LightSaver V2 Group Buy

[Blackehart]

Oh yeah!

How do we go about getting them fancy acrylic doodads for the side thingiemajigs?

[digi]

Is there a way to map media keys (volume up/down) or is the mapping option for media keys in the software for Mac's only? I have Winders.

[blighty]

Anyone know if the 02D keymapper software can enable usage under BIOS?

[Blackehart]

ok, so...

The default led toggles are INS and F6 and F7?

I'm not getting anything when I hold down INS and press and hold F6 or F7.

I haven't flashed anything, this is still default. I just popped on some keys to test it.

[blighty]

ok, so...

The default led toggles are INS and F6 and F7?

I'm not getting anything when I hold down INS and press and hold F6 or F7.

I haven't flashed anything, this is still default. I just popped on some keys to test it.

I don't think there is a "default" led control.  I was only able to adjust the LEDs once I had set buttons for the various functions (I put the light controls in the FN layers).

[digi]

flash it with the o2d keymapper software, the layers used in their default '02D Lightsaver Custom v1.x' will get you started..

[Blackehart]

well, i tried a link that elton suggested a few pages back, but i can't get the o2d mapper to connect...

[digi]

well, i tried a link that elton suggested a few pages back, but i can't get the o2d mapper to connect...

Did you download the Guide that Elton posted on page 29?

[Blackehart]

yes.

I think my issue is that i need to remap and save before i do that.
But I have no idea how to do a correct mapping or one that makes sense.

Could someone perhaps share their hex?
I just need access to the led modes and such, dont care for macors and other stuffs.


EDIT: im on a winkey layout, with insert, delete,home, end, page up and page down going from left to right after the F12 key.

Thanks in advance,

-Blacke

[digi]

yes.

I think my issue is that i need to remap and save before i do that.
But I have no idea how to do a correct mapping or one that makes sense.

Could someone perhaps share their hex?
I just need access to the led modes and such, dont care for macors and other stuffs.


EDIT: im on a winkey layout, with insert, delete,home, end, page up and page down going from left to right after the F12 key.

Thanks in advance,

-Blacke

Try to map FN1 & FN3 on Layer 1 instead of using the MFN key, let me know if that works.

If that doesn't work, pm me a pic of your layout and I'll make a .hex file for ya.

[Blackehart]

Digi is the man!


Also, how bout them acrylic side pieces?
Anyone know a shop or somebody that sells them?

[taylordcraig]

Digi is the man!


Also, how bout them acrylic side pieces?
Anyone know a shop or somebody that sells them?

Someone was looking at getting them made for v1 and v2 a while ago. Cant remember who.
Someone should figure it out!

[elton5354]

I think I can do it from my secret source. Will be shipped to me and I will distribute it. Not sure about cost yet.

[LechnerDE]

My Lightsaver was delivered today!

I won't be home for another 3 weeks, so I can't even test it

Feels like torture 

[dragonken]

I found one minor bug in the v1.5.333 keymapp. If all LEDs are turned off by the 'LED CTRL', the num lock key LED cannot light on.

I have to turn on the LED by 'LED CTRL' -> press num lock key twice to get it back.

dragonken

[digi]

I found one minor bug in the v1.5.333 keymapp. If all LEDs are turned off by the 'LED CTRL', the num lock key LED cannot light on.

I have to turn on the LED by 'LED CTRL' -> press num lock key twice to get it back.

dragonken

yes, I noticed the same result.

[seedvd]

Whoo! I ordered a  Lightsaver V2 today from GB outside of this site.

[animaliaparadoxa]

Whoo! I ordered a  Lightsaver V2 today from GB outside of this site.

And where would that be? If you don't mind telling.

[taylordcraig]

Whoo! I ordered a  Lightsaver V2 today from GB outside of this site.

And where would that be? If you don't mind telling.

yeah, is this legit?
i mean i have mine pretty close to secured [minus my funds D:] but that seems interesting, maybe I could use another case or pcb....

[taylordcraig]

edit LOL

[bianco]

grabbed a colepack and deep beats. added 1 more of space bar to my order

i think you meant to post this in the pulse gb

[feizor]

Whoo! I ordered a  Lightsaver V2 today from GB outside of this site.

And where would that be? If you don't mind telling.

yeah, is this legit?
i mean i have mine pretty close to secured [minus my funds D:] but that seems interesting, maybe I could use another case or pcb....

Hmm guy with 5 posts suggests external site.

[seedvd]

Yeah, it is for real. Take a look at the GB: http://kbdlab.co.kr/index.php?mid=board_gb_do&document_srl=412282.

[taylordcraig]

Yeah, it is for real. Take a look at the GB: http://kbdlab.co.kr/index.php?mid=board_gb_do&document_srl=412282.

anyone speak korean help me out here?
is it possible to order just a case/plate/pcb? i might get a couple more parts

[seedvd]

I am waiting for his reply if i can give you his email. I'd be glad to help you. Just wait. He said he has few left.

[cyberwave]

I am waiting for his reply if i can give you his email. I'd be glad to help you. Just wait. He said he has few left.

do share! been looking for 1 all this time!

