but I am very intrigued by the pantone.So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
I need to see the shade sample before making decision.
Stay in silver now and will re-anodize it after receiving if 8181c looks good
I'm not willing to go through all that but I am very intrigued by the pantone.So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
I need to see the shade sample before making decision.
Stay in silver now and will re-anodize it after receiving if 8181c looks good
Sent from my VS996 using Tapatalk
Op said a couple weeks. This is going to hit 75 within a few days and have to be paid within 2 days after thatI'm not willing to go through all that but I am very intrigued by the pantone.So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
I need to see the shade sample before making decision.
Stay in silver now and will re-anodize it after receiving if 8181c looks good
Sent from my VS996 using Tapatalk
I think he meant he would wait and see the sample before swapping
Also the runner said blue grey sample soon( on a actual keyboard iirc)
Op said a couple weeks. This is going to hit 75 within a few days and have to be paid within 2 days after thatI'm not willing to go through all that but I am very intrigued by the pantone.So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
I need to see the shade sample before making decision.
Stay in silver now and will re-anodize it after receiving if 8181c looks good
Sent from my VS996 using Tapatalk
I think he meant he would wait and see the sample before swapping
Also the runner said blue grey sample soon( on a actual keyboard iirc)
Sent from my VS996 using Tapatalk
I do not want to hold up the gb at all.Op said a couple weeks. This is going to hit 75 within a few days and have to be paid within 2 days after thatI'm not willing to go through all that but I am very intrigued by the pantone.So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
I need to see the shade sample before making decision.
Stay in silver now and will re-anodize it after receiving if 8181c looks good
Sent from my VS996 using Tapatalk
I think he meant he would wait and see the sample before swapping
Also the runner said blue grey sample soon( on a actual keyboard iirc)
Sent from my VS996 using Tapatalk
If people are really on the fence about whether they want the blue grey I can hold the order submission until I receive the sample or pictures of the sample. It will delay the entire GB, though.
I'm not willing to go through all that but I am very intrigued by the pantone.So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
I need to see the shade sample before making decision.
Stay in silver now and will re-anodize it after receiving if 8181c looks good
Sent from my VS996 using Tapatalk
I think he meant he would wait and see the sample before swapping :p
Also the runner said blue grey sample soon( on a actual keyboard iirc)
I'm not willing to go through all that but I am very intrigued by the pantone.So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
I need to see the shade sample before making decision.
Stay in silver now and will re-anodize it after receiving if 8181c looks good
Sent from my VS996 using Tapatalk
I think he meant he would wait and see the sample before swapping :p
Also the runner said blue grey sample soon( on a actual keyboard iirc)
yes exactly.
My concern is that the Pantone color is the standard for printed stuffs, not metal processing.
If you asked a metal factory for a printed color, they can only give you something similar but not exact same.
The color card I can find in the anodizing factory is indeed made by metal like this: http://img.alu.cn/big/tradesmallpic/20113/11030816462363.jpg
It is a totally different color system than Pantone colors.
I'm not willing to go through all that but I am very intrigued by the pantone.So what's everyones opinion on the 8181c as far as keycap compatibility? Is it neutral enough for a wide range of caps?
Sent from my VS996 using Tapatalk
I need to see the shade sample before making decision.
Stay in silver now and will re-anodize it after receiving if 8181c looks good
Sent from my VS996 using Tapatalk
I think he meant he would wait and see the sample before swapping :p
Also the runner said blue grey sample soon( on a actual keyboard iirc)
yes exactly.
My concern is that the Pantone color is the standard for printed stuffs, not metal processing.
If you asked a metal factory for a printed color, they can only give you something similar but not exact same.
The color card I can find in the anodizing factory is indeed made by metal like this: http://img.alu.cn/big/tradesmallpic/20113/11030816462363.jpg
It is a totally different color system than Pantone colors.
Hi,
The pantones I select are specifically from the C series that are designated for "Metallics Coated". Please do not spread misinformation in my GB thread. I would say that the colors I choose are pretty accurately represented in the final product.
Thanks
How is the plate mounted? Top? Bottom?Sandwich if I'm not mistaken
How is the plate mounted? Top? Bottom?Sandwich if I'm not mistaken
Sent from my VS996 using Tapatalk
Just joined since #68 was finally taken :thumb:Thats dedication haha
Just joined since #68 was finally taken :thumb:Thats dedication haha
Sent from my VS996 using Tapatalk
Yea that would really suck hahaJust joined since #68 was finally taken :thumb:Thats dedication haha
Sent from my VS996 using Tapatalk
Just hoping that people would pay for their spots, or them not paying would not affect the number LOL
Just joined since #68 was finally taken :thumb:I dont wanna ruin your mood, but if you aiming for no.69 you are actually no.68 now. Cmiiw
Just joined since #68 was finally taken :thumb:I dont wanna ruin your mood, but if you aiming for no.69 you are actually no.68 now. Cmiiw
Just joined since #68 was finally taken :thumb:I dont wanna ruin your mood, but if you aiming for no.69 you are actually no.68 now. Cmiiw
oh ****, time to remove my order...
Just joined since #68 was finally taken :thumb:I dont wanna ruin your mood, but if you aiming for no.69 you are actually no.68 now. Cmiiw
oh ****, time to remove my order...
Just curious, do numbers get pushed up if people don't pay?
Just joined since #68 was finally taken :thumb:I dont wanna ruin your mood, but if you aiming for no.69 you are actually no.68 now. Cmiiw
oh ****, time to remove my order...
Just curious, do numbers get pushed up if people don't pay?
No
Anyway, whoever that's #69 please swap with me thanks.
