Author Topic: [GB] DO60 60% PCB RGB Underglow w/ Split Spacebar & Arrows (Read 25390 times)

sennin32 · « **on:** Tue, 23 January 2018, 03:29:28 »

GB link : https://shopkey.doyustudio.com/001pcb60s
FAQs : https://geekhack.org/index.php?topic=93685.msg2552722#msg2552722
We also provide other options, ie. keycap, switches, plate...etc.

This GB will end on Feb 04, 2018
All item will ship around Mid March, 2018.

Features:

Available for standard arrows
Keep Shift on the right hand
Standard Alpha / Shifted Alpha
USB Type C
20 RGB underglow LEDs presoldered
Both work with ANSI and ISO
Switches light support
Gold plated soldering pads
Split spacebar, support both Filco type 3u Spacebar and 2.75u Keycap
SMD parts pre-soldered
3u spacebar*2, use them evenly.
QMK ready
All switch LEDs with same direction, more even light

Photoelectric · « **Reply #1 on:** Wed, 24 January 2018, 21:11:49 »

Approval bump. As always, Caveat Emptor.

wixxzblu · « **Reply #2 on:** Wed, 24 January 2018, 23:01:14 »

What is the shipping to EU?

LifeZ · « **Reply #3 on:** Wed, 24 January 2018, 23:58:03 »

Im in. and 4order(2bk, 2wk and s/w)
Thanks

sennin32 · « **Reply #4 on:** Thu, 25 January 2018, 00:12:28 »

Quote from: wixxzblu on Wed, 24 January 2018, 23:01:14

What is the shipping to EU?

Around 6~8
You can check it by add it into cart, and it will shows up before check out

quaddepos · « **Reply #5 on:** Thu, 25 January 2018, 05:55:51 »

Does it support holtites? If so which ones?

bmilcs · « **Reply #6 on:** Thu, 25 January 2018, 06:03:37 »

This is tempting =).

I already have a Southpaw 65 project on the way. Dare I start a 60% too? ;P

sennin32 · « **Reply #7 on:** Thu, 25 January 2018, 21:39:00 »

Quote from: quaddepos on Thu, 25 January 2018, 05:55:51

Does it support holtites? If so which ones?

Check it here

https://www.reddit.com/r/MechanicalKeyboards/comments/7seqfj/gb_do60_pcb_for_60_rgb_underglow_mechanical/dt466fh/

sennin32 · « **Reply #8 on:** Thu, 25 January 2018, 21:41:24 »

FAQs :
Which plate fit my layout? PCB or plate mount?
Default Layout : https://goo.gl/hctK64 (Plate stabs)
ANSI & ISO w/ Arrow : https://goo.gl/RGCTYW (PCB stabs)
Universal ANSI : https://goo.gl/yLtRxF (PCB stabs)
Universal ANSI & ISO : https://goo.gl/VjNXUB (PCB stabs)
Shifted ZXCVB Universal ANSI : https://goo.gl/57AkTc (PCB stabs)
Shifted ZXCVB Universal ANSI & ISO : https://goo.gl/TzVWFH (PCB stabs)

Holtites
https://www.reddit.com/r/MechanicalKeyboards/comments/7seqfj/gb_do60_pcb_for_60_rgb_underglow_mechanical/dt466fh/

bmilcs · « **Reply #9 on:** Fri, 26 January 2018, 09:14:02 »

Is there a carbon fiber plate option for split spacebar available here or in existence period?

sennin32 · « **Reply #10 on:** Fri, 26 January 2018, 12:44:23 »

Quote from: bmilcs on Fri, 26 January 2018, 09:14:02

Is there a carbon fiber plate option for split spacebar available here or in existence period?

For now, we don't have it, but maybe in the future if many people want it.

wixxzblu · « **Reply #11 on:** Fri, 26 January 2018, 14:21:54 »

Quote from: sennin32 on Fri, 26 January 2018, 12:44:23

Quote from: bmilcs on Fri, 26 January 2018, 09:14:02
Is there a carbon fiber plate option for split spacebar available here or in existence period?

