Been waiting for these but where's the fourth one????
They had to stop the 4th one, never made it to sales.
I grabbed the ancient! Love those big eyes!
I grabbed the ancient! Love those big eyes!
Just grabbed the Ancient and Butcher. They look so damn nice, how could you miss out on owning these viscous looking babies 8) .
Besides I've always missed out before on getting some Artisan keys but NOT THIS TIME.
There are not many left...given the speed at which these are selling out I would tend to think they would hold their value if not go up.
There are not many left...
Vicious, not viscous :D
There are not many left...
Please Boiler, make sure my order got through because I do not want a refund because I missed out on getting them :'( .
Vicious, not viscous :D
Sorry forgot my spell checker......... ??? . But yes, definitely VICIOUS !
There are not many left...given the speed at which these are selling out I would tend to think they would hold their value if not go up.
Lol, pulled the trigger on Exoskull even before this answer but thanks for the heads up, dood. It's practically a Terminator keycap <3 It seems I'm the only one that likes the Exoskull one. LOL! Everyone else is grabbing the Butcher and Ancient.
GAWD I can't wait to see those eyes glow on the Ducky Shine II with the glowing/strobe effect!
How do you check the stock count of them?
Vicious, not viscous :D
Sorry forgot my spell checker......... ??? . But yes, definitely VICIOUS !
;D didn't mean to be rude, just thought was a funny mistake. :p
I got the exoskull and butcher.
I got the exoskull and butcher.
Yeeah. Almost thought I was some loser with poor taste for a moment :P JK.
Ppl, help me decide on my 2nd one before time runs out. Ancient or Butcher?
;D didn't mean to be rude, just thought was a funny mistake. :p
I got the exoskull and butcher.
Yeeah. Almost thought I was some loser with poor taste for a moment :P JK.
Ppl, help me decide on my 2nd one before time runs out. Ancient or Butcher?
My vote is butcher, looks the meanest.
My vote is butcher, looks the meanest.
This. That's the reason why I didn't get the Ancient.
Looks like it'll be the Butcher. I'll give it a few more mins... *prays it doesn't sell out*
Boiler is the ONLY one that can tell you how much he has in stock. BUT I didn't want to wait out in case he only has a limited amount.
I so hate getting the OUT OF STOCK email >:( .
Uh oh... it says The Butcher is now sold out :(
Should have trusted me!
Well hurry and get an ancient!
Elrick, your vote on my second? Butcher or Ancient? :p
i got from DuckyNordic for pre-sale , sample color looks like gold but thumbnail is real color(metal silver)
face is not clear finished.
Get the ANCIENT one. It's just a skull without the jaw bone piece. It's a far better looking Skull than what's produced by the Click Clack Factory 8) .
Should have trusted me!
Well hurry and get an ancient!
Hehe, done! I should have! I bought/paid for The Ancient and came back to see your comment :P The Butcher would've been nice but The Ancient is just as cool; I love the fact that all 3 are cool in their own distinct styles!
Just found this video! After watching this video, I'm kind of glad I got The Ancient, looks so damn nice! Personally I would've preferred the horns to be pointy on The Butcher. Too bad The Maniac didn't get released :(
http://www.youtube.com/watch?feature=player_embedded&v=IVXnOuLyjQI
DAT maniac!!!!!! Wtf!!!!!!
i got from DuckyNordic for pre-sale , sample color looks like gold but thumbnail is real color(metal silver)
face is not clear finished.
What did you mean by they are not "clear finished"?? "Clean with wet tissue"? Are they dirty or something?
Damn I hope it isn't any of that Keyboard Love Juice spilt onto these keys :o ?
Got these in the pre-sale over at Deskthority. Really nice pieces, you wont be disappointed when they arrive. They are quite big however e.g. they won't fit on the top row of my filco tenkeypad.
DAT maniac!!!!!! Wtf!!!!!!
Yeha. The Maniac is pretty damn cool but honestly, the skulls seem to be more detailed and intricate. However, the Maniac would've been awesome for Jason/slasher fans :P
That I am. I've been trying to get girldc to make a Jason cap for months.
They are quite big however e.g. they won't fit on the top row of my filco tenkeypad.
They are quite big however e.g. they won't fit on the top row of my filco tenkeypad.
But they should fit in the ESC position, right?
That is the ONLY place were they shall inhabit the keyboard. A stern, serious, no crap taking position 8) .
What if you have more than one of them :o?
I know what is meant by the 'clear finished' comment , they don't look clean/shiny/new like Girldc's caps, these look a bit more rustic.
Ok pictures as requested by vesper, got a few shots jut now. I don't have anything backlit at the moment, I'm waiting on the phantom build! I didn't purchase the ancient, something about it I didn't like
It might clean them a bit, but I think that the process of creating the kecap has left battlescars on them. I don't really know how to describe it.
Not sure if this picture helps, you'll see for yourself soon enough :P
They are quite tight
Just Great i3oiler. Now I'm gonna have to watch all the Austin Powers movies again. Thanks a lot!!!
Toight like a ToigerShow Image(http://l.yimg.com/eb/ymv/us/img/hv/photo/movie_pix/new_line_cinema/austin_powers_in_goldmember/mike_myers/goldmember.jpg)
I'ma dyin' hurr. Will it come Friday/Saturday or Monday :( I hope the post does some crazies and brings them to me sooner!If there's one thing you can count on its that i3oiler sends his products out almost instantly. Sometimes he's just too fast and you can't edit your orders! But I ain't mad!