Anyway, whoever that's #69 please swap with me thanks.Its a number. chill
I want to join, but only if I get number 3, can you change this please!
I want to join, but only if I get number 3, can you change this please!
The numbers are just the numbers in the sheet -1. So all numbers up to 69 are taken.
Sat on this too long, even had the form open, went to bed thinking I'd decide in the morning. Congrats though, it's a nice looking board.Message the creator and ask to be put on a waitlist, there’s every possibility that someone doesn’t pay and you get bumped. Has happened to me twice in GB’s. Good luck
All invoices have been sent out. Feel free to contact me with any corrections.
- You will have 48 hours to pay your invoice before I cancel it.
- If all 75 fail to pay, I'll reopen the GB to fill the missing spots.
- If you will an empty spot you will be invoiced immediately and you will take the # for that spot.
- If we do not end up with 75 total orders, the price will not be affected. The price is set to $250.
- The order will be submitted to the manufacturer on May 2nd.
Thanks for joining! I'll be posting updates in this thread as I have more information :).
Sat on this too long, even had the form open, went to bed thinking I'd decide in the morning. Congrats though, it's a nice looking board.Message the creator and ask to be put on a waitlist, there’s every possibility that someone doesn’t pay and you get bumped. Has happened to me twice in GB’s. Good luck
Nice one! CongratsSat on this too long, even had the form open, went to bed thinking I'd decide in the morning. Congrats though, it's a nice looking board.Message the creator and ask to be put on a waitlist, there’s every possibility that someone doesn’t pay and you get bumped. Has happened to me twice in GB’s. Good luck
Thanks for the suggestion, did that and got a spot. Paid for as well!
Base on the pictures of the plate, am I right to say that if my plan is to use a DZ60 PCB with the below layout, I'll need to grab the DZ60 plate from KBD?Show Image(https://i.imgur.com/UCatV8l.jpg)
Base on the pictures of the plate, am I right to say that if my plan is to use a DZ60 PCB with the below layout, I'll need to grab the DZ60 plate from KBD?Show Image(https://i.imgur.com/UCatV8l.jpg)
U can't use the dz60 plate. The plate here is different.
Base on the pictures of the plate, am I right to say that if my plan is to use a DZ60 PCB with the below layout, I'll need to grab the DZ60 plate from KBD?Show Image(https://i.imgur.com/UCatV8l.jpg)
U can't use the dz60 plate. The plate here is different.
I see. So I can use the dz60 plate but basically I'm stuck with the plate layout here?
The plate used for this case is not a standard plate, its bigger and sandwich mount. There wouldnt be the standoffs for a normal 60% plate to use itBase on the pictures of the plate, am I right to say that if my plan is to use a DZ60 PCB with the below layout, I'll need to grab the DZ60 plate from KBD?Show Image(https://i.imgur.com/UCatV8l.jpg)
U can't use the dz60 plate. The plate here is different.
I see. So I can use the dz60 plate but basically I'm stuck with the plate layout here?
Damn, my # changed to 44 now. That's very bad luck in Asian culture lol (signifies death).I would like number 44 actually.
:eek: Wish me luck bois
Hey Once,Damn, my # changed to 44 now. That's very bad luck in Asian culture lol (signifies death).I would like number 44 actually.
:eek: Wish me luck bois
Sent from my VS996 using Tapatalk
Just let me know if you guys plan to swap numbers so I can record it.Yes we would love to swap numbers but keep the same builds if that makes sense
If you guys want to trade with each other that's fine with me ;D. I think it makes the GB more fun for all involved!
Just let me know if you guys plan to swap numbers so I can record it.
If you guys want to trade with each other that's fine with me ;D. I think it makes the GB more fun for all involved!
If you guys want to trade with each other that's fine with me ;D. I think it makes the GB more fun for all involved!
Hi All,
6 open spots for the following numbers.
#3, #28, #29, #30, #34, #36.
You will not be able to transfer into any of these spots for the moment.
Thanks!
Diggin the #3 since its my lucky number, while im sitting at #5. But im happy either way. Hope the person who will claim it willing to swap.
I'm sitting at #54 which isn't a bad number. I'd ideally want #6 as that's my favorite number so #6 if you wanna trade let me know!
I guess geekhack doesn't have like pinging capabilities but Itsundone if you wanna change let me know.
I'm sitting at #54 which isn't a bad number. I'd ideally want #6 as that's my favorite number so #6 if you wanna trade let me know!
I guess geekhack doesn't have like pinging capabilities but Itsundone if you wanna change let me know.
The list is offset by 1 since the header begins on Row 1, so Itsundone is actually #5.
Hi all,
Spot #65 is now up for grabs. Other spots form earlier have been filled.
Thanks
Hi all,
Spot #65 is now up for grabs. Other spots form earlier have been filled.
Thanks
Can I have spot 69?
Would 37 be willing to swap?
30Would 37 be willing to swap?
I would, I'm looking for slot 5 or 55 though. I don't think slot 5 holder is willing to swap, and slot 55 holder is someone over at KBDLabs which poses a problem since I don't speak or understand Korean meaning I'm not sure how to contact them to ask.
edit: Which number do you have?
It seems some people are having difficulty determing their order number from the order check spreadsheet.
If you look, you will see that Row #1 is the HEADER. To get the number for your keyboard, subtract 1. The operation is: weightNumber = rowNumber - 1.
Please let me know if you need help determining the number on your weight. I will be happy to perform the above calculation for you.
Thanks, happy trading.
It seems some people are having difficulty determing their order number from the order check spreadsheet.this is too much to comprehend can you draw out a flow chart with decision trees?
If you look, you will see that Row #1 is the HEADER. To get the number for your keyboard, subtract 1. The operation is: weightNumber = rowNumber - 1.