For now, we don't have it, but maybe in the future if many people want it.

It would be much more awesome of you to release FR4 and/or polycarb plate.

Oscarv77 · « **Reply #12 on:** Sat, 27 January 2018, 00:08:26 »

What about the case? Will it fit a standard 60% USB type C case?

sennin32 · « **Reply #13 on:** Sat, 27 January 2018, 14:01:56 »

Quote from: Oscarv77 on Sat, 27 January 2018, 00:08:26

What about the case? Will it fit a standard 60% USB type C case?

I think it is rare for 60% case on market support only type-c.
Most of them are universal @@

Puddsy · « **Reply #14 on:** Sat, 27 January 2018, 14:06:24 »

Quote from: sennin32 on Sat, 27 January 2018, 14:01:56

Quote from: Oscarv77 on Sat, 27 January 2018, 00:08:26
What about the case? Will it fit a standard 60% USB type C case?

I think it is rare for 60% case on market support only type-c.
Most of them are universal @@

Most are mini-B. Type C is wider than mini-B and therefore there aren't many cases that actually support it.

If the USB port is in the standard configuration, it should work with any type-c compatible case.

LifeZ · « **Reply #15 on:** Sun, 28 January 2018, 20:13:57 »

I sent email. plz, check.

sennin32 · « **Reply #16 on:** Mon, 29 January 2018, 11:20:57 »

Quote from: LifeZ on Sun, 28 January 2018, 20:13:57

I sent email. plz, check.

Replied

iFreilicht · « **Reply #17 on:** Tue, 30 January 2018, 06:09:57 »

Quote from: Puddsy on Sat, 27 January 2018, 14:06:24

Quote from: sennin32 on Sat, 27 January 2018, 14:01:56
Quote from: Oscarv77 on Sat, 27 January 2018, 00:08:26
What about the case? Will it fit a standard 60% USB type C case?

I think it is rare for 60% case on market support only type-c.
Most of them are universal @@

Most are mini-B. Type C is wider than mini-B and therefore there aren't many cases that actually support it.

If the USB port is in the standard configuration, it should work with any type-c compatible case.

There were pictures in the IC. The C-Plug just about fits into a regular case, it's very close though.

sennin32 · « **Reply #18 on:** Tue, 30 January 2018, 07:52:07 »

Quote from: iFreilicht on Tue, 30 January 2018, 06:09:57

Quote from: Puddsy on Sat, 27 January 2018, 14:06:24
Quote from: sennin32 on Sat, 27 January 2018, 14:01:56
Quote from: Oscarv77 on Sat, 27 January 2018, 00:08:26
What about the case? Will it fit a standard 60% USB type C case?

I think it is rare for 60% case on market support only type-c.
Most of them are universal @@

Most are mini-B. Type C is wider than mini-B and therefore there aren't many cases that actually support it.

If the USB port is in the standard configuration, it should work with any type-c compatible case.

There were pictures in the IC. The C-Plug just about fits into a regular case, it's very close though.

Yup.
Most of cases' cut out of port is not fit mini port perfectly.
So it should fit for most cases.
But there's some cases are design for only mini port.

Theconejo · « **Reply #19 on:** Tue, 30 January 2018, 10:38:48 »

Any pictures of the brass plate that could be added on with the pcb?

stryker09 · « **Reply #20 on:** Wed, 31 January 2018, 10:16:23 »

Signed up to say that I signed up for the case IC and will be taking the plunge on this shortly!
Great work on the pricing that includes the top plate too. Will this be making it to retail on your store eventually?

iFreilicht · « **Reply #21 on:** Wed, 31 January 2018, 16:50:46 »

Just bought my stuff, super excited to see this happening!

stryker09 · « **Reply #22 on:** Wed, 31 January 2018, 21:30:36 »

will there be an option to get a pcb without the website link? i think it looks really clean without it, at least shrink the link to a corner or somewhere less distracting?

