Author Topic: [GB] TGR-910 CE - 100% Completed.  (Read 257718 times)

0 Members and 1 Guest are viewing this topic.

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1173
  • Location: Indiana, USA
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #850 on: Wed, 20 June 2018, 06:47:28 »
Mine hasn’t even shipped as of today. I sent yuktsi a PM a few days ago, but haven’t heard back from him. Maybe he’s still having finals, I don’t know. But I’d like to get mine soon or at least get a statement when he’s going to ship it.

Same. A week or so ago he told me there were a few left to ship but I have no idea when they'll go out.
keyboards.

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #851 on: Wed, 20 June 2018, 06:51:22 »
Just got my alu 910 yesterday!
I think Sam is very busy at the moment, that's why it takes him a while to reply.

Cheers ☺

Offline Velvet_Crowe

  • Posts: 70
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #852 on: Mon, 25 June 2018, 21:52:54 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?
Current daily: OTD 356mini v1 (Red) | OTD 356CL (Gunmetal) | TGR Jane V2 CE (Black) | zekk.works Ogre (Dark Grey) | Noxary Vulcan Pro (Silver/Red) | 488 Pista Spider (Red)

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #853 on: Tue, 26 June 2018, 00:13:39 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?

as in RGB LEDs on the bottom or in-switch?
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline Velvet_Crowe

  • Posts: 70
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #854 on: Tue, 26 June 2018, 08:45:30 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?

as in RGB LEDs on the bottom or in-switch?
RGB LEDs on the bottom and also for the logo

I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
Current daily: OTD 356mini v1 (Red) | OTD 356CL (Gunmetal) | TGR Jane V2 CE (Black) | zekk.works Ogre (Dark Grey) | Noxary Vulcan Pro (Silver/Red) | 488 Pista Spider (Red)

Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1176
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #855 on: Tue, 26 June 2018, 10:02:04 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?

as in RGB LEDs on the bottom or in-switch?
RGB LEDs on the bottom and also for the logo

I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
Attiny85 from any ps2avrGB PCB should work with the 910
email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline Sissy

  • Posts: 494
  • Location: Australia
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #856 on: Tue, 26 June 2018, 23:28:50 »
sent you a pm on slack yuktsi.

Offline dgneo

  • Supervillain
  • * Curator
  • Posts: 2182
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #857 on: Wed, 27 June 2018, 06:55:22 »




Arrived safe and sound :)

Offline theillumedpanda

  • Posts: 271
  • Don't point that gun at me - I'm an unpaid intern!
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #858 on: Wed, 27 June 2018, 08:41:40 »
Show Image


Show Image


Arrived safe and sound :)
That looks very cool. Patiently wating for mine.

Offline Artemisia254

  • Posts: 6
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #859 on: Wed, 27 June 2018, 13:50:47 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?

as in RGB LEDs on the bottom or in-switch?
RGB LEDs on the bottom and also for the logo

I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
Attiny85 from any ps2avrGB PCB should work with the 910
can you update some news about the PC version :) ?

Offline Velvet_Crowe

  • Posts: 70
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #860 on: Thu, 28 June 2018, 00:55:03 »
anyone know how/where i can get a polycarb plate made for this
Current daily: OTD 356mini v1 (Red) | OTD 356CL (Gunmetal) | TGR Jane V2 CE (Black) | zekk.works Ogre (Dark Grey) | Noxary Vulcan Pro (Silver/Red) | 488 Pista Spider (Red)

Offline dallman5

  • Posts: 428
  • Location: DC, USA
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #861 on: Thu, 28 June 2018, 01:11:30 »
anyone know how/where i can get a polycarb plate made for this

I’d also be interested.