Please let me know if you need help determining the number on your weight. I will be happy to perform the above calculation for you.
Thanks, happy trading.
It seems some people are having difficulty determing their order number from the order check spreadsheet.this is too much to comprehend can you draw out a flow chart with decision trees?
If you look, you will see that Row #1 is the HEADER. To get the number for your keyboard, subtract 1. The operation is: weightNumber = rowNumber - 1.
Please let me know if you need help determining the number on your weight. I will be happy to perform the above calculation for you.
Thanks, happy trading.
It seems some people are having difficulty determing their order number from the order check spreadsheet.
If you look, you will see that Row #1 is the HEADER. To get the number for your keyboard, subtract 1. The operation is: weightNumber = rowNumber - 1.
Please let me know if you need help determining the number on your weight. I will be happy to perform the above calculation for you.
Thanks, happy trading.
just a thought, stolen from someone else... https://imgur.com/a/vm177Sd
It seems a lot of people have been requesting that I do the calculation so I have added it into the order check spreadsheet. You can see the calculation in the image below for your reference:
I will also post it here for your visibility: =Row() - 1Show Image(https://i.imgur.com/CksUUtx.png)
Thanks
It seems a lot of people have been requesting that I do the calculation so I have added it into the order check spreadsheet. You can see the calculation in the image below for your reference:
I will also post it here for your visibility: =Row() - 1Show Image(https://i.imgur.com/CksUUtx.png)
Thanks
imagine thinking you are spot #69 :feelsbadman: #70
Hi all,Well that looks awesome.
As promised I have received photos for the Blue Gray sample. I won't be able to get any more photos since the factory is on Holiday for a few days now.Show Image(https://i.imgur.com/X7P6do3.jpg)
Thanks!
Hi all,
As promised I have received photos for the Blue Gray sample. I won't be able to get any more photos since the factory is on Holiday for a few days now.Show Image(https://i.imgur.com/X7P6do3.jpg)
Thanks!
Dang, I went with black. I wish I would have gone with the Blue Grey it looks a lot better than I expected. Oh well. :) I'm just excited to get this board.
Dang, I went with black. I wish I would have gone with the Blue Grey it looks a lot better than I expected. Oh well. :) I'm just excited to get this board.
You might be able to swap he's not submitting until Wednesday. PM him on discord see if that's possible.
Dang, I went with black. I wish I would have gone with the Blue Grey it looks a lot better than I expected. Oh well. :) I'm just excited to get this board.
You might be able to swap he's not submitting until Wednesday. PM him on discord see if that's possible.
I was able to swap!!! YESSSSSSSSSSS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Can't believe I missed this :(
Can't believe I missed this :(
I think there will be extras, I remember reading it somewhere. Then also those who cancelled.
Personally OK with those marks as long as they are on the inside and not visible when the keyboard is assembled.I second this. No point in complaining about slight machining marks if they are inside of the case, outside of sight and feel.
TX60 includes a bag and pcb and it's an in stock item, therefore the comparison is not really fair
Hi All,
I spoke with the factory today regarding the tooling marks inside of the keyboards. They have told me that they will make sure that they do not show up for no additional cost. Production will continue. Sorry to give you all a scare but I just wanted to be transparent with all of the information that I had.
Thanks
Hi All,Nice, thanks for solving this issue in such a fast and good manner
I spoke with the factory today regarding the tooling marks inside of the keyboards. They have told me that they will make sure that they do not show up for no additional cost. Production will continue. Sorry to give you all a scare but I just wanted to be transparent with all of the information that I had.
Thanks
Hi All,
I spoke with the factory today regarding the tooling marks inside of the keyboards. They have told me that they will make sure that they do not show up for no additional cost. Production will continue. Sorry to give you all a scare but I just wanted to be transparent with all of the information that I had.
Thanks
Do you have Pantone color codes or something more "neutral" to get a better sense of what the final colors will be? I got the gray one and I'm just trying to see what else might match with it.
Do you have Pantone color codes or something more "neutral" to get a better sense of what the final colors will be? I got the gray one and I'm just trying to see what else might match with it.
Do you have Pantone color codes or something more "neutral" to get a better sense of what the final colors will be? I got the gray one and I'm just trying to see what else might match with it.
I'm kinda curious, what doesn't match with gray? :p :p :p
Hi All,
Some new. The manufacturing requested I bring the order count up to 100 in order to allow a mold to be created for the raw aluminum blocks before machining. This will improve the quality of the board overall and reducs the chance of imperfections appearing during anodizing.
That being said, I have 23 extra boards to sell so if you know anyone who is interested and wasn't able to get a spot, these are up for sale. The color is not locked in but the layouts are. The remaining keyboards are:
10 WKL
8 HHKB
5 Standard
Please message me if you are interested in getting one of the remaining 23 spots.
Thanks All!
Hi All,
Some new. The manufacturing requested I bring the order count up to 100 in order to allow a mold to be created for the raw aluminum blocks before machining. This will improve the quality of the board overall and reducs the chance of imperfections appearing during anodizing.
That being said, I have 23 extra boards to sell so if you know anyone who is interested and wasn't able to get a spot, these are up for sale. The color is not locked in but the layouts are. The remaining keyboards are:
10 WKL
8 HHKB
5 Standard
Please message me if you are interested in getting one of the remaining 23 spots.
Thanks All!
Can us GB buyers buy an additional one and not pay additional shipping?
Due to the current delay, will there be an option for refunds of people dont want to wait?