If there's one thing you can count on its that i3oiler sends his products out almost instantly. Sometimes he's just too fast and you can't edit your orders! But I ain't mad!
If there's one thing you can count on its that i3oiler sends his products out almost instantly.
Yep you can count on this guy to deliver. I have never lost any packages when he's in charge. A very trustworthy individual no matter what you buy off him 8) .
Funny hearing everyone's opinions. The ones some people love, others hate. I personally think "the ancient" is the best. And I'm sure MANY of you disagree with me.
Glad I got one before it sold out. I think it should be in the mail tomorrow.
Didn't even look at my PM
T_T
Didn't even look at my PM
T_T
You think I miss a PM? I got your back bro
I personally think "the ancient" is the best. And I'm sure MANY of you disagree with me.
Glad I got one before it sold out. I think it should be in the mail tomorrow.
I wish I had one
I wish I had one
Ok here is mine...
(Attachment Link)
I honestly don't know
Maybe try to rub a bit of it under the cap and see what happens?
Elrick, your vote on my second? Butcher or Ancient? :p
Get the ANCIENT one. It's just a skull without the jaw bone piece. It's a far better looking Skull than what's produced by the Click Clack Factory 8) .
I personally think "the ancient" is the best. And I'm sure MANY of you disagree with me.
Glad I got one before it sold out. I think it should be in the mail tomorrow.
Same here, I like the Ancient as well but the "Butcher" kind of looks like me hence I had to buy it :D .
I think these Skulls will be properly accessed once received and I think they are way above in design/quality than any lame 'Click Clack' that was ever made.
I'm now ready for the onslaught of 'Clackers' wanting retribution over my statement :o ;) :o .
To bad you never saw the other skulls cc made. I have a feeling if you like these ones you would die for the clacks original metal keys. Say what you will, but these provide no comparison to a click clack. I think they're nice, like in a really good runner up sort of way. They really show his influence on the industry. The gnomes in the factory should be flattered.
The murderer or whatever one didnt get made was pretty cool. Anyone know the details as to why it didn't make it to mass production?
Glad u guys like them :)
...and Australia wow. Really fun to see how the skulls get to see the world and places id like to visit but have never had the chance :D
Glad u guys like them :)
...and Australia wow. Really fun to see how the skulls get to see the world and places id like to visit but have never had the chance :D
Glad u guys like them :)
...and Australia wow. Really fun to see how the skulls get to see the world and places id like to visit but have never had the chance :D
Love the way my ancient looks but the stem on mine is just really loose. The cap sort of just sits on the switch free to come off if the board is tipped/bumped etc. even painters tape three layers thick doesn't do the job. I'll figure something out.
Love the way my ancient looks but the stem on mine is just really loose. The cap sort of just sits on the switch free to come off if the board is tipped/bumped etc. even painters tape three layers thick doesn't do the job. I'll figure something out.
Love the way my ancient looks but the stem on mine is just really loose. The cap sort of just sits on the switch free to come off if the board is tipped/bumped etc. even painters tape three layers thick doesn't do the job. I'll figure something out.
Hi m8,
Metal stem is a tricky one. Just a tad too little and it dont fit at all, just a tad too much and it can be loose. Its unforgiving.
Usually our metal stems are actually pretty tight. If theres a very visible fault on the stem you could take a pic of it and send to techkeys. I will send some replacement caps to techkeys at some point...so anyone with a major fault on a stem can get theirs replaced.
It's all good. I have a bunch of metal caps and not a single one fits perfect so I get it. I'm thinking a little duct tape piece might do the trick. The stem is in perfect condition so there is no damage. Sounds common enough, so a home remedy will need to do.Love the way my ancient looks but the stem on mine is just really loose. The cap sort of just sits on the switch free to come off if the board is tipped/bumped etc. even painters tape three layers thick doesn't do the job. I'll figure something out.
Hi m8,
Metal stem is a tricky one. Just a tad too little and it dont fit at all, just a tad too much and it can be loose. Its unforgiving.
Usually our metal stems are actually pretty tight. If theres a very visible fault on the stem you could take a pic of it and send to techkeys. I will send some replacement caps to techkeys at some point...so anyone with a major fault on a stem can get theirs replaced.
http://www.techkeys.us/artisan-keys.php
Sixshooters. It's happening~
I wonder if some candle wax might help. Use the wax when mushy, let it set inside stem (or use it when mushy for a stronger fix - removal using a lighter/ focussed heat source on metal to gently heat wax) , and then gently mount keycap onto switch.
Don't know if this will work for these keys as I don't have one but for me it creates a snug fit on other metal keys I have. At worst I use a tooth pick to remove the wax.
I wonder if some candle wax might help. Use the wax when mushy, let it set inside stem (or use it when mushy for a stronger fix - removal using a lighter/ focussed heat source on metal to gently heat wax) , and then gently mount keycap onto switch.
Don't know if this will work for these keys as I don't have one but for me it creates a snug fit on other metal keys I have. At worst I use a tooth pick to remove the wax.
I wonder if some candle wax might help. Use the wax when mushy, let it set inside stem (or use it when mushy for a stronger fix - removal using a lighter/ focussed heat source on metal to gently heat wax) , and then gently mount keycap onto switch.
Don't know if this will work for these keys as I don't have one but for me it creates a snug fit on other metal keys I have. At worst I use a tooth pick to remove the wax.
I have just used a thin piece of paper before and that worked. But yeah, loose fitting keycaps is also one of my pet peeves. If they are on keys you generally do not use, like Print Screen on whatever, then it is fine. But on something like an escape it just bothers me too much to keep it on there.