Ponkan · « **Reply #23 on:** Sat, 03 February 2018, 20:59:55 »

Hi, I'm still waiting for the refund on my order so that I can buy 3 pcbs instead.

wixxzblu · « **Reply #24 on:** Sun, 04 February 2018, 00:37:21 »

i would like to see a GB extensio since everybody is still waiting for refunds before buying more pcbs.

sennin32 · « **Reply #25 on:** Sun, 04 February 2018, 07:43:20 »

Quote from: Ponkan on Sat, 03 February 2018, 20:59:55

Hi, I'm still waiting for the refund on my order so that I can buy 3 pcbs instead.

Hi, do you have order number?
We’ll cancel old order and you can buy again.

Quote from: wixxzblu on Sun, 04 February 2018, 00:37:21

i would like to see a GB extensio since everybody is still waiting for refunds before buying more pcbs.

🤣

Visionaire · « **Reply #26 on:** Sun, 04 February 2018, 12:12:33 »

Can you get this PCB as an add-on for the 60% case you're doing IC for now as well, or do you only get it from this GB?

Visionaire · « **Reply #27 on:** Sun, 04 February 2018, 17:28:00 »

Ordered 2!

nzhoward · « **Reply #28 on:** Tue, 06 February 2018, 08:20:17 »

I emailed with a question a few days ago. Can you take a look please?

sennin32 · « **Reply #29 on:** Tue, 06 February 2018, 09:15:37 »

Quote from: nzhoward on Tue, 06 February 2018, 08:20:17

I emailed with a question a few days ago. Can you take a look please?

I think I just read and replied all the mails during weekend couple hours ago.
Could you send pm with your mail address?
Let me check for you.

tex_live_utility · « **Reply #30 on:** Tue, 06 February 2018, 22:37:55 »

The GB page you link to gives a 404 error.

sennin32 · « **Reply #31 on:** Tue, 06 February 2018, 22:41:19 »

Quote from: tex_live_utility on Tue, 06 February 2018, 22:37:55

The GB page you link to gives a 404 error.

Hi, this groupbuy ended this week

Bizpit · « **Reply #32 on:** Thu, 08 February 2018, 17:37:26 »

sennin32 · « **Reply #33 on:** Thu, 22 February 2018, 23:29:30 »

Hi,
Everybody, thank you for join this group buy.
Lunar new year vacation just end this week and we're back.

As we discussed in IC thread (https://geekhack.org/index.php?topic=91773), we spotted a issue with type c device connection.
Which is not able to be recognized directly by a device w/ native USB type C port.
Thanks jmdaly (https://geekhack.org/index.php?action=profile;u=57757) for helping us to find issues on our board.
We've solved it before vacation, but we have to make one more prototype and make sure the board work great.
It is going have 2 weeks delay.
We're really sorry for that, but we hope we can bring people the best items!

mdaly001 · « **Reply #34 on:** Fri, 23 February 2018, 01:06:02 »

Quote from: sennin32 on Thu, 22 February 2018, 23:29:30

Hi,
Everybody, thank you for join this group buy.
Lunar new year vacation just end this week and we're back.

As we discussed in IC thread (https://geekhack.org/index.php?topic=91773), we spotted a issue with type c device connection.
Which is not able to be recognized directly by a device w/ native USB type C port.
Thanks jmdaly (https://geekhack.org/index.php?action=profile;u=57757) for helping us to find issues on our board.
We've solved it before vacation, but we have to make one more prototype and make sure the board work great.
It is going have 2 weeks delay.
We're really sorry for that, but we hope we can bring people the best items!

I screwed up by not ordering a plate. Any chance it's still possible to order a plate?

Sent from my ONEPLUS A5010 using Tapatalk

jmdaly · « **Reply #35 on:** Fri, 23 February 2018, 09:26:57 »

Quote from: sennin32 on Thu, 22 February 2018, 23:29:30

As we discussed in IC thread (https://geekhack.org/index.php?topic=91773), we spotted a issue with type c device connection.
Which is not able to be recognized directly by a device w/ native USB type C port.
Thanks jmdaly (https://geekhack.org/index.php?action=profile;u=57757) for helping us to find issues on our board.
We've solved it before vacation, but we have to make one more prototype and make sure the board work great.
It is going have 2 weeks delay.
We're really sorry for that, but we hope we can bring people the best items!