Sent from my VS996 using Tapatalk
He literally calls out that the manufacturer requested 100 so they can do a new mold... You think they are doing the first 75 in the old mold and the other 25 in the New? That makes no senseDue to the current delay, will there be an option for refunds of people dont want to wait?
Sent from my VS996 using Tapatalk
What delay? The group buy runner didn't say anything about a delay. Just that he has extra boards to sell.
He literally calls out that the manufacturer requested 100 so they can do a new mold... You think they are doing the first 75 in the old mold and the other 25 in the New? That makes no senseDue to the current delay, will there be an option for refunds of people dont want to wait?
Sent from my VS996 using Tapatalk
What delay? The group buy runner didn't say anything about a delay. Just that he has extra boards to sell.
Sent from my VS996 using Tapatalk
Hi All,I want to personally apologise. I was in no way trying to talk bad about you. I was Just nervous that there was a delay. I even said several times on discord about how amazing youve been with communication and that it has been issues with the manufacturer. So again I'm sorry for the butts I hurt.
It seems there has been a misunderstanding. There is no delay. I fronted the money for the additional 23 keyboards to improve the quality and increase the speed of the GB overall. Obviously I am selling them but it will not delay the GB at all.
Thanks
I'm making an alps plate but for standard with an AEK bottom row.
I've already done some of the work making this so as long as the man Quan's okay with it we can do it.
Here's a picture of what I've got so far.Show Image(https://i.imgur.com/0kjcKnd.png)
If there's more interest I could add MX stabilizer holes.
I don't know Geekhack ettiquate is it incorrect to discuss this here? Apologies quan if I've overstepped.
EDIT: Added spacebar MX cutouts as i'm using a spacebar with MX stabilizers.
So I've filled out the form for one of the extras, but have not received an invoice for it yet. Is that coming later, or should I have expected it already?
Sent from my SM-G965U using Tapatalk
You're right...I'm dumb. I found the invoice and made the payment. Thanks for replying! Everything seems to be set.So I've filled out the form for one of the extras, but have not received an invoice for it yet. Is that coming later, or should I have expected it already?
Sent from my SM-G965U using Tapatalk
All invoices for extras have been sent out. I see that I sent one out for you specifically as well. Contact me via PM or Discord so I can double check that the email I received for you was correct.
Is there still spots left? Taking a look at the spreadsheet and not sure if it's updated or not.
I've already done some of the work making this so as long as the man Quan's okay with it we can do it.
Here's a picture of what I've got so far.Show Image(https://i.imgur.com/0kjcKnd.png)
If there's more interest I could add MX stabilizer holes.
I don't know Geekhack ettiquate is it incorrect to discuss this here? Apologies quan if I've overstepped.
EDIT: Added spacebar MX cutouts as i'm using a spacebar with MX stabilizers.
I would be down to purchase a Alps plate as well so count me in.
Still any available?
Wh0000p that's a fast reply :P Hot damn.Still any available?
I'm not the man himself but the form is still open and the google doc still says there's spots so i'd say go for it?
Wh0000p that's a fast reply :P Hot damn.Still any available?
I'm not the man himself but the form is still open and the google doc still says there's spots so i'd say go for it?
Hello fellow QXP friends I mentioned above i was working on an alps specific plate just wanted to give an update on that.
I've got a prototype in which you can see below. Upon immediate inspection i'm really happy with it the alps clip in great and it looks fantastic.Show Image(https://i.imgur.com/qgomnom.jpg)
The next step will be confirming all the switches are in the right location and hopefully, Quan willing, i'll get a chance to check whether it properly mates with the case prototype.
At this point it's more of an issue of figuring out what layout a majority/enough people would be interested in to make them.
Btw: is there any update about production? ;D Is the cnc work already done or did it already move to the anodizing company? :D
Quant posted a teaser pic on the discord a few days ago. Things moving along smoothly ;)
Quant posted a teaser pic on the discord a few days ago. Things moving along smoothly ;)
Good to hear :) Which discord do I have to join or can someone reupload the pictures here? ;D
Hi All,
Latest update: CNC is completed for all of the boards. They are being prepared with a final step before they go to anodizing. I'll keep you posted when I have more info. There are still a few boards unclaimed so check the Order Check link in the OP. Rows in GRAY are boards that are available.
Thanks
Filled in for a spot! This will be my first WKL 60%. When is this estimated to ship? :)
Filled in for a spot! This will be my first WKL 60%. When is this estimated to ship? :)
CNC done and waiting for ano. So probably pretty soon.
Filled in for a spot! This will be my first WKL 60%. When is this estimated to ship? :)
CNC done and waiting for ano. So probably pretty soon.
oh cool. I'm guessing anodizing goes pretty fast? I wonder if Quant mentioned any timeline for this. Maybe like august?
At this point it's more of an issue of figuring out what layout a majority/enough people would be interested in to make them.
It's been almost a month since an update and production is scheduled to have been completed 4 days ago any chance we can get some info as to the current status of the buy?
Can't freaking wait.
It's been almost a month since an update and production is scheduled to have been completed 4 days ago any chance we can get some info as to the current status of the buy?
Can't freaking wait.
Cases are in polishing. That’s where they have been for the last 3 weeks, this part takes a while since it’s a slow manual process. After polishing is anodizing.
So then we are behind schedule at least a couple weeks. These are updates that would have been good to know before the expected ship date already passed.It's been almost a month since an update and production is scheduled to have been completed 4 days ago any chance we can get some info as to the current status of the buy?
Can't freaking wait.
Cases are in polishing. That’s where they have been for the last 3 weeks, this part takes a while since it’s a slow manual process. After polishing is anodizing.