I messaged yuktsi about this a while back because I saw a PC plate in a picture with the rest of the PC boards, but he told me is that he only prototyped a few.
LF: OG Cherry APL (lasered), Artisans

Current collection:
More
Norbatouch (Galaxy Blue) | Mira SE (Lunar Grey, WKL) | HHKB Pro 1 (KB300BN) | Noxary X60 (Grey, HHKB) | KBDFans 5 Degree (Silver) | AEK64 (Grey) | Norbaforce (Tactical Black, WKL)) | Realforce 86U (White) | TGR 910 RE (Polycarbonate) | LZ-SQ (Black) | LZ-CLS (Grey, WKL) | Duck Orion v1 (Silver, WK)) | Nissho KB106DE | HHKB Pro 1 (KB300B) | LZ CLS-S (Blue, Poker) | Realforce 87U 10th Anniversary) | Realforce 104UK | TGR Alice (Grey on Pink) | Singa (Blue, WKL)  | Quantrik QXP (Blue Grey, WKL) | LZ-GH v2 (Black, WK) | KMAC Happy (Red, Poker)) | IBM Model M SSK (APL) | TGR 910 SE (Pink on Blue) | GSKT-00 (Silver, Poker) | OTD Koala (Silver, WKL) | Realforce R2 PFU Edition (Ivory) | IBM 3279 Beamspring (APL) | TGR Tris (Blue) | LZ-GH v2 (Blue, WKL)) | TGR Jane v2 (Blue-grey, WKL) | LZ-MP (Shine Grey, WKL)  | TGR x Singa Unikorn (Purple) | Justsystems x Realforce 108UG) | IBM Model F Unsaver (APL) | TGR Jane V2 CE (Multicolor, WKL) | Realforce 87U (Blank Black) | Lin Montage (Light Blue, WKL) | GSKT-00 AEK R2 (Grey, HHKB) | Leopold FC660C (Blank Black) | Duck Viper v3 (Grey on Black) | Rama Works M6-C RWxRW | LZ-GH v1 (Black, WKL) | Gok 7v (Grey) | biso x beaming Kei (SS, HHKB) | zacheadams x bisoromi little z | Matrix Noah (Silver/Grey, WKL) | Lin Whale (Pink, WKL) | TGR Alice (Polycarbonate) | Rama Kara (Noct) | Lin Whale75 (Burgundy, F13) | Realforce 89 (Ivory) | Hand Engineering Haus (Bluegrey) | Haytco CAKE60_R1 (Pantone 4167C) | LZ-XE (Grey, WKL) | Noxary X60 V2 (Grey, WK) | Daji Ochocuatro (Grey, WKL) | HHKB Hybird Type-S 25th Anniversary (Snow) | LZ-REs (Grey, WKL) | Matrix 8xv 3.0 (Blue-Black/Deep Grey, WKL) | Realforce 23UB | Biso RS60 (Black, WK) | TGR x MXF Koala (Grey/Black, WKL)

Italics = Incoming, Black = Gone

Offline Jkush463

  • Posts: 367
  • Location: Aurora, IL
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #862 on: Fri, 29 June 2018, 14:16:57 »
Some one sell me one of these lol

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #863 on: Fri, 29 June 2018, 14:18:29 »
Some one sell me one of these lol

Make a classifieds for one.


Offline futurecrime

  • Posts: 1001
  • Location: London, England
  • Get Zooted
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #865 on: Mon, 02 July 2018, 07:10:33 »
x-post so sorry.






Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #866 on: Wed, 04 July 2018, 11:03:15 »
x-post so sorry.

Show Image


Show Image


Show Image


nice
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline PurpleURP

  • Posts: 41
  • Location: Texas
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #867 on: Wed, 04 July 2018, 15:31:12 »
Is there going to be another round?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #868 on: Wed, 04 July 2018, 16:02:20 »
Is there going to be another round?

he has said no

look out for typemachina
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline heckenjoni

  • Posts: 39
  • Location: Germany
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #869 on: Fri, 06 July 2018, 07:14:57 »
hey yuktsi did send you a pm on discord and an email

Offline dgneo

  • Supervillain
  • * Curator
  • Posts: 2182
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #870 on: Fri, 06 July 2018, 07:17:58 »


- Brass Plate
- Vintage MX Blacks, Cleaned/Lubed/Polycarb Film
- Clipped/Lubed/Bandaid Stabs
- IMSTO Irish Keyset









Offline hippiepete

  • Posts: 113
  • Location: Brazil
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #871 on: Sat, 07 July 2018, 17:49:19 »
damn dg thats lookin fineeeeee

Offline theillumedpanda

  • Posts: 271
  • Don't point that gun at me - I'm an unpaid intern!
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #872 on: Thu, 19 July 2018, 17:44:47 »
Which carrier did yuktsi use for your PC 910? While I have a tracking number, AfterShip recognizes it as Canadian Post, which doesn‘t seem to be correct.