I'm glad to help and really appreciate you guys making the effort to resolve the issue! Really looking forward to doing some builds with these PCBs

iFreilicht · « **Reply #36 on:** Fri, 16 March 2018, 12:17:18 »

How's the new prototype looking?

Ponkan · « **Reply #37 on:** Sun, 18 March 2018, 19:19:09 »

Any updates? Also, can I add a bunch of MX Clears to my order and ship it together w/ the pcbs?

sennin32 · « **Reply #38 on:** Wed, 21 March 2018, 11:08:05 »

Quote from: iFreilicht on Fri, 16 March 2018, 12:17:18

How's the new prototype looking?

https://www.instagram.com/p/BgCbysUhPSj/?taken-by=doyushopkey
We made a blue one @Q@

d.caminero · « **Reply #39 on:** Thu, 05 April 2018, 10:27:30 »

Any update on the GB status?

BlindAssassin111 · « **Reply #40 on:** Fri, 13 April 2018, 15:05:18 »

Quote from: d.caminero on Thu, 05 April 2018, 10:27:30

Any update on the GB status?

Still wondering the same...

DubbleYew · « **Reply #41 on:** Sat, 14 April 2018, 11:26:10 »

Quote from: BlindAssassin111 on Fri, 13 April 2018, 15:05:18

Quote from: d.caminero on Thu, 05 April 2018, 10:27:30
Any update on the GB status?

Still wondering the same...

I think we should get an update considering we were originally told it would ship out in the middle of March. We are well over the 2 week delay given in the last update.

Sent from my SM-G955F using Tapatalk

Ponkan · « **Reply #42 on:** Tue, 17 April 2018, 03:00:24 »

Any updates?

d.caminero · « **Reply #43 on:** Wed, 18 April 2018, 03:33:29 »

I PM'd the runner shortly after my comment and they told me this:

Quote

We received the PCB, but the led is wrong.
That makes lot of led fail.
We've send back and ask manufacturer to process it again.

I guess we will have to wait a bit more.

Helldrop · « **Reply #44 on:** Fri, 20 April 2018, 13:39:40 »

April is coming to an end, I think the runner must appear on this stage.

sennin32 · « **Reply #45 on:** Sun, 22 April 2018, 09:14:33 »

Hi,
PCB manufacturer use wrong led brand.
And the temp is not correct, make lot of leds fail.
We've sent them back for replacement 2 weeks ago.
And it should already finished, manufacturer told us it will be sent around Apr 20th. we'll receive them in 1 week

Sorry for delay

iPhantomMonkey · « **Reply #46 on:** Tue, 24 April 2018, 23:17:13 »

Thanks for the update. If you are able to answer, when do you think the PCBs might be shipped out to backers, as I might need to update my shipping address depending on the eta

peggisan · « **Reply #47 on:** Tue, 24 April 2018, 23:19:40 »

Will there be any extras for sale after this concludes?

sennin32 · « **Reply #48 on:** Wed, 25 April 2018, 04:25:22 »

Quote from: iPhantomMonkey on Tue, 24 April 2018, 23:17:13

Thanks for the update. If you are able to answer, when do you think the PCBs might be shipped out to backers, as I might need to update my shipping address depending on the eta

Hi,
I think we'll pack and ship most packs before May 5th.
But I don't know which shipping method you use.
Please send us message include your order#.
I'll tell you when it should arrive

merlin64 · « **Reply #49 on:** Tue, 08 May 2018, 09:55:11 »

Are there any updates to this?

BlindAssassin111 · « **Reply #50 on:** Wed, 09 May 2018, 00:20:02 »

So...any update on when they are shipping? I sent you an email a couple days ago about it, but no answer yet. Would like to have some info seeing as it is quite a bit late now...

d.caminero · « **Reply #51 on:** Thu, 10 May 2018, 18:33:37 »

Quote from: BlindAssassin111 on Wed, 09 May 2018, 00:20:02

So...any update on when they are shipping? I sent you an email a couple days ago about it, but no answer yet. Would like to have some info seeing as it is quite a bit late now...