Sent from my VS996 using Tapatalk
I never enter a GB expecting it to run on time, once I’m in I just put it out of my mind and get on with my life playing with the keebs I already have and then, surprise, shipping notice! Feels more zen that way
Theres a difference between expecting on time and expecting updates when someone has over 10 grand in other peoples money... I dont think that's too much to ask, but sorry for voicing my opinionSo then we are behind schedule at least a couple weeks. These are updates that would have been good to know before the expected ship date already passed.It's been almost a month since an update and production is scheduled to have been completed 4 days ago any chance we can get some info as to the current status of the buy?
Can't freaking wait.
Cases are in polishing. That’s where they have been for the last 3 weeks, this part takes a while since it’s a slow manual process. After polishing is anodizing.
Sent from my VS996 using Tapatalk
It takes how long it takes. He can’t make the factory hand polish faster. If you wanted a sooner update did you try contacting him?
Either way, I don’t mind waiting for quality. Given how nice the kyuus I got turned out, I’m very excited for these. I don’t think anyone will be disappointed, but yes, because the insides are being polished to avoid machining marks on the inside, the production time is longer than originally anticipated.I never enter a GB expecting it to run on time, once I’m in I just put it out of my mind and get on with my life playing with the keebs I already have and then, surprise, shipping notice! Feels more zen that way
^this
So then we are behind schedule at least a couple weeks. These are updates that would have been good to know before the expected ship date already passed.It's been almost a month since an update and production is scheduled to have been completed 4 days ago any chance we can get some info as to the current status of the buy?
Can't freaking wait.
Cases are in polishing. That’s where they have been for the last 3 weeks, this part takes a while since it’s a slow manual process. After polishing is anodizing.
Sent from my VS996 using Tapatalk
It takes how long it takes. He can’t make the factory hand polish faster. If you wanted a sooner update did you try contacting him?
Either way, I don’t mind waiting for quality. Given how nice the kyuus I got turned out, I’m very excited for these. I don’t think anyone will be disappointed, but yes, because the insides are being polished to avoid machining marks on the inside, the production time is longer than originally anticipated.I never enter a GB expecting it to run on time, once I’m in I just put it out of my mind and get on with my life playing with the keebs I already have and then, surprise, shipping notice! Feels more zen that way
^this
Theres a difference between expecting on time and expecting updates when someone has over 10 grand in other peoples money... I dont think that's too much to ask, but sorry for voicing my opinionSo then we are behind schedule at least a couple weeks. These are updates that would have been good to know before the expected ship date already passed.It's been almost a month since an update and production is scheduled to have been completed 4 days ago any chance we can get some info as to the current status of the buy?
Can't freaking wait.
Cases are in polishing. That’s where they have been for the last 3 weeks, this part takes a while since it’s a slow manual process. After polishing is anodizing.
Sent from my VS996 using Tapatalk
It takes how long it takes. He can’t make the factory hand polish faster. If you wanted a sooner update did you try contacting him?
Either way, I don’t mind waiting for quality. Given how nice the kyuus I got turned out, I’m very excited for these. I don’t think anyone will be disappointed, but yes, because the insides are being polished to avoid machining marks on the inside, the production time is longer than originally anticipated.I never enter a GB expecting it to run on time, once I’m in I just put it out of my mind and get on with my life playing with the keebs I already have and then, surprise, shipping notice! Feels more zen that way
^this
Sent from my VS996 using Tapatalk
Is this the blue grey? Cause that looks amazing!Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476781955958964244/BB4A7185-BE5D-46B3-8114-49490626FFF4.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476772101051908097/109A76E6-59F0-4B8E-97E4-B956888D2DE6.jpg)
yeah this is navy, figured i'd share it for you guys who aren't on #kustoms all dayWe appreciate that.
yeah this is navy, figured i'd share it for you guys who aren't on #kustoms all day
yeah this is navy, figured i'd share it for you guys who aren't on #kustoms all dayWe appreciate that.
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476781955958964244/BB4A7185-BE5D-46B3-8114-49490626FFF4.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476772101051908097/109A76E6-59F0-4B8E-97E4-B956888D2DE6.jpg)
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476781955958964244/BB4A7185-BE5D-46B3-8114-49490626FFF4.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476772101051908097/109A76E6-59F0-4B8E-97E4-B956888D2DE6.jpg)
:sweatdrops:
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476781955958964244/BB4A7185-BE5D-46B3-8114-49490626FFF4.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476772101051908097/109A76E6-59F0-4B8E-97E4-B956888D2DE6.jpg)
blue grayShow Image(https://cdn.discordapp.com/attachments/312287977151660042/476781955958964244/BB4A7185-BE5D-46B3-8114-49490626FFF4.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476772101051908097/109A76E6-59F0-4B8E-97E4-B956888D2DE6.jpg)
Is this Navy or Blue-Gray?
Also does anyone wanna trade a Navy WKL for a Navy/Black/Gray HHKB?
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476781955958964244/BB4A7185-BE5D-46B3-8114-49490626FFF4.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476772101051908097/109A76E6-59F0-4B8E-97E4-B956888D2DE6.jpg)
Is this Navy or Blue-Gray?
Also does anyone wanna trade a Navy WKL for a Navy/Black/Gray/Blue-Gray HHKB?
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476781955958964244/BB4A7185-BE5D-46B3-8114-49490626FFF4.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476772101051908097/109A76E6-59F0-4B8E-97E4-B956888D2DE6.jpg)
Is this Navy or Blue-Gray?
Also does anyone wanna trade a Navy WKL for a Navy/Black/Gray/Blue-Gray HHKB?
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476781955958964244/BB4A7185-BE5D-46B3-8114-49490626FFF4.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476772101051908097/109A76E6-59F0-4B8E-97E4-B956888D2DE6.jpg)
Is this Navy or Blue-Gray?