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #873 on: Thu, 19 July 2018, 19:49:48 »
Which carrier did yuktsi use for your PC 910? While I have a tracking number, AfterShip recognizes it as Canadian Post, which doesn‘t seem to be correct.

The number he provides is aramex, it may convert to something else once it’s in country.

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #874 on: Thu, 19 July 2018, 20:13:23 »
Any one have any issues with the TGR-Elaine pcb having a entire row not work?

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #875 on: Fri, 20 July 2018, 10:23:59 »
Any one have any issues with the TGR-Elaine pcb having a entire row not work?

What's the TGR Elaine?

Offline zekkin

  • Posts: 508
  • my entire life was unlimited zekk works
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #876 on: Fri, 20 July 2018, 11:16:07 »
Any one have any issues with the TGR-Elaine pcb having a entire row not work?

What's the TGR Elaine?
TGR-Elaine is the Singa PCB.

Offline Randalljai

  • Posts: 128
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #877 on: Wed, 01 August 2018, 01:20:52 »
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #878 on: Wed, 01 August 2018, 07:19:26 »
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?


yuktsi might.

Offline Randalljai

  • Posts: 128
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #879 on: Wed, 01 August 2018, 10:46:40 »
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?


yuktsi might.

Yeh, I've pmed Yuktsi. Just don't want to be buying a fake or anything :( THank you

Offline AresTheGod

  • Posts: 96
  • Location: Paris, France
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #880 on: Sat, 04 August 2018, 16:15:12 »
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?

Offline theillumedpanda

  • Posts: 271
  • Don't point that gun at me - I'm an unpaid intern!
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #881 on: Sat, 04 August 2018, 17:28:36 »
How do I have to solder those LED strips or whatever they‘re called? I‘ve never done that before and was a bit irritated that I‘d have to do that myself. Or am I missing something?

Offline [Lewynlight]

  • Formerly Dymloslouire
  • Posts: 353
  • Location: Semi retired < typed at 2018, look where I am now
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #882 on: Sun, 05 August 2018, 06:53:01 »
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?

Message Kawasaki161 . he can help you.
TGR Jane V1 CE - TGR Jane v2 - TGR Jane V2 CE  - TGR 910 R1 - TGR 910 RE Polycarbonate - TGR 910v3 Prototype - TGR Police - TGR Tris - TGR Tomo Polycarbonate - RS60 - RS65 "Pendora" - RS TKL - EM8

Offline AresTheGod

  • Posts: 96
  • Location: Paris, France
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #883 on: Mon, 06 August 2018, 10:16:57 »
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?

Message Kawasaki161 . he can help you.

Thank you, just sent him a pm.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #884 on: Thu, 09 August 2018, 22:21:45 »
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?

Message Kawasaki161 . he can help you.

Thank you, just sent him a pm.

you probably just blew up a diode by accident, hope it's nothing major
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline maxf

  • Posts: 51
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #885 on: Fri, 10 August 2018, 22:42:53 »
Anyone have a extra RGB kit?  Or two?

Sent from my Pixel 2 XL using Tapatalk


Offline breckstar

  • Posts: 289
  • Location: Earther
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #886 on: Sat, 18 August 2018, 10:27:36 »
Anyone have a extra RGB kit?  Or two?

Sent from my Pixel 2 XL using Tapatalk
I didn't get the RGB kit but looking for anyone to confirm these are electronics for the RGB kit?

WS2812B - https://www.sparkfun.com/products/13667

WS2811 - https://www.adafruit.com/product/1378?gclid=CjwKCAjwh9_bBRA_EiwApObaOGsoHfbmq2gEJ308n8FYckjsXerAr6hrP98MvDDzQM1l1AnkQQ2UdxoC-6gQAvD_BwE

Don't really care about the spacer. Just want the 910 lit up.

Anyone mess with cerakoting as well? Looking to do it to mine sometime in the near future.