+1 here...

TechieWeirdo · « **Reply #52 on:** Thu, 10 May 2018, 19:53:19 »

Got an email with a tracking number.

BlindAssassin111 · « **Reply #53 on:** Sun, 13 May 2018, 20:40:25 »

Quote from: TechieWeirdo on Thu, 10 May 2018, 19:53:19

Got an email with a tracking number.

I still have nothing...Hopefully I get something soon.

merlin64 · « **Reply #54 on:** Tue, 15 May 2018, 22:54:01 »

Bumping this up for visibility. Sennin I would like an update please.

BlindAssassin111 · « **Reply #55 on:** Tue, 15 May 2018, 22:56:20 »

Quote from: merlin64 on Tue, 15 May 2018, 22:54:01

Bumping this up for visibility. Sennin I would like an update please.

Same...

BlindAssassin111 · « **Reply #56 on:** Thu, 17 May 2018, 18:23:25 »

Okay, so I went on the Doyu discord to see if by chance there was info from him.

Seems he is only shipping 1 PCB per day atm as they have to manually check each board for functionality because the manufacturer used the wrong soldering temp. Because of this he has only sent about 40% of the orders so far, which sucks for the 60% of us haven't received a shipment notification, as we get to wait even longer...

Wish he would make the update himself, but that is the info straight from his comments.

tex_live_utility · « **Reply #57 on:** Thu, 17 May 2018, 20:03:13 »

Quote from: BlindAssassin111 on Thu, 17 May 2018, 18:23:25

Okay, so I went on the Doyu discord to see if by chance there was info from him.

Seems he is only shipping 1 PCB per day atm as they have to manually check each board for functionality because the manufacturer used the wrong soldering temp. Because of this he has only sent about 40% of the orders so far, which sucks for the 60% of us haven't received a shipment notification, as we get to wait even longer...

Wish he would make the update himself, but that is the info straight from his comments.

That sucks! Really appreciate the dedication.

Would you mind sharing a link to their Discord?

BlindAssassin111 · « **Reply #58 on:** Thu, 17 May 2018, 20:12:01 »

Quote from: tex_live_utility on Thu, 17 May 2018, 20:03:13

That sucks! Really appreciate the dedication.

Would you mind sharing a link to their Discord?

Yes it does, hopefully it goes quick, as I am tired of waiting tbh...

The discord link is in his signature. (https://discord.gg/YkrdMpy)

sennin32 · « **Reply #59 on:** Fri, 18 May 2018, 23:59:52 »

Quote from: merlin64 on Tue, 08 May 2018, 09:55:11

Are there any updates to this?

Sent yours several days ago, should receive soon XD

yonghf · « **Reply #60 on:** Tue, 22 May 2018, 07:40:36 »

Any updates on PCB? I sent an email and messaged on Facebook enquiring on my order?

kekstee · « **Reply #61 on:** Mon, 28 May 2018, 08:21:18 »

Got mine this morning. Good looking non-glossy black.

The soldering job on some of the RGBs is a bit messy and D15 and CL19 are straight up missing. What's the RGB led ~~resistor~~capacitor I should place there?
Standard mapping is weird, haven't had the time to look at the matrix yet. Is that code pushed to a TMK or QMK branch somewhere?

bandreadygoband · « **Reply #62 on:** Mon, 28 May 2018, 16:58:43 »

Every day I check this thread there's a new upsetting update. Really thinking I should have just went with a DZ60 from KBDFans... Albeit this is my first GB besides GMK 9009 and that went extremely smoothly.

kekstee · « **Reply #63 on:** Mon, 28 May 2018, 17:42:04 »

Friend got a DZ60 on which not all pin holes were drilled through. So it's not like everything has always been completely stellar over there either.

merlin64 · « **Reply #64 on:** Tue, 29 May 2018, 13:12:06 »

You guys can make hex files using the QMK Toolbox here: https://config.qmk.fm/#/do60/LAYOUT_all

Please be advised that the diode for Fn on split right shift is also in the wrong orientation. Sigh..