Also does anyone wanna trade a Navy WKL for a Navy/Black/Gray/Blue-Gray HHKB?
According to the order excel sheet, spot 96, a navy HHKB, is still available. I’d be interested in your WKL navy board but I don’t have a spot to trade :/ maybe you can ask Quan to give you spot 96 instead?
Sent from my iPhone using Tapatalk
Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476781955958964244/BB4A7185-BE5D-46B3-8114-49490626FFF4.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/476772101051908097/109A76E6-59F0-4B8E-97E4-B956888D2DE6.jpg)
Is this Navy or Blue-Gray?
Also does anyone wanna trade a Navy WKL for a Navy/Black/Gray/Blue-Gray HHKB?
According to the order excel sheet, spot 96, a navy HHKB, is still available. I’d be interested in your WKL navy board but I don’t have a spot to trade :/ maybe you can ask Quan to give you spot 96 instead?
Sent from my iPhone using Tapatalk
Yeah I've reached out to Quan about a swap, but no good news. I did reach out about this order swap with 96 though, hopefully good news
Quantrik dropped some factory shots in Discord yesterday.
Teal:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/478380231074250754/53090935-520B-413A-B69D-98AEB580D57D.jpg)
Pink:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/478378088992866304/C2971999-95D8-43A9-A0A1-97BEB9CFFF60.jpg)
Navy:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/478378088992866305/BD5A26D8-C0D0-4764-8362-4DDE6D860C52.jpg)
---
Personally I'm really pleased with how dark the navy is. Really excited now.
Quantrik dropped some factory shots in Discord yesterday.
Teal:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/478380231074250754/53090935-520B-413A-B69D-98AEB580D57D.jpg)
Pink:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/478378088992866304/C2971999-95D8-43A9-A0A1-97BEB9CFFF60.jpg)
Navy:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/478378088992866305/BD5A26D8-C0D0-4764-8362-4DDE6D860C52.jpg)
---
Personally I'm really pleased with how dark the navy is. Really excited now.
I'm really kicking myself for not going with WKL, at the time HHKB was all the rage. I wonder if the HHKB layout is going to use a 7u spacebar or a 6u off centered. Actually, did we choose a PCB with the board? Or are we supposed to supply ourselves with one, I might go with another Zeal60 if possible. I really love it on my Kira60!
Quantrik dropped some factory shots in Discord yesterday.
Teal:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/478380231074250754/53090935-520B-413A-B69D-98AEB580D57D.jpg)
Pink:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/478378088992866304/C2971999-95D8-43A9-A0A1-97BEB9CFFF60.jpg)
Navy:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/478378088992866305/BD5A26D8-C0D0-4764-8362-4DDE6D860C52.jpg)
---
Personally I'm really pleased with how dark the navy is. Really excited now.
I'm really kicking myself for not going with WKL, at the time HHKB was all the rage. I wonder if the HHKB layout is going to use a 7u spacebar or a 6u off centered. Actually, did we choose a PCB with the board? Or are we supposed to supply ourselves with one, I might go with another Zeal60 if possible. I really love it on my Kira60!
PCB was optional as case is designed for use with any standard 60% pcb. He did have the option to add a pcb which he said would just be a DZ60 I think.
I'm pretty sure the HHKB layout for this is MX HHKB which is 7u spacebar.
Would the KBD6X PCB (https://cdn.shopify.com/s/files/1/1473/3902/files/2_e86747d8-998c-4415-8116-9944ac3017b8.jpg?v=1533089963) will work with the HHKB top and plate?Think the 6x has to USB C ports on each side does it not?
Would the KBD6X PCB (https://cdn.shopify.com/s/files/1/1473/3902/files/2_e86747d8-998c-4415-8116-9944ac3017b8.jpg?v=1533089963) will work with the HHKB top and plate?Think the 6x has to USB C ports on each side does it not?
Red btw...Show Image(https://cdn.discordapp.com/attachments/312287977151660042/479489384484306946/unknown.png)
Red btw...Show Image(https://cdn.discordapp.com/attachments/312287977151660042/479489384484306946/unknown.png)
Is there an update out there at the moment?
is it too late to join this? Should I submit a form for the open spots?
More teaser pictures:
Assorted colors:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/487193174247342081/IMG_2599.JPG)
Blue Gray:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/487201361021370380/IMG_2651.JPG)
Red:Show Image(https://cdn.discordapp.com/attachments/312287977151660042/487201362426331146/IMG_2635.JPG)
---
Disclaimer: I'm not Quantrik and I do not know anything about shipping.
Oh my, those colours look amazing. Kinda regretting going for a "classic" silver colour.
Hi All,
Boards are on the way to me. Shipping estimate says they will arrive next week.
Thanks,
Quantrik
Hi All,Thanks uncle
Boards are on the way to me. Shipping estimate says they will arrive next week.
Thanks,
Quantrik
Hi All,
Boards are on the way to me. Shipping estimate says they will arrive next week.
Thanks,
Quantrik
Not sure if inappropriate to post, but will gladly delete if so. Interested in picking up a 60% w/ alu wkl/hhkb plate. Open to any color, if anyone is looking to unload. Wish I would’ve known to get in at the time.
Hi All,Wonderful news, I can't wait to get this build going
Boards are on the way to me. Shipping estimate says they will arrive next week.
Thanks,
Quantrik
Hi All,oohhh poggers. Thanks for the update!!!!
Boards are on the way to me. Shipping estimate says they will arrive next week.
Thanks,
Quantrik
So close I can smell it!I'd rather feel 'em, personally.
Thanks for the update.