Edit: Anyone have the 910 plate file?
« Last Edit: Sat, 18 August 2018, 10:31:47 by breckstar »

Offline vtachkov

  • Posts: 205
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #887 on: Sat, 18 August 2018, 13:18:21 »
Anyone have a extra RGB kit?  Or two?

Sent from my Pixel 2 XL using Tapatalk
I didn't get the RGB kit but looking for anyone to confirm these are electronics for the RGB kit?

WS2812B - https://www.sparkfun.com/products/13667

WS2811 - https://www.adafruit.com/product/1378?gclid=CjwKCAjwh9_bBRA_EiwApObaOGsoHfbmq2gEJ308n8FYckjsXerAr6hrP98MvDDzQM1l1AnkQQ2UdxoC-6gQAvD_BwE

Don't really care about the spacer. Just want the 910 lit up.

Anyone mess with cerakoting as well? Looking to do it to mine sometime in the near future.

Edit: Anyone have the 910 plate file?

I can't comment on the component, but just a word of caution. Even if you don't care about the underglow, you'll still have to solder the underglow RGB LEDs because they are in a circuit, or at the very least bridge them, since the 910 logo is the last one in the circuit.

Offline Mcnos

  • Posts: 1279
    • GMK Fuyu
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #888 on: Thu, 23 August 2018, 00:19:17 »
Just a thought, does anyone know if there's a key combination to flash the PCB for the 910? Mines having issues and won't be recognized by the PC/Bootmapper

Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1176
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #889 on: Thu, 23 August 2018, 03:58:30 »
Just a thought, does anyone know if there's a key combination to flash the PCB for the 910? Mines having issues and won't be recognized by the PC/Bootmapper
PMed
email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline Mcnos

  • Posts: 1279
    • GMK Fuyu
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #890 on: Sat, 25 August 2018, 01:56:48 »
Okay confirmed that my PC hit it's death bed for who knows why. Anyone have an extra PCB/polycarb plate they have for sale?

Offline tokidokijake

  • * Destiny Supporter
  • Posts: 311
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #891 on: Thu, 01 November 2018, 14:43:15 »
Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Offline clasicks

  • Formerly KeyboardUser4
  • Posts: 785
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #892 on: Thu, 01 November 2018, 15:10:37 »
Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

Offline tokidokijake

  • * Destiny Supporter
  • Posts: 311
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #893 on: Thu, 01 November 2018, 15:17:25 »

Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

Offline clasicks

  • Formerly KeyboardUser4
  • Posts: 785
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #894 on: Thu, 01 November 2018, 15:23:39 »

Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

hrmm, i asked some folks and it looks like its probably the leds these little guys - remove them from the black and they go on the 4 pin smd pads on the PCB


and this thing is the controller for the rgb's that i called a little spider :P


Edit: Rereading your post, I just want to clarify that this is for the BACKLIGHTING. If you want inswitch LED's you dont need any of these things
« Last Edit: Thu, 01 November 2018, 15:32:04 by KeyboardUser4 »

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #895 on: Thu, 01 November 2018, 15:37:35 »

Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline tokidokijake

  • * Destiny Supporter
  • Posts: 311
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #896 on: Thu, 01 November 2018, 15:47:15 »
Gotcha. Thank you. And that underglow light is provided by?


Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #897 on: Thu, 01 November 2018, 16:08:53 »
Gotcha. Thank you. And that underglow light is provided by?


Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps

rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit

if the original buyer didn't order the rgb kit, there is no diffuser
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline tokidokijake

  • * Destiny Supporter
  • Posts: 311
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #898 on: Thu, 01 November 2018, 16:42:19 »
Thanks. I am the original buyer and have the diffuser. So at this point I just need to buy some leds correct? Any recommendations? Thanks for the help!

Gotcha. Thank you. And that underglow light is provided by?


Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps

rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit

if the original buyer didn't order the rgb kit, there is no diffuser

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #899 on: Thu, 01 November 2018, 16:58:00 »
Thanks. I am the original buyer and have the diffuser. So at this point I just need to buy some leds correct? Any recommendations? Thanks for the help!

Gotcha. Thank you. And that underglow light is provided by?


Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps

rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit

if the original buyer didn't order the rgb kit, there is no diffuser

and a rgb controller chip

im not sure of part no but i think it's in the op
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90