Visionaire · « **Reply #65 on:** Thu, 31 May 2018, 09:02:43 »

Kinda glad I cancelled my GB on this. So many issues and unclear communication. Hope those that got theirs are able to make 'em work. =/

bandreadygoband · « **Reply #66 on:** Thu, 31 May 2018, 10:48:33 »

Has everyone who has received their PCB also got a tracking number? It's almost June and I haven't got one yet, I'm starting to wonder if the seller is just sending them out without tracking. Which is fine, I just want to know if I should be expecting it without an email

BlindAssassin111 · « **Reply #67 on:** Thu, 31 May 2018, 11:09:22 »

Quote from: bandreadygoband on Thu, 31 May 2018, 10:48:33

Has everyone who has received their PCB also got a tracking number? It's almost June and I haven't got one yet, I'm starting to wonder if the seller is just sending them out without tracking. Which is fine, I just want to know if I should be expecting it without an email

I am wondering the same...Still have not received my tracking yet.

bandreadygoband · « **Reply #68 on:** Sun, 03 June 2018, 10:57:47 »

Quote from: BlindAssassin111 on Thu, 31 May 2018, 11:09:22

Quote from: bandreadygoband on Thu, 31 May 2018, 10:48:33
Has everyone who has received their PCB also got a tracking number? It's almost June and I haven't got one yet, I'm starting to wonder if the seller is just sending them out without tracking. Which is fine, I just want to know if I should be expecting it without an email

I am wondering the same...Still have not received my tracking yet.

Checked the last few weeks on the Discord... The seller seems fairly active on there. Odd. There was on user who got his without a tracking number. And on May 21st, the seller said they should "all be shipped in 1-2 weeks", and tomorrow will be 2 weeks from the post. Also, 25-30 PCBs were "ready to be shipped" as of last night?

bluesclera · « **Reply #69 on:** Mon, 04 June 2018, 08:59:59 »

Got my tracking info via email today in case anyone is curious.

bandreadygoband · « **Reply #70 on:** Mon, 04 June 2018, 09:13:31 »

Quote from: bluesclera on Mon, 04 June 2018, 08:59:59

Got my tracking info via email today in case anyone is curious.

Same here! A few more on the discord have been getting theirs as well.

kekstee · « **Reply #71 on:** Tue, 05 June 2018, 06:04:57 »

Quote from: kekstee on Mon, 28 May 2018, 08:21:18

The soldering job on some of the RGBs is a bit messy and D15 and CL19 are straight up missing. What's the RGB led ~~resistor~~capacitor I should place there?

Since apparently nobody gives a **** about this thread, could the discord people please dig up which parts I need to get the damn thing operational?
I need the type/package size of the SMD diodes as well as the capacitor value that's installed next to each RGB LED. (D15 and CL19, specifically)

Spaghetti · « **Reply #72 on:** Tue, 05 June 2018, 12:17:12 »

I still haven't received any tracking info for this one $:-\$

d.caminero · « **Reply #73 on:** Wed, 06 June 2018, 14:01:46 »

I still have nothing about my order either.

merlin64 · « **Reply #74 on:** Wed, 06 June 2018, 14:26:12 »

Quote from: kekstee on Tue, 05 June 2018, 06:04:57

Quote from: kekstee on Mon, 28 May 2018, 08:21:18
The soldering job on some of the RGBs is a bit messy and D15 and CL19 are straight up missing. What's the RGB led ~~resistor~~capacitor I should place there?
Since apparently nobody gives a **** about this thread, could the discord people please dig up which parts I need to get the damn thing operational?
I need the type/package size of the SMD diodes as well as the capacitor value that's installed next to each RGB LED. (D15 and CL19, specifically)

You can join his discord server at https://discord.gg/YkrdMpy

LifeZ · « **Reply #75 on:** Tue, 19 June 2018, 02:26:55 »

I received the tracking number but there is no movement after May 30th. from Taiwan

FailureToLoad · « **Reply #76 on:** Fri, 22 June 2018, 05:49:35 »

Were there any other updates to supported layouts? Because I cannot seem to get 1.25-1.25-1.25-3.0-2.75-1.25-1.25 to slot correctly.