I'll be willing to wait for a replacement weight if mine is affected. What's the cost of the weight we are looking at?
Confirming, this is what you mean?
45% - perfectly fine
50% - minimal damage (recipients can opt for replacements)
5% - trashed (you're ordering replacements)
Could you post photos of the affected 50% (35 photos on an imgur album). Quite concerned as I ordered 2, and we're almost 6 months in.
Hi All,
There is good news and bad news. (I feel like this is a movie script).
Good News:
I have received all of the boards and will receive the packaging materials/bumpons/screws this week.
Bad News:
As Fedex was carrying the packages to me, the package holding the weights fell apart and they hit the concrete :eek:. My rough estimates at this point are 50% of the weights have minimal damage, 45% are perfectly fine, 5% look like trash.
I do not plan to delay shipping boards to everyone to get replacement weights. I will ship your board and then you can decide whether or not you would like your weight to be replaced if you are part of the 45%. I will order replacements for the 5% ASAP.
Thankies.
(Attachment Link) (Attachment Link)
quick shots, just opened it up!
I was lucky and got mine a little early - worth the wait though guys, well done Quantrik!
Built my QXP earlier w/ Holy Chickies!Show Image(https://cdn.discordapp.com/attachments/312287977151660042/495307555380396043/IMG_20180928_135421.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/495307554608381983/IMG_20180928_135437.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/495307554608381982/IMG_20180928_135500.jpg)
First tactile board in awhile so I'm still getting used to it but it's feeling pretty damn great!
Yep that's it.Built my QXP earlier w/ Holy Chickies!Show Image(https://cdn.discordapp.com/attachments/312287977151660042/495307555380396043/IMG_20180928_135421.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/495307554608381983/IMG_20180928_135437.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/495307554608381982/IMG_20180928_135500.jpg)
First tactile board in awhile so I'm still getting used to it but it's feeling pretty damn great!
beautiful board! Just for clarification, holy chickies are halo stems with retooled blue housing and tops, right? At any rate, how are you liking them?
Built my QXP earlier w/ Holy Chickies!Show Image(https://cdn.discordapp.com/attachments/312287977151660042/495307555380396043/IMG_20180928_135421.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/495307554608381983/IMG_20180928_135437.jpg)Show Image(https://cdn.discordapp.com/attachments/312287977151660042/495307554608381982/IMG_20180928_135500.jpg)
First tactile board in awhile so I'm still getting used to it but it's feeling pretty damn great!
...ePBT BoW with Navy? Looks nice
will we be getting shipping notifications?
How do I know if I'm one of the good weights? His order form doesn't have a listing for the 50% that had a choice on replacement and I never received a shipping invoicewill we be getting shipping notifications?
you'll be billed for shipping or you have to contact him, confirm your weight is good, then pay for shipping. Shipping will have signature confirmation as well.
will we be getting shipping notifications?
you'll be billed for shipping or you have to contact him, confirm your weight is good, then pay for shipping. Shipping will have signature confirmation as well.
How do I know if I'm one of the good weights? His order form doesn't have a listing for the 50% that had a choice on replacement and I never received a shipping invoicewill we be getting shipping notifications?
you'll be billed for shipping or you have to contact him, confirm your weight is good, then pay for shipping. Shipping will have signature confirmation as well.
Sent from my VS996 using Tapatalk
If I haven't received a shipping invoice, should I assume my weight is damaged? I checked the order sheet but about a third of the orders don't have a specific status and I'm not sure how updated it is.
What does “unchecked” mean in the status?
Just finished building mine, as a heads up if you are using a pcb with a larger reset button on the bottom you might have to desolder it since there is so little room in the bottom of the case. Great board otherwise and I will update with some pictures after a bit of a glamour shoot tomorrow.Would there be room for hotswap sockets or holtites?
Just finished building mine, as a heads up if you are using a pcb with a larger reset button on the bottom you might have to desolder it since there is so little room in the bottom of the case. Great board otherwise and I will update with some pictures after a bit of a glamour shoot tomorrow.Would there be room for hotswap sockets or holtites?
Sent from my SM-G965U using Tapatalk
Looks like it wasn’t in here but someone posted theirs with a kbd 6x pcb so there shouldn’t be any problems.Just finished building mine, as a heads up if you are using a pcb with a larger reset button on the bottom you might have to desolder it since there is so little room in the bottom of the case. Great board otherwise and I will update with some pictures after a bit of a glamour shoot tomorrow.Would there be room for hotswap sockets or holtites?
Sent from my SM-G965U using Tapatalk
Sweet. Thanks for the heads up.Looks like it wasn’t in here but someone posted theirs with a kbd 6x pcb so there shouldn’t be any problems.Just finished building mine, as a heads up if you are using a pcb with a larger reset button on the bottom you might have to desolder it since there is so little room in the bottom of the case. Great board otherwise and I will update with some pictures after a bit of a glamour shoot tomorrow.Would there be room for hotswap sockets or holtites?
Sent from my SM-G965U using Tapatalk
Sent from my iPhone using Tapatalk
Hi All,
Here is album for the damaged weights. Please check the order check spreadsheet. If you see your row is RED then you need to check the album! I will also be emailing you.
http://imgur.com/a/HdtDKrK (http://imgur.com/a/HdtDKrK)
Thanks,
Quantrik
Got tired of tactiles yesterday so I swapped out the Holy Chickies I was using for the switches I removed (Catweewee 68g Tangerines) from my E6 last week!Nais. How are you liking the Tangerines?Show Image(https://i.imgur.com/vzSVtSM.jpg)
Maybe some typing sounds later today.
Yours should be good according to the list just have to be patient for shipping. Its not like he hes started another groupbuy...
Hi All,
The following cases need to be redone and will take a little more time to ship. Sorry for the inconvenience.
5, 32, 38,42, 52, 62, 66, 68, 69, 70, 86, 89, 90, 91, 93, 99
Hi All,Thanks for the update. Would you happen to have an ETA?
The following cases need to be redone and will take a little more time to ship. Sorry for the inconvenience.
5, 32, 38,42, 52, 62, 66, 68, 69, 70, 86, 89, 90, 91, 93, 99
Hi All,
The following cases need to be redone and will take a little more time to ship. Sorry for the inconvenience.
5, 32, 38,42, 52, 62, 66, 68, 69, 70, 86, 89, 90, 91, 93, 99
I sent you an email 9 days ago that I wanted to get a replacement for it. Although you did not read the mail...
so gud
(Attachment Link)
HelloI sent you an email 9 days ago that I wanted to get a replacement for it. Although you did not read the mail...
Email was for replacement weight. These numbers are for replacement case.
so gud
(Attachment Link)
Laser :'(
Hi All,Can you give us a rough estimate of what "a little more time" is? Is it a couple of weeks? Months?
The following cases need to be redone and will take a little more time to ship. Sorry for the inconvenience.
5, 32, 38,42, 52, 62, 66, 68, 69, 70, 86, 89, 90, 91, 93, 99
Will there be a round 2 for this? So bummed to have to find out about it only after orders were closed.
I just got the QXPs I ordered (#6 and #7). Originally planning on gifting one of them. But now, I'm thinking of just getting something else for the gift, and keeping both of these. They are really gorgeous.I have such deep regrets about not getting in on this board. All the photos popping up everywhere look so good!!
Hi All,
The following cases need to be redone and will take a little more time to ship. Sorry for the inconvenience.
5, 32, 38,42, 52, 62, 66, 68, 69, 70, 86, 89, 90, 91, 93, 99
Hi All,
Replacements have finished machining and will go to anodizing soon. Not many cases left to ship :).
Hope everyone is happy and I'm confident all cases will ship this year (probably before December).
Thanks,
Quantrik
Any news on the remaining keyboards?
I'm interested in another plate
Recently I've wanted to get another plate for this board and I want to check if other people are interested.
Not really sure yet about sourcing yet just want to gauge if there's any interest to go in on some kind of mini gb.
Might be looking to sell my QXP in a few weeks when I get back from my trip.Pm
It's wkl blue gray.
Taking offers
Might be looking to sell my QXP in a few weeks when I get back from my trip.
It's wkl blue gray.
Taking offers 😉
Heya Happy New Year,
Does anyone have, or has created a plate file for this QXP?
What are the odds of another drop? The milled top and low profile in blue/grey makes it one of the best cases i've seen imo
So you mean there is still a chance ;)What are the odds of another drop? The milled top and low profile in blue/grey makes it one of the best cases i've seen imo
Next to zero
You might be able to ask Quantrik for a plate file that you can get cut.Heya Happy New Year,
Does anyone have, or has created a plate file for this QXP?
I would like this as well as I need another plate
You might be able to ask Quantrik for a plate file that you can get cut.Heya Happy New Year,
Does anyone have, or has created a plate file for this QXP?
I would like this as well as I need another plate
What PCB should I get for this ?This beauty deserves Zeal60 pcb.
Sent from my PH-1 using Tapatalk
btw if using a zeal60 revision 4 you might need to separate the top part of the pcb from the switches slightly to make space for the slightly extended bit underneath the type-C port. I couldn't get it to fit when it was sitting flush.What PCB should I get for this ?This beauty deserves Zeal60 pcb.
Sent from my PH-1 using Tapatalk
Don't do this... just file the pcb near the USB port and it will fit fine.btw if using a zeal60 revision 4 you might need to separate the top part of the pcb from the switches slightly to make space for the slightly extended bit underneath the type-C port. I couldn't get it to fit when it was sitting flush.What PCB should I get for this ?This beauty deserves Zeal60 pcb.
Sent from my PH-1 using Tapatalk
There are metal prongs from the type-c port to the pcb right where you are suggesting to file the pcb. Not sure about how filing the metal contacts would affect the use of a pcb. Also the LEDs shine just as brightly even with a little separation.Don't do this... just file the pcb near the USB port and it will fit fine.btw if using a zeal60 revision 4 you might need to separate the top part of the pcb from the switches slightly to make space for the slightly extended bit underneath the type-C port. I couldn't get it to fit when it was sitting flush.What PCB should I get for this ?This beauty deserves Zeal60 pcb.
Sent from my PH-1 using Tapatalk
I've filed mine just fine lolThere are metal prongs from the type-c port to the pcb right where you are suggesting to file the pcb. Not sure about how filing the metal contacts would affect the use of a pcb. Also the LEDs shine just as brightly even with a little separation.Don't do this... just file the pcb near the USB port and it will fit fine.btw if using a zeal60 revision 4 you might need to separate the top part of the pcb from the switches slightly to make space for the slightly extended bit underneath the type-C port. I couldn't get it to fit when it was sitting flush.What PCB should I get for this ?This beauty deserves Zeal60 pcb.
Sent from my PH-1 using Tapatalk
If anyone is interested in buying a 1 of 2 teal colored WKL QXP with tactile greys then shoot me a PM :) also comes with a set of ghost white ePBT keycaps.
Anyone have info on replacement rubber feet? Would be greatly appreciated. Thanks!
Anyone have info on replacement rubber feet? Would be greatly appreciated. Thanks!
Going off the pics, looks like it uses the same 3m bumpons that every other custom uses: https://www.amazon.com/gp/product/B01ACPT2LU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1