[seedvd]

I am sorry to tell you that he is not able to take orders this time because there is no left now.  I think I am the last person to take last one.

[StylinGreymon]

In regards to the keymapping software, is there a way to choose which character resides on the 'shift layer'? (I dunno what you actually call it)
Take ;: for example.
Is there a way to make it so I have to press shift for ; and have : be the default?

Currently I achieve this just fine with xmodmap, so it's no big deal, but it'd be great to have a keyboard-side solution.

[digi]

In regards to the keymapping software, is there a way to choose which character resides on the 'shift layer'? (I dunno what you actually call it)
Take ;: for example.
Is there a way to make it so I have to press shift for ; and have : be the default?

Currently I achieve this just fine with xmodmap, so it's no big deal, but it'd be great to have a keyboard-side solution.

I think what you might be looking to do is put : on layer 1 & ; on layer 2 then just map the layer toggle or layer number to any key you want, does that work?

[StylinGreymon]

In regards to the keymapping software, is there a way to choose which character resides on the 'shift layer'? (I dunno what you actually call it)
Take ;: for example.
Is there a way to make it so I have to press shift for ; and have : be the default?

Currently I achieve this just fine with xmodmap, so it's no big deal, but it'd be great to have a keyboard-side solution.

I think what you might be looking to do is put : on layer 1 & ; on layer 2 then just map the layer toggle or layer number to any key you want, does that work?

That seems a little unwieldy...
It'd throw off all my layers a little.
If that's the solution, would that mean that I'd need to set every secondary character like that?

[digi]

In regards to the keymapping software, is there a way to choose which character resides on the 'shift layer'? (I dunno what you actually call it)
Take ;: for example.
Is there a way to make it so I have to press shift for ; and have : be the default?

Currently I achieve this just fine with xmodmap, so it's no big deal, but it'd be great to have a keyboard-side solution.

I think what you might be looking to do is put : on layer 1 & ; on layer 2 then just map the layer toggle or layer number to any key you want, does that work?

That seems a little unwieldy...
It'd throw off all my layers a little.
If that's the solution, would that mean that I'd need to set every secondary character like that?

I haven't had a chance and tinker with macro's in the software but that might be what you're looking for?

[StylinGreymon]

In regards to the keymapping software, is there a way to choose which character resides on the 'shift layer'? (I dunno what you actually call it)
Take ;: for example.
Is there a way to make it so I have to press shift for ; and have : be the default?

Currently I achieve this just fine with xmodmap, so it's no big deal, but it'd be great to have a keyboard-side solution.

I think what you might be looking to do is put : on layer 1 & ; on layer 2 then just map the layer toggle or layer number to any key you want, does that work?

That seems a little unwieldy...
It'd throw off all my layers a little.
If that's the solution, would that mean that I'd need to set every secondary character like that?

I haven't had a chance and tinker with macro's in the software but that might be what you're looking for?

I haven't been able to get macros working at all with my Light Pad, and I won't have another Duck board to try them on until I get my Viper, so I dunno if that'll work.
Thanks for trying to help, though

[Blackehart]

*poke*

*poke*

Them acrylic pieces...

MUST HAZ!

[elton5354]

I can get the side inserts for $4 a pair.  I'll make an order form tomorrow.

Only normal ones, not sand blasted (frosted) ones.

[tuantruong]

I can get the side inserts for $4 a pair.  I'll make an order form tomorrow.

Only normal ones, not sand blasted (frosted) ones.

May we have options for lightsaver v1 and orion?

[elton5354]

I'll cover all their keyboard that can use the inserts.

[witbliz]

Thank u Elton !

[tuantruong]

I'll cover all their keyboard that can use the inserts.

Sweet, thanks Elton.

[JaccoW]

Yay! Orion here we come!

[elton5354]

Fill up form here if interested in the side inserts

https://docs.google.com/forms/d/1JF3Z_Wox5JC7_Fcla1fHPLuZURSXM9OdYFvwBs78DLo/viewform

[JaccoW]

Done!

[elton5354]

Each set comes with 2 inserts, so if you put 2 you will get 4.

[JaccoW]

That's the idea.
I will be trying to frost one set myself using sandpaper and patience.

[HoffmanMyster]

Filled out the form.   

Excited to see the insert GB get rolling. 

[tuantruong]

Found an instruction about frosting the clear acrylic 
http://www.instructables.com/id/Music-LED-Light-Box/step3/Frosting-and-Diffusing/

[digi]

chea!

[Blackehart]

SCORE!

[LechnerDE]

What's the major advantage of these inserts?

Is the light spread better? Can somepne provide comparison pics please?

I am not sure if I need these for my Lightsaver V2 

[digi]

What's the major advantage of these inserts?

Is the light spread better? Can somepne provide comparison pics please?

I am not sure if I need these for my Lightsaver V2 

For dat swag lyfe, Lechner!

[elton5354]

You can see the difference in photoelectric's album.

https://m.flickr.com/#/photos/photoelectric_effect/sets/72157640117516876/