Awful Aim · « **Reply #77 on:** Fri, 06 July 2018, 09:17:48 »

Have these all shipped? I haven't received tracking yet.

wixxzblu · « **Reply #78 on:** Fri, 06 July 2018, 10:28:04 »

I got mine already, and i did a pcb mount clear tray build with it

iPhantomMonkey · « **Reply #79 on:** Fri, 06 July 2018, 13:03:23 »

I've also received mine and tested it to verify it worked. But it didn't stand up to the stress of putting it together, two columns broke in the process, I can't figure out where, it's not like I'm inexperienced so I don't think it was me. I wish there wasn't so many difficulties with this manufacturer.

merlin64 · « **Reply #80 on:** Fri, 06 July 2018, 13:25:54 »

What do you mean by two columns broke?

theillumedpanda · « **Reply #81 on:** Fri, 06 July 2018, 14:17:36 »

I‘ve been looking for a black 60% QMK-powered PCB, but couldn‘t find one. Are there any leftovers?

iPhantomMonkey · « **Reply #82 on:** Fri, 06 July 2018, 15:20:13 »

Quote from: merlin64 on Fri, 06 July 2018, 13:25:54

What do you mean by two columns broke?

They just didn't work after I soldered the switches in. I used a multimeter to cherry the connections between the switches and they were continuous so I don't know what happened if maybe somehow the column lost connection with the controller or what

d.caminero · « **Reply #83 on:** Sun, 08 July 2018, 16:38:03 »

still haven't received mine. I received an email saying they ran out of black pcb's and if it was okay for me to get a white one, aswered the next day but nothing new since then...

Spaghetti · « **Reply #84 on:** Sun, 08 July 2018, 18:05:14 »

Still haven't received mine. I've had no shipping notifications or contact of any kind.

sennin32 · « **Reply #85 on:** Sun, 15 July 2018, 06:02:57 »

Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough

)
If you guys haven't received your pcb, please tell me

Awful Aim · « **Reply #86 on:** Tue, 17 July 2018, 09:36:31 »

Quote from: sennin32 on Sun, 15 July 2018, 06:02:57

Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough )
If you guys haven't received your pcb, please tell me

I haven't received mine. PMing you as well.

EDIT: Wait, I ordered the Chiwi60, I bet the PCB is coming with that order. Whoops.

tex_live_utility · « **Reply #87 on:** Wed, 18 July 2018, 07:14:56 »

Got an email on June 15 asking if I was willing to change the PCB color from black to white, but I have not heard anything since then.

sennin32 · « **Reply #88 on:** Wed, 18 July 2018, 09:18:49 »

Hi,
Could you tell me your order #?
We didn't get reply for 3 orders O_Q
Not sure if the mail system lost it.

d.caminero · « **Reply #89 on:** Thu, 19 July 2018, 14:23:22 »

Quote from: sennin32 on Sun, 15 July 2018, 06:02:57

Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough )
If you guys haven't received your pcb, please tell me

Hey there,
I have yet to receive my PCB. You told me via email that it was sent and I asked for a tracking number, but got no response since then. Could you PM me the tracking number please?

Thanks!

sennin32 · « **Reply #90 on:** Tue, 11 September 2018, 02:17:18 »

We've made 2nd batch.
and LED works nice this time

sennin32 · « **Reply #91 on:** Sat, 15 September 2018, 06:20:45 »

Hi,
The Group has ended several months ago.
We got some extra PCBs.
If you missed this groupbuy but still want to get one.
Check it here : https://shopkey.doyustudio.com/001pcb60

News:

Author Topic: [GB] DO60 60% PCB RGB Underglow w/ Split Spacebar & Arrows (Read 25